Engineering Jobs in Manchester Connecticut
62 positions found
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
You will have an opportunity to guide the process of planning and designing capabilities to maximize the value of IT and enable the company to make high impact, long-term decisions.
This will be accomplished through architecture strategies, blueprints and road maps that standardize technology stacks which create engineering speed and agility through the innovative use of data science, data analytics, cloud and API’s.
The EA will work with a team that embrace diversity in all of its forms, respect and have fun.
The Team The MassMutual Enterprise Architecture team in the Enterprise Technology and Experience organization is seeking an outstanding Enterprise Architect (Application) to join our team.
Enterprise Architecture is composed of Business, Application, Infrastructure, Technology & Design and Security architecture domains.
Joining this team will give the Application EA a unique perspective and opportunity to partner with best-in-class architects on enterprise wide technology initiatives.
The Impact: This role will work with IT and Business stakeholders of business delivery teams, engineers, application operations, product managers, and enterprise stakeholders to help deliver innovative, data-driven systems aimed at transforming the insurance industry.
As part of the application architecture team, incumbents may be responsible for any of the following: Partner with senior leaders to develop and maintain the Technology strategies & roadmap focused on Wealth Management Manage a domain(s) of the MassMutual Application Portfolio Management data for quality Technical evaluations and benchmarking of core application platforms, frameworks and technologies Specification and publication of standards around application design and software engineering best practices Thought leadership and active participation in conferences and research with strategic partners and academic institutions Partner with business executives and senior architects to identify data and process issues, then provide solution options and recommends options Provide recommendations on system options, risks, cost/benefit analysis, and impact on cross-domain systems, business strategy, goals and processes Engage in SA problem solving, snapshots and full architecture documents Actively publish deliverables, and utilizes multi-media to educate and engage with federated solution architecture community members Collaborate with extended enterprise architecture, business, and IT support teams to communicate architecture strategies, standards, and direction Stay abreast of emerging technologies The Minimum Qualifications Bachelors degree in Computer Science, Engineering or related Technical degree 8 years of related IT Solutions Architecture or Technical Lead experience The Ideal Qualifications 10 years of related IT Architecture or IT consulting experience P referred job experience includes some knowledge of Insurance and Wealth Management Experience with technology supporting: Financial Planning, Order Management, Lending, Wealth Investment Products, etc.
Excellent communication, presentation, influencing and reasoning skills A team-focused mentality with proven ability to work effectively with diverse stakeholders Experience in Capability mapping and business architecture concepts Strong interpersonal skills, with an emphasis on the ability to effectively influence others, collaborate and partner.
Understanding of the impact of IT on business results Demonstrated experience using Architecture Methodology (TOGAF, Archimate) Strong decision-making capabilities, with a proven ability to weigh the relative costs and benefits of potential actions and identify the most appropriate one Experience in Public Cloud platforms (preferably AWS), solution design and development using Cloud-native services, and understanding of cost rationalization.
AWS/Azure Cloud Certification Strong experience in Architecture and Design patterns Developed acumen in Domain Driven Design Strong experience with event streaming design and implementation using Kafka, along with web service protocols and patterns like SOAP, REST, JSON, XML/XSDs.
Experience with REST API for data interchange and API-driven systems integration decoupling digital and backend systems.
Track record of designing architectural reference material What to Expect as Part of MassMutual and the Team Regular meetings with the Enterprise Architecture team Focused one-on-one meetings with your manager Access to mentorship opportunities Networking opportunities including access to Asian, Hispanic/Latinx, African American, women, LGBTQ, veteran and disability-focused Business Resource Groups Access to learning content on Degreed and other informational platforms Your ethics and integrity will be valued by a company with a strong and stable ethical nosiness with industry leading pay and benefits LI-RK1 MassMutual is an equal employment opportunity employer.
We welcome all persons to apply.
If you need an accommodation to complete the application process, please contact us and share the specifics of the assistance you need.
California residents: For detailed information about your rights under the California Consumer Privacy Act (CCPA), please visit our California Consumer Privacy Act Disclosures page.
At HORST we offer a variety of benefits including but not limited to:
- Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program
Major Areas of Responsibility:
The setup and operation of CNC cylindrical grinders (e.g. Kellenberger, Studer, Jones & Shipman, Hauser, Clausing, etc.) Working from blueprints, operation sheets, travelers or other specifications, this person sets-up and completes the machining operations to produce high precision parts.Performs complex setups including fixturing, wheel selection, and dressing, for self and others. Operates equipment as needed. Creates CNC programs on the machine and edits programs as necessary. Selects grinding wheels, tooling, gages, and other equipment as needed. Assists other Operators with setup or production problems. Ensures that all manufactured parts are in full compliance with quality standards. Uses measuring instruments and gages to perform dimensional and visual inspections on close tolerance parts.Performs all routine maintenance on the equipment. Performs other related duties as required, including centerless grinding (in-feed and thru-feed) on equipment such as Cincinnati and Royal Master grinders. Packs and cleans parts as needed.Performs other machining and assembly operations as needed.Requirements:
High School diploma or equivalent. Technical school training a plus.Five plus years of increasingly diverse experience in a machine shop or CNC machining environmentAbility to set up CNC cylindrical grinders (e.g. Kellenberger, Studer, etc.)Experience with centerless grinding (Cincinnati, Royal Master, etc.), pinch-peel grinding (e.g. Rollomatic, ANCA, etc.) is a plus.Experience with manual cylindrical grinders (e.g. Brown & Sharpe, etc.) is a plus. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.Physical Requirements:
Ability to push/pull/carry up to 50 lbs.Able to stand for up to 8+ hoursPI12f15f9a85f4-26289-39677162
At HORST we offer a variety of benefits including but not limited to:
- Competitive PTO PackagePaid Company Holidays401K Match ProgramMedical, Dental, Vision BenefitsTuition Reimbursement/Assistance Program
Major Areas of Responsibility:
Set-up and operate Milling machines (Feeler, Robodrill, and Hass platforms)Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part.Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area.Performs complex set-ups of own work or for others.Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary.Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators.Ensures that all manufactured parts are in full compliance with quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary.Verifies and records actual part count, both prior to and upon completion of all workPerforms all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized. Returns excess bar stock or material to the staging area.Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies leadperson or supervisor of any parts shortages or machining problems/difficulties.Packs and washes/preserves parts as needed.Performs other machining and assembly operations as needed. Performs other related duties as required.Interacts with associates from all departments.Requirements:
- High School diploma or equivalent. Technical school training a plus.
- 3 years of set-up experience minimum required
- Experience with aerospace products and/or other close tolerance parts is a plus.
- Must be familiar with Fanuc controls.
- Must be able to set and change tools.
- Must be able to use standard gauges and inspection techniques.
- Experience with SPC, inspection documentation, and problem solving is a plus.
- Strong interpersonal and analytical skills.
- Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork.
- Must be able to read CNC programs.
- Five plus years of increasingly diverse experience in a machine shop or CNC machining environment
Physical Requirements:
- Ability to push/pull/carry up to 50 lbs.
- Able to stand for up to 8+ hours.
PIaf5bf2804d83-26289-39677110
Job ID: 521499
CRH's Americas Materials division is the leading integrated supplier of aggregates, asphalt, ready mixed concrete and paving and construction services in North America. Our operations span North America with over 29,000 employees at close to 1,660 locations in 45 US States and 2 Canadian provinces.
The Liquid Asphalt Manager will oversee the operations and logistics of the AMAT Northeast Division Liquid Asphalt Business. Primary responsibilities include coordinating the regional liquid asphalt supply chain, terminal management/oversight and supply/demand forecasting. This role is responsible for ensuring reliable, cost-effective delivery of liquid asphalt products from supply point to internal HMA plants while maintaining AMAT's high standards of quality, safety, and compliance. The position involves significant engagement & communication with internal liquid asphalt stakeholders, managing external vendors, coordinating internal forecasts, and optimizing logistics to support operational and commercial goals.
Key Responsibilities
- Manage the day-to-day operations and supply logistics for the company's liquid asphalt terminals (owned and leased), including receipt, storage, blending (as applicable), and dispatch of liquid asphalt products.
- Oversee and coordinate third-party truck haulers, including carrier selection, performance monitoring, contract compliance, cost control, and resolution of delivery issues to ensure timely and safe transportation.
- Manage relationships and supply agreements with additive supply companies (e.g., warm mix additives, antistrips, and other additives), including ordering, inventory tracking, delivery scheduling, and vendor performance evaluation to support product blending and quality requirements.
- Responsible for ensuring specification compliance for all products shipped from owned and third-party terminals, to include sampling, lab & testing coordination, and issue resolution with Agencies/DOT's and the internal HMA business. The NE Liquid Manager will work directly with the AMAT VP Liquid Asphalt to determine incoming supply quality requirements and the implementation of any blending or corrective actions required to ensure product quality and customer satisfaction.
- Collaborate internally with key individuals at AMAT operating companies, including sales teams, accounting groups, and HMA production stakeholders to develop accurate demand forecasts, supply plans , and inventory control and management strategies taking into consideration terminal capacity and working capital requirements.
- Monitor logistics costs, terminal performance metrics, and supply chain risks; identify opportunities for optimization, cost savings, and process improvements.
- Ensure all activities comply with safety regulations (OSHA, EPA, etc.), environmental standards, and company policies; promote a strong safety culture across terminals and haulers.
- Build and maintain strong relationships with terminal operators, vendors, haulers, and internal teams to support seamless operations. Engage and collaborate with other members of the AMAT Liquid Asphalt business to identify safety concerns and implement resolutions, problem solve and implement best practices in your area.
Required Skills and Qualifications
- Proven experience in logistics, supply chain management, or terminal operations, preferably in the asphalt, petroleum, liquid bulk, or related industries (e.g., fuel, chemicals, or aggregates).
- Strong relationship management skills with the ability to negotiate, influence, and maintain positive partnerships with third-party haulers, additive suppliers, terminal operators, and internal stakeholders.
- Entrepreneurial mindset coupled with a teamwork approach — engaged and communicative, proactive, resourceful, and capable of identifying opportunities, driving initiatives, and adapting to dynamic market conditions with a results-oriented approach.
- Ability to troubleshoot issues and understand maintenance needs. Strong knowledge of mechanical systems, including pumps, valves, heaters, pipelines, tanks, blending equipment, and related terminal infrastructure preferred
- Solid understanding of quality control processes, product specifications, and testing protocols for liquid asphalt or similar products.
- Excellent organizational, analytical, and problem-solving skills; proficiency in forecasting, inventory management, and cost analysis.
- Effective communication and leadership abilities to coordinate cross-functional teams and external partners.
- Willingness and ability to travel regionally (US & Canada) as needed to engage with internal stakeholders and facilities, terminals and vendor sites; flexibility for seasonal demands (e.g., extended hours during peak paving season). Occasional long-distance travel for internal meetings, industry conferences, etc.
- Bachelor's degree in supply chain, logistics, engineering, business, or a related field preferred; equivalent industry experience considered.
What CRH Offers You
- Highly competitive base pay
- Comprehensive medical, dental and disability benefits programs
- Group retirement savings program
- Health and wellness programs
- An inclusive culture that values opportunity for growth, development, and internal promotion
About CRH
CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization.
If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest!
CRH Americas Materials Inc. is an Affirmative Action and Equal Opportunity Employer.
EOE/Vet/Disability
CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.
We are looking for Business Process Consultant - Analytics Consulting with a good blend of business consulting skills and data analytics background.
Responsibilities:
The Process Consultant will be responsible for detailed current state analysis and data capture, working closely with underwriting teams and subject matter experts.
Leading current state process mapping of underwriter desktop and application usage through direct observation and structured discussions.
Documenting workflows, navigation paths, handoffs, and system interactions in a clear and consistent manner.
Coordinating and executing time and motion studies, including data collection and validation.
Reviewing existing standard work and operating procedure documentation to understand intended workflows and identify gaps versus actual practice.
Developing and maintaining core process artifacts, including SIPOC diagrams, value stream maps, and control frameworks.
Collaborating with subject matter experts to validate findings, confirm assumptions, and obtain formal signoff on documented processes and insights
Work on the latest applications of data science to solve business problems
Work directly with client stakeholders to translate business problems into high level analytics solution designs
Develop end-to-end solutions based on in-depth understanding of business problems to ensure analytics solutions are delivered efficiently, predictably, and sustainably.
Participate in discussions with team members to select and apply relevant analytic techniques and create actionable business insights
Responsible for making presentations to senior management, communicating results to business teams, and develop plans to help operationalize analytic solution
Requirements
Ability to engage with executive/VP-level stakeholders from client's team to translate business problems to high level analytics solution approach
Solid understanding of statistical and machine learning algorithms
Strong project management and team management skills and ability to work with global teams
Strong SQL skills and hands-on experience with analytic tools like R & Python & visualization tools like Qlik or Tableau
Exposure to cloud platforms and big data systems such as Hadoop, HDFS, Hive is a plus
Ability to work with IT and Data Engineering teams to help embed analytic outputs in business processes
Bachelor's in Business Analytics or equivalent work experience.
Technical Support Associate Analyst Duties: · Contributes to the IT Support job family in a support capacity.
Helps configure, install, maintain and upgrade computer systems hardware and software.
· Performs a broader set of tasks to provide operational support for the organization's information systems and peripheral equipment such as application servers, database servers, web servers, desktops, printers and storage devices.
· May assist in designing, developing, testing, debugging and implementing operating systems components, software tools, and utilities required for the operation, maintenance, and control of computer systems.
· Completes output (documents, analyses, and product) in specific work area to appropriate time and quality targets.
· Works under own initiative, prioritizes own work, and meets agreed timescales.
· Work is subject to frequent review by more experienced professionals in Technical Support.
Technical Support Associate Analyst – IT – Information Technology Job Requirements · At least 1 Year PC/LAN technical or equivalent experience preferred.
· Strong knowledge of the following is preferred.
· Microsoft operating systems and Microsoft Office.
· Apple hardware and operating systems.
· Networking switches and data networks.
· IP telecommunications systems.
· Audio Visual Systems.
· Capability to analyze problems and use sound judgement for determining solutions.
· Ability to clearly communicate with customers and other IT staff.
· Associate degree (PREFERRED) and/or equivalent work experience in the technology, hospitality, retail or customer focused field highly regarded.
· A+ certification (PREFERRED) or equivalent combination of education, training, and experience.
About Mindlance: Founded in 1999, Mindlance has been ranked as one of the fastest growing US Staffing firms by SIA for 9 consecutive years.
We provide workforce solutions to Global 1000 companies in Technology, Engineering, Finance, Clinical Research, Scientific, Digital/Creative/Marketing space.
Mindful of the opportunity gap, we provide balanced solutions for both employers and job seekers—elevating the standards of recruitment practice to a whole new level.
Our aim is to make a difference in the lives of job seekers by providing them with opportunities that broaden career horizons and expand skill sets.
We take pride in being a strong driver of mindfulness and balance at workplace.
EEO: “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.”
