Engineering Jobs in Long Beach Ca Remote

As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture.

The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers’ requirements.

The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards.

As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution.

The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program’s budget and schedule.

Essential Functions: Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.

Experience with RF systems, ideally GPS receivers Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.

Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.

Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.

Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.

Ability to provide project management reports as required, support senior level and customer reviews as necessary.

Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.

Ability to interface with the program’s leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.

Ability to participate or lead in the product development process including design reviews.

5 to 10% Travel required.

Must have Secret Security Clearance or be able to obtain a US security clearance.

Qualifications: Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas.

Viewed as an expert and/or resource within the field by peers in and outside the organization.

Bachelor’s Degree and a minimum of 9 years of prior relevant experience.

Graduate Degree and a minimum of 7 years of prior related experience.

In lieu of a degree, a minimum of 13 years of prior related experience.

Minimum of 5 years’ experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.

5 years’ experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.

6 years’ strong experience with receiver, Antenna, or Radio design (i.e.

RF).

4 years’ experience with embedded Hardware design.

2 years’ experience with FPGA design with emphasis in digital signal processing (DSP) 4 years’ experience demonstrating strong verbal and written skills 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS 2 Years’ experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim Must have Secret Security Clearance or be able to obtain a US security clearance.

Preferred Additional Skills: Strong familiarity with GPS Module design and topology.

Advanced with High-speed Analog design methodologies.

Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.

Familiar with FPGA design methodologies.

Proficient with DO-254 design.

In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $127,500.00
- $ 236,500.00 Max.

The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min
- $205,500.00 Max.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

LI-KM1 L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

• Seeking an experienced Associate Principal to lead and design scalable technical architectures with expertise in Architecture Patterns SOA and Microservices
• Design and develop comprehensive architectural diagrams to guide system development and integration Apply advanced Architecture Patterns and Styles to create scalable reliable and maintainable solutions.
• Lead the design and implementation of SOA and Microservicesbased architectures to support business agility
• Collaborate with cross-functional teams to align technical architectures with business goals and requirements
• Evaluate emerging technologies and recommend architectural improvements to enhance system performance and scalability
• Ensure adherence to architectural standards and best practices across projects.
• Mentor and guide technical teams on architecture principles and design methodologies

Roles and Responsibilities

• Drive the architectural strategy and vision for complex enterprise solutions within the Technical Architecture family
• Develop and maintain architectural frameworks and governance to ensure consistency across projects
• Conduct architectural reviews and provide expert guidance to development teams
• Facilitate communication between stakeholders, including business development and operations teams. Identify risks and propose mitigation strategies related to architectural decisions
• Lead innovation initiatives by exploring new architectural styles and patterns
• Provide leadership in troubleshooting and resolving complex architectural issues
• Support the professional growth of team members through coaching and knowledge sharing

Mandatory Skills :

• Architecture Patterns and Styles
• Microservices Architecture
• Architectural diagrams
• SOA and Microservices-Based Architecture
• Software Engineering and Design Architecture
• CI/CD Architecture
• Service-Oriented Architecture
• Architectural Patterns

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our shipping department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Warehouse Associate to join our Shipping Department team. As a Warehouse Associate, you will play a crucial role in ensuring the efficient and accurate processing of outgoing orders and shipments. Your attention to detail, strong organizational skills, and commitment to teamwork will contribute to the success of our shipping operations.

Key Responsibilities:

- Prepare and pack orders for shipment, ensuring accuracy and completeness of items.

- Utilize shipping software and equipment to generate shipping labels, packing slips, and other required documentation.

- Conduct quality checks on outgoing orders to ensure they meet company standards.

- Collaborate with other team members to prioritize orders and shipments based on deadlines and customer requirements.

- Operate forklifts and other warehouse equipment safely and efficiently.

- Maintain a clean and organized work area, following company guidelines for warehouse organization.

- Assist in receiving and inspecting incoming shipments when necessary.

- Communicate effectively with the team and supervisors, providing updates on order status and potential issues.

Qualifications:

- High school diploma or equivalent.

- Previous experience in a warehouse or shipping environment preferred, but not required.

- Forklift certification is a plus.

- Ability to lift and move packages (up to 50 pounds).

- Strong attention to detail and accuracy.

- Basic computer skills, including experience with shipping software.

- Excellent communication and teamwork skills.

- Willingness to learn and adapt to changing tasks and priorities.

- Ability to work in a fast-paced and physically demanding environment.

- Reliable and punctual with a strong work ethic.

We provide a comprehensive benefits package, including health insurance, a profit-sharing plan, paid time off, and more.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.

Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.

Qualifications:

Specialized knowledge

Collaboration – Establishes collaborative relationships to achieve objectives

Communication – Excellent interpersonal and communication (written and verbal) skills

Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment

Excellent attention to detail.

Project and general management experience

Experience in manufacturing line set-up

Self-motivated and multi-tasker; able to level load own workload.

Level 1 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.

Experience: 0-3 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®, AutoCAD.

Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.

Description: Entry-level position within job field.

Level 2 Qualifications:

Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering

Experience: 4-5 years.

Computer Skills: Proficient with Windows Operating System®, Office XP®., AutoCAD. Knowledge of design software

Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) “5S”. Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.

Description: Intermediate-Mid Level position within job field.

If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our inventory department for a Warehouse Associate.

• Pay rate: $18/hr
• Location: onsite in Carson, CA

Job Summary: We are seeking a reliable and dedicated Inventory Associate to join our Inventory Department team. You will play a crucial role in maintaining accurate inventory records, ensuring the availability of products, and optimizing inventory levels. This role requires strong analytical skills, attention to detail, and the ability to work collaboratively with various departments.

Key Responsibilities:

· Monitor and maintain inventory levels to ensure adequate stock availability

· Conduct regular inventory audits and reconcile discrepancies

· Coordinate with suppliers and vendors to manage incoming shipments and deliveries

· Implement and improve inventory management systems and processes

· Generate and analyze inventory reports to identify trends and areas for improvement

· Assist in the development and implementation of inventory control strategies

· Operate forklift and other warehouse equipment safely and efficiently

Qualifications:

· High school diploma or equivalent

· Previous experience in a warehouse or shipping environment preferred, but not required

· Forklift certification is a plus

· Ability to lift and move packages (up to 50 pounds)

· Strong attention to detail

· Basic computer skills, including experience with excel, inventory software or WMS, are a plus

· Excellent communication and teamwork skills

· Ability to work in a fast-paced and physically demanding environment

· Strong analytical and problem-solving skills

· Reliability and punctuality with a strong work ethic

· Excellent organizational and time management abilities

· Effective communication and interpersonal skills

· Ability to work independently and as part of a team

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Our client in Torrance is seeking an experienced Buyer III to support procurement activities for government programs. The role involves sourcing materials, negotiating with suppliers, issuing purchase orders, and ensuring compliance with government procurement regulations.

Because most work supports U.S. Government prime contracts, experience with DCMA CPSR (Contractor Purchasing System Review) processes is highly important. The buyer will be responsible for preparing CPSR-compliant PO folders and documentation prior to issuing purchase orders, including managing contract flow-down requirements to suppliers.

Key Responsibilities

• Source and purchase materials, components, and services
• Negotiate pricing, delivery, and supplier agreements
• Prepare CPSR-compliant PO documentation and approval folders
• Ensure government contract flow-down requirements are included in POs
• Track supplier performance, delivery schedules, and inventory needs
• Resolve supplier, delivery, and invoice issues
• Work with engineering, planning, production, and finance teams

Required Qualifications

• Bachelor’s degree or 8+ years of procurement/buying experience
• Experience with ERP systems (Oracle preferred)
• Strong Excel and Microsoft Office skills
• Knowledge of government procurement regulations (FAR, DFAR, ITAR)
• Experience with DCMA CPSR processes and PO justification requirements
• Strong negotiation, organization, and problem-solving skills
• Experience sourcing technical components such as machined parts, electronics, PCBA, cables, connectors, and hardware

ERP Manager (Microsoft Dynamics 365 Business Central)

Location: Torrance, CA (Hybrid work environment)

Employment Type: Full-time

Salary Range: $90,000 – $110,000 annually (commensurate with experience)

Work Authorization: Must be authorized to work in the U.S. without sponsorship.

Position Overview

We are seeking an experienced ERP Manager to lead ERP implementation initiatives while also supporting presales activities and business development efforts. This role combines project management, functional leadership, client-facing presales support, and strategic system planning. The ERP Manager will work closely with executive leadership, sales teams, offshore engineering teams, and clients to design ERP solutions that align with operational and financial objectives. This role also requires occasional travel to client sites to support implementation activities, user testing, and training.

Key Responsibilities

1. Project Leadership & Delivery

· Lead full-cycle ERP implementation projects from discovery to go-live and post-launch support

· Develop and manage project plans, budgets, and resource allocations

· Manage risks, scope, and client expectations

· Ensure on-time and on-budget project delivery

· Coordinate with offshore engineering teams to optimize task allocation and maintain development quality

2. Presales & Solution Consulting

· Participate in client discovery meetings and requirements workshops

· Provide solution design support during proposal development

· Prepare high-level solution architecture and implementation approaches

· Estimate project scope, timelines, and resource requirements

· Support RFP/RFI responses and client presentations

· Partner with Sales to help close ERP-related opportunities

3. Business & Functional Leadership

· Translate business requirements into functional ERP configurations

· Advise clients on best practices in Finance, Sales, Purchasing, and Inventory processes

· Identify opportunities for automation and operational efficiency

· Align ERP capabilities with financial reporting and management needs

4. Team & Executive review Management

· Supervise internal ERP consultants and coordinate with external vendors

· Work with global/HQ teams on cross-border ERP initiatives

· Collaborate with offshore engineers to ensure efficient delivery and consistent implementation quality

· Mentor junior consultants and build internal ERP capabilities

· Communicate effectively with executive leadership and department heads

5. Governance & Continuous Improvement

· Support user acceptance testing (UAT) and implementation readiness

· Provide client training and guidance to ensure successful system adoption

· Travel to client sites when needed to assist with testing, training, and implementation support

· Establish ERP governance and documentation standards

· Monitor system performance and recommend enhancements

· Drive adoption of Microsoft ecosystem tools (Power Platform, reporting tools, etc.)

Required Qualifications

· 5+ years of ERP implementation experience

· 2+ years of project leadership or PM experience

· Experience participating in presales or solution consulting activities

· Strong experience with Microsoft Dynamics 365 Business Central preferred

· Solid understanding of Finance, Accounting, Sales, Purchasing, and Inventory processes

· Experience preparing project estimates and implementation plans

· Experience collaborating with offshore or distributed engineering teams

· Willingness to travel to client sites for testing support and user training when needed

· Excellent client-facing communication skills

· Business-level Japanese proficiency (日常会話レベル以上)

· Must be authorized to work in the U.S. without sponsorship

· Must be available for hybrid work

Preferred Qualifications

· Experience in IT services or ERP consulting firms

· Experience supporting Japanese subsidiaries in the U.S.

· Familiarity with Microsoft Power Platform

· PMP certification or equivalent

· Experience in manufacturing or distribution environments

Number of Openings

DMF Lighting is a fast-growing leader in the lighting industry, always hard at work engineering what comes next. We have an exciting opportunity in our customer solutions department for a Technical Product Support Specialist.

• Pay range is $20-35/hr (based on skills/knowledge/experience)
• Location: onsite in Carson, CA

Job Description:

• Serve as the first point of contact for technical inquiries via phone, email, live chat, or a ticketing system.
• Troubleshoot and resolve basic product issues related to installation, configuration, and performance for products such as LED fixtures and lighting control systems.
• Provide pre- and post-sales technical support to sales teams and end-users.
• Document customer interactions, troubleshooting steps, and resolutions clearly and accurately within a ticketing system.
• Escalate complex or unresolved issues to engineering teams and track their progress until resolution.
• Maintain and update internal knowledge base articles and documentation for common issues and solutions.
• Identify errors or omissions in customer facing documentation and work with relevant departments to resolve or improve.
• Stay up-to-date with new product launches, technical specifications, and industry standards by participating in regular training sessions.
• Assist with other technical and product-related tasks as assigned, such as creating wiring diagrams or conducting customer training.
• Assist with onsite customer service visits if required.

Requirements:

• Education: Associate's degree or technical school certification in a related field (e.g., electronics, electrical technology) is preferred.
• Experience: 1+ years of experience in a customer-facing role, preferably in a technical support, customer service, or inside sales position.
• Technical knowledge: Basic understanding of electrical systems, LED lighting, and common troubleshooting techniques is highly desirable. Experience with lighting control systems (e.g., DMX, 0-10V, smart home controls) is a plus.
• Customer service skills: Proven ability to provide excellent service and maintain a positive, patient, and professional attitude, especially during stressful situations.
• Communication: Excellent written and verbal communication skills, with the ability to explain technical concepts to non-technical users.
• Problem-solving: Strong analytical and diagnostic skills with keen attention to detail.

Company Description

DMF Lighting designs and builds industry-leading LED downlighting that sets the standard for flexibility, performance, and quality. Founded over 30 years ago, DMF has grown into a leader in the lighting industry, driven by a passion for innovation and customer service.

Our in-house engineers constantly push the boundaries of lighting, delivering products that combine exceptional performance with beautiful design. At DMF, we believe in a collaborative, forward-thinking culture that empowers our team to bring creative ideas to life and make a lasting impact. If you’re looking for a company where creativity and innovation are part of the DNA, DMF is the place for you.

DMF Lighting is proud to be an Equal Opportunity Employer.

Under general supervision, deburr, weld prep and/or clean titanium and aluminum components and sub-assemblies to support all core processes, such as machining, welding, and NDE.

Essential Responsibilities

• 
  
• Support the highest standards of safety and environmental practices.
  
• Deburr machined components for sharp edges.
  
• Hand blend machined and welded surfaces to drawing requirements.
  
• Hand abrade components to desired finish for weld.
  
• Clean components and assemblies per drawing and/or manufacturing work instructions.
  
• Make a continuous effort to improve operations, decrease turnaround times, streamline work processes, and work cooperatively.
  
• Perform other related duties, as assigned, for the purpose of ensuring an efficient and effective work environment.
  
• Check work after completion of each operation in job and/or completed job to ensure it is complete per drawing and/or manufacturing work instruction.
  

$23-$26 per hour

• High school diploma or General Education Degree (GED).
• Aerospace manufacturing experience preferred.

This position is currently accepting applications.

Apply Now

Late Shift Machinist - Full Time - Santa Fe Springs, CA

At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the future. Join our story and create your own impact by developing your expertise and building solutions that help make our lives safer, smarter and more sustainable.

Join our Pump Services team within Rotating Equipment Services division in Santa Fe Springs, CA as a Late Shift Machinist and help us take our Service Center to the next level.

In this role you will be accountable for:

* Performing layouts, setting up and operating conventional machine tools as required

* Reading and interpreting all drawings, including geometric dimensioning and tolerancing

* Designing setup methods where none exist

* Instructing other shop personnel on proper machining techniques

* Continually improving methods to deliver higher quality with improved costs

To succeed in this role, you will need:

* Completion of a machinist apprentice program or equivalent training

* Ability to hold close tolerances and conduct component inspections

* Ability to setup machine tools: ID / OD Grinders, Turret Lathe, Engine Lathe, Horizontal Boring Mill, Vertical Boring Mill, Radial Drill, Planer Mill

* Four years of experience in machine shop operations

* Willingness to work in a team environment

* Openness to working overtime as required

If you're a qualified candidate with proven expertise in developing core competencies, leading teams and driving continuous improvement, take the next step and apply with Sulzer. Make the most of your career!

Your benefits:

* 15 days of paid time off and 11 company-paid holidays

* 401k plan with a 6% match

* Comprehensive health plan including medical, dental, vision, Life, short-term & long-term disability

* Motivating wellness program

* Employee Assistance Program

Location: We are based in Santa Fe Springs, CA.

We are looking forward to hearing from you!

Sulzer is an equal opportunity employer, committed to the strength of a diverse workforce.

82% of our employees recommend Sulzer as a good place to work - so come and join our story, starting today!

Lead complex construction projects from concept to completion, ensuring timelines, budgets, and quality standards are met. Collaborate with cross-functional teams and contractors to drive results and deliver exceptional builds. If you're a proactive leader with a passion for construction excellence, we want to hear from you.

Company Benefits:

• 13 paid holidays
• Vacation and sick pay
• PPE provided along with annual allowance for boots and prescription safety glasses
• Work shirts provided by company
• Annual appreciation package
• Early performance evaluation opportunities
• Competitive benefits (medical/dental/vision)
• 401k + match
• Company paid life insurance and disability
• Employee assistance program
• Career development opportunities

Responsibilities:

• Planning, organizing, directing, controlling, and evaluating construction projects (HVAC/Refrigeration & Mechanical projects) from start to finish according to schedule, specifications, and budget.
• Preparing and submitting construction project budget estimates, critical path schedules, and quality control programs.
• Planning and preparing construction schedules and milestones, and monitoring progress against established schedules.
• Preparing contracts and negotiating revisions, changes, and additions to contractual agreements with architects, consultants, clients, suppliers, and subcontractors.
• Planning, coordinating, and managing effectively all Foremen, material, and equipment to meet the established budget, schedule, and scope of the projects.
• Preparing progress reports and issuing reports to clients as necessary.

Qualifications:

• Must be able to develop and maintain detailed MS Project schedules (startup-task durations, resource allocations, labor costs, etc.).
• Must be able to maintain multiple complex projects in all varying phases of construction at the same time.
• 2-5 years in industrial piping or Ammonia Refrigeration as a Project Manager.
• Successfully completed multiple large-scale industrial Piping and Ammonia Refrigeration projects for reputable contractors.
• Coaching, mentoring, and teaching project teams.
• Advanced financial management and forecasting experience.
• Excellent oral and written communication skills; must be detail-oriented, self-sufficient, and self-motivated.
• Exceptional planning and organizing skills with the ability to manage a number of projects

Company Profile:

CIMCO specializes in the engineering, design, manufacture, installation and service of complex thermal building solutions for industrial, process cooling and recreational refrigeration and mechanical systems. For more than 100 years, CIMCO's leadership and unparalleled research, development and manufacturing programs has put us at the forefront of industry advancements and technological breakthroughs. Our professional engineers, technicians and designers apply innovative state-of-the-art equipment and refrigerants to develop systems that meet even the most complex thermal challenges.

CIMCO is committed to creating an inclusive environment where people from all backgrounds can thrive. Together, we embrace diversity of thought, experience, and perspective, as we combine our unique skills and capabilities to drive successful outcomes for all stakeholders. As an equal opportunity employer, CIMCO provides accessibility accommodations during the recruitment process. Should you require any accommodation, please let us know and we will work with you to meet your needs.