Engineering Jobs in In Remote

At Tata Technologies we make product development dreams a reality by designing, engineering, and validating the products of tomorrow for the world’s leading manufacturers. Due to our continued growth, we are now recruiting for a Test Cell Support to strengthen our team in Columbus, IN.

Job Title- Test Cell Support

Location- Columbus, IN.

DESCRIPTION

The Engine Tuning Engineer is responsible for calibrating, optimizing, and validating diesel engine and aftertreatment control strategies to meet performance, fuel economy, emissions, and drivability targets. The role demands strong hands-on test cell experience and proactive troubleshooting of engine, aftertreatment, and test system issues throughout development and validation programs.

RESPONSIBILITIES

To be successful in this role you will need the following:

• Lead calibration and tuning of diesel engine parameters including fuel injection timing and quantity, rail pressure, combustion phasing, air-path, EGR, boost control, and thermal management.
• Support aftertreatment calibration (DOC, DPF, SCR) with primary ownership on engine-out emissions.
• Plan and execute engine-centric test cell activities for calibration, tuning, and validation.
• Support Controls Engineer and Test Cell Technician to instrument engines and combustion measurement systems (pressure transducers, air/fuel flow, emissions).
• Troubleshoot engine performance, combustion, smoke, fuel consumption, and engine-out emissions issues.
• Diagnose control logic, calibration, and engine hardware issues observed during test cell operation.
• Use test cell data and Simulink model behavior to perform structured root cause analysis.
• Implement and validate corrective actions in control models and calibration datasets.
• Execute steady-state, transient, combustion, and regulatory test cycles.
• Strong understanding of Engine Controls in Simulink Models.

Experience:

• Strong expertise in diesel engine calibration and combustion fundamentals.
• Strong experience executing and supporting engine test cell activities, including steady-state, transient, combustion, and emissions testing.
• Hands-on engine test cell experience.
• Hands-on experience developing control system models in Simulink (must-have).
• Strong proficiency in MATLAB for engine and test data analysis (must-have).
• Proven troubleshooting capability across engine, controls, and calibration.
• Experience with calibration tools (ETAS INCA, ATI Vision, Vector CANape).
• Familiarity with engine test systems and DAQ

Qualifications & Education:

1. Master’s degree (preferred) in Internal Combustion Engines, Automotive Engineering, Controls Engineering, or Powertrain Systems.
2. 5–8 years of relevant experience in diesel engine calibration, tuning, and validation within engine test cell environments.

If you are passionate about bringing innovation to the projects, you work on then we would love to hear from you. We offer a complete benefits package, including; medical, dental, vision, life insurance and 401K.

Tata Technologies Inc. is an Equal Opportunity/ Affirmative Action employer. We provide equal employment opportunities to all qualified employees and applicants for employment without regard to race, religion, sex, age, marital status, national origin, sexual orientation, citizenship status, veteran status, disability, or any other legally protected status. We prohibit discrimination in decisions concerning recruitment, hiring, compensation, benefits, training, termination, promotions, or any other condition of employment or career development.

Tata Technologies: Engineering a better world.

Tata Technologies would like to thank all applicants for their interest, each application will be reviewed against the set criteria for the role. We would like to advise that only candidates under consideration will be contacted. If you do not hear from us within 10 working days following the closing date it will mean that unfortunately your application has not been successful. We will however retain your details for any suitable future opportunities.

Position Summary:

The Business Analyst will provide cost expertise for the xEV Business Unit (BU) to support the achievement of optimal cost targets. This role involves researching current cost drivers and setting targets across the value chain for equipment, materials, and manufacturing. Additionally, the Business Analyst will support market research and pursuit plans to optimize the Astemos manufacturing capabilities.

Minimum Qualifications (Education, Experience, and Skills):

• Bachelor/master’s degree in engineering, finance, operations, or data analytics
• At least 3 years of experience in the manufacturing sector

Preferred Qualifications (Education, Experience, and Skills):

• 1 year of experience in cost analysis
• 3 years of Experience in Manufacturing

Position Duties and Responsibilities

• Based on customer requests for new business or to improve current business, provide optimal cost analysis for manufacturing 50%
• Support business needs by utilizing market intelligence and internal capabilities to support acquiring new business 15%
• Maintain an internal database with latest manufacturing cost including raw material, labor etc. 10%
• Co-lead the VEC activities with BU purchasing team from preparing parts to scheduling with suppliers 10%
• Other duties upon request 10%
• Create and update templates for benchmarking 5%

Skills and Abilities:

• Corporate P&L familiarity
• Microsoft Office proficiency
• Ability to work cross-functionally and globally.
• Collaboration across remote sites
• High accountability
• Project management
• Analytical & problem solving
• Communication & presentation

Supervisory Responsibilities:

• None

Software:

• Microsoft Office Suite
• SAP

Essential to Job Functions – Physical and/or Mental Restrictions:

• Ability to work for extended periods of time while sitting
• Standing, walking, and bending for the duration of the workday
• Ability to lift and/or move up to twenty-five pounds
• Visual ability to work accurately with detailed information and a computer screen

Work Environment – Travel, Noise, Smells, Quiet, Indoors or Outdoors, etc.

• May require up to 20% travel
• Open office setting
• Factory setting with noise
• Night meetings with global partners

Technical Source is currently in search of a Validation Engineer for a pharmaceutical manufacturing client in the Greater Indianapolis Area. This is a long-term contract position that requires on-site work. The qualified candidate should have experience conducting the Commissioning, Qualification, and Validation of HVAC and Utilities Systems in a Pharmaceutical Environment.

Responsibilities of the Validation Engineer include:

• Develop/Execute Protocols for HVAC/Utilities
• Conduct Temperature Mapping
• Assist with Validating Building Automation Systems (Hardware)
• Utilize Paperless Validation Software
• Complete Required Documentation

Qualifications of the Validation Engineer include:

• Bachelor's Degree in Engineering or Related Field
• 3+ Years of Validation Experience
• Experience with cGMP documentation and the entire Validation Life Cycle
• Knowledge of KNEAT

*No C2C or Sponsorship is available at this time*

*Compensation will scale based on experience and fit*

JOB TITLE: Injection Molding Process Technician

LOCATION: Shelbyville, IN

INDUSTRY: Injection Molding

JOB DESCRIPTION:

The Injection Molding Process Technician works within a small team of process technicians and mold setters to support production by performing tool changes, startups, and process adjustments on large-tonnage injection molding machines. This role is responsible for maintaining quality standards, optimizing cycle times, and supporting auxiliary equipment and automation systems.

RESPONSIBILITIES:

• Perform mold changes on Engel and Krauss Maffei injection molding machines ranging from 770 to 3500 tons.
• Start up injection molding machines using established processes.
• Adjust machine parameters to meet quality, performance, and cycle time standards.
• Set up and start robots using existing programs; perform simple robot program changes as required.
• Perform startup and in-process quality checks.
• Troubleshoot molding, automation, and auxiliary equipment issues to maintain production stability and quality standards.

REQUIREMENTS:

• Experience working in injection molding as a Process Technician.
• Experience with linear robots.
• Strong English communication skills (verbal and written).
• RJG or Similar Training

ABOUT THEORIS:

Our goal is to Fuel Your Career! As a Theoris team member, you join a culture based on people-centered values and an environment that fosters both personal and professional growth. We build long-term relationships with our clients and our consultants. With over 30 years of building strong relationships in the industry, we’re uniquely positioned to make the right connections. This knowledge is used to find the right job placement. Our recruiting teams are experts dedicated to the information technology and engineering staffing space and are highly respected by our client base.

Automotive Plastics Engineer – Vehicle Engineering Focus

General Purpose:

We are seeking an Automotive Plastics Engineer with strong vehicle engineering experience to design and develop Class A and B plastic components for automotive applications. The ideal candidate understands vehicle integration, manufacturing constraints (injection molding, vacuum forming), and delivers reliable, production-ready designs.

Key Responsibilities:

• Design and develop vehicle components and conversions in CAD, specializing in Class A surfaces and B-side structural features.
• Ensure designs meet vehicle integration, durability, cost, and quality targets.
• Apply knowledge of injection molding, vacuum forming, and related tooling.
• Support projects through concept, design, validation, and production launch (APQP/Stage Gate).
• Collaborate with Manufacturing, Quality, and other teams to ensure design feasibility and assembly readiness.
• Develop detailed drawings, GD&T, tolerance stack-ups, and perform FEA/DFA as needed.
• Support prototype builds and vehicle validation activities.
• Recommend cost-effective design improvements and standardization opportunities.

Required Skills & Qualifications:

• Bachelor’s Degree in Engineering.
• 5+ years of automotive vehicle engineering experience, including Class A surface design.
• Strong understanding of vehicle systems integration and reliable design practices.
• Experience with injection molding, vacuum forming, tooling, and multi-piece assemblies.
• Knowledge of GD&T, D/PFMEA, DVP&R, DOE, 8D, tolerance stack-up, and dimensional management.
• Experience with steel, aluminum, and plastic material selection.
• Proficient in CAD (Inventor/AutoCAD preferred) and standard engineering tools.
• Assembly plant launch experience preferred.

LHH is seeking a Senior Design Engineer for a Direct Hire, Permanent Placement position with a manufacturing client in Indianapolis, Indiana. This is a unique opportunity to join an organization with a 100+ year history and has doubled in size in recent years. In this role, you will design and develop new, in-demand products, modify and improve existing designs, and manage key projects. The compensation is commensurate to experience and will range between $85,000-95,000 per year plus bonus and includes affordable medical insurance options, Paid Time Off, and a 401K plan with a company match.

***Must be authorized to work in the U.S. without employer sponsorship.***

JOB RESPONSIBILITIES

• Lead new projects from beginning to end including the definition of the concept, designing, BOM selection, and manufacturing
• Design new products and modify existing products using CAD
• Create detailed drawings to match customer specs, material thickness, structural integrity, etc.
• Work closely with the engineering team, technicians, and production staff on the manufacturing floor who will put your vision and schematics into action
• Verify and validate new designs and conduct root cause analysis of quality issues during the design and beginning stages of the manufacturing process
• Collaborate with the sales and client services teams about client requests, custom projects, etc.
• Perform initial and ongoing product and performance reviews

QUALIFICATIONS

• Bachelor’s Degree in Engineering is highly preferred (with preference toward Mechanical Design)
• A minimum of 5+ years of product design experience using CAD is required
• Must have 2+ years of design experience specifically using SolidWorks 3D
• Must have experience with BOM, creating work instructions, and possess the ability to read blueprints
• Must possess strong analytical, trouble-shooting, and problem-solving skills
• Must possess strong communication skills including the ability to effectively work as part of a cross-functional team
• ***Must be authorized to work in the U.S. without employer sponsorship.***

If you or someone in your network fit this profile and would like to apply for this Senior Design Engineer position in Indianapolis, Indiana, please submit your application alongside your resume using the link in this posting.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

#LHH / #JobOpening / #HiringNow / #NowHiring / #Hiring / #WorkWithUs / #JobAlert / #JobSearch / #CareerOpportunity / #HotJobs / #JoinOurTeam / #JobSeekers / #CareerGoals / #JobHunt / #JobVacancy / #MechanicalDesign / #3DModeling / #DesignEngineering / #DesignEngineer / #MechanicalEngineer / #CADEngineer / #CADDesigner / #SolidWorks / #AutoCAD / #Creo / #Catia / #EngineeringJobs / #ManufacturingJobs / #IndustrialEngineering / #EngineeringCareers / #IndianaJobs / #MidwestJobs / #USJobs

Job Title : Nuclear Engineer (Naval Reactors Engineer) Category / Component : Officer • Active Overview Design, regulate, and oversee the Navy's nuclear propulsion program, including reactor design, fleet operations, and eventual defueling and decommissioning of nuclear powered ships and submarines from Naval Reactors Headquarters and associated Department of Energy laboratories and shipyards.

Key Responsibilities Provide technical direction in areas such as reactor and fluid systems design, reactor physics, materials development, component design for steam generators, pumps, and valves, instrumentation and control for reactor and propulsion plants, testing and quality control, radiation shielding, and chemistry and radiological controls; review designs and analyses from laboratories, shipyards, and industry partners; coordinate with fleet units to ensure safe and reliable nuclear plant operation.

What to Expect Assume significant technical responsibility early in your career as part of a lean headquarters staff; work primarily in an analytical and oversight role rather than operating plants at sea; balance long term engineering projects with time sensitive fleet and shipyard issues; frequent coordination with senior civilian engineers, naval officers, and technical teams; high expectations for attention to detail, judgment, and written and oral communication.

Work Environment Work mainly at Naval Reactors Headquarters in the Washington, District of Columbia area with regular engagement with Department of Energy laboratories, nuclear training sites, shipyards, and nuclear powered ships and submarines; office based work that includes document reviews, technical meetings, inspections, and site visits rather than day to day shipboard watchstanding.

Pathways, Training & Advancement Officer commissioning through programs such as Officer Candidate School or the Nuclear Propulsion Officer Candidate program followed by a structured technical qualification program at Naval Reactors; rotational exposure to laboratories, prototypes, shipyards, and fleet support issues; progressive responsibility leading projects and becoming a subject matter expert, with opportunities for professional military education and advanced graduate study in technical fields.

Entry through the Nuclear Propulsion Officer Candidate program for qualified college students and recent graduates, or selection via Officer Candidate School for those who already hold qualifying degrees; all applicants must meet Nuclear Propulsion Program academic and technical screening standards in addition to general officer commissioning requirements.

Qualifications All Navy jobs require meeting general enlistment or commissioning standards, which typically include: Eligibility to serve in the United States Navy, which may involve United States citizenship or other legal residency and work status, depending on the program and current law and policy A high school diploma or equivalent for enlisted positions, and a bachelor's or qualifying professional degree for officer positions Meeting age limits that vary by program and are set in law and Navy policy.

Some communities have more restrictive age ranges Meeting medical, vision, and dental standards, including body composition and physical fitness requirements, with some jobs requiring more demanding standards Meeting character and conduct standards, including background screening Achieving required test scores for your program, such as the Armed Services Vocational Aptitude Battery for enlisted roles or officer qualification tests for officer programs Eligibility for a security clearance when required for your rating or designator Additional qualifications can include specific skills, education, licensure, or experience that are unique to a job or community and will be reviewed with you by a recruiter.

Additional qualifications for this job may include: Completion of a rigorous technical degree in engineering, physics, mathematics, or a closely related field that includes strong backgrounds in calculus and physics; outstanding academic record, particularly in technical coursework; United States citizenship and eligibility for a high level security clearance; strong technical aptitude and comfort with detailed analytical work.

Education Education benefits are available through standard Navy programs such as Tuition Assistance, the Post-9/11 GI Bill, ACE-recommended college credit for Navy training, Navy COOL-funded certifications, USMAP apprenticeships, and other Navy College Program opportunities.

Specific options depend on the Sailor's status, training, and current Navy policy.

Pay, Benefits & Service Pay, benefits, and service commitments follow standard Navy Active and/or Reserve policies for this type of role, including basic pay, allowances when eligible, health coverage, and retirement options.

Exact entitlements, special pays, and service obligations depend on program, component, years of service, and current law and Navy guidance.

Incentives Incentives such as bonuses, special pays, and loan repayment may be available at times for specific ratings or communities, but they change frequently and cannot be guaranteed.

Applicants must confirm current incentives and eligibility with an official Navy recruiter or authoritative Navy source.

Notes and Disclaimers This description is a general overview of typical duties, training, and opportunities in this community.

It does not replace official Navy instructions, policies, or contracts and does not guarantee specific assignments, training, incentives, or outcomes.

Actual opportunities depend on Navy needs, individual performance, screening results, and current law and policy.

Job Title: Robot Programmer / Technician – Fanuc

Location: Warsaw, IN

Role Overview

We are seeking Robot Programmers/Technicians with hands-on Fanuc robotics experience to support integration and commissioning efforts for a high-volume automotive manufacturer in Northern Indiana.

This role requires strong hands-on experience with Fanuc robotics, body shop applications, and special means build. The selected candidates will support programming, touch-ups, commissioning, and quality collaboration during pre-commissioning and launch phases.

This is a high-impact, floor-support role in an active manufacturing and commissioning environment.

Mandatory Skills

• 2–5 years of experience with robot setup, troubleshooting, and/or programming
• Experience with Fanuc robotics (SpotTool+ & V9.40 for R30iB Plus controller preferred)
• Certification-only Fanuc experience is acceptable
• Must be willing to work onsite in Warsaw, IN – 6 days/week, 12-hour shifts

Key Responsibilities

Programming & Optimization

• Develop, modify, and optimize Fanuc robot programs for body shop applications
• Configure robot frames, tools, payloads, and TCPs
• Support rapid program adjustments during special means builds

Commissioning & Startup Support

• Perform robot teaching, touch-ups, and recovery in production and pre-commissioning environments
• Support robot cell startup and offline system work
• Assist in commissioning activities under tight timelines

Troubleshooting & Floor Support

• Troubleshoot robot alarms, motion issues, and sequence ladder logic
• Coordinate with Controls teams to validate I/O, interlocks, and handshaking
• Provide on-floor programming support during peak production periods

Quality & Collaboration

• Work closely with Quality teams to improve weld quality, part accuracy, and repeatability
• Support containment actions and fast-turn engineering changes
• Follow all safety procedures in active manufacturing environments

Required Qualifications

• 2–5 years of industrial robotics experience
• Strong hands-on Fanuc programming and troubleshooting
• Experience in automotive body shop environments preferred
• Ability to work extended shifts in a fast-paced manufacturing setting
• Strong problem-solving and teamwork skills

Position Overview

We are seeking an experienced CNC Process Engineer to lead the standardization and optimization of CNC machining operations across multiple identical vertical machining cells. This role focuses on converting subject-matter expertise into structured, repeatable shop-floor documentation while serving as the advanced technical escalation point for complex machining issues.

The ideal candidate will drive continuous improvement initiatives targeting cycle time reduction, tool life optimization, chip evacuation, and tooling strategies, working closely with tooling vendors to develop custom solutions.

Key Responsibilities

• Capture tribal knowledge from CNC SMEs and convert it into standardized documentation.
• Create and maintain Standard Operating Procedures (SOPs) and Operator-Driven Reliability (ODR) tasks.
• Develop troubleshooting guides and decision trees for rapid issue resolution.
• Standardize processes across identical machine cells while identifying and documenting exceptions.
• Establish escalation tiers and structured support models for operators, skilled trades, and CNC engineers.
• Perform advanced CNC troubleshooting and root cause analysis.
• Improve process reliability, repeatability, and equipment uptime.
• Lead continuous improvement initiatives focused on:
• Cycle time reduction
• Process stability
• Tool life optimization
• Optimize tooling strategies including:
• Tool selection
• Feeds and speeds
• Tool life management
• Collaborate with tooling vendors to design and implement custom tooling solutions.
• Address chip evacuation and high-volume machining challenges.
• Develop training materials and provide hands-on training to operators, skilled trades, and engineering staff.

Required Qualifications

• 5+ years of CNC machining or CNC Process Engineering experience.
• Strong technical documentation and writing skills.
• Proven experience in troubleshooting, root cause analysis, and continuous improvement.
• Hands-on experience working directly on the manufacturing floor.

Preferred Qualifications

• Experience with Haas NGC control systems.
• Knowledge of Haas Advanced Tool Management (ATM).
• Strong understanding of:
• Global macro variables
• Mathematical operators
• Logical functions in CNC programming
• Experienced CAM programmer.
• Strong G-code programming background.
• Familiarity with Midaco (or similar) pallet change systems.
• Extensive tooling selection and application knowledge.
• Experience with:
• High-volume machining
• Automated fixturing
• Pallet systems
• Robot automation in CNC environments

Work Environment

• Fully onsite in Middlebury, Indiana.
• Hands-on role on the manufacturing floor.
• Collaboration with cross-functional teams and tooling vendors.
• Daily per diem provided.

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Night shift Maintenance Technician

Compensation: $86,000+ in 1st year plus additional OT available!

Automatic increases: Earn over $92,000+ in 2nd year plus additional OT!

Hours: 4:45 pm – 5:00 am

Days of the week: Swing shift (2, 2, 3 model) – 36 hours one week, 49 hours next week – off every other Friday, Saturday and Sunday. Work 14 days a month!!!

Check out the Bremen Campus:

And Experience Requirements

• High school graduate or equivalent required (2-yr Technical Degree preferred)
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Maintenance Technician Job Description

• Support manufacturing operations by providing a full range of multi-craft equipment maintenance with focus on reliability and maintainability.
• Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery.

Key Responsibilities

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Install and perform alignment on mechanical drive systems.
• Complete all assigned preventive tasks including major service and overhaul.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to determine establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.