Engineering Jobs in Fullerton, CA
84 positions found — Page 3
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Specialist, Electrical Engineer
Job Number: 34255
Job Location: Yorba Linda, California, On Site
Job Schedule: 4/10
Clearance: Must Have the Ability to Obtain and Maintain a Department of War Security Clearance
Job Description:
L3Harris is seeking a Electrical Engineer with knowledge of job area in Analog, Digital, or RF engineering. Participate in complex projects or processes with general oversight. Communicates within and outside of own function to gain cooperation on operational processes, practices, and procedures. Makes moderate to substantial improvements to systems and processes. Contributes to achievement of departmental goals and operating plans with direct impact on the departmental results.
Essential Functions:
- Responsible for designing, developing, modifying, testing, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems.
- Determines design approaches and parameters.
- Analyzes electrical requirements to determine feasibility of design within time and cost constraints.
- Analyzes equipment to establish operating data, conducts experimental tests and evaluates results.
- Selects components and equipment based on analysis of specifications and reliability.
- Able to identify component operational characteristics that may impact system performance and or sustainability.
- Supports and/or leads various design activities for new/existing products, predominantly involving medium frequencies/edge rates. Design for manufacturing is considered through all phases of the development process.
- Applies moderately complex electrical engineering principles and techniques to support/lead design, development, documentation, verification, and manufacturing debug activities.
- Supports and/or leads design modifications for existing products frequently driven by component obsolescence situations. The design modification is usually of moderate complexity and may require major card level redesign to absorb the necessary hardware changes.
- Provides technical solutions to a wide range of difficult problems. Contributes to completion of milestones associated with specific projects that have significant effect on the success of a sub-process/small project task.
- Ability to understand and generate schematics with digital and analog electronic circuits.
- Ability to provide guidance for PCB layout.
- May also review vendor capability to support development. Includes the application of specialized skill sets including analog, digital, FPGA, DSP, CCA, power, antenna, and control systems knowledge as required.
- May develop, design, and assess the methodologies and performance of specialized algorithms for, Underwater Acoustics, sonar, communications, geophysical, and other sensor processing applications.
- Generation of Presentation materials and training
- Operation's Manual development and release
- Test Procedure development and release
- 5 to 10% Travel required.
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications:
- Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience.
- Minimum 3 years of experience in Analog Circuit Design.
- Minimum 3 years of RF Electronics.
- Minimum 2 years of Schematics Capturing & PCBA Layout in either Altium or Cadence.
- Minimum 3 years Lab experience in trouble shooting electronics in Analog and RF domain.
- Minimum 2 years of experience working with Network Analyzer, Frequency Generator, Vector Analyzer, and digital/analog scope.
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills:
- Familiarity with GPS Electronics / Circuit Design.
- A/D and D/A Circuit Design, Interfacing and use experience
- Familiarity with industry standard EDA tools including schematic capture, PCB layout and FPGA development/simulation.
- Experience in development of military products, a plus.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $92,500.00 - $171,500.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $80,500.00 Min - $149,500.00 Max. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
#LI-KM1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Senior Specialist, Electrical Engineer
Job Number: 34238
Job Location: Yorba Linda, California, On Site
Job Schedule: 4/10
Clearance: Must Have the Ability to Obtain and Maintain a Department of War Security Clearance
Job Description:
As a Senior Specialist Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture. The Senior Specialist EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customer's requirements. The Senior Specialist EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards. As a Senior Specialist EE, the candidate is expected to understand each aspect of the technology used in the proposed solution. The assigned EE also must work with the cost account manager, program management, and project management to develop the solution within the program's budget and schedule.
Essential Functions:
- Requires solid level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.
- Experience with RF systems, ideally GPS receivers
- Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
- Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
- Ability to support cross functional teams for cross functional design conflict resolution, Root Cause Analysis, blank page architecture developments and design
- Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
- Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
- Ability to provide project management reports as required, support senior level and customer reviews as necessary.
- Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
- Ability to interface with the program's leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
- Ability to participate or lead in the product development process including design reviews.
- 5 to 10% Travel required.
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications:
- Bachelor's Degree and a minimum of 6 years of prior relevant experience.
- Graduate Degree and a minimum of 4 years of prior related experience.
- In lieu of a degree, minimum of 10 years of prior related experience.
- 3 years' experience with receiver, Antenna, or Radio design.
- Minimum 4 years' hands-on experience working on RF circuitry in Lab.
- 1 years' experience with embedded Hardware design.
- 1 years' experience with FPGA design with emphasis in digital signal processing (DSP)
- 4 years' experience demonstrating strong verbal and written skills
- Experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium,and Ansys HFSS
- Experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim
- Minimum 4 years Lab experience in trouble shooting electronics in Analog and RF domain.
- Minimum 3 years of experience working with Network Analyzer, Frequency Generator, Vector Analyzer, and digital/analog scope.
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills:
- Ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
- Proficient in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
- Proficient with FPGA design methodologies.
- Proficient with High speed Analog design methodologies.
- Proficient with DO-254 design.
- Strong verbal and written communication skills.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $106,500.00 - $197,500.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $92,500.00 Min - $171,500.00 Max. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
#LI-KM1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Arrowhead Talent Solutions is helping a growing aerospace and aviation manufacturing company find a Manufacturing Operations Supervisor in Fullerton, CA.
**Must be a US Citizen**
**Must have experience with CNC Machines**
- Lead first-shift manufacturing operations for a large production team, ensuring safety, productivity, and on-time delivery.
- Manage daily production activities including scheduling, staffing, training, and performance management.
- Drive operational efficiency through process improvements, cross-functional problem solving, and 5S initiatives.
- Partner with engineering, quality, and maintenance to resolve production issues and improve product quality.
- Conduct performance reviews and support hiring, development, and retention of team members.
Qualifications
- 6+ years of manufacturing leadership experience (aerospace or automotive preferred).
- Strong knowledge of CNC machining environments, tooling, and manufacturing processes.
- Ability to read and interpret blueprints and technical documentation.
Here, we craft excellence together. Your mission? Making the journey the most enjoyable part of the trip.
Join our first-class team to reinvent in-flight experience. In the role of Planning Supervisor, you'll play a pivotal part on our production team.
The Aftermarket Planning Supervisor will lead and manage a team of spares planners within the aftermarket division of a global aerospace manufacturing company. This role is dedicated to ensuring operational excellence in aftermarket planning, scheduling, and inventory management. With a strong focus on aerospace spares support, the Supervisor will oversee queue management, KPI performance, and daily planning execution to meet customer requirements. The position plays a key role in ensuring the accuracy of data in the business system, which directly impacts company-wide financial reporting and aftermarket customer satisfaction.
• Lead, mentor, and supervise a team of spares planners in the aerospace aftermarket division, ensuring high performance, accountability, and alignment with organizational goals.
• Implement and maintain world-class strategies for aftermarket planning, scheduling, inventory, and customer satisfaction, while driving continuous improvement across all functions.
• Oversee all aftermarket planning activities, including workload balance, prioritization, and queue management for PPO, initial commitment dates and recovery dates, ensuring accuracy, timeliness, and ownership of all lines.
• Drive daily execution of key aftermarket KPIs including PPO release adherence, initial commitment dates and recovery date creation, and PMO release compliance. Monitor individual performance, flex resources to balance changing workloads, and lead cross-functional efforts to resolve the highest aging lines.
• Act as the first line of escalation for planning and operational issues, providing rapid problem-solving support to both the team and internal stakeholders.
• Maintain and update weekly KPI charts for Tuesday management reports, providing analysis and insights while the Manager presents. Transition ownership of additional metrics (supply cancellations, pull-ins, pushouts, NCR, etc.) from Manager to Supervisor over time.
• Develop and monitor aftermarket production plans, budgets, and schedules in line with aerospace requirements and plant capacity. Proactively identify risks or delays and implement corrective actions to protect customer commitments.
But what else? (advantages, specificities, etc.)
• Ensure planners execute essential functions including BOM analysis, material planning, timely requisition delivery to purchasing, work order release and management, revision control, ERP data accuracy, and on-time fulfillment of aftermarket customer requirements.
• Oversee inventory levels to meet company and aftermarket customer goals, ensuring alignment with financial targets and operational needs.
• Foster premier customer service for airlines, MROs, and other aerospace aftermarket clients by ensuring planning execution supports client expectations.
• Conduct risk assessment and mitigation activities specific to aftermarket supply chain challenges.
• Provide leadership through training, mentoring, and talent development, driving a culture of accountability, collaboration, and professional growth within the spares planning team.
• Execute strong working knowledge of MRP/ERP systems and other applicable planning tools, leveraging aerospace expertise to optimize performance.
• Collaborate with supply chain, operations, engineering, and quality teams to ensure aftermarket planning alignment with aerospace manufacturing standards and long-term business objectives.
• Other duties as assigned by the management team.
Candidate skills & requirements
Education: BS/BA degree required from an accredited university
Experience: Minimum of 7+ years of progressive planning, scheduling and inventory management experience in aerospace, automotive or mechanical manufacturing environment with the ability to lead and influence others, with 2+ years of the 7 years in a planning leadership position
Computer Skills:
• Experience working with MRP/ERP systems
• Proficiency with MS Office Skills (Excel, Word, PowerPoint, Outlook)
Other Skills:
• Broad knowledge of the field with proven management skills.
• Effective oral and written communications skills
• Demonstrated ability to handle multiple projects and assignments with attention to detail
• Problem solving, well organized, detailed oriented and accurate.
• Strong written and verbal business communications abilities must be comfortable delivering information to all levels of the organization including senior leadership.
• Working knowledge of business finance skills and abilities.
Additional Preferred Skills: (not required)
• BS/BA in supply chain, business management, or operations from an accredited university
• APICS CPIM and/or ISM certifications
• Experience in AS/ISO standards quality management experience.
• Problem-solving skills (Six Sigma Green Belt, etc.)
• Aftermarket or Spares Business experience
Description: Entry-level management position within field.
You will act as the Staff Mechanical Engineering Owner's Representative with technical expertise for mechanical engineering issues, design management of in-house and outside resources, code compliance, Disney design standards, documentation, specifications, and life cycle cost analysis for best value. This role also involves close collaboration with other engineering disciplines and multiple Disney project teams including FAM, WDI, Entertainment, and Operations.
You will report to the Senior Manager for MEP Engineering with DLR Architecture & Facilities Engineering.
What You Will Do
* Act as Owner's Representative on projects from concept through construction at the Disneyland Resort. Project types will include shops, rides, hotels, shows, maintenance facilities, and nearly any built facility and area development found on our property.
* Manage the design and development of contract documents of projects with in-house and outside resources to meet project scopes, schedules and budgets.
* Develop concepts and Request for Proposals (RFP)s.
* Attend, participate, and problem solve during site visits from concept through construction.
* Review drawings and specifications and ensure that all projects are designed and executed to applicable codes and statutes
* Work with stakeholders to provide civil engineering resources to develop project scope including design, planning and code compliance for estimation and feasibility.
* Resolve design issues creatively and thoroughly coordinating design with other disciplines.
* Develop clear technical analyses and recommend frameworks to inform executive review and approval.
* Partner with internal teams to develop, maintain, communicate, and enforce Walt Disney Company design guidelines, standards, master specifications, and details.
* As the owner's representative, you'll review with a focus on constructability, efficiency, and long-term maintainability.
* Liaison with City officials and external agencies to ensure project scope and implementation is coordinated and compliant with external requirements.
* Research Record Drawings in Disneyland Archives.
* Perform field work to investigate and assess mechanical related infrastructure in the Resort.
* Independently review new and existing design drawings and calculations.
* Review shop drawing submittals and respond to vendor requests for information per Resort standards.
* Coordinate design activities and monitor field installations and demolition work that comply with specifications and code requirements.
* Perform reviews of existing infrastructure: propose upgrades and replacements, present findings and recommendations.
* Serve as Engineer of Record on assigned projects, including signing and sealing construction documents when required.
* Design with focus on constructability, efficiency, and long-term maintainability.
* Expedite the receipt of sample submittals required for final design approval.
* Participate in weekly design coordination meetings and prioritize items to minimize schedule impacts.
* Assist Project and Design Managers to resolve design compliance issues relating to Projects requirements. Validate that all Item Specifications are consistent with products installed before archiving manuals.
* Support Executive Design Reviews by contributing technical content, analysis, and coordination as requested by Project or Design Management.
What We Look For
* 10+ years of experience in mechanical engineering design, HVAC/DX/VRF/CHW applications, central plant development and operational guidance, hydraulics, hydronics, compressed air, overall kitchen designs and implementation.
* Ability to support project partners in procurement and construction.
* Experience with AutoCAD, Revit, ACC, and other engineering-based software.
* Working knowledge of both National and Local Standards and Codes.
Required Education and Licensure
* BS Mechanical Engineering or related field from an ABET accredited university.
* Current registration as a Professional Engineer in the State of California in good standing.
#DXMedia #DXFOS #LI-YW1
Additional Information
Benefits and Perks: Disney offers a rewards package to help you live your best life. This includes health and savings benefits, educational opportunities, and special extras that only Disney can provide. Learn more about our benefits and perks at ( ) .
The hiring range for this position in Anaheim, CA is $126,800.00 to $154,800.00 per year. The base pay actually offered will take into account internal equity and also may vary depending on the candidate's geographical region, job-related knowledge, skills, and experience among other factors. A bonus and/or long-term incentive units may be provided as part of the compensation package, in addition to the full range of medical, financial, and/or other benefits, dependent on the level and position offered.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Lead, Electrical Engineer
Job Number: 34232
Job Location: Yorba Linda, California, On Site
Job Schedule: 4/10
Clearance: Must Have the Ability to Obtain and Maintain a Department of War Security Clearance
Job Description:
As a Lead Electrical Engineer, the candidate must have experience with L band RF systems, able to work from customer requirements to derive additional requirements, define the architecture of a possible solution based on requirements, setup a requirements schema & link requirements to documents (systems/subsystem specification, hardware/RF architecture description document, etc.) and flow down applicable requirements to other groups (software, ASIC, & test) so that they can contribute to realize the end solution based on the proposed architecture. The Lead EE will also oversee the development a qualification test plan that will ensure that the architecture and solution satisfy the customers' requirements. The Lead EE will also work with subject matter experts in the areas of GPS signal processing, anti-jam signal processing, other hardware design team members, control software, and government qualification standards. As a Lead EE, the candidate is expected to understand each aspect of the technology used in the proposed solution. The Lead EE also must work with the cost account manager, program management, and project management to develop the solution within the program's budget and schedule.
Essential Functions:
- Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design.
- Experience with RF systems, ideally GPS receivers
- Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
- Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
- Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design
- Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
- Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
- Ability to provide project management reports as required, support senior level and customer reviews as necessary.
- Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
- Ability to interface with the program's leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
- Ability to participate or lead in the product development process including design reviews.
- 5 to 10% Travel required.
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications:
- Required Education/Experience: Requires mastery level knowledge within a specific technical area or multiple job areas. Viewed as an expert and/or resource within the field by peers in and outside the organization.
- Bachelor's Degree and a minimum of 9 years of prior relevant experience.
- Graduate Degree and a minimum of 7 years of prior related experience.
- In lieu of a degree, a minimum of 13 years of prior related experience.
- Minimum of 5 years' experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
- 5 years' experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.
- 6 years' strong experience with receiver, Antenna, or Radio design (i.e. RF).
- 4 years' experience with embedded Hardware design.
- 2 years' experience with FPGA design with emphasis in digital signal processing (DSP)
- 4 years' experience demonstrating strong verbal and written skills
- 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, and Ansys HFSS
- 2 Years' experience with FPGA design tools such as Xilinx ISE, Xilinx EDK, and ModelSim
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills:
- Strong familiarity with GPS Module design and topology.
- Advanced with High-speed Analog design methodologies.
- Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
- Familiar with FPGA design methodologies.
- Proficient with DO-254 design.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is
Min $127,500.00 - $ 236,500.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $110,500.00 Min - $205,500.00 Max.
This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave,
paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
#LI-KM1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Scientist, Electrical Engineer
Job Number: 34122
Job Location: Yorba Linda, California, On Site
Job Schedule: 4/10
Job Description:
L3Harris is looking for candidates for the Scientist in Hardware and RF Electrical Engineering in our Navigation Solutions (NS) business in Yorba Linda, CA (IEC). The candidate will be responsible for and provide senior hands-on expert level in hardware and RF Electrical engineering on multiple programs. The candidate must have deep Engineering and broad Engineering technical expertise, industry recognition in defense and commercial applications, and experience in military GPS and Position Navigation and Timing (PNT) technology or other RF hardware designs and hands-on. Our Navigation Solutions products provide advanced military GPS and Position, Navigation, Timing (PNT) capabilities in military embedded real-time systems that can be used in weapons, ground, airborne, maritime, and space environments.
Essential Functions:
- Must provide overall hands-on technical expertise in Hardware and RF Electrical Engineering for NS programs.
- Expert hands-on knowledge of Electrical Engineering low frequency and high frequency (RF) analog and CCA design.
- Requires comprehensive level knowledge of Electrical Engineering low frequency and high frequency (RF) Analog and Digital circuit design. Experience with RF systems, ideally GPS receivers
- Able to contribute to providing innovative Electrical Engineering solutions consistent with business development plans.
- Ability to develop circuit designs, requirements, design descriptions, verification plans/procedures, customer CDRLs to meet program schedules.
- Ability to support cross functional teams for cross functional conflict resolution, Root Cause Analysis, blank page architecture developments and design
- Ability to contribute to algorithm development, analysis, implementation, system architecture, verification, and Test with emphasis on military GPS electronics.
- Ability to contribute to execution of design, build, integration and test activities, problem resolution and verifying that the deliverable products meet all program and customer requirements.
- Ability to provide project management reports as required, support senior level and customer reviews as necessary.
- Ability to provide inputs and reviews of the engineering technical baseline as part of proposal efforts.
- Ability to interface with the program's leadership and other teams (SW, Systems, ME, and Test) on a frequent basis, conduct or participate in customer and/or program technical review presentations, and provide progress status updates on work products.
- Ability to participate or lead in the product development process including design reviews.
- 5 to 10% Travel required.
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Qualifications:
- Bachelor's degree in electrical engineering and a minimum of 12 years of prior relevant experience.
- Graduate Degree and a minimum of 10 years of prior related experience.
- In lieu of a degree, minimum of 16 years of prior related experience.
- Minimum of 7 years' experience in ability to capture schematics design and PCBA Layout using modern EE CAD such as Altium or Mentor Graphics.
- 5 years' experience with project management and product design team leadership guided by individual annual goals and objectives with minimal oversight or direction; working in a team environment as an individual contributor.
- 8 years' strong experience with receiver, Antenna, or Radio design (i.e. RF).
- 4 years' experience with embedded Hardware design.
- 4 years' experience demonstrating strong verbal and written skills
- 7 Years experience with design tools such as MATLAB/Simulink, P-Spice, Agilent ADS (or AWR), Schematics Capturing/PCBA Layout tools such as Altium, Mentor Graphics, and Ansys HFSS
- Must have Secret Security Clearance or be able to obtain a US security clearance.
Preferred Additional Skills:
- Recognized as an Analog RF Electrical and Radio Receivers in industry.
- Experience and understanding in detailed RF receiver designs in military GPS, MGNSS, and other PNT technology.
- Strong familiarity with modern GPS Module design and topology.
- Advanced with High-speed Analog design methodologies.
- Experience with HAM radio is a plus.
- Advanced in MS Office, design tools such as Simulink/MATLAB, P-Spice, Altium (Schematics Capturing & PCBA Layout), Agilent ADS (or AWR), and Ansys HFSS.
- Proficient with DO-254 design.
In compliance with pay transparency requirements, the salary range for this role in California, Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is Min $153,000.00 - $284,000.00 Max. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New York state, Cleveland Ohio, and Vermont is $133,000.00 Min - $247,000.00 Max. This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location. L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays. The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.
#LI-KM1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do.
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Sr. Specialist, Systems Engineering
Job Code: 32594
Job Location:Yorba Linda, CA
Job Schedule: 4/10 or open to 9/80
Job Description: The Senior Specialist, Systems Engineer is an intermediate professional with practical knowledge of job area. Works without supervision to set objectives for own job area. Communicates with contacts inside and outside own team to explain and interpret operational processes, practices, and procedures. Identifies and addresses changes within own job area. Works to achieve operational targets with some impact on departmental results.Work consists of making basic adjustments to systems and processes to solve problems. Identifies, defines, and addresses general problems that are typically within the immediate job area. Problems are typically solved through drawing from prior experiences or standard procedures and basic analysis.
Essential Functions:
- Support digital engineering and Model-Based Systems Engineering (MBSE)
- Conducting trade studies
- Generation of requirements specifications
- Generation of functional block diagrams, use-case diagrams, etc.
- Integration and test planning, including generation of plans and procedures.
- Interfacing with the other engineering disciplines (e.g. mechanical, project, etc.) to ensure proper coordination of the systems aspects of the project.
- Generate and/or update drawings, parts lists, Engineering Orders, wiring lists, diagrams, and schematics.
- Generation of Engineering Change Orders
- Creation and presentation of design review materials
- Verification of system interfaces
- Must have the ability to travel.
- Work to influence others to accept individual or team's views or practices and changes to concepts, practices, and approaches.
Qualifications:
- Bachelor's Degree and minimum 6 years of prior relevant experience. Graduate Degree and a minimum of 4 years of prior related experience. In lieu of a degree, minimum of 10 years of prior related experience.
- Must have the ability to obtain and maintain a Security Clearance
- 5+ years of direct Engineering experience
Preferred Additional Skills:
- Direct experience working with at least one of the following technologies: Underwater Acoustics, Telemetry, Communications, Data Recording systems, and/or Radar.
- Excellent written and oral communication skills.
- Demonstrated initiative, drive, and interpersonal skills.
- Familiarity with DOORS requirements management software
- Familiarity with Model-Based Systems Engineering (MBSE)
- Proficiency with MS Word, Excel, and PowerPoint
In compliance with pay transparency requirements, the salary range for this role in California,
Massachusetts, New Jersey, Washington, and the Greater D.C, Denver, or NYC areas is $106,500 -
$197,500. The salary range for this role in Colorado state, Hawaii, Illinois, Maryland, Minnesota, New
York state, Cleveland Ohio, and Vermont is $90,500 - $168,500. This is not a guarantee of
compensation or salary, as final offer amount may vary based on factors including but not limited to
experience and geographic location. L3Harris also offers a variety of benefits, including health and
disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave,
paid time off, and company-paid holidays. The specific programs and options available to an employee
may vary depending on date of hire, schedule type, and the applicability of collective bargaining
agreements.
#LI-EB1
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish. For information regarding your Right To Work, please click here for English or Spanish.
Want to start your journey with the Navy?
Apply Now
Officer None
What to Expect
Surface Warfare Officer
More Information
Responsibilities
Surface Warfare Officers (SWOs) are involved in virtually every aspect of Navy missions. As a SWO, you may be in charge of any number of shipboard operations and activities while at sea, working with or within any of these specialized forces:
Aircraft Carrier Forces: Provide and coordinate air, submarine and surface ship defense for aircraft carriers.
Cruiser-Destroyer Forces: Provide ship attack and defensive measures with a wide array of missile and fire power capabilities, providing anti-air, -submarine and -surface warfare support.
Amphibious Forces: Embark and transport vehicles, equipment and personnel for amphibious assault operations.
Combat-Logistics Forces: Provide combatant ships with fuel, ammunition, food and supplies, and provide repair, maintenance and rescue capabilities through Fleet Support Ships.
Mine Warfare Forces: Detect, identify and neutralize threats from hostile use of maritime mines.
You may also be interested in becoming a Surface Warfare Officer within the prestigious Navy Nuclear community where you will have the opportunity to work on some of the world's most powerful nuclear-powered submarines and aircraft carriers.
Work Environment
As a Surface Warfare Officer, you will work at sea and on shore, in a variety of environments. Sea duty could place you aboard ships within the fleet. Shore duty may involve a tour of duty at the Pentagon, a student assignment at the Naval Postgraduate School in Monterey, CA, or command and management positions at shore bases and stations around the world.
Training & Advancement
Those pursuing an Information Professional Officer position are required to attend Officer Candidate School (OCS) in Newport, RI.
Unless they have already been commissioned through the Naval Academy or ROTC, those pursuing a Surface Warfare Officer position are required to attend Officer Candidate School. Newly commissioned SWOs can expect an advanced training process that includes comprehensive training at sea and ashore.
Newly commissioned Surface Warfare Officers will be assigned to a surface ship, leading a team of Sailors responsible for a component of the ship - anything from electronics to weapons to engineering systems. In this setting, Officers are working toward full Surface Warfare qualification.
After completing these initial sea tours, Surface Warfare Officers may be selected to serve on high-level staffs, commands or strategic projects or they may be selected to work in recruitment. The ultimate goal for many: to one day command their own ship.
Promotion opportunities are regularly available but competitive and based on performance.
Post-Service Opportunities
Specialized training received and work experience gained in the course of service can lead to valuable credentialing and occupational opportunities in related fields in the civilian sector.
Education Opportunities
Wherever you are in your professional career, the Navy can help ease your financial burdens and advance your career with generous financial assistance and continuing education programs. Beyond professional credentials and certifications, Surface Warfare Officers can advance their education by:
- Pursuing opportunities at institutions such as Naval Postgraduate School (NPS) or Navy War College (NWC)
- Completing Joint Professional Military Education (JPME) at one of the various service colleges
Qualifications & Requirements
A degree from a four-year college or university is a minimum educational requirement to become a Commissioned Officer.
There are different ways to become a SWO. If you're a high school student or an undergraduate, you can enter through the Naval Reserve Officers Training Corps (NROTC) or through the U.S. Naval Academy. Those already having a degree attend Officer Candidate School (OCS), a 12-week Navy school in Newport, RI.
All candidates must also be U.S. Citizens.
General qualifications may vary depending upon whether you're currently serving, whether you've served before or whether you've never served before.
Part-Time Opportunities
There are part-time opportunities available as a Surface Warfare Officer.
Serving part-time as a Navy Reserve Sailor, your duties will be carried out during your scheduled drilling and training periods. During monthly drilling, Surface Warfare Officers in the Navy Reserve typically work at a location close to their homes.
For annual training, Surface Warfare Officers may serve anywhere in the world, whether on a ship at sea or at bases and installations on shore.
Take a moment to learn more about the general roles and responsibilities of Navy Reserve Sailors.
Most of what you do in the Navy Reserve is considered training. The basic Navy Reserve commitment involves training a minimum of one weekend a month (referred to as drilling) and two weeks a year (referred to as Annual Training) - or the equivalent of that.
Surface Warfare Officers in the Navy Reserve serve in an Officer role. Before receiving the ongoing professional training that comes with this job, initial training requirements must first be met.
For current or former Navy Officers (NAVET): Prior experience satisfies the initial leadership training requirement - so you will not need to go through Officer Training again.
Officers who previously held a commission in another United States Military Service, National Oceanic and Atmospheric Administration, Public Health Service, or United States Coast Guard are exempt from attending ODS or LDO/CWO Academy.
Compare Navy Careers
See how a career as a Surface Warfare Officer compares to other Navy jobs.
Compare roles, pay and requirements for each job now.
- 2nd Shift Location: Brea, CA (On-site) Job Type: 12 Month Contract with potential to convert to permanent Pay Range: $29–$36/hour Pay rate will be finalized after interview Second Shift: Monday–Friday, 1:30 PM – 10:00 PM Position Overview A-Line Staffing is seeking Product Development Technicians to support laboratory and product development activities at an on-site facility in Brea, CA.
This role focuses on executing routine technical tasks, supporting engineers, performing testing, and maintaining accurate documentation in a regulated lab environment.
The ideal candidate is hands-on, detail-oriented, and comfortable working as part of a collaborative technical team.
Key Responsibilities Gather, format, compile, and maintain technical data such as laboratory results, material testing data, and engineering changes Prepare engineering documentation including reports, summaries, drawings, flow charts, block diagrams, and schematics Perform routine technical tasks and provide hands-on support to engineers Assist with equipment scoping, qualification, and validation activities Support general lab operations including equipment calibration, safety procedures, and routine maintenance Execute test protocols and conduct testing according to written procedures Document, analyze, and clearly communicate test results Support prototype process development and test setup creation Handle test samples and chemicals used for conditioning and testing Identify and communicate potential project risks or issues to team leads or management Collaborate closely with cross-functional team members Minimum Requirements 4-6+ years of experience in a laboratory environment (corporate or academic) and/or technician experience in a regulated environment 1-2+ years of experience in an R&D/Lab setting Experience following written procedures and working collaboratively in a team-based setting High school diploma or equivalent Preferred Qualifications Bachelor of Science degree in a technical or scientific field Ability to understand and execute designed test procedures Strong communication skills and ability to work in cross-functional teams Experience developing solutions to routine technical problems Proficiency with personal computers and technical documentation tools Ability to train or mentor junior technicians Key Responsibilities Gather, format, compile, and maintain technical data such as laboratory results, material testing data, and engineering changes Prepare engineering documentation including reports, summaries, drawings, flow charts, block diagrams, and schematics Perform routine technical tasks and provide hands-on support to engineers Assist with equipment scoping, qualification, and validation activities Support general lab operations including equipment calibration, safety procedures, and routine maintenance Execute test protocols and conduct testing according to written procedures Document, analyze, and clearly communicate test results Support prototype process development and test setup creation Handle test samples and chemicals used for conditioning and testing Identify and communicate potential project risks or issues to team leads or management Collaborate closely with cross-functional team members
