Engineering Jobs in Dracut, MA

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world. 

The Principal Product Engineer will learn the technical aspect of key product in the Andover, MA factory.  The Product Engineer will be product centric technical liaison, focused on driving collaboration across work centers and all disciplines to resolve technical issues, improve efficiencies and optimize overall product yield to ensure high-quality and cost-effective products and systems. You will utilize data analysis, CORE methodologies, and technical understanding to maximize overall product test yield, efficiency, and value.

What You Will Do

• Address major yield and technical issues highlighted by tech leads and factory operation managers.

• Perform data analysis and provide direction for overall product yield and performance improvement.

• Facilitate collaboration across manufacturing work centers and design engineering.

• Empower production test engineer to resolve complex failures through data driven troubleshooting technique.

• Establish technical understanding of the product architecture, subassemblies, and test requirement.

• Partner with test and design engineering team to develop sustaining solution to technical problems with root cause and corrective action identification.  

• Requires direct support of manufacturing test activities and spending a large amount of time directly on the factory floor in support of a highly demanding dynamic environment.

Qualifications You Must Have  

• Requires a Bachelor's degree in Science, Technology, Engineering or Math (STEM) and typically a minimum 8 years of relevant experience

• 4+ years in Production testing/troubleshooting

• The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Preferred majors: Electrical Engineering, Computer Science/Engineering Technology

• The ability to interpret and analyzer RF parametric data

• Experience with lean principles in a manufacturing environment

• Current DOD Secret Security Clearance

• Excellent communication skills (written and verbal) and presentation skills

• Good interpersonal skills to manage tasks that bridge operations, production control, engineering, supply chain, and customer relations

• Experience applying technical principles in the manufacturing life cycle

• Experience with Quality Systems and their application

• Shop Floor Management

• Strong engineering aptitude and analytical skills

• Technical problem solving

• Customer and company oriented and driven to meet or exceed expectations

• Ability to work cohesively in a team environment

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is not available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Systems Engineering, Integrated Systems Department is seeking a Systems Engineering Technical Lead for the NASAMS product line. This role requires strong technical expertise and engineering leadership skills to drive the design and development of world-class air and missile defense systems.

The Integrated Systems Department supports Raytheon by providing world-class weapon systems engineering. Domain expertise includes radar systems, effector systems, battle management, command and control, network design, battlespace integration, and interoperability for both domestic and international customers.

You will work alongside motivated engineers who are responsible for conducting systems engineering studies and trades; supporting system requirements definition and analysis; and contributing to algorithm development, integration, test, and evaluation.

What You Will Do

• Provide technical oversight and management for a variety of Systems Engineering efforts

• Concept and requirements development (including decomposition and flowdown) within a mature product-line

• Concept of Operations (CONOPS) development and design

• Algorithm optimization and development

• Multi-disciplinary development efforts across the kill-chain for an Air and Missile Defense System

• Collaboration with customer to bring new capabilities to the warfighter

• Functional analysis of real world and test data; trade studies to bring advanced features to fielded system

• Support and lead Internal and External Program and Design Reviews

• Collaborate with other IPT/CPT leads from the various functions and products

• Support and lead Internal Research and Development for future capability upgrades

• System integration and test support, including live fire test events

• Periods of travel up to 25% of time both domestically and internationally

Qualifications You Must Have

• Typically requires a degree in Science, Technology, Engineering or Mathematics (STEM) and a minimum of 8 years of prior relevant experience

• Experience with Air Defense Systems in systems engineering roles supporting development or production

• Experience with managing budget, scope and/or earned value

Qualifications We Prefer

• Experience interfacing with external customers and industry partners

• Excellent communication skills, written and verbal, with a variety of audiences

• Self-motivated, passionate leader

• 5+ years of experience in Air Defense Systems, Systems Engineering production or development

• Existing DoD Security Clearance

• Knowledge of Air Defense systems (examples – Patriot and NASAMS Systems)

• Experience managing competing programmatic priorities

• Experience making challenging technical decisions

• Familiarity with the Raytheon Integrated Product Development System (IPDS) or equivalent

• Experience with Earned Value Management (EVM) (plus, experience with Raytheon execution of EVM)

• Advanced degree in EE, CE, Physics, Math, ME, Aerospace\

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.

• Relocation assistance is available

Learn More & Apply Now!

Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.

Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms

Are you a hands-on Quality leader who thrives in high-accountability environments and believes great culture drives great results? We’re looking for a Site Quality Manager to lead all Quality functions at our North Billerica facility and play a key role in shaping performance, compliance, and team development.

If you’re passionate about building strong teams, driving continuous improvement, and ensuring world-class quality standards — this is your opportunity to make a measurable impact.

As the Site Quality Manager, you will:

• Lead and continuously improve our AS9100 / ISO 9001 Quality Management System
• Oversee MRB, NCMRs, CAPAs, SCARs, RMAs, and root cause investigations
• Direct all inspection activities (In-Process, Pre-Mold, Final) including AS9102 First Article Inspections
• Ensure cable and harness assemblies meet IPC-620, J-STD-001, AS9102, and customer requirements
• Review and approve work order packages, C of Cs, and shipment documentation
• Monitor quality metrics, defect trends, and drive Zero Defect initiatives
• Lead internal audits and support customer and certification audits
• Partner cross-functionally with Production, Engineering, Planning, Procurement, and Corporate Quality
• Develop and mentor the Quality team, building capability and accountability at every level
• Serve as the primary customer liaison for quality-related matters

Technical Expertise:

• Strong working knowledge of AS9100 Rev D and ISO 9001
• Experience with AS9102 First Article Inspection
• Familiarity with IPC-620 and J-STD-001 (Space Addendum a plus)
• Deep experience with NCMR, MRB, CAPA/RCCA, and root cause analysis
• Aerospace or military manufacturing background preferred
• Ability to read and interpret engineering drawings, wire lists, and MIL specs
• Experience in build-to-print cable/harness manufacturing is a plus

Leadership & Impact:

• 5+ years in Quality Assurance/Quality Control within manufacturing
• Prior team leadership experience
• Proven track record leading corrective actions to closure
• Experience conducting internal audits under AS9100
• Strong analytical skills with the ability to turn data into actionable insights
• Clear, professional communication with customers and suppliers

This is a high-visibility leadership role in a fast-paced aerospace manufacturing environment where quality is mission-critical.

Role Overview

The Key Account Manager (KAM) is responsible for managing and expanding Pion’s most

strategic customer relationships within the Boston market. This role is central to the

company’s growth strategy and carries meaningful ownership over revenue performance,

account expansion and long-term customer value.

The KAM operates with a high degree of autonomy and accountability, working in a

performance-driven environment where accurate forecasting, structured account

planning, and disciplined execution are essential. This is not a transactional sales role - it

requires strategic thinking, scientific credibility and operational rigor.

Key Responsibilities

Strategic Account Management

 Own and execute comprehensive account plans aligned to company growth targets

 Build deep, multi-level relationships across R&D, Analytical, CMC and Procurement

 Understand customer workflows, strategic priorities, and long-term pipelines

 Position Pion as a long-term partner through value-based, consultative engagement

 Identify expansion opportunities tied to new applications, enhanced products and

evolving customer needs

Sales Execution & Growth

 Deliver against defined revenue and growth objectives for assigned territory

 Manage complex sales cycles involving capital equipment, consumables and

services

 Maintain disciplined pipeline management, opportunity qualification and

forecasting

 Ensure CRM accuracy and timely updates to support operational planning and

leadership visibility

 Set and manage customer expectations around manufacturing schedules, lead

times and delivery constraints

Operational Excellence & Rigor

 Operate with a high level of structure, accountability and follow-through

 Partner closely with Operations, Manufacturing, Applications, and Service to drive

predictable outcomes

 Proactively identify risks and constraints, escalating appropriately and early

 Contribute to continuous improvement of sales processes, tools, and cadence

Customer Advocacy & Internal Collaboration

 Serve as the primary commercial owner for assigned territory accounts

 Coordinate internal resources to ensure successful installations, adoption and

ongoing value realization

 Act as the voice of the customer, providing actionable feedback to Product and

Leadership teams

 Navigate escalations and competitive pressures with professionalism and clarity

Market & Competitive Insight

 Maintain strong awareness of regional market dynamics, competitors and emerging

technologies

 Represent Pion customer meetings, scientific forums and industry events

 Identify high-growth opportunities within pharma, biotech, CDMOs and academic

institutions in the Boston ecosystem

Qualifications & Experience

Required

 Advanced degree in Chemistry, Pharmaceutical Sciences, Engineering or a related

scientific discipline preferred

 5+ years of experience in life sciences sales

 Demonstrated success managing complex, high-value strategic accounts

 Strong understanding of drug development workflows

 Ability to operate e􀆯ectively in a performance-driven, growth-oriented environment

 Strong organizational skills with a track record of operational discipline and

execution

 Willingness to travel regionally and occasionally nationally

Preferred

 Experience selling analytical instrumentation or pharmaceutical enabling

technologies

 Familiarity with capital equipment sales cycles

 MBA or advanced scientific degree

 Experience working cross-functionally within a global organization

What Success Looks Like

 Measurable contribution to Pion’s strategic growth targets

 Strong penetration and expansion within assigned key accounts

 Accurate forecasting and disciplined account management

 High customer trust and long-term partnership development

 Consistent demonstration of operational excellence and accountability

Why Join Pion

 Be part of a respected scientific company entering an exciting new growth phase

 Work with enhanced technologies that are expanding Pion’s impact in drug

development

 Operate in a role where individual performance directly influences company

success

 Collaborate with a knowledgeable, committed team focused on execution and

results

 Competitive compensation, incentive plan and benefits

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Position Summary

603 Manufacturing is growing, and we are looking for a hands-on, detail-driven NPI / Manufacturing Engineer who thrives on turning complex, high-reliability builds into clean, repeatable, audit-ready processes. This role is especially critical as we support customers in the space and aerospace sectors, where documentation, traceability, and process control are non-negotiable. If you get fired up about transforming first builds into flight-ready production systems, this role is for you.

What You’ll Do

Lead New Product Introduction (NPI)

• Own the manufacturing ramp-up for new cable and electro-mechanical assemblies
• Translate engineering drawings, specifications, and customer requirements into production-ready processes
• Support and fully document first piece builds from prototype through production release
• Ensure builds meet space and aerospace level workmanship and documentation standards

Develop Flight-Ready Work Instructions

• Create clear, visual, step-by-step work instructions for complex cable assemblies
• Standardize documentation across programs to meet customer and regulatory expectations
• Build controlled, revision-managed documentation packages
• Incorporate inspection criteria, torque values, crimp specifications, test procedures, and traceability requirements

Space and Aerospace Compliance

• Interpret and implement customer flow-down requirements
• Ensure compliance with applicable standards such as:
• IPC/WHMA-A-620, Space Addendum preferred
• NASA workmanship standards where applicable
• AS9100 principles and documentation rigor
• Establish full material traceability and lot control processes
• Support first article inspections and customer audits
• Build processes that are repeatable, traceable, and audit-ready

First Piece and Process Development

• Capture photos, tooling setups, fixturing, inspection points, and lessons learned during first builds
• Identify risk areas early including handling, routing, strain relief, testing, and labeling
• Define quality gates and inspection checkpoints
• Convert tribal knowledge into controlled documentation

Standardization and Continuous Improvement

• Develop scalable templates for cable assembly documentation
• Drive consistency across programs and operators
• Improve throughput while maintaining zero-defect expectations
• Reduce variability in high reliability builds

What Makes You a Great Fit

• 5 or more years in manufacturing engineering, NPI, or process engineering
• Direct experience supporting space, aerospace, or other high-reliability customers
• Strong understanding of:
• IPC/WHMA-A-620, Space Addendum strongly preferred
• First Article Inspection, AS9102 experience a plus
• Configuration control and revision management
• Lot traceability and material control systems
• Experience building processes that withstand customer audits
• Comfortable on the production floor. This is not a desk-only role.
• Process-driven, detail-focused, and quality-first mindset

Bonus Points If You Have

• Experience supporting NASA, commercial space, or defense programs
• Experience working in an AS9100 environment
• Familiarity with controlled documentation systems such as PLM, ERP, or QMS
• Lean or Six Sigma background
• Experience building documentation systems from scratch

What Success Looks Like

• New space programs transition from first article to stable production smoothly
• Documentation passes audits without scrambling
• Full traceability exists from raw material to finished assembly
• Operators have clear, easy-to-follow instructions
• Builds are consistent, repeatable, and flight-ready

Why 603 Manufacturing?

We support customers who cannot afford failure. When it goes to space, it must work.

At 603, we are building the systems, documentation discipline, and manufacturing rigor to support high-reliability programs. We need engineers who understand what that truly requires.

You will not just document processes here. You will build the foundation for flight-ready manufacturing.

Position Overview

603 Manufacturing is a high-reliability cable and harness manufacturer serving space, aerospace, and defense customers. We build mission-critical hardware where workmanship, documentation discipline, and on-time delivery are non-negotiable.

The Production Supervisor leads daily operations on the shop floor, ensuring safe, efficient execution of complex Class 3 and Space Addendum assemblies. This role is hands-on and highly visible. The Supervisor drives schedule adherence, labor efficiency, quality performance, and team development while maintaining strict compliance with AS9100 and customer-specific workmanship standards.

This is not a clipboard supervisor role. This leader is present on the floor, removes barriers, and drives flow.

Key Responsibilities

Execution & Delivery

• Own daily production performance against the master schedule
• Monitor WIP flow and eliminate bottlenecks
• Partner with Planning and Scheduling to prioritize work based on shipment commitments
• Ensure daily output aligns with monthly shipment targets
• Track and report schedule attainment and labor efficiency

Quality & Workmanship Discipline

• Enforce IPC/WHMA-A-620 Class 3 and Space Addendum standards
• Ensure strict compliance with customer workmanship specifications
• Drive first-pass yield and reduce rework
• Support internal audits, customer audits, and corrective actions
• Maintain disciplined documentation and traveler integrity

Team Leadership & Development

• Lead, coach, and develop a team of high-skill operators
• Conduct daily tier meetings focused on safety, quality, and delivery
• Promote cross-training and workforce flexibility
• Reinforce accountability and performance standards
• Support formal training requirements and certification tracking

Continuous Improvement

• Identify and eliminate waste (travel, waiting, excess handling, rework)
• Improve work cell layout and flow
• Support lean initiatives and standard work development
• Drive measurable improvements in throughput and efficiency

Compliance & Safety

• Ensure AS9100 process compliance within production areas
• Maintain ITAR and controlled data discipline
• Enforce ESD and FOD controls
• Maintain safe, organized work environments

Required Qualifications

• 5+ years of experience in aerospace, defense, or high-reliability manufacturing
• 2+ years of leadership or supervisory experience
• Strong understanding of IPC/WHMA-A-620 Class 3 (Space Addendum preferred)
• Ability to interpret complex engineering drawings and build documentation
• Experience working within AS9100 environments
• Strong problem-solving skills and bias toward action

Preferred Qualifications

• Experience supporting commercial space or launch vehicle programs
• Lean manufacturing experience
• ERP experience (Epicor preferred)
• Experience in controlled technical data environments (ITAR)

What Success Looks Like at 603

• Production schedules consistently achieved
• Improved labor efficiency and reduced stagnation in work cells
• High workmanship discipline and audit-ready documentation
• Strong cross-trained team with low rework
• A floor culture focused on accountability and flow

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Quality Manager – Direct Hire | 1st Shift

Chelmsford, MA

1st Shift

Direct Hire

About the Role

We are seeking an experienced Quality Manager to lead all Quality operations within a growing aerospace/advanced manufacturing environment. This role oversees quality systems, compliance, audits, supplier management, documentation, and continuous improvement initiatives. The ideal candidate brings strong leadership, deep understanding of AS9100, and the ability to drive a high‑performing quality culture.

Responsibilities

• Lead and develop the Quality team through coaching, training, performance reviews, and career planning.
• Manage and maintain all aspects of the Quality Management System (QMS), including AS9100 compliance, audits, and procedure updates.
• Oversee monthly/annual metrics, documentation control, ECO processing, and risk & opportunity tracking.
• Manage CAPA processes (customer, supplier, internal), NMR/MRB workflows, and GIDEP alerts.
• Serve as the primary quality interface for customers and suppliers, supporting reviews, issue resolution, and status updates.
• Support RFQ and Contract Review processes by validating requirements, flow‑downs, QA codes, and risk entries.
• Oversee supplier approvals, certification tracking, site visits, and quarterly supplier ratings.
• Manage calibration systems, PM documentation, government property equipment logs, and inspection activities (incoming, in‑process, final).
• Support NIST/CMMC compliance with IT and complete actions related to infrastructure and cybersecurity.
• Conduct new‑hire onboarding and coordinate training with HR and Manufacturing leadership.
• Maintain compliance with NAVSUP GFP requirements and conduct monthly walk‑around assessments.
• Drive continuous improvement across all quality processes and cross‑functional operations.

Minimum Requirements

• Bachelor’s degree in Business, Engineering, or related field
• 10+ years of relevant experience
• Strong written and verbal communication skills
• Analytical problem‑solving skills
• Background in Total Quality Management and process improvement
• IPC certifications a plus
• Ability to travel to customer sites as needed
• Attention to detail and strong organizational ability
• Experience in printed circuit boards or related manufacturing preferred