Engineering Jobs in Creve Coeur, IL

• Registered Professional Nurse (RN) License Current licensure in good standing as a Registered Nurse in the State of Illinois. Upon Hire
• Must possess and maintain current Basic Life Support (BLS) certification within 60 Days
• Crisis Prevention Institute (CPI) Training within 3 months.

• Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes
• Develops an individualized plan of care using a collaborative approach with the patient/family and health care team.
• Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes
• Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift
• Modifies plan of care based on evaluation
• Completes required documentation as appropriate, including patient chart and event reports
• Demonstrates professional accountability for own practice as evidenced through seeking resources and continuing self-development
• Demonstrates technical knowledge of equipment and troubleshoots when problems arise
• Acquires and maintains current knowledge and skills in evidence-based nursing practice
• Promotes the professional development of self and team members
• Shares clinical knowledge through normal teaching and in response to the learning needs of others
• Demonstrates a practical problem-solving approach to patient moving and handling issues (as applicable)
• Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable)
• Possesses knowledge and skills necessary to obtain adequate lab specimens for testing.
• Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.

• Analyzes clinical situations in a systematic way and acts to obtain resources or correct problems to meet or exceed expected outcomes or patient needs
• Recognizes need for assistance and utilizes resources, including physician and nurse to nurse (UAT) consultation in a timely manner
• Demonstrates ownership and persistence to ensure problem is resolved in best way possible.
• Able to assume assignment of non-complex and some complex patient management with some turnover in assignment
• Consistently prioritizes work based on changes in patient condition, changes in assignment and unanticipated interruptions
• Identifies and utilizes team resources to solve identified problems or needs
• Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes
• Works with other team members in delegating tasks and activities appropriately
• Provides goal-focused shift report
• Advocates with physicians on patient's behalf when necessary
• Utilizes communication and teamwork strategies aimed at promoting high team performance and achieving optimal patient outcomes and unit productivity
• Chooses an appropriate and meaningful communication style when interacting with others: gives and accepts constructive feedback to/from peers.

• Adapts teaching strategies based on patient's response, readiness to learn and level of comprehension
• Takes cultural, age-specific, gender, and developmental factors into consideration when teaching patients about procedures, illness, hospital experience, etc.
• Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals
• Demonstrates a practical problem-solving approach to patient moving and handling issues (as applicable)
• Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable)
• Consults appropriate resources within the hospital to provide specialized education
• Utilizes SVI patient education system as a resource for patients and family members

• Assures that the care provided is consistent with standards of care, evidence-based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital
• Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction
• Actively promotes and achieves customer satisfaction (patient, family, departments, physicians)
• Participates in the implementation of Performance Improvement initiatives
• Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs
• Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards
• Serves on unit-based councils
• Identifies practice problems on the unit
• Implements changes in own clinical practice based on literature and unit process improvement outcomes
• Works on assigned projects, data collection, audits as assigned

• Assesses patient's status through interview, observation and physical assessment of actual problems and outcomes.
• Develops an individualized plan of care using a collaborative approach with the patient/family and health care team.
• Uses appropriate interventions identified in the plan of care to achieve expected patient outcomes.
• Systematically evaluates and documents patient's progress toward expected outcomes/goals on an ongoing basis throughout the shift.
• Modifies plan of care based on evaluation and as needed based on changes in patient condition.
• Completes required documentation as appropriate, including patient chart and event reports.
• Demonstrates professional accountability for own practice as evidenced through seeking resources and continued self-development.
• Demonstrates technical knowledge of equipment and troubleshoots when problems arise.
• Acquires and maintains current knowledge and skills in evidence based nursing practice.
• Promotes the professional development of self and team members
• Shares clinical knowledge through informal teaching and in response to the learning needs of others.
• Demonstrates a practical problem solving approach to patient moving and handling issues (as applicable).
• Demonstrates skills to promote patient and staff safety through appropriate use of lift equipment (as applicable).
• Possesses knowledge and skills necessary to obtain adequate lab specimens for testing.
• Performs patient bedside lab testing and associated quality control in compliance with medical provider’s orders and hospital lab procedures/policies.

• Analyzes clinical situations in a systematic way and acts to obtain resources or correct problems to meet or exceed expected outcomes or patient needs.
• Recognizes need for assistance and utilizes resources, including physician and nurse to nurse (UAT) consultation in a timely manner.
• Demonstrates ownership and persistence to ensure problem is resolved in best way possible.
• Able to assume assignment of non-complex and some complex patient management with some turnover in assignment.
• Consistently prioritizes work based on changes in patient condition, changes in assignment and unanticipated interruptions.
• Identifies and utilizes team resources to solve identified problems or needs.
• Collaborates with the health care team in the organization of tasks and activities for the patient's care from admission to discharge according to the plan of care and to meet identified expected outcomes.
• Works with other team members in delegating tasks and activities appropriately.
• Provides goal-focused shift report.
• Advocates with physicians on patient's behalf when necessary.
• Utilizes communication and teamwork strategies aimed at promoting high team performance and achieving optimal patient outcomes and unit productivity.
• Chooses an appropriate and meaningful communication style when interacting with others: gives and accepts constructive feedback to/from peers.

• Adapts teaching strategies based on patient's response, readiness to learn and level of comprehension.
• Takes cultural, age-specific, gender, and developmental factors into consideration when teaching patients about procedures, illness, hospital experience, etc.
• Ensures patient safety in the hospital environment by following policy/procedures and adhering to National Patient Safety Goals.
• Consults appropriate resources within the hospital to provide specialized education.
• Utilizes SVI patient education system as a resource for patients and family members.

• Assures that the care provided is consistent with standards of care, evidence based practices, national patient safety goals, core measures and other quality initiatives undertaken by the unit/hospital
• Works with interdisciplinary team in identifying opportunities for improvement in patient care and patient/family satisfaction
• Actively promotes and achieves customer satisfaction (patient, family, departments, physicians).
• Participates in the implementation of Performance Improvement initiatives.
• Promptly and efficiently follows up on patient/family requests/needs - anticipates patient/family needs.
• Encourages coworkers in achieving excellent customer satisfaction; utilizes organizational service excellence standards.
• Serves on unit based councils
• Identifies practice problems on the unit
• Implements changes in own clinical practice based on literature and unit process improvement outcomes.
• Works on assigned projects, data collection, audits as assigned.

• Certified Clinical Medical Assistant (CCMA) – National Healthcareer Association (NHA)
• Certified Medical Assistant (CMA) – American Association of Medical Assistants (AAMA)
• Registered Medical Assistant (RMA) – American Medical Technologists (AMT)
• Nationally Registered Certified Medical Assistant (NRCMA) – NAHP
• Certified Medical Assistant (NCMA) – National Center for Competency Testing (NCCT)
• Registered Medical Assistant (RMA) – American Allied Health (AAH) or American Registry of Medical Assistants (ARMA)
• Basic Life Support (BLS) – American Heart Association (AHA) (Required within 30 days of hire)

• High School Diploma or GED required

• Patient Rooming: Efficiently gather patient history (family, social, surgical), record chief complaints, and perform medication reconciliation upon arrival.
• Medical Procedures: Perform diagnostic tests and clinical procedures, including:
  • Urinary catheterization and bladder scanning.
  • Suture/staple removal and cast application/removal.
  • Point-of-care testing and TB skin test readings.
• Medication Administration: Administer vaccines and medications per provider orders, including the ability to compound or dilute medications following competency testing.
• Specialty Care: Conduct detailed medical history intakes for prenatal appointments and manage lab results from RN worklists.

• Direct Communication: Manage telephone interactions with patients, families, pharmacies, and healthcare facilities to gather information or relay provider instructions.
• Health Education: Provide patients with written and verbal education regarding procedures, medications, and follow-up care using approved internal and external resources.
• Prescription Management: Facilitate prescription refills and pharmacy notifications according to department protocols and EMR documentation standards.

• Front Office Tasks: Oversee patient check-in/out, appointment scheduling, and verification of benefits.
• Care Coordination: Process prior authorizations and coordinate referrals or specialized testing.
• Compliance & Excellence: Maintain department-specific competencies in equipment handling and specialty training while excelling in team building and problem-solving.

Job Title: Operations Manager

Location: East Peoria, IL

Experience: 10+ Years

Job Summary:

Seeking an Operations Manager to lead end-to-end execution of wire harness design & manufacturing programs (similar to heavy equipment/OEM projects), ensuring seamless coordination between engineering, production, and suppliers.

Key Responsibilities:

• Manage operations for wire harness design-to-production programs
• Coordinate with design engineering teams on routing, BOMs, and release activities
• Oversee prototype builds, validation, and production launch
• Drive production planning, quality, and on-time delivery
• Collaborate with cross-functional teams (Electrical, Mechanical, Manufacturing, Suppliers)
• Ensure compliance with industry standards and customer requirements
• Monitor KPIs and drive continuous improvement (Lean/Six Sigma)

Required Skills:

• Strong experience in wire harness manufacturing + design support environment
• Understanding of routing, connectors, BOMs, and release processes
• Experience supporting OEM/heavy equipment/automotive programs
• Leadership and cross-functional program management skills
• Knowledge of ERP/PLM systems (Teamcenter/Windchill preferred)

FPC of Wake Forest has been retained to locate a Vice President of Operations and Supply Chain for a great client! This company is well-recognized in their industry and has a strong reputation for the design and manufacture of high-quality products.

So, what will you be doing as Vice President of Operations and Supply Chain?

-Own end-to-end Supply Chain and Operational strategy. Inclusive of Manufacturing, Operational Excellence, S&OP, and Procurement

-Ensure long-range plans for manufacturing and supply chain are developed and executed in alignment with overall business goals

-Develop a plan for the procurement and installation of new equipment/machinery for all manufacturing locations

-Implement Lean/Six Sigma methodologies to streamline process, improve quality, and reduce costs.

-Lead, mentor, and develop a diverse team of employees developing a collaborative, safety-focused culture.

To be successful, you will need:

-BS in Engineering, Operations, or Supply Chain

-20+ years of experience in manufacturing operations and supply chain

-5+ years of experience at an executive leadership level

-Direct experience leading a multi-site, geographically dispersed manufacturing footprint.

-Strong understanding of demand, supply, and production planning

-Ability to communicate to all levels of the organization

Things considered a plus:

-MBA

-Experience in building products, construction

-Six Sigma certification

-PMP certification

Excellent relocation package available!!

What to do next:

Now that you have had the chance to learn about the role, what are you waiting for?! Send me a copy of your resume (Word format or PDF preferred) so that I can learn more about the value that you can bring to the team! Your confidentiality is assured!!

• Will perform various mechanical and electrical assembly functions including, but not limited to, assembly of hydraulic equipment, installation and adjustment of mechanical components, mechanically finalize and test equipment prior to shipment
• Works from engineering prints, routings, and procedures with minimum supervision
• Will be responsible for quality and safety of own work including the use of appropriate protective equipment
• Under the direction of an Electrical Assembler, may install harness structures, cables, and power cables, but may not make final connections
• Will disassemble and load equipment for shipments as directed
• May perform light carpentry work such as designing, sawing, and build boxes, crates and ladders
• Use information systems, as necessary to perform job duties
• Operates equipment and performs inspection including appropriate documentation
• May work with Engineering Department on new model introduction or continuous improvement
  

• Well qualified candidates will demonstrate three or more years of experience in as an automotive, diesel, or heavy equipment mechanic. Three years in similar occupations such as aviation mechanic, marine mechanic, major appliance repair, or HVAC repair involving complex assembly, troubleshooting and repair will also be considered.
• Experience and expertise reading and utilizing blueprints to assemble and/or troubleshoot
• Basic math skills including addition, subtraction, multiplication, and division
• Computer literacy and experience using computer systems to document or retrieve information
• Demonstrated ability to work safely in an industrial environment
• Will be required to complete a physical commensurate with DOL Medium duty work requirements which includes drug testing.
  

• 
  
• Health benefits: Medical, dental, vision, HSA, wellness programs, etc.
  
• 401k and/or employee savings programs
  
• Employee time off (vacation and designated holidays)
  
• Employee and family assistance programs
  
• Disability benefits
  
• Life insurance
  
• Employee learning and development programs
  

Principal Duties/Responsibilities:

• 
  
• Partners with business subject-matter experts to translate business requirements into technical solutions
  
• Partners with Software engineers to translate business requirements into a technical requirements and solutions
  
• Partners with solution architects to provide a scalable and adaptable architectural solution
  
• Seamlessly integrates business and service strategy into enterprise architecture roadmap
  
• Promotes the use of a shared infrastructure and application roadmap to reduce costs and improve how information flows
  
• Prepares Business Process Model and Notation for as-is and to-be analysis
  
• Identifies opportunities to define/follow standard operating procedures
  
• Coordinates project efficiency and resources
  
• Manages process changes and effectively communicates with leadership status
  
• Applies knowledge of business process modelling notations (BPMN, EPC, BPEL) to documenting processes
  
• Performs data analysis utilizing SQL and other tools as necessary
  
• Facilitates requirements prioritization based on business value
  

Knowledge, Skills, Abilities (KSAs), & Competencies:

Essential KSAs:

• 
  
• Bachelor's degree in computer science management information systems, engineering or related field and three to five years of experience; or equivalent combination of both
  
• Ability to interpret business and technical documents
  
• Intermediate understanding of enterprise architecture and its organizational impact
  
• Ability to create compelling business cases with accurate cost and effort estimations
  
• Ability to quickly troubleshoot problems that may arise in work products
  
• Ability to work independently and effectively
  
• Ability to work on multiple tasks at any one time while maintaining high quality standards
  

Desirable KSAs:

• 
  
• Experience with RUP, Agile, Scrum, or TDD preferred
  
• Excellent written and verbal communication skills
  
• Intermediate understanding of information risk and enterprise architecture standards
  
• Intermediate understanding of various software development lifecycles
  
• Excellent software engineering skills ensuring sound technical solutions
  

Competencies:

• 
  
• Personal Discipline
  
• Communications
  
• Customer Focus
  

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; stoop, kneel, crouch; and talk or hear. The employee is also required to use a telephone with headset for verbal troubleshooting, frequent use of a standard keyboard and computer to document calls in a ticketing system, and occasional use of other office equipment. The employee must occasionally lift and/or move more than 30 pounds. The employee is occasionally required to sit for long periods and use close and color vision. Work is typically performed in a moderately noisy business office.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Principal Duties/Responsibilities:

* Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employee's job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employee's job specialty. Maintains in-depth technical knowledge of numerous systems as the employee's job specialty requires. Performs research and procedures as the employee's job specialty requires.

* Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems.

* Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis.

* Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology.

* Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability.

* Independently performs maintenance as per industry standards.

* Complies with 5S and housekeeping standards.

* May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks.

* Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation.

* Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required.

* Updates records and reviews CMMS history and analyzes data.

* Provides technical contents of sales quotations and performs T&M duties as required.

* Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned.

* Completes and conducts on-the-job training and technical self-study programs for career development.

* Follows all safety related policies, rules, regulations, technical instructions and guidelines.

Situational awareness and identify unsafe behaviors and conditions.

Knowledge, Skills, Abilities, & Behaviors Required:

* High School Graduate or equivalent (GED).

* Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry.

* Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment.

* Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs.

* Must be able to use hand tools and specialized tools as appropriate.

* May be required to travel.

* Six Sigma experience desired.

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

Principal Duties/Responsibilities:

* Identifies magnitude of error sources contributing to uncertainty of results through root cause analysis to determine reliability of measurement process in quantitative terms

* Redesigns or adjusts measurement capability to minimize errors

* Develops and/or validates calibration methods, techniques, and procedures based on principles of measurement science, technical analysis of measurement problems, and accuracy and precision requirements

* Creates documentation and reporting to adhere to national and/or international testing standards, including ISO17025

* Provides leadership, direction and technical guidance to calibration specialists, technicians and administrative staff

* Provides high-level technical expertise, oversight and project management support for the operations of the Standards Laboratory, Measuring & Test Equipment (M&TE) related services, and Quality Assurance (QA) requirements for internal and external customers

Knowledge, Skills, Abilities, & Behaviors Required:

* Bachelor's degree in Engineering, Physics, or related field and five years metrology, engineering or operation and maintenance experience; or equivalent combination of education and experience

* At least five years previous experience working in an industry related to calibration and/or M&TE

* Experience performing data collection and calculations for measurement uncertainties

* Expert knowledge in areas of metrology, including Flow, Electrical, Dimensional, and Physical

* Ability to formulate policies and procedures relevant to program areas based on information of a conceptual nature from varied and complex sources

* Demonstrated success gaining an internationally recognized accreditation in calibration and/or testing, including ISO17025, Z540

Physical Demands and Working Conditions:

While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors.

ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more.

• Serves as the LPHA for Integrated Assessment and Treatment Plan (IATP) Ensures the IATP is compliant with regulations and best practices
• Provides clinical feedback and guidance to clinicians to ensure medical necessity and diagnosis are supported.
• Ensures appropriate treatment recommendations Ensures completion of risk assessment and appropriate safety planning steps.
• Ensures completion of all required screening and/or assessment tools and utilization of results in treatment planning.
• Completes documentation supporting all activities related to review and authorization of the IATP.
• Performs diagnostic assessments, collects diagnostic information, and determines immediate treatment plan needs with patients.
• Requests medical consultation, where indicated, in a diligent and timely manner.
• Completes treatment plan in conjunction with patient, identifying goals/objectives that are connected to needs identified in the assessment.
• Provides behavioral health therapy to individuals, families and/or groups identified as having behavioral health needs.
• Coordinates with Emergency Response Service and other crisis service teams for clients presenting who may be a danger to self or others.
• Maintains records in accordance with TrilliumPlace policies, as well as state and federal oversight agencies and accreditation agencies including Joint Commission, Medicaid, Medicaid Rehabilitation Option, Illinois Department of Public Health, and Commercial Insurances.
• Acts as a liaison and resource between the community and patient needs; coordinates treatment goals with community agencies, primary care physicians, court system, and managed-care entities.
• May provide supervision to Carle Health clinicians who provide assessment and treatment.
• May supervise counseling or social work students assigned to department.
• Participates in in-service and competency training of students or staff. Prepares special reports as needed on activities, and work group activities.
• Meets clinical productivity standards and compliance standards for all documentation and clinical charts.