Engineering Jobs in Co

Job Category: Operations Field

Requisition Number: KELSO018895

Full-Time Nationwide +1 more locations

Primary Job Responsibilities:

• Practice safety rules.
• Follow verbal and written instructions.
• Safe use of hand & power tools.
• Report to and assist immediate supervisor.
• Perform quality work as determined by project specifications.
• Accountable for all tools and materials at the end of your shift.
• Must work well as part of a team.
• Able to perform terminations up to 1500V ac and dc
• Able to read construction drawings and understand construction specifications.
• Have a basic understanding of electrical systems.
• Able to install underground cabling and conduits.
• Able to run basic electrical test equipment.
• Able to work with, train and mentor helpers.
• Must comply with company's drug and alcohol abuse policy.
• Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
• Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
• Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
• Able to carry 50 lbs. of tool and/or materials. It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
• Must be able to stand or walk for long periods of time.
• Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
• Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.

Work Location

• Industrial construction sites and/or fabrication shops.

Mobility Barriers

• Uneven ground
• Obstructed pathways
• Work at low/high elevations
• Confined workspaces

Environmental Conditions

• Predominantly outdoor work
• Exposure to:
  • Extreme heat or cold
  • Humidity, rain, and other weather conditions
  • Loud noise from tools and machinery
  • Potential chemical exposure

Education & Experience Requirements:

• One (1) to four (4) years of experience in specified skill (depending on mechanic level).
• Post-offer drug/alcohol screen and physical evaluation.
• New Hire Orientation Quiz
• Applicant/employee must not pose a direct threat to the health or safety of such individual or others in the workplace.
• Job site safety requirements as required by the client (clean shaven, long sleeves, steel toe boots, etc.).
• Safety equipment as required by the client (hard hat, safety glasses, gloves, respirator, hearing protection, safety harness with lanyard, etc.).

Company Overview:

Primoris Services Corporation is a premier specialty contractor providing critical infrastructure services to the utility, energy, and renewables markets throughout the United States and Canada. Built on a foundation of trust, we deliver a range of engineering, construction, and maintenance services that power, connect, and enhance society. On projects spanning utility-scale solar, renewables, power delivery, communications, and transportation infrastructure, we offer unmatched value to our clients, a safe and entrepreneurial culture to our employees, and innovation and excellence to our communities.

Benefits:

• 401k w/employer match
• Health/Dental/Vision insurance plans
• Paid time off
• Stock purchase plan

EEO Statement:

We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Agency Statement:

We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR.

Job Title: Mechanical Engineer – New Product Introduction (NPI/NTI)

Location: Onsite, Boulder, CO

Type: Full-time, Contract (1 YEAR +)

Job Summary

In this role, you will serve as a contract Mechanical Engineer within the Analytical Instrument R+D Hardware Engineering team. The role is dedicated to designing and updating mechanical systems and sub-assemblies for research programs investigating new technologies as well as for product development projects launching new analytical instrumentation.

Essential Functions and Responsibilities

• Collaborate with cross-functional teams to research novel technologies and design new instrumentation to demonstrate project feasibility and meet specifications
• Participate in design activities, including design reviews, prototyping, and communication of schedules, milestones, and statuses to project teams
• Create component and assembly CAD files, specify materials, and establish performance criteria and standards for mechanical designs
• Develop and execute test plans to qualify instrument prototypes and sub-assemblies; troubleshoot using strong engineering principles and document results
• Generate instrument documentation, such as bills of materials and specification sheets for purchasing; follow Configuration Management processes to release part documentation using an ERP system
• Design and fabricate test fixtures for prototype and pilot production environments
• Optimize sheet metal design, aluminum casting, and component placement for usability, maintenance, and manufacturability

Knowledge, Skills & Abilities – Required

• Ability to design and assemble prototypes
• Mechanical hand tools and machine shop experience
• Proficient in reading, interpreting, and creating mechanical drawings, especially for sheet metal, plastic injection-molded, and machined parts utilizing GD&T per ASME/ANSI Y14.5M
• Experience in tolerance analysis to ensure proper fit and function
• Expertise with SolidWorks CAD and SolidWorks PDM for configuration management
• Strong problem-solving skills with a hands-on approach to troubleshooting
• Excellent written and verbal communication skills for collaboration
• Experience with document management and change control
• Quick learner with an aptitude for understanding complex mechanical sub-assemblies and 3D models
• Working knowledge of manufacturing techniques and processes
• Ability to interpret technical material, define problem statements, create test plans, collect data, establish facts, and communicate conclusions effectively

Preferred Skills

• Ability to translate user needs into product and functional requirements
• Familiarity with a wide range of mechanical design options (3D printed, machined, cast, stamped, welded, injection molded, sheet metal parts)
• Experience collaborating with cross-departmental teams

Key Characteristics

• Excellent interpersonal skills with focus on engagement, teamwork, and a positive attitude
• Self-starter capable of independent work, solution formulation, and prioritization
• Strong organizational skills including attention to detail, time management, and multi-tasking
• Meticulous, detail-oriented, and delivers high-quality outcomes
• Enjoys collaborating to solve technical challenges
• Creative, critical thinking, and agile problem-solving approach
• Adaptable and open to adjusting methods based on new information
• Thrives in fast-paced projects; capable of making quick, well-reasoned decisions
• Inquisitive and passionate about learning
• Willing to try new approaches, iterate quickly, and learn from failures
• Agile mindset, able to explore parallel options and recommend best approaches

Qualifications

• Required Education: Bachelor’s Degree in Mechanical Engineering
• Solidworks design experience
• Required Experience: Minimum 7+ years in product design, development, and testing of mechanical subsystems

Position: Senior Software Engineer

Compensation: $140-$160k, depending on experience

Location: Coppell, TX

Inceed has partnered with a great company to help find a skilled Senior Software Engineer to join their team!

Are you ready to make a measurable impact within a dynamic team? This opportunity is perfect for a full-stack, senior engineer who thrives on owning complex systems end-to-end, balancing modernization with stability. This team values collaboration and innovation.

Key Responsibilities & Duties:

• Design, build, and maintain scalable .NET applications
• Modernize and extend existing systems
• Partner with Solution Architect for architectural patterns
• Prioritize technical debt with the agile team
• Build and maintain CI/CD pipelines
• Collaborate with product owners to solve business problems
• Monitor application health using logs and metrics
• Create and maintain system documentation
• Support user acceptance testing and production releases
• Stay current with relevant technologies and share knowledge

Required Qualifications & Experience:

• 5-8 years of software engineering experience with .NET and C#
• 3-5 years of experience with TypeScript and modern web applications
• Experience designing and maintaining SQL Server databases
• Strong experience with REST APIs in C#
• Experience with containerized applications
• Experience in Agile delivery environments
• Experience with public cloud solutions, preferably Azure

Nice to Have Skills & Experience:

• Experience in Financial Services
• Experience with modern reporting tools like Power BI
• Experience with legacy technologies
• Knowledge of architectural and design principles

Perks & Benefits:

• This opportunity includes a comprehensive and competitive benefits package—details will be shared during later stages of the hiring process.

Other Information:

• Hybrid work schedule
• This position requires a background check and credit check

If you are interested in learning more about the Senior Software Engineer opportunity, please submit your resume for consideration. Our client is unable to provide sponsorship at this time.

We are Inceed, a staffing direct placement firm who believes in the possibility of something better. Our mission is simple: We’re here to help every person, whether client, candidate, or employee, find and secure what’s better for them.

Inceed is an equal opportunity employer. Inceed prohibits discrimination and harassment of any type and affords equal employment opportunities to employees and applicants without regard to race, color, religion, sex, sexual orientation, gender identity, or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Title: Transmission Engineer – High Voltage Transmission

Location: Flexible / Hybrid (U.S.)

Hire Type: Direct Hire

Shift/Hours: Monday–Friday, standard business hours

Base Salary: $110,000 – $150,000 (DOE)

Benefits: Medical, Dental, Vision; PTO; 401(k); Career Growth Opportunities

About the Opportunity

An engineering organization is seeking a Transmission Engineer to support the design, analysis, and engineering of high-voltage transmission line projects. This role focuses on developing detailed engineering packages, performing system analysis, and supporting construction activities for 69kV–500kV transmission infrastructure. The position offers the opportunity to work on complex utility projects while collaborating with multi-disciplinary engineering teams.

Job Duties

• Perform engineering and design of high-voltage transmission lines (69kV–500kV) using PLS-CADD.

• Prepare construction documentation, including plan and profile drawings, structure loading trees, and foundation and assembly drawings.

• Conduct engineering analysis to ensure system reliability, safety, and efficiency.

• Provide field support during construction and assist with technical issue resolution.

• Plan, schedule, and coordinate engineering activities across project teams.

• Apply and adapt standard engineering techniques, codes, and industry standards.

• Develop solutions to complex engineering challenges and support project studies.

• Assist with preparation of engineering reports and technical documentation.

Qualifications

• Bachelor’s Degree in Engineering from an ABET-accredited program required.

• 8–15 years of transmission engineering experience.

• PLS-CADD proficiency required.

• Experience supporting high-voltage transmission line design projects.

• Professional Engineer (PE) license preferred or ability to obtain within 3 months.

• Strong analytical, problem-solving, and communication skills.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin.

Supply Manager, Sourcing, Raw & Direct Materials, Manufacturing

Denver CO.

HYBRID

Competitive Salary [about $116K] Bonus, Full & Comprehensive Benefits, World Class Manufacturer

The Category Manager – Direct Materials is accountable for developing and executing sourcing strategies that optimize cost, quality, and supply continuity across s operations. This role leads complex, multi‑facility sourcing initiatives; drives supplier performance and capability development; and partners closely with R&D, Product Management, and operations teams to deliver measurable business results.

• Do you have experience sourcing raw or direct materials for manufacturing plants?

Key Responsibilities

Strategic Sourcing & Category Performance

• Develop and execute data‑driven sourcing strategies for resale product categories to improve cost structure, mitigate risk, and enhance supplier value.
• Build and maintain robust should‑cost models to guide negotiations, evaluate pricing proposals, and support long‑term cost optimization.
• Deliver year‑over‑year cost savings through structured negotiations, supplier workshops, competitive bidding, value engineering, and supply‑base rationalization.
• Monitor and report category performance using monthly scorecards, KPIs, and executive‑level updates.

Project & Supplier Management

• Lead multi‑functional project teams—spanning R&D, Product Management, Operations, Finance, and Quality—to qualify new suppliers, onboard new products, and support product innovation initiatives.
• Drive supplier development programs to enhance supplier capabilities, improve quality, and ensure long‑term alignment with business objectives.
• Manage contracts across the resale category, ensuring compliance, performance tracking, and timely renewals.
• Identify and implement process improvements that streamline supply chain operations and eliminate inefficiencies.

Cross‑Functional Collaboration & Stakeholder Engagement

• Serve as the primary commercial interface for internal stakeholders across facilities, ensuring seamless communication, alignment, and timely issue resolution.
• Partner with R&D and Product Managers to evaluate alternative materials, support new product development, and enable sustainable sourcing decisions.

Risk Management & Supply Continuity

• Ensure uninterrupted supply of resale products to facilities by proactively identifying risks, developing contingency plans, and maintaining strong supplier relationships.
• Conduct root‑cause analyses for supply disruptions and lead corrective‑action initiatives in partnership with suppliers and internal teams.

Qualifications

Education & Experience

• Bachelor’s Degree required.
• Minimum 5 years of experience in supply chain or related experience, 3 of which should be experience sourcing with a major organization.
• CPSM certification desirable.

Technical Skills

• Demonstrated experience with should‑cost modeling and cost‑analysis techniques.
• Strong contract negotiation skills, working knowledge of contract development, contract law.
• Working knowledge of commodity management principles and e‑sourcing tools.
• Experience with SAP/similar ERP system; proficient: Microsoft Word, Excel, PowerPoint, Outlook.

Leadership & Soft Skills

• Proven ability to manage supplier relationships and lead cross‑functional projects to successful outcomes.
• Excellent interpersonal, verbal, and written communication skills, including presenting to non‑technical audiences.
• Strong analytical, strategic‑thinking, and problem‑solving abilities.
• Proactive, collaborative approach with openness to feedback, mentoring, and continuous improvement.

Skills and Certifications [note: bold skills and certification are required]

Experience managing $20M in spend

Contract experience. Sourcing direct materials for a manufacturing company

Candidate Details: 5+ to 7 years’ experience

Seniority Level – Associate/Management Experience Required - No

Minimum Education - Bachelor's Degree

Screening Questions:

Do you have experience sourcing raw or direct materials for manufacturing plants?

Ideal Candidate: Candidate must come from another manufacturing company where they are sourcing raw or direct materials.

CONTACT/SEND RESUME:

Bill Marek - CEO

4

WWW.VPRECRUITERS.COM

Senior Mechanical Engineer

About Us:

At OptiGrid, LLC, we’re on a mission to electrify the future—beyond the grid. We build cutting-edge battery-based energy storage systems that deliver ultrafast charging for electric vehicles (EVs) and provide clean, affordable, and resilient power alternatives for site hosts. Our work is transforming how energy is distributed and accelerating sustainable electrification.

We’re growing fast and looking for passionate problem-solvers who thrive on innovation and want to make a real impact. If you’re resilient, creative, and ready to challenge the status quo, join our team of trailblazers, enthusiasts, and change-makers.

Position Overview:

As a Senior Mechanical Engineer at OptiGrid, you’ll be the driving force behind transitioning innovative product designs from R&D into full-scale production. Your expertise will directly influence product performance, reliability, and customer satisfaction—opening new markets and driving our technology forward.

You’ll collaborate with talented R&D engineers and manufacturing teams, guiding production line layouts, functional tests, and quality checks. Your work will ensure that every product meets the highest standards of manufacturability and quality, while continuously improving design and process efficiency.

What You’ll Do:

• Lead Product Introduction: Own the introduction of new mechanical components into production, ensuring seamless transitions from prototype to volume manufacturing.
• Optimize Manufacturing: Work with manufacturing teams to define assembly order and process for efficient production line layouts.
• Drive Design Excellence: Coordinate design for manufacturability reviews with suppliers, and organize implementation status to guarantee robust, scalable solutions.
• Innovate Testing: Design functional test equipment and create comprehensive test plans to achieve product testing objectives.
• Solve Problems: Diagnose and resolve manufacturing and quality issues for parts and assemblies in production, ensuring reliability and performance.
• Engineer Documentation: Prepare or revise drawings of mechanical parts, wiring harnesses, and schematics derived from specifications and product requirements.
• Collaborate & Build: Coordinate and participate in the assembly of early production units, supporting cross-functional teams for new product introduction.
• Validate & Improve: Perform mechanical integrity testing on prototypes, support third-party compliance testing, and drive continuous improvement.

Requirements:

• Bachelor’s degree in Mechanical Engineering or equivalent from an accredited institution
• 5+ years in electronics manufacturing, with a track record of successfully launching products from concept to full-scale production.
• Demonstrated expertise in transitioning designs into volume production using sheet metal, extrusion, and injection molding processes—your skills will help us deliver reliable, scalable solutions.
• Advanced proficiency in 3D CAD design and a deep understanding of ASME Y14.5 standards, ensuring precision and manufacturability in every project.
• Exceptional written and verbal communication abilities, enabling you to collaborate effectively across teams and present ideas with clarity and impact.

Bonus Points:

• 10+ years of hands-on experience in electronics packaging, demonstrating mastery in complex, high-performance systems.
• Proven track record in designing and manufacturing Electric Vehicle Supply Equipment (EVSE) products
• Experience with lithium-ion battery system manufacturing, enabling you to drive reliability and safety in next-generation energy solutions.
• Proficiency in PTC Creo Parametric, including Sheet Metal & Cabling Extension and Harness Manufacturing Extension (HMX)
• Skilled in Arena and Windchill PLM systems, streamlining product lifecycle management and accelerating time-to-market.

If you’re passionate about pushing boundaries and eager to make a real impact, we’d love to see how your expertise can help us deliver world-class products.

OptiGrid offers competitive benefits, including:

• Health, Dental & Vision Insurance
• Short- & Long-Term Disability Insurance
• Life Insurance
• PTO

At OptiGrid, LLC, we offer fair and equal opportunities to all our candidates and team members regardless of race, color, religion, sex, pregnancy, sexual identity, national origin, citizenship, marital status, disability status, parental status, protected veteran status, or any other characteristics protected by law. OptiGrid, LLC believes in hiring individuals only based on their qualifications and experiences that meet our business requirements to fill the positions.

Outside Sales Representative | Unlimited Commission

Build a business — not just another sales job.

Schaeffer Manufacturing | Remote | 1099

Schaeffer Manufacturing is looking for self-driven professionals who want to build a long-term, repeat-order business through relationship-based selling.

With 185+ years of American-made manufacturing excellence, Schaeffer Oil delivers premium lubricants and fuel additives that reduce downtime, improve performance, and lower operating costs across industrial and fleet markets.

What you’ll sell:

• Industrial lubricants & hydraulic oils

• Heavy-duty engine oils & greases

• Fuel additives & specialty products

(Consumables that drive repeat business)

Who you’ll work with:

Manufacturing • Fleet • Construction • Agriculture • Mining • Food Production

Why this role works:

• 1099 independent contractor

• Unlimited commission + bonuses

• Income tied to account growth

• Six-figure potential for disciplined builders

• No micromanagement or hourly quotas

We provide:

Proven products • Brand credibility • Technical & sales training • Marketing tools • Support teams

You build:

Your book of business • Recurring revenue • Long-term income • Your own schedule

This is a business ownership opportunity for professionals who value independence, scalability, and relationship-based selling.

Interested?

Apply to learn more about the opportunity in your local market.

The HVAC Segment Sales Enablement Manager will drive consistent, effective sales execution across the HVAC segment by leading enablement initiatives, advancing Salesforce platform adoption, and coordinating large project opportunities across Business Units (BUs). This role is critical to our organic growth by improving pipeline visibility, execution discipline, and conversion of complex HVAC projects.

Working closely with Segment leadership, Sales leaders, BU commercial teams, Marketing, and IT, this role serves as the central coordinator for sales onboarding, process adoption, governance, and execution consistency across the HVAC segment. The Sales Enablement Manager ensures Salesforce is leveraged as the system of record to support opportunity management, forecast accuracy, and cross-BU collaboration. The role also reinforces a standardized lead-to-close process to drive visibility, accountability, and conversion throughout the sales cycle.

Reporting to the HVAC VP, Strategy, this highly collaborative role blends process, systems, and commercial rigor with strong business partnership. Success in this role includes achieving >85% active Salesforce usage, improving data quality, reducing pipeline past due, and increasing forecast reliability. Most importantly, sales teams feel supported—not burdened—by tools and processes, with clear visibility into large projects and strong confidence in pipeline health and commercial execution.

Key Responsibilities

• Lead Salesforce rollout, adoption, and ongoing enablement across the HVAC segment
• Drive HVAC Segment revenue growth through disciplined opportunity management
• Act as HVAC’s central governance body for Salesforce enhancements, data standards, training, and best practices; Own HVAC Segment Salesforce governance and enhancement prioritization
• Partner with IT, Sales Operations, and BUs to translate business needs into scalable CRM functionality (including enhancements beyond standard configuration)
• Own training, documentation, and change management to drive adoption, data quality, and consistent usage
• Ensure Salesforce supports a standardized lead-to-close process, including opportunity progression, forecasting, and large project tracking
• Coordinate large, complex HVAC project opportunities across BUs to improve visibility, collaboration, and execution; Establish consistent execution process for large project and pipeline reviews
• Develop and maintain dashboards, KPIs, and reporting to support pipeline health, forecast accuracy, and conversion
• Use data and insights to identify gaps, drive accountability, and inform continuous improvement

Qualifications

• Bachelor’s degree in Business, Marketing, Engineering, Information Systems, or related field
• 5+ years of experience in sales enablement, sales operations, commercial excellence, CRM leadership, or related roles
• 2+ years of hands-on Salesforce (or other CRM) experience, including deployment, adoption, training, and ongoing optimization
• Experience supporting complex, project-based, or engineered-to-order sales environments (HVAC, industrial, capital equipment, or similar preferred)
• Strong understanding of lead-to-close sales processes, opportunity management, forecasting, and pipeline discipline
• Experience partnering with IT, Marketing, Sales, and other functions to define requirements, prioritize enhancements, and deliver scalable CRM solutions (including functionality beyond standard out-of-the-box)
• Demonstrated ability to lead change management, training, and adoption initiatives for field sales teams

Core Competencies

• Execution Discipline: Brings structure, rigor, and follow-through to sales processes
• Systems & Process Thinking: Translates business needs into scalable CRM and enablement solutions
• Collaboration & Influence: Drives alignment without direct authority
• Data & Analytics Orientation: Uses metrics to guide decisions and accountability
• Change Management: Enables adoption of new tools and ways of working
• Communication: Clear, confident communicator with field teams and leadership

Travel & Location

• Travel: ~25–35% to support BU teams, training, and key initiatives
• Location: Flexible / Hybrid, aligned with SPX HVAC leadership locations (Overland Park, KS; Chicago, IL; Charlotte, NC; St Louis, MO)

How we live our culture

Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX.

What benefits do we offer?

We know that the well-being of our employees is integral. Our benefits include:

• Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave
• Competitive health insurance plans and 401(k) match, with benefits starting day one
• Competitive and performance-based compensation packages and bonus plans
• Educational assistance, leadership development programs, and recognition programs

Our commitment to embrace diversity to build a culture of inclusion at SPX

We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential.

SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis.

Company Description

Aroxx Systems, headquartered near Fort Gordon, GA, is a leading provider of Information Technology consulting services with a core focus on System Engineering within the DOW Information Network (DOWIN), including both Tactical and Enterprise domains. The company is composed of innovative, highly skilled, and experienced IT systems engineers. Aroxx Systems is dedicated to developing robust and secure technical frameworks that empower the warfighter by delivering resilient and scalable capabilities. With a commitment to excellence, Aroxx Systems supports mission-critical DOW operations.

Role Description

This is a full-time, on-site role for a Field Services Engineer (RAPT-TR) based in Fort Carson, CO. The Field Services Engineer will be responsible for delivering comprehensive on-site technical support and support all Unit exercises as required (CONUS and OCONUS) performing equipment troubleshooting, conducting preventive maintenance, and addressing customer service requests. Experience with the family of waveforms, including but not limited to, Single Channel Ground and Airborne Radio System (SINCGARS), Second generation Anti-jam Tactical UHF Radio for NATO (SATURN), Very High Frequency/Ultra High Frequency (VHF/UHF) Line of Sight (VULOS), Warrior Robust Enhanced Network (WREN) Narrowband (NB), Tactical Scalable Mobile Ad Hoc Network (MANET), the Tactical Scalable Mobile (TSM) and WREN-TSM, Mobile User Objective System (MUOS), and Radio Services products including the enterprise Over the Air Management (eOTAM); Software Defined Radio (SDR) the Leader Radio, Manpack, and Combat Net Radio (CNR) Tactical radios and radio requirements. Additionally, Knowledge and understanding of Communications Security (COMSEC) requirements for waveforms and SDR systems mentioned above. Experience/familiarity with the family of COMSEC devices and planner tools including but not limited to Automated Communications Engineering Software (ACES), Simple Key load (SKL), Tactical Key Loader (TKL), Next Generation Load Device-Small (NGLD-S).

Qualifications

• Must have an Active Secret Clearance
• Proficiency in Radio Waveforms, Software Defined radios (SDR) and COMSEC devices and planning tools
• Strong Troubleshooting and Technical Support skills with radios to identify and address system issues effectively
• Strong written and verbal communication skills for effective coordination and reporting
• 50% Travel
• Equivalent military experience in CMF 25 or MOS 18E
• CompTIA Security+ or Network+ preferred

SNI has teamed with a valued client in Denver on a search for a Manager of Security Engineering. The Manager of Security Engineering is going to be responsible for leading a team of 5 professionals. The Manager of Security Engineering will work in a hybrid role with one day being on-site.

Key Responsibilities and Qualifications:

* The Manager of Security Engineering must have experience with Microsoft Azure and AWS.

* The Manager of Security Engineering must have experience with Microsoft Intune and Windows Server Administration.

* The Manager of Security Engineering must have experience with Office 365.

* The Manager of Security Engineering must have experience with Cisco networking technologies.

* The Manager of Security Engineering will provide technical leadership for the infrastructure, cloud and security engineering teams.

* The Manager of Security Engineering will be responsible for designing and overseeing secure architecture.

* The Manager of Security Engineering will work in a hands-on role assisting with complex troubleshooting.

Compensation and Benefits:

The compensation for this position starts in the range of $110K. Insurance, and other benefit options that are offered include:

• Medical, Dental and Vision
• Disability Insurance
• Supplemental Life Insurance
• Health Savings Account (HSA)
• Fixed Indemnity Plans
• Voluntary Benefits