Engineering Jobs in California

Manufacturing Test Software Engineer

Salary: $125,000 – $150,000 + equity & benefits

Location: Mission District, San Francisco, CA

We’re looking for a self-motivated Manufacturing Test Software Engineer to join our R&D/Pilot test team in San Francisco. You’ll work closely with R&D and Operations to improve test systems, processes, and production readiness for LiDAR products.

Key Responsibilities

• Maintain, enhance, and deploy test systems and automation platforms
• Drive improvements in test efficiency, yield, and product quality
• Analyze root causes of failures and implement corrective actions using tools such as 8D, 5 Whys, and Fishbone analysis
• Support scalability and manufacturability projects
• Prepare technical documentation and train test operators

Required Skills & Experience

• Strong Python programming and debugging skills
• Experience with test automation in manufacturing environments
• Familiarity with source control tools (Git, Jira, etc.) and quality standards (SPC, GR&R, control charts)
• Experience with LiDAR, robotics, vision systems (Cognex/OpenCV), or test measurement equipment is a plus
• Bachelor’s degree in Computer Science, Engineering, or equivalent experience
• 10+ years supporting product tests in manufacturing

Red Oak Technologies is a leading provider of comprehensive resourcing solutions across a variety of industries and sectors including IT, Marketing, Finance, Business Operations, Manufacturing and Engineering.

Our client is an electronics manufacturer. They are looking for a Manufacturing Technician (Swing Shift) to join their team. This role is a CONTRACT position. Position will be ONSITE. Candidate must be able to commute onsite to San Francisco, CA.

**Swing Shift – 2:00 PM – 10:30 PM – Monday through Friday – Some work on Saturday as needed**

**Gated private parking lot available for contractors**

**$30/hr - $35/hr**

Position Requirements:

• Follow all Safety and Laser Safety procedures and requirements
• Be able to construct, test and calibrate engineering and production robotic and computer-controlled assembly systems using engineering prints, schematics, assembly instructions and engineering direction
• Knowledgeable in high precision measuring equipment, calibration, and detailed record generation

Experienced and Proficient in the following:

• Mechanical hand and power tools
• Oscilloscopes, DMM, Signal Generators, Optics, Cameras
• Laser safety, lasers, laser pattern recognition, beam focus, and active alignment
• Auto dispense and cure of UV adhesive
• Multiple axis, vision assisted, computer controlled robotic assembly equipment in both a R/D and Volume Manufacturing environment
• Identification of “Root” Cause of Manufacturing, Quality and Yield issues
• Microsoft Office, Standard SPC and Flowcharts packages
• Pneumatic actuated Slides, Grippers, etc.
• Hex Pod Tables, Active Alignment
• Excellent reading, writing, and communication skills in English
• Minimum of 5 years industry experience, Lidar Sensor experience preferred but not required
• Be able to stand for long periods of time
• Lift and carry 35 lbs

Red Oak Technologies is made up of people from a wide variety of backgrounds and lifestyles. We embrace diversity and invite applications from people of all walks of life. See what it’s like to be at the top; connect with one of our recruiters and apply today.

Red Oak Tech: Quality | Talent | Integrity

Note: Compensation rates are based on years of experience and/or level of skills relevant to the opportunity.

Who We Are

LaunchPoint Electric Propulsion Solutions, Inc. is an aerospace power generation and electric propulsion design company that is committed to hiring the very best people to join our team. We are passionately focused on designing and manufacturing the best motor and controller solutions for aerospace, thermal management, power generation, and defense. We specialize in gensets, motors and controllers to enable efficient, power dense, reliable, lightweight hybrid-electric and full-electric propulsion solutions.

Come join us in a rare opportunity to get in on the ground floor of a product destined to impact aerospace, defense and advanced air mobility.

Manufacturing New Product Introduction (NPI) Engineer II

LaunchPoint Electric Propulsion Solutions, Inc. is seeking an experienced Manufacturing NPI Engineer II to introduce and develop innovative products, highly efficient processes/procedures, and tooling to help streamline operations.

What You’ll Do

• Introduce new products and manufacturing processes
• Technical manufacturing development and integration for production
• Quickly solve problems related to production optimization and/or quality
• Break down technical problems, risks and opportunities in the right order to develop and optimize production processes
• Production planning and process validation
• Create the technical conditions for zero-defect production
• Create positive team and mentoring relationships with internal and external stakeholders and employees
• Continuously improve production processes by developing, qualifying and implementing lean initiatives
• Identify risks and opportunities in the production process and take action for continuous improvement

What You Need

• BS in Industrial Engineering, Mechanical Engineering, Manufacturing Engineering or related discipline
• Proven expertise in production design and production support in a Manufacturing or Industrial Engineering capacity, preferably in aerospace or defense
• Ability to both communicate and document technical information and processes internally and externally
• 2+ years of professional experience in the field of manufacturing engineering, preferably in the aerospace or defense industry and experience with one or more of the following:
• conformal coating and encapsulating electronics assemblies
• molding processes including tooling design
• composite part manufacture including tooling design
• electrical wiring harnesses and cabling manufacture
• Proficient with MS Office
• Structured, analytical and independent way of working
• In-depth understanding and working knowledge of AS9100D Quality Management System or similar tightly regulated industry

Bonus Qualifications

• SOLIDWORKS Experience
• Industry experience in Aerospace or Defense
• Knowledge of 3D CAD, mechanical FEA simulation tools
• Knowledge of electronics packaging best principles and practices
• CNC and Manual Machining experience - making your own parts
• Geometric Dimensioning and Tolerancing (GD&T)

Physical Requirements

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this Job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include color, distance, and close vision.

Work Environment

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is frequently exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate.

Salary and Pay Transparency

Salary range for this position is between $75,000 and $111,000. Base pay is dependent upon many factors, such as: training, transferable skills, work experience, education, business needs and market demands. The base pay range is subject to change and may be modified in the future. This role may also be eligible for bonus, equity, and all applicable company benefits.

The salary range and/or hourly pay rate listed is a good faith determination of potential base compensation that may be offered to a successful applicant for this position at the time of this job posting and may be modified in the future.

Benefits

We value our employees’ time and efforts. Our commitment to your success is enhanced by our competitive compensation and an extensive benefits package including paid time off, medical, dental and vision benefits and future growth opportunities within the company. Plus, we work to maintain the best possible environment.

LaunchPoint is proud to be an Equal Opportunity employer committed to diversity and inclusivity in the workplace. All aspects of employment are decided on the base of merit, qualifications, and business needs. We do not discriminate based upon race, color, religion, sex, sexual orientation, age, national origin, disability status, protected veteran status, gender identity or any other characteristic protected by federal, state or local laws.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Are you an experienced Grind Operator with strong centreless grinding capability in a precision manufacturing environment? Do you want to work on safety critical components where quality and consistency are essential? Are you looking for long term stability and development in a growing aerospace business? If so, this opportunity may be the right next step for you.

This business is a leading aerospace fastener manufacturer supporting highly demanding applications. With fully vertically integrated operations including forging, heat treatment, machining, centreless grinding, thread rolling, NDT and mechanical testing, the operation is built around quality, accountability and continuous improvement.

The purpose of this role is to produce high quality aerospace components using centreless grinding processes, ensuring all parts meet drawing and specification requirements while maintaining safe working practices.

As the Grind Operator your responsibilities will include

• Producing parts using centreless grinding methods that meet drawing and specification requirements
• Verifying machine settings prior to operation
• Following customer and internal work instructions accurately
• Performing basic machine maintenance in line with PM schedules
• Troubleshooting tooling or equipment issues and maintaining shop floor standards

As the Grind Operator you will bring

• Ability to read and interpret engineering drawings
• Strong shop maths skills and basic computer literacy
• Three to five years or more of centreless grinding experience
• Experience using inspection equipment including micrometers and calipers
• Background working with manual OM grinders, camout machines or CNC grinders

You will join a business with a positive and supportive culture where people are encouraged to develop and grow. Competitive pay is offered alongside clear long term career opportunity, making this an environment where commitment and skill are genuinely valued.

This role requires the ability to stand for extended periods and lift up to 30 lbs in line with EHS policies, with flexibility to work overtime when required.

All successful applicants will be contacted within two working days.

Located in Thousand Oaks, California, 20BLOC is a small privately held development-stage biopharmaceutical company, driven by a mission to create breakthrough protein-based drugs to save lives. Our lead product is an innovative solution to provide oxygen to tissues. Check us out at

We are looking for a motivated and hands-on Head of Manufacturing to join our team.

How you will add value to 20BLOC

The Head of Manufacturing will lead our manufacturing and MSAT teams as we transition from pre-clinical manufacturing and move into our newly built cGMP production facility. This role is responsible for the management and day-to-day oversight of our manufacturing and MSAT functions and will provide strategic direction to the business as we continue to scale and plan for future production needs. The Head of Manufacturing works closely with quality, supply chain, R&D, and other cross-functional teams to ensure product quality, data integrity, and regulatory compliance.

Key Responsibilities

Manufacturing and MSAT Leadership

• Lead Production and MSAT as tightly integrated functions, owning day-to-day manufacturing execution and technical decision-making as the company transitions from pre-clinical operations into a new cGMP manufacturing facility
• Own day-to-day execution of manufacturing operations ensuring safe, compliant, and reliable batch execution
• Establish clear accountability for process ownership including yield, throughput, deviations, and continuous improvement

cGMP Facility and Scale-Up

• Lead manufacturing readiness activities for the new facility including operational readiness, staffing, training, and go-live execution
• Work hands-on with Engineering, Facilities, Quality, and 3rd parties to support equipment qualification and manufacturing area readiness
• Develop manufacturing strategies to support early and late-stage clinical as well as commercial manufacturing for future production and capacity expansion

MSAT & Process Ownership

• Oversee MSAT responsibilities including process characterization, tech transfer, and process validation
• Hold the MSAT team to a high bar for scientific and engineering excellence, ensuring process decisions are grounded in robust data and mechanistic understanding
• Drive data-driven process improvements under manufacturing and analytical data to improve robustness and consistency

People, Strategy, and Organizational Development

• Build, mentor, and develop a high-performing Manufacturing and MSAT team capable of operating in a fast-moving startup environment
• Establish and implement lightweight manufacturing organizational structures, workflows, and standard practices appropriate for a growing GMP operation
• Provide clear technical and operational input to leadership on manufacturing risks, timelines, and scale-up strategy

Education

• Bachelor’s degree in Biochemical Engineering, Chemical Engineering, Chemistry, or a closely related technical discipline required
• Advanced degree (M.S. or Ph.D.) in a related field preferred

Experience

• 8 years+ of experience in GMP manufacturing, MSAT, process engineering, or technical operations within biotech, biopharma, or related regulated manufacturing environments
• Demonstrated experience leading or directly supporting GMP manufacturing operations including hands-on involvement
• Prior experience supporting or leading startup activities in new facilities or new manufacturing suites
• Experience managing and developing small, highly technical teams, preferably in a startup environment
• Experience in early-stage or clinical manufacturing environments (pre-IND through Phase II) strongly preferred

Skills & Competencies

• Strong engineering or related technical foundation, with the ability to reason from first principles about process behavior, risk, and variability
• Hands-on GMP manufacturing expertise, including deviation investigation, root-cause analysis, and process troubleshooting on the production floor
• Data driven decision making, using experimental design and trend analysis of manufacturing data to improve robustness and consistency
• Ability to translate experimental processes into manufacturable GMP operations, balancing rigor, speed, and fit-for-stage execution
• Clear technical and organizational communicator and cross functional collaborator. Able to align operations, engineers, scientists, and leadership around sound technical decisions

Please apply at – in subject line: Head of Manufacturing

This is a full-time, on-site position located in Thousand Oaks, California, and requires working on-site Monday through Friday.All applicants must be authorized to work in the United States. We are not sponsoring employment visas.

Compensation: The salary range for this position is $130,000.00. to $180,000.00 USD annually. This salary range is an estimate, and the actual salary may vary based on various factors, including, without limitation, individual education, experience, tenure, skills, and abilities, as well as internal equity and alignment with market data, including potential adjustments for geographic location.

20BLOC is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status, or other applicable legally protected characteristics.

We offer competitive compensation and benefits including health, dental, vision and life insurance, 401(k) and paid time off.

Job Description

Sanmina Corporation (Nasdaq: SANM) is a leading integrated manufacturing solutions provider serving the fastest-growing segments of the global Electronics Manufacturing Services (EMS) market. Recognized as a technology leader, Sanmina Corporation provides end-to-end manufacturing solutions, delivering superior quality and support to Original Equipment Manufacturers (OEMs) primarily in the communications networks, defense and aerospace, industrial and semiconductor systems, medical, multimedia, computing and storage, automotive and clean technology sectors. Sanmina Corporation has facilities strategically located in key regions throughout the world.

The Sanmina Fremont facility is a full-service enclosure systems solution manufacturing plant. Located in California’s Silicon Valley, this facility produces low-to-mid volume New Product Introduction (NPI) runs to full-scale volume. The Fremont facility offers everything from small piece parts to fully integrated and tested systems. In addition, this location offers in-house painting capabilities and flexible logistics solutions in distribution, inventory management and hubbing, as well as repair services.

Job Purpose- The Production Manager is responsible for the direct management of all manufacturing and production activities for complex fabricated sheet metal, tubular frames, final assembly & test of a variety technical components & products. This role focuses on optimizing shop floor processes, ensuring product quality, meeting production schedules, and maintaining a safe working environment, directly supporting the strategic goals set by the Plant Manager.

Key Responsibilities

Production & Efficiency Management

• Oversee the daily execution of production schedules across multiple departments (e.g., sheet metal fabrication, welding, powder coat painting, final assembly, testing) to ensure on-time delivery (OTD) targets are met.
• Drive the implementation and application of Lean Manufacturing principles and Continuous Improvement initiatives (e.g., 5S, Standard Work, Waste Reduction) to enhance operational efficiency and reduce manufacturing cycle time.
• Monitor key operational metrics, including Overall Equipment Effectiveness (OEE), scrap rate, and labor utilization, taking corrective action as necessary.
• Coordinate with the Engineering department to manage the introduction of new products (NPI) smoothly into production and resolve complex manufacturing issues.

Quality and Safety

• Champion a rigorous Safety (HSE) program on the shop floor, ensuring all employees adhere to strict safety protocols and environmental compliance standards.
• Work closely with the Quality team to maintain high product quality, ensure compliance with the ISO 9001 standard, and manage in-process quality control gates.
• Lead and support teams in performing Root Cause Analysis (RCA) for production defects and implementing sustainable corrective and preventive actions (CAPA).

Team and Resource Management

• Directly supervise Production Supervisors, leading, mentoring, and developing the manufacturing workforce.
• Manage labor planning, scheduling, and capacity requirements to match demand fluctuations.
• Collaborate with Materials Planning, Purchasing and Logistics teams to optimize inventory levels and ensure the timely flow of components to the production line.

Qualifications

Education: Bachelor's degree in Industrial Engineering, Manufacturing Engineering, Operations Management, or a related technical field.

Experience: Minimum of 7+ years of experience in a manufacturing environment, with at least 3 years in a management or senior supervisory role overseeing production operations.

Industry Knowledge: Hands-on experience in the heavy electrical equipment or similar industrial manufacturing sector is highly preferred as is familiarity with processes for MV products (e.g. electrical assembly, insulation processes).

Technical Skills:

• Proven expertise in Lean Manufacturing and Continuous Improvement methodologies.
• Strong working knowledge of manufacturing ERP/MRP systems and production scheduling tools.

Leadership: Exceptional problem-solving skills, decisiveness, and proven ability to manage and motivate a large, diverse manufacturing workforce in a fast-paced environment.

This is an ITAR facility and applicant must be a US Citizen or a lawful permanent resident.

Sanmina is an Equal Opportunity Employer – M/F/Veteran/Disability/Sexual Orientation/Gender Identity

Job Title: 1st Shift Manufacturing Supervisor

Company: ClearPath Medical

Location: Tustin, CA

Employment Type: Full-time

Salary: $21–$27/year (DOE)

Shift Schedule & Coverage Expectations

This role provides leadership coverage for first-shift manufacturing operations and requires flexibility to support business needs while maintaining a sustainable schedule.

·       Standard Schedule:

Monday through Friday, 5:20 AM – 1:50 PM

·       Weekday Overtime Coverage:

As needed, the shift may start as early as 3:30 AM to support production continuity, issue resolution, or staffing needs

·       Saturday Overtime Coverage:

Eight-hour shift every other Saturday, scheduled in advance to support production demands

ClearPath Medical values consistency and planning. Overtime is managed thoughtfully and communicated in advance whenever possible.

About ClearPath Medical

ClearPath Medical manufactures custom medical cable assemblies used in critical healthcare applications. Our products must meet strict regulatory, quality, and traceability requirements. We take pride in building products the right way, where compliance, documentation, and patient safety are just as important as throughput.

The Role

The 1st Shift Manufacturing Supervisor is responsible for leading production operations, balancing quality, compliance, and people leadership. This role requires the ability to work independently, make sound decisions, and resolve issues in real time, while ensuring all processes align with medical manufacturing standards.

This supervisor sets the tone for the shift by maintaining a calm, respectful, and accountable work environment, ensuring work is completed safely, accurately, and in compliance with all procedures.

Key Responsibilities

·       Lead and support first-shift production teams to meet daily production goals while maintaining compliance with quality and regulatory requirements

·       Ensure strict adherence to documented procedures, work instructions, and traceability requirements

·       Monitor production flow and material availability, addressing issues proactively and escalating appropriately when needed

·       Troubleshoot equipment, process, and personnel issues using sound judgment and root-cause thinking

·       Review and ensure accuracy of production documentation, travelers, and quality records

·       Maintain a strong focus on safety, cleanliness, and organization across the production floor

·       Communicate clearly with the second shift, engineering, quality, and materials to ensure continuity and issue resolution

·       Provide clear shift handoff reports that accurately reflect production status, issues, and follow-ups

·       Coach and develop operators through consistent expectations, feedback, and support

·       Address performance or conduct issues respectfully, firmly, and in alignment with company values

What We’re Looking For

·       5+ years of manufacturing experience, with at least 2 years in a supervisory or lead role

·       Experience in regulated manufacturing environments (medical device experience strongly preferred)

·       Strong understanding of quality systems, documentation requirements, and process discipline

·       Ability to work independently and make sound decisions without constant oversight

·       Proven ability to troubleshoot problems thoughtfully rather than react impulsively

·       Leadership style that balances accountability with respect and professionalism

·       Clear, direct communicator who can set expectations and follow through consistently

·       Comfortable using ERP/MRP systems and basic production reporting tools

·       Availability to work 1st shift consistently, with flexibility for frequent overtime

What Success Looks Like in This Role

·       Production goals are met without compromising quality or compliance

·       Documentation and traceability are accurate, complete, and audit-ready

·       Issues are identified early and resolved effectively using sound judgment

·       The team feels supported, respected, and clear on expectations

·       The shift operates smoothly, safely, and with minimal escalation

What We Offer

• $21 – $27 hourly rate based on real results and experience
• Full benefits (health, dental, PTO)
• The autonomy to run your shift as you own it, as long as the numbers and quality are perfect

ClearPath Medical is an Equal Opportunity Employer.

No phone calls, no recruiters.

Job description:

Company Overview

Calnetix Technologies, LLC is dedicated to transforming the energy landscape by developing innovative, high-speed motor generator technologies that promote energy efficiency and environmental sustainability. We partner with Original Equipment Manufacturers (OEMs) across diverse industries to enhance existing products and pioneer new markets through cutting-edge solutions.

Overview

We are seeking a Manufacturing Product Engineer with background in Manufacturing to oversee the development, manufacturing and lifecycle management of mechanical components for a key client. This role will interface between internal teams, vendors and the client. You will manage product deliveries, scheduling and technical changes as needed.

The ideal candidate has a strong mechanical engineering background, hands-on manufacturing experience and experience managing mechanical products from concept to production.

Duties

• Own and manage assigned mechanical component products throughout their lifecycle, from development through production and delivery
• Coordinate with internal engineering, manufacturing, and quality teams to ensure product requirements are met
• Manage external vendors and suppliers, including sourcing, technical alignment, timelines, and performance
• Develop and maintain project schedules, production timelines, and delivery plans
• Act as the primary point of contact for the customer, managing expectations, requirements, and ongoing communication
• Ensure products meet cost, quality, and performance targets
• Identify and mitigate technical, schedule, and supply chain risks
• Support design reviews, manufacturing readiness, and continuous improvement initiatives
• Track progress and report status to internal stakeholders and the client

Requirements

• Bachelor’s degree in Mechanical Engineering or a related field
• Minimum of 3 years of experience in mechanical product management, manufacturing engineering, or a similar role
• Strong background in mechanical systems, with experience in motors, stators, magnetic bearings, or related electromechanical components preferred
• Hands-on experience in a manufacturing environment
• Proven experience working with suppliers and contract manufacturers
• Strong project management skills, including scheduling and timeline management
• Some proficiency in Solidworks is a plus
• Use of MS Office tools for productivity and Project scheduling is necessary

Position Summary:

Who we are: AGSE is a recognized leader in the design and manufacture of aerospace ground support equipment, serving the world’s top aerospace organizations. We are in the midst of a cultural transformation, moving from tribal knowledge and manual reactive processes to a data-driven, standardized, and continuously improving operation. This is your chance to join a team that is committed to real change, not just “checking the box” on Lean.

What You’ll Do: You will be an active partner in driving our transformation—building systems, not just projects. Your focus will be on embedding continuous improvement as a mindset at every level, not just as a set of tools. Your day-to-day will combine process analysis, hands-on problem solving, cross-functional coaching, and project execution, with a direct line to senior leadership.

You won’t just analyze; you’ll implement, teach, and sustain.

Responsibilities: Essential Duties:

· Lead Improvement Projects: Identify, plan, and execute high-impact Lean, Six Sigma, and digital transformation projects focused on operational bottlenecks (quality escapes, long prep times, inefficient assembly, etc.).

· Drive Standardization: Document tribal knowledge into robust SOPs and work instructions; pilot and roll out digital work instruction tools and visual management boards.

· Coach & Train: Deliver hands-on Lean/CI training for operators, leads, and supervisors, focusing on practical skills (problem solving, process mapping, visual management, mistake-proofing, etc.).

· Data-Driven Action: Design meaningful KPIs, collect and analyze shopfloor data (scrap, rework, cycle times, downtime, OTD, etc.), and implement root cause analysis and countermeasures.

· Champion Digital Tools: Work with AI, automation, and analytics tools (Power Automate, ERP integrations, Excel, Power BI) to move the factory toward a paperless, digitally enabled environment.

· Facilitate Change: Run kaizen events, lead daily/weekly Gemba walks, facilitate feedback loops, and support the development of a true continuous improvement culture.

· Collaborate Across Functions: Partner with Quality, Engineering, Production, and Supply Chain to drive cross-functional initiatives and standardize processes.

· Tackle Real Problems: Address recurring issues like final inspection escapes, part marking accuracy, FOD/scratches, material flow, and inefficiencies in manual-heavy processes.

· Measure and Report Savings: Continuous improvement impacts in terms of dollars saved, hours reduced, and risk mitigated; report out to leadership and stakeholders.

Work Location: Santa Fe Springs, CA. 100% Onsite work. No remote nor hybrid availability for this role.

Expertise: Knowledge & Skills:

· 3+ years of hands-on experience in a Lean/Continuous Improvement, manufacturing, or operations engineering role.

· Strong working knowledge of Lean Manufacturing (5S, Value Stream Mapping, SMED, Poka-Yoke, Visual Management), Six Sigma (DMAIC, root cause analysis), and process mapping.

· Track record of driving real improvements, measurable cost savings, cycle time reductions, quality improvements.

· Experience creating and implementing Standard Work, SOPs, and operator-level training.

· Familiarity or experience with digital tools for shop floor (Power BI, Excel, Power Automate, digital checklists, etc.).

· Excellent communication, coaching, and facilitation skills; able to work at all levels from shop floor to leadership.

· Highly self-motivated, able to work with minimal supervision, and thrives in a dynamic, hands-on environment.

· Certification in Lean, Six Sigma (Green/Black Belt), or equivalent experience is highly preferred.

Nice to Have

· Experience supporting or leading ERP transitions (Epicor, Global Shop, etc.).

· Exposure to AI, automation, or advanced manufacturing technologies.

· Background in aerospace, heavy fabrication, or complex assembly environments.

· Experience implementing digital work instruction systems or MES.

· Knowledge of ISO 9001/AS9100 QMS requirements.

Required:

· Bachelor’s degree in: Bachelor’s degree in Industrial, Manufacturing, Mechanical Engineering or related technical field.

· Manufacturing engineering experience a must

· Six Sigma Black Belt, Lean, Quality, or other related certification preferred.

· Onsite role. No hybrid nor remote work available for this role

· Ability to work non-standard schedule as needed.

Physical Demands:

While performing the duties of this job, the employee is regularly required to sit and talk or listen. The employee frequently is required to use hands to handle or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds.

Work Environment:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.

• Noise Intensity: Moderate
• Occasionally: Office environment, Production/manufacturing environment, Warehouse environment

Pay Range: $90,000 - $120,000 plus a discretionary bonus.

While a Company bonus is not guaranteed, this position’s maximum bonus percentage range can be up to 10% of base salary.

Company bonuses are not guaranteed and are based on your performance, the department’s performance and/or the Company’s financial results.

AGSE is required by law in certain jurisdictions to include a pay scale in the job posting for this position. "Pay scale" means the salary or hourly range that AGSE reasonably expects to pay for this position; it is neither a promise nor a guarantee of the compensation that the successful candidate will receive. The pay scale for this position considers the wide range of factors that AGSE considers in making compensation decisions, including, without limitation: skill set, experience, and training, licensure and certifications, and other business and organizational needs. Please note that it is not typical for AGSE employees to be at or near the top of the pay scale for their role - especially as a new hire - and compensation decisions are dependent on the facts and circumstances of each case.

Job Type: Full-time

Pay: $90,000.00 - $120,000.00 per year

Benefits:

• 401(k)
• 401(k) matching
• Dental insurance
• Health insurance
• Life insurance
• Paid time off
• Referral program
• Tuition reimbursement
• Vision insurance

Work Location: In person

Job Title: 2nd Shift Manufacturing Supervisor

Company: ClearPath Medical

Location: Tustin, CA

Employment Type: Full-time

Salary: $21–$27/hr (DOE)

Shift Schedule & Coverage Expectations

This role provides leadership coverage for second-shift manufacturing operations and requires flexibility to support business needs while maintaining a sustainable schedule.

·       Standard Schedule:

Monday through Friday, 2:00 PM – 10:30 PM

·       Weekday Overtime Coverage:

As needed, the shift may extend up to 12:20 AM to support production continuity, issue resolution, or staffing needs

·       Saturday Overtime Coverage:

Eight-hour shift every other Saturday, scheduled in advance to support production demands

ClearPath Medical values consistency and planning. Overtime is managed thoughtfully and communicated in advance whenever possible.

About ClearPath Medical

ClearPath Medical manufactures custom medical cable assemblies used in critical healthcare applications. Our products must meet strict regulatory, quality, and traceability requirements. We take pride in building products the right way, where compliance, documentation, and patient safety are just as important as throughput.

The Role

The 2nd Shift Manufacturing Supervisor is responsible for leading evening production operations with a strong balance of quality, compliance, and people leadership. This role requires the ability to work independently, make sound decisions, and resolve issues in real time, while ensuring all processes align with medical manufacturing standards.

This supervisor sets the tone for the shift by maintaining a calm, respectful, and accountable work environment, ensuring work is completed safely, accurately, and in compliance with all procedures.

Key Responsibilities

·       Lead and support second-shift production teams to meet daily production goals while maintaining compliance with quality and regulatory requirements

·       Ensure strict adherence to documented procedures, work instructions, and traceability requirements

·       Monitor production flow and material availability, addressing issues proactively and escalating appropriately when needed

·       Troubleshoot equipment, process, and personnel issues using sound judgment and root-cause thinking

·       Review and ensure accuracy of production documentation, travelers, and quality records

·       Maintain a strong focus on safety, cleanliness, and organization across the production floor

·       Communicate clearly with the first shift, engineering, quality, and materials to ensure continuity and issue resolution

·       Provide clear shift handoff reports that accurately reflect production status, issues, and follow-ups

·       Coach and develop operators through consistent expectations, feedback, and support

·       Address performance or conduct issues respectfully, firmly, and in alignment with company values

What We’re Looking For

·       5+ years of manufacturing experience, with at least 2 years in a supervisory or lead role

·       Experience in regulated manufacturing environments (medical device experience strongly preferred)

·       Strong understanding of quality systems, documentation requirements, and process discipline

·       Ability to work independently and make sound decisions without constant oversight

·       Proven ability to troubleshoot problems thoughtfully rather than react impulsively

·       Leadership style that balances accountability with respect and professionalism

·       Clear, direct communicator who can set expectations and follow through consistently

·       Comfortable using ERP/MRP systems and basic production reporting tools

·       Availability to work 2nd shift consistently, with flexibility for occasional overtime

What Success Looks Like in This Role

·       Production goals are met without compromising quality or compliance

·       Documentation and traceability are accurate, complete, and audit-ready

·       Issues are identified early and resolved effectively using sound judgment

·       The team feels supported, respected, and clear on expectations

·       The shift operates smoothly, safely, and with minimal escalation

What We Offer

• $21 – $27/hr based on real results and experience
• Full benefits (health, dental, PTO)
• The autonomy to run your shift as you own it, as long as the numbers and quality are perfect

ClearPath Medical is an Equal Opportunity Employer.

No phone calls, no recruiters.