Engineering Jobs in Beverly Burlington County Nj Remote
181 positions found
You will serve as a WELDER LEADER (EXPERT) in the DEPARTMENT OF NAVY to include work sites of Portsmouth Naval Shipyard, Puget Sound Naval Shipyard, Norfolk Naval Shipyard, and Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility.
This position is located in the Structural Shop (Shop 26).
Applicants will only be considered for positions within their own UIC. For example: If you are within UIC 4523A, you will only be considered for positions within 4523A.
Duties
Help
- You will perform reviews of documents associated with completed work and trade processes.
- You will keep shop personnel apprised of new technologies, procedures, and tooling improvements associated, approved, and adopted for welding work.
- You will provide process improvements and work with engineering to reduce cost and improve the overall efficiency of the welding and non-destructive test program.
- You will inspect completed and in process work for quality of workmanship and adherence to requirements, specifications, standards, plans and schedules.
- You will train and mentor less skilled employees, demonstrate proper work methods, and discuss viable alternatives and considerations.
- You will serve as an Expert Welder leading a group to ensure work assignments are completed.
Requirements
Help
Conditions of employment
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- This is a bargaining unit position.
- You will be required to successfully complete a pre-appointment physical examination.
- This position requires the ability to lift and carry items weighing 50 pounds.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- You will be required to wear personal protective equipment such as helmets, gloves, coveralls, glasses, goggles, respirators and safety shoes continuously for the duration of the work shift.
- Work is performed in areas where potentially harmful physical and chemical agents are present (e.g. fumes, dust, heat, ionizing and non-ionizing radiation and chemicals). You will be required to participate in medical surveillance programs.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
- This position requires the ability to climb vertical ladders when working aboard ships and submarines, and occasional work from ladders, platforms and staging areas.
- This position may be subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.
- This position requires rotating shift work.
- Must hold two common welding qualifications in either SMAW, GTAW, GMAW, Flame Spray, Sub Arc, Hull Cuts, Robotic, etc.
- Must maintain visual inspection qualifications per VT-271.
Qualifications
Although a specific length of time and experience is not required for most trade and labor occupations, you must show through experience and training that you possess the quality level of knowledge and skill necessary to perform the duties of the position at the level for which you are applying. Qualification requirements emphasis is on quality of experience, not necessarily the length of time.
Your qualifications will be evaluated on the basis of your level of knowledge, skills, abilities and/or competencies in the job elements and screen out listed below.
This job has a screen-out element which will be used to determine minimum eligibility for this job. Applicants who do not receive a minimum of two points on the screen-out element(s) will be found ineligible. The Screen-out Element for this position is: ABILITY TO LEAD OR SUPERVISE.
Applicants must meet the requirements of the Office of Personnel Management (OPM) Job Qualification Handbook for Trades and Labor Occupations. Additional qualification information can be found at: url=List-of-Approved-Job-Elements
Education
This job does not have an education qualification requirement.
Additional information
Salary is based on geographical location and is subject to change with the annual local wage surveys in accordance with the provisions of 5 CFR Part 532 for all employees whose official duty station is located within the geographic boundary of the wage area definition. For more information please visit: :
Puget Sound Naval Shipyard:
WA: ,Washington.pdf
CA: ,California.pdf
Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility: Naval Shipyard:
ME: : Naval Shipyard:
VA: : position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.
Temporary actions taken under this announcement may be made permanent without further competition.
Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.
Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.
Applicants rated ineligible on this vacancy announcement need to reapply and update their application package to be considered on future vacancies filled through this announcement.
A relocation incentive may be authorized.
A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee.
Applicants selected and hired through this vacancy announcement need to reapply to be considered on future vacancies filled through this announcement.
Referral lists will be issued on an as-needed basis as vacancies occur.
All eligibility and qualifications must be met by the referral cut-off date.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
Expand Hide additional information
Candidates should be committed to improving the efficiency of the Federal government, passionate about the ideals of our American republic, and committed to upholding the rule of law and the United States Constitution.
Benefits
Help
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.
Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSMinimum of an Associates of Applied Sciences Degree in related field of medical electronics, electronic technology or equivalent military or related training required. CBET certification preferred.
Three to five years experience or equivalent, performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
Provides Planned Maintenance (PM), safety testing, repairs, calibration, installation, routine and emergency service to general and various specialized diagnostic and therapeutic medical equipment, as assigned by the Clinical Engineering (CE) Manager.
ESSENTIAL FUNCTIONS
Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.
Performs PM procedures on multiple types of general and specialized clinical equipment.
Performs PM procedures using manufacturer’s recommendations, standards or code requirements, as well as industry acceptable processes as guidelines.
Performs corrective maintenance procedures including diagnosing problems using thermodynamic, electronic/electrical, mechanical, pneumatic, hydraulic, and/or other sciences and documents results of activities performed to comply with all regulatory and standard requirements.
Notifies equipment users, CE Managers, and Regional Director of repair status and delays as necessary.
Interacts with clinical staff to understand and resolve operational problems in scheduling and completing PM procedures while minimizing interference to hospital departments.
Determines need for replacement parts and supplies, selects the most cost effective source, and submits properly completed parts request using established policies and guidelines.
Completes corrective and planned maintenance work order documentation per policy.
Promotes teamwork by keeping others informed, participating effectively in group decision making, works to accomplish team objectives and projects, and solicits feedback about one's effectiveness as a team member.
Continually improves processes by seeking ways to eliminate and reduce waste.
Has authority (based on department guidelines) to order parts and supplies required for emergency service or repair of medical equipment. Recommends test equipment and spare equipment parts to the CE Manager or Lead Technician.
Provides on-call service coverage after normal business hours on a rotating basis, as assigned.
Provides assistance and training to Bio-Medical Equipment Technician I as assigned by Clinical Engineering Management.
May be assigned duties as Lead Bio-Medical Equipment Technician, as needed.
Performs other duties as assigned or requested by the CE Manager.
Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.
MINIMUM QUALIFICATIONSAssociates of Applied Sciences degree in medical electronics, electronic technology or related field, including comparable military training or an equivalent combination of education and experience. CBET certification preferred.
Three (3) to five (5) years' experience performing corrective and planned maintenance on medical devices and/or clinical support equipment.
Must have a basic understanding of anatomy, physiology, and medical terminology.
Working knowledge and ability to use basic hand tools and test equipment specific to the field. Ability to train CE associates on use and application of select test equipment.
Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, CAHO, EOC, FDA and other specific regulations and standards pertaining to clinical equipment service and repair.
Must possess a personal presence that is characterized by a sense of honesty, integrity and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals and values of Trinity Health, Ministry Organizations, and Clinical Engineering.
Ability to operate complex test equipment, analyze and interpret information provided by equipment and clinical staff to determine equipment operational condition.
Must have basic understanding of personal computer operation, applications, and ability to input data using keyboard. Technician must be able to follow complex written instructions, perform tasks and document actions taken.
Strong customer service communications skills are required to interact with hospital personnel and vendors to achieve positive outcomes. .
Ability to provide or coordinate in-service training to clinical/professional staff on medical device operations and safety functions.
PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONSMust be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.
Possess ability to mentally concentrate while being subject to stress, interruptions and changing work priorities.
Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices.
Must be able to hear speech, distinguish sounds, and speak.
Must have near vision, far vision, depth perception, and be able to distinguish colors.
Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.
Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.
Must be able to push or pull over 100 pounds frequently (20% of the time).
Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to job duties.
Must be able to adapt to frequently changing work priorities.
Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.
Our Commitment
Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance
Security Clearance Type:
Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. The Hardware in the Loop (HWIL) Department in Tucson, AZ is a multi-discipline organization responsible for designing, building and integrating state of the art testing environments (flight simulators for missiles), as the last step before flight test. On our team, you will work with weapon system designers to understand requirements, design solutions, integrate, and deploy the systems to help support tactical software development, testing, and delivery for missiles to the warfighter.
Collaborate in a multi-disciplinary team to develop software to control Hardware-In-the-Loop (HWIL) facilities (flight simulators for missiles).
Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition. Ensures hardware and software standards are met.
Designs and implements build procedures that are used to support hardware and software product development and use.
Software design, coding and integration in a real-time environment.
May train software developers in the use of configuration management tools and the implementation of software quality standards. Typically requires a Bachelor's degree in Computer Science, Engineering or other STEM related field and a minimum of 5 years of relevant experience.
Experience with software development in C++, using the object-oriented features.
Embedded Software, Embedded Software Security, Embedded Operating Systems (Linux, RTOS, VxWorks, etc), Software Architecture Design and Implementation.
S. government issued security clearance is required prior to start date with the ability to obtain program access after start.
Strong organization, coordination, planning, teaming skills, as well as written and oral communication skills.
Experience with RF theory and application in systems.
Experience with electronics design and/or conducting data analysis using tools such as Matlab.
Experience troubleshooting systems using test equipment such as oscilloscopes, logic analyzers, network analyzers, and/or spectrum analyzers.
Knowledge of networking and IP addressed based equipment.
Experience with both Windows and Linux operating systems.
Agile and Scrum team member experience
Knowledge of or experience with software languages such as Java, C, C++, or similar languages; scripting languages such as Python and/or Perl, and MATLAB scripts for data analysis purposes.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Offered Based On Eligibility
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.
Virtual Fly Over City of Tucson & Community, YouTube Video Links
"As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
S. government issued security clearance is required prior to start date. S. citizens are eligible for a security clearance
Security Clearance Type:
Security Clearance Status:
Ability to obtain INTERIM U.S. government issued security clearance is required prior to start date
At Raytheon, the foundation of everything we do is rooted in our values and a higher calling - to help our nation and allies defend freedoms and deter aggression. The Hardware in the Loop (HWIL) Department in Tucson, AZ is a multi-discipline organization responsible for designing, building and integrating state of the art testing environments (flight simulators for missiles), as the last step before flight test. On our team, you will work with weapon system designers to understand requirements, design solutions, integrate, and deploy the systems to help support tactical software development, testing, and delivery for missiles to the warfighter.
Collaborate in a multi-disciplinary team to develop software to control Hardware-In-the-Loop (HWIL) facilities (flight simulators for missiles).
Determines end user needs by analyzing system capabilities to resolve problems on program intent, output requirements and input data acquisition. Ensures hardware and software standards are met.
Designs and implements build procedures that are used to support hardware and software product development and use.
Software design, coding and integration in a real-time environment.
May train software developers in the use of configuration management tools and the implementation of software quality standards. Typically requires a Bachelor's degree in Computer Science, Engineering or other STEM related field and a minimum of 5 years of relevant experience.
Experience with software development in C++, using the object-oriented features.
Embedded Software, Embedded Software Security, Embedded Operating Systems (Linux, RTOS, VxWorks, etc), Software Architecture Design and Implementation.
S. government issued security clearance is required prior to start date with the ability to obtain program access after start.
Strong organization, coordination, planning, teaming skills, as well as written and oral communication skills.
Experience with RF theory and application in systems.
Experience with electronics design and/or conducting data analysis using tools such as Matlab.
Experience troubleshooting systems using test equipment such as oscilloscopes, logic analyzers, network analyzers, and/or spectrum analyzers.
Knowledge of networking and IP addressed based equipment.
Experience with both Windows and Linux operating systems.
Agile and Scrum team member experience
Knowledge of or experience with software languages such as Java, C, C++, or similar languages; scripting languages such as Python and/or Perl, and MATLAB scripts for data analysis purposes.
Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. Relocation Offered Based On Eligibility
Clearance Information: This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS) , an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:
~ Tucson is known for its bright blue skies, and with more than 310 sunny days per year, Tucson's fantastic weather lets residents enjoy the outdoors year-round.
Virtual Fly Over City of Tucson & Community, YouTube Video Links
"As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Remote working/work at home options are available for this role.
*EOE Statement:*
A&C is an Equal Opportunity Employer. All qualified applicants will be considered for employment without regard to race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law.
Founded in 2000, A&C is a multi-discipline design firm providing quality services that are responsive to the needs of the client. A&C’s culture promotes creativity and collaboration amongst disciplines and employees fostering the best designs for clients.
*Description: *
Aubertine and Currier provides quality architectural, engineering, and surveying services through innovative and efficient design, highly responsive service, and lasting relationships in order to create a positive impact in the communities we serve.
A&C is seeking a *Licensed Civil Engineer* to join our Civil Engineering Department at our office located in Watertown, NY.
The successful candidate will work with our Civil Engineering team working on designs related to land planning, site, roadway, and utility infrastructure design. Being a relatively smaller design firm, this position will also include such duties as construction inspection, AutoCAD drafting, project design, preliminary design markups, design calculations, report preparation, client meetings and board meeting presentations. Within this position you will work managing projects under the general guidance of a principal.
This position will require fieldwork travel.
Aubertine and Currier offers a comprehensive benefit packing including competitive wage rates, paid time off, medical insurance, company sponsored 401K plan, profit sharing plan, and paid technical training and educational loan reimbursement programs.
*Desired Skills and Qualifications:*
· Bachelor’s Degree in Engineering or Engineering Technology required
· Registration as a Professional Engineer (P.E.)
· 6 - 12 years of qualifying civil engineering design experience
· Proven technical background in civil engineering
· Ability to develop proposals to help obtain future work
· Successful experience in site design, roadway design for subdivisions and local roads, drainage analysis and design, development of plans, specifications and cost estimates.
· Ability to produce contract documents and project management experience
· Strong verbal and written communication skills
· Strong organizational and interpersonal skills to work efficiently with team members and clients.
· Ability to meet project demands and deadlines
*Pay Rage:*
A&C is committed to offering fair and equitable compensation. The pay range listed is an approximation of our good faith effort to provide an anticipated wage range. The specific salary offered is dependent on the candidate’s relevant experience, education, certifications, and licensure.
Pay Range: $36 - $48 / hour depending on experience
*Category:* Engineering
*Full Time/Part Time: *Full Time
*Exempt/Non Exempt :* Non Exempt
Job Type: Full-time
Pay: $36.00 - $48.00 per hour
Expected hours: 40 – 50 per week
Benefits:
* 401(k)
* 401(k) matching
* Dental insurance
* Health insurance
* Health savings account
* Life insurance
* Paid time off
* Tuition reimbursement
* Vision insurance
Ability to Commute:
* Watertown, NY 13601 (Required)
Ability to Relocate:
* Watertown, NY 13601: Relocate before starting work (Required)
Work Location: In person
Remote working/work at home options are available for this role.
Position Responsibilities: · Maintain accurate records, in excel or notes, to support or verify correct allocations that need to be submitted by product and business · Collaborate and respond to requests from sales, marketing, and supply chain operations to support MDS customer service excellence · Partner cross-functionally to correct issues impacting customer delivery or various escalation requests · Monitor inventory reports and alert network team to move product when inventory is in the incorrect DC/storage location · Participate in meetings with key stakeholders to review allocation status for the team or BOTs · Learn, gain access to, and leverage various systems in support the requests, including SAP, Power BI, SharePoint, or Excel, and navigate challenges with minimal supervision as proficient from training · Comply with all local, state, and federal safety regulations, policies, and procedures, including Hazardous waste regulations, through consistent application of sound quality assurance principles Position Qualifications: · 2-6 years of experience in supply planning, distribution, order management, or other supply chain environment · Strong Problem solving, good communication/customer service skills, and discipline to learn · Experience utilizing SAP is preferred · A minimum of a Associate’s Degree in Supply Chain, Production Engineering, Business, Logistics, Operations Management, or other relevant field Note: This is a W2 contract role – C2C & 3 rd party candidates WILL NOT be considered .
Remote working/work at home options are available for this role.
Mindlance is here to help you to find the perfect fit with just the right company.
Currently, we are seeking an Accounts Payable Clerk for an exciting career growth opportunity.
Make your next big career move with the kind of position that will allow you to be genuinely passionate about the work you do! Our recruiters will work closely with you to help you get the edge over the competition.
Let Mindlance advocate for you – apply today! “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans.” Job Title: IAM Engineer Job Category: IT Industry: Airlines Job Location: Remote Pay rate: $ $70-78/hr on w2 Duration: 7+ Months IAM Engineer Job Description Job Details: Notes: Strong Microsoft EntraID experience and passwordless multi-factor authentication experience.
Top 5 Skill sets · Configuring authentication (OIDC, SAML, OAuth) for applications · Microsoft Entra conditional access policies · Experience with enabling MFA and SSO · Migration of applications between Identity Platforms/Providers · Developing automation/scripts to support onboarding of applications and users to Identity platforms Nice to have skills or certifications: · Duo Experience, Microsoft Entra, Oracle Access Manager · Enable Microsoft Entra app proxy · CISSP or Azure Certifications · This is a senior-level position that will execute the implementation of designs and requirements provided by IAM architects · and analysts and ensures that IAM capabilities and services are successfully integrated within systems across the · organization while also providing ongoing support and maintenance as needed for IAM processes and technology.
Job Summary The IAM Security Engineer is responsible for implementing, integrating, and supporting authentication and authorization solutions aligned with Cybersecurity and Digital Risk (CDR) principles.
This role focuses on protecting enterprise data, reducing security risk, and enabling secure access for the Client workforce.
The Senior IAM Engineer will lead the implementation and support of modern enterprise Workforce IAM systems.
They will collaborate closely with cross-functional development teams, architects, analysts, and business stakeholders to ensure secure identity solutions are integrated throughout the product lifecycle.
This role serves as a key technical contact for IAM authentication and authorization services across the organization.
Essential Job Accountabilities (Core responsibilities accounting for 10% or more of the role) 1.
IAM Platform Implementation & Support (40%) · Implement, administer, and support workforce IAM platforms including Oracle Access Manager (OAM), Microsoft Entra, and Duo.
· Design, configure, and troubleshoot authentication and authorization solutions throughout the SDLC.
· Support automated migration of applications from Oracle Access Manager to Microsoft Entra.
· Onboard and integrate new applications with Microsoft Entra.
· Perform detailed root cause analysis of IAM issues and implement preventative solutions.
· Engineer scalable, secure, and high-performance IAM solutions.
2.
IAM Process Engineering & Automation (20%) · Develop, enhance, test, document, and maintain IAM integration processes.
· Simplify and automate access management workflows to improve user experience.
· Architect and implement accelerators and automation enablers for IAM operations.
· Identify optimization opportunities and execute strategies to improve efficiency, scalability, and service delivery.
Job Title: IAM Engineer Job Category: IT Industry: Airlines Job Location: Remote Pay rate: $ $70-78/hr on w2 Duration: 7+ Months Email Qualified Resumes to: IAM Engineer Job Description Job Details: Notes: Strong Microsoft EntraID experience and passwordless multi-factor authentication experience.
Top 5 Skill sets · Configuring authentication (OIDC, SAML, OAuth) for applications · Microsoft Entra conditional access policies · Experience with enabling MFA and SSO · Migration of applications between Identity Platforms/Providers · Developing automation/scripts to support onboarding of applications and users to Identity platforms Nice to have skills or certifications: · Duo Experience, Microsoft Entra, Oracle Access Manager · Enable Microsoft Entra app proxy · CISSP or Azure Certifications Job Summary The IAM Security Engineer is responsible for implementing, integrating, and supporting authentication and authorization solutions aligned with Cybersecurity and Digital Risk (CDR) principles.
This role focuses on protecting enterprise data, reducing security risk, and enabling secure access for the Client workforce.
5.
Metrics, KPIs & Operational Support (10%) · Support delivery of IAM metrics and KPIs through system analysis and integrations.
· Provide ongoing operational support and maintenance for IAM services and processes.
Required Qualifications & Experience IAM & Security Expertise · In-depth knowledge of Workforce IAM, Single Sign-On (SSO), and Multi-Factor Authentication (MFA).
· Proven experience onboarding SSO applications and integrating MFA with cloud-based identity providers.
· Strong understanding of modern authentication protocols and standards: o FIDO2, SAML, OAuth, OIDC, Kerberos, Federation · Hands-on experience with: o Passwordless authentication o API Gateways o SCIM connector development o Identity platforms such as Microsoft Entra, Duo, Oracle Access Manager, Ping Identity, Okta, or ForgeRock Compliance & Risk · Practical knowledge of compliance and regulatory frameworks: o SOX, PCI, FAA, GDPR, PII · Strong understanding of Zero Trust architecture, adaptive risk-based authorization, identity proofing, and verification technologies.
· Familiarity with security frameworks and governance standards: o ISO, NIST, CSA Controls Matrix Technical & Industry Experience · Experience with large-scale identity transformation initiatives, including migration from on-premise to cloud-based IAM services.
· Prior experience implementing passwordless technologies in large enterprise environments.
· Experience supporting IAM functions within the airline or transportation industry (preferred).
· Exposure to AI/ML, algorithm development, or automation-driven technical solutions (preferred).
Software Development & Delivery · Expertise in modern software development lifecycles and Agile methodologies.
· Experience with automated cloud infrastructure deployment.
Core Competencies · Strong written and verbal communication skills; ability to communicate with both technical and non-technical audiences.
· Excellent attention to detail with qualitative and quantitative data.
· Strong analytical and problem-solving skills with the ability to adapt quickly to changing priorities.
· Demonstrated initiative and ownership of deliverables and outcomes.
Remote working/work at home options are available for this role.
