Engineering Jobs in Alameda, CA

Open date: March 10, 2026

Next review date: Tuesday, Mar 24, 2026 at 11:59pm (Pacific Time)

Apply by this date to ensure full consideration by the committee.

Final date: Thursday, Apr 9, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

Berkeley Summer Sessions & Study Abroad is a vibrant and dynamic organization that collaborates across faculty, academic units, international partners and campus service providers to enable more than 15,000 current and prospective Berkeley students, visiting students, and high school students to participate in more than 600 summer courses, study abroad experiences, global internships, and other learning opportunities. We are committed to offering quality, innovative learning experiences through open enrollment to a diverse audience of world-wide learners, while supporting the campus missions and commitments to its stakeholders.

Berkeley Summer Sessions & Study Abroad is a part of the division under the leadership of the Dean of Extended Education that also includes University Extension and Osher Lifelong Learning Institute.

Summer Sessions, in partnership with UC Berkeley's Electrical Engineering and Computer Science department (EECS), invites applications for a pool of qualified, dynamic instructors with a commitment to Pre-College education in Computer Science, Programming, and Data Science to teach high school students (grades 10-12) in our Berkeley Summer Computer Science Academy. This intensive, non-credit program is offered in-person over 2 weeks during weekdays (June 22, 2026 - July 3, 2026) on the UC Berkeley campus with some online instructional components, such as an Instructor Orientation and a student pre-arrival Welcome Webinar.

Applicants must be authorized to work in the United States at the time of hire. Visa sponsorship is not available for this position.

We are seeking qualified applicants who possess current subject matter expertise and teaching proficiency in the SNAP! programming language/coding software and in other introductory coding, computer science, data science, and artificial intelligence concepts.

The department seeks candidates who can support the success of all students through inclusive curriculum, classroom environment, and pedagogy. Specific duties and expectations will vary depending on the method of instruction including: Classroom (In-Person).

• 
  
• For synchronous instruction (classroom), duties include but are not limited to: syllabus development; assignment development; lesson planning for class meetings; preparing and submitting required texts and course materials; reviewing and updating Canvas course site; and delivering lectures, presentations, and learning activities for all required hours of instruction.
  
• For all instruction (regardless of course format) duties include but are not limited to: completing required trainings as mandated by the UC Presidential policies; responding to student questions and learning needs in a timely manner; reviewing and providing feedback on student work; utilizing University-approved course support platforms including the Canvas Learning Management System, Zoom, Google Workspace, etc.; reviewing and following University and departmental policies, logistics, and other guidelines; and responding to other requests from the Program Director or Department Director in a timely manner.
  

Berkeley Summer Computer Science Academy: summer-computer-science-academy

UC Berkeley's SNAP! Programming Language:

• 
  
• Bachelor's degree or equivalent international degree (or enrollment in a bachelor's degree or equivalent international degree program) required.
  

• 
  
• Bachelor's Degree or equivalent international degree required by the start date of the position.
  
• Minimum of one year of experience in related content area.
  
• Availability to teach in-person on the UC Berkeley campus weekdays between June 22, 2026 and July 3, 2026.
  

• 
  
• Advanced degree (or enrollment in an advanced degree) in course subjects.
  
• Subject matter expertise in SNAP! programming language/coding software and in other introductory coding, computer science, data science, and artificial intelligence concepts.
  
• 1 or more years of teaching experience in the course subject at a United States K-12, college, or university institution.
  
• Experience in creating syllabi, learning objectives, lectures/presentations, learning activities, assignments, assessments, exams, and quizzes.
  
• Ability to convey conceptual and complex ideas and information.
  
• Effective verbal/written communication and presentation skills (English).
  
• Effective organizational skills with attention to detail.
  
• Ability to collaborate with colleagues and work within a team environment.
  
• Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
  
• Proficiency in (or willingness to learn) instructional and other technology, such as: Learning Management Systems (Canvas); lecture/presentation capture applications (Camtasia/Panopto); Microsoft Office (Word and PowerPoint); file sharing (Google drive or Dropbox); and Google Workspace tools (email, calendar, docs, sheets, slides, etc).
  
• Familiarity with Title IX, CANRA, CLERY, Family Educational Rights and Privacy Act (FERPA) and related federal and state laws, health & safety regulations, policies and procedures, and risk management guidelines and best practices related to working with minors or demonstrated ability to learn such laws.
  

• Curriculum Vitae/Resume - Your most recently updated C.V. or Resume.

  
  

• Cover Letter - Please discuss prior teaching experience, teaching approach, and other/future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
  
  (Optional)

  
  

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

About Pinterest:

Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.

Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.

At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.

Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.

We are looking for a passionate and strategic Senior Product Manager, Growth - Performance Marketing to lead one of our most important acquisition channels on the Growth team. Each month, the Growth team helps over 600M people around the world find their inspiration on Pinterest. You'll fully own the vision, strategy and execution for Pinterest's paid growth channels, driving efficient and scalable user acquisition.

Reporting to the Group Product Manager (Growth Acquisition), you'll lead high-impact initiatives from ideation through delivery. You'll partner closely with Engineering, Data Science and Marketing to build and ship a roadmap of bold changes in service of creating a best-in-class user experience for current and future Pinners. You'll tackle challenging, complex problems at scale and your work will help bring the inspiration and joy of Pinterest to more people around the world, more efficiently than ever before.

What you'll do:

• 
  
• Lead the product vision, strategy, and execution for performance marketing, owning outcomes for scalable, efficient growth across paid channels.
  
• Drive clarity, alignment, and prioritization across a broad crossfunctional team in an ambiguous, complex product area with substantial impact on topline growth. Influence senior stakeholders and contribute to long-term strategy for acquisition.
  
• Partner closely with Marketing, Engineering, and Data Science to build and evolve the core systems, experimentation, measurement infrastructure, and optimization tools that improve how we plan, execute, and scale paid marketing.
  
• Leverage strong analytical skills to dig into data, identify the highestimpact opportunities in the paid marketing lifecycle, and help the organization make better, faster, and more confident investment decisions.
  

What we're looking for:

• 
  
• Demonstrated success in product management at fast-growing companies.
  
• Strong technical background (or prior work experience as a software engineer/data scientist) that lets you dive deep into data and complex technical problems alongside your engineering team.
  
• Working knowledge of performance marketing mechanics (e.g., attribution, incrementality testing, bidding and budgeting, targeting, and funnel measurement).
  
• Strong analytical skills to define product strategy and drive decision making.
  
• Ability to clearly articulate complex technical concepts to non-technical audiences in written and verbal communication.
  
• Prior experience with machine learning, recommendation systems, or generative AI a plus.
  
• Bachelor's degree in a relevant field such as Computer Science, or equivalent experience.
  

Relocation Statement:

• 
  
• This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.
  

• 
  
• We let the type of work you do guide the collaboration style. That means we're not always working in an office, but we continue to gather for key moments of collaboration and connection.
  
• This role will need to be in the office for in-person collaboration 1-2 times/quarter and therefore can be situated anywhere in the country.
  

#LI-REMOTE
#LI-REX

At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.

Information regarding the culture at Pinterest and benefits available for this position can be found here.

Our Commitment to Inclusion:

The Engineering Assistant will provide technical and administrative support within an engineering environment. This role supports a team of engineers and assists with work related to the design, construction, maintenance, and operation of infrastructure. Under general supervision, the Engineering Assistant will perform a variety of technical and office-based tasks, including but not limited to:

• Creating charts, graphs, drawings, and technical sketches
• Collecting, reviewing, and analyzing engineering data
• Performing and verifying mathematical calculations
• Preparing and reviewing computer inputs and outputs
• Writing, updating, and revising basic computer programs or automated tools
• Managing engineering drawings, files, and documentation
• Assisting with contract-related tasks and general administrative support associated with technical office operations

Qualifications

• Associate degree in Engineering or an equivalent combination of technical education and relevant experience
• 2-3 years of experience in clerical or administrative support roles
• Proficiency with business and technical software, such as Microsoft Office Suite, SAP, Adobe Acrobat, or similar tools
• Ability to interpret written technical standards and effectively communicate information both verbally and in writing
• Experience preparing complex forms, reports, records, and reference materials used for reporting and audits
• Strong work ethic and a high level of professionalism
• Excellent interpersonal skills with a positive, collaborative, team-oriented mindset
• Strong attention to detail and accuracy
• Clear and effective written and verbal communication skills

Manufacturing Test Software Engineer

Salary: $125,000 – $150,000 + equity & benefits

Location: Mission District, San Francisco, CA

We’re looking for a self-motivated Manufacturing Test Software Engineer to join our R&D/Pilot test team in San Francisco. You’ll work closely with R&D and Operations to improve test systems, processes, and production readiness for LiDAR products.

Key Responsibilities

• Maintain, enhance, and deploy test systems and automation platforms
• Drive improvements in test efficiency, yield, and product quality
• Analyze root causes of failures and implement corrective actions using tools such as 8D, 5 Whys, and Fishbone analysis
• Support scalability and manufacturability projects
• Prepare technical documentation and train test operators

Required Skills & Experience

• Strong Python programming and debugging skills
• Experience with test automation in manufacturing environments
• Familiarity with source control tools (Git, Jira, etc.) and quality standards (SPC, GR&R, control charts)
• Experience with LiDAR, robotics, vision systems (Cognex/OpenCV), or test measurement equipment is a plus
• Bachelor’s degree in Computer Science, Engineering, or equivalent experience
• 10+ years supporting product tests in manufacturing

Red Oak Technologies is a leading provider of comprehensive resourcing solutions across a variety of industries and sectors including IT, Marketing, Finance, Business Operations, Manufacturing and Engineering.

Our client is an electronics manufacturer. They are looking for a Manufacturing Technician (Swing Shift) to join their team. This role is a CONTRACT position. Position will be ONSITE. Candidate must be able to commute onsite to San Francisco, CA.

**Swing Shift – 2:00 PM – 10:30 PM – Monday through Friday – Some work on Saturday as needed**

**Gated private parking lot available for contractors**

**$30/hr - $35/hr**

Position Requirements:

• Follow all Safety and Laser Safety procedures and requirements
• Be able to construct, test and calibrate engineering and production robotic and computer-controlled assembly systems using engineering prints, schematics, assembly instructions and engineering direction
• Knowledgeable in high precision measuring equipment, calibration, and detailed record generation

Experienced and Proficient in the following:

• Mechanical hand and power tools
• Oscilloscopes, DMM, Signal Generators, Optics, Cameras
• Laser safety, lasers, laser pattern recognition, beam focus, and active alignment
• Auto dispense and cure of UV adhesive
• Multiple axis, vision assisted, computer controlled robotic assembly equipment in both a R/D and Volume Manufacturing environment
• Identification of “Root” Cause of Manufacturing, Quality and Yield issues
• Microsoft Office, Standard SPC and Flowcharts packages
• Pneumatic actuated Slides, Grippers, etc.
• Hex Pod Tables, Active Alignment
• Excellent reading, writing, and communication skills in English
• Minimum of 5 years industry experience, Lidar Sensor experience preferred but not required
• Be able to stand for long periods of time
• Lift and carry 35 lbs

Red Oak Technologies is made up of people from a wide variety of backgrounds and lifestyles. We embrace diversity and invite applications from people of all walks of life. See what it’s like to be at the top; connect with one of our recruiters and apply today.

Red Oak Tech: Quality | Talent | Integrity

Note: Compensation rates are based on years of experience and/or level of skills relevant to the opportunity.

Ray Therapeutics mission is to restore vision to people with retinal degenerations. RayTx is using a novel bioengineered optogenetic protein optimized for human vision delivered by AAV to restore visual function in a mutation agnostic approach and without the need for light enhancing eyewear. The company is developing its lead candidate RTx-015 in retinitis pigmentosa, a degenerative retinal disease with significant unmet medical need as well as a pipeline to treat both rare and large market indications.

We are currently seeking a highly motivated and detail-oriented Manager, CMC Product Management to join our team in the mission to restore vision to patients. This role will report to the Director, CMC Product Management and will be responsible for managing day-to-day CMC product activities across early and late phase development.

The Manager will work closely with internal CMC teams, Quality, Regulatory and external CDMOs to ensure timely execution of manufacturing plans, regulatory deliverables and product lifecycle activities. The position requires hands on process and/or analytical development and GMP AAV manufacturing and/or testing experience with the ability to be a team player both internally as well as with our external partners. The role is based in the Berkeley, CA office with a hybrid work from home/in office requirement and will require travel to our contract development and manufacturing organizations in the United States.

Essential Duties and Responsibilities:

• Support execution of RayTx’s CMC product lifecycle activities across development stages, including process development, tech transfer, manufacturing and regulatory submissions.
• Manage assigned CMC product activities to ensure alignment with program timelines, milestones, and development goals.
• Track CMC deliverables, timelines and communicates progress to stakeholders.
• Collaborate with CMC Analytical and MSAT teams on tracking and trending initiatives and data management.
• Serve as a day-to-day point of contact for assigned CDMO and product distribution vendors.
• Review and provide input on GMP documentation including, but not limited to master production records, test procedures, deviations, CAPAs and completes records.
• Provide input into risk mitigation and communicate to internal team.
• Support preparation and review of CMC sections for regulatory filings (IND, CTA, BLA, MAA) and ensures adherence to GMP and ICH guidelines.

Qualifications and Experience:

• Minimum bachelor's degree in relevant scientific or engineering discipline.
• 8+ years relevant biotech experience.
• Hands on experience in GMP AAV gene therapy manufacturing preferred.
• Knowledge of AAV analytical methods and testing preferred.
• Tech transfer experience preferred.
• Experience working with CDMO and external vendors preferred.
• Excellent scientific knowledge and acumen.
• Familiarity with CMC regulatory requirements and documentation
• Ability to travel up to 20%

Compensation Range and Benefits:

• For this role, the anticipated base salary range: $135,000 to $160,000, based on the candidate's professional experience level. The final salary offered for this position may take into account a number of factors including, but not limited to skills, education, and experience.
• Ray Therapeutics also offers annual performance-based bonus, annual equity awards and a comprehensive benefits package.

At Ray Therapeutics, we celebrate diversity and are committed to creating an inclusive environment for all employees; providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law.

All employment is decided on the basis of qualifications, merit, and business need.

Search Firm Representatives Please Read Carefully

Ray Therapeutics does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company. No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Please, no phone calls or emails.

Senior Supply Chain Manager

Location: San Leandro, CA

About the Company

Our client is a Series A startup building robots that build solar farms. This is a fast-moving company, which means constant opportunities for learning and growth. You’ll have a large impact on the direction of the company, and will be compensated accordingly. The company is MIT-founded and backed by top generalist and climate tech investors, including Energy Impact Partners, Founders Fund, Lux Capital, and Y Combinator (S21). If you are excited to work on interesting problems with direct climate impact, you’re going to fit right in with this team.

Key Responsibilities

• Drive end‑to‑end supply chain strategy for hardware/robotic systems, balancing cost, quality, delivery, and risk across custom and off-the-shelf component inputs
• Build, maintain, and continuously improve the company’s Bill of Materials; implement should‑cost/clean‑sheet models; drive PPV tracking and BOM roll‑ups that tie to finance
• Preempt supply chain bottlenecks by proactively planning for future system builds
• •Identify and mitigate risk across the supply base (single‑source, geopolitical, commodity volatility); create continuity plans and buffer strategies aligned to program schedules
• •Develop and execute category strategies, multi‑source/dual‑source critical parts, and negotiate capacity reservations, LTAs, and commercial terms
• •Drive down cost and lead time via creative sourcing, contract structure, and negotiation
• Help build a high‑performing team covering procurement, vendor management, expediting/execution, receiving, and accounts payable
• •Stand up scalable supplier management: scorecards, reviews, corrective actions, and supplier development to improve OTD and cost
• •Continuously improve accounts payable processes: vendor onboarding, COIs/W‑9s, credit/terms, POs, receiving
• •Coordinate closely with finance to manage equipment lease processes without slowing procurement
• Partner tightly with Design, Manufacturing, and Field Ops to flow R&D → production: integrate DFM/DFA and ECOs; ensure part readiness and ramp capacity
• Establish the operating system for materials: demand planning, MRP, and inventory policies (cycle counts, location control, kitting), and logistics strategy

Required Qualifications

• Operate effectively in the fast‑paced environment of a rapidly growing startup, with technical aptitude and excellent written and verbal communication
• Feel energized by a mission to accelerate the clean energy transition through automation
• Bring 5+ years in hardware/industrial/manufacturing supply chain roles, including 2+ years leading teams with measurable cost, delivery, and quality outcomes
• Are a strategic supply chain leader who is equally comfortable building the long‑term architecture and diving into the BOM to find dollar‑level savings
• Have deep experience with BOM costing across mechanical and electrical categories (fabrications, machining, harnesses, purchased assemblies)
• Are a sharp negotiator who can structure LTAs, capacity reservations, and pricing mechanisms that survive scale‑up and market swings
• Build clear processes and simple, scalable systems, owning data quality and driving disciplined S&OP/MRP execution
• Are fluent with ERP/MRP and source‑to‑pay concepts (items, AVL, lead times, safety stock, three‑way match, receiving) and comfortable partnering with Finance on reconciliations and cash forecasting
• Translate engineering changes into material plans and supplier actions; you understand ECOs, DFM/DFA, and the realities of prototype → production ramp
• Are based in or can relocate to the SF Bay Area

Preferred Qualifications

• Have scaled a supply chain function from one to n production for complex mechanical systems
• Have experience with complex industrial robotics/automation assemblies, and/or very large-scale components
• Have worked with MES/PLM/AP systems (e.g., ION, Silkline) and understand how to keep item and revision data in sync across engineering and ERP
• Have experience managing and helping build a team
• Have implemented VMI/consignment and/or kanban; understand import/export logistics and incoterms
• Are comfortable modeling in Excel (costed BOMs, PPV, sensitivity) and presenting insights to executives and the board

Compensation

Base pay is one element of the Total Rewards package which will also include comprehensive benefits and equity. The annual base salary range for this position is from $130,000 - 180,000. The actual base pay offered will be determined on factors such as years of relevant experience, skills, education, etc.

Equal Opportunity Employer - From the Company

We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Berkner Group has been retained to execute this search. If you were contacted by Berkner Group, please reply to the person who contacted you. If you are applying to a job posting, please email your resume and a brief introduction to Please include your name and the title for this position ([Your name] - Sr. Supply Chain Manager - 7X4VW9W5) in the subject line of your email. We look forward to hearing from you!

Role: Supply Chain Manager

Industry: Energy Storage / Advanced Materials / Clean Energy

Location: Alameda, San Francisco

Compensation: Competitive base + equity + benefits

This is a compelling opportunity for a hands-on Supply Chain Manager to design, build, and scale the end-to-end supply chain for a fast-growing electrolyte technology startup. Anthro Energy is developing breakthrough battery materials and preparing for rapid scale-up toward commercialization.

You will play a foundational role in shaping core operational systems—owning day-to-day execution while building the long-term processes needed to support R&D, pilot manufacturing, and future production growth.

Key Responsibilities:

• Own procurement of raw materials, equipment, and supplies, ensuring reliable and cost-effective sourcing
• Coordinate inbound and outbound logistics, including freight, shipping, and customs activities
• Support production planning and scheduling to align material availability with operational needs
• Implement and manage inventory systems; maintain accurate records of inventory, shipments, and deliveries
• Work closely with suppliers to track orders, resolve quality issues, and prevent disruptions to R&D or manufacturing
• Build and manage supplier relationships; negotiate pricing, terms, and contracts
• Establish internal processes for incoming quality control and material handling
• Introduce tools, systems, and KPIs to improve supply chain efficiency and support rapid scale-up and commercialization

Qualifications:

• Bachelor’s degree in Supply Chain Management, Engineering, Operations, or a related field
• 4+ years of experience driving supply chain, logistics, or operations initiatives
• Experience supporting supply chains in advanced materials, chemicals, manufacturing, or energy storage environments
• Familiarity with ERP or supply chain management software and ability to implement digital tools
• Strong organizational skills with the ability to balance tactical execution and strategic planning
• Excellent communication, negotiation, and problem-solving abilities

Preferred Experience:

• Experience operating in early-stage or high-growth startup environments
• Familiarity with Mandarin or Korean
• Exposure to pilot-scale manufacturing or commercialization readiness
• Advanced degree for senior-level candidates

Who You Are:

• Hands-on, resourceful, and excited to build systems from the ground up
• Comfortable rolling up your sleeves while thinking several steps ahead
• Thrives in fast-paced, ambiguous environments
• Ownership-driven with a bias toward execution
• Motivated by building impactful clean energy technology

Job Responsibilities:

• Take full ownership of project delivery from concept through construction, ensuring alignment with Flint’s constructability and BIM standards, client expectations, and financial goals.
• Lead multidisciplinary teams in the coordination of architectural, engineering, and construction processes; provide strategic guidance across all phases of design-build execution.
• Oversee and manage detailed project schedules, deliverables, and budgets; ensure key milestones are met and proactively identify and resolve risks or roadblocks.
• Facilitate and lead high-level project meetings, including design charrettes, owner presentations, technical coordination sessions, and internal strategy meetings; set clear agendas, drive outcomes, and ensure accountability.
• Oversee engagement with school districts, local jurisdictions, city planning departments, and permitting agencies to streamline submittals, revisions, and approvals.
• Provide executive-level oversight of design documentation including contracts, narratives, scopes of work, and change documentation to ensure clarity, alignment, and quality.
• Drive proposal development, fee structuring, and project scoping in close coordination with other architects, estimating, preconstruction, and executive teams.
• Direct and manage BIM execution strategies in collaboration with VDC staff; ensure accurate modeling, clash detection, and seamless transition to construction documentation.
• Ensure all project documentation meets both regulatory and constructability standards; provide quality control oversight and technical reviews as needed.
• Resolve design and construction coordination challenges swiftly and decisively; escalate issues only when necessary and act as the primary point of accountability.
• Provide high-level mentorship and leadership to project architects, designers, and support staff; foster a proactive, solutions-driven culture focused on excellence, growth, and results.

Job Requirements, Qualifications, Characteristics:

• Bachelor’s degree in Architecture.
• Licensed Architect
• 10+ years of architectural project management experience with a strong understanding of design development, construction documentation, drawings and specifications, and coordination in a fast-paced, collaborative environment.
• High proficiency in Revit is required; experience with Bluebeam, Microsoft Excel, and other design and construction-related platforms is strongly preferred.
• Familiar with Adobe Creative suite, Lumion, Enscape, Autodesk construction cloud. Modeling/drafting software such as Sketchup and AutoCAD.
• Proficient is 3D modeling & coordination tools such as ACC and Revizto.
• Having education/ DSA and public project coordination is a must.
• Strong project coordination and communication skills, with proven success managing interdisciplinary teams and fostering collaboration between design, preconstruction, and field teams.
• Commitment to high standards of professionalism, equity, and teamwork; experience engaging with diverse communities is valued. Demonstrated ability to produce accurate and detailed technical drawings and construction documents.
• Must be proactive, self-motivated, and comfortable stepping into hands-on design tasks when needed to support team success.

Nibbi Summary

Nibbi Brothers has been a member of the Bay Area’s construction community since 1950. The Company is known for its integrity, innovation, quality, and contributions to the communities in which it works. Nibbi’s safety program often exceeds federal and state requirements, demonstrating that the safety and wellbeing of everyone associated with our projects is the highest priority. Core markets include commercial, civic, seismic retrofits, historic restoration, waterfront structures, education, housing, hospitality, and community-based facilities. Nibbi self-performs production framing and structural concrete. In addition to partnering with Nibbi’s general contracting business, Nibbi Concrete works with other Bay Area General Contractors. Our projects range in size from $5 million to over $200 million.

Nibbi provides its people with comprehensive benefits and opportunities for career development. We encourage continuing education at all levels. We are proud of our friendly, family culture that is based on respect, collaboration, and a strong work/life balance.

Position Summary

The ­Preconstruction Project Engineer’s primary responsibility is to assist and support Estimators and in the successful completion of assigned projects. The Project Engineer will assist with document management, risk management, and client relations. Occasional travel is required. This position reports to the Senior Manager of Preconstruction.

Essential Functions

• Assist with document management, risk management, and client relations of assigned projects from pre-construction to subcontract award.
• Ensure Nibbi’s standards of safety and quality are adhered to by assertively championing Nibbi’s safety culture to the project team and subcontractors.
• Represent Nibbi in a professional manner.

Responsibilities

• Manage project files and flow of information for the assigned project
• Manage RFIs and submittals
• Subcontractor Outreach
• Assist with subcontractor buyout
• Prepare detailed bid scopes for trade packages
• Perform detailed quantity takeoffs
• Maintain pertinent project logs
• Attend OAC meetings and conduct meetings when needed
• Attend company and industry events including meetings, trainings, workshops, etc.
• Other related duties as assigned or needed

Qualifications

Degree in Construction Management, Engineering, or related field, preferred. Candidates must have basic knowledge of general building trades and sequence of work, project financials and cost procedures, and EH&S practices. Key competencies are initiative, communication, teamwork, and dependability.Desired technical skills areProCore, Building Connected, Destini Estimator, On-Screen Take-off, and MS Office Suite.

Physical Demands

The physical demands described here are representative of those that must be met by an employee, with or without reasonable accommodation, to successfully perform the essential functions of this job. While performing the duties of this job the employee may be exposed to conditions that include weather such as heat and/or humidity and cold, fumes or airborne particles, exposure to dust and asphalt, and moving mechanical parts. There may be occasional exposure to toxic or caustic chemicals. Conditions can also include risk of electrical shock and risk of vibration. The noise level in the work environment can often be loud.

Project Engineers are regularly required to:

• Walk, climb stairs, sit, and stand.
• Talk and hear at normal levels.
• See with close vision, distance vision, color vision, peripheral vision, depth perception, and have the ability to adjust focus.
• Reach with hands and arms.
• Use hands and fingers to operate tools and other business machines.
• Lift and/or move up to 50 lbs.

Compensation & Benefits

Comprehensive medical, dental, and vision

Flex plans

Life insurance

Supplemental insurance plans

401K with employer matching

PTO

Holidays

Incentive compensation bonus

Tuition and student loan repayment assistance

Student loan repayment assistance

The anticipated salary range for this position is between $85,000 and $90,000, depending on experience.

Nibbi Brothers is an Equal Opportunity Employer. We do not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, veteran status or any other personal characteristic protected by law. Employment decisions are made on the basis of qualifications, merit, and business need.

Must be authorized to work in the US now and in the future without employer sponsorship. Nibbi uses E-Verify.

Contractor’s License #757362

Courtesy Notice to External Recruiters

Nibbi partners with external recruiters occasionally. We are open to working with others, provided our policy is followed:

• If you have a qualified candidate for a posted position, contact with your engagement agreement and the candidate’s qualifications (no identifying details).
• Do not send candidate information to anyone outside of HR. This increases the risk of a conflict if another recruiter has presented the candidate. You will not be considered the source of the candidate unless you work with HR.

ProcureAbility, a Jabil company, is the leading procurement services company, offering advisory, managed services, digital, staffing, and recruiting solutions. For 30 years, we have focused exclusively on helping clients elevate their procurement function. We combine leading methodologies, analytics, market intelligence, and industry benchmarks with our uniquely flexible and customizable service delivery model. Global organizations of all sizes trust ProcureAbility to transform their procurement operations, drive growth, and reimagine what’s possible.

Job Title: Sourcing and Contract Specialist

Our client, a leader in their industry, is hiring Sourcing and Contract Specialists. These are contract roles, currently scheduled through 12/31/26 with potential to convert to direct hire.

Hybrid Role: Training will be on-site for 2 weeks, and then the role will be hybrid. After the training period, the work is expected to be mainly remote with occasional on-site meetings.

Location: East San Francisco Bay area

Job Category: Procurement / Supply Chain

Job Level: Individual Contributor

Applicants must be authorized to work for ANY employer in the U.S. ProcureAbility is unable to sponsor or take over sponsorship of an employment Visa at this time.

What can you expect to do?

Responsibilities:

• Conducts negotiations with bidders, for non-routine, may support or work with Sourcing.

• Coordinates and assembles supporting documentation to support audits.

• Works with vendors and internal stakeholders to assemble, review, prepare, and route for vendor and management approval (using ARIBA and EDRS), necessary documents for these tasks.

• Works with vendors, Project Team to improve quality of supporting contract documents to reduce rework required by others.

• May assist in the creation and development of purchase requisitions.

• For Routine Contracts, reviews vendor proposals to ensure that rates and terms are consistent with outline agreements.

• May support / review vendor proposals to ensure that rates and terms are consistent with outline agreements.

• Ensures that Company standards are followed when executing contract documents.

• Tracks approval status of contracting documents from inception through approval and ensures that documents are routed expeditiously.

• For Routine Contracts, conducts negotiations with bidders, for non-routine, may support or work with Sourcing department.

• Reviews purchase orders and contracts as part of procurement approval process.

• Provides technical support and analysis in preparation of scope, cost, schedule, safety and environmental concerns pertinent to the contract specifications; and verify and process contract invoices.

What is needed to be successful in this role?

• Bachelor’s Degree in Construction Management, Engineering, Business Administration or related field

• Ability to work in cross-functional teams

• Ability to work in a team environment

• Ability to work on multiple issues and tasks

• Advanced in MS Excel, PowerPoint

• Demonstrated competencies on use of supply chain management tool (e.g. ARIBA) and other business systems tools (SAP, SharePoint, EDRS)

• Demonstrated knowledge of Company standards regarding contracting processes.

• Conflict resolution/negotiation skills

• Demonstrated ability to track contract costs, purchase order status, and other required information in SAP

• Demonstrated competencies on use of ARIBA and EDRS is a plus

• Process improvement experience

• Presentation Skills

• Verbal and Written Communication Skills

• Knowledge of Contractual Terms and Conditions

ProcureAbility, A Jabil Company, is proud to be an Equal Employment Opportunity and Affirmative Action Employer. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as a person with a disability, or other legally protected characteristics.

If you are a Qualified Person with a Disability or a Disabled Veteran and require assistance making your application, please get in touch with HR at

Don’t meet every single requirement? Studies have shown that women and people of color are less likely to apply for jobs unless they meet every qualification. At ProcureAbility, we are dedicated to building a diverse, inclusive, and authentic workplace, so if you’re excited about this role but your experience doesn’t align perfectly with every qualification in the job description, we encourage you to apply anyway. You may be just the right candidate for this or other roles.

HCLTech is looking for a highly talented and self- motivated Manufacturing Data Analyst-MES to join it in advancing the technological world through innovation and creativity.

Job Title: Manufacturing Data Analyst-MES

Job ID: 52691

Position Type: Full-time with HCLTech

Location: Alameda, CA

Role/Responsibilities:

• 10+ years of Manufacturing Analyst (Manufacturing data analytics) experience in Life Sciences domain.
• Collaborate with manufacturing, quality, supply chain, and IT stakeholders to map end-to-end business processes (manufacturing data) and identify optimization opportunities.
• Support data flow design, system integration across manufacturing /production systems.
• Ensure solution design and implementation comply with regulatory, cybersecurity, and data integrity requirements (21 CFR Part 11, ISO 13485, GxP).
• Developing dashboards or reports based on data flowing out from Manufacturing & Supply Chain systems for supporting decision making
• Experience with data visualization and reporting tools (Power BI, Tableau).
• Education: Professional MBA (PMBA) with a specialization in Manufacturing/Operations Management (business analysis expertise in manufacturing). Bachelor or Master’s degree in Engineering, Information Systems, Computer Science, or a related discipline.
• Strong knowledge of complete Manufacturing eco-systems (including their data flow) like MES, ERP, SAP systems
• Excellent analytical, problem-solving skills.
• Strong communication and stakeholder management capabilities across multi-functional teams.

Pay and Benefits

Pay Range Minimum: $32.69 per hour

Pay Range Maximum: $61.00 per hour

HCL is an equal opportunity employer, committed to providing equal employment opportunities to all applicants and employees regardless of race, religion, sex, color, age, national origin, pregnancy, sexual orientation, physical disability or genetic information, military or veteran status, or any other protected classification, in accordance with federal, state, and/or local law. Should any applicant have concerns about discrimination in the hiring process, they should provide a detailed report of those concerns to for investigation.

Compensation and Benefits

A candidate’s pay within the range will depend on their work location, skills, experience, education, and other factors permitted by law. This role may also be eligible for performance-based bonuses subject to company policies. In addition, this role is eligible for the following benefits subject to company policies: medical, dental, vision, pharmacy, life, accidental death & dismemberment, and disability insurance; employee assistance program; 401(k) retirement plan; 10 days of paid time off per year (some positions are eligible for need-based leave with no designated number of leave days per year); and 10 paid holidays per year.

How You’ll Grow

At HCLTech, we offer continuous opportunities for you to find your spark and grow with us. We want you to be happy and satisfied with your role and to really learn what type of work sparks your brilliance the best. Throughout your time with us, we offer transparent communication with senior-level employees, learning and career development programs at every level, and opportunities to experiment in different roles or even pivot industries. We believe that you should be in control of your career with unlimited opportunities to find the role that fits you best.

Director of Supply Chain

Location: San Francisco, CA (On-site / Hybrid)

Company: Anode Technology Company

About Us

Anode exists to accelerate the monumental shift away from the supersystem of extraction, processing, and burning of fossil fuels—toward lightweight capture and consumption from entirely renewable sources. We’re building scalable, silent, flexible, and efficient mobile energy infrastructure to power the zero-emission future. Our mobile battery energy storage systems (mBESS) represent a new category of clean, deployable power.

Position Overview

Anode is seeking its first Director of Supply Chain to establish the foundation of our sourcing, procurement, and cost-management disciplines. This is a hands-on, high-ownership individual contributor role that will evolve into a leadership position as Anode transitions from low-volume prototype builds to serialized production in 2027.

You will manage procurement activities spanning rapid prototype component sourcing to multi-million-dollar supply agreements with OEM partners. You will build and maintain the manufacturing bill of materials (MBOM), establish supplier relationships, and ensure that realized and projected costs are clear, traceable, and actionable. A critical near-term priority is developing a contract manufacturing partnership in 2026 to support Anode’s path to high-volume manufacturing. As our organization scales, you will shape sourcing strategies, supplier relationships, and manufacturing partnerships—laying the groundwork for a supply chain that can grow with the company.

Key Responsibilities

• Contract Manufacturing Partnership: Lead the evaluation, selection, and onboarding of a contract manufacturing partner in 2026 to support both low-volume prototype production and future high-volume serialized manufacturing. Define technical requirements, establish quality standards, and structure partnerships that can scale with product demand.
• Supplier Development & Management: Develop and manage a diverse supplier base spanning local fabricators, component distributors, and major OEM partners. Negotiate terms, monitor performance, and maintain trusted relationships that balance cost, quality, and delivery schedule.
• Cost Management & MBOM Ownership: Build and maintain organized, accurate manufacturing bills of materials that reflect both realized prototype costs and projected production costs. Work with engineering teams to capture design changes and ensure cost implications are visible and tracked.
• Strategic Sourcing & Risk Mitigation: Navigate evolving tariffs, supply disruptions, and regional manufacturing dynamics. Identify alternate sources, evaluate total cost of ownership, and develop long-term sourcing strategies that balance cost competitiveness with supply chain resilience.
• Procurement Execution: Own day-to-day purchasing activities across mechanical, electrical, and system components—driving competitive quotes, placing orders, and ensuring timely delivery to support rapid hardware iteration and prototype builds.
• Operational Foundation: Establish scalable supply chain processes, documentation practices, and cost-modeling frameworks that will support the transition to serialized production—creating systems and standards that can mature with the company.
• Cross-Functional Collaboration: Partner closely with engineering, manufacturing, and operations teams to translate design requirements into sourcing strategies, manage component lead times, and resolve supply-related technical or schedule challenges.

Qualifications

Must Have:

• 7+ years of experience in supply chain, sourcing, or procurement roles within hardware or manufacturing environments
• Proven ability to operate both tactically and strategically—comfortable managing immediate procurement needs while building long-term sourcing plans
• Demonstrated success managing complex supplier bases across varied component categories and price points
• Experience with cost tracking, BOM maintenance, and supplier negotiations for electromechanical systems
• Ability to read and interpret engineering drawings, specifications, and bills of materials; comfortable engaging directly with engineers to clarify requirements
• Strong organizational, communication, and project management skills in fast-paced, early-stage environments

Preferred:

• Experience evaluating, selecting, and onboarding contract manufacturers for electromechanical or energy systems
• Background in energy storage, electric vehicles, heavy equipment, or other electrified hardware systems
• Experience scaling manufacturing operations from prototype to low-volume and high-volume production
• Understanding of contract manufacturing models, quality systems (ISO, AS9100, etc.), and supplier qualification processes
• Familiarity with tariff impacts, regional sourcing strategies, and cost-reduction methodologies
• Experience with ERP or PLM systems for BOM and procurement management

Why This Role Matters

As Anode's first supply chain hire, you will define how we source, procure, and cost-manage the components that power our mobile energy systems. Your work will enable engineering and manufacturing teams to move quickly and confidently—turning design intent into reliable, cost-effective hardware. This is a foundational role that will directly shape our operational capabilities and our ability to scale from prototype to production.

• 
  Two commercial buildings located in San Francisco (94105 / 94107)
  Mixed-use assets with a strong office focus
  
  

• Oversee daily operations, inspections, and maintenance for both commercial buildings
• Partner with engineering, security, janitorial, parking, and landscaping vendors
• Monitor preventative maintenance schedules and tenant work orders (Angus or similar)
• Manage parking operations and identify revenue optimization opportunities
  

• Own all property-level financials (no on-site accounting support)
• Prepare and analyze budgets, monthly variance reports, accruals, and expense tracking
• Manage CAM estimates, reconciliations, and recoveries
• Review payables, receivables, aging reports, and tenant billbacks
• Monitor expenses against budgets and contracts; prepare AFE requests
  

• Maintain accurate lease abstracts, CAM abstracts, stacking plans, and options in Yardi
• Support lease renewals, rent adjustments, operating expense reconciliations, and LOC tracking
• Manage Right of Entry and License Agreements
  

• Serve as the primary point of contact for commercial tenants
• Build strong, professional tenant relationships through proactive communication
• Oversee vendor performance and contract compliance
  

• Prepare monthly and quarterly operational reports
• Support insurance compliance, emergency preparedness, and risk management initiatives
  
  

• 4-5+ years of commercial property management experience (office, retail, or mixed-use)
• Strong financial background, including CAM, budgets, accruals, and variance reporting
• Hands-on experience with lease abstracts and CAM administration
• Proficiency with Yardi and MS Excel (Angus a plus)
• Professional communication style and strong organizational skills
  
  

• Commercial Property Manager who owns the financials end-to-end
• Bachelor's Degree preferred
• Detail-oriented, organized, and self-directed
• Comfortable working fully onsite in a professional office environment
• Commercial property management experience required; residential backgrounds will not align

Our San Francisco team spends most of its time working on large, complicated projects where no two days look the same. The scale of the work means everyone on the project team matters, including the Assistant Project Manager.

In our group this role is not treated like a back-office position. You are in the middle of the action, working directly with Project Managers, Superintendents, design teams, and trade partners. People who do well here tend to be curious about the work, ask questions, and take pride in learning how large projects actually come together.

Responsibilities

• Assist with project cost tracking and financial reporting

• Maintain RFIs, submittals, and construction documentation

• Support subcontractor procurement and scope coordination

• Coordinate communication with architects, engineers, and consultants

• Maintain organized project records and reporting logs

• Assist with project closeout and turnover documentation

Professional Background

•3+ years with a reputable commercial General Contractor

• Experience supporting active commercial construction projects

• Familiarity with construction documentation processes

• Strong organizational and communication skills

• Degree in Construction Management, Engineering, or related discipline preferred

A number of our Project Managers started their careers in this role. The expectation is not perfection on day one, but a genuine interest in the work and the discipline to keep improving as the projects progress.

If this sounds like something worth discussing, apply here on LinkedIn, contact one of our associates, or visit our website and complete the short form. We will schedule a conversation so you can learn more and decide whether it feels like the right next step.

We welcome interest from professionals across the San Francisco area including Oakland, Daly City, South San Francisco, San Mateo, and Berkeley. Relocation assistance is available for the right candidate.

Chief Civil Earthwork Estimator – Heavy Civil Construction

San Francisco, CA

• Employment Type: Full-Time
• Department: Estimating / Preconstruction
• Reports To: Chief Estimator / Estimating Manager

ABOUT US:

• We are a trusted leader in heavy civil construction, specializing in earthwork, grading, highway infrastructure, utilities, and large-scale site development. Our projects shape the foundation of transportation, energy, and public works systems across San Francisco and surrounding counties in delivering high-quality, cost-effective projects safely and efficiently — and we're seeking a skilled Civil Earthwork Estimator to help us continue that tradition

POSITION SUMMARY:

• The Civil Earthwork Estimator is responsible for preparing accurate, detailed, and competitive cost estimates for heavy civil projects, including mass excavations with shoring, site development, and large-scale grading operations. This role requires a deep understanding of production rates, equipment utilization, and civil construction practices

KEY RESPONSIBILITIES:

• Review project plans, specifications, and geotechnical data to prepare complete and accurate earthwork estimates
• Perform detailed quantity takeoffs for excavation, embankment, mass haul, subgrade preparation, and related work
• Analyze production rates, cycle times, haul distances, and optimize equipment spreads for efficiency
• Develop detailed cost breakdowns for labor, materials, equipment, and subcontracted work
• Solicit and evaluate quotes from suppliers and subcontractors
• Prepare comprehensive bid packages and proposals for public and private sector clients (DOT, Caltrans, municipal, and infrastructure)
• Collaborate with operations, field supervision, and project management to ensure bid accuracy and feasibility
• Use estimating tools such as Agtek, HCSS HeavyBid, Bluebeam, Civil 3D, and internal cost databases
• Participate in pre-bid meetings, site visits, and constructability reviews

QUALIFICATIONS:

Education:

• Bachelor's degree in Civil Engineering, Construction Management, or a related field (preferred)
• Experience: Minimum 10 years of estimating experience in heavy civil earthwork and infrastructure projects
• Strong knowledge of mass grading, haul planning, cut/fill balancing, and soil classification
• Proficient in reading and interpreting civil and structural drawings, specifications, and geotechnical reports
• Hands-on experience with estimating software such as HCSS HeavyBid, Agtek, and Bluebeam Revu
• Strong analytical, communication, and organizational skills
• Ability to work independently and manage multiple bids under tight deadline

WHAT WE OFFER:

• Competitive base salary + performance-based incentives
• Comprehensive benefits package (health, dental, vision, 401(k), etc.)
• Opportunities for professional growth and advancement
• A collaborative, safety-first work culture built on integrity and excellence

We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities.

req25-00884

Junior Civil Earthwork Estimator – Heavy Civil Construction

San Francisco, CA

• Employment Type: Full-Time
• Department: Estimating / Preconstruction
• Reports To: Chief Estimator / Estimating Manager

ABOUT US:

• We are a trusted leader in heavy civil construction, specializing in earthwork, grading, highway infrastructure, utilities, and large-scale site development. Our projects shape the foundation of transportation, energy, and public works systems across San Francisco and surrounding counties in delivering high-quality, cost-effective projects safely and efficiently — and we're seeking a skilled Civil Earthwork Estimator to help us continue that tradition

POSITION SUMMARY:

• The Civil Earthwork Estimator will support the Chief Estimator in preparing accurate quantity takeoffs, cost estimates, and bid proposals for heavy civil projects, including excavation, grading, and site development work. This entry-level role is ideal for someone early in their construction career who is eager to learn estimating fundamentals and grow within the organization

KEY RESPONSIBILITIES:

• Assist the Chief Estimator in reviewing project plans, specifications, and geotechnical reports
• Perform basic quantity takeoffs for excavation, grading, and related civil work under supervision
• Help collect and organize pricing information for labor, equipment, materials, and subcontractors
• Support the preparation of bid packages, proposals, and related documentations
• Assist in obtaining quotes from suppliers and subcontractors and maintain pricing logs
• Participate in site visits, pre-bid meetings, and constructability reviews as needed
• Learn and use estimating tools such as HCSS HeavyBid, Agtek, Bluebeam, and internal cost databases
• Collaborate with project managers, field teams, and the estimating team to support accurate bid development
• Maintain organized project files, estimates, and supporting documentation

QUALIFICATIONS:

Education:

• Associate degree or Bachelor's degree in Construction Management, Civil Engineering, or a related field (preferred but not required)
• Equivalent field or internship experience also considered.

Experience:

• At least 2-3 years of experience in construction estimating, project engineering, field engineering, or a related role
• Internship or co-op experience in civil construction is a plus

Skills:

• Basic understanding of civil construction, excavation, or grading operations
• Ability to read and interpret construction plans (training provided)
• Familiarity with estimating or construction software (HCSS, Agtek, Bluebeam) is a plus but not required
• Strong attention to detail, organizational skills, and willingness to learn
• Ability to work collaboratively and take direction in a fast-paced environment

WHAT WE OFFER:

• Competitive base salary + performance-based incentives
• Comprehensive benefits package (health, dental, vision, 401(k), etc.)
• Opportunities for professional growth and advancement
• A collaborative, safety-first work culture built on integrity and excellence

We are an equal opportunity employer, and we are an organization that values diversity. We welcome applications from all qualified candidates, including minorities and persons with disabilities.

req25-00885