Engineering Journal Jobs in Washington Remote
748 positions found — Page 4
Perform general maintenance functions to ensure guest service and sustainability standards are achieved and maintained throughout the hotel structure.
Potential Career Path
Chief Engineer Area Chief Engineer Regional Director of Engineering
Essential Job Functions
Assist Chief Engineer in interviewing, selecting, training, scheduling, coaching and supporting associates, ensuring they perform in accordance with established brand or hotel standards and consistent with HHM core values.
Conduct room inspections and identify repair needs.
Manage and coordinate bids, quotes and contracts for third party vendors.
Oversee small projects, or PIPS, and manage and report on the work progress.
Install or repair sheet rock and other wall coverings.
Paint designated areas and items.
Install and replace basic electrical fixtures.
Install, replace, and program televisions.
Perform minor plumbing functions.
Replace and repair heating and cooling pumps as well as preventative maintenance on units.
Troubleshoot and repair kitchen equipment.
Perform preventative maintenance on a scheduled basis and complete work orders as necessary; keep accurate records of PM's on all rooms and equipment.
Maintain the building exterior and \"curb appeal\" of entire hotel grounds.
Refurbish, paint and finish furniture and fixtures as needed.
Test, examine, and maintain hotel's life safety systems to ensure they are 100% operational at all times.
Maintain repair and preventive maintenance records and coordinate compliance of service contracts.
Perform and maintain work to local, state and Federal codes.
Be aware of guest satisfaction scores and work toward increasing departmental and overall guest satisfaction.
Follow sustainability guidelines and practices related to HHM's EarthView program.
Practice safe work habits, wear protective safety equipment and follow MSDS and OSHA standards.
Perform other duties as requested by management.
Position Requirements
High School diploma and/or trade school course work in related field preferred.
Previous engineer/maintenance experience required or equivalent training.
Local or state certifications may be required.
Work Environment and Context
Work schedule varies and may include working on holidays and weekends or alternate shifts.
Requires standing for extended periods, walking, pushing, lifting up to 50 pounds, bending and reaching, climbing, stooping, kneeling or crouching.
What We Believe
People Are Our Capability Hearts That Serve Only Excellence Stay Nimble - Own It.
Source: HHM Hotels
About Pinterest:
Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.
Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.
At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.
Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.
With more than 500 million users around the world and 300 billion ideas saved, Pinterest Machine Learning engineers build personalized experiences to help Pinners create a life they love. With just over 4,000 global employees, our teams are small, mighty, and still growing. At Pinterest, you'll experience hands-on access to an incredible vault of data and contribute large-scale recommendation systems in ways you won't find anywhere else.
Within the Monetization ML Engineering team, we try to connect the dots between the aspirations of Pinners and the products offered by our partners. In this role, you will be responsible for developing and executing a vision for the evolution of the machine learning technology stack within Ads.
What you'll do:
- Build cutting edge technology using the latest advances in deep learning and machine learning to personalize Pinterest
- Partner closely with teams across Pinterest to experiment and improve ML models for various product surfaces (Homefeed, Ads, Growth, Shopping, and Search), while gaining knowledge of how ML works in different areas
- Use data driven methods and leverage the unique properties of our data to improve candidates retrieval
- Work in a high-impact environment with quick experimentation and product launches
- Keep up with industry trends in recommendation systems
- Leverage LLMs to enhance content understanding
What we're looking for:
- 2+ years of industry experience applying machine learning methods (e.g., user modeling, personalization, recommender systems, search, ranking, natural language processing, reinforcement learning, and graph representation learning)
- Degree in computer science, statistics, or related field; or equivalent experience
- End-to-end hands-on experience with building data processing pipelines, large scale machine learning systems, and big data technologies (e.g., Hadoop/Spark)
- Practical knowledge of large scale recommender systems, or modern ads ranking, retrieval, targeting, marketplace systems
- Nice to have:
- M.S. or PhD in Machine Learning or related areas
- Publications at top ML conferences
- Expertise in scalable realtime systems that process stream data
- Passion for applied ML and the Pinterest product
- Background in computational advertising
Relocation Statement:
- This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.
#LI-HYBRID
At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.
Information regarding the culture at Pinterest and benefits available for this position can be found here.
US based applicants only$189,721—$332,012 USDOur Commitment to Inclusion:
Pinterest is an equal opportunity employer and makes employment decisions on the basis of merit. We want to have the best qualified people in every job. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion or religious creed, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, age, marital status, status as a protected veteran, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member) or any other consideration made unlawful by applicable federal, state or local laws. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. If you require a medical or religious accommodation during the job application process, please completethis formfor support.
About Pinterest:
Millions of people around the world come to our platform to find creative ideas, dream about new possibilities and plan for memories that will last a lifetime. At Pinterest, we're on a mission to bring everyone the inspiration to create a life they love, and that starts with the people behind the product.
Discover a career where you ignite innovation for millions, transform passion into growth opportunities, celebrate each other's unique experiences and embrace theflexibility to do your best work. Creating a career you love? It's Possible.
At Pinterest, AI isn't just a feature, it's a powerful partner that augments our creativity and amplifies our impact, and we're looking for candidates who are excited to be a part of that. To get a complete picture of your experience and abilities, we'll explore your foundational skills and how you collaborate with AI.
Through our interview process, what matters most is that you can always explain your approach, showing us not just what you know, but how you think. You can read more about our AI interview philosophy and how we use AI in our recruiting process here.
With more than 600 million users around the world and 300 billion ideas saved, Pinterest Machine Learning engineers build personalized experiences to help Pinners create a life they love. With just over 4,000 global employees, our teams are small, mighty, and still growing. At Pinterest, you'll experience hands-on access to an incredible vault of data and contribute large-scale recommendation systems in ways you won't find anywhere else.
Within the Monetization ML Engineering team, we try to connect the dots between the aspirations of Pinners and the products offered by our partners. In this role, you will be responsible for developing and executing a vision for the evolution of the machine learning technology stack within Ads.
What you'll do:
- Build cutting edge technology using the latest advances in deep learning and machine learning to personalize Pinterest
- Partner closely with teams across Pinterest to experiment and improve ML models for various product surfaces (Homefeed, Ads, Growth, Shopping, and Search), while gaining knowledge of how ML works in different areas
- Use data driven methods and leverage the unique properties of our data to improve candidates retrieval
- Work in a high-impact environment with quick experimentation and product launches
- Keep up with industry trends in recommendation systems
- Leverage LLMs to enhance content understanding
What we're looking for:
- 2+ years of industry experience applying machine learning methods (e.g., user modeling, personalization, recommender systems, search, ranking, natural language processing, reinforcement learning, and graph representation learning)
- Degree in computer science, machine learning, statistics, or related field
- End-to-end hands-on experience with building data processing pipelines, large scale machine learning systems, and big data technologies (e.g., Hadoop/Spark)
- Practical knowledge of large scale recommender systems, or modern ads ranking, retrieval, targeting, marketplace systems
- Nice to have:
- Publications at top ML conferences
- Expertise in scalable realtime systems that process stream data
- Passion for applied ML and the Pinterest product
- Background in computational advertising
Relocation Statement:
- This position is not eligible for relocation assistance. Visit our PinFlex page to learn more about our working model.
#LI-HYBRID
#LI-SM4
At Pinterest we believe the workplace should be equitable, inclusive, and inspiring for every employee. In an effort to provide greater transparency, we are sharing the base salary range for this position. The position is also eligible for equity. Final salary is based on a number of factors including location, travel, relevant prior experience, or particular skills and expertise.
Information regarding the culture at Pinterest and benefits available for this position can be found here.
US based applicants only$163,418—$285,982 USDOur Commitment to Inclusion:
Pinterest is an equal opportunity employer and makes employment decisions on the basis of merit. We want to have the best qualified people in every job. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, national origin, religion or religious creed, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, age, marital status, status as a protected veteran, physical or mental disability, medical condition, genetic information or characteristics (or those of a family member) or any other consideration made unlawful by applicable federal, state or local laws. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. If you require a medical or religious accommodation during the job application process, please completethis formfor support.
Job DescriptionAt Boeing, we innovate and collaborate to make the world a better place.
We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.The Boeing Defense, Space & Security (BDS) organization is seeking an Engineering Technical Support Tech (Associate and Mid-Level) to join the B-1 B Full Scale Fatigue Test team located in Tukwila, Washington .A successful member of this team will be responsible for managing paper and digital engineering documentation related to inspections and repairs for the Bombers B-1 B Full Scale Fatigue Test program.Position Responsibilities:Compiles, analyzes, develops and formats data by utilizing engineering standards, processes and computational tools to provide documentation that assists in the development of engineering life cycle products, services and processes.Analyzes documentation/products to verify regulatory conformance and contractual compliance.Maintains and improves products (e.g., engineering data, spreadsheets, and documentation), processes and services to ensure consistent quality of data used to accomplish engineering tasks.Creates and maintains design documentation by using company/industry standards to communicate the end product to customers.Develops and maintains engineering related user documentation to support the design of engineering systems.Maintains libraries to ensure accurate data collection for internal and external customersManages test hardware inventory, documentation and places orders for replacement hardware and materials in support of test execution as requiredOrganizes data for weekly, monthly, and annual engineering reports and test readiness reviewsThis position is expected to be 100% onsite.
The selected candidate will be required to work onsite in Tukwila, Washington.This position requires the ability to obtain a U.
S.
Security Clearance for which the U.
S.
Government requires U.
S.
Citizenship.
An interim and/or final U.
S.
Secret Clearance Post-Start may be required.Basic Qualifications (Required Skills/Experience):1 or more years of related work experienceExcellent organization and documentation skillsExcellent written, verbal communications and presentation skillsExceptional attention to detailDemonstrated ability to learn new processes quicklySkilled with MS365 office suite including Power Automate and Azure Dev OpsStrong desire to work with digital and paper engineering documentationLevel 2 Preferred Qualifications (Desired Skills/Experience):3 or more years' related work experience or an equivalent combination of education and experienceGeneral understanding of Aircraft structure and fastenersCan write code, scripts and macros in various programming languages, VBA & Python preferred but additional languages a plusSkilled at database development and can manage existing databases and develop new database tools using SQLExperience managing and organizing large libraries of digital and paper engineering documentsUnderstands machine learning tools and is skilled at creative applications of machine learning tools to accelerate engineering activitiesSkilled at digital automation of processes using Python, VBA, powershell or other coding languagesLevel 3 Preferred Qualifications (Desired Skills/Experience):General understanding of aircraft structure and fastenersGeneral understanding of aircraft mechanical structures detail part drawings5 years experience writing code, scripts and macros in various programming languages, VBA & Python preferred but additional languages a plus3 years experience with database development and can manage existing databases and develop new database tools using SQL5 years experience managing and organizing large libraries of digital and paper engineering documents3 years experience using machine learning tools and is skilled at creative applications of machine learning tools to accelerate engineering activities3 years experience performing digital automation of processes using Python, VBA, Power Shell or other coding languagesRelocation:Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.Shift:This position is for 1st shift.Union: This is a Union represented positionDrug Free Workplace:Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.Summary Pay Range Associate: $56,950
- 77,050Summary Pay Range Mid-Level: $68,850
- 93,150Applications for this position will be accepted until Mar.
23, 2026Export Control Requirements:This position must meet U.
S.
export control compliance requirements.
To meet U.
S.
export control compliance requirements, a "U.
S.
Person" as defined by 22 C.
F.
R.
§120.62 is required.
"U.
S.
Person" includes U.
S.
Citizen, U.
S.
National, lawful permanent resident, refugee, or asylee.Export Control Details:US based job, US Person requiredRelocationRelocation assistance is not a negotiable benefit for this position.Security ClearanceThis position requires the ability to obtain a U.
S.
Security Clearance for which the U.
S.
Government requires U.
S.
Citizenship.
An interim and/or final U.
S.
Secret Clearance Post-Start is required.Visa SponsorshipEmployer will not sponsor applicants for employment visa status.ShiftThis position is for 1st shiftEqual Opportunity Employer:Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Defense, Space & Security (BDS) Mobility, Surveillance & Bombers (MS&B) KC-46 Tanker Program is seeking a highly motivated, dynamic, and inclusive First Line Communications and Navigations Engineering Manager to lead the Communications and Navigations Systems team from either Tukwila, WA or Everett, WA .
This is an exciting time in the program as we partner with our US Air Force customer for enhanced mission systems upgrades as well as new international customers to grow the business. In this role you will be responsible for the engineering management of an integrated communication suite and aircraft navigations subsystem of electronics hardware. Leadership responsibilities will include management of the engineering team responsible for all aspects of the avionics hardware, including the design/architecture, integration, lab/aircraft testing, airworthiness certification, new business proposals, and supplier technical management. In addition, you will be in charge of managing the financial labor and material budgets as the Control Account Manager (CAM) for the team.
The Boeing KC-46 “Pegasus” is the new US Air Force aerial refueling tanker aircraft designed to support multi-role missions including refueling, cargo/passenger transport, and medevac airlift. The KC-46 is a military commercial derivative aircraft based on the Boeing 767-2C aircraft and modified per US Air Force specifications for the primary mission of aerial refueling US and Allied aircraft. The KC-46 accomplishes this refueling mission using either the Hose & Drogue or the Boom systems, which are capable of transferring fuel at rates of 400 or 1,200 gallons per minute, respectively. The KC-46 is also equipped with a suite of tactical situational awareness systems and self-defensive systems that allow the aircraft to provide closer support to combat aircraft when performing missions.
This position will report to the KC-46 Mission Systems Avionics (MSA) Senior Manager and will represent the Communications and Navigation Systems team for the KC-46 Tanker Program.
Position Responsibilities:
- Provide leadership, project management, and technical guidance to the engineering teams responsible for the system design/architecture, airworthiness certification, technical supplier management, production & fleet sustainment support, and RCCA investigations.
- Control Account Manager (CAM) for the team; responsible for ensuring up to date staffing forecasts, proper employee charging, and that costs and schedules remain on plan.
- Promote an inclusive team culture.
- Champion employee performance and career development.
- Support international customer campaigns and new business development proposals.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
Basic Qualifications (Required Skills/Experience):
- Bachelor of Science degree in Engineering, Engineering Technology (including Manufacturing Technology), Computer Science, Data Science, Mathematics, Physics, Chemistry or non-US equivalent qualifications directly related to the work statement.
- 3+ years of experience in an engineering management or lead role.
- Familiarity with Risk, Issue, and Opportunity (RIO) management.
- Experience with FAA and/or Military airworthiness certification.
- Experience with avionics, communication suite systems, and/or navigations hardware.
- Technical subcontractor supplier management.
Preferred Qualifications (Desired Skills/Experience):
- Knowledge and understanding of the Equipment Manager role and responsibilities.
- Familiarity with Earned Value Management (EVM).
- Knowledge and experience with Root Cause and Corrective Action (RCCA) processes and implementing corrective actions.
- Knowledge and experience with avionics lab, ground, and flight qualification and/or certification testing.
- Knowledge and experience with military or civil radios and SATCOM (e.g. MIL HF, etc.).
- Knowledge and experience with Radio Frequency (RF) engineering design and applications.
- Strong verbal and written communications skills.
- Have or have held an active U.S. Security Clearance in the past 24 months.
Conflict of Interest:
Successful candidates for this job must satisfy the Company’s Conflict of Interest (COI) assessment process.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Pay & Benefits:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $151,300 - $204,700
Applications for this position will be accepted until Mar. 26, 2026
Export Control Requirements:
This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.
Export Control Details:
US based job, US Person required
Education
Bachelor's Degree or Equivalent Required
Relocation
This position offers relocation based on candidate eligibility.
Security Clearance
This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Top Secret Clearance Post-Start is required.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for 1st shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Electrical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly experienced and innovative Principal Controls Engineer to lead the development, optimization and implementation of advanced control systems across critical infrastructure products and automation platforms. This role is critical to ensuring the performance, reliability, and scalability of critical systems, with a strong emphasis on data center infrastructure, power/energy management, and industrial automation.
This role will involve designing and developing wiring harness systems, including schematic creation, harness architecture, panel layout, developing specifications, selecting key components, and transitioning design to manufacturing. Furthermore, the position includes leading test process implementation and ensuring equipment alignment to maintain the highest standards of operational excellence and reliability.
What will you do?
- Define and own the control system architecture across multiple platforms, including PLCs, BMS, EPMS, and ATS systems, ensuring scalability, reliability, and maintainability.
- Develop detailed control system specifications, functional design documents, and interface definitions for all subsystems.
- Proficiency in PLC/SCADA programming, HMI development, and system integration with IT networks and facility equipment.
- Ability to read and create BOMs. visual aids, electrical schematics, control diagrams, and sequence of operations.
- Define control logic, sensor integration, and communication protocols (e.g., Modbus, BACnet, SNMP) for intelligent power and cooling management.
- Validate control systems through simulation, testing, and commissioning to ensure reliability, safety, and responsiveness.
- Experience with critical infrastructure systems: UPS, generators, switchgear, chillers, CRAC/CRAH units, fire suppression systems.
- Lead Factory Acceptance Testing (FAT) and Site Acceptance Testing (SAT) for new projects and revisions.
- Drive the development of system-level simulations and digital twins to validate control strategies before deployment
- Architect integration strategies for control systems with enterprise platforms such as SCADA, CMMS, and cloud-based monitoring tools
- Establish design patterns and best practices for modular and reusable control logic across projects
- Lead root cause analysis and resolution of complex control system issues during commissioning and operations
- Evaluate emerging technologies and automation trends to continuously improve system performance and efficiency
- Develop and maintain documentation for system architecture, control logic, and operational procedures
- Collaborate with electrical, mechanical, software, and facilities engineering teams to ensure seamless integration of control systems with physical infrastructure
- Work closely with cross functional teams to align control system designs with business requirements, timelines, and operational constraints
- Facilitate design reviews, technical workshops, and cross-functional planning sessions to ensure alignment and transparency across engineering disciplines
- Support commissioning and field teams during deployment, troubleshooting, and optimization of control systems
How will you get here?
Education:
- Bachelor’s Degree in Electrical Engineering or a relevant engineering discipline.
Experience:
- 8+ years pf experience in control system design and implementation
- Deep expertise in the following:
- PLC programming (Allen-Bradley, Siemens, Schneider Electric)
- Building Management Systems (BMS) integration and optimization
- Electrical Power Monitoring Systems (EPMS/EDPM) for real-time energy analytics
- Automatic Transfer Switches (ATS) control and failover logic
- Strong proficiency in control theory, system modeling, and simulation tools (MATLAB/Simulink)
- Experience with industrial protocols (Modbus, BACnet, OPC UA, Ethernet/IP)
- Familiarity with NFPA, IEC, and ISO standards related to control systems and safety.
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight as part of a global team
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices while mentoring less experienced engineers
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Excellent problem-solving skills and attention to detail
- Experience in EPlan, WindChill, SolidWorks, and DevOps are a plus
- Experience with hyperscale or colocation data center environments
- Familiarity with low and medium-voltage systems
Preferred Qualifications:
- Master’s Degree in Electrical Engineering or a relevant engineering discipline
- Active Professional Engineer (PE) license
- Experience in mission-critical environments such as data centers, manufacturing, or energy systems.
- Experience with digital twin modeling and predictive maintenance strategies.
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
- Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
- Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
- Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
- Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
- Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
- Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
- Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
- Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
- Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
- Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
- Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
- Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
- Lead mechanical design reviews and contribute to cross-functional design validation efforts.
- Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
- Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
- Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
- Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
- Conduct root cause analysis and corrective actions for mechanical failures or field issues.
- Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
- Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
- May perform other duties and responsibilities as assigned
How will you get here?
Education:
- Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience:
- 8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
- Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
- Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
- Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
- Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
- Excellent interpersonal and communication skills
- Creative, self-motivated, accountable, and team-oriented
- Able to work independently with minimal oversight
- Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
- Skilled in writing reports, business correspondence, and procedural guides
- Effective at presenting information and responding to management, clients, and public queries
- Capable of influencing others and sharing best practices
- Comfortable working as part of a global team
- Capable of assessing projects, articulating risks, and developing project milestones
- Familiar with stage-gate processes in project lifecycle management (PLCM)
- Able to mentor less experienced engineers
- Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
- Master’s Degree in Mechanical Engineering
- Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
- Active Professional Engineer (PE) license.
- Knowledge of regulatory and safety standards applicable to data center infrastructure.
- Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family : Mechanical Design Engineering
Organization : Data Center Infrastructure Team
Location : Remote* OR Austin, TX
*Requires up to 20% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education :
~ Bachelor’s Degree in Mechanical Engineering or related engineering discipline.
Experience :
~8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
~ Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
~ Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
~ Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
~ Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master’s Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
Job Family: Mechanical Design Engineering
Organization: Data Center Infrastructure Team
Location: Remote* OR Austin, TX
*Requires up to 30% domestic and/or international travel (rare)
How will you make an impact?
We are seeking a highly skilled, technically proficient and detail-oriented Principal Mechanical Engineer with expertise in metal structures, frame design, pipes and fabrication to support the development of power and cooling infrastructure for data centers. This role is critical in designing robust mechanical systems that house and support electrical and thermal management equipment, ensuring structural integrity, manufacturability, and compliance with industry standards.
What will you do?
Experience designing and integrating hydronic systems including pumps, piping networks, valves, and heat exchangers for data center cooling applications.
Knowledge of fluid dynamics, pressure drop calculations, and pipe sizing for chilled water and glycol-based systems.
Understanding of installation constraints, maintenance access, and serviceability in large-scale mechanical infrastructure.
Design and develop mechanical frames, enclosures, and support structures for data center power and cooling products (UPS systems, battery racks, CRAC units, containment systems, LVS, MVS).
Perform advanced structural analysis using FEA tools to validate mechanical integrity under static, dynamic, seismic, and thermal loads.
Analyze load paths, stress concentrations, and fatigue life of structural components to ensure long-term reliability.
Design metal enclosures with considerations for airflow, thermal containment, EMI shielding, and environmental protection.
Evaluate and implement new materials, coatings, and fabrication technologies to enhance product performance and reliability.
Participate in customer engagements and site visits to understand deployment constraints and gather feedback for design improvements.
Create detailed CAD models and fabrication drawings, including weldments, sheet metal, and machined parts
Select appropriate materials and fabrication methods to optimize cost, performance, and reliability
Collaborate with electrical, thermal, and systems engineering teams to integrate mechanical designs with functional components.
Lead mechanical design reviews and contribute to cross-functional design validation efforts.
Develop and maintain design documentation including BOMs, specifications, test plans, and engineering change orders (ECOs).
Drive continuous improvement in mechanical design for manufacturability (DFM), cost reduction, and performance optimization.
Interface with suppliers and customers to resolve fabrication issues and ensure quality standards are met.
Support lifecycle management of mechanical components, including obsolescence planning and alternate sourcing.
Conduct root cause analysis and corrective actions for mechanical failures or field issues.
Ensure mechanical designs support airflow management, thermal containment, and integration with cooling systems (in-row cooling, rear door heat exchangers).
Collaborate with compliance and certification teams to ensure mechanical designs meet global regulatory requirements (UL, CE, RoHS, REACH)
May perform other duties and responsibilities as assigned
How will you get here?
Education:
Bachelor's Degree in Mechanical Engineering or related engineering discipline.
Experience:
8+ years of experience in mechanical design and fabrication, preferably in data center, industrial, or power systems environment.
Proficiency in CAD tools (SolidWorks, Creo, Inventor) and FEA software (ANSYS, Abaqus).
Strong knowledge of metal fabrication processes including welding, sheet metal forming, and machining is a must
Experience with structural design for heavy equipment or large assemblies, and familiarity with thermal and airflow considerations in enclosure design is required
Excellent communication and cross-functional collaboration skills
Knowledge, Skills, Abilities:
Excellent interpersonal and communication skills
Creative, self-motivated, accountable, and team-oriented
Able to work independently with minimal oversight
Proficient in reading, analyzing, and interpreting general business publications, professional journals, technical procedures, and government regulations
Skilled in writing reports, business correspondence, and procedural guides
Effective at presenting information and responding to management, clients, and public queries
Capable of influencing others and sharing best practices
Comfortable working as part of a global team
Capable of assessing projects, articulating risks, and developing project milestones
Familiar with stage-gate processes in project lifecycle management (PLCM)
Able to mentor less experienced engineers
Ability to travel both domestically and internationally up to 30%
Preferred Qualifications:
Master's Degree in Mechanical Engineering
Experience designing mechanical systems for data centers, telecom, or industrial power/cooling products.
Active Professional Engineer (PE) license.
Knowledge of regulatory and safety standards applicable to data center infrastructure.
Hands-on experience with prototype fabrication and testing; Experience working with global suppliers and contract manufacturers a plus
Remote working/work at home options are available for this role.
