Engineering Journal Jobs in Redmond
96 positions found — Page 6
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington.
As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks.
This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements.
You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank.
Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications.
Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities : Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers.
Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications.
Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations.
Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments.
Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications.
Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications.
Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.
Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors.
Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required.
Use precision measuring instruments to verify that quality standards are achieved.
Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures.
Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required .
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.
Basic Qualifications (Required Skills/Experience): 1 years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.
1 years experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1 years of experience using high impact vibratory tools; such as bucking/riveting.
Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.
Ability to lift up to 35lbs.
Ability to work in Confined Spaces (work within or pass through).
Entry diameter 9.5”X17.7”.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications : 1 years of experience performing aircraft structural work or equivalate.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace : Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift : This position is for a variety of shifts.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent .
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations .
Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
10, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Painter Spray A -Major Assemblies to join our Joint and Installation team in Everett and Renton, Washington.
As a Painter Spray A
- Major Assemblies, you will be essential in ensuring the highest standards of quality and safety in the painting process for our aircraft.
Your role will involve collaborating with team members to complete painting assignments while meticulously preparing surfaces to guarantee proper adhesion and finish.
You will utilize various paint materials and techniques, including both spray and brush methods, to achieve flawless results that meet inspection requirements.
Your attention to detail will be critical as you clean and service equipment, mask areas for painting, and coordinate with safety and environmental teams to ensure a compliant work environment.
Additionally, you will operate automated spray equipment and curing ovens, monitoring conditions to maintain optimal performance throughout the painting process.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Collaborate with employees of varying classifications to ensure the completion of painting assignments for aircraft, missiles, or space vehicles.
Perform touch-up and pickup painting using both spray and brush techniques, adhering to inspection requirements.
Prepare surfaces to ensure proper adhesion, including corrosion removal and paint stripping as needed.
Prepare various paint materials, such as primers, enamels, and lacquers, according to specifications.
Clean and service spray guns, paint tanks, brushes, hoses, and related equipment after use.
Mask and unmask areas to facilitate corrosion removal or painting operations.
Set up all necessary equipment and supplies for painting operations, including fall protection and protective equipment.
Coordinate with safety, environmental, and fire organizations to ensure the shop is prepared for painting operations.
Operate automated spray equipment, such as robots, for preparation and painting tasks.
Operate curing ovens and monitor related equipment to ensure compliance with specifications, including temperature and humidity.
Monitor and maintain time-sensitive materials and processes throughout the painting operation.
Support customer inspections as required and screen work instructions to ensure proper workflow.
Apply decals, part markings, and wrap finished parts or assemblies as required.
Recognize and report any discrepancies or malfunctions in equipment or processes per established procedures.
Obtain and maintain necessary certifications and qualifications for the role, and perform established autonomous maintenance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process.
Failure to complete the assessment will remove you from consideration.
Basic Qualifications: 1 years of experience in prepping, cleaning, and painting various surfaces in industrial, commercial, or academic settings.
1 years of experience using various types of paint equipment and applicators, such as HVLP, pneumatic, electrostatic, and others.
1 years of experience mixing paints.
1 years experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
1 years of experience handling chemicals and/or hazardous materials Experience working from heights & using fall protection equipment with weight limitations.
Preferred Qualifications: 1 year of experience performing aircraft or autobody painting and finishing operations.
Completed 1 year of autobody paint/collision repair in high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement: This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range : $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
31, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electrical Systems- Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
We are seeking a skilled Aircraft Electrical Systems Installer to join our dynamic team.
In this role, you will be responsible for assembling and installing aircraft electrical systems, equipment, and accessories to meet stringent quality requirements.
Your expertise will ensure that all electrical components are accurately located and installed, contributing to the overall safety and performance of our aircraft.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities Assemble and install aircraft electrical systems, equipment, and accessories in the airplane and/or specific sections, adhering to quality requirements.
Locate points, parts, holes, wire bundles, assemblies, etc., using previously established, marked, or generally known station lines or index points, deriving measurements and related information from electrical specifications and authorized sources.
Conduct continuity checks to ensure proper functionality of electrical systems.
Utilize prints, changes, schematic drawings, documents, position boards, assembly pages, photographs, makeup charts, work orders, and production illustrations to complete assigned tasks.
Execute any necessary pickups, authorized changes, and rework independently or on comparable work, often without the use of wire forming boards, jigs, fixtures, or tooling.
Typically assigned work that has been previously sequenced.
Select appropriate parts, materials, tools, assemblies, and shields to effectively accomplish work assignments.
Report job handicaps, such as errors in sequencing, parts, materials, wire sizes and types, and assembly procedures, in accordance with shop procedures outlined by the supervisor.
Perform hand forming of electrical wiring and soldering as required to complete work assignments.
Carry out mechanical work when it is similar in complexity and incidental but necessary for the efficient completion of work assignments.
Execute necessary riveting tasks as part of the assembly process.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications 1 years of experience in electrical assembly installation.
1 years of experience with safety process and/or procedures in a manufacturing or operations environment (LOTO).
1 years of experience handling chemicals and/or hazardous materials.
Ability to recognize colors.
Ability to work in confined spaces.
Ability to support frequent standing, walking, lifting, and working at heights with or without equipment assistance.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications: 1 years of experience as an Electrician or Apprentice.
Completion of an electrical trade school program or have military related electrical experience.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Jul.
09, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
TEKsystems is partnering with a client looking for a highly experienced Network Engineer with at least seven years of industry experience and strong expertise in large‑scale DWDM deployments and optical networking technologies. The ideal candidate will have deep knowledge of IP networking fundamentals, including hands‑on experience with routing protocols such as BGP and OSPF, as well as major router platforms like Cisco 37xx, 49xx, 65xx, 73xx, and 76xx. They should excel in network analysis and troubleshooting while demonstrating broad familiarity with technologies such as IPv4/IPv6, HSRP/GLBP, PIMv2, IGMP, LDP, IPSEC, DNS, and more. Candidates must also be comfortable using command‑line tools, reading and modifying Python or automation‑related code, and discussing automation solutions for configuration, deployment, and network optimization. Additional strengths include DWDM UI familiarity, Linux experience, and competency with optical components such as amplifiers, transponders, multiplexers, and Raman/EDFA systems.
Job Type & LocationThis is a Contract position based out of Seattle, WA.
Pay and BenefitsThe pay range for this position is $60.00 - $75.00/hr.
Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:
• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)
This is a fully onsite position in Seattle,WA.
Application DeadlineThis position is anticipated to close on Mar 26, 2026.
h4>About TEKsystems:We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.
The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
About TEKsystems and TEKsystems Global Services
We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .
The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.
Stationary Engineer / Boiler Operator
Keep critical systems running. Power what matters.
Position Summary:The Stationary Engineer plays a critical role in operating, maintaining, and repairing boilers, chillers, HVAC systems, electrical distribution centers, emergency power systems, and other essential mechanical systems that keep the facility running safely and efficiently. Key Responsibilities:- Operate and maintain utility systems providing heat, steam, hot water, humidification, electricity, and more.
- Monitor system performance using gauges, meters, and Direct Digital Building Control (DDBC) systems, making adjustments to optimize efficiency and safety.
- Perform testing and treatment of boiler and feed water systems.
- Keep detailed logs and records of system operations and maintenance activities.
- Respond quickly to alarms and service calls, ensuring minimal downtime and prompt resolution.
- Maintain equipment in top operating condition through preventive maintenance and repairs.
- Supervise and coordinate tasks with other support personnel as needed.
- For Navy Hospital assignments: Provide after-hours and weekend support for the hospital's 'trouble desk' and manage additional systems like medical air, medical gases, chillers, and emergency power systems.
- Minimum 4 years of experience operating and maintaining power boilers, or completion of a recognized technical or apprenticeship program with at least 3 years of related experience.
- Proficiency in automatic boiler controls and Direct Digital Building Control systems (minimum 1 year experience required).
- Skilled in water testing and treatment for boiler operations.
- Experience with large-scale facility systems preferred (especially in healthcare or government settings).
- Fourth Class Power Engineer Certification Program of the National Institute for the Uniform Licensing of Power Engineers, Inc (NIULPE), Third Class Power Plant Operating Engineer Certification Program of the American Society of Power Engineer, Inc. (ASOPE), or a Grade II Steam Engineer certification from City of Seattle/Tacoma/Spokane, or higher.
- Must meet company and government physical and security requirements, including respirator qualification and clearance eligibility.
- Valid state-issued driver's license with acceptable driving record.
- U.S. Citizenship required.
- Ability to pass government-mandated background checks and drug screenings.
- For Naval Hospital assignments: Proof of Rubella immunity and TB test within the past 12 months required prior to employment.
- Lift up to 10 lbs regularly and up to 50 lbs occasionally.
- Frequent use of hands/arms and clear communication.
- Periodic standing, walking, climbing, kneeling, and crawling.
- We provide reasonable accommodations for qualified individuals with disabilities.
You'll be part of a skilled, supportive team where your expertise truly matters. Every day brings something new and your work keeps people safe, comfortable, and operational.
Ready to power up your career?
Apply today and become a vital part of our operations team.
Equal Opportunity Employer This job description may change as organizational needs evolve.
Compensation details: 45.74-45.74
PI0bf87e6c870f-26289-39333496
The Seattle office of WSHB (located in Kirkland) is looking for 3-4 year associate applicants for its expanding insurance coverage litigation practice group. You must be admitted to the Washington State Bar - no exceptions.
WSHB attorneys handle a wide-spectrum of matters. On a daily basis, associates work closely with lead attorneys on all phases of litigation from case evaluation and reporting, discovery and depositions, through trial presentation, with an emphasis on strategic thinking to meet client objectives. Recognized nationally for its commitment to diversity and an inclusive atmosphere, WSHB and the Seattle office provides attorneys a flexible work from home policy and the opportunity to collaborate with lead attorneys across offices as well as across a variety of practice areas. Excellent research and writing skills are a must. Join an innovative firm and team of attorneys with a reputation for professional excellence that offer the flexibility and casualness of the modern legal practice.
Benefits include:
- A competitive salary package, including the potential for bonuses
- Insurance including medical, dental, vision, disability, life, and a flexible spending account
- 401(k) retirement plan
- Unlimited PTO
- A flexible work from home policy
- Professional development assistance
- Mentorship program
- Referral program
Salary depends on experience.
Recruiters - Please do not contact us as we are not using external recruiters to fill this position at this time.
KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA.
About Us
We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.
As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.
Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team!
The Role
As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business.
You’ll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients.
Key Responsibilities:
- Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations.
- Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors.
- Conduct site investigations, condition assessments, and provide design and construction support.
- Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems.
- Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner.
- Preparation and review of reports.
- Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met.
- Edit and prepare design specifications.
- Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
- Perform other duties as assigned.
About You
To fill the role, we’re looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include:
- Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset.
- Minimum of 7-15 years of experience in mechanical engineering.
- Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire.
- Previous consulting experience is preferred, but not required.
- Excellent verbal and written communication skills are required.
- Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously.
- Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated.
- Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks.
- Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information.
- Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred.
The salary range for this position is $110,000-$160,000
Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.
KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.
KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.
*Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*
KGS Group is looking for an Electrical Engineer to join our Bellevue, WA or Granite Bay, CA.
About Us
We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We’re different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right.
As an employee-owned company, we’re invested in our work and our people. Working with us means you’ll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you’ll have countless opportunities to learn and grow.
Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team!
The Role
As an Electrical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead and mentor teams, support management of production and coordinate delivery of engineering work products often with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business.
You’ll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out inspections for rehabilitation projects for dams and hydroelectric facilities. Your particular focus will be design delivery and mentorship, but you will also be involved in the proposal process. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers.
Key Responsibilities
- Provide input to those managing and executing multiple projects (small to large) from the proposal stage through to completion
- Establish connections with other departments to support and enhance service delivery
- Work collaboratively with other disciplines and multidisciplinary project teams to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met
- Mentor junior staff
- Design modifications to, or entirely new electrical, instrumentation, and controls systems related to dams, control structures, water retaining structures, switchyards and hydroelectric generating stations
- Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner.
- Manage and execute multiple projects from the proposal stage through to completion; Projects will include a variety of small to large projects involving water resources, flood control and hydroelectric sectors
- Prepare and review reports
- Perform calculations
- Conduct inspections and support project work on site as required
- Edit and prepare design specifications
- Conduct QA/QC reviews and facilitate the KGS’s QA/QC process.
- Contribute to the development of the electrical engineering practice at KGS by assisting the electrical design leadership by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks.
- Perform other duties as assigned
About You
To fill the role, we’re looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include:
- Minimum of a Bachelor of Science (BS) degree in electrical engineering from a recognized university; A post-graduate degree is an asset
- Minimum of 7-15 years of experience in electrical engineering with demonstrated project management skills (tracking budgets and meeting schedules)
- Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states via comity within three months of starting.
- Previous consulting experience is preferred but not required.
- Excellent verbal and written communication skills
- Candidate must be self-motivated, and able to work independently with minimal supervision
- Must be able to effectively assume a lead role as project engineer and communicate project and technical information with clients
- Demonstrated experience in site investigations, condition assessments, design and construction support are preferred
- Experience with station service distribution (all voltages), medium voltage equipment, fixed bus power distribution systems, Programmable Logic Controller (PLC) automation (for equipment control), generators and transformers including related monitoring systems, communication systems, system grounding, hoists and gate automation and balance of plant systems for hydroelectric stations preferred, but industrial experience will be considered
- Experience with the following would be considered an asset:
- Backup power systems (including Uninterruptible Power Supply (UPS), Direct Current systems and fuel fired backup)
- Lighting (including emergency and exit lighting systems)
- Fiber and copper structured cable systems, and associated networking equipment
- Distributed Control System (DCS) and PLC Automation, Human Machine Interface (HMI) and Remote Terminal Unit (RTU) integration (including any programming experience)
- Protection systems experience, including specifying, setting and verifying (include reference to voltages)
- Load flow analysis, system modelling, arc-flash, grounding, and other electrical studies (include reference to software used and any training)
- North American Electric Reliability Corporation (NERC)/Critical Infrastructure Protection (CIP) planning
- Physical or cyber security planning or design
- Unit outage planning
- Other renewable energy experience
- Travel to project sites is usually limited but is required depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated.
- Must possess a valid driver’s license and the ability/willingness to undergo security clearance checks
- Have the drive, attitude and commitment to being an active participant in our employee-owned culture is a must
The salary range for this position is $120,000 to $155,000 annually.
Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate’s experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization.
KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package.
KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process.
Check out more information about Prime Air on the About Amazon blog: Prime Air (PA) is seeking a Sr. Technical Program Manager to oversee the development of software functionality within our ultra-fast drone delivery operations.
This role will be responsible for ensuring high standards for certifying airborne systems, working closely with design and systems engineering staff powering a flywheel of continuous improvement in drone design and system integration.
Partnering with the drone system development and various engineering disciplines, you will oversee software and hardware development, verification and validation, configuration management, and quality assurance to ensure compliance to Design Assurance Levels and software development standards. Strong cross-functional engineering fundamentals skills are essential, as well as strong technical communication and documentation skills. Your ability to translate complex system functions into digestible insights and summarize effectively with stakeholders at all levels will be critical to success in this role.
This position may require a deemed export control license for compliance with applicable laws and regulations. Placement is contingent on Amazon's ability to apply for and obtain an export control license on your behalf.
Key job responsibilities
Key job responsibilities
- Own and drive system-level milestone tracking and implementation, dependency mapping, and schedule updates.
- Oversee software and hardware development, verification, configuration management, and quality assurance to ensure compliance to Design Assurance Levels and software development standards
- Communicate effectively across all organizational levels, presenting strategies and results to senior leadership and operational partners- 5+ years of technical product or program management experience
- 7+ years of working directly with engineering teams experience
- 3+ years of software development experience
- 5+ years of technical program management working directly with software engineering teams experience
- Experience managing programs across cross functional teams, building processes and coordinating release schedules- 5+ years of project management disciplines including scope, schedule, budget, quality, along with risk and critical path management experience
- Experience managing projects across cross functional teams, building sustainable processes and coordinating release schedules
- Experience defining KPI's/SLA's used to drive multi-million dollar businesses and reporting to senior leadership
Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.
Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.
The base salary range for this position is listed below. Your Amazon package will include sign-on payments and restricted stock units (RSUs). Final compensation will be determined based on factors including experience, qualifications, and location. Amazon also offers comprehensive benefits including health insurance (medical, dental, vision, prescription, Basic Life & AD&D insurance and option for Supplemental life plans, EAP, Mental Health Support, Medical Advice Line, Flexible Spending Accounts, Adoption and Surrogacy Reimbursement coverage), 401(k) matching, paid time off, and parental leave. Learn more about our benefits at , WA, Seattle - 148,7 ,200.00 USD annually
Hello Folks,
I have multiple job requirements for Robotics Engineer and a Controls engineer role.
Location: Redmond, WA (100% Onsite role)
Contract Role : 12 + months
PFB description with roles:-
- Principle Robotics Engineer - Architect - ROS2, sensor fusion, navigation, manipulation, command and control, vslam, fleet management, orchestration, LLM, VLM, VLA, proprioception
- Sr Robotics Engineer - Manipulation - ros2, sensor fusion, MV, manipulation, VLA's, proprioception, control systems
- Sr Robotics Engineer - Navigation - ros2, sensor fusion, MPC, MV, behavior engines, object avoidance
- Sr Robotics Engineer - Simulation - Ideal Isaac Sim, URDF, 19+ DOF, sim2real, real2sim, data engineering, RL
- Sr Robotics Engineer - End Effectors - simulation, 9+ DOF control schemes, RL, VLA
- Robotics Engineer - Release - bringing robotics systems to the real world, on site deployment support, direct customer engagement, troubleshooting and resolving issues on the spot, holistic system understanding
- Experience in FIRST, VEX or other programs is a huge benefit.
- Hands on construction trade experience is desired.
Controls Engineer Role
Role Overview
We are seeking a hands-on Controls Engineer with strong PLC programming, multi-protocol industrial networking, and manufacturing/production system experience to support deployment, optimization, and reliability of automated equipment and robotic workcells. This role will work closely with hardware, reliability, and commissioning teams to take systems from integration through production-scale operation.
Key Responsibilities
- Design, develop, and maintain PLC-based control systems for automated manufacturing and material-handling equipment.
- Program and troubleshoot using IEC 61131-3 languages (Structured Text preferred).
- Integrate motion systems, conveyors, robotics, and safety subsystems into cohesive control architectures.
- Work across multi-protocol industrial environments including EtherCAT, OPC-UA, Modbus, BACnet, and similar fieldbus/OT networks.
- Support system bring-up, FAT/SAT, commissioning, and production deployment activities.
- Partner with Reliability Engineering teams to analyze failures, perform root-cause analysis, and harden systems for uptime and scalability.
- Configure and integrate servo drives, safety PLCs, industrial PCs, and distributed I/O.
- Perform diagnostics, log analysis, and performance validation of automated systems.
- Contribute to continuous improvement of automation platforms through code refactoring, version control, and CI/CD workflows.
- Interface with cross-functional teams including mechanical, vision, software, and operations to ensure production readiness.
If interested in the above please share the below:-
- Your Updated Resume with contact details
- Your minimum hourly expectation :________
- Your availability to connect on call. ___________
- Work Authorization._______
