Engineering Journal Jobs in Pa

We're seeking a knowledgeable and detail-oriented Heat Treat Process Engineering Supervisor to lead and support all aspects of the heat treatment operations with a focus on quality, compliance, and continuous improvement.

POSITION SUMMARY:

The Heat Treat Process Engineering Supervisor serves as a technical expert responsible for ensuring the proper thermal processing of materials to meet metallurgical and production requirements meeting all CQI-9 requirements. This role includes overseeing furnace operations, audits, documentation, process control, equipment maintenance, and continuous improvement initiatives.

The ideal candidate will have strong metallurgical knowledge, heat treat process experience, the ability to troubleshoot equipment and process issues, and the ability to manage compliance in a dynamic manufacturing environment. This role has direct supervisory responsibility for Lab Technicians, including scheduling, performance management, training, and ensuring compliance with laboratory testing standards and metallurgical validation requirements.

ESSENTIAL DUTIES (Complete):

• Oversee and manage daily heat treat operations including carburizing, hardening, tempering, and stress relieving
• Ensure compliance with AIAG CQI-9: Heat Treat System Assessment (HTSA) and other applicable standards
• Implement and maintain heat treat process control plans per AIAG guidelines
• Conduct and lead CQI-9 self-assessments, audits, and ensure closure of gaps and non-conformances
• Ensure proper setup, calibration, and operation of furnaces and quench systems
• Monitor thermal cycles and maintain control charts, pyrometry data, and process records per CQI-9
• Support system accuracy tests (SAT), temperature uniformity surveys (TUS), and instrumentation calibration activities
• Ensure all documentation meets internal and customer-specific AIAG compliance requirements
• Collaborate with Engineering, Maintenance, and Quality to address process improvements and problem-solving
• Perform metallurgical inspections including hardness testing and microstructure verification
• Provide technical guidance to operators and maintenance personnel on best practices
• Develop and optimize heat treat process parameters including atmosphere control, quench severity, and thermal cycle design to meet metallurgical and dimensional requirements
• Atmosphere verification (Carbon Potential, Dew Point, etc.)
• Distortion Mitigation Strategy
• Develop, implement, and maintain training programs to ensure team competency on heat treat systems and compliance
• Lead root cause analysis and corrective action efforts for heat treat-related non-conformities
• Utilize Lean Six Sigma principles to drive cost reduction, efficiency, and quality improvements
• Maintain proper traceability and process documentation for internal and external audits
• Provide technical direction for furnace troubleshooting, repair validation, and upgrade initiatives in coordination with Maintenance
• Perform other duties as assigned or required in support of production and quality goals
• Directly supervise Lab Technicians, including daily work assignments and workload balancing
• Approve timecards, PTO, and manage attendance
• Perform other duties as assigned or required in support of production and quality goals

CORE COMPETENCIES:

• Action oriented: Demonstrates ownership in solving process and compliance issues
• Self-Motivated: Demonstrates ability to take initiative and drive to achieve results. Proactively drives conformance with CQI-9 requirements and continuous improvement
• Accountability: Demonstrates ability to take responsibility and maintains sense of ownership and follow through on commitments. Sets high standards of performance.
• Communication: Demonstrates ability to convey and distribute information effectively and encompass strong speaking, presentation, written and listening skills. Ability to create an environment for open communication, and communicates clearly across departments regarding heat treat and compliance status
• Teamwork: Demonstrates ability to work well with others to accomplish common goals and build a positive climate and trusting relationships within teams.
• Leadership: Demonstrates ability to give direction, motivate, manage and reward performance, provide constructive feedback and foster individual professional development. Trains and guides operators to follow standard operating procedures and compliance guidelines
• Reliability: Demonstrates dependability, accountability and trust. Follows processes and meets commitments. Delivers consistent process performance and regulatory documentation
• Decision-making: Demonstrates ability to discover opportunities in challenges, seek profit and sustainable growth, make courageous while sound decisions and demonstrate a good business understanding. Applies analytical skills and CQI-9 knowledge to make data-driven decisions

KNOWLEDGE, SKILLS & ABILITIES:

• Thorough understanding of heat treatment principles, metallurgy, and thermal processing equipment
• Working knowledge of CQI-9 audits, checklists, gap closures, and AIAG documentation practices
• Familiarity with control system troubleshooting, PLCs, HMIs, and data logging
• Ability to supervise, mentor, and train heat treat personnel on compliance, safety, and process controls
• Skilled in conducting microstructure analysis and hardness testing to validate process results
• Strong organizational and record-keeping skills for always maintaining audit-readiness
• Proficiency in Lean Manufacturing, 5S, and Continuous Improvement
• Physically capable of working in a high-temperature, industrial environment
• Commitment to upholding process integrity and product conformance to specification

WORKING ENVIRONMENTAL CONDITIONS:

• Work involves exposure to high-temperature equipment, hot surfaces, and industrial environments. May encounter fumes, noise, and moving machinery. Personal protective equipment (PPE), including heat-resistant gloves, face protection, and hearing protection, is required. Occasional exposure to quenchants, chemicals, and elevated platforms is expected. Safety training and environmental awareness are critical components of the role.

SUPERVISORY RESPONSIBILITY:

• This role has direct supervisory responsibilities.

The demands described here represent those that an employee must meet to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions.

QUALIFICATIONS:

• Bachelors degree in Mechanical, Materials, Metallurgical, or Manufacturing Engineering required.
• Materials Science or Metallurgical Engineering preferred
• 7+ years of hands-on heat treat or metallurgical experience, preferably in automotive or aerospace manufacturing
• Demonstrated knowledge and application of CQI-9 Heat Treat System Assessment requirements
• Familiarity with AIAG standards and automotive core tools (APQP, PPAP, FMEA, SPC, MSA)
• Experience conducting and documenting SAT, TUS, and other pyrometry-related activities
• Experience operating batch and continuous furnaces, quench systems, and thermal processing equipment
• Demonstrates ability to directly supervise lab personnel including assigning work, evaluating performance, managing corrective actions, and developing team capabilities.
• Creates accountability, enforces standards, and drives measurable performance improvements.
• Proficient in hardness testing, blueprint reading, GD&T, and metallurgical inspection techniques
• Strong computer skills including Microsoft Office and plant data collection systems
• Excellent troubleshooting, documentation, and analytical skills
• Commitment to safety, quality, and environmental standards
• Ability to lead and train team members on technical and compliance-related topics
• Ability to work independently, manage multiple tasks, and prioritize effectively

Compensation details: 96 Yearly Salary

PI34bc9acf25ca-26289-39818891

Biomedical Equipment Engineering Manager

Philadelphia, PA (Onsite)

Salary: $145,000 + Full Benefits

Full-Time | Leadership Role

We are seeking a Biomedical Equipment Engineering Manager to lead the maintenance, troubleshooting, and operational reliability of medical equipment across a hospital environment in Philadelphia, PA. This is an onsite leadership role responsible for overseeing biomedical engineering operations, ensuring critical medical devices remain safe, compliant, and fully operational to support patient care.

This position will supervise biomedical equipment technicians and engineers while collaborating closely with clinical staff, hospital leadership, and vendors to maintain high standards for equipment performance, safety, and regulatory compliance.

The ideal candidate will bring a strong background in hospital-based biomedical equipment maintenance, medical device troubleshooting, and team leadership within a clinical environment.

Key Responsibilities

• Lead and manage a team of Biomedical Equipment Technicians (BMETs) and Biomedical Engineers responsible for hospital equipment maintenance and support

• Oversee preventive maintenance, repair, and calibration programs for a wide range of medical devices and clinical equipment

• Troubleshoot complex issues involving diagnostic, therapeutic, and patient monitoring equipment

• Ensure all equipment maintenance activities meet hospital regulatory requirements and accreditation standards including Joint Commission and FDA guidelines

• Develop and manage equipment lifecycle planning, including replacement strategy and capital equipment upgrades

• Coordinate with clinical departments to ensure equipment availability and minimize disruption to patient care

• Manage relationships with OEM vendors and third-party service providers for specialized repairs and service contracts

• Implement reliability improvements and maintenance best practices to increase equipment uptime and operational efficiency

• Maintain accurate records and documentation within CMMS / biomedical asset management systems

• Support new medical equipment installations, system integrations, and facility expansion initiatives

• Ensure compliance with hospital safety standards and biomedical engineering best practices

Required Qualifications

• Bachelor’s degree in Biomedical Engineering, Electrical Engineering, or related field

• 5+ years of biomedical equipment experience within a hospital or healthcare system

• 2+ years of leadership or supervisory experience managing biomedical technicians or engineers

• Strong expertise in medical device troubleshooting, maintenance, and preventive service programs

• Experience supporting equipment such as patient monitors, imaging systems, infusion pumps, anesthesia machines, ventilators, and diagnostic equipment

• Knowledge of Joint Commission standards, FDA regulations, and healthcare compliance requirements

• Experience using CMMS or biomedical equipment management systems

Preferred Experience

• Experience managing biomedical operations across multiple departments or hospital campuses

• Familiarity with network-connected medical devices and clinical technology systems

• Certification such as CBET (Certified Biomedical Equipment Technician) or related biomedical certification

Compensation & Benefits

• $135,000 base salary

• Comprehensive health, dental, and vision benefits

• 401(k) with company match

• Paid time off and holidays

• Opportunity to lead biomedical engineering operations in a mission-driven healthcare environment

The Efficiency Network, Inc. (TEN) is an independent energy-focused design/build contractor that provides building infrastructure upgrades and energy projects services to state, local, and federal government, K-12 education, higher education, healthcare, and large commercial and industrial customers. We help our clients address deferred maintenance, invest in infrastructure, improve the efficiency and sustainability of their buildings, and make their operations more resilient.

TEN applies state of the art technology, engineering, construction and project management concepts and practices, along with creative financing and ownership solutions, to deliver projects quickly and efficiently.

TEN is part of the Duquesne Light Holdings, Inc. family of companies.

Location : Pittsburgh HQ Hybrd 3 -days a week,

Summary:

Reporting to TEN’s Vice President, Engineering, the Director-Design Engineering is responsible for overseeing the development and supporting the delivery of multi-disciplined construction projects. This role ensures that all design outputs meet technical, regulatory, and quality standards while aligning with project objectives and client requirements. The Director – Design Engineering will collaborate closely with internal development, engineering, and construction teams while directing and managing external design professionals (architects and engineers) to translate conceptual designs into executable plan documents and constructable project strategies. The Director – Design Engineering plays a key role in ensuring that projects are designed in a safe and profitable manner and all associated project risks are identified and mitigated.

Location: The successful candidate is situated in the Pittsburgh, PA region and will work from the company’s office and a home-based office with travel to customer sites as necessary.

Responsibilities:

Design Phase Leadership & Commercial Strategy

• Lead and manage internal and external multidisciplinary design teams (architects, engineers, and consultants) through all phases of design within a Design/Build delivery model, from concept development through design completion.
• Define and control design scope, standards, schedules, and deliverables to ensure alignment with project objectives, contractual obligations, and client expectations.
• Lead and participate in commercial negotiations with owners, design consultants, and key trade partners related to design scope, fees, risk allocation, and change management.
• Facilitate design coordination and decision-making with clients, internal stakeholders, and external partners to resolve technical and commercial issues efficiently.
• Oversee development of coordinated, complete, and constructible design solutions that enable accurate pricing, competitive proposals, and predictable construction outcomes.
• Ensure designs comply with applicable codes, regulatory requirements, and owner standards while balancing cost, schedule, quality, and risk considerations.
• Direct preparation and review of design submittals, equipment selections, and technical packages, ensuring commercial alignment and securing required client approvals.
• Validate evolving cost estimates, contingencies, and allowances throughout design development, identifying risks, opportunities, and value engineering options to protect and enhance project margins.
• Proactively identify, assess, and mitigate design-related commercial risks, including constructability, scope gaps, escalation exposure, and design schedule impacts.
• Confirm designs are fully coordinated and commercially executable prior to construction handoff, minimizing downstream changes, claims, and margin erosion.

Construction Phase Design Oversight & Commercial Support

• Serve as the primary design authority during construction, providing technical leadership and commercial support to project managers, superintendents, and field teams.
• Support interpretation of drawings, specifications, and design intent while assessing cost, schedule, and contractual implications of design decisions.
• Review and respond to requests for information (RFIs), submittals, and design clarifications with a focus on minimizing commercial exposure and avoiding schedule disruption.
• Evaluate proposed field changes, substitutions, and value engineering initiatives for technical feasibility, constructability, cost impact, risk allocation, and contract compliance.
• Lead coordination with architects, engineers, design-assist partners, and subcontractors to negotiate and resolve design-related issues encountered during construction.
• Ensure all approved design changes are accurately incorporated into revised documents and as-built records, maintaining alignment with contract requirements.
• Monitor construction activities for adherence to approved design documents.
• Support commissioning, testing, and closeout activities to ensure systems perform as designed and contractual obligations are met.
• Maintain alignment between design intent, construction execution, and financial performance, actively supporting margin protection, change management, and dispute avoidance.

Education and Experience Required:

Required:

• Bachelor’s degree in Engineering, Architecture, or a related field.
• 10+ years of experience in detailed design, estimating, and commercial support within the building construction industry.
• Proven leadership managing multidisciplinary design teams in Design/Build environments.
• Demonstrated success in commercial negotiations with owners, consultants, and trade partners.
• Advanced proficiency in CAD/BIM platforms and design standards.
• Strong working knowledge of building codes, regulatory requirements, and industry best practices.
• Excellent communication, negotiation, problem-solving, and organizational skills with the ability to balance technical and commercial priorities.

Preferred:

• Leadership on large-scale, complex, multi-disciplinary Design/Build projects.
• Direct involvement in contract negotiations, design fee agreements, and change management.
• Strong track record of providing commercial and risk-management support to project delivery teams throughout the project lifecycle.

EQUAL OPPORTUNITY EMPLOYER

Duquesne Light Holdings is committed to providing equal employment opportunity to all people in all aspects of the employment relationship, without discrimination because of race, age, sex, color, religion, national origin, disability, sexual orientation and gender identity or status as a Vietnam era or special disabled veteran or any other unlawful basis, as defined by applicable law, and fostering a workplace free of unlawful discrimination and retaliation. This policy affects decisions including, but not limited to, hiring, compensation, benefits, terms and conditions of employment, opportunities for promotion, transfer, layoffs, return from a layoff, training and development, and other privileges of employment. An integral part of Duquesne Light Holdings' commitment is to comply with all applicable federal, state and local laws concerning equal employment and affirmative action.

Duquesne Light Holdings is committed to offering an inclusive and accessible experience for all job seekers, including individuals with disabilities. Our goal is to foster an inclusive and accessible workplace where everyone has the opportunity to be successful.

If you need a reasonable accommodation to search for a job opening, apply for a position, or participate in the interview process, connect with us at and describe the specific accommodation requested for a disability-related limitation.

Project Coordinator – Capital & Marine Infrastructure

Philadelphia, PA | PhilaPort

Build infrastructure that actually matters.

PhilaPort is seeking a Project Coordinator to support the planning and delivery of complex capital construction projects that keep the region’s maritime economy moving. This role sits at the intersection of engineering, construction management, and public-sector infrastructure, offering hands-on exposure to marine, environmental, and heavy civil projects that are rare in the private market.

If you’re a civil, environmental, or construction engineer looking to grow into large-scale infrastructure work — or deepen your experience in marine construction — this is a unique opportunity to work on projects with long-term regional impact.

What You’ll Do

As a Project Engineer, you’ll support multiple phases of construction projects, from early planning through close-out, working closely with internal teams, consultants, and contractors.

Key responsibilities include:

• Support project managers in developing and maintaining project schedules, budgets, and work plans for active construction projects
• Coordinate day-to-day project activities, tracking progress, resolving issues, and helping keep projects on schedule
• Review construction documents, drawings, and specifications to ensure accurate execution in the field
• Assist with contract administration, including RFIs, submittals, change orders, and scope documentation
• Participate in construction site visits to monitor progress, quality, and safety compliance
• Support cost tracking, estimating, and budget control throughout the project lifecycle
• Maintain project documentation using construction management and engineering software
• Collaborate across engineering, environmental, and operations teams to support permitting, compliance, and stakeholder coordination

What We’re Looking For- You must have your PE License or be ready to sit for the exam.

We’re intentionally casting a wide but qualified net and are open to candidates who bring strong fundamentals and a willingness to learn the marine side of the work.

Required / Core Qualifications

• Experience supporting construction or infrastructure projects in a project engineering or construction management role
• Strong understanding of construction sequencing, drawings, and field coordination
• Ability to manage multiple priorities and collaborate across technical and non-technical teams
• Comfort working in active construction environments and participating in site visits

Preferred (Not All Are Required)

• Background or interest in marine, environmental, or heavy civil construction
• Familiarity with regional permitting or public-sector infrastructure projects
• Bachelor’s degree in Civil Engineering, Environmental Engineering, Construction Management, or a related field
• REQUIRED- PE license, EIT certification, or intent to sit for the PE exam within 6 months
• Experience with tools such as Procore, Bluebeam, Primavera P6, Civil 3D, or similar platforms (training can be provided)

Why This Role at PhilaPort

• Work on high-visibility, mission-critical infrastructure projects
• Gain exposure to marine and port engineering without needing prior specialization
• Stable public-sector environment with long-term capital planning
• Collaborative, team-based project delivery
• Opportunity to build a career in infrastructure that supports regional commerce and environmental stewardship

A Note to Candidates

If you meet most — but not all — of the qualifications, we still encourage you to apply. We value strong engineering fundamentals, curiosity, and a willingness to learn as much as prior marine experience.

Ainsley Search Group is hiring a Plant Engineering Manager with solid experience in plant engineering and maintenance management for a High Growth Manufacturer located in Chester County. This Plant Engineering Manager will report to VP of Operations, lead and develop a maintenance and engineering team and plan, optimize PM, optimize plant reliability and equipment performance output, further promote plant safety, and reliability, oversee the life cycle of major plant engineering projects. This is a full-time, permanent opportunity with lucrative compensation, bonus, benefit and growth.

Responsibilities:

• Lead, manage, mentor, and develop a plant engineering team, plan staffing outlook for maintenance and engineering team based on operational demand and make decision on hiring, training, etc.
• Report to VP of Operations and collaborate with cross functional teams to develop and implement a facility maintenance system, drive PM, reliability, process improvement on safety.
• Lead life cycle of major plant expansion, capital projects, oversee plant engineering projects design, execution, commissioning, close-out, manage contractor, equipment manufacturer, suppliers’ quality, performance and support contractor and supplier selection and qualification process.
• Develop, implement, and standardize maintenance practice, procedure and process across organization, plan and optimize resource for predictive and preventive maintenance, lead and manage plant maintenance programs, oversee equipment inspections, support safety and reliability training to optimize overall plant safety, reliability, and efficiency.
• Manage budget, cost and budget planning for all plant engineering projects, maintenance programs, identify area of cost saving opportunities and drive cost saving initiatives.
• Lead the security, sanitation, janitorial, utility, and property management programs across plant, create and maintain master site plan and collaborate with safety and EHS to ensure compliance with OSHA, GMP and EHS regulations.
• Collect, analyze maintenance data, KPI and operational data to track, monitor up-time, down-time performance on plant systems such as chiller, HVAC, condensate systems, plant steamer, etc, identify root causes and opportunities of improvement, further achieve higher efficiency, accuracy, cost saving on equipment performance output.
• Collaborate with EHS, Reliability Engineer, Project Engineer to support new capex investment, installation, commissioning, upgrade, routine maintenance, repair, and upgrade.
• Collaborate with Process, Quality, Reliability engineering and senior management, based on operational data, analysis to support CI, sustain and promote process safety, equipment reliability, and optimize operational output.
• Collaborate with executive management team on strategic planning regarding plant expansion, major capex investment, maintenance program, etc.
• Lead the new plant site design, development projects from start to finish, develop and modify new plant layout and expanded layout for existing plant facility.

Qualifications:

• Bachelor’s Degree in technical degree is a plus, higher education desired.
• Recent years of tenure as a hands-on senior leader as Plant Engineering Manager, or related roles within manufacturing industry, expose to high yield, fast speed automated manufacturing environment required.
• Hands-on leadership skill, ability to establish rapport and hold subordinates accountable, ability to restructure and develop a team.
• Strong analytical and problem-solving skill, strong knowledge in Project Management skill.
• Strong mindset in process improvement, process safety and reliability, ability to make difficult decision independently.
• Proficient in Microsoft Suite, CMMS and ERP based systems.
• Aspiration to advance to senior management level

Compensation and Benefit:

• Lucrative compensation
• Yearend bonus
• 401k with match
• PTO
• Paid Holidays
• Health, dental and vision
• Life Insurance
• Disability Insurance
• Tuition Reimbursement
• Relocation Assistance

ARM Group LLC is looking for a self-driven and energetic Staff Engineer who is looking to grow and embodies an ownership mentality. The Staff Engineer will collaborate with a team of multi-disciplined engineers and scientists, project managers, CAD designers, and other staff to service our client’s needs. This role will support a wide range of projects related to our Energy & Power practice area in the areas of erosion and sediment control design, stormwater management design, and land development engineering.

The successful candidate will assist in performing engineering calculations, writing reports, and creating/updating design drawings using CAD and assist with client and regulator communications. This role may also support our solid waste management, environmental services, geotechnical engineering, oil and gas, water resources, and construction administration practice areas.

Location: This position can be filled in our Hershey, PA office.

Requirements

• Prepare, review, and update design drawings and investigation reports for commercial/industrial and utility scale solar projects throughout the Mid-Atlantic region.
• Observe and monitor field work to analyze possible problems.
• Perform and/or check technical calculations related to erosion and sediment control design, stormwater management design, and related land development engineering.
• Research code, zoning, ordinances, and other requirements as needed to ensure project compliance.
• Prepare reports, letters, emails, permit applications, etc. for projects.
• Collaborate with other team members to meet deliverables on project and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.

Base Requirements:

• Bachelor's degree or equivalent in engineering (Civil or Environmental) from an accredited four-year college or university.
• Experience with Autodesk Civil 3D or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Desire to work on multiple projects in parallel rather than a single large project for months.
• Proficiency in Microsoft Office Suite.
• Requires travel to job sites and occasionally out of the local area overnight stay.
• Valid drivers license

Preferred Requirements:

• E.I.T. certification preferred, but the opportunity to obtain certification can be developed.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Job Opportunity - Electrical Engineer

Location : New Freedom, PA

Duration : Long term

Position Summary

The Electrical Engineer will support product optimization initiatives through design analysis, component evaluation, simulation, and testing activities. This role involves reviewing existing product designs, identifying opportunities for component standardization, conducting simulations, and supporting testing and troubleshooting of electrical systems, including 3-phase systems. The ideal candidate is detail-oriented, technically sound, and eager to contribute in a collaborative engineering environment.

Key Responsibilities

• Research and analyze existing product designs to identify redundant components and recommend design optimizations.
• Review and analyze Bills of Materials (BOMs) to identify opportunities for component commonization and cost reduction.
• Interpret technical drawings, schematics, and electrical documentation accurately.
• Perform circuit simulations to evaluate the feasibility of component substitutions and validate design changes.
• Participate in testing and troubleshooting of 3-phase electrical systems, proactively identifying and resolving issues under the guidance of senior engineers.
• Utilize test equipment such as oscilloscopes, power analyzers, and related diagnostic tools.
• Maintain comprehensive documentation of design modifications, simulations, test procedures, and results.
• Collaborate with cross-functional teams to ensure design integrity and compliance with applicable standards.

Required Qualifications

• Bachelor’s degree in Electrical Engineering or a related discipline.
• Solid understanding of fundamental electrical engineering principles.
• Strong analytical skills with attention to detail.
• Ability to read and interpret technical drawings, schematics, and BOMs.
• Familiarity with electrical test equipment such as oscilloscopes and power analyzers.
• Knowledge of electrical components and systems.
• Strong communication and teamwork abilities.
• Willingness to learn and adapt in a fast-paced engineering environment.

Preferred Qualifications

• Hands-on experience in electrical testing and troubleshooting, including independent resolution of circuit- and system-level issues.
• Experience with circuit simulation tools such as SPICE or Saber.
• Familiarity with applicable industry standards and regulatory requirements.
• Exposure to 3-phase motors and related systems.

Performs advanced technical/engineering problem solving in support of power plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary duties and accountabilities include:

• Oversee feasibility studies and design activities for new build/commercial projects
• Applies experience to ensure feasibility studies provide accurate assessments of projects and outcomes for business cases
• Coordinate with nuclear & power engineering counterparts to ensure project scope is clearly delineated and understood
• Ensure technical deliverables are reviewed in a timely manner and challenged thoroughly for technical adequacy
• Possess knowledge of design standards/procedures and regulatory guidance applicable to support potential projects that interface with power plant
• Interface with site engineering managers as needed to obtain the information needed to successfully complete assigned projects
• Ensure that engineering activities are conducted in accordance with design standards, company procedures, and regulatory requirements
• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems
• Provide complete task management of engineering issues
• Perform engineering tasks as assigned by supervision applying engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications
• Perform independent research, reviews, studies and analyses in support of technical projects and programs
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations
• Has completed assigned skills and knowledge development training to broaden and deepen knowledge in select areas. Assist/mentor junior engineers on technical issues
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (Department duty coverage and/or call out, and positions outside of department in support of outage activities etc.)

Minimum qualifications include:

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, or mechanical) with 5 years technical experience or related engineering experience
• Maintain minimum access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred qualifications include:

• Proficiency in leading cross functional initiatives at an asset/plant
• Experience overseeing feasibility studies and design activities for new build/commercial projects. Strongly prefer nuclear plant working experience
• Experience working with NRC regulations and standards
• Possess knowledge of design standards/procedures and regulatory guidance applicable to support potential projects that interface with power plants

This position is open from junior to senior levels for candidates with expertise in machinery mechanical design. Don’t hesitate to apply!

Join Us at a Pivotal Moment of Growth

[Doosan Robotics X ONExia] is experiencing an exciting transformation. As a leader in robotic solutions with standard products for palletizing and packaging applications using Robot Arms, we're experiencing rapid expansion and scaling our impact across industries. Our cutting-edge systems—from advanced palletizing and case packing to carton erecting and conveyor solutions—are transforming operations for companies across North America, and we need passionate engineers to fuel our next phase of growth.

The Opportunity

As one of our Mechanical Engineers, you'll be the creative force behind breakthrough automation solutions. You'll take customer concepts and transform them into sophisticated automated machines that solve real-world industrial challenges. This role combines engineering expertise with inventive problem-solving, offering the perfect opportunity for engineers who love bringing innovative ideas to life.

What Your Days Will Look Like:

• Design Work: Spend most of your time doing what you love—creating innovative machine designs using SolidWorks
• Hands-On Work: Get your hands dirty building prototypes, testing concepts, and working directly with the machines you design
• Project Management: Guide projects from concept through completion, ensuring your designs meet customer goals and timelines
• Collaboration: Present your designs to customers and teammates, sharing ideas and refining solutions together

Job Requirements

• B.S. in Mechanical Engineering with 3+ years of hands-on machine design experience
• Understanding of industrial components inside and out—bearings, motors, sensors, gearboxes, and how they work together
• Knowledge of materials, coatings, and machining processes for fabricated parts
• Ability to develop comprehensive machine layouts and specify the right components for each application
• Strong capability to create fabrication and assembly drawings.
• Solidworks experience
• Experience with robots
• Strong attention to detail
• Good communication skills to present design to customers and co-workers
• Strong capability to create fabrication and assembly drawings.

Ready to Be Part of Something Growing?

We're building something special at "Doosan Robotics X ONExia", and we'd love for you to help us do it. If you're ready to combine technical expertise with meaningful customer relationships while growing your career alongside our expanding company, let's talk.

Additional Details:

• Location: Exton, Pennsylvania (750 Springdale Dr, Exton, PA 19341)
• Schedule: Monday-Friday, 8-hour shifts
• Travel: 5-10% (occasional customer sites)
• Benefits

- 401(k)

- 401(k) matching

- insurance (Health, Life, Vision, Dental)

- Flexible schedule

- Paid time off

[Doosan Robotics X ONExia] welcomes applications from all qualified candidates and is committed to creating an inclusive workplace where everyone can contribute their best work.

[Doosan Robotics X ONExia] is an equal opportunity employer committed to creating an inclusive workplace where diverse perspectives drive innovation.

AGE Solutions is seeking an Audio-Visual Command Meeting (AVCM) Engineer. In this role, you will travel within their assigned zone to support Senior Executive Services (SES) and Military Officer conference and meeting spaces. This role provides installation, troubleshooting, and sustainment support for enterprise audio-visual systems and will augment support to other zones as required. The ideal candidate is a hands-on AV professional with strong technical expertise, the ability to lead AV efforts on-site, and experience working in classified environments.

This position is based out of New Cumberland, PA with regional CONUS travel.

Key Responsibilities:

• 
  
• Travel within assigned zone and provide augmentation support to other zones as needed
  
• Support SES and Military Officer conference and meeting spaces
  
• Install, pull, terminate, label, and test all AV-related cables, connectors, and interfaces
  
• Install projection screens, plasma/LED displays, speakers, and related AV hardware
  
• Perform installation of AV systems at client sites, including full room deployments
  
• Read and interpret blueprints, drawings, and technical documentation
  
• Wire and build AV racks to standard and customer specifications
  
• Serve as the Lead Audio Visual Engineer on projects and customer engagements
  
• Manage AV projects across various models and makes of equipment
  
• Conduct testing, analysis, troubleshooting, and corrective actions on systems, networks, hardware, and software
  
• Demonstrate thorough understanding of AV wiring standards and connector types across AV cable types
  
• Support internet-based video solutions including switchers, codecs, interfaces, and room design solutions
  
• Access classified areas to support Enterprise JWICS installation and troubleshooting of system hardware (user account not required)
  

Required Qualifications:

• 
  
• Five (5) years of relevant experience with AV engineering
  
• Have an active DoD Secret clearance at a minimum
  
• Have one (1) of the following certifications:
  
  • 
    
  • AMX Technician (Networked AV) Certification, or
    
  • Crestron CTI Technician Track Certification, or
    
  • AVIXA CTS Certification
    
  
  
  
• Ability to support mission-critical AV/VTC systems under pressure
  
• Demonstrated experience working with:
  
  • 
    
  • Crestron
    
  • Cisco
    
  • Biamp / AMX
    
  • Extron
    
  
  
  
• Willingness to travel throughout the zone as required
  
• Strong troubleshooting skills to quickly diagnose and restore AV/VTC services
  
• Ability to follow escalation procedures and provide status updates and corrective action plans to leadership/PMO
  
• Experience using a ticketing system (e.g., ServiceNow) to document troubleshooting, actions taken, and resolution details
  
• Ability to provide routine ticket updates until closure and document root cause and resolution steps
  
• Ability to provide daily operational status reporting for non-operational rooms, including estimated restoration timelines
  
• Location: This position is onsite at our customer's location in New Cumberland, PA and requires up to 50% travel (CONUS).
  

Compensation: $70,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

This Engineering role can be filled at the Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level

Expected salary range:

• Mid-Level - $95,000 - $106,000
• Sr Level - $128,000 - $143,000

Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.

Primary Purpose of Position

Performs advanced regulatory/licensing/technical problem solving and provides analysis/insights in support of department, nuclear plant and fleet regulatory activities. Responsible for regulatory/technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations as well as Constellation licensing and regulatory processes.

Primary Duties and Accountabilities

• Provide in-depth regulatory/technical expertise to develop, manage and implement regulatory analyses, activities and programs.
• Provide regulatory/technical expertise and consultation through direct involvement to identify and resolve regulatory issues.
• Provide complete task management of regulatory issues.
• Perform regulatory and department related tasks as assigned by supervision
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper licensing basis management and assuring that standard design criteria, practices, procedures, regulations and codes are used in preparation of products.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend new concepts and techniques to improve performance, simplify operation, reduce costs, reduce regulatory burden, correct regulatory non-compliances, or comply with changes in codes or regulations.
• Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.

MINIMUM QUALIFICATIONS for Mid-level E02 Engineer

• Bachelor&rsquos degree in Engineering or equivalent technical degree
• Minimum of 2 years of professional experience
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

MINIMUM QUALIFICATIONS for Senior E03 Engineer

• Bachelor&rsquos degree in Engineering or equivalent technical degree
• Minimum 6 years of professional experience
• Effective written and oral communication skills
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Previous Senior Reactor Operator (SRO) license/certification degree
• Advanced technical degree or related

Key Role Description

The Pipeline Engineer sustains project management and integrity management for reliable operations in compliance with all Federal and State Pipeline Regulations of all pipeline and facility assets. Performs front end studies, cost estimates, detailed design, and construction support of gathering and transmission pipelines & tanks in the MIPC system. Assumes responsibility for pipeline engineering and project management including scope, estimates, schedule and budget. Reviews all proposed construction on the pipeline Right-of-Way and corresponds with property owners. Maintains pipeline GIS system and integrity program. Responsible for the pipeline capital and expense projects, budgeting and forecasting. Maintains and promotes a focus on MIPC's final deliverables and maintains effective communications with other refinery engineering teams.

Role Specific Competencies

At Monroe, we have identified eleven specific competencies we expect all leaders of our organization to possess. These competencies are incorporated as a part of our Selection, Performance Management/Review and Developmental processes. The competencies and activities for this role are detailed below:

Technical Knowledge - demonstrates the specific skills necessary for the assignments, understands the background and points of leverage to be effective in the role.

• 
  
  
• Ensures compliance with federal, state and local regulations, company policy and required integrity inspections and follows/contributes to pipeline industry best practices
  
  
• Sets the example for safety excellence including element owner in MIPC's Pipeline Safety Management System (PSMS), risk management, follow-up and closure of action items, leveraging learnings across the organization.
  
  
• Manages MIPC project work from the development stage through completion to ensure customer satisfaction. Includes project development, bidding, permits, land owner notifications, easements, technical clarifications, contractor oversite, budgeting / forecasting, management of change (MOC), field implementation, inspection oversite and project documentation closure.
  
  
• Owner of the Geographic Information System (GIS) and responsible for the Tech department's updates utilizing previous Risk studies, Field Investigation Reports (IFR's), Cathodic Protection (CP), Integrity, High Consequence Area (HCA) data, Environmental and many other inputs.
  
  
• Assumes budgeting stewardship of OpEx/CapEx as well as interfacing with marketing and general project management oversight.
  
  
• Prepares and maintains design basis and assist with the project planning, scheduling, manpower estimates; Prepares cost estimates including material, equipment, and labor costs.
  
  
• Develops specifications and drawings for construction, utilizing engineering practices, standards, codes and procedures.
  
  
• Prepares bid documents for material, equipment, and construction.
  
  
• Prepares material and equipment requisitions and review vendor drawings and bids to determine compliance with specifications.
  
  
• Consults with construction personnel, concerning design constructability as related to field conditions, sequencing and scheduling of construction activities.
  
  
• Interfaces with the client's technical personnel on specific project design items or tasks
  
  
• Responsible for all equipment design documentation and manages reliability engineering efforts at the Pipeline.
  
  
• Provide technical support and observation services during design and construction.
  
  
• Responds to all Design One Calls submitted to MIPC.
  
  
• Interacts frequently with MIPC Operation, Maintenance & Tech/Regulatory Leads, with key technical and industry trade associations to establish best practices and ensure the facilities are in compliance with all applicable regulations, including participation in trade committees and/or teams.
  
  
• May function with responsibility for monitoring work activities of a project team and ensuring that all project work is performed in accordance with Company procedures.
  
  
• Provides recommendations for system operational improvements through submission of capital and expense projects as part of the annual budgeting process and performs budget re-forecasting as appropriate. Maintains long-term capital budget.
  
  
• Participates in ALL Emergency Response activities, is IC-300 trained (or able to acquire said training w/ MIPC), participates in IC responses and exercises and capable of acting as Planning Section Chief during an incident 24/7/365, or other roles as/where needed.
  
  

• 
  
  
• Leads and promotes a safety culture by ensuring emergency and safety procedures, policies, documentation procedures and equipment operating parameters are within all applicable regulations (DOT and PSMS).
  
  

Knowledge of Work Areas and Responsibilities - demonstrates a clear understanding of role and responsibilities within specific area, flexible and agile in adapting to changes or exploring opportunities and challenges.

Communications - Verbal and Written - includes written and verbal communications, delivers presentations and has good listening skills.

Problem Solving and Conflict Leadership - strives to understand contributing factors, works to resolve complex situations, and helps individuals to resolve conflicts.

Delivering Results - Sense of Urgency - defines appropriate goals, works toward achieving goals, articulates vision and steps for achievement, meets deadlines and provides timely status updates and follow-through.

Teamwork/Cooperation - accountable to team, works to meet established deliverables, appreciates view of team members and is respectful of others.

Initiative - takes action, seeks new opportunities, and strives to see projects to completion.

Work Reliability/Quality - strives to eliminate errors, accurate work is a priority, and seeks opportunities to improve product/services.

Integrity and Trust - honest, accountable, upholds ethics standards and maintains confidentiality.

Minimum Qualifications:

• 
  
  
• Minimum of 5 years' pipeline experience in a high-risk industry.
  
  
• Bachelor's degree in a technical discipline or equivalent project and/or engineering work experience
  
  
• Proficient in Microsoft Office products; prior experience with Maximo & GIS System preferred.
  
  
• Demonstration of successful completion (schedule/cost) of small and/or mid-cap projects
  
  
• Demonstrated proficiency in all of Role Specific Competencies.
  
  

Who We Are As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future.

We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose.

Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success.

At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact.

By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change.

Join us to lead the clean energy future.

Total Rewards Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally.

We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future.

In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

This Engineering role can be filled at the Mid-level or Senior Engineer level.

Please see minimum qualifications list below for each level Expected salary range: Mid-Level
- $95,000
- $106,000 Sr Level
- $128,000
- $143,000 Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.

Primary Purpose of Position Performs advanced regulatory/licensing/technical problem solving and provides analysis/insights in support of department, nuclear plant and fleet regulatory activities.

Responsible for regulatory/technical decisions.

Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations as well as Constellation licensing and regulatory processes.

Primary Duties and Accountabilities Provide in-depth regulatory/technical expertise to develop, manage and implement regulatory analyses, activities and programs.

Provide regulatory/technical expertise and consultation through direct involvement to identify and resolve regulatory issues.

Provide complete task management of regulatory issues.

Perform regulatory and department related tasks as assigned by supervision Accountable for the accuracy, completeness, and timeliness of work ensuring proper licensing basis management and assuring that standard design criteria, practices, procedures, regulations and codes are used in preparation of products.

Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.

Recommend new concepts and techniques to improve performance, simplify operation, reduce costs, reduce regulatory burden, correct regulatory non-compliances, or comply with changes in codes or regulations.

Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.

MINIMUM QUALIFICATIONS for Mid-level E02 Engineer Bachelor&rsquos degree in Engineering or equivalent technical degree Minimum of 2 years of professional experience Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties MINIMUM QUALIFICATIONS for Senior E03 Engineer Bachelor&rsquos degree in Engineering or equivalent technical degree Minimum 6 years of professional experience Effective written and oral communication skills Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties Preferred Qualifications Previous Senior Reactor Operator (SRO) license/certification degree Advanced technical degree or related d24ad0b8-823f-4e68-a892-2986ccdf7392

ARM EnerTech Associates, LLC (AETA) is a wholly owned subsidiary of ARM Group Enterprises Inc. AETA is seeking a self-driven and experienced Sr. Automation Specialist / Electrical Engineer who has a strong business acumen and embodies an ownership mentality. As a Sr. Automation Specialist / Electrical Engineer, you will collaborate with a team of multi-disciplined engineers and scientist, project managers, CAD designers, and other staff to service our Northeast US based clients’ needs. This role will establish client relationships, define client needs, develop winning strategies, prepare proposals, and manage the development, design and permitting of a wide range of projects related to automation, control systems, and control panel design. The successful applicant will be a highly motivated, resourceful, well-organized, and a cooperative producer and manager that is able to meet project goals, schedules, and budgets.

Responsibilities

• Manage and coordinate the development, design, and execution of multiple projects simultaneously.
• Develop project scopes, objectives, proposals, and budgets while effectively communicating with key stakeholders.
• Oversee project schedules, coordinate with subcontractors, and manage resources to ensure timely completion within budget.
• Responsible and accountable for projects including design of industrial controls systems including PLCs, HMIs, SCADA systems, and motor drives.
• Prepare, review, and update design drawings using AutoCAD.
• Support and lead on-site Site Acceptance Testing (SAT), system startup, and training functions related to PLC & HMI hardware and programming.
• Manage projects budgets to ensure they are delivered on time and under budget.
• Collaborate with other team members to meet deliverables on projects and obtain further knowledge and experiences.
• Effectively communicate with key stake holders including project manager, project engineers, and other members of the project team.
• Pro-actively recognize conditions and problems of non-routine nature, develop solutions, and seek guidance when needed.
• Communicate and interface with clients and vendors.
• Writing technical documentation such as: Functional Descriptions, Functional Specifications, Test Documents, Reports, etc.
• Provide mentorship to junior engineers and contribute to technical knowledge-sharing within the team.

Requirements

• 10+ years’ expertise in industrial control systems, PLC/PAC programming, HMIs, VFDs, and SCADA systems.
• Proficiency in Microsoft Office Suite; experience with AutoCAD or equivalent engineering software.
• A self-starter possessing strong communication, planning and organizational skills.
• Comfortable working around energized power distribution equipment and related control systems.
• Requires travel to job sites including overnight stays to provide on-site commissioning, troubleshooting, customer support and training.
• Strong organizational and project management skills with the ability to manage multiple complex projects.
• Excellent communication and leadership skills with the ability to interact with clients and team members effectively.
• A proactive, problem-solving mindset with the ability to work independently and collaboratively.

Preferred Requirements:

• Degree in Electrical Engineering or Computer Engineering.
• Experience in Siemens and Allen-Bradley automation components.
• Knowledge of UL508A Control Panel design and standards.

Your Wellness, Our Priority: A Look at Our Benefits

We invest in our team's well-being and future through a comprehensive benefits package with a range of offerings designed to support you holistically. Our health and wellness offerings include two Health Insurance options (Traditional PPO and QHDHP with an HSA), vision and dental coverage, life insurance, disability protection, accident and critical illness coverage. To enhance your future financial security, we provide a 401(k) with company match, HSA/FSA accounts, and 529 college savings plans. Work-life balance is prioritized through our generous PTO starting at 15 days per year and 10 paid holidays per year, giving you ample time to rest, recharge, and attend to life outside the office. An Employee Assistance Program is provided to you and your household with resources to assist you in managing a variety of situations. We invest in your professional growth through our Tuition Reimbursement program and continuing education opportunities. After 6 months of employment, all team members become eligible for quarterly bonuses, providing additional avenues for financial growth. This robust package is designed to foster a workplace where you can thrive both personally and professionally, underscoring our dedication to your overall well-being and future success.

Anotech, an Alten group company, specializes in engineering consulting for the energy, infrastructure and process industries. Present in 40 countries, we offer reliable and efficient support to our clients in the realization of their large-scale projects, while maintaining compliance with local and international regulations, by presenting them to the highest qualified industry talent. Our goal is to deliver tailor-made engineering services to major industry projects that will shape tomorrow.

Our team is currently looking for a Cost Controller for a critical greenfield construction project. This role is responsible for managing and overseeing cost control processes across a new drug production facility to provide actionable insights to stakeholders and support informed project decision making.

About you:

• Bachelor’s degree in Finance, Accounting, Business Administration, or a related field (Master’s degree or professional certifications such as CPA, CMA, or ACCA are a plus).
• Proven experience in cost control, financial analysis, or project management, with 5-7 years in a leadership role.
• Strong knowledge of cost management principles, budgeting, forecasting, and financial reporting.
• Expertise in financial software (e.g., SAP, Oracle, or similar tools) and advanced proficiency in Microsoft Excel.
• Strong preference for candidates with background in pharma, bio-tech, or nuclear industries
• Exceptional analytical and problem-solving skills, with an ability to interpret complex data and provide actionable insights.
• Strong leadership and team management abilities, with a track record of driving results through collaboration.
• Excellent communication and presentation skills, with the ability to convey financial concepts to non-finance stakeholders.
• Proactive and detail-oriented, with an ability to manage multiple priorities in a fast-paced environment.

About the role:

• Cost Management and oversight, including developing and implementing cost control plans and processes
• Monitor and analyze project budgets, expenditures and forecasts
• Identify cost saving opportunities, risks and variances
• Prepare cost reports based on dashboards, conducting financial analysis insights to leadership and stakeholders
• Work closely with project managers, engineering teams, procurement teams and finance tems to ensure cost control practices

Due to business need, all candidates must be local to the area and have valid US work authorization. Sponsorship will not be offered at this time.

Anotech, an Alten group company, specializes in engineering consulting for the energy, infrastructure and process industries. Present in 40 countries, we offer reliable and efficient support to our clients in the realization of their large-scale projects, while maintaining compliance with local and international regulations, by presenting them to the highest qualified industry talent. Our goal is to deliver tailor-made engineering services to major industry projects that will shape tomorrow.

Our team is currently looking for a Risk Manager for a critical greenfield construction project. This role is responsible for supporting project teams in identifying, assessing and managing risk across the full project lifecycle, ensuring risk management processes, reporting and mitigation strategies are implemented to protect project objectives related to schedule, cost, quality and safety.

About you:

• Proven experience in project risk management within large capital projects, preferably in Pharma, Bio-tech, or Nuclear industries
• Strong knowledge of project controls and project execution processes
• Experience with risk analysis tools such as Acumen, @Risk, Safran or PRA
• Understanding of Monte Carlo analysis and three-point estimation techniques
• Ability to evaluate risk impacts on cost, schedule and project performance
• Ability to facilitate workshops and present complex information clearly to leadership and stakeholder teams

About the role:

• Facilitate identification, assessment, and prioritization of project risks across technical, commercial, operational, and external areas.
• Lead and facilitate risk workshops, reviews, and training sessions with project teams and stakeholders.
• Maintain and update risks within the Risk Management System (e.g., 12C) throughout the project lifecycle.
• Develop and support implementation of risk response and mitigation plans with risk owners.
• Perform quantitative and qualitative risk analysis, including Monte Carlo simulations where applicable.
• Prepare and deliver regular risk reports highlighting key risks, mitigation actions, and residual exposure.
• Support development of project execution plans, risk management plans, and project control documentation.
• Collaborate with project teams to integrate risk mitigation measures into project schedules, cost plans, and delivery strategies.
• Ensure compliance with internal project management frameworks, engineering standards, and regulatory requirements (e.g., GMP).
• Capture and document lessons learned to improve future risk management practices.

Metrology Specialist I

On-site in West Point PA

Summary:

• Manage equipment assets at multiple locations
• Gain a working knowledge of laboratory equipment to facilitate with troubleshooting and/or communicate with the vendor/ service engineer to identify resolutions
• Participate in computer system validation activities associated with new or upgraded equipment or software packages.
• Originate and progress Deviations and Change Control records
• Perform and document investigations and assist in developing and implementing CAPA plans
• Contribute to new SOP drafting, implementation, and revisions.
• Represent the laboratory on all aspects of laboratory equipment during audits.
• Ensure compliance with all regulatory requirements (cGMP), internal policies and procedures.
• Customer focused mindset with the ability to communicate adequately (verbally/writing) to all levels within the organization.
• Willingness and ability to quickly upskill in Merck Facilities/Instrument support programs SAP, ProCal, BAS, LAMP, Electronic Validation, and other document and/or asset repositories
• Initiate, process and track work orders to facilitate timely repairs, modifications and moves of laboratory equipment.

Calibration Focus:

• Prepare, review, and approve archive instrument/equipment documentation such as master equipment lists, user access reviews, Instrument Installation & operational qualification documentation, and calibration documentation.
• Coordinate service activities across a variety of vendors and service engineers while building and maintaining strong working relationships.
• Collaborate with metrology staff across multiple testing labs and sites for process improvement, cross-training and cross-site support.

Support the purchase, installation, and equipment qualification of new laboratory equipment.

*** There will be training opportunities to support Validation*** Validation activities are included below

• Support primarily the qualification/validation of computerized analytical systems as per current guidelines.
• Partner with the business unit in the laboratories, various quality support oversight, IT technical support, and various software and instrument vendors/manufacturers.
• Perform any required change control during the life cycle of a computerized system.
• Decommission systems as required as part of the equipment qualification/validation life cycle.
• Manage the capital purchasing and initial installation of computerized analytical systems prior to validation.
• Participate in various data integrity and lab modernization activities as required.
• Will possess direct experience operating analytical instrumentation within a pharmaceutical or equivalent laboratory (vaccine or large molecule focus).
• Will have the ability to thoroughly review and scrutinize validation requirements through the life cycle of the system.

General Requirements Level 1:

-Bachelor’s degree in biological or chemical science and/or engineering plus

-2-4 years of experience participating in the validation of computerized laboratory systems or instruments (e.g. system Installation and Operational qualification, Performance qualification

-Experience working in a GMP environment and maintaining laboratory equipment.

-Highly organized, strong communication skills.

-Capable of working independently.

-Solutions orientated mindset with the ability to handle multiple high priority tasks at one time.

-Ability to succeed in a dynamic environment; flexibility to respond to changing priorities.

-Awareness to independently prioritize tasks and responsibilities based on actual or perceived level of importance and/or potential impact to the GMP environment.

We are seeking a highly motivated Quality Engineer (QE) to join our Quality team.

This role is responsible for ensuring that supplied materials and components meet internal and external requirements for quality and compliance.

The ideal candidate will have hands-on experience with SAP, a strong understanding of outbound logistics and shelf life labeling, and a working knowledge of aerospace quality clauses and industry standards.

Essential Functions: Lead quality assurance activities from onboarding through lifecycle support.

Perform audits, assessments, and root cause investigations for non-conformances.

Collaborate with suppliers to ensure compliance with customer quality clauses and AS9100/ISO9001 standards.

Review and validate shelf life labels, certifications, and documentation for outbound shipments.

Monitor performance and implement corrective actions using 8D, 5-Whys, or similar tools.

Utilize SAP to manage supplier data, track inspections, and process quality notifications.

Coordinate with purchasing, logistics, and engineering teams to resolve supply chain quality issues.

Qualifications: 3 years of experience in a Supplier Quality, Manufacturing Quality, or related role in the aerospace or defense industry.

Proficiency in SAP for quality and supply chain processes.

Familiarity with outbound logistics, labeling requirements, reviewing CoC's, and shelf life management.

Strong understanding of aerospace quality clauses, contracts, and regulatory requirements (e.g., FAA, EASA, DoD).

Excellent communication, organizational, and problem-solving skills.

ASQ Certified Quality Engineer (CQE) or similar certification is a plus.

In compliance with pay transparency requirements, the salary range for this role is $51,132.00-128,970.00.

This is not a guarantee of compensation or salary, as final offer amount may vary based on factors including but not limited to experience and geographic location.

L3Harris also offers a variety of benefits, including health and disability insurance, 401(k) match, flexible spending accounts, EAP, education assistance, parental leave, paid time off, and company-paid holidays.

The specific programs and options available to an employee may vary depending on date of hire, schedule type, and the applicability of collective bargaining agreements.

L3Harris Technologies is proud to be an Equal Opportunity Employer.

L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination.

All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws.

L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.

Please be aware many of our positions require the ability to obtain a security clearance.

Security clearances may only be granted to U.S.

citizens.

In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.

By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.

L3Harris Technologies is an E-Verify Employer.

Please click here for the E-Verify Poster in English or Spanish .

For information regarding your Right To Work, please click here for English or Spanish .

d24ad0b8-823f-4e68-a892-2986ccdf7392

Who We Are As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future.

We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose.

Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success.

At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact.

By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change.

Join us to lead the clean energy future.

Total Rewards Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally.

We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future.

In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $124,200 to $138,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position Performs advanced regulatory/licensing/technical problem solving and provides analysis/insights in support of department, nuclear plant and fleet regulatory activities.

Responsible for regulatory/technical decisions.

Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations as well as Constellation licensing and regulatory processes.

Primary Duties and Accountabilities Provide in-depth regulatory/technical expertise to develop, manage and implement regulatory analyses, activities and programs.

Provide regulatory/technical expertise and consultation through direct involvement to identify and resolve regulatory issues.

Provide complete task management of regulatory issues.

Perform regulatory and department related tasks as assigned by supervision Accountable for the accuracy, completeness, and timeliness of work ensuring proper licensing basis management and assuring that standard design criteria, practices, procedures, regulations and codes are used in preparation of products.

Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.

Recommend new concepts and techniques to improve performance, simplify operation, reduce costs, reduce regulatory burden, correct regulatory non-compliances, or comply with changes in codes or regulations.

Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.

Minimum Qualifications Bachelor's degree in Engineering or equivalent technical degree Minimum of 6 years of professional experience Effective written and oral communication skills Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties Preferred Qualifications Previous Senior Reactor Operator (SRO) license/certification degree Advanced technical degree or related d24ad0b8-823f-4e68-a892-2986ccdf7392