Engineering Journal Jobs in Niles, IL

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

POSITION PURPOSE

Working within assigned areas, performs on-going Planned Maintenance (PM) and Corrective Maintenance (CM) of diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned  Maintenance (PM) schedules and repairs of assigned clinical equipment. 

Assumes responsibility for Preventive Maintenance (PM) and repair of clinical equipment as assigned by Clinical Engineering (CE) Manager.  Resolves sensitive or complex problems with supervision. 

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair of radiological and general medical equipment.  Makes recommendations regarding imaging test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training sessions on equipment maintenance in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service or coordinates training to radiology clinical/professional staff on proper use and safety of radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I and II as assigned.

Provide on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by the results of customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making.  Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May perform duties as Lead Biomedical Equipment Technician or other duties as assigned or required by the CE Manager.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

One to two years of equivalent experience performing corrective and planned maintenance on diagnostic x-ray, ultrasound and other equipment including but not limited to Mobile, Carms, Radiology Rooms, Dental units, Simulators, Film Processors, laser Camera, CRs, Alternators, 1st Look Nuclear Cameras, etc.  Related experience operating complex testing equipment, including but not limited high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must have a basic understanding of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must have knowledge and understanding of OSHA, NFPA, The Joint Commission, , EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission,  and NFPA standards as well as state and federal regulations.

Working knowledge and ability to use basic hand tools and the test equipment specific to imaging and biomedical modalities.

Ability to analyze and interpret information provided by clinical staff and equipment to determine operational condition, and ability to follow complex written instructions, perform tasks and document actions taken.

Must have basic understanding of personal computer operation,  applications, and  ability to input data using a keyboard.  Network training preferred.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, hospital, and Clinical Engineering.

Strong communication and inter-personal skills are required to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Possess ability to mentally concentrate while being subject to stress, interruptions and frequently changing work priorities.

 Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices. 

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities.

Compensation:

Pay Range: $31.87 - $47.81 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

Working within assigned areas, performs on-going Planned Maintenance (PM)and Corrective Maintenance (CM) of high-level diagnostic and therapeutic imaging equipment used throughout the healthcare facility.  Assists in the planning and installation of diagnostic and therapeutic imaging equipment.

ESSENTIAL FUNCTIONS

Knows, understands, incorporates and demonstrates the mission, vision and core values of Trinity Health and the Ministry Organization in leadership behaviors, practices and decisions.

Meets target objectives and standards for timeliness and quality of Planned Maintenance (PM) schedules and repairs of general and specialized clinical equipment. 

Responsible for maintenance, repair and servicing of specialized equipment in one or more of the following areas:  CT, MRI, PAC’s, nuclear medicine, ultrasound, angiography, and radiation therapy as assigned by Clinical Engineering (CE) Manager.

Orders parts and supplies, within established departmental guidelines, that are required for the emergency service and repair  of all radiological and general medical equipment. Recommend radiology related test equipment and spare equipment parts to the CE Manager.

Responsible for coordinating repairs with vendors and users when needed, this includes follow up paperwork and verification that issues are resolved.

Attends training session on imaging equipment maintenance and technology in order to keep up-to-date on technological and medical equipment advances.  Conducts in-service training sessions to radiology clinical/professional staff on proper use and safety of advanced radiology equipment.  Also, provides assistance and training to Biomedical Equipment Techs I, IIand  Senior Biomed as assigned.

Provides on-call service coverage after normal business hours on a rotating basis, as assigned.

Maintains high level of customer satisfaction as demonstrated by customer satisfaction surveys.

Participates in teamwork by:   Keeping others informed.  Initiating group decision-making. Working to accomplish team objectives and projects.  Seeking feedback about one’s effectiveness as a team member.

Assumes minor extra duties, including work normally assigned to Biomedical Equipment Technicians.

May be assigned duties as Lead Biomedical Equipment Technician or other duties as assigned or required.

Maintains a working knowledge of applicable Federal, State and local laws/regulations; the Trinity Health Integrity and Compliance Program and Code of Conduct; as well as other policies and procedures in order to ensure adherence in a manner that reflects honest, ethical and professional behavior.

MINIMUM QUALIFICATIONS:  

Minimum of Associates of Applied Sciences Degree in related field of medical electronics, electronic technology, imaging service technology or equivalent related military training and experience.  Certified Radiology Equipment Service (CRES) preferred but not required.

Five or more years of equivalent experience performing corrective and planned maintenance on nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment, including but not limited to, R/F, Vascular/Specials, CT SIM, Mammography Units, PACS, Nuclear Cameras, Cath Lab, CT, etc.  Related experience operating complex testing equipment, including but not limited to high Voltage Bleeder or Dynalyzer, Densitometer, Non-Invasive KVp meter, etc.

Must possess specialized training by manufacturer or third party equipment repair in such areas as CT, MRI, nuclear medicine, diagnostic x-ray, therapeutic x-ray, ultrasound, or radiation therapy equipment.

Must possess working knowledge of radiation physics, medical terminology, medical instrumentation, anatomy, physiology, imaging service techniques, 21 CFR (Code of Federal Regulations).

Must possess broad knowledge and understanding of OSHA, NFPA, The Joint Commission, EOC, FDA and other specific regulations and standards pertaining to clinical and radiology equipment service and repair.

Maintain up-to-date understanding of The Joint Commission and NFPA standards as well as state and federal regulations.

Ability to analyze and interpret complex information related to malfunctioning imagining equipment as described by clinical staff, then determines equipment operational condition.  Follow complex written instructions, perform tasks and document actions taken to restore service.

Must be comfortable operating in a collaborative, shared leadership environment.

Must possess a personal presence that is characterized by a sense of honesty, integrity, and caring with  ability to inspire and motivate others to promote the philosophy, mission, vision, goals, and values of Trinity Health, Ministry Organization, and Clinical Engineering .

Strong communication and inter-personal skills are required  to interact positively with all levels of hospital personnel and vendors to achieve positive outcomes, including but not limited to physicists, physicians, administration, etc.

PHYSICAL AND MENTAL REQUIREMENTS AND WORKING CONDITIONS

Must be physically able to balance, bend, climb, crawl, crouch, kneel, reach, sit, squat, stand, twist, and walk.

Ability to mentally concentrate while being subject to interruptions and changing work priorities.

Must be able to work and follow OSHA guidelines while in a hazardous environment(s) such as electrocution potentials, mechanical energies, bloodborne/airborne pathogens, dust and inclement weather, marked changes in temperature and/or humidity, radiation, fumes/vapors, sharp instruments/tools, hazardous liquids, and operating devices

Must be able to hear speech, distinguish sounds, and speak.

Must have near vision, far vision, depth perception, and be able to distinguish colors.

Must have sensory ability to distinguish hot, cold, range of temperature, surfaces, fine motor skills, manual dexterity, and detect/distinguish odors.

Must be able to carry or lift up to 50 pounds routinely (50% of the time) and on occasion (5% of the time) up to 100 pounds.

Must be able to push or pull over 100 pounds frequently (20% of the time).

Maintains safe working environment for self, other associates, patients, visitors, and medical staff in accordance with applicable standards and procedures relevant to  job duties.

Must be able to travel to the various Trinity Health, Ministry Organizations, subsidiaries, and/or training facilities

Compensation:

Pay Range: $47.23-70.84 per hour

Actual compensation will fall within the range but may vary based on factors such as experience, qualifications, education, location, licensure, certification requirements, and comparisons to colleagues in similar roles.

Trinity Health Benefits Summary

Our Commitment

Rooted in our Mission and Core Values, we honor the dignity of every person and recognize the unique perspectives, experiences, and talents each colleague brings. By finding common ground and embracing our differences, we grow stronger together and deliver more compassionate, person-centered care. We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other status protected by federal, state, or local law.

COMPANY OVERVIEW:

Technetics Group Chicago is a leading designer and manufacturer of custom engineered mechanical seals for rotating shafts and precision components for aerospace and specialized industrial applications. #Technetics #Technetics Group

JOB OVERVIEW:

We are seeking a highly motivated and experienced Manufacturing Engineer to join our dynamic team. In this role, you will play a crucial part in optimizing our manufacturing processes, improving efficiency, and ensuring the production of high-quality components This role will involve working closely with cross-functional teams to ensure efficient and cost-effective manufacturing processes for new and existing products.

RESPONSIBILITIES:

• Process Development: Develop, optimize, and standardize processes, tooling/ fixturing, and equipment for new and legacy products, ensuring they meet quality, cost, and delivery requirements. Develops manufacturing procedures, methods, and standards; and monitors their proper execution. Responsible for new product introductions including routed processes, BOM's, In-Process drawings, gaging and including the design/procurement/manufacture of special tooling. Works proactively to prevent problems and prepares for upcoming jobs in advance of their scheduled start dates.
• CNC: Demonstrate a comprehensive understanding of CNC machine operations and the specific applications of various machines to effectively and accurately develop processes.
• Equipment Selection: Select and recommend appropriate machining equipment, tooling, and fixturing to support all departments and processes.
• Fixture Design: Design and implement fixtures and tooling to improve part accuracy, reduce setup times, and enhance overall productivity.
• Process Validation: Conduct process validation and capability studies to verify robustness and reliability. Implement quality control measures to monitor and maintain product quality. Analyze production data to identify and address quality issues. Collaborate with QA team to ensure compliance with customer requirements and industry standards.
• Documentation: Create and maintain detailed process documentation, including work instructions, routings, and quality plans. Develop and maintain standard operating procedures and training guides.
• Continuous Improvement: Identify and implement opportunities for process improvement to enhance efficiency, reduce costs, and improve quality. Take a leadership role in Set-up reduction. Stay up to date with the latest advancements in manufacturing technology and practices.
• Collaboration: Work closely with design engineers, manufacturing engineers, quality engineers, and manufacturing personnel to ensure smooth product launch. Incorporate feedback from prototype and production runs to correct job standards and work instructions.
• Problem Solving: Troubleshoot manufacturing issues and implement corrective actions.
• Other: Perform other related duties as assigned.

BASIC QUALIFICATIONS

• A bachelor's degree in engineering or equivalent job experience is required.
• A minimum of 5 years of direct experience in CNC programming, setup, and operating.
• Understanding of CNC machining.
• Understanding of secondary processes like heat treat, plating, and NDT.
• CAD skills are required– Siemens NX is a plus.
• CAM skills recommended
• ERP – familiarity with an ERP software (M2M preferred)
• Strong GD&T skills are required.
• Understanding of different types of materials for processing.
• Understanding of Root Cause Analysis.
• Microsoft Office skills are required.
• Knowledge of AS9100 standards is a plus.
• Excellent problem-solving skills are required.
• Knowledge of the 8-D problem solving method is a plus.
• Strong interpersonal skills are needed.

SUPERVISORY RESPONSIBILITIES

This position has no direct supervisory responsibilities.

Technetics is a subsidiary of Enpro, a leading industrial technology company focused on critical applications across many end-markets, including semiconductor, industrial process, commercial vehicle, sustainable power generation, aerospace, food and pharma, photonics and life sciences.

At Enpro, we believe that diversity drives innovation and inclusion fosters growth. We are committed to creating a workplace where everyone feels valued and respected. Our employment decisions are based on merit, qualifications, and business needs, without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, age, disability, genetic information, marital status, military service, or any other status protected by applicable law. If you require accommodation due to a disability at any time during the recruitment and/or assessment process, please contact Human Resources, and we will make all reasonable efforts to accommodate your request.

Enpro Inc. is an equal opportunity employer. Legal authorization to work in the United States is required. We will not sponsor employment visas now or in the future for this job.

This position involves access to information that is subject to U.S. export controls. Any job offer made will be contingent upon the applicant’s capacity to serve in compliance with U.S. export controls.

Enpro carefully considers a wide range of compensation factors including the background, education, training, and experience required, as well as geographic considerations such as cost of labor, and applicable local and state laws. These considerations can cause offered compensation to vary. The hiring range for this position is typically $86,000 - $129,000 annually. The actual offer will be based on the individual candidate. Bonus, gainshare, and/or equity may be eligible for this position. Enpro offers a range of benefits including, but not limited to medical, dental, vision, life, 401(k) matching, and other supplemental insurance options.

Position Description:

The Quality Manager will lead and oversee the Quality function at the Morton Grove site, ensuring compliance with GMP regulations, global quality standards, and customer expectations. This role will manage a team of Quality professionals and work closely with cross-functional departments to support the delivery of high-quality clinical and commercial batches.

The ideal candidate brings strong leadership skills, a solid understanding of CDMO business dynamics, and hands-on experience with clinical GMP manufacturing environments.

Role & Responsibilities:

• Lead and manage the Quality Assurance and Quality Control teams at the site, as well as working with Global Regulatory Affairs for RA topics.
• Ensure compliance with GMP regulations, global quality standards, and customer requirements for API manufacturing.
• Oversee batch release activities, including review and approval of clinical and commercial GMP batches.
• Develop, implement, and maintain Quality Systems (deviations, CAPA, change control, investigations, audits, etc.) to ensure a state of continuous compliance and inspection readiness.
• Act as the primary quality contact for clients, regulatory authorities, and internal stakeholders for the site.
• Support regulatory inspections and client audits; ensure timely and effective closure of observations.
• Collaborate closely with Operations, Engineering, Regulatory Affairs, and Project Management to support manufacturing and technology transfer activities.
• Drive continuous improvement initiatives to enhance quality performance and operational efficiency.
• Manage and develop the Quality team through effective leadership, training, and performance management.
• Contribute to the site’s strategic planning as part of the site leadership team.

Experience & Requirements:

• Bachelor’s or master’s degree in chemistry, Pharmacy, Chemical Engineering, or related field.
• Proven experience in a CDMO environment, working with multiple customers and projects.
• Strong experience with clinical GMP batch manufacturing and release.
• Previous experience managing and developing teams.
• In-depth knowledge of ICH guidelines, GMP regulations (e.g., EU GMP, US FDA), and regulatory expectations.
• Excellent communication skills and ability to interact effectively with internal and external stakeholders.
• Strong problem-solving and decision-making skills
• Minimum 5 years of experience in Quality roles within the pharmaceutical or chemical API industry.

• Develop and maintain short- and long-term production schedules aligned with demand forecasts and customer requirements
• Coordinate with manufacturing, procurement, and inventory teams to ensure raw material and packaging availability
• Balance production capacity, labor, and equipment constraints while minimizing downtime and changeovers
• Monitor production performance and adjust schedules in real time to address disruptions or demand changes
• Collaborate with Quality and Food Safety teams to ensure compliance with regulatory and internal standards (FDA, USDA, SQF, HACCP, GMP)
• Maintain accurate production data within ERP/MRP systems
• Analyze KPIs such as schedule adherence, inventory turns, service levels, and waste
• Support continuous improvement initiatives focused on efficiency, cost reduction, and service reliability
• Participate in S&OP and demand planning meetings as needed
  
  

• Bachelor’s degree in Supply Chain, Operations, Industrial Engineering, Business, or a related field
• 2–5+ years of production planning or scheduling experience in a food, beverage, or CPG manufacturing environment
• Strong understanding of manufacturing processes, capacity planning, and inventory management
• Experience working with ERP/MRP systems , Ideally D365
• Working knowledge of food safety and quality standards
• Strong analytical, organizational, and problem-solving skills
• Ability to work cross-functionally in a fast-paced, deadline-driven environment
  
  

LaSalle Network is an Equal Opportunity Employer m/f/d/v.

All assignments are at-will and their duration is subject to change.

The Senior Procurement Analyst will support and execute data-driven sourcing strategies for consumable and expendable (C&E) materials, rotable and repair components for different business groups within the company. This role sits at the intersection of sourcing, analytics, and supply planning leveraging supplier data, forecasting outputs, and inventory planning concepts to inform sourcing decisions.

The ideal candidate has prior hands-on sourcing and contracts experience and is comfortable working with spend management software such as Coupa, SAP Ariba and Zycus, forecasting tools, and BI tools such as Domo, Power BI and Tableau, to support supplier strategy and sourcing decisions in a fast-paced environment.

What you will be responsible for:

• Own direct strategic sourcing for MRO materials and repair services, translating forecast demand and supply plans into multi-year sourcing strategies rather than transactional buying.
• Lead and support RFQs/RFPs, supplier negotiations, and award recommendations, ensuring alignment with cost targets, capacity constraints, quality requirements and contractual terms.
• Evaluate sourcing options using a Total Cost of Ownership (TCO) lens cost, lead time, MOQ, validity to support informed supplier selection decisions.
• Interpret outputs from internal forecasting tools and historical demand data to inform direct sourcing strategies, supplier capacity discussions and volume-based or long-term agreements.
• Demonstrate working knowledge of time-series concepts such as trend, seasonality, variability and forecast error.
• Apply a practical understanding of supply chain planning concepts safety stock, reorder point (ROP), lead time variability, and service levels - to evaluate sourcing options and understand their implications for cost, availability, and supplier strategy.
• Use SQL to extract and analyze spend, demand, pricing, lead time, and supplier performance data from ERP and planning systems.
• Use Python for data analysis, automation, and modeling related to pricing trends, demand variability, and sourcing scenarios.
• Develop and maintain BI dashboards (Power BI, Tableau, or similar) to track KPIs including cost savings, supplier OTD, contract coverage, pricing compliance and contract performance.
• Translate analytical insights into clear, actionable recommendations for sourcing and operations leadership.
• Monitor supplier performance against cost, quality, delivery, turnaround, and capacity commitments.
• Identify risks related to forecast volatility, long lead times, single-source suppliers, and constrained repair capacity.
• Support supplier performance reviews and continuous improvement initiatives.
• Work closely with Maintenance, Planning, Engineering, Quality, and Finance teams to align sourcing with operational and customer requirements.
• Assist with contract reviews, pricing agreements, and service-level terms informed by forecasted volumes.
• Ensure sourcing activities comply with FAA, EASA, AS9110, and internal quality standards.
• Maintain sourcing documentation to support audits and customer requirements.
• Adhere to ethical sourcing and procurement policies.

What you need to be successful in this role:

• Bachelor's degree in supply chain management, Business, Engineering, Data Analytics or related fields.
• 3-5 years of experience in strategic sourcing, procurement or supply chain roles.
• Prior hands-on sourcing experience is required (RFPs, supplier negotiations, supplier selection).
• Working knowledge of forecasting concepts and supply chain planning fundamentals (e.g. safety stock, ROP, EOQ, lead time variability and service levels).
• Experience using spend management software (Coupa, SAP Ariba, Zycus).
• Experience using or supporting demand planning/forecasting and inventory planning tools
• Experience using BI tools (Domo, Power BI, Tableau)
• Strong proficiency in SQL for data extraction and analysis.
• Working proficiency in Python for data analysis and automation.

Preferred:

• Master's degree preferred. Experience in aviation MRO, aerospace aftermarket, or similarly regulated environments.
• Familiarity with MRO ERP and Planning Systems (AMOS, Ramco, Trax, SAP, Oracle).
• Familiarity with FAA, EASA and AS9110 quality requirements.
• Professional certification (CPSM, CSCP, CIPS) a plus.

The rewards of your career at AAR go far beyond just your salary:

• Competitive salary and bonus package
• Comprehensive benefits package including medical, dental, and vision coverage.
• 401(k) retirement plan with company match
• Generous paid time off program
• Professional development and career advancement opportunities

Physical Demands/Work Environment:

The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee may be regularly required to sit, stand, bend, reach and move about the facility. The environmental characteristic for this position is an office setting. Candidates should be able to adapt to a traditional business environment. AAR provides accommodation in accordance with applicable laws through all stages of the hiring process. If you require accommodation for any part of the application and/or hiring process, please advise Human Resources.

Compensation:

The anticipated salary range for this position is $85,000 to $99,000 annually. This range reflects the base salary for candidates who meet the requirements of the role, including experience, education, and location. [In addition to base pay, this role is eligible for a bonus.] AAR offers a competitive benefits package, including medical/dental/vision/life/and AD&D insurance, 401(k) savings plan with employer match, paid time off and holiday pay, as well as opportunities for professional development and growth.

#LI-MA1 #LI-ONSITE