Engineering Journal Jobs in King Washington Remote
300 positions found — Page 2
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.
As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.
You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.
Position Responsibilities Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc.
Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.
Determine and/or develop methods where procedures may not be available.
Devise and make shop aids to facilitate work.
Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
Operate, use and maintain overhead maintenance work platforms Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
Inspect and maintain building runway rails and expansion joints.
Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
Maintain logs, charts, and perform written and verbal tie-in records.
Prepare reports and schedules as required.
Work with and assist employees of other classifications as required.
Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications 2 Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances 2Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.
This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
Able to lift up to 35 pounds.
Preferred Qualifications: Experience inspecting and maintaining building runway rails and expansion joints.
Preference given to those with 2 years overhead crane experience.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: 33.32 – 61.01 Applications for this position will be accepted until May.
29, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Inspector Integral Fuel Cells to join our Quality team in Everett and Renton, Washington.
As an Inspector for Integral Fuel Cells, you will be crucial in maintaining the integrity and safety of our aircraft operations.
This position requires working in confined spaces within the wing fuel cells, where employees must crawl through an opening of 9.5” x 17.7" to access the fuel cell.
Your expertise will be vital in inspecting the cleaning, sealing, and coating processes, as well as conducting thorough leak checks to identify and resolve any issues.
Collaborating closely with Engineering, Quality, and Manufacturing teams, you will implement improvements in build processes and drive initiatives for defect reduction.
Certification for visual acuity and color perception may also be required.
Your ability to use precision measuring instruments and interpret technical documentation will ensure that all components meet stringent specifications, allowing you to make a significant impact on our operations.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Inspect preparatory cleaning, application of sealant, protective coatings, and leak detection coatings of integral fuel cells.
Perform and witness leak checks, determining the source of leaks and evaluating the extent of repairs required.
Inspect final assemblies, subassemblies, and installations of parts and systems for workmanship, fit, alignment, and conformance with applicable drawings and specifications.
Collaborate with Engineering, Quality, and Manufacturing to evaluate and coordinate improvements in build processes and defect reduction initiatives.
Initiate and document any nonconforming materials or assemblies according to specifications and procedures.
Conduct audits and surveillance of manufacturing and quality assurance processes to ensure compliance.
Use precision measuring instruments and shop mathematics to verify that all parts and assemblies meet quality requirements.
Review manufacturing plans and other documentation for completeness and compliance, identifying any discrepancies.
Perform in-process inspections, including checks for torque, sealant applications, and electrical bonding.
Document any discrepancies and report them to the appropriate personnel for resolution.
Verify that parts and assemblies have been properly cleaned and that sealants, primers, and finishes are applied per specifications.
Witness and document functional tests of aircraft components and systems to detect leaks.
Perform shakedown inspections on completed assemblies prior to customer acceptance, documenting any discrepancies.
Maintain personal and tool certifications, ensuring compliance with operational standards.
Assist and train other employees on inspection methods and procedures, providing guidance as needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications: 2 years of experience as a Quality Inspector or in a related inspection role within a similar industry , such as, but not limited to, Aerospace and Manufacturing.
Ability to work in confined spaces (work within or pass through).
Entry diameter 9.5”X17.7”.
Ability to complete Fall Protection Training.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to use a respirator or have been respirator certified.
Proficiency in reading, writing, and speaking English.
Preferred Qualifications: Experience working with precision measuring tools.
Experience sealing Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement: This position is for a variety of shifts.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $27.32 /hour, with potential to earn up to $57.88 /hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Aug.
31, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Employer
City of Kirkland
Salary
$8,599.14 - $10,115.01 Monthly
Location
Kirkland, WA
Job Type
Full-Time
Job Number
202100730
Location
Public Works - Capital Improvement
Opening Date
02/09/2026
FLSA
Non-Exempt
Bargaining Unit
AFSCME
Job Summary
The City of Kirkland's Public Works Department is seeking to hire a Temporary Associate Project Engineer!
Note: This position is classified as temporary and is currently funded through 12/31/2026.
Why Kirkland?
Ranked as one of the most livable cities in America, Kirkland is an attractive and inviting place to live, work, and visit. We have big city vision while maintaining a small-town, community feel. If you are a candidate with the desire to join an organization looking to innovate into the future, the City of Kirkland is the place for you!
If you ask our employees why they love where they work, they will tell you about the great people, work environment, supportive leadership and City Council, and fearless innovation.
We also invest in you!
Competitive Wages: We strive to maintain competitive compensation packages and work to provide wages that meet the knowledge, skills, and abilities of our employees.
Awesome benefits: The City offers benefits that are unmatched by most other employers. Please click on the benefits tab above to view more details.
Childcare Programs: To help address the challenge of reliable childcare, the City of Kirkland has agreements with two local childcare providers that offer discounted rates for our employees at 10 locations within 20 miles of Kirkland. Learn more!
Training and Career Development: The City of Kirkland believes in developing it's employees. You will have access to training opportunities designed for career development and advancement based on your position, skills, and interests.
Job Summary
Entry level engineer/project construction administration providing support to the Capital Improvements Project Team. Assists experienced engineers/coordinators in developing project criteria, studies, plans, specifications, providing calculations, tracking budgets, reviewing construction documentation, and communication related to City Capital Projects.
Principal Accountabilities
Entry level non-supervisory engineer/construction administration. Reports to the Capital Projects Supervisor for coordinated work with experienced engineers and coordinators. Accountable for the follow tasks:
- Assists in various phases of City Capital Improvement Project work including contract administration, project management documentation, public outreach and accounting.
- Supports dissemination of project information to other City Groups and Divisions.
- Aids in the recording of construction records documentation.
Essential Functions
- Supports dissemination of project information by preparation of exhibits.
- Helps gather stakeholder requirements for technical specifications to promote quality assurance.
- Performs field reconnaissance when/as required.
- Assists staff in the review of construction documents including plans, specification and construction management documents through all stages of Public Works projects.
- Works with experienced engineers/coordinators and other staff to coordinate and document field changes.
- Maintains knowledge of current construction codes and changes in industry standards related to construction material and procedure developments.
- Aids in the preparation of project status reports for proper coordination and scheduling of projects.
- Assists with final acceptance report upon project completion.
Peripheral Duties
- Coordinates field activities of City projects with private and public utilities within Kirkland.
- Works with Maintenance and Operations on engineering issues.
- Reviews traffic control plans with the Traffic Engineer.
- Responds to public inquiries or complaints relating to construction activities, standards, administrative procedures, and requested improvements.
- Provides public counter and back-up telephone coverage. Provides information regarding the policy of the City in response to inquiries.
- Assists in maintaining and updating Kirkland Pre-Approved Plans for the Public Works Department.
- Conducts field inspection on an as needed basis to assist inspection staff when workload or absences dictate.
- Maintaining the CIP Group's Lessons Learned file.
- Performs other duties as assigned.
In the event of a civic or civil emergency, position will provide assistance as determined by the City's emergency operations program.
Knowledge, Skills and Abilities
Must possess effective written and oral communication skills, with the ability to work with staff, the public and general contractors in a knowledgeable and professional manner. Must have proficient research and documentation skills.
Qualifications
Minimum Qualifications
- A Bachelor Degree in Engineering, Construction Management or related field; or a combination of education and/or training and/or experience which provides an equivalent background that may be substituted as equivalent.
- Proficient in use of all office equipment including personal computers and related software applications.
- Valid Washington State driver's license.
Other
Working Conditions
Primarily office work, but duties will require some field work both in street rights-of-way and on construction sites under varying weather conditions.
Selection Process
Position requires a resume and cover letter for consideration of application. Please note how you meet minimum qualifications within the cover letter. Applicants who are selected for next steps in the hiring process will be invited by phone or e-mail. Candidates are encouraged to apply at the earliest possible date as screening, interviewing, and hiring decisions will be made through the recruitment period, until such time as the vacancy is filled.
The City of Kirkland is a welcoming community where every person can thrive and grow. We value diversity, inclusion, belonging, and work together to support our community. We do this by solving problems, focusing on the customer, and respecting all people who come into the City whether to visit, live, or work. As an Equal Opportunity Employer, we are committed to creating a workforce that does not discriminate on the basis of race, sex, age, color, sexual orientation, religion, national origin, marital status, genetic information, veteran status, disability, or any other basis prohibited by federal, state or local law. We encourage qualified applicants of all backgrounds and identities to apply to our job postings. Persons with a disability who need reasonable accommodations in the application or testing process, or those needing this announcement in an alternative format, may call or Telecommunications Device for the Deaf 711.
Role Summary
BrickRed Systems is seeking an experienced QA Engineer specializing in testing LLM agents and AI-driven workflows. This role focuses on evaluating agentic behavior, safety, reliability, grounding, automation quality, and deterministic vs. non-deterministic outcomes across advanced AI pipelines. You will collaborate closely with engineering, product, and AI research.
Key Responsibilities
- Design and execute comprehensive test strategies for LLM agents, agentic workflows, multi-step planners, and tool-using AI systems
- Implement Eval-Loops for continuous, automated evaluation of model performance, drift, consistency, and safety
- Build and maintain Golden Datasets to benchmark model accuracy, grounding, and regression behavior
- Use hill‐climbing evaluation techniques to iteratively improve prompts, policies, and model outputs
- Evaluate and test safety shield models (e.g., ShieldGemma) for content filtering, policy enforcement, and guardrail robustness
- Perform adversarial testing against hallucinations, ungrounded responses, safety violations, and reasoning failures
- Develop automation harnesses using Python, REST APIs, LangChain, PromptFlow, and LLM evaluation frameworks
- Assess agent behaviors across variations in prompts, contexts, tools, and reasoning paths
- Analyze responses for factuality, coherence, instruction-following, policy adherence, and chain-of-thought integrity (when applicable)
- Document findings, build structured bug taxonomies, and partner with engineering teams to resolve issues
- Drive improvements in reliability, latency, determinism, and consistent execution of multi-step agent behaviors
Required Technical Skills
- Strong QA experience (manual + automation) with AI/ML, LLMs, or agentic systems
- Hands-on experience with Python, automation frameworks, evaluation scripts, REST/JSON APIs
- Familiarity with LLM platforms (Azure OpenAI, OpenAI, Anthropic, Google Gemini, etc.)
- Experience with evaluation frameworks such as:
- PromptFlow evaluations
- DeepEval / Ragas / Trulens
- LangChain LCEL evaluations
- Custom scoring functions for grounding, correctness, toxicity, etc.
- Experience using or testing safety-shield models (e.g., ShieldGemma or similar)
- Understanding of techniques such as:
- Hill climbing optimization
- Agent loop testing
- Determinism scoring
- Self-reflection / self-correction evaluation
- Guardrail stress testing
- Scenario-based reasoning tests
- Strong analytical and problem‐solving skills for non-deterministic system behavior
- Excellent documentation, communication, and cross-team collaboration skills
About Brickred Systems:
Brickred Systems is a global leader in next-generation technology, consulting, and business process service companies. We enable clients to navigate their digital transformation. Brickred Systems delivers a range of consulting services to our clients across multiple industries around the world. Our practices employ highly skilled and experienced individuals with a client-centric passion for innovation and delivery excellence.
With ISO 27001 and ISO 9001 certification and over a decade of experience in managing the systems and workings of global enterprises, we harness the power of cognitive computing hyper-automation, robotics, cloud, analytics, and emerging technologies to help our clients adapt to the digital world and make them successful. Our always-on learning agenda drives their continuous improvement through building and transferring digital skills, expertise, and ideas from our innovation ecosystem.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Electronic Technician
- Precision Machine Tool Maintenance to join our Equipment Services team in various locations across Washington State.
As an Electronic Technician specializing in Precision Machine Tool Maintenance, your role will involve the installation, maintenance, and troubleshooting of electronic and electrical systems in precision machine tools, where attention to detail and adherence to safety protocols are paramount.
You will be responsible for diagnosing and resolving issues in complex systems, ensuring that all equipment operates efficiently and meets stringent specifications.
Your commitment to quality will be reflected in your ability to collaborate with various teams, maintain accurate records, and comply with all regulatory requirements.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, maintain, troubleshoot, repair, and rework electronic and associated electrical systems of precision machine tools and other manufacturing equipment, ensuring compliance with original equipment manufacturer specifications.
Troubleshoot communication protocols to facilitate the transmission and receipt of information between various machine tool and production systems.
Utilize open computing architecture to diagnose issues in integrated machine tool and production systems, determining appropriate repair actions.
Write and edit programs to support maintenance activities, including alignments and ballbars, using knowledge of high-level programming languages.
Develop test programs and loops to troubleshoot equipment movement for repeatability and accuracy.
Comply with all Federal, State, and Company regulations while performing duties.
Collaborate with other crafts to assist in troubleshooting outside the central control system as needed.
Diagnose malfunctions in systems and components, determining corrective actions to restore optimal operating efficiency.
Communicate relevant information to succeeding shifts using management-approved methods.
Work with lower-classification employees on maintenance, installation, repair, retrofit, modification, calibration, adjustment, and testing of precision machine tools and subsystems.
Maintain equipment records, logs, and updates, preparing reports and schedules as required.
Plan jobs by coordinating equipment, tools, drawings, and procedures to facilitate job completion.
Ensure system configurations comply with FAA and accreditation requirements.
Possess working knowledge of software programming languages (e.g., Boolean, ladder, C, C++) and numbering systems (binary, octal, hexadecimal).
Understand electronic theory, computer and networking architecture, microprocessors, and discrete components.
Use various computing systems and test equipment (e.g., oscilloscopes, meters, laser interferometers, ballbars) to test and adjust electronic components and systems.
Collaborate with Management, Engineering, Equipment Manufacturers, and Vendors to analyze and recommend improvements for facility and equipment design.
Maintain and utilize schematics, blueprints, wiring diagrams, technical documents, and applicable specifications and codes.
Develop and use electronic, electrical, and electromechanical test equipment and measuring devices as required.
Perform tasks associated with other job classifications when necessary to complete assignments.
Obtain and maintain applicable licenses, certificates, and certifications.
Troubleshoot and maintain electronic control devices, spindle systems, sensors, servo systems, PID loops, transducers, feedback technologies, magnetic devices, and electrostatic discharge systems.
Repair digital electronics, serial/parallel bus transmission systems, high-frequency circuitry, analog devices, and printed circuit boards.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.62 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).
Basic Qualifications : 3 years of electronic/electrical experience in any of the following fields: machine tool maintenance, industrial electronic and/or electrical maintenance field, or military electronic/electrical system maintenance.
1 years' experience troubleshooting programmable logic controllers (PLC) OR Functionally Equivalent Control Systems, such as related fields including military, shipboard, aircraft support, weapons systems, or industrial automation platforms.
Ability to work at heights up to 125 feet above ground level and pass Fall Protection Training.
Preferred Qualifications: Experience working in manufacturing or industrial setting maintaining and troubleshooting equipment.
Experience reading and interpreting drawings, specifications, material processes, schematic and diagrams.
Experience working around 3 phase, industrial voltages 480v, 277v, 208v.
Ability to work around electromagnetic fields as a result of various types of production equipment.
Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: This position offers relocation based on candidate eligibility.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts .
Working in other shifts and/or overtime varies based on business needs.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $47.00/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Mar.
30, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title: Senior Engineer, Global Services
- Hybrid Location: Medina, NY Duration: 12 Months Hours: 9 AM
- 5 PM Flexible on availability to be on-site, with someone who can work 1-2 days per week, Open to relocation and considering senior candidates.
must have the ability to travel Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: Applies a solid understanding of engineering and problem-solving theories/practices toward the development of new or enhanced products or processes.
Creates service deliverables and infrastructure required to support initial product launch and lifecycle management.
Capable of designing machine tooling, jigs, fixtures, gauges and equipment used in the servicing process.
Capable of checking designs and drawings against general standards, design requirements, geometric tolerances, drafting practices and the manufacturing process involved.
The work of the individual should be highly creative, of high quality and offer wide latitude for independent judgment and perception with a minimal amount of supervision.
Need not have any tools/ software experience, CAD would be a plus.
Medical background will be a plus any regulatory background will be good.
Someone who was worked with Engineers, multitasking will be a great fit.
Ambiguity, adapt, multi-task and works with lead engineer in projects.
Support the team of Product core and represent service operations and supply chain.
Will be in charge of Service change implementation.
Focuses on design changes, process changes.
Collaborates with Service Process, Engineers, Technicians, impact of changes.
Oversees Document Revision, Handle Change control, mentored and directed by team to tackle multiple product and project Essential Duties and Responsibilities: 1.
Creates new product development and lifecycle management service deliverables throughout the product lifecycle for medical device products involving hardware.
2.
Supports new product platform releases.
Develops and implements service training, test equipment, tools, spare parts, and service manuals / instructions.
3.
Evaluates / makes recommendations on product releases related to design for serviceability.
Creates (or modifies existing) servicing processes and manuals to support repair or refurbishment of fielded product at multiple global sites or in the field.
4.
Works closely with design team to select, develop, and implement technologies across all medical device development programs.
5.
Analyzes key servicing metrics to identify and implement opportunities for improvement in service process quality, cost, or product reliability.
6.
Coordinates information flow between corporate and local/regional teams.
7.
Owns Corrective and Preventive Actions related to the product(s) core team(s) supported, using sound root cause analysis.
8.
May represent Technical Services on new product development and/or lifecycle management core teams.
9.
May independently plan, schedule and lead cross-functional teams in detailed phases of the engineering work in a project.
10.
May approve the work of lower level engineers; may supervise other engineers or technicians Minimum Qualifications: 1.
Must be well versed in core engineering disciplines (e.g.
mechanical, electrical, software, systems engineering).
2.
Highly motivated self-starter who is able to work with minimal supervision.
3.
Must have good interpersonal and oral/written communication skills, good time management, and be capable of analyzing and solving technical problems through innovative thought and application of sound engineering principles and root cause analysis.
4.
Experience with change control methodologies and configuration management principles is a plus.
5.
Experience with test engineering and/or reliability engineering principles is a plus.
6.
Ability to exercise independent judgment and draw conclusions based on available information.
7.
Good understanding of GMP and quality system requirements.
Education and/or Experience: Bachelor's degree in a core engineering discipline (mechanical, electrical, software, systems, or mfg/process engineering) plus 3-5 years of experience.
Medical device experience or other regulated industry experience preferred.
Experience in the use of Lean Six Sigma tools highly desirable.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
GMP, Medical Device, Lean Six Sigma
Remote working/work at home options are available for this role.
*Securian Financial the internal position title is Engineering Sr Analyst or Engineering Consultant. Title and salary will be determined based on applied skills.*
Position Summary:
Join theEnterprise Partner Solutions (EPS)team as aLicensing and Compensation Engineer, where you'll drive innovation in partner experience using cutting-edge SAP technologies. This team envisions a future where every financial producer is empowered from day one through intuitive, reliable, and scalable technology. Our engineering team is committed to transforming the producer experience by delivering back-end systems that simplify onboarding, ensure compliance in licensing, and guarantee timely and accurate compensation. We strive to be the trusted backbone of producer operations, enabling our company to grow with confidence and integrity. If you're passionate about engineering solutions that make a measurable impact, this is your opportunity to shape the future of partner engagement at scale.
Responsibilities include but not limited to:
Support and maintain SAP technologies related to partner compensation and licensing, including APM (ICM), ALM, OK2, and Advanced Workflow.
Perform analysis, design, development, and integration on medium to high level complexity assignments.
Develop and support automation capabilities through webservices and APIs.
Troubleshoot and resolve incidents across the licensing and compensation platform, including integrations with internal and external systems.
Collaborate with product analysts, quality engineers, and business stakeholders to deliver enhancements and ensure platform stability.
Analyze job failures, support tickets, and backlog stories to identify trends and drive continuous improvement.
Participate in Agile ceremonies and contribute to sprint planning, story refinement, and retrospectives.
Document technical processes and contribute to knowledge sharing across the EPS team.
Qualifications:
Bachelor's degree in Computer Science, Information Systems, or related field, or equivalent experience.
3+ years of experience supporting SAP technologies, preferably in compensation or licensing domains.
Familiarity with SAP ICM/APM and ALM modules.
Strong problem-solving skills and ability to manage multiple priorities.
Excellent communication skills and ability to work cross-functionally.
Experience with Agile methodologies and DevOps practices is a plus.
Preferred Qualifications:
SAP Certification in relevant Modules
Development Languages: Java, Groovy, SQL, Git, IntelliJ, webservices
Understanding of compensation payment structures for agents and familiarity with licensing and regulatory compliance frameworks governing producer eligibility to sell products.
Ability to work independently and as part of a collaborative team.
Commitment to continuous learning and process improvement.
#LI-hybrid **This position will be in a hybrid working arrangement.**
Securian Financial believes in hybrid work as an integral part of our culture. Associates get the benefit of working both virtually and in our offices. If you're in a commutable distance (90 minutes) you'll join us 3 days each week in our offices to collaborate and build relationships. Our policy allows flexibility for the reality of business and personal schedules.
The estimated base pay range for this job is:
$72,000.00 - $134,000.00Pay may vary depending on job-related factors and individual experience, skills, knowledge, etc. More information on base pay and incentive pay (if applicable) can be discussed with a member of the Securian Financial Talent Acquisition team.
Be you. With us. At Securian Financial, we understand that attracting top talent means offering more than just a job - it means providing a rewarding and fulfilling career. As a valued member of our high-performing team, we want you to connect with your work, your relationships and your community. Enjoy our comprehensive range of benefits designed to enhance your professional growth, well-being and work-life balance, including the advantages listed here:
Paid time off:
We want you to take time off for what matters most to you. Our PTO program provides flexibility for associates to take meaningful time away from work to relax, recharge and spend time doing what's important to them. And Securian Financial rewards associates for their service by providing additional PTO the longer you stay at Securian.
Leave programs: Securian's flexible leave programs allow time off from work for parental leave, caregiver leave for family members, bereavement and military leave.
Holidays: Securian provides nine company paid holidays.
Company-funded pension plan and a 401(k) retirement plan: Share in the success of our company. Securian's 401(k) company contribution is tied to our performance up to 10 percent of eligible earnings, with a target of 5 percent. The amount is based on company results compared to goals related to earnings, sales and service.
Health insurance: From the first day of employment, associates and their eligible family members - including spouses, domestic partners and children - are eligible for medical, dental and vision coverage.
Volunteer time: We know the importance of community. Through company-sponsored events, volunteer paid time off, a dollar-for-dollar matching gift program and more, we encourage you to support organizations important to you.
Associate Resource Groups: Build connections, be yourself and develop meaningful relationships at work through associate-led ARGs. Dedicated groups focus on a variety of interests and affinities, including:
Mental Wellness and Disability
Pride at Securian Financial
Securian Young Professionals Network
Securian Multicultural Network
Securian Women and Allies Network
Servicemember Associate Resource Group
For more information regarding Securian's benefits, please review our Benefits page.
This information is not intended to explain all the provisions of coverage available under these plans. In all cases, the plan document dictates coverage and provisions.
Securian Financial Group, Inc. does not discriminate based on race, color, religion, national origin, sex, gender, gender identity, sexual orientation, age, marital or familial status, pregnancy, disability, genetic information, political affiliation, veteran status, status in regard to public assistance or any other protected status. If you are a job seeker with a disability and require an accommodation to apply for one of our jobs, please contact us by email at , by telephone (voice), or 711 (Relay/TTY).
To view our privacy statement click here
To view our legal statement click here
Remote working/work at home options are available for this role.
Digital Content Specialist II (Hybrid)
Chicago, IL
The American Medical Association (AMA) is the nation's largest professional Association of physicians and a non-profit organization. We are a unifying voice and powerful ally for America's physicians, the patients they care for, and the promise of a healthier nation. To be part of the AMA is to be part of our Mission to promote the art and science of medicine and the betterment of public health.
At AMA, our mission to improve the health of the nation starts with our people. We foster an inclusive, people-first culture where every employee is empowered to perform at their best. Together, we advance meaningful change in health care and the communities we serve.
We encourage and support professional development for our employees, and we are dedicated to social responsibility. We invite you to learn more about us and we look forward to getting to know you.
We have an opportunity at our corporate offices in Chicago for a Digital Content Specialist II on our Digital Marketing team. This is a hybrid position reporting into our Chicago, IL office, requiring 3 days a week in the office.
As a Digital Content Specialist II, you will support UX copywriting and content
across AMA's digital platforms, with a primary focus on FREIDA, a platform that
helps medical students search for and evaluate residency programs. The role contributes
to the creation of specialty-specific informational content, user-facing copy,
and messaging that helps guide medical students, residents, and physicians
through critical career decisions. Working under established UX and content
standards, this role applies UX writing best practices to improve clarity,
engagement, and usability. The position works closely with product, UX, and
marketing teams to ensure content is consistent, effective, and aligned with
the overall member experience.
RESPONSIBILITIES:
Writing and Content Development
- Write comprehensive Q&A content for individual medical specialties within the FREIDA Specialty Guide
- Develop and maintain informational content across FREIDA resources, including the Residency Guide and student-facing guidance materials
- Develop copy for the Program Director Portal, including guidance, instructions, and resource content
- Create push notifications, alert banners, and promotional messaging to support engagement and highlight key deadlines and seasonal activities
- Collaborate with medical education stakeholders to ensure content accuracy and clinical appropriateness
FREIDA Content
- Create clear, concise, and user-centered copy for FREIDA and AMA digital properties that support the FREIDA experience, including AMAone and related join/renew and sign-in flows
- Write and optimize UX copy for onboarding sequences, navigation, error states, and transactional touchpoints
- Work on landing page and member-facing content that supports usability and conversion goals
- Collaborate with UX designers to integrate copy early in the design process and support effective content-design collaboration
- Conduct content audits and contribute recommendations to improve clarity and usability
User Insight and Industry Awareness
- Develop an understanding of medical student, resident, and physician behaviors to inform content strategy and UX copy decisions
- Apply user insight and evolving UX and healthcare education trends to support product, design, and marketing initiatives
- Refine content based on user feedback, observed behavior, and performance data
May include other responsibilities as assigned
REQUIREMENTS:
- Bachelor's degree in English, Communications, Journalism, Marketing, or a related field required
- Ability to translate complex or regulated information into clear, user-centered language
- Experience collaborating with product, design, and marketing teams through content contributions
- Experience supporting content standards, including voice, tone, and style guidelines
- Comfort presenting recommendations and incorporating stakeholder feedback
- Hands-on experience with enterprise CMS platforms, preferably Drupal, and collaboration tools including JIRA, Confluence, Asana and Figma
- Working knowledge of Google Analytics and Power BI to inform content improvements
The American Medical Association is located at 330 N. Wabash Avenue, Chicago, IL 60611 and is convenient to all public transportation in Chicago.
This role is an exempt position, and the salary range for this position is $74,160-$98,318. This is the lowest to highest salary we believe we would pay for this role at the time of this posting. An employee's pay within the salary range will be determined by a variety of factors including but not limited to business consideration and geographical location, as well as candidate qualifications, such as skills, education, and experience. Employees are also eligible to participate in an incentive plan. To learn more about the American Medical Association's benefits offerings, please click here.
We are an equal opportunity employer, committed to diversity in our workforce. All qualified applicants will receive consideration for employment. As an EOE/AA employer, the American Medical Association will not discriminate in its employment practices due to an applicant's race, color, religion, sex, age, national origin, sexual orientation, gender identity and veteran or disability status.
THE AMA IS COMMITTED TO IMPROVING THE HEALTH OF THE NATION
Apply NowShare Save JobRemote working/work at home options are available for this role.
Driven by a unique Purpose, Culture, and Value Delivery Model, we enable meaningful connections between talented professionals and forward-thinking organizations.
Since our formation in 2002, organizations across commercial and public sectors have been trusting us to help build their teams with exceptional temporary and permanent talent.
Visit us at to learn more and view our open positions.
Please apply or call one of us to learn more For further inquiries about this opportunity, please contact one of our Talent Specialists, Hema, at (63 or Sri Balan at (63 Title
- Quality Engineer 2
- Remote Duration: 12 Months Location: Remote Only W2 candidates are eligible for this position.
Third-party or C2C candidates will not be considered.
Description: Summary: The main function of a quality engineer is to research and test the design, functionality, and maintenance of products, equipment, systems, and processes, and develop quality standards.
A typical quality engineer can read and interpret blueprints and evaluate product integrity and standards.
Job Responsibilities: Devises sampling procedures and designs and develops forms and instructions for recording, evaluating, and reporting quality and reliability data.
Establishes a program to evaluate the precision and accuracy of production equipment and testing, measurement, and analytical equipment and facilities.
May write training material and conduct training sessions on quality control activities.
May specialize in areas of quality control engineering, such as design, incoming material, process control, product evaluation, product reliability, inventory control, metrology, automated testing, software, research and development, and administrative applications.
Skills: Creativity, verbal and written communication skills, analytical and problem-solving ability.
Team player and detail-oriented.
Basic ability to read and interpret blueprints, technical drawings, schematics, and computer-generated reports.
Basic experience with computer applications and software related to the engineering field, such as Computer-Aided Design (CAD).
Education/Experience: Bachelor's degree in engineering required.
2-4 years of experience required.
About us: DivIHN, the 'IT Asset Performance Services' organization, provides Professional Consulting, Custom Projects, and Professional Resource Augmentation services to clients in the Mid-West and beyond.
The strategic characteristics of the organization are Standardization, Specialization, and Collaboration.
DivIHN is an equal opportunity employer.
DivIHN does not and shall not discriminate against any employee or qualified applicant on the basis of race, color, religion (creed), gender, gender expression, age, national origin (ancestry), disability, marital status, sexual orientation, or military status.
schematics, Computer Aided Design (CAD)
Remote working/work at home options are available for this role.
LHH is seeking a Senior Databricks AI/ML Engineer to join our client's team in a fully remote role based in Seattle, WA. Candidates must live in one of the following states, and be prepared to pass a background check/identity verification process: WA, OR, ID, OH, SC, NC, TX, or FL
LHH has a dynamic and challenging opportunity for a Senior Databricks AI/ML Engineer to join our client's engineering team. This role focuses on building and deploying scalable AI/ML solutions across key areas of the insurance functions, including underwriting, claims, pricing, customer engagement, and fraud detection, with a strong emphasis on Databricks architecture and ecosystem integration. The engineer will collaborate closely with data scientists, actuaries, product owners, and engineers to operationalize models, transforming them into robust, production-grade systems seamlessly integrated into business workflows and enterprise platforms.
Salary & Benefits:
- $150k to $185k annually (depending on location & experience)
- Medical, dental, and vision insurance
- 401(k) plan with employer match
- Vacation time accrues at a rate of 10 days annually, with increases based on a tenure schedule, up to a maximum of 25 days per year.
- PTO included Four (4) personal days are granted immediately upon hire.
- Paid holidays are provided for the eight (8) holidays observed in this role throughout the calendar year.
- Up to ten (10) days of sick leave are granted immediately upon hire (pro-rated based on hire date and full-time/part-time status).
- Additional paid time off is available for bereavement, jury duty, and employee volunteer activities in the community.
- Life and disability insurance
Minimum Qualifications:
- Bachelor's degree in Computer Science, AI/ML, Data Science/Engineering, or related field (or equivalent experience).
- 6+ years experience in ETL pipelines, SQL Server, and production data workflows.
- 3+ years enterprise experience with Azure & Databricks AI/ML, including data analysis and visual analytics.
- 3+ years applying ML algorithms and transforming data science prototypes into production.
- 5+ years experience with CI/CD workflows for ML models and related code.
- Strong SQL, real-time and batch data pipeline development, and unsupervised learning techniques.
- Familiarity with agile methodologies (e.g., Scrum).
Responsibilities:
- Conduct customer workshops to gather requirements and design analytics architectures using Azure and Databricks AI/ML.
- Serve as Databricks Architect, managing workspace design, deployment, and governance across environments.
- Define and implement Databricks Lakehouse architecture and governance best practices.
- Integrate Databricks with Azure services and lead implementation of Databricks SQL, Delta Live Tables, and MLflow.
- Develop and maintain automated MLOps workflows for model deployment, monitoring, and lifecycle management.
- Set up and configure Azure and Databricks infrastructure for AI/ML workloads.
- Review ML model code and analytics scripts for quality and performance.
- Design and build data pipelines and cloud services for monitoring, analysis, and reporting.
- Develop robust ETL workflows using Databricks, Spark, and SQL Server for structured and unstructured data.
- Provide production support and performance tuning for data engineering workflows.
- Optimize complex SQL queries and stored procedures for data processing and business logic.
- Collaborate with cross-functional teams to ensure data quality and support business decision-making.
- Scale and deploy machine learning models to handle large-scale data.
- Feed raw data into models and build deployment pipelines for new models.
- Implement logging, observability, and performance monitoring for AI/ML systems.
- Conduct architecture reviews and performance testing.
- Perform other duties as assigned.
Preferred Qualifications:
- Master's degree in a related field.
- Experience in the insurance industry (Auto, Home, Umbrella) and related AI/ML applications.
- Proficiency with tools/platforms: Azure ML, Databricks, Microsoft Fabric, Synapse, Power BI, Snowflake, and APIs like Azure OpenAI and Cognitive Services.
- Knowledge of streaming frameworks: Apache Kafka, Azure Event Hubs, Delta Live Tables.
- Strong math, problem-solving, and rapid learning skills.
- Excellent communication, organization, and independent work capabilities.
- Service-oriented mindset with ability to handle ambiguity and build strong relationships.
Equal Opportunity Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
Remote working/work at home options are available for this role.
