Engineering Jobs Full Time Jobs in Mcclellan Park, CA

Herrig, Vogt & Hensley, LLP, is a well-respected mid-size practice known for its expertise in several distinct areas of law, including Family Law. The firm is seeking a dedicated, empathetic and detail-oriented Family Law Associate Attorney to join its Granite Bay team. Experience in Family Law areas, including but not limited to divorce, child custody, support, and asset division is preferred but not mandatory.

Responsibilities will include:

• Manage a full and active caseload of family law matters, including divorce, child custody, child support, spousal support, and domestic violence.
• Provide legal counsel to clients and advocate for their best interests in negotiations, mediations, hearings, and trials.
• Draft, review, and file legal documents, including pleadings, motions, and settlement agreements.
• Maintain consistent and clear communication with clients and opposing counsel.
• Collaborate with paralegals and other associates to ensure quality service and client satisfaction.

Qualifications Required:

• Juris Doctor (JD) degree from an accredited law school.
• Active license to practice law in the State of California
• Good Standing with the California State Bar Association.
• Excellent legal research and writing abilities.
• Ability to manage a caseload independently and thrive in a fast-paced environment.

Job Type: Full-Time

Salary Range: Base salary for qualified candidates will be set to $100,000. This amount may increase based on years of experience demonstrated.

We offer:

• Competitive benefits package
• Friendly workplace environment with an emphasis on a positive work-life balance.

To Apply:

Email the following to Cara Feld at :

• Resume
• List of professional references
• Writing Sample

Want to make extra money on YOUR schedule? Join our exclusive list of research study participants and start earning extra income today!

Perfect for anyone seeking remote, part-time, or temporary work, these opportunities require no previous experience and offer unmatched flexibility. Choose the studies that suit you best—whether online, in-person, or over the phone—and get paid for sharing your opinions.

Don't miss out on this chance to turn your free time into valuable earnings!

Participants are needed on a wide range of topics such as:

• Health Issues (Research for cures and new medications to treat ailments)
• Consumer Products (Your experience with consumer products)
• Shopping (Shopping experiences)
• Internet Usage (How you use the internet)
• Vehicles (recreational vehicles and automobiles)
• Employment (Various types of jobs or career fields)
• Food & Beverages (the consumption of various foods and beverages)
• Entertainment (About TV, movies or video games)
• Social Media (the use of different social media platforms)
• Financial (Banking and investing)
• Retirement (Planning what, when and how)
• Gender (studies based on your gender)
• Housing (Renters or Homeowners)

Compensation:

• Earn up to $250+ in Just ONE Hour! (Focus Group Session)
• Earn up to $3,000+ (Multi-Session Studies)

Benefits:

• Flexibility to take part in discussions online or in-person.
• No commute needed if you choose to work from home.
• No minimum hours. You can do this part-time or full-time
• Enjoy free samples from our sponsors and partners in exchange for your honest feedback of their products.
• You get to review and use new products or services before they are launched to the public.

Qualifications:

• Speak and/or read English
• Must be 18yrs old or older
• Must have either a phone, computer or tablet with internet connection

Experience:

• Start Immediately - No Experience Needed! Anyone Can Participate!

Education:

• Open to all education levels - Your opinion matters!

Harris & Bruno International (H&B), a printing equipment and spare parts manufacturer, is seeking full-time CNC Machinist III ($30-$35 p/h) & CNC IV/Programmers ($36-$45 p/h). See below for both job descriptions.

CNC Machinist III ($30-$35 P/h)

This is a highly skilled, senior-level machinist responsible for setting up and operating CNC equipment to manufacture precision components. This role serves as a technical expert on the shop floor, leading complex machining projects, troubleshooting issues, and mentoring junior machinists to ensure quality, efficiency, and continuous improvement.

Expectations

• Set up and operate CNC mills for complex, tight-tolerance parts
• Edit and optimize CNC programs (G-code or CAM-generated)
• Interpret advanced engineering drawings, GD&T, and specifications
• Select appropriate tooling, fixtures, and machining strategies
• Perform first article inspections and in-process quality checks using precision measuring tools
• Troubleshoot machining issues, including tooling, programming, and material challenges
• Optimize cycle times and improve manufacturing processes
• Lead or support continuous improvement initiatives (lean, 5S, etc.)
• Train, mentor, and provide guidance to CNC Machinist I & II team members
• Collaborate with engineering and quality teams to resolve design or production issues
• Maintain equipment and ensure proper machine upkeep
• Follow all safety and quality procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training or apprenticeship preferred)
• 5–10+ years of CNC machining experience in a manufacturing environment
• Advanced experience with CNC mills (multi-axis preferred)
• Basic programming skills (G-code and/or CAM)
• Deep understanding of GD&T and blueprint reading
• Proficiency with precision measurement tools (micrometers, calipers, height gauges, CMM exposure a plus)
• Experience machining a variety of materials (aluminum, steel, stainless, etc.)
• Strong troubleshooting and problem-solving skills
• Ability to work independently with minimal supervision

Preferred Qualifications:

• Experience with 4-axis and 5-axis machining
• Lean manufacturing or continuous improvement experience
• Leadership or team lead experience
• Familiarity with ERP/MRP systems

CNC lV/Programmer ($36-$45 p/h)

This is a senior-level technical expert responsible for full-cycle CNC programming, setup, and operation of complex precision components. This role leads advanced machining strategies, develops efficient programs using CAM software, and drives continuous improvement across machining processes. This position supports engineering and manufacturing by assisting with troubleshooting, process development, and manufacturability improvements, while mentoring machinists and supporting production excellence.

Expectations

• Develop, write, and optimize CNC programs using CAM software (e.g., Mastercam, Fusion 360)
• Set up and operate CNC mills and/or lathes for highly complex, tight-tolerance parts
• Interpret advanced engineering drawings, CAD models, and GD&T requirements
• Design and recommend tooling, fixtures, and workholding solutions
• Lead new part introduction (NPI) from print to production
• Perform program prove-outs, first article runs, and process validation
• Troubleshoot and resolve complex machining, tooling, and programming issues
• Optimize cycle times, tool life, and overall machining efficiency
• Collaborate closely with engineering to improve part manufacturability (DFM feedback)
• Mentor and train CNC Machinist I–III team members
• Establish and document standardized work instructions and setup sheets
• Support continuous improvement initiatives (Lean, 5S, Kaizen)
• Ensure compliance with quality standards and safety procedures

Education and/or Experience:

• High school diploma or equivalent required (technical training strongly preferred)
• 8–12+ years of CNC machining experience, including advanced programming
• Expert-level proficiency with CNC mills (multi-axis required)
• Advanced CAM programming experience (Mastercam, Fusion 360, or similar)
• Strong G-code knowledge and ability to edit programs at the machine
• Deep understanding of GD&T and blueprint interpretation
• Experience with complex materials (stainless steel, tool steels, aluminum, etc.)
• Proficiency with precision inspection tools; CMM experience preferred
• Proven ability to troubleshoot and optimize machining processes
• Ability to work independently and lead technical projects

Preferred Qualifications:

• 4-axis and 5-axis machining expertise
• Fixture design experience
• Lean manufacturing or Six Sigma exposure
• Experience with ERP/MRP systems

Both Positions:

Physical Requirements:

• Standing/Walking: Must be able to stand and walk for extended periods.
• Lifting/Carrying: Must be able to lift, carry, push, or pull materials and equipment weighing up to 50 pounds.
• Manual Dexterity: Requires the use of hands and fingers to handle, feel, reach, and operate tools, measuring instruments, and computer controls.
• Vision Requirements: Must have close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus to inspect parts and read precision measuring instruments.
• Hearing and Communication: Must be able to hear machine sounds, alarms, and verbal instructions in a noisy environment.
• Postural Requirements: Must be able to bend, stoop, kneel, crouch, and occasionally climb or balance while loading materials or accessing machinery.
• Work Environment: Exposure to moving mechanical parts, metal shavings, noise, coolant, and shop odors. Personal protective equipment (PPE) such as safety glasses, hearing protection, and safety shoes are required.

Benefits Package Includes:

• Medical.
• Dental.
• Voluntary Vision.
• Company provided life insurance with the option of additional voluntary life insurance.
• 401k with employer match.
• Robust PTO policy beginning with 3 weeks earned the first year.
• Paid holidays.

About Harris & Bruno International:

H&B is a state-of-the-art manufacturing company headquartered in Roseville, CA with an established location in Germany and new location in Post Falls, Idaho with a brand-new facility. Since 1948 we have been building equipment for some of the largest names in printing, such as HP, Shutterfly, and Vistaprint. Although we are a small company, the equipment and machines we build go to every corner of the world. From the designing and engineering, fabrication, mechanical and electrical assembly, and final installation at the customers facility, we do it all.

Pilot—CBP Air Interdiction Agent

NEW RECRUITMENT AND RETENTION INCENTIVES!

Air and Marine Operations (AMO), a component of U.S. Customs and Border Protection (CBP), offers skilled Pilots interested in law enforcement an opportunity to work with an elite team of highly trained professionals whose camaraderie, pride, and purpose are hallmarks of their daily mission to protect America.

If you are looking for an exciting and rewarding career with excellent pay, exceptional federal benefits and job stability, now is the time to make your move: become an Air Interdiction Agent. AMO is actively recruiting for these full-time security-based opportunities with a streamlined application process. Notably, seasoned pilots and those with military training are in demand–APPLY TODAY!

DON'T FORGET TO CHECK OUT THE INCENTIVES – SEE SALARY SECTION BELOW!

Duty Locations

Locations are offered based on operational requirements, mission requirements, and critical agency hiring needs as determined by AMO. You must be willing to work at any duty location within the region you select to include but not limited to the following:

Southeast Region: Homestead, FL and CAMB: Aguadilla, PR

Southwest Region: Tucson and Yuma, AZ; San Diego, CA; El Paso, Laredo, and McAllen, TX

NASOC UAS locations: Sierra Vista, AZ; San Angelo, TX

Duties and Responsibilities

As an Air Interdiction Agent (AIA) you will perform aviation-based law enforcement operations for the detection, prevention, interdiction, and apprehension of terrorists, terrorist weapons, and other contraband and persons from illegally entering or attacking the United States. Typical duties include:

• Conducting air patrol, surveillance, and pursuit activities related to the interdiction of smuggled contraband via land vehicles, aircraft, or vessels.
• Monitoring behavior patterns and activities of suspect persons, vehicles, or vessels believed to be engaged in illegal activities.
• Collecting, refining, and analyzing strategic and tactical intelligence.
• Supporting search and rescue and humanitarian efforts.

Salary and Benefits

Begin your career as an Air Interdiction Agent (AIA) and make up to $85,270 to - $110,846 per year based on your qualifications for the GS-11 grade level and possible extra compensation based on your duty location (see below).

Recruitment Incentive: New hires may be eligible to receive a one-time Recruitment Incentive payout of $10,000 after completing Federal Law Enforcement Training Academy (FLETC) (1 year service agreement will need to be completed) (Recruitment Incentive is only available to new Federal employees as described in 5 CFR 575.102. Eligibility will be determined by Human Resources.)

Your starting salary will include Special Salary Rate (SSR); Law Enforcement Availability Pay (LEAP); Recruitment Incentive; and Retention Incentive.

This career ladder position has a grade level progression of GS-11, GS-12, and GS-13. You may be eligible for a promotion to the next higher grade level automatically (without re-applying) once you complete 52 weeks at each grade level (with supervisor approval).

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive LEAP (amounts below include the SSR + LEAP).

• GS-11, 1st year annual pay - $106,588
• GS-12, 2nd year annual pay - $127,754
• GS-13, 3rd year annual pay - $151,918

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 10% Retention Incentive (amounts below include the SSR + LEAP + 10% Retention Incentive UAS Sites: Sierra Vista, AZ; Grand Forks, ND; San Angelo, TX).

• GS-11, 1st year annual pay - $115,115
• GS-12, 2nd year annual pay - $137,974
• GS-13, 3rd year annual pay - $164,071

Example of annual compensation for the first three years at our new-hire locations which are currently authorized to receive a 25% Recruitment Incentive (amounts below include the SSR + LEAP + 25% Recruitment Incentive CAMB location only; Aguadilla, PR).

• GS-11, 1st year annual pay - $127,906
• GS-12, 2nd year annual pay - $153,305
• GS-13, 3rd year annual pay - $182,302

Retention Incentive: Retention Incentive is contingent on eligibility. Eligibility will be determined by Human Resources.

• RI: Retention Incentive (25% for UAS Sites, Sierra Vista, AZ, Grand Forks, ND, San Angelo, TX)

• RI: Retention Incentive (25% for Key West, FL)

RI: Retention Incentive (25% for Caribbean Air and Marine Branch (CAMB) and subordinate locations)

Air Interdiction Agents are eligible to select from an array of federal employment benefits that include health, dental and other insurance plans, a generous annual and sick leave program, and participation in the Thrift Savings Plan, a retirement plan akin to a traditional and ROTH 401(k) offering.

Qualifications

Experience: You qualify for the GS-11 grade level if you possess one (1) year of specialized professional aviation experience performing duties such as:

• Flying as a Pilot-in-Command or sole manipulator in an airplane and helicopter in all environments of flight, including night, poor weather, unfavorable terrain, low altitudes, or speed.
• Evaluating information rapidly and making judicious decisions promptly during in-flight operations.
• Developing strategies and coordinating aircraft and ground assets.
• Using information systems and databases to conduct information surveys, queries, update files and disseminate information.
• Experience may include Operation of an aircraft as Captain, Pilot in Command, Aircraft Commander, First Officer, Certified Flight Instructor, Second in Command, or Co-pilot.

Hiring Minimums:

Certification & Ratings: A current FAA Commercial or ATP Pilot Certification with one of the following ratings:

• Dual Rated: Airplane (Single-engine land or multi-engine land) with instrument rating AND Rotorcraft Helicopter with instrument rating.
• Airplane Rated: Airplane (Single-engine land or multi-engine land) with instrument.
• Helicopter Rated: Rotorcraft Helicopter with instrument rating.
• Equivalent military rating of the above at the time of application (eligibility based on military flight experience must provide official orders, forms or logbooks showing their status as a rated military pilot).

Flight Hours: Pilot Enter on Duty minimums are 1500 flight hours; (up to 500 hours can be waived, reducing the pilot enter on duty minimums to 1000 hours.

250 Pilot-in-Command hours; 75 Instrument hours; 75 Night hours (Flight Hour Waiver available, see Required Documents); and 100 Flight hours in the last 12 months This qualification requirement is currently being waived by OPM through August 5, 2025.

FAA Class 2 medical required for assessment dated within the last 12 calendar months; FAA Class 1, FAA Class 2 or Military medical flight clearance dated within the last 12 months qualifies to start the pre-employment process for the AIA position.

Apply at 750 hours total time: Applicants applying at 750 flight hours are required to obtain at least 1,000 flight hours (depending on the number of hours approved for a waiver) at their own expense before being able to attend the 3-part flight assessment. Applicants must still meet 250 Pilot-in-Command, 75 instrument, and 75-night hours (100 flight hours in the last 12 months. This qualification requirement is currently being waived by OPM through August 4, 2026)

UAS Flight Hours: Applicants may include UAS Predator A (MQ-1), Predator B (MQ-9) flight hours and Predator A (MQ-1), Predator B (MQ-9) or predator-based flight hours. These hours may be credited towards satisfying the "Total flight time" 1,500 flight hour requirement only. UAS hours do not count towards the 250 flight hours as a Pilot in Command, 75 flight hours Instrument, and 75 flight hours Night. Flight hour logbooks will be required at the time of your Flight Assessment for verification.

Other Requirements

Citizenship: You must be a U.S. Citizen to apply for this position.

Residency: You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three of the last five years.

Age Requirement: Provisions of Public Laws 93-350 and 100-238 allow the imposition of a maximum age for initial appointment to a primary Law Enforcement Officer position within the Department of Homeland Security (DHS). In accordance with DHS Management Directive 251-03, the "day before an individual's 37th birthday" is the maximum age for original appointment to a position as a primary law enforcement officer within DHS. The age requirement is also necessary to ensure that you are able to complete the 20 years of applicable service for retirement.

NOTE: The Commissioner of CBP has approved a temporary increase in the maximum allowable age to 40 for original placement into an Air Interdiction Agent position.

Age Waiver: Creditable law enforcement officer service - Covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d), or creditable service covered by Title 5 U.S.C. 8401(36) (as a Customs and Border Protection Officer) on or after July 6, 2008, may be applied toward the maximum age requirement. This age restriction may not apply if you are currently serving in a federal civilian (not military) law enforcement position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).

Veterans' Preference Eligibility: To ensure compliance with statutes pertaining to the appointment of preference eligible veterans as determined by the Merit Systems Protection Board in its decision Isabella v. Dept of State, the maximum age for original appointment articulated above shall not apply to the hiring of individuals entitled to veterans' preference eligibility under 5 U.S.C. 3312. You must submit proof of Veteran's Preference (DD-214 Member 4 Copy) at the time of application.

Training: This position has a training requirement. You may be required to successfully complete the training requirement as a condition of employment. Failure to successfully complete the required course(s) of training in accordance with CBP standards and policies will result in placement into either a former or different position, demotion, or separation as determined by management and appropriate procedures.

Travel Required: You may be expected to travel for this position based on operational needs.

How to Apply

There Are Three Ways to Apply to Become an Air Interdiction Agent:

• Fill out the Air Interdiction Agent applicant checklist and email it to a recruiter at along with a copy of your resume; OR

• Apply on USAJOBS ; OR

• Apply on Airline Apps.

Stay Updated – Opt into CBP's talent repository (highly recommended) by selecting the Contact a Recruiter button. For Position of Interest select Air and Marine Operations, Air Interdiction Agent, then complete the pre-screening questions. You'll receive monthly emails with information about webinars, career expos, and future opportunities with AMO and CBP.

Join Our Dynamic Team as a Workers’ Compensation Claims Administrator!

Position: Workers’ Compensation Claims Administrator

Location: In-Office, Rancho Cordova, CA 95670

Job Type: Full-time Hourly

Salary: $25 to $34/hr.

Who We Are:

EmployInsure LLC delivers Engineered Employment Products designed to eliminate gaps from antiquated practices and enable Frictionless Employment for customers across the employment value chain. Our Mission is to inspire and redefine the relationship between industry and individual by transparently connecting all buyers and sellers of talent to create maximum value.

Our diverse team is powered by forward-thinkers, innovators, and rapid problem-solvers. We are committed to making a significant impact to scale the company. We believe in fostering a collaborative and inclusive work environment where every voice is heard and valued.

EmployInsure is the parent company of its brands, Samuel Hale and Evoove, in exclusive partnership with the PACT. To learn more about our family of companies, check out our websites!

Home - Samuel Hale - California Workers' Comp Fraud Savings

Evoove | Centralized Staffing Solutions

The PACT Life – Welcome to The PACT

Our Core Values:

• Entrepreneurial Spirit: A mindset that involves seeking out change, taking risks, and pursuing new opportunities.
• Quest for a Deeper Understanding: A true professional never stops getting better at their craft. They practice and measure and debate over their understanding of the truth, embodying a growth mindset.
• The Stockdale Paradox: We confront the brutal honesty of our current reality while always maintaining an unwavering faith in our ability to overcome all challenges that get in our way. We have toughness, determination, and passionate belief!

Key Responsibilities:

The Workers’ Compensation Claims Administrator manages the end-to-end claims intake process for work-related injuries across our multi-state employer of record and PEO client portfolio. This role is a critical risk management function that protects EmployInsure’s financial exposure while supporting injured workers through efficient, compliant claims handling.

Claims Intake & Management: Receive, process, and document new workers’ compensation claims; gather required documentation; establish claim files per applicable state jurisdiction requirements.

Multi-State Compliance: Ensure all claims handling adheres to applicable statutes and regulations across operating jurisdictions; stay current on state-specific regulatory changes.

Carrier & TPA Coordination: Interface with third-party administrators and medical providers; escalate complex and catastrophic claims appropriately.

Return-to-Work: Partner with client managers to coordinate modified duty and return-to-work programs; work to reduce lost-time claim frequency and duration.

Litigation Support: Prepare claim documentation and file summaries as requested.

Fraud Detection: Identify and escalate suspected fraudulent claims; document red flags per company protocol and carrier guidelines.

Reporting & Metrics: Produce regular claims metrics and loss reports for internal leadership; support loss control reporting and client-facing summaries.

Employer & Client Communication: Serve as the primary WC contact for internal managers and PEO/EOR clients; educate on claims reporting obligations, timelines, and prevention best practices.

Basic Qualifications:

Bachelor’s degree in Risk Management, Business, or related field preferred; equivalent experience considered.

• 1+ years of workers’ compensation claims administration or adjusting experience required; multi-state experience required.
• California workers’ compensation knowledge required; experience in additional jurisdictions strongly preferred.
• Familiarity with PEO, EOR, or staffing environments is highly preferred.
• Working knowledge of OSHA recordkeeping requirements and return-to-work program best practices.
• Proficiency with claims management systems and Microsoft Office Suite.
• Strong communication and organizational skills; ability to manage a high-volume, multi-jurisdiction claims caseload.

We Offer a Best-in-Class Professional Benefits Package to Support our Employees:

• Comprehensive premium healthcare coverage: Medical, dental, and vision plans. Employees are 100% covered by the company. Low deductibles for spouse/partner and dependents
• Generous Paid Time Off: Unlimited paid time off policy and paid holidays
• Profit Sharing Plan: Share in the success of the company
• Retirement Savings Plans: 401(k) with a 5% company match to help you secure your financial future
• Paid Parental Leave: Paid leave for birthing and non-birthing parents
• Lifetime pension plan: Vest into our pension plan for a lifetime income
• Wellness Support: Access to wellness programs, mental health resources, financial counseling, legal support, and employee assistance programs.
• Professional Growth Opportunities: Learning resources to help you thrive.
• Death Benefits: Company-paid to protect you and your loved ones.
• Exclusive Perks: Employee discounts, Babble Language Learning, and more.

Join us and experience a benefits package designed to empower your well-being, career growth, and personal goals!

Samuel Hale is an Equal Opportunity Employer and considers applicants for all positions without regard to race, color, creed, religion, ancestry, national origin, age, gender identity, gender expression, sex/gender, marital status, sexual orientation, physical or mental disability, medical condition, use of a guide dog or service animal, military/veteran status, citizenship status, basis of genetic information, or any other group protected by law.

Samuel Hale is an E-Verify company. For more information, please review our Participation and Your Right to Work.

California Privacy Notice for Job Applicants If you are a California resident, we collect and use the personal information you provide in your application for recruiting, hiring, and compliance purposes in accordance with the CCPA/CPRA. We do not sell or share applicant personal information as those terms are defined by law. For details about what we collect, how we use it, and your privacy rights, please review our California Applicant & Employee Privacy Notice at or contact us at

Rite-HiteService Technicianswill install, maintain, and repair loading dock equipment and industrial doors at customer facilities. In addition, Service Technicians act as a technical resource for our customers and our sales force. This position works independently or in small teams in a field service environment, and is a primary customer contact.

Rite-Hitesells the best and we hire the best. This position requires experience welding and working with mechanical, hydraulic, and electrical systems. Prior experience in the repair or installation of industrial equipment is preferred. Selected candidate must be able to work independently in a field environment. Good customer service skills are required. This position requires the ability to work outdoors, at heights, and lift up to 100 pounds. As this position requires driving a company vehicle, a pre-employment drug test and clean driving record are required, as is a DOT physical.

Arbon Equipment - A Rite-Hite Company is the global leader in the manufacture and distribution of industrial loading dock and door equipment. Our innovative products and world class sales organization ensure solid, consistent growth, both for our company and our staff. We are always looking ahead to develop innovative new products and services to improve our customers' safety, security, and productivity.

Arbon Equipment - A Rite-Hite Company provides competitive compensation and a comprehensive benefits package with medical, dental, and vision coverage along with life and paid medical leave. We also provide a retirement savings plan that combines 401(K) with company match and profit sharing. Paid holidays, vacation, and up to five paid personal/sick days per year round out the package.

Rite-Hite is an Equal Opportunity/Affirmative Action employer offering a drug free workplace for our customers and employees.

Litigation Secretary

Location: Sacramento, CA.

Pay Rate and Benefits: $80,000 to $97,000 per year, along with comprehensive benefits such as medical, dental, vision, etc.

Position Type: Full-time, Direct Hire, Hybrid (3 Days Onsite)

LHH is currently seeking a skilled Civil Litigation Secretary to join large firm in Sacramento, CA. As a Civil Litigation Secretary, you will play a crucial role in supporting our legal team in handling civil litigation matters. This position requires excellent organizational skills, a strong attention to detail, and the ability to work in a fast-paced environment.

Responsibilities:

• Provide comprehensive administrative support to attorneys and legal professionals in civil litigation matters.
• Prepare, proofread, and format legal documents, including pleadings, motions, briefs, and correspondence.
• Maintain and organize case files, documents, and records.
• Manage court deadlines and assist in calculating pre-trial dates.
• Coordinate and schedule meetings, depositions, and court appearances.
• Conduct legal research and gather relevant information from various sources.
• Assist with court filings, including e-filing in state and federal courts.
• Prepare and handle document production and discovery requests.
• Assist with trial preparation, including organizing exhibits and trial binders.

Qualifications:

• Minimum of 3 years of prior experience as a civil litigation secretary, supporting litigators in civil defense.
• Strong knowledge of civil litigation procedures and insurance defense work.
• Proficiency in court deadlines and calculating pre-trial dates accurately.
• Experience with court filings, including e-filing in state and federal courts.
• Advanced skills in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook).
• Excellent organizational skills and the ability to manage multiple tasks efficiently.
• Strong attention to detail and accuracy in document preparation.
• Effective written and verbal communication skills.
• Ability to work independently and collaboratively as part of a team.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to

The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

• The California Fair Chance Act

• Los Angeles City Fair Chance Ordinance

• Los Angeles County Fair Chance Ordinance for Employers

• San Francisco Fair Chance Ordinance

D3 Search is seeking a Litigation Paralegal on behalf of a prominent CA-based law practice with its headquartered office located in downtown Sacramento, CA (95814).

Position Title:

Litigation Paralegal

• Important Note: 5+ yrs. relevant litigation experience/expertise is REQUIRED.

Location/Map:

Sacramento, CA (95814)

Employment Status:

Full-time/direct-hire employment. Non-exempt role (OT eligible in accordance w/ CA laws).

Employer Work Model:

Flexible hybrid 3 onsite/2 remote work model.

Position Summary :

Prominent CA-based law practice is seeking an experienced Litigation Paralegal to join their headquartered Sacramento, CA offices in support of a dynamic team of business litigation attorneys. The ideal candidate is highly organized, detail-oriented, and thrives in a collaborative environment while demonstrating a first-class commitment to client service.

This position is on-site for the first 90 days. After that period, a hybrid schedule of three days in the office and two days remote may be available.

General Responsibilities:

• Create and maintain internal case databases, including importing and exporting documents, locating files, running productions, analytics, and email threading, and conducting document review and coding.
• Conduct document searches using eDiscovery platforms (e.g., Relativity) and perform factual research utilizing Westlaw and online resources.
• Manage all aspects of discovery, including organizing, reviewing, analyzing, and summarizing discovery materials; preparing and responding to discovery requests; and drafting subpoenas to third parties.
• Assist attorneys in deposition preparation by gathering relevant documents and organizing exhibits.
• Track and manage the progress of documents throughout litigation, including ordering transcripts and records from third-party entities and responding to requests from outside counsel.
• Prepare for and attend trials and arbitrations, including organizing exhibits and supporting materials, coordinating trial logistics, and assisting attorneys in the courtroom.
• Operate and manage electronic trial presentation software.
• Demonstrate strong analytical and technical skills throughout all phases of litigation.
• Assist with the preparation and filing of court documents in coordination with attorneys and legal secretaries.
• Serve as a liaison between internal departments and outside vendors.

Education & Experience:

• Minimum of 5+ years of complex litigation experience required, with an emphasis on business litigation and real estate litigation.
• Paralegal certificate from an ABA-approved program required; alternatively, qualifications meeting California Business and Professions Code §§ 6450–6456 may be considered.
• Extensive experience with electronic legal database software, such as Relativity.
• Trial experience strongly preferred, including exhibit and witness preparation, subpoena drafting, and courtroom support.
• Advanced skills in Microsoft Office (Word, Excel, PowerPoint) are required.
• Proficiency in litigation software such as CaseMap, TextMap, Relativity, Adobe Acrobat Pro, and Sanction or Trial Director.
• Familiarity with iManage or a similar document management system.
• Ability to manage multiple files and projects concurrently and to perform well under pressure.
• Self-starter who works effectively both independently and collaboratively, while providing prompt support to attorneys.
• Strong written and verbal communication skills and the ability to interact effectively with attorneys and legal professionals at all levels.

Annual Compensation/Salary & Benefits:

Starting annual salary is up to 110K (DOE/DOQ). Law firm offers a comprehensive & robust health benefits package, generous PTO, 401K, paid parking onsite, annual reviews & lucrative bonuses, etc.

If interested in this Litigation Paralegal role with this highly respected CA-based law practice headquartered in Sacramento, CA (95814), and you meet the above qualifications/requirements, please contact the following D3 rep.:

Domenic Ferrante ~ D3 Search

| 213-785-2485

Legal Search, LLC (aka D3 Search) and its clients are equal opportunity employers. Pursuant to local ordinances, we will consider qualified applicants with criminal histories in a manner consistent with the requirements of the Fair Chance Initiative for Hiring Ordinance.