Engineering Jobs Full Time Jobs in Compton
576 positions found — Page 13
The Administrator is responsible for the overall daily management and operation of the clinic. The Administrator reports directly to first line regional operational management which may be an Area Director, Regional Director, or Vice President of Operations, depending on the region/demographics.
ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties and tasks may be assigned.
GROWTH · Develop and implement processes for program growth in accordance with Company goals. · Plan/coordinate patient scheduling to assure timely acceptance of patients and effective staffing levels. · Implement clinical and operational processes to improve patient health and minimize hospitalizations and missed treatments. · Achieve financial targets to include budget, labor costs, supply costs and expenditures.
OUTCOMES · Review all incident reports; make recommendations and take action relative to incidents as appropriate; report at monthly QAPI meeting. · Promote quality management program through education and involvement of staff and patients in outcomes as well as overall responsibility to achieve corporate goals for quality. Leads QAPI meetings and quality improvement committees. · Coordinate the functions of all departments and develop standards and methods of measuring patient care services, including a chronological record of services provided to patients as required by the ESRD Network Coordinating Council and Medicare. · Work with staff to maintain chronological, thorough, and appropriate documentation in the patient record of all treatments, activities, and communication with the patient, physician and other healthcare professionals. · Achieve program‘s target goals for patient outcomes in accordance with quality patient care and Company goals.
OPERATIONAL READINESS
· Knowledge of and remain current with federal, state, local laws and regulations, including health care professionals practice act requirements. · Assure that the clinic is in compliance with all applicable federal, state, and local laws and regulations and receives continuing certification from all statutory and regulatory agencies. · Develop, implement and follow up necessary Corrective Action Plans for internal and external surveys. · May assume Charge Nurse‘s responsibilities as needed. · Responsible for duties listed in Registered Supervising Nurse job description and nursing services policy # C-AD-0110 or must designate Registered Nurse meeting these qualifications. · May fulfill responsibility of facility CEO as delegated by Governing Body. · Conduct and/or participate in both formal and informal meetings with the governing body, Regional Director, Medical Director and the staff. Assure that appropriate staff meetings, in-service education meetings, and team patient care planning meetings are held monthly. Assure that Quality Assessment & Performance Improvement Program is current at all times. · Establish, maintain, and submit all required records and reports concerning staff, patients, and the operational affairs of the center. · Plan, coordinate, and approve effective and efficient staffing to meet patient needs and regulations. · Oversee the maintenance of equipment and supplies to meet current laws and regulations.
OPERATIONAL READINESS (cont.) · Continuously monitor to ensure that a safe and sanitary physical environment is maintained throughout the facility; that all equipment is maintained and functions properly; and that adequate and appropriate inventory levels of all supplies are available and used correctly. · Supervise the maintenance of equipment, building areas occupied by the center and other property belonging to the center. · Know and understand the water treatment and mechanisms of the equipment of the facility. · Assist, when necessary, with disinfection of equipment and supplies including bicarbonate delivery systems and dialysis machines.
PARTNERSHIPS · Monitor all contractual agreements; update as needed with corporate oversight. · Maintain collaborative working relationship with Medical Director and physicians. · Establish and maintain a positive relationship with area hospitals, agencies, vendors and the community. · Actively promote GUEST customer service standards; develop effective relationships at all levels of the organization. · Respond effectively to inquiries or complaints.
STAFF DEVELOPMENT/ RETENTION · Ensure all staff meet required qualifications for position held and perform duties within limitations established by and in accordance with company policy/procedures, health care professionals practice acts, applicable state and federal laws and regulations. · Recruit, train, develop, and supervise all personnel. · Maintain effective personnel management and employee relations, including evaluating the performance of all personnel; approving and submitting all hours worked and counseling and disciplining employees. · Uphold management goals of corporation by leading staff in team concepts and promoting a team effort. · Effectively communicates expectations; accepts accountability and holds others accountable for performance.
Qualifications/Requirements:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
Requirements include:
- Demonstrated ability to function in a leadership position and to perform in new and emergent situations with sound judgment.
- Demonstrated analytical and problem-solving skills are required.
- Strong time management and organizational skills required.
- 1 year previous dialysis management experience preferred.
- Demonstrated working knowledge of the English language and ability to communicate verbally and in writing.
- Must have basic computer skills, including Microsoft Office (Word, Excel, Outlook); proficiency in all USRC clinical applications required within 90 days of hire.
- Must meet applicable, specific state requirements. (See addendum for Administrator.
Additionally, if the nursing requirements listed below are not met, an individual may be placed in the Administrator role without them; however, in the absence of these qualifications, there must be a designated Registered Supervising Nurse at the clinic who does possess these qualifications:
- Must be full-time employee of the Company and available to clinic staff during time clinic is open.
- Current RN license in applicable state. License must be maintained as current and in good standing.
- 18 months as an RN with 6 months experience in nursing care of a patient with kidney failure.
- CPR certification required within 90 days of hire.
- Confirmation of ability to distinguish all primary colors.
- Must meet any practice requirement(s) for the applicable state. (See addendum for Registered Supervising Nurse)
All Full Time employees are eligible for the following benefits: * Medical / Pharmacy * Dental * Vision * Voluntary benefits * 401k with employer match * Virtual Care * Life Insurance * Voluntary Benefits * PTO All Part Time employees are eligible for the following benefits: * 401k with employer match * PTO
Company Description
TwinMed, LLC is a leading distributor exclusively focused on serving the post-acute care market, including skilled nursing facilities, assisted living facilities, home care, and hospice. TwinMed provides high-quality medical supplies and solutions in partnership with trusted manufacturers. The company offers customized cost containment programs to help organizations achieve financial goals without compromising operational efficiency or clinical outcomes. With a commitment to excellence and customer satisfaction, TwinMed is dedicated to supporting the healthcare community with reliable, efficient, and innovative supply chain solutions.
Role Description
This is a full-time, on-site Buyer/Planner role located in Santa Fe Springs, CA. The Buyer/Planner will be responsible for planning and procurement of medical supplies, ensuring optimal inventory levels and product availability, and maintaining strong vendor relationships. Daily tasks include analyzing demand forecasts, preparing purchase orders, coordinating with suppliers, monitoring delivery schedules, and resolving any supply chain issues that may arise. The Buyer/Planner will also work on supply chain improvement projects with cross functional team to improve supply chain visibility and efficiency.
Key Responsibilities
Purchasing:
- Source and purchase materials, equipment, and services.
- Negotiate terms, delivery, lead time, etc. with suppliers to ensure favorable outcomes for TwinMed.
- Develop contingency plans to mitigate supply chain risks.
- Maintain strong relationships with existing suppliers and source new suppliers as needed.
- Monitor supplier performance and address issues related to quality, delivery, or pricing.
Planning and Optimization:
- Utilize planning solution to forecast demand, plan inventory levels and finalize purchasing plan for multiple distribution centers.
- Actively monitor and manage planning parameters in accordance with supply chain behavior
- Balance inventory availability with cost efficiency to minimize stockouts, overstock, and obsolescence.
Cross-Functional Collaboration:
- Coordinate with sales, finance, logistics, and operations teams to align purchasing strategies with business objectives.
- Work with operations, finance and suppliers to reconcile discrepancies in receiving and invoicing.
- Support marketing initiatives by ensuring timely availability of new or promotional products.
Continuous Improvement:
- Implement opportunities to enhance planning and purchasing processes, reduce costs, and improve overall efficiency. Address and resolve challenges related to supplier delays, long lead times, and other disruptions.
- Take on special assignments as warranted.
Qualifications
- Bachelor's degree in supply chain management, business, or a related field
- 2-4 years of experience in supply chain management, procurement or planning
- Proficiency in ERP systems, supply chain planning software, and data analysis tools such as Power BI, SQL and Excel
- Strong organizational and time management skills to handle multiple tasks simultaneously
- Excellent negotiation, communication, and relationship-building skills
- Knowledge of medical or healthcare industry products is a plus
- Logical thinking with creative problem-solving ability
- APICS certification or similar supply chain credentials
Physical Requirements
Prolonged periods sitting at a desk and working on a computer.
Must be able to lift up to 15 pounds at a time.
Must pass a pre-employment background and drug screening.
Twin Med, LLC is an Equal Opportunity and Affirmative Action Employer.
Job Type: Full-time
Status: Exempt
This role is eligible for visa sponsorship (H1B, OPT/CPT, TN etc).
Benefits
- 401(k)
- 401(k) matching
- AD&D insurance
- Dental insurance
- Employee discount
- Flexible spending account
- Health insurance
- Health savings account
- Vision insurance
- Life insurance
- Paid sick time
- Vacation
Akkodis is seeking an Industrial Engineer for a Contract job with a client in Carson, CA. Ideally looking for applicants who can provide Industrial Engineering support and coordination during the development of aircraft interior components and will be responsible for determining most cost-effective methods to create products. Focal for industrialization on each new program.
Rate Range: $32/hour to $35/hour; The rate may be negotiable based on experience, education, geographic location, and other factors.
Qualifications:
Specialized knowledge
Collaboration – Establishes collaborative relationships to achieve objectives
Communication – Excellent interpersonal and communication (written and verbal) skills
Ability to work independently and follow through on assignments with limited direction; ability to work within and lead in a team oriented environment
Excellent attention to detail.
Project and general management experience
Experience in manufacturing line set-up
Self-motivated and multi-tasker; able to level load own workload.
Level 1 Qualifications:
Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering.
Experience: 0-3 years.
Computer Skills: Proficient with Windows Operating System, Office XP, AutoCAD.
Other Skills: Experience with airworthiness regulations desired. Basic Knowledge of Primary processes like CNC machining, Layup and Crush Core. Ability to work well independently and cross-functionally.
Description: Entry-level position within job field.
Level 2 Qualifications:
Education: BS in Industrial, Aeronautical, Mechanical Engineering or Manufacturing Engineering
Experience: 4-5 years.
Computer Skills: Proficient with Windows Operating System, Office XP., AutoCAD. Knowledge of design software
Other Skills: Experience with airworthiness regulations & LEAN tools such as valve stream mapping (VSM) "5S". Strong Knowledge of Primary processes like CNC machining, Layup and Crush Core.
Description: Intermediate-Mid Level position within job field.
If you are interested in this role, then please click APPLY NOW. For other opportunities available at Akkodis, or any questions, feel free to contact me at 61 or
Equal Opportunity Employer/Veterans/Disabled
Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.
To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
· The California Fair Chance Act
· Los Angeles City Fair Chance Ordinance
· Los Angeles County Fair Chance Ordinance for Employers
· San Francisco Fair Chance Ordinance
Northrop Grumman Aeronautics Systems has an opening for a Sr Principal Engineer Air Breathing Propulsion to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.
As an engineer supporting the Air Breathing Propulsion section, the selected candidate will support the design and analysis needs of unclassified and classified programs in Redondo Beach, California. Candidate will interface with customers to define study areas and report status on current programs and technology development efforts. Candidate may interface with their management and technical teams to define business relationships and technology initiatives for both IRAD (Internal Research and Development) and CRAD (Contractual Research and Development) efforts. This position will support a variety of programs performing analysis and integration activities.
Essential Functions:
- Lead engine performance and cycle analysis and provide guidance to programs
- Lead subsonic and supersonic inlet and exhaust design and integration
- Perform project planning to determine program requirements and develop plans for program execution
- Interface with external engine suppliers and manage external engine supplier activities
- Interface with internal and external customers, assisting in defining system requirements, defining study areas, and providing status on current programs and technology
- Develop and present materials for internal and external program related briefings
- Support new business generation and prepare proposal material
- Strong verbal and communication skills to interact with key cross-discipline stakeholders to achieve program objectives in a timely manner
- Technical and ICD writing
- Task planning, conducting technical peer reviews, and mentoring junior engineers
- Apply and contribute to the development of advanced technical principles, theories, and concepts.
- Work on complex technical problems and provide solutions which are highly innovative
- Collaborate and execute on long-range goals and objectives.
- Develop advanced technological ideas and guide development into a final product.
Basic Qualifications for a Sr Principal Engineer:
- Bachelor's degree in a STEM discipline (Science, Technology, Engineering or Math) with 12 years of related engineering experience; OR a Master’s degree in STEM with 10 years of related engineering experience; OR a PhD in STEM with 8 years of related engineering experience.
- Air Breathing Propulsion knowledge and experience on aircraft (subsonic, supersonic or hypersonic) or missile systems.
- Ability and willingness to travel 25% of the time.
- Must have an active DoD Secret (or higher) clearance (with a background investigation within the past 6 years or enrolled into Continuous Education).
- Must have the ability to obtain and maintain Special Access Program (SAP) clearance.
Preferred Qualifications:
- Ten plus (10+) years of experience with Aeronautical Air Breathing Propulsion and Flight Sciences engineering disciplines.
- Experience with survivable propulsion systems
- Experience in technical leadership and guidance of junior Air Breathing Propulsion engineers.
- Experience in Air Breathing Propulsion processes and products throughout the program life cycle.
- Experience in hypersonic design and analysis
- Demonstrated ability to lead an engineering cross-functional team.
- Experience with Agile design teams and tools(Atlassian)
- Understanding of Systems Engineering Principles and Model Based Systems Engineering tools (MBSE) with a practical focus for relevant use cases in propulsion integration.
- Experience with PLM software (Teamcenter)
- Serve as organization spokesperson on advanced projects and/or programs. Act as advisor to management and customers on advanced technical research studies and applications.
- A current active in-scope U.S. Government DoD Top Secret clearance with current or previous Special Program Access (SAP/PAR).
- Hybrid Position Description A Senior Load Balancer Engineer is responsible for leading and/or working on the most complex IT infrastructure, modification, installation, testing, implementation, and support of new or existing system hardware and software products.
This classification needs to plan, install, configure, test, implement and manage core system hardware and software products in support of an organization’s IT architecture and business needs.
The Senior Load Balancer Engineer, in maintenance and support of F5 Load Balancers, is responsible for the installation, configuration, and maintenance of all F5 Local Traffic Manager (LTM) and Global Traffic Manager (GTM) load balancer functions to include creating virtual servers, pools/pool members, nodes, monitors, and iRules.
The Senior Load Balancer Engineer will be responsible for all load balance support for cloud service providers (Amazon Web Services
- AWS, Microsoft Azure, and Google Cloud Platform – GCP, IBM Cloud), planning and upgrading the systems on a regular basis, checking the health of all the systems, and making necessary changes as required.
Analysing issues reported by internal/external teams and making necessary recommendations; planning and designing systems architecture; working with customers to test applications after changes.
Upgrading hardware in a timely manner with a minimum downtime window; evaluating new applications software technologies; and/or ensuring the security products are patched on a regular basis.
Skills Required The Senior Load Balancer Engineer will possess in depth knowledge of F5 VIPRION LTM, GTM systems; virtual F5 VIPRION LTM/GTMs, migration from physical to virtual F5, or other cloud-based load-balancers; VMware ARVI located at the various cloud providers, such as AWS, MS Azure, Google cloud, IBM cloud; global load balancing; local load balancing; SSL acceleration; HTTP compression/caching; and DNS.
Experience Required This classification requires a minimum of three (3) years of experience configuring, implementing, and troubleshooting F5 load balancing VIPRION based solutions for enterprise environments.
At least three (3) years as a network administrator using, configuring, implementing, and troubleshooting Cisco network equipment for enterprise environments.
At least two (2) years of experience using, configuring, implementing, and troubleshooting cloud-based load-balancers, servers, and network systems for enterprise environments.
Education Required This classification requires the possession of a bachelor’s degree in an IT-related or Engineering field.
Additional qualifying experience may be substituted for the required education on a year-for-year basis.
POSITION DESCRIPTION
This position is responsible for day-to-day compliance of safety programs and related activities at the Vernon, CA facility.
Responsibilities:
- Environmental Compliance Programs:Ensure operations are compliant with applicable federal, state, and local regulations.
- Conduct audits and training programs as needed.
- Establish a working relationship with appropriate regulatory agency personnel.
- Generate reports and permit applications (air, water, waste), ensure compliance with applicable permit requirements.
- Review proposed manufacturing changes and assess environmental impact.
- Work to reduce waste generation and support any remediation activities under the direction of the Corporate HSE Director and Regional HSE Manager.
- Health and Safety Programs:Have oversight of Industrial Hygiene, Fire Prevention LOTO, PPE, etc. Ensure that programs are in place to assist in meeting Company objectives.
- Ensure training programs and in place to ensure compliance.
- Implement accident, near miss, and observation reporting programs to proactively manage safety performance.
- Lead root cause analysis investigation and manage documentation confirm corrective actions have been put in place ensuring complete case management of injuries (reporting, workers compensation, return to work, etc.).
- Build communications required to present incident details and corrective action plans to diffident levels of the business.
- Ensure Job Safety and Environmental Analyses/Job Hazard Analysis are being conducted as required.
- Evaluate operational practices to determine methods to eliminate workplace hazards.
Qualifications:
- Bachelor’s degree in Health & Safety or the Sciences
- Min of 3+ years of Health & Safety experience 2 years in a manufacturing environment.
- Experience with OSHA, LOTO, Root Cause Analysis
- Union experience a plus
- Needs to have occasional flexibility on start time.
About the Company:
The company is a leading metal additive manufacturing (AM) partner for aerospace and defense organizations. They design, optimize, and produce mission-critical hardware that enables customers to leverage AM technologies in ways previously thought impossible. Their team supports cutting-edge programs across aviation, space, and national defense, delivering engineering excellence from concept through production.
About the Role:
The Principal Additive Manufacturing Engineer – Applications is a senior, customer-facing technical authority. You will work directly with aerospace and defense primes, OEMs, and government organizations to guide AM strategy, influence design decisions, and deliver advanced metal AM solutions for high-stakes missions. This role operates at a peer-to-peer level with senior customer engineers and plays a key part in shaping the future of AM adoption across critical defense and aerospace programs.
What You'll Do:
- Serving as the senior technical lead and trusted advisor for key aerospace and defense programs.
- Leading AM strategy, qualification plans, and adoption pathways across complex customer missions.
- Running technical design reviews, engineering workshops, and program strategy sessions with customer leadership.
- Translating mission and performance requirements into optimized metal AM solutions that balance cost, risk, and reliability.
- Developing high-impact proposals, white papers, and technical recommendations for advanced AM applications.
- Driving implementation of DfAM best practices, simulation-based optimization, and qualification approaches for mission-critical hardware.
- Working cross-functionally with business development, manufacturing, and quality teams on capture strategies and program execution.
- Acting as the primary technical interface from concept through qualification and production.
- Mentoring engineers and elevating the organization's customer-facing AM technical depth.
- Ensuring compliance with aerospace standards: AS9100D, NADCAP, MIL-SPEC, ITAR, and other regulatory requirements.
What You Need to Bring:
- Recognized expertise in metal additive manufacturing for aerospace and defense applications.
- A proven ability to influence design, qualification, and engineering decisions at primes, OEMs, and government agencies.
- Deep knowledge of LPBF/DMLS, DED, and hybrid AM processes and relevant alloys (Ti, Ni, Al, Cu).
- Strong background in aerospace materials science, metallurgy, and thermal-mechanical behavior of AM components.
- Proficiency in CAD (NX preferred), AM simulation tools, and FEA, with the ability to present technical findings clearly.
- Demonstrated success presenting to executive and non-technical customer stakeholders.
- Understanding of AS9100D, NADCAP, MMPDS, MIL-SPEC, and aerospace certification and qualification pathways.
- Leadership skills to mentor and guide engineering teams in both technical execution and customer engagement.
- Bachelor's degree required (Mechanical, Aerospace, or Materials Engineering).
- Master's degree preferred.
- 10+ years in aerospace/defense AM engineering, advanced design, or manufacturing applications.
- Eligibility to obtain and maintain a DoD SECRET Security Clearance (required for employment).
Benefits:
- Comprehensive medical, dental, and vision insurance
- 401(k) retirement plan
- Dynamic, collaborative culture focused on innovation and professional growth
Why Join:
Join a team that's redefining aerospace and defense manufacturing through innovation, collaboration, and purpose. Here, you'll:
- Work on real flight hardware that supports next-generation space and defense missions.
- Be part of a fast-growing, hands-on engineering culture where your ideas make an impact.
- Collaborate with experts across design, materials, and production to advance the frontiers of metal 3D printing.
- Access career development opportunities, advanced AM technologies, and a mission-driven environment that values curiosity and continuous learning.
Ultimate Staffing is partnering with a growing aerospace company in Signal Hill. They are looking to hire multiple CMM Programmers. This position is paying between $30 and $45 an hour based on experience and skills.
The CMM Programmer is responsible for developing, maintaining, and executing Coordinate Measuring Machine (CMM) programs using PC‑DMIS software to support inspection activities. This role ensures that manufactured components meet engineering specifications, quality standards, and customer requirements. The CMM Programmer works closely with Quality, Engineering, and Manufacturing teams to support production and continuous improvement initiatives.
Key Responsibilities
- Create, edit, and optimize CMM programs using PC‑DMIS for dimensional inspection of parts, assemblies, and tooling.
- Perform first‑article inspections (FAI), in‑process checks, and final inspections as required.
- Interpret engineering drawings, GD&T, and technical specifications to develop accurate measurement strategies.
- Set up and operate CMM equipment to validate program accuracy and ensure measurement repeatability.
- Analyze inspection results, generate detailed reports, and communicate findings to Quality and Engineering.
- Maintain CMM equipment, including calibration checks and basic troubleshooting.
- Assist in root‑cause analysis and corrective actions for dimensional non‑conformances.
- Support continuous improvement efforts by recommending measurement process improvements.
- Maintain documentation, revision control, and adherence to quality system standards (AS9100, ISO 9001, etc., if applicable).
Qualifications
- 2+ years of experience as a CMM Programmer or similar role in a manufacturing or precision machining environment.
- Proficiency with PC‑DMIS software (Required).
- Strong understanding of GD&T (Geometric Dimensioning & Tolerancing) and metrology principles.
- Ability to read and interpret complex engineering drawings and 3D models.
- Experience operating various inspection tools (micrometers, height gages, calipers, optical/comparator equipment).
- Strong problem-solving skills and attention to detail.
- Ability to work independently and collaboratively in a fast-paced environment.
Desired Skills and Experience
PC-DMIS
CMM Programming
CMM Operating
All qualified applicants will receive consideration for employment without regard to race, color, national origin, age, ancestry, religion, sex, sexual orientation, gender identity, gender expression, marital status, disability, medical condition, genetic information, pregnancy, or military or veteran status. We consider all qualified applicants, including those with criminal histories, in a manner consistent with state and local laws, including the California Fair Chance Act, City of Los Angeles' Fair Chance Initiative for Hiring Ordinance, and Los Angeles County Fair Chance Ordinance.
Job Title: Office Assistant (Contract)
Location: Santa Fe Springs, CA
Pay Rate: Up to $24/hour
Assignment Length: Contract through June 30
Schedule: Monday–Thursday 7:00 AM – 4:00 PM / Friday 6:00 AM – 2:30 PM (30-minute lunch)
Position Overview
We are seeking a detail-oriented Project Coordinator to support project administration and operational coordination within a fast-paced environment. This role will assist with project documentation, communication, and tracking while working closely with cross-functional teams including engineering, production, and warehouse operations.
Key Responsibilities
- Monitor and manage a high-volume shared inbox, responding to requests and routing inquiries to the appropriate teams.
- Communicate with internal teams through Microsoft Teams messaging to coordinate project updates and requests.
- Prepare and compile project documentation and packets, ensuring materials are complete and distributed accurately.
- Perform data entry and job code tracking, maintaining accurate records and project status updates.
- Utilize Microsoft Excel for sorting, filtering, and basic tracking of project data.
- Coordinate with engineering, production, and warehouse staff to help move projects through different stages.
- Maintain organized and accurate documentation, ensuring proper version control of project files.
- Provide general administrative and project support as needed.
Preferred Qualifications
- Previous experience supporting technical, engineering, or manufacturing teams.
- Ability to review or interpret engineering drawings is strongly preferred.
- Familiarity with NetSuite or similar ERP systems is a plus.
- Strong attention to detail, especially when handling project numbers and job codes.
- Comfortable working in an operational or warehouse-adjacent environment.
Equal Opportunity
Employer/Veterans/Disabled
To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:
• The California Fair Chance Act
• Los Angeles City Fair Chance Ordinance
• Los Angeles County Fair Chance Ordinance for Employers
• San Francisco Fair Chance Ordinance
DMF is looking for a recent Electrical Engineering graduate with a passion for electronics and circuit design to join our new product development team. In this role you will work on developing industry leading LED lighting and IOT products with exposure to everything from ideation to detailed circuit design, analysis, prototyping and validation. The candidate will be an integral part of a dynamic and growing engineering team with room to innovate, learn and grow rapidly.
This role is onsite in Carson, CA.
The salary range is $75,000 to $100,000 (based on skills/knowledge/experience).
Responsibilities:
- Support the Electrical Engineering team in the design and qualification of compact LED drivers incorporating switch mode power supplies and associated control and communication circuits.
- Execute hardware testing and report results for review.
- Perform detail circuit design, simulation and prototyping under the direction of a senior engineer.
- Troubleshoot field returns, identifying root cause of problem and potential design improvements.
- Work with a cross functional team consisting of Mechanical engineers, Firmware engineers, Industrial Designers, and Project Managers supporting the overall product development effort.
- Follow the company product development process, conduct design reviews and interface with other engineers and departments to ensure an efficient transfer from design to production.
Requirements:
- Passionate about solving problems, using technology, and building product.
- Ideally, 2 or more years of professional experience with exposure to circuit design or testing within the consumer or industrial electronics sector.
- Knowledgeable with the fundamentals of electronics, components, and circuit design
- Hands on experience with electronics through professional experience, personal projects or college assignments.
- Able to communicate in an effective and professional manner (written and oral).
- High level of maturity and organization with a healthy obsession to learn
- Experience with microcontrollers and firmware is a plus.
Responsibilities.
