Engineering Geology Jobs in None, NC

Electrical Test Engineer – Commercial Chiller Systems

Location: Charlotte NC

Job Type: Full time

Job Description

This role is responsible for the validation and certification of commercial chiller systems. The position focuses on electrical system design evaluation, instrumentation, test execution, data analysis, and compliance with applicable industry standards. Engineers will work closely with mechanical engineers, lab technicians, and quality teams to ensure chiller performance, safety, and reliability.

Key Responsibilities :

· Maintain all electrical systems fully functional to test HVAC systems (water-cooled and air-cooled chillers)

· Plan, execute, and support electrical testing of commercial chillers, including air-cooled and water-cooled systems

· Troubleshoot control circuits and low-voltage wiring on water-cooled and air-cooled chillers

· Develop and review electrical test procedures, wiring diagrams, and control schematics

· Set up and validate test instrumentation for voltage, current, power, harmonic distortion, and control signals

· Troubleshoot electrical, controls, and communication issues during system testing

· Analyze test data and prepare technical reports documenting results, issues, and corrective actions

· Support compliance testing to applicable standards (e.g., UL, IEC, AHRI, ASHRAE)

· Collaborate with design engineering teams to identify root causes and recommend design improvements

· Support factory acceptance testing (FAT), qualification testing, and reliability testing

· Ensure testing activities comply with lab safety procedures and electrical safety requirements

· Provide technical support during audits, certifications, and customer witness testing

Required Qualifications:

· Bachelor’s degree in Electrical Engineering or related field

· 3–7 years of experience in electrical testing, validation, or product development (HVAC or industrial equipment preferred)

· Strong understanding of three-phase power systems, motor drives, starters, and VFDs

· Experience with electrical test equipment (power analyzers, oscilloscopes, multimeters, data acquisition systems)

· Knowledge of control systems, PLCs, sensors, and communication protocols (Modbus, BACnet, CAN, etc.)

· Ability to read and interpret electrical schematics and wiring diagrams

· Strong troubleshooting and problem-solving skills

· Proficiency in technical documentation and test reporting

· Familiarity with lab safety standards and electrical codes (NFPA 70 / NEC)

Preferred Qualifications

· Experience with commercial chillers, large HVAC equipment, or refrigeration systems

· Familiarity with industry standards such as ASHRAE 90.1, AHRI 550/590, UL 1995, IEC 60335

· Experience working in an engineering laboratory or test environment

· Knowledge of energy efficiency testing and performance certification

· Experience with automated test systems and data analysis tools (LabVIEW, Python, MATLAB, or similar)

· Professional Engineer (PE) license or EIT certification

Key Competencies :

· Primarily laboratory-based role with exposure to high-voltage equipment and rotating machinery

· Occasional extended hours during test execution or customer witness testing

· Strict adherence to safety protocols and PPE requirements

NOVA Engineering is seeking a Geotechnical Staff Engineer to help manage a wide variety of geotechnical projects based from our Charlotte, NC office. Must be willing for travel outside of the Carolina's.

RESPONSIBILITIES

You will be part of a dynamic, growing and energized team – and your role is key to the success of NOVA Engineering. While your job duties may fluctuate day to day, here are some areas we expect to see you excel in:

• Operating and maintaining pressure meter testing equipment
• Laying out borings and test pits with conventional surveying and Global Positioning Systems (GPS)
• Observing and classifying test pits and performing hang auger borings
• Being involved in site seismic testing and Pile Driving Analyzer (PDA) testing
• Classifying samples obtained from drilling operations
• Testing, sampling, and inspecting soil
• Performing routine field and laboratory tests

QUALIFICATIONS

• Bachelor’s degree in Civil Engineering from an ABET-accredited institution, or an equivalent international degree with NCEES credential evaluation, is required.
• E.I.T. is required or ability to obtain within 3 months
• Recent graduates are encouraged to apply
• 1 - 3 years applicable experience is preferred
• Strong communication skills
• Position entails approximately 70% fieldwork and 30% office with occasional travel.

Check out our Perks:

In addition to our welcoming company culture and competitive compensation packages, our employees enjoy the below benefits:

• Comprehensive group medical insurance, including health, dental and vision
• Opportunity for professional growth and advancement
• Certification reimbursement
• Paid time off
• Company–observed paid holidays
• Company paid life insurance for employee, spouse and children
• Company paid short term disability coverage
• Other supplemental benefit offerings including long-term disability, critical illness, accident and identity theft protection
• 401K retirement with company matching of 50% on the first 6% of employee contributions
• Wellness program with incentives
• Employee Assistance Program

NOVA is an Equal Opportunity Employer. All qualified candidates are encouraged to apply. NOVA does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, disability, national origin, ancestry, marital status, veteran status or any other characteristic protected by law.

Senior Project Manager – Process Mechanical (Raleigh, NC)

Supporting a full-service industrial contractor specializing in mechanical, hygienic piping, HVAC, and electrical/instrumentation trades serving life sciences, advanced manufacturing, and food & beverage industries from design through execution, while prioritizing safety, quality, and client satisfaction.

We are seeking a Senior Project Manager to join the Process team in Raleigh, NC. This role offers an entrepreneurial environment where your leadership drives the success of multiple, large-scale projects simultaneously.

Responsibilities

• Manage fabrication and installation of process piping, utility piping, HVAC, plumbing, structural steel, equipment setting, and medical gas systems.
• Champion safety and enforce standards in healthcare, industrial, and bio-pharma environments.
• Review estimates and establish job costing systems for labor, materials, and subcontractors.
• Negotiate and manage vendor/subcontractor agreements; ensure compliance with contract specifications.
• Conduct monthly cost reviews and progress reports to ensure projects stay on time and on budget.
• Build strong relationships with clients, general contractors, subcontractors, vendors, and internal teams.
• Oversee all aspects of project planning and execution, including pre-planning meetings, scheduling, site visits, quality control, cost tracking, and change management.
• Troubleshoot installation issues and maintain client satisfaction.

Qualifications

• 10+ years of project management experience in process mechanical subcontracting (process piping, HVAC, plumbing, structural steel, equipment setting).
• Proven success managing projects of $5M or more.
• Bachelor’s degree in engineering, construction management, or equivalent experience.
• Strong planning, organizational, and technical skills.
• Proficiency in Microsoft Office and project management software.
• Excellent communication, leadership, and mentoring skills.
• Creative problem-solving and root cause analysis capabilities.
• Ability to travel approximately 30% per month.

Benefits

• Professional development and continuous learning
• 401(k)
• Health, dental, and vision insurance
• Paid time off (PTO)

Role Overview

We are seeking a technically strong Embedded Validation Engineer to serve as the Controls and Quality Assurance (QA) point of contact for lab validation and sustaining programs. The role focuses on requirements-based validation, disciplined test execution, defect reporting, and traceability across multiple product programs.

The ideal candidate will work closely with Systems Engineering, Product Development, and QA teams to validate embedded control systems, execute lab testing, and improve test automation and validation processes.

Key Responsibilities

Requirements-Based Validation

• Collaborate with Systems Engineering teams to derive validation strategies and test plans from system requirements.
• Develop and maintain requirement-to-test case traceability.
• Ensure validation activities align with product specifications and engineering requirements.

Lab Test Execution

• Serve as the Controls Validation Point of Contact (POC) for lab validation activities.
• Execute validation tests on prototype hardware and embedded control systems.
• Document test procedures and record pass/fail outcomes with technical accuracy.

Documentation & Traceability

• Maintain organized test documentation including test plans, execution logs, and validation reports.
• Ensure traceability between requirements, test cases, and defect reports.

Defect Reporting & Tracking

• Identify, document, and report defects with clear technical descriptions and reproducible steps.
• Collaborate with development teams to analyze root causes and track defect resolution.

Reporting & Quality Reviews

• Prepare concise 2–3 slide technical summaries of test results and validation findings.
• Present validation updates during PRQRB/SQA or departmental review meetings.

Test Bench & HIL Development

• Design and build test bench setups and Hardware-in-the-Loop (HIL) simulators for validation.
• Support legacy platforms and existing validation environments.

Automation Development

• Contribute to Python-based test automation and validation frameworks.
• Identify opportunities to improve test efficiency through automation.

Product Support & Continuous Improvement

• Support new product development, sustaining engineering, and validation process improvements.
• Drive enhancements in test infrastructure, lab workflows, and validation methodologies.

Required Qualifications

• Bachelor’s degree in Controls Engineering, Software Engineering, Electrical Engineering, or related field.
• 5+ years of experience in embedded systems validation, SQA, or controls testing.
• Strong understanding of Software Quality Assurance (SQA) fundamentals, including test execution and documentation.
• Experience validating embedded control systems and equipment controls.
• Hands-on experience with lab-based validation and prototype testing.
• Knowledge of controls inputs/outputs, sensors, and system interfaces.
• Experience with bench wiring, test setup, and instrumentation.
• Strong analytical skills and familiarity with engineering basics such as heat exchangers and unit conversions.
• Experience with Python scripting and test automation.

Business Area:

Seniority Level:

Job Description:

At Cloudera, we empower people to transform complex data into clear and actionable insights. With as much data under management as the hyperscalers, we're the preferred data partner for the top companies in almost every industry. Powered by the relentless innovation of the open source community, Cloudera advances digital transformation for the world's largest enterprises.

The Data Platform Pillar is the bedrock of Cloudera's technology, where we design and build the core components that let our customers store, manage, and process data with unmatched scalability, security, and performance.

One of our products, Hue, is a mature open-source SQL Assistant for querying Databases & Data Warehouses and collaboration. Many companies and organizations use Hue to quickly answer questions via self-service querying.

The Data Warehouse Experience team is seeking passionate developers to join our distributed engineering team. Our mission is to make data warehousing simple and innovative for end users, working on software development, testing, user experience, distributed systems, and scalability.You will architect and implement applications within Hue, part of Cloudera Enterprise, which includes CDP Data Platform (CDPD), the world's leading open-source data platform for mission-critical environments, as well as CDP/Data Warehouse on the public cloud. We have already released the next generation of SQL experience using container-native Hadoop services to work in a Kubernetes cluster.

As a Sr. Staff Software Engineer, you will:

• Drive Hue's architecture and technical strategy to deliver a secure, scalable, and extensible data productivity interface for enterprise analytics.

• Lead core feature development across SQL editing, data catalog exploration, visualization, workflow orchestration, and practitioner productivity tooling.

• Define and execute the AI roadmap for Hue, incorporating Cloudera SQL AI, natural-language query experiences, contextual copilots, and retrieval-augmented analytics.

• Advance intelligent SQL assistance and automation by designing foundational capabilities for query generation, optimization suggestions, and semantic data understanding.

• Champion engineering excellence through robust testing, performance optimization, observability, and enterprise-grade reliability.

• Mentor engineers and lead cross-functional collaboration with product, UX, data platform, and other teams to influence long-term strategic direction.

We are excited about you if you have:

• Bachelor's degree in
  Computer Science or equivalent, and 7+ years of experience; OR Master's degree and 5+ years of experience; OR PhD and 3+ years of experience.

• Attention to details and ability to build reliable and scalable software systems.

• 4+ years of experience in development and test.

• Effective communication and collaboration skills.

• Strong development and system skills.

• Strong critical & analytical skills.

• Experience developing in Python.

• Web development framework experience (React, Vue, Angular etc.).

• Comfortable with HTML and CSS.

• Comfortable with security.

You may also have:

• Comfortable with the Web/RPC stacks in a Cloud world

• Working knowledge of Kubernetes and microservices-based application design

• Experience in developing continuous integration pipelines

Why this role matters:

You will tackle complex distributed systems challenges, crafting the foundational software for the control and data planes that powers CDP and keeps it running at massive scale. Working at the forefront of hybrid and multi-cloud technology, you will empower data scientists, engineers, and analysts with the tools and infrastructure they need for advanced analytics and modeling.

Collaboration is key, you will work alongside brilliant minds across product, data science, and engineering to drive innovation, standardize best practices, and shape the future of enterprise AI and data platforms. This is your chance to build the future of data and see your work make a global impact.

This role is not eligible for immigration sponsorship.

What you can expect from us:

• Generous PTO Policy

• Support work life balance with Unplugged Days

• Flexible WFH Policy

• Mental & Physical Wellness programs

• Phone and Internet Reimbursement program

• Access to Continued Career Development

• Comprehensive Benefits and Competitive Packages

• Paid Volunteer Time

• Employee Resource Groups

EEO/VEVRAA

#LI-SZ1

#LI-REMOTE

Join the Legacy – Build the Future!

Carolina Foods, the maker of Duchess Brand snacks and the creator of one of America’s first Honey Buns, has been delivering quality and innovation for over 80 years. As a leading manufacturer of sweet baked goods, including honey buns, baked pies, fried pies, and gem donuts, we are entering an exciting phase of growth and expansion. We are looking for motivated and experienced leaders to join our journey and help shape the future!

Job Summary

The Continuous Improvement Engineer supports large-scale industrial bakery operations by driving process optimization, cost reduction, and quality improvement across high-volume, automated production lines. This role focuses on improving efficiency, reducing waste, increasing throughput, and ensuring consistent product quality while maintaining strict food safety and regulatory compliance.

Key Responsibilities

• Analyze end-to-end industrial bakery processes including mixing, fermentation/proofing, baking, cooling, slicing, and packaging
• Lead Lean, Six Sigma, and Kaizen initiatives to improve Overall Equipment Effectiveness (OEE), yield, and labor efficiency
• Identify and eliminate process variation impacting product quality, weight control, and consistency
• Reduce downtime through root cause analysis of equipment failures and process disruptions
• Develop, standardize, and maintain Standard Operating Procedures (SOPs) and work instructions
• Partner with Operations, Maintenance, Quality, and Engineering teams to implement improvements
• Use data and statistical tools to monitor KPIs (waste, scrap, throughput, changeover time, energy usage)Support automation, line balancing, and capacity expansion projects
• Ensure compliance with food safety, sanitation, and regulatory requirements (HACCP, GMP, SQF, BRC, FDA/USDA as applicable)Train production teams on continuous improvement tools and standardized processes

Required Qualifications

• Bachelor’s degree in Industrial Engineering, Food Engineering, Mechanical Engineering, or related field (or equivalent experience)
• Experience in industrial food manufacturing, preferably bakery or grain-based products
• Strong knowledge of high-speed production lines and automated equipment
• Proficiency in Lean manufacturing and continuous improvement methodologies
• Ability to analyze production data and drive fact-based decisions

Preferred Qualifications

Lean Six Sigma Green Belt or Black Belt

Experience with OEE systems, MES, or manufacturing analytics tools

Familiarity with thermal processing, dough handling, and packaging systems

Project management experience in manufacturing environments

Key Skills

Process optimization and waste reduction

Statistical analysis and problem-solving

Cross-functional leadership

Equipment and systems understanding

Change management in union or non-union environments

Physical & Work Requirements

Manufacturing environment with exposure to heat, moving machinery, and food ingredients

Ability to work on the production floor for extended periods

Occasional off-shift or weekend support during trials or implementations

Carolina Foods is an Equal Opportunity Employer. All qualified applicants will be considered regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Mechanical / HVAC Engineer

Description

Perigon is accepting resumes for a Mechanical/HVAC Engineer for a career in a consulting engineering environment working with industrial clients. The ideal candidate will have consulting experience in the design of industrial HVAC and controls, plumbing and fire protection. This position also involves being a technical point of contact with clients.   

This is a full-time position to work with our existing Mechanical Engineering staff. This position offers opportunities for career growth, training, and exposure to a wide variety of clients, processes, and technologies. 

Responsibilities

• Solving diverse and open-ended design problems facing industrial clients.
• Design of Mechanical/HVAC systems for manufacturing facilities including dust collection, fume collection, cleanroom design, energy conservation, and sustainable solutions.
• Identifying, selecting, and recommending mechanical / HVAC - related equipment and solutions for clients.
• Preparing key client deliverables; including but not limited to; design calculations, equipment specifications, technical reports, and drawing packages.
• Support of construction by responding to RFI’s, submittals and site visits.

Requirements

• BS in Mechanical Engineering
• Active PE License with NCEES record (preferred) and ability to obtain comity licensures in other States.
• 3+ years as a Mechanical/HVAC engineer with projects in manufacturing and industrial sectors.
• Proficiency with Autocad.
• Proficiency with Mechanical/HVAC software design tools (Ex: Autocad MEP, Trane Software Programs, Carrier Software Programs, etc.). Proficiency with Bentley AutoPIPE or Caesar II a plus.
• Experience with inter-discipline project coordination.

Why Join DSI Innovations?

At DSI Innovations, you’re not just another field tech—you’re a trusted expert solving real-world automation challenges in critical manufacturing environments. As a growing systems integrator, DSI invests in top-tier talent, offers high-impact technical work, and supports long-term career growth in a flexible, team-oriented culture. If you want exposure to advanced automation technologies, meaningful customer relationships, and a company that values expertise and integrity, DSI stands out.

What sets DSI apart:

• 401(k) with company match
• Comprehensive medical, dental, and vision coverage
• HSA, FSA, and dependent care options
• Paid holidays and vacation
• Life insurance and long-term disability
• All travel expenses covered + mileage reimbursement
• High-visibility work supporting essential production systems

What You’ll Do

• Design, develop, maintain, and troubleshoot control systems for industrial automation applications including PLCs, HMIs, drives, and networks
• Create and sustain automation and control system architectures
• Collaborate with engineers, project managers, and system owners to ensure projects are completed on-time and within budget
• Conduct testing and commissioning of automation systems
• Analyze system requirements for industrial automated manufacturing control systems

This is a customer-facing Automation Engineer role supporting industrial automation environments.

Minimum Qualifications Required

• Experience with a proven track record in Automation or Electrical Engineering
• Minimum of 5 years of hands-on experience working with motion control systems, and electrical control panel design
• Experience designing, developing, and troubleshooting automated manufacturing equipment/systems in industrial manufacturing facilities
• Knowledge of PLC programming, HMI design, industrial networks and ability to read electrical schematics, P&IDs and general engineering documents/drawings

Preferred Experience

• Experience designing, developing, and troubleshooting automated manufacturing equipment/systems in industrial manufacturing facilities
• Knowledge of PLC programming, HMI design, industrial networks and ability to read electrical schematics, P&IDs and general engineering documents/drawings

This role is ideal for candidates with experience as an Automation Engineer, Controls Engineer, or Electrical Engineer working with:

• PLCs (Allen-Bradley / Rockwell, Siemens, ControlLogix, PlantPAx)
• SCADA systems (Ignition, FactoryTalk View, Wonderware, WinCC, iFix)
• Industrial automation and systems integration
• Robotics (Fanuc, ABB, KUKA, Universal Robots, Yaskawa / Motoman)
• Drives, servos, and motion control
• DCS and industrial control systems

About DSI Innovations

DSI Innovations is a technical services company specializing in system design, implementation, and commissioning for industrial control and data systems. We focus on solving complex automation challenges while building long-term, mutually beneficial relationships with our customers and employees.

If you’re an Automation/Electrical Engineer looking for challenging automation work, strong compensation, and a company that values expertise and relationships, we encourage you to apply.

Ninyo & Moore, a SOCOTEC Company, is seeking an experienced Principal Geotechnical Engineer to lead a new division in Charlotte, North Carolina as General Manager and Principal-in-Charge. This role combines technical leadership, business development, and team management to drive operational and financial success.

Key Responsibilities

• :Oversee division operations, budgets, and workload planning
• .Serve as Principal-in-Charge on major projects, providing technical oversight and quality review
• .Mentor and guide project managers and technical staff
• .Manage client relationships, contracts, and project deliverables
• .Track KPIs, financial performance, and implement corrective actions as needed
• .Support business development and strategic growth initiatives

.
Qualification

• s:B.S. or M.S. in Civil or Geotechnical Engineerin
• g.10+ years of experience managing engineering projects and team
• s.Licensed Professional Engineer (PE) require
• d.Strong leadership, communication, and organizational skill
• s.Proficiency in geotechnical design softwar
• e.Ability to visit field sites as needed; valid driver’s license require

Title: Equipment Installation Mechanical Technician IV - 3 Openings

Location: Newton, NC

Duration: 12 Months

Hours: Monday - Friday 8 AM - 5 PM, Occasional OT

Travel Requirements: Project locations will range from Newton, NC and Hickory, NC

Only W2 candidates are eligible for this position. Third-party or C2C candidates will not be considered.

Scope of Position:

The Lead Equipment Installation Mechanical Technician is a senior-level technical role responsible for leading and executing complex mechanical equipment installations. This position provides on-site leadership, technical expertise, and coordination for installation projects, ensuring work is completed safely, on schedule, and in compliance with engineering specifications, quality standards, and customer requirements. The Lead Technician serves as a subject matter expert and mentor to junior technicians.

• This position is in the Engineering Project and is focused on capacity additions and the associated line installations & debug from a mechanical perspective.

• Lead and/or participate on manufacturing engineering projects and lead/support teams for the purposes of capacity installations, equipment debug, and preparing line/associated parts for Operations Receivership.

• As a leading team member, provide advanced mechanical discipline to proactively identify technical problems through root cause understanding coupled with robust industrialized solutions relative to line debug and installs.

• Leverage knowledge of mechanical and electrical engineering, machining & designing processes to improve performance of equipment/manufacturing process.

• Lead/support the development and execution of project plans to deliver timely error-free mechanical support for multi-line equipment installations

• Experienced with working along-side vendors and suppliers to resolve technical issues to protect scope, timing, and cost metrics.

• Ability to work, collaborate, cooperate, and utilize Best Practice across various functional groups on a daily basis to accomplish goals

•Interpret and work from detailed engineering drawings, schematics, blueprints, and installation manuals.

•Perform advanced mechanical tasks including rigging, leveling, precision alignment, torqueing, piping, and mechanical integration.

•Troubleshoot and resolve installation issues, equipment malfunctions, and mechanical interferences.

•Verify installations meet OEM specifications, safety codes, and quality standards.

Leadership & Coordination

• Act as on-site Lead Technician, directing daily activities of installation crews and subcontractors.

• Assign tasks, monitor progress, and ensure efficient use of labor and resources.

• Mentor and train junior technicians, providing hands-on guidance and technical instruction.

• Serve as the primary technical point of contact between field teams, engineers, project managers, and customers.

Quality & Documentation

• Conduct inspections and quality checks throughout the installation process.

• Complete installation reports, checklists, punch lists, and as-built documentation.

• Support equipment testing, startup, and customer acceptance activities.

Project Support

• Assist with installation planning, sequencing, and scheduling.

• Coordinate material handling, tools, and equipment needed for installations.

• Support continuous improvement initiatives and best practices in installation methods.

Day-to-Day Responsibilities:

• Maintain safe work practices, inform others of hazardous conditions or personal practices as expressed on project team.

• Manage and lead installation and debugging activities to meet milestone & timeline objectives for successful capacity adds.

• Design & implement mechanical solutions and process changes to improve capability of manufacturing equipment.

• Lead in or solve mechanical and process issues through data analysis, experience, and collaboration with subject matter experts

• Manage spare part identification and storeroom entry as recommended by suppliers or peer engineers, noting available spares within (2)-plant footprint.

• Develop and update engineering and operations documentation.

• Support training for the operations workforce regarding equipment or operations changes

• Perform advanced troubleshooting, diagnosis, and repair of mechanical systems, equipment, and machinery (e.g., pumps, motors, conveyors, hydraulics, pneumatics, etc.).

• Align, test, and calibrate mechanical systems after installation.

• Diagnose complex mechanical failures and recommend effective solutions.

• Interpret blueprints, schematics, and technical manuals to support troubleshooting and repair activities.

• Identify opportunities to improve equipment reliability, efficiency, and safety.

• Collaborate with other departments to implement process improvements.

Qualifications

Required Education:

• Associate's degree

• A high school degree will be considered with significant hands-on experience

Required Years and Area of Experience:

• 3+ years’ experience in new equipment installations in a manufacturing environment, start-up experiences a plus

• Experience in a fast-paced, changing environment with multiple priorities

• Strong knowledge of mechanical systems, industrial equipment, and installation techniques.

• Proven ability to read and interpret engineering drawings and technical documentation.

• Experience leading crews in industrial, manufacturing, semiconductor, energy, or similar environments.

Required Skills:

• Ability to learn new technology and processes quickly

• Strong technical fundamentals with mechanical engineering skills

• Ability to multitask and prioritize work on an independent basis in a fast-paced project install manufacturing environment.

• Proficient with PC software, including Microsoft Office Suite

• Strong communication skills

• Expertise in mechanical systems such as hydraulics, pneumatics, bearings, gear systems, and conveyor systems.

• Ability to read and interpret technical drawings, blueprints, and schematics.

• Proficiency in using hand tools, power tools, and diagnostic equipment.

• Strong problem-solving, analytical, and critical-thinking skills.

• Knowledge of safety regulations and practices in an industrial setting.

• Basic computer skills for maintaining records and using CMMS (Computerized Maintenance Management Systems).

Certifications:

• Mechatronics trades highly desired

• Relevant mechanical or industrial certifications (e.g., Millwright, HVAC, or Welding) are a plus.

• OSHA or other safety certifications may be required.

Desired Skills:

• Hands-on experience in commercial manufacturing equipment

• Project leadership/management experience (including milestone management and financial ownership)

• Experience in vendor/supplier management on-site/off-site

• Experience with CAD

• SAP, Maximo, Maintenance Leadership

• Detail-oriented and able to perform with limited supervision.

Soft Skills:

• Leadership experience in technical project management

• Ability to work & effectively collaborate within a team

• Ability to allocate/supervise resources to accomplish aggressive project milestones & timeline within specification and costs.

• Able to shift tasks quickly

• Able to prioritize and multitask

• Communicate effectively both verbal and written

Hours of work/work schedule/flex-time:

• 40 hrs. (overtime expected). Due to the project timing; overtime and periodic off-hours coverage may be necessary to successfully complete workload and interact with other team personnel.