Electronic Components Explained Jobs in Usa

POSITION SUMMARY:

The Instrumentation and Calibration Engineer has the responsibility for ensuring the site’s production instruments are operating at optimal levels and properly maintained to data collection in an FDA regulated environment. The position will be primarily responsible for ensuring all instruments are maintained in a calibrated state. Additionally, the Engineer will support general troubleshooting of production equipment/utilities, and asset management.

To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required:

• Shall adhere to all applicable regulatory requirements, including FDA, EPA, OSHA, and related safety, health and environmental procedures, policies and practices.
• Consistent support and practice of all Piramal Pharma Solutions mission, vision, and values.
• Identify and protect the original technical information as part of the company property.

KEY RESPONSIBILITIES.

• Support the Preventive Maintenance (PM) program through the creation of new PM tasks, evaluation of existing PMs for technical relevance to current asset problems.
• Help create Standard Operating Procedures (SOPs) for equipment operation, engineering analyses, PM and calibration tasks, that adhere to FDA and cGMP requirements.
• Support the management of the calibrations on production instruments, such as temperature sensors (RTDs/resistance thermometers), pressure sensors (electronic manometers, gauges), and other transmitters.
• Support root cause investigations to a detailed level required for an FDA regulated/cGMP environment, and translate these root causes to effective CAPAs that mitigate equipment risk.
• Assesses and monitors equipment for reliability of operation implementing necessary improvements
• Maintains system classification of incoming equipment with the system owner. Duties may include assembly of supplier operating and maintenance manuals, installation and operational qualification.
• Translate data from Root Cause Centered Maintenance (RCCM) data to support Autonomous Maintenance program. Train Operations personnel in Autonomous Maintenance.
• Maintain calibration records, and qualification of calibration contractor.
• Manages risk to achieve organization's strategic objectives in areas of environmental health and safety, asset capability, quality, and production.
• Conducts risk analyses routinely when production equipment is functioning outside of expected parameters
• Develops Total Cost of Ownership, Mean Time to Failure, Life Cycle Cost, Mean Time to Repair, specific to critical equipment in the production areas.
• Runs process improvement projects from design thru implementation. Apply Root Cause Centered Maintenance (RCCM) to develop improved preventive maintenance tasks.
• Executes changes through to completion, from initiation of change controls to revising SWIs, coordinating work with Maintenance/Engineering, etc., to close out of CCs
• Collaborates with other departments to ensure that reliability is integrated into all aspects of the organization
• Participates in and execute qualification and validation of equipment and processes

EDUCATION/EXPERIENCE.

• Bachelor’s degree in an engineering discipline and 3 years of experience in a related or similar field, or
• Associate’s degree in an engineering or scientific discipline and at least 5 years of experience.

JOB COMPETENCIES.

• Analytical thinking: the ability to think critically and logically, as well as the ability to work with large sets of data and make sense of them.
• Technical aptitude: a strong understanding of the systems, equipment, and processes at hand. This includes knowledge of the engineering principles and specific systems used at an organization.
• Mechanical aptitude: an understanding of how mechanical components fit together and support the function of equipment. Demonstrated curiosity for how production equipment functions.
• Problem-solving: the ability to think creatively and come up with innovative solutions to complex problems. Specific experience applying Root Cause Analysis and Root Cause Investigation concepts to determine root causes and create effective corrective actions.
• Communication: the ability to explain technical concepts in a clear and understandable manner, as well as the ability to collaborate effectively with others. The ability to generate highly technical equipment maintenance into work instructions for Maintenance Technicians.
• Time management: the ability to manage multiple projects and tasks simultaneously and effectively including planning, scheduling, and organizing. Preferred experience in the Agile Project Management System.
• A continuous improvement mindset: identifying and implementing ways to continuously improve reliability.
• An understanding of lean manufacturing principles, and applying Six Sigma concepts to chemical manufacturing.
• Safety-conscious: the ability to identify potential hazards and take the necessary steps to mitigate them.
• Knowledge of CMMS system and functions
• Knowledge of the regulations and their application to instruments that gather GMP data in a production environment.

ESSENTIAL DUTIES AND RESPONSIBILITIES

The essential functions include, but are not limited to the following:

· Support the execution of the Commissioning, Qualification, and Validation activities for our new Vial Filling system (e.g., washing/depyrogenation, aseptic filling, isolator/VPHP, glove integrity testers, environmental monitoring systems), including SAT, IQ/OQ, PQ, and Aseptic Process Simulation.

· Management of Equipment Vendors, including project execution, on-site maintenance and calibration visits, vendor-supplied training of operation and maintenance staff, management of continuous improvement projects, and spare parts criticality assessments.

· Responsible for delivering cycle development for the process including VPHP cycles for Isolator & transport systems, and preparation of required GMP documentation for filling process and recipes.

· Support the establishment of an electronic batch record system for filler and isolator setup, operation, and changeover.

· Support the transition from project to sustaining manufacturing and the ramp-up of production volumes in the future by improving equipment reliability through Continuous Improvement and TPM processes.

· Coordinate technical deliverables within the Aseptic Operations team to support successful process and product launches.

· Lead and participate in cross-functional groups to investigate and resolve technical issues, drive continuous improvement, and process optimization using tools such as DMAIC and FMEA.

· Manage change in the Vial Filling and/or Nest Filling areas as per site change control procedures.

· Participate in regulatory inspections e.g. FDA, DEA inspections as a Subject Matter Expert (SME).

BASIC QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES)

· Bachelor’s degree in engineering, Materials Science, Biology, or related discipline.

· Minimum 4+ years working in a cGMP environment, i.e. pharmaceutical.

· Exposure to parenteral processing equipment and operations, including formulation, filling, visual inspection, and packaging equipment.

· Front-line support of aseptic filling equipment and/or barrier systems, e.g. isolator or RABS.

· Demonstrated ability to solve technical problems and implement projects.

· Excellent interpersonal and communication skills across various levels of the organization.

· Strong Mechanical Aptitude.

· Interact with other functions (e.g. Manufacturing, Automation, Quality Assurance, R&D) and must be able to take ownership of and follow through on assigned projects.

· Ability to execute on-the-floor activities such as FAT, SAT, IQ/OQ, and Engineering batches.

· Willingness to adapt to changing priorities as project demands change.

· Ability to explain complex technical issues to external customers/agencies.

PREFERRED QUALIFICATIONS

· SME-level knowledge of high-speed aseptic filling and barrier system technology (isolator, RABS).

· Expertise in single-use components in drug product formulation, sterile filtration, and aseptic filling applications.

· Demonstrated management and delivery of large capital projects ($1MM +).

· Experience with greenfield facility Commissioning, Qualification, and Validation (CQV) and production startup desired.

HVAC Service Technician

Job description:

FULL MEDICAL *** FAMILY OWNED & OPERATED *** LOCAL JOBS *** NORMAL HOURS *** NO HIGH-PRESSURE SALES

Cranford Plumbing, Heating and Cooling is an established high-end Plumbing, Heating, and Cooling Company looking for experienced and reliable HVAC Service Technicians and Installers to join our team. We service Union County and stay very local.

RESPONSIBILITIES OF THE HVAC TECHNICIAN:

• Diagnose and repair of electronic, mechanical and electrical components of these systems.
• Travel to job sites in service area, and work with dispatch to ensure schedule is maintained and delays are properly communicated with customer.
• Maintain proper stock parts, tools, and safety equipment in the vehicle.
• Understand company pricing and generate appropriate customer invoice at job site. Obtain correct customer information including email address.
• Diagnose diverse service issues, obtain any replacement parts, calibrate system to manufacturer's recommendations, and explain fully to customer what the issue is and what is needed to correct.

REQUIRED SKILLS:

• 3+ years of experience in installation, maintenance, and troubleshooting and correcting diverse HVAC issues.
• Good analytical skills and attention to detail with ability to read and interpret blueprints, plans and manuals.
• Excellent customer service skills with desire to exceed customer expectations.
• Ability to work independently in a timely manner, making sure job is done correctly the first time.
• MUST speak English. Bilingual in English/Spanish is a plus.

BENEFITS AND COMPENSATION:

• Excellent Competitive Pay
• 100% of individual Health Insurance paid by company
• SPIFs and bonuses
• No high pressure sales
• Flexible weekend rotation
• Job security
• 401K
• Vacation, PTO, Holiday Pay
• Work normal business hours - 8 AM to 4:30 PM, Monday - Friday
• Work Local - Stay Local

Apply online or Call! 9

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Retirement plan

Hybrid: Applicants must be a California resident as of their first day of employment.

PRINCIPAL RESPONSIBILITIES:

Member Services Representatives (MSR) are the first point of contact for our members' primary contact with the Alliance for both routine and complex member issues with the goal of delivering excellent customer service to our customers. The position is responsible for answering a high volume of inbound and outbound calls in a timely manner. Respond to all communications coming into Member Services in the form of email, fax, letters, chat and phone calls. Timely responses to all member communication are essential. Must effectively prioritize and flex the workload as new communication and tasks are submitted. Identify the caller's needs, clarify information, research issues, and provide solutions and/or alternatives whenever possible. Accurately and consistently document all conversations in the electronic database. This position is a liaison between the plan, the provider network, and other community agencies. The MSR positions are flexibly staffed classification and work is expected to be performed minimally at the MRS II level. However, the initial selection will be made at the entry level MSR I. Our more advanced level position of the series is the MSR III who will be required to perform a variety of complex matters.

Member Services Representatives are under the direction of a Member Services Supervisor, Manager and Director, and service our members through our call center as well assisting other departments with responses to member issues by initiating communication between departments to ensure action, cooperation, and compliance of managed care operations.

Member Services Representative I

This position which requires the ability to work as a team player within the Alliance and with external contacts, make sound judgments based on analysis of information, be an effective communicator, active listener and balance advocacy for the member with the policy provisions such as plan policies, EOC, regulatory guidelines, and DMHC/DHCS rules and regulations. The MSR provides courteous, professional, and accurate responses to incoming inquiries regarding network, plan benefits, eligibility, authorizations, plan services and guidelines, as well make decisions with the goal of ensuring member satisfaction and retention. The MSR performs a variety of complex functions and is also responsible for maintaining accurate and complete inquiry/grievance records in the electronic database. Maintains compliance with DMHC regulatory requirements and DHCS contractual obligations. MSR I staff who demonstrate proficiency in meeting, maintaining and exceeding principal performance objectives and metrics may be eligible to be promoted to a Member Services II or III role. Member Services Representative I staff may be eligible for promotion to Member Services Representative II or III positions once they have worked as a MSR I for a minimum of 12 months to be proficient with program and system knowledge in addition to meeting performance matrix requirements.

Principle duties and responsibilities

* Serve as the primary contact for members, providers and others for questions related to claims, benefits, authorizations, pharmacy, member eligibility and other questions related to Alameda Alliance and provide accurate, satisfactory answers to their inquiries or concerns.

* Respond to and resolve member service inquiries and issues by identifying the topic and type of assistance the caller needs such as benefits, eligibility, claims, behavioral health, and care coordination.

* Answer incoming calls, emails, chats, and other requests for assistance in a timely manner in accordance with departmental performance targets and provide excellent customer service while doing so. May include assisting members in person.

* Recognize and understand the difference between calls that require quick resolutions and calls which will require follow-up and handle each appropriately.

* De-escalate situations involving dissatisfied customers, offering patient assistance and support.

* Accurately document all contacts per department standards/guidelines in the Customer Relationship Management (CRM) system.

* Accurately and consistently document (electronic database) and resolve Exempt Grievances (any expression of dissatisfaction that are not coverage disputes, disputed health care services involving medical necessity, or experimental or investigational treatment and that are resolved by the next business day following receipt).

* Interface with Grievance and Appeals, Claims, Enrollment, IT, Network Management, Pharmacy, Authorizations, and other internal departments to provide Service Excellence to our members.

* Help guide and educate members about the fundamentals and benefits of managed health care topics, to include managing their health and well-being by selecting the best benefit plan service options, maximizing the value of their health plan benefits, and choosing a quality care provider.

* Intercede with care providers (doctor's offices) on behalf of the member, assisting with appointment scheduling; connect members with internal Case Management Department for assistance as needed.

* Assist members in navigating , the Member Portal, and other health care partner online resources and websites to encourage/reassure them to use self- service tools that are available.

* Manage any issues through to resolution on behalf of the member, either on a single call or through comprehensive and timely follow-up.

* Research complex issues across multiple databases and work with support resources to resolve member issues and/or partner with others to resolve escalated issues.

* Provide education and status on previously submitted pre-authorizations or pre- determination requests for both medical and pharmaceutical benefits.

* Meet the performance goals established for the position in the areas of compliance, efficiency, call quality, member satisfaction, first call resolution, punctuality, and attendance.

* Always maintain a professional level of service to members.

* Always maintain confidentiality of information.

* Consistently support the Alliance's approach to Service Excellence by adhering to established department and company standards for all work-related functions.

* Interact positively with all Alliance Departments.

* Accurately and consistently document (electronic database) and resolve Exempt Grievances (any expression of dissatisfaction that are not coverage disputes, disputed health care services involving medical necessity, or experimental or investigational treatment and that are resolved by the next business day following receipt).

* Process MS Dept projects

* Serve as a back-up to manage the escalated calls.

* Perform other duties as assigned.

ESSENTIAL FUNCTIONS OF THE JOB

* Contacts: Receive, manage, and document telephone calls, emails, and other sources of contacts from members, potential members, and providers, and explain health plan benefits and plan rules. Describe the types of services the Alliance offers to the Member within the managed care system. Provide clarification about issues regarding patient and physician rights and how the plan operates.

* Conflict resolution: Resolve member problems/conflicts by convening with other departmental staff as needed.

* Member communications: Create and/or mail appropriate member materials and communications as needed.

* Computer: Perform ongoing data entry which assists in the maintenance of the Member Services department database to ensure data integrity.

* Comply with the organization's Code of Conduct, all regulatory and contractual requirements, organizational policies, procedures, and internal controls.

PHYSICAL REQUIREMENTS

* Constant and close visual work at desk or computer.

* Constant sitting and working at desk.

* Constant data entry using keyboard and/or mouse.

* Constant use of multi-monitor setup

* Frequent use of telephone and headset.

* Frequent verbal and written communication with staff and other business associates by telephone, correspondence, or in person.

* Frequent lifting of folders, files, binders, and other objects weighing between 0 and 30 lbs.

* Frequent walking and Standing

Number of Employees Supervised: 0

MINIMUM QUALIFICATIONS:

* Bachelor's degree or equivalent experience preferred.

* High school diploma, GED required.

* The ability to speak and understand-bilingual: Spanish/English, Cantonese/English, Vietnamese/English, Tagalog/English are required as designated.

* A bilingual proficiency exam will be administered to ensure the candidate possesses the appropriate skill level to meet requirements. The successful candidate must score 90% or higher.

MINIMUM YEARS OF ADDITIONAL RELATED EXPERIENCE:

* Minimum one year of direct customer service experience. Call center experience and managed care experience a plus

* Experience determining eligibility for financial assistance, insurance benefits, unemployment and/or other social services programs.

* Demonstrated knowledge expert of AAH Member Services policies and procedures

* Consistent record of meeting, maintaining, or exceeding monthly Departmental performance metrics.

* Consistent track record of documenting Service Requests accurately and clearly and monitoring open Service Requests to ensure responses and closure.

* Consistent record of high quality of work as demonstrated through call and documentation auditing, appropriate Call Disposition coding, as well as an overall acceptable monthly Member Satisfaction Survey result as assessed by Member Services Quality Specialist, MS Trainer and Member Services Supervisor.

* Demonstrated proficiency in current Customer Relationship Management (CRM) tool, phone system software Quality Management Solution, Pharmacy Benefits Management applications (PBM), Interpreter vendor scheduling software, delegate portal solutions and the Alliance's Member portal.

* Demonstrated ability to effectively handle the department's key special projects: Member Portal Request Processing, Kaiser PTE Requests, PCP retroactive and same month requests.

* Demonstrated ability to help members face-to-face in the field and/or at the Alliance offices (walk-ins). Also highly skilled at handling issues related to member bills, transportation set-up and benefit coordination with providers and pharmacy needs.

SPECIAL QUALIFICATIONS (SKILLS, ABILITIES, LICENSE):

* Ability to prioritize and adapt to changing situations in a calm and professional manner.

* Ability to maintain composure in stressful situations.

* Excellent problem-solving skills

* Ability to exhibit cooperation, flexibility, and provide assistance when talking to members, providers, and staff.

* Skill in basic data entry

* Ability to type 40 net words per minute: multi-task

* Manual dexterity to operate telephone, computer keyboard equipment.

* Speak English proficiently, clearly, and audibly.

* Memorize and retain information quickly; meet physical requirements

* Spell correctly

* Learn the policies, regulations, and rules applicable to business operations.

* Follow instructions, reason clearly, analyze solutions accurately, act quickly and effectively in emergency situations; operate office equipment including computers and supporting word processing, spreadsheet, and database applications.

* Excellent phone etiquette and ability to communicate clearly and concisely, both orally and in writing.

* Excellent interpersonal skills with the ability to interact with diverse individuals and flexibility to customize approach to meet all types of member communication styles and personalities.

* Strong verbal and written communication skills.

* Demonstrated ability to quickly build rapport and respond to members in a compassionate manner by identifying and exceeding member expectations (responding in respectful, timely manner, consistently meeting commitments).

* Demonstrated ability to listen skillfully, collect relevant information, determine immediate requests, and identify the current and future needs of the member.

* Must be self-motivated and able to work with minimal supervision

* Must be team-oriented and focused on achieving organizational goals.

* Proficient problem-solving approach to quickly assess current state and formulate recommendations.

* Proficient in translating healthcare-related jargon and complex processes into simple, step-by-step instructions which members can understand and act upon.

* Proficient conflict management skills to include ability to resolve issues during stressful situations and demonstrating personal resilience.

* Ability to work regularly scheduled shifts within the Alliance's hours of operation including the training period, with scheduled lunches and breaks, flexibility to adjust daily schedules; and to work over-time and/or weekends as needed.

* Medical terminology knowledge preferred

* Ability to work within a broad systems perspective

* Experience in use of various computer systems software as well as Microsoft Windows, and Microsoft Suite, especially Outlook, Word, Excel.

* Must have reliable and stable internet connection for remote work (50-100 Mbps download speeds).

Employees who interact with members of the public may be required to be tested for Tuberculosis and fully vaccinated against COVID-19 and influenza. Successful candidates for those positions/ classifications may be required to submit proof of vaccination against influenza and/or COVID-19, a negative Tuberculosis test, or request an exemption for qualifying medical or religious reasons during the onboarding process. Candidates should not present proof of vaccination until instructed to do so by the Human Resources department.

SALARY RANGE $22.88-$34.33 HOURLY

The Alliance is an equal opportunity employer and makes all employment decisions on the basis of merit and business necessity. We strive to have the best-qualified person in every job. The Alliance prohibits unlawful discrimination against any employee or applicant for employment based on race, color, religious creed, sex, gender, transgender status, age, sexual orientation, national origin, ethnicity, citizenship, ancestry, religion, marital status, familial status, status as a victim of domestic violence, assault or stalking, military service/veteran status, physical or mental disability, genetic information, medical condition, employees requesting accommodation of a disability or religious belief, political affiliation or activities, or any other status protected by federal, state, or local laws.

Job Description

As part of the Technical Services department within CAE's Civil Training and Services division, perform all preventative and corrective maintenance tasks on several CAE and non-CAE flight simulators and associated devices at the CAE Training Center. If this sounds like an amazing opportunity for you, Our Doors are Open (watch here): desktop | mobile

The incumbent will support the following roles and responsibilities:

Description

• Provide real‐time phone support to address technical issues on training center flight simulators.
• Prepare the simulator for customer training, including performing pre‐flight tests.
• Execute recurring scheduled preventive maintenance tasks.
• Perform aircraft validation tests (QTG) and create/restore system/computer disk backups.
• Diagnose and resolve complex simulator deficiencies in a timely manner.
• Identify and replace defective simulator components.
• Validate snag fixes directly on the simulator device.
• Maintain and document configuration control of both software and hardware elements.
• Work within C/Unix and Windows environments to step through code modules, identify root causes, and propose strong leads and hypotheses for resolution.
• Read and interpret electrical and electro‐mechanical drawings and design documents.
• Define technical problems, collect and analyze data, establish facts, and draw valid conclusions.
• Apply aircraft/systems knowledge to execute hands‐on fixes on Full Flight Simulators.
• Log all work regularly, objectively, and formally in a CMMS (Computerized Maintenance Management System).
• Update technical documentation and procedures when required.
• Participate in technical training courses and on‐the‐job learning.
• Lead and execute projects to improve and ensure smooth operations of the training center.

Minimum Qualifications

• DEC in Electronic, Computer Science, Aircraft Maintenance, or equivalent.
• Related experience in software and electronic modification/manipulation.
• Knowledge of Windows, Unix, C, C++, and scripting languages.
• Familiarity with basic electronic theory, principles, and electronic testing equipment.
• Excellent communication skills (verbal and written) in French and English.

Preferred Qualifications

• Knowledge of CAE software and applications (CAELIB, STARTEAM, visual systems, SIM XXI architecture).
• Understanding of hardware/software interactions as they relate to aviation simulation.
• Aeronautical knowledge, including avionics, flight dynamics, aircraft systems, and simulated systems experience.

Physical Efforts:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Below is a nonexclusive list and may be updated at any time.

• Constantly ascend or descend ladders, stairs, scaffolding, ramps, and poles
• Occasionally remain in stationary positions
• Constantly adjust or move objects up to 30 pounds
• Constantly communicating with others to exchange information
• Constantly perform repetitive motions involving wrists, hands, or fingers

Benefits

• an environment where your initiatives will be recognized and valued
• the opportunity to travel internationally
• the opportunity to work on a variety of projects on a multidisciplinary team
• the opportunity to represent the organization at external conventions and conferences
• the possibility to work from home occasionally flexible schedules
• attractive employee benefits

Expected Pay Range: $24. 61 - $27.81

CAE is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please e-mail . We will make a determination on your request for reasonable accommodation on a case-by-case basis.

E-Verify

As a Federal Contractor, CAE is required to participate in the E-Verify Program to confirm eligibility to work in the United States. If you'd like more information about your EEO rights as an applicant under the law, please click here for the EEO is the Law Poster:

Position Description

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Denver, Colorado

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $36.98 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Schedule:Thursday – Monday OR Friday – Tuesday
  
  
• Hours: Second Shift 2:30 pm – 11:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

• 
  
• On the Job Paid Training
  
  
• PPE AND UNIFORMS Issued
  
  
• TOOL and BOOT ALLOWANCE provided
  
  
• State of the Art Equipment
  
  
• Safety is Always the First Priority
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 months ago (1/29/2026 5:01 PM)

Requisition ID 2

Location (Posting Location) : State/Province CO

Location (Posting Location) : City DENVER

Location (Posting Location) : Postal Code 80239

Category Technicians/Service Employees4

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $36.98/Hr.

Max Pay USD $36.98/Hr.

Position Description

Immediately hiring a Permanent Full-Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Hartford, Connecticut

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $25.25 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
  
  
• Tool Box/Tool Allowance
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 3:00 pm – 11:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Hartford T2” to 9 to speak with your recruiter today.

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Stop In and Meet the Team at the Ryder Shop: 185 West Service Rd. Hartford, CT 06120

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 week ago (3/12/2026 3:35 PM)

Requisition ID 2

Location (Posting Location) : State/Province CT

Location (Posting Location) : City HARTFORD

Location (Posting Location) : Postal Code 06106

Category Technicians/Service Employees4

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $25.25/Hr.

Max Pay USD $25.25/Hr.

Position Description

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Trailer Technician to support our Truck Fleet at Ryder in Hurricane, Utah.

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $26.00 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Trailer Experience REQUIRED
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: First Shift 8:00 am – 4:30 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 month ago (2/3/2026 4:12 PM)

Requisition ID 2

Location (Posting Location) : State/Province UT

Location (Posting Location) : City HURRICANE

Location (Posting Location) : Postal Code 84737

Category Technicians/Service Employees4

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $26.00/Hr.

Max Pay USD $26.00/Hr.

Position Description

Immediately hiring a Permanent Full Time Experienced Mid-Level Diesel Technician to support our Truck Fleet at Ryder in Opelika, Alabama

Call Nick or text “Opelika T2” to 9

Hear it from a Ryder Technician Employee Here:

• 
  
• Hourly Pay: $24.45 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $1250 at 30 days and $1250 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: First Shift 7:30 am – 4:00 pm
  
  

We want the right Maintenance Repair Mechanic to join us at Ryder to work on Heavy Duty Vehicles.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions?

Call Nick or text “Opelika T2” to 9 to speak with your recruiter today

We have all the benefits other shops do without the wait!

• 
  
• Annual Merit Pay Increases Every Year
  
  
• On the Job Paid Training
  
  
• Medical, Dental, Vision, 401 K etc. Start at 30 Days
  
  
• We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
  
  
• Paid Time Off Starts Accruing at DAY ONE with 80 hours per year
  
  
• Additional Day Off for U.S. Military Veterans
  
  
• 401 K offers a company match
  
  
• HIGH VALUED Stock at 15 % Employee Discount
  
  
• PPE, UNIFORMS, AND BOOT ALLOWANCE PROVIDED
  
  
• Ryder Top Technician Recognition Programs rewards 12 Top Techs each year with Cash Prizes from $250 to $50,000!
  
  
• Technician Tuition Repayment Program up to $5,000! Ask your recruiter about it today!
  
  

Call Nick or text “Opelika T2” to 9 to

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work, required
  
  
• Two (2) years or more of a combination of classroom training and work experience in required experience, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A,preferred
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Performs vehicle maintenance and repair duties
  
  
• Performs standard vehicle maintenance
  
  
• Performs standard component inspections and repairs
  
  
• Performs preventive maintenance
  
  
• Diagnoses standard mechanical and electronic problems, utilizing diagnostic computer when applicable
  
  
• Identifies root cause of basic failures/conditions and perform repairs as required
  
  
• Replaces defective components as instructed
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Utilizes key functions of Shop Management System and electronic documentation available
  
  
• Works in accordance with all federal/ provincial and corporate compliance guidelines (i.e., safety, DOT, MOT)
  
  
• Performs other support duties as required to support operations. These could include but are not limited to Service Island support
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 2 days ago (3/17/2026 10:14 AM)

Requisition ID 2

Location (Posting Location) : State/Province AL

Location (Posting Location) : City OPELIKA

Location (Posting Location) : Postal Code 36801

Category Technicians/Service Employees4

Additional Locations (use this field to indicate if position can be domiciled in several areas) US-GA-COLUMBUS | US-GA-LA GRANGE | US-AL-ALEXANDER CITY

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000120

Min Pay USD $24.45/Hr.

Max Pay USD $24.45/Hr.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.  

The Advanced Effector Guidance Systems (AEGS) Department within Raytheon Hardware Engineering provides Electrical Systems Engineering to develop Electronic Systems solutions for products across the Raytheon portfolio. Our core electrical engineering responsibilities include architecture, requirements, integration, and test. Our core electrical engineering technologies include RF/RADAR, Navigation/IMU/GPS, Data Link/Communication, Digital, and Power. We partner with several Electrical Product Team departments that provide the detailed design of our electrical products as well as systems teams.

The AEGS Department is searching for an Electrical Subsystems Guidance Section (GS) Lead with experience leading a multi-disciplinary system design and integration team. The role of the GS Lead is to lead a cross-functional and cross-discipline team of engineers through the design cycle for development and integration of a guidance section. This role will include Control Account Management (CAM) responsibilities so Earned Value (EV) certification is required.
 

What You Will Do

• Responsible for Technical, Cost, and Schedule Execution.

• Be responsible for the technical integrity of the GS, including the Technical Data Package (TDP) development, validation, and integration

• Manage costs and schedule for GS design, verification, and hardware procurement

• Manage the technical risk for the GS

• Technical oversight of GS failure investigations

• Support component level design and test reviews

• Work environment is primarily in an office, but may include labs, field work, or a combination.

• Assignments may include guiding a team through several phases of hardware systems lifecycle such as designs and analysis; architecting new electronic systems; developing and documenting subsystem requirements and test plans; peer reviews of designs as a subject matter expert; presentations to peers, management, and government customers; and root-cause failure investigations.

• Raytheon has a strong culture of mentoring; it is expected that employees will be both mentors and mentees.

• Collaboration with both Functional and Program higher level management.

• Collaboration with Customer and Suppliers.

• Assignment may require some travel (~25%)

Qualifications You Must Have

• Typically requires a bachelor’s degree in science, Technology, Engineering, or Mathematics (STEM) and a minimum of 10 years of prior relevant experience unless prohibited by local laws/regulations

• Ten years of experience in one or more of the following areas:  

  • RF product and subassembly design, integration, and production support

  • Analog, digital, and power electronics design, integration, and production support

  • Deconvolving high level requirements into actionable design electronics and subsystem architectures

• Experience in RF sub-systems, systems engineering, requirement development, requirement validation, Circuit Card Assembly (CCA) Design, RF Test Integration (including RF Test Solutions), and/or RF Supplier Management on an effector-based product

• Active and transferable U.S. government issued Secret security clearance is required prior to start date. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance.

Qualifications We Prefer

• Prior experience as a technical leader on a complex subsystem during Engineering, Manufacturing, and Development (EMD) Phase

• Advanced degree in engineering, mathematics, physics, or related engineering degrees.

• Familiarity with Hypersonic Programs

• Systems engineering thought process with analytical skills background.

• Highly self-motivated individual that can perform multidiscipline work

• Electrical subsystems typically contain antennas, analog RF circuit cards, digital circuit cards, and configurable logic so the ideal candidate will have a background in designing and troubleshooting of one or more of these components. Ideal candidates will also have experience in project leadership, systems engineering and architecture and have a desire to grow to a higher level.

• Able to network / influence outside of the AEGS Department with other design and production support organizations, program leadership, other engineering disciplines and Manufacturing organizations.

• Interpersonal skills with the ability to interact positively with peers, suppliers, management, and customers in a production environment.

• Proven experience in balancing engineering process discipline and innovation for rapid development and program success.

• Experience working with missiles or similar systems.

• Ability to effectively work multiple tasks and priorities.

• Knowledge of mixed signal electronics.

• Practical experience in all phases of the product development lifecycle.

• Experience in developing proposals.

• Experience leading large, complex trade studies

• Experience developing and materializing conceptual designs and integrating them into a system of systems

What We Offer

Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.

This position offers relocation based on candidate eligibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms