Electronic Components Explained Jobs Remote Jobs in Usa

Akkodis is seeking a Printed Circuit Board Assembly Test Technician for a 6 Months Contract to Hire position with a client located in Binghamton NY 13905(Onsite)

Pay Range: $20/hr. - $24/hr on W2(All inclusive). (The rate may be negotiable based on experience, education, geographic location, and other factors.)

Position Summary

• The Printed Circuit Board Assembly (PCBA) Test Technician is responsible for performing complex technical functions related to the assembly, testing, troubleshooting, and repair of printed circuit board assemblies.
• This role supports departmental output objectives by operating PCBA assembly and test equipment, conducting failure analysis, and contributing to continuous improvement initiatives.

Key Responsibilities

• Perform complex technical tasks related to the assembly, testing, and troubleshooting of PCBAs.
• Operate Gen-Rad Test and Flying Probe Test machines.
• Troubleshoot failed PCBAs and assemblies to the component level.
• Utilize assembly prints, mechanical drawings, electrical schematics, and electronic test equipment including: Digital Multimeters (DMMs), Oscilloscopes, Function Generators, Power Supplies, Frequency Counters, Pressure Indicators
• Perform and document failure analysis results clearly and accurately.
• Interpret electrical schematics and/or mechanical assembly prints depending on assigned focus area.
• Demonstrate understanding of electronic component functionality.
• Apply Environmental Stress Screening (ESS) testing concepts.
• Assist in developing production documentation such as work instructions and troubleshooting guides.
• Perform minor repair and maintenance of production and test equipment.
• Provide training and technical support to production operators and technicians.
• Contribute to production goals through effective repair and quality-focused work practices.
• Maintain commitment to quality, attendance, productivity, and customer satisfaction.
• Work overtime as required to meet business demands.

Education & Experience Required:

• High School Diploma or GED
• Minimum two (2) years of experience in production and/or manufacturing environment
• Associate of Applied Science (AAS) in Electrical or Mechanical Engineering Technology
• Experience in manufacturing, testing, and troubleshooting analog and digital circuits in aircraft instruments or electronic systems

Required Skills & Competencies:

• Strong knowledge of prototype assembly drawings and blueprint reading
• Ability to perform soldering and mechanical assembly of complex, critical components
• Willingness and aptitude to become solder certified
• Knowledge of military standards and ISO 9000 quality systems
• Proficiency in electronic test equipment and measurement tools
• Strong troubleshooting and analytical skills
• Effective communication, collaboration, and interpersonal skills
• Self-motivated, fast learner, and capable of working independently
• Continuous improvement mindset with creative problem-solving abilities

If you are interested in this Printed Circuit Board Assembly Test Technician job in Binghamton NY 13905(Onsite) please contact Ashish Rajput at 61 or For other opportunities available at Akkodis, go to Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable:

The California Fair Chance Act

Los Angeles City Fair Chance Ordinance

Los Angeles County Fair Chance Ordinance for Employers

San Francisco Fair Chance Ordinance

POSITION TITLE: University Police Officer

AGENCY: University of Massachusetts Dartmouth

SALARY: Grade 15

GENERAL STATEMENT OF DUTIES AND RESPONSIBILITIES:
Patrols the buildings and grounds and adjacent areas of a State educational institution and enforces State laws as well as rules and regulations of the institution; performs related work as required. Protects safety and security of the UMD population and property.

SUPERVISION RECEIVED:
Works under the direct supervision of an employee of a higher rank who assigns and reviews work for proper performance and conformance with instructions, rules, and regulations.

DIRECT REPORTING STAFF: None

DETAILED STATEMENT OF DUTIES AND RESPONSIBILITIES:

• 
  
• Patrols the buildings and grounds of the institution at regular intervals and guards against trespass, theft, and damage to property
  
• Maintains order among visitors and students, directs traffic, issues motor vehicle citations, and enforces the parking regulations of the institution
  
• Exercises police powers in the detection and apprehension of law violators, investigates accidents and complaints, and patrols roads of the institution
  
• Serves court summons, testifies in various courts, and gives expert testimony if qualified
  
• Performs police duties at plays, dances, or at other educational institutional functions
  
• Protects other areas of a State educational institution such as dormitories, resident dining areas, etc.
  
• Prepares reports on investigations conducted and noteworthy incidents occurring during tours of duty
  
• Provides First Responder First Aid and Cardiopulmonary Resuscitation when required, and provides for the safe transportation of injured or sick persons to the nearest medical facility
  
• Performs police functions over the National Law Enforcement Telecommunications system computer network
  
• Assist Municipal police, State police and other police agencies as requested
  
• Performs other related work as required
  

QUALIFICATIONS REQUIRED AT HIRE:

• 
  
• Knowledge of the principles and correct usage of the English language including grammar, punctuation, and spelling
  
• Ability to give oral instructions in a precise, understandable manner
  
• Ability to establish and maintain harmonious working relationships with others
  
• Ability to deal tactfully with others
  
• Ability to interact with people who are under physical and/or emotional stress
  
• Ability to communicate effectively in oral expression
  
• Ability to maintain a calm manner in stressful and emergency situations
  
• Ability to make decisions and act quickly in dangerous or emergency situations
  
• Ability to exercise discretion in handling confidential information
  
• Ability to exercise sound judgment
  
• Ability to establish rapport with others
  
• Ability to follow oral and written instructions
  
• Ability to motivate others
  
• Ability to prepare general reports
  
• Ability to maintain accurate records
  
• Ability to use proper grammar, punctuation and spelling
  
• Ability to read, write and comprehend the English language
  
• Ability to work accurately with names, numbers, codes and/or symbols
  
• Ability to explain the provisions of the laws, rules, and regulations governing assigned unit activities
  
• Ability to perform arithmetical computations with speed and accuracy (addition, subtraction, multiplication and division)
  
• Ability to accurately record information provided orally
  
• Ability to gather information through questioning individuals
  
• Ability to conduct interviews
  
• Ability to gather information by examining records and documents
  
• Ability to assemble items of information in accordance with established procedure
  
• Ability to utilize investigative techniques to obtain information
  
• Ability to understand and explain the laws, rules and regulations governing assigned unit activities
  
• Ability to explain the provisions of the laws, rules, regulations, procedures, guidelines, policies and standards governing assigned unit activities
  
• Ability to establish rapport with persons from different ethnic, cultural and/or economic backgrounds
  
• Ability to analyze and determine the applicability of data, to draw conclusions and to make appropriate recommendations
  
• Ability to operate a motor vehicle
  
• Ability to coordinate the efforts of others in accomplishing assigned work objectives
  
• Ability to gather information through observing individuals
  
• Ability to give written instructions in a precise, understandable manner
  
• Ability to lift heavy objects or persons
  
• Ability to adapt to varying work situations
  
• Ability to stand and/or walk for prolonged periods of time
  
• Physical stamina and endurance
  

QUALIFICATIONS ACQUIRED ON JOB:

• 
  
• Knowledge of the types and uses of agency forms
  
• Knowledge of the laws, rules, regulations, policies, procedures, guidelines, specifications and standards governing assigned unit activities
  
• Knowledge of the geographic composition of the assigned work area
  
• Knowledge of the applications of electronic data processing in police work
  
• Knowledge of the types and uses of fire fighting equipment such as hoses, nozzles, etc.
  
• Knowledge of the methods and techniques of fire fighting
  
• Knowledge of the types and causes of fires
  
• Knowledge of the proper telephone procedures for making and receiving agency calls
  
• Knowledge of the types and availability of public and private organizations for providing health care services
  
• Knowledge of the provisions of the state laws governing administrative hearings
  
• Knowledge of the laws, rules, and court decisions governing the presentation and admissibility of evidence
  
• Knowledge of rescue methods used in firefighting
  
• Knowledge of the laws, rules and regulations governing arrest, search and seizure
  
• Skill in operating fingerprint equipment
  
• Skill in using fire fighting apparatus such as extinguishers, etc.
  
• Knowledge of interviewing techniques
  
• Knowledge of investigative techniques
  
• Knowledge of the standard methods for identifying and preserving evidence
  
• Knowledge of the safety practices and procedures followed in the use of firearms
  
• Knowledge of the types and symptoms of mental and/or emotional disorders
  
• Knowledge of the procedures followed in courtroom proceedings
  
• Knowledge of the terminology used in police work
  
• Knowledge of the principles and practices of police administration
  
• Knowledge of the standard methods used in fingerprint classification and identification
  
• Knowledge of the methods of general report writing
  
• Knowledge of the standard police procedures and techniques followed in foot and auto patrols
  
• Knowledge of the techniques used in police surveillance work
  
• Knowledge of the standard police methods used in collecting and preserving evidence
  
• Knowledge of the fundamentals of criminal investigation
  
• Knowledge of the terminology used in law enforcement work
  
• Knowledge of the types and uses of fire protection equipment such as fire alarms and sprinkler systems
  
• Knowledge of the types and application of emergency medical procedures such as cardiopulmonary resuscitation
  
• Knowledge of the terminology, codes and standard abbreviations used in connection with radio communication
  
• Knowledge of the methods and procedures followed in the security of buildings and property
  
• Knowledge of the standards procedures followed in operating fixed radio communications equipment
  
• Knowledge of the methods and techniques of vehicular and pedestrian traffic control
  
• Knowledge of the types and uses of equipment used in vehicular and pedestrian traffic control
  
• Knowledge of the standard methods and techniques of crowd management and riot control
  
• Knowledge of the methods followed in the care and maintenance of firearms
  
• Knowledge of the procedures and techniques used in transportation of prisoners
  
• Knowledge of the types and uses of devices used in restraining prisoners
  
• Knowledge of lifesaving techniques
  
• Knowledge of police inspection techniques
  
• Knowledge of clerical office practices and procedures including office record keeping
  
• Knowledge of the types and availability of public and private organizations for providing medical and legal services
  
• Skill in the use of firearms and other tactical weapons and devices used in police work such as riot batons, handcuffs, etc.
  
• Skill in operating motor vehicles at high speeds
  
• Skill in operating facsimile transmitting equipment
  
• Skill in using emergency medical equipment such as oxygen masks, resuscitators, etc.
  
• Ability to explain the procedures, guidelines, policies and standards governing assigned unit activities
  
• Ability to recognize in others the types and symptoms of mental and/or emotional disorders
  
• Ability to read and interpret legal documents such as court decisions, briefs, court opinions, etc.
  
• Ability to read and interpret such documents as maps, charts, building, plans, etc.
  
• Ability to prepare and use charts, graphs and tables
  

MINIMUM ENTRANCE REQUIREMENTS:

• 
  
• Must have completed a High School diploma or equivalent
  

LICENSE AND/OR CERTIFICATION REQUIREMENTS:

• 
  
• Must complete (and pass) the Univeristy Police entrance exam.
  
• Must be able to successfully complete or have completed a full-time Municipal Police Academy Certification or, be able to obtain a waiver from the Massachusetts Criminal Justice Training Committee before being considered. (Intermittent, Reserve Academy or SSPO do not qualify.)
  
• Must possess a valid driver's license.
  
• Must possess a Class A license to carry a firearm at the time of appointment and throughout employment.
  

ENVIRONMENTAL DEMANDS:
Ability to work at any hour and in all weather conditions or hazardous environments.

MENTAL REQUIREMENTS:
Proficiency in all phases of duties performed. Must demonstrate logical, effective problem-solving ability. Must be able to provide credible testimony in a court of law.

PHYSICAL REQUIREMENTS:

• 
  
• Physical Activity Frequency
  
• Driving Frequent
  
• Walking Frequent
  
• Running Frequent
  
• Standing Frequent
  
• Stooping Occasional
  
• Climbing Occasional
  
• Crouching Occasional
  
• Pushing Occasional
  
• Jumping Over Occasional
  
• Pulling Occasional
  
• Carrying Occasional
  
• Reaching above head Occasional
  
• Lifting/Carrying (100 lbs.) Occasional
  
• Lowering Occasional
  
• Hand-wrist and elbow motion Occasional
  
• Grasping Occasional
  
• Holding Occasional
  
• Near Vision Frequent
  
• Far Vision Frequent
  
• Color Vision Frequent
  
• Peripheral Vison Frequent
  
• Depth Perception Frequent
  
• Adjust focus Frequent
  
• Talking Frequent
  
• Hearing Frequent
  
• Smell Occasional
  

Frequency Key (hours per day): Never = 0 hours; Rare = up to 1 hour; Occasional = 1 to 3 hours; Frequent = 3 to 6 hours; Constant = 6 to 7 hours.

Good physical condition and vision, ability to hear and speak. The employee may occasionally be required to physically subdue combative subjects and must maintain a level of physical ability accordingly. Must be able to demonstrate fitness for duty as determined by physiological tests. Successfully complete an in-house 6-week field training program.

TOOLS AND EQUIPMENT USED:
Must be proficient in the operation and safety procedures of all equipment utilized by the University Police Department necessary to perform assigned tasks. Requires sufficient hand, eye, arm coordination and strength to physically restrain an adult and to operate a firearm.

REMARKS - Incumbent must satisfy all statutory requirements including but not limited to passing a physical fitness test, drug test, medical examination including a psychological component; background screening and must not have been convicted of a felony.

DEPARTMENT: University Police Department

NO. OF POSITIONS: 3

INTERNAL/EXTERNAL POSTING: Yes

STATE FUNDED: No

SALARY: $56,663.10 - $76,693.76

HOURS: M-F variable shifts

GRADE: 15

UNION: IBPO

UMass Dartmouth offers exciting benefits such as:

• 
  
• 75% Employer-Paid Health Insurance
  
• Flexible Spending Accounts
  
• Life Insurance
  
• Long Term Disability
  
• State Pension Retirement Plan
  
• Optional Retirement Savings Plans
  
• Tuition Credit (Employee, Spouse, & Dependents)
  
• Twelve (12) paid holidays
  
• Paid personal, vacation, and sick time
  
• And More!
  

Benefits for IBPO Union- IBPO

Applicants must be authorized for employment in the U.S. on a full-time basis. Employment-based visa sponsorship is not available.

To apply please submit a letter of interest, a current resume and the contact information for three professional references.

All applicants must take and pass the University Police Exam. For more information regarding the exam and University benefits, etc. please navigate to the Human Resources website at Human Resources.

The deadline for internal applicants is October 6, 2025.

The review of internal and external applications will be ongoing until the position is filled.

If you require ADA Accommodations for this exam, you may complete the request form at Accomodation Request Form immediately after applying for the position. If you have any further questions regarding Accommodation Requests, you may submit an inquiry at Submit an Inquiry. We are happy to help, however, please be aware that we need enough time verify medical necessity.

The projected start dates for these positions are after November, 2025 and after January 1, 2026.

POSITION SUMMARY:

The Instrumentation and Calibration Engineer has the responsibility for ensuring the site’s production instruments are operating at optimal levels and properly maintained to data collection in an FDA regulated environment. The position will be primarily responsible for ensuring all instruments are maintained in a calibrated state. Additionally, the Engineer will support general troubleshooting of production equipment/utilities, and asset management.

To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required:

• Shall adhere to all applicable regulatory requirements, including FDA, EPA, OSHA, and related safety, health and environmental procedures, policies and practices.
• Consistent support and practice of all Piramal Pharma Solutions mission, vision, and values.
• Identify and protect the original technical information as part of the company property.

KEY RESPONSIBILITIES.

• Support the Preventive Maintenance (PM) program through the creation of new PM tasks, evaluation of existing PMs for technical relevance to current asset problems.
• Help create Standard Operating Procedures (SOPs) for equipment operation, engineering analyses, PM and calibration tasks, that adhere to FDA and cGMP requirements.
• Support the management of the calibrations on production instruments, such as temperature sensors (RTDs/resistance thermometers), pressure sensors (electronic manometers, gauges), and other transmitters.
• Support root cause investigations to a detailed level required for an FDA regulated/cGMP environment, and translate these root causes to effective CAPAs that mitigate equipment risk.
• Assesses and monitors equipment for reliability of operation implementing necessary improvements
• Maintains system classification of incoming equipment with the system owner. Duties may include assembly of supplier operating and maintenance manuals, installation and operational qualification.
• Translate data from Root Cause Centered Maintenance (RCCM) data to support Autonomous Maintenance program. Train Operations personnel in Autonomous Maintenance.
• Maintain calibration records, and qualification of calibration contractor.
• Manages risk to achieve organization's strategic objectives in areas of environmental health and safety, asset capability, quality, and production.
• Conducts risk analyses routinely when production equipment is functioning outside of expected parameters
• Develops Total Cost of Ownership, Mean Time to Failure, Life Cycle Cost, Mean Time to Repair, specific to critical equipment in the production areas.
• Runs process improvement projects from design thru implementation. Apply Root Cause Centered Maintenance (RCCM) to develop improved preventive maintenance tasks.
• Executes changes through to completion, from initiation of change controls to revising SWIs, coordinating work with Maintenance/Engineering, etc., to close out of CCs
• Collaborates with other departments to ensure that reliability is integrated into all aspects of the organization
• Participates in and execute qualification and validation of equipment and processes

EDUCATION/EXPERIENCE.

• Bachelor’s degree in an engineering discipline and 3 years of experience in a related or similar field, or
• Associate’s degree in an engineering or scientific discipline and at least 5 years of experience.

JOB COMPETENCIES.

• Analytical thinking: the ability to think critically and logically, as well as the ability to work with large sets of data and make sense of them.
• Technical aptitude: a strong understanding of the systems, equipment, and processes at hand. This includes knowledge of the engineering principles and specific systems used at an organization.
• Mechanical aptitude: an understanding of how mechanical components fit together and support the function of equipment. Demonstrated curiosity for how production equipment functions.
• Problem-solving: the ability to think creatively and come up with innovative solutions to complex problems. Specific experience applying Root Cause Analysis and Root Cause Investigation concepts to determine root causes and create effective corrective actions.
• Communication: the ability to explain technical concepts in a clear and understandable manner, as well as the ability to collaborate effectively with others. The ability to generate highly technical equipment maintenance into work instructions for Maintenance Technicians.
• Time management: the ability to manage multiple projects and tasks simultaneously and effectively including planning, scheduling, and organizing. Preferred experience in the Agile Project Management System.
• A continuous improvement mindset: identifying and implementing ways to continuously improve reliability.
• An understanding of lean manufacturing principles, and applying Six Sigma concepts to chemical manufacturing.
• Safety-conscious: the ability to identify potential hazards and take the necessary steps to mitigate them.
• Knowledge of CMMS system and functions
• Knowledge of the regulations and their application to instruments that gather GMP data in a production environment.

ESSENTIAL DUTIES AND RESPONSIBILITIES

The essential functions include, but are not limited to the following:

· Support the execution of the Commissioning, Qualification, and Validation activities for our new Vial Filling system (e.g., washing/depyrogenation, aseptic filling, isolator/VPHP, glove integrity testers, environmental monitoring systems), including SAT, IQ/OQ, PQ, and Aseptic Process Simulation.

· Management of Equipment Vendors, including project execution, on-site maintenance and calibration visits, vendor-supplied training of operation and maintenance staff, management of continuous improvement projects, and spare parts criticality assessments.

· Responsible for delivering cycle development for the process including VPHP cycles for Isolator & transport systems, and preparation of required GMP documentation for filling process and recipes.

· Support the establishment of an electronic batch record system for filler and isolator setup, operation, and changeover.

· Support the transition from project to sustaining manufacturing and the ramp-up of production volumes in the future by improving equipment reliability through Continuous Improvement and TPM processes.

· Coordinate technical deliverables within the Aseptic Operations team to support successful process and product launches.

· Lead and participate in cross-functional groups to investigate and resolve technical issues, drive continuous improvement, and process optimization using tools such as DMAIC and FMEA.

· Manage change in the Vial Filling and/or Nest Filling areas as per site change control procedures.

· Participate in regulatory inspections e.g. FDA, DEA inspections as a Subject Matter Expert (SME).

BASIC QUALIFICATIONS (KNOWLEDGE, SKILLS, AND ABILITIES)

· Bachelor’s degree in engineering, Materials Science, Biology, or related discipline.

· Minimum 4+ years working in a cGMP environment, i.e. pharmaceutical.

· Exposure to parenteral processing equipment and operations, including formulation, filling, visual inspection, and packaging equipment.

· Front-line support of aseptic filling equipment and/or barrier systems, e.g. isolator or RABS.

· Demonstrated ability to solve technical problems and implement projects.

· Excellent interpersonal and communication skills across various levels of the organization.

· Strong Mechanical Aptitude.

· Interact with other functions (e.g. Manufacturing, Automation, Quality Assurance, R&D) and must be able to take ownership of and follow through on assigned projects.

· Ability to execute on-the-floor activities such as FAT, SAT, IQ/OQ, and Engineering batches.

· Willingness to adapt to changing priorities as project demands change.

· Ability to explain complex technical issues to external customers/agencies.

PREFERRED QUALIFICATIONS

· SME-level knowledge of high-speed aseptic filling and barrier system technology (isolator, RABS).

· Expertise in single-use components in drug product formulation, sterile filtration, and aseptic filling applications.

· Demonstrated management and delivery of large capital projects ($1MM +).

· Experience with greenfield facility Commissioning, Qualification, and Validation (CQV) and production startup desired.

HVAC Service Technician

Job description:

FULL MEDICAL *** FAMILY OWNED & OPERATED *** LOCAL JOBS *** NORMAL HOURS *** NO HIGH-PRESSURE SALES

Cranford Plumbing, Heating and Cooling is an established high-end Plumbing, Heating, and Cooling Company looking for experienced and reliable HVAC Service Technicians and Installers to join our team. We service Union County and stay very local.

RESPONSIBILITIES OF THE HVAC TECHNICIAN:

• Diagnose and repair of electronic, mechanical and electrical components of these systems.
• Travel to job sites in service area, and work with dispatch to ensure schedule is maintained and delays are properly communicated with customer.
• Maintain proper stock parts, tools, and safety equipment in the vehicle.
• Understand company pricing and generate appropriate customer invoice at job site. Obtain correct customer information including email address.
• Diagnose diverse service issues, obtain any replacement parts, calibrate system to manufacturer's recommendations, and explain fully to customer what the issue is and what is needed to correct.

REQUIRED SKILLS:

• 3+ years of experience in installation, maintenance, and troubleshooting and correcting diverse HVAC issues.
• Good analytical skills and attention to detail with ability to read and interpret blueprints, plans and manuals.
• Excellent customer service skills with desire to exceed customer expectations.
• Ability to work independently in a timely manner, making sure job is done correctly the first time.
• MUST speak English. Bilingual in English/Spanish is a plus.

BENEFITS AND COMPENSATION:

• Excellent Competitive Pay
• 100% of individual Health Insurance paid by company
• SPIFs and bonuses
• No high pressure sales
• Flexible weekend rotation
• Job security
• 401K
• Vacation, PTO, Holiday Pay
• Work normal business hours - 8 AM to 4:30 PM, Monday - Friday
• Work Local - Stay Local

Apply online or Call! 9

Benefits:

• 401(k)
• Dental insurance
• Health insurance
• Paid time off
• Retirement plan