Electronic Components And Their Functions Pdf Notes Jobs in Usa

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

• 
  
• Generating Authorized Release Certificates (ARC) for multiple regulatory civil aviation authorities or Certificates of Conformance for military customers
  
• Issuing scrap certificates
  
• Conducting final inspections on electronic components, subassemblies, and processes
  
• Ensuring no defects in assembly, soldering, bonding, or finish
  
• Examining for specified characteristics (smoothness and centering of holes) or defects (scratches and chips)
  
• Performing unit shakedown to check for foreign objects and loose internal hardware.
  
• Marking defects and removing rejects, setting them aside for repair
  
• Reading and interpreting technical data such as service bulletins, component maintenance manuals, or engineering prints.
  
• Ensuring appropriate record keeping.
  
• Reviewing work order documentation for accuracy and completeness, ensuring adherence to specifications and conformance to company standards and customers' requirements.
  
• Effectively interacting with team members and support staff as well as external customers when applicable (source inspection, external approvals, etc.)
  
• 1st Shift: Monday to Friday, 8am to 4:30pm
  

• 
  
• You may occasionally need to provide weekend and holiday support to meet customer needs.
  
• In your role, you will be exposed to:
  
  • 
    
  • Products of various weights and sizes
    
  • Equipment with moving parts
    
  • Chemicals that may emit fumes
    
  
  
  
• To minimize safety risk to you and product, you must wear static-control and personal protective equipment.
  

• 
  
• Due to the nature of our work, you will need to be able to perform the following functions, with or without reasonable accommodation
  
• Distinguishing colors and meeting vision requirements
  
• Bending, stooping, reaching, turning as needed to place units in test stands, pick up totes, place units on rack, etc.
  
• Using hands for extended periods of time to perform testing and troubleshooting tasks (e.g. grasping, holding, picking, placing, twisting, fine manipulation)
  
• Must be able to work in a standing position up to 8 hours per day
  
• Must be able to lift up to 40 lbs
  
• Transporting product with or without product carts
  

• 
  
• HS diploma with a minimum of 2 years of relevant experience. In the absence of a HS diploma or GED, 4 years of relevant experience is required
  
• Familiarity with principles of Quality & Aerospace
  

• 
  
• Experience with FAA 8130 creation
  
• Experience working with SAP or any other ERP system
  
• Experience working with blueprints and/or technical drawings
  
• Solder experience
  
• Prior experience with component level troubleshooting
  
• A&P License
  

• 
  
• Medical, dental, and vision insurance
  
• Three weeks of vacation for newly hired employees
  
• Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
  
• Tuition reimbursement program
  
• Student Loan Repayment Program
  
• Life insurance and disability coverage
  
• Optional coverages you can buy: pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
  
• Birth, adoption, parental leave benefits
  
• Ovia Health, fertility, and family planning
  
• Adoption Assistance
  
• Autism Benefit
  
• Employee Assistance Plan, including up to 10 free counseling sessions
  
• Healthy You Incentives, wellness rewards program
  
• Doctor on Demand, virtual doctor visits
  
• Bright Horizons, child and elder care services
  
• Teladoc Medical Experts, second opinion program
  
• And more!
  

Nemak is a leading provider of innovative lightweighting solutions for the global automotive industry, specializing in the development and manufacturing of aluminum components for e-mobility, structure & chassis, and ICE powertrain applications.

We are currently hiring an Electrical Maintenance Technician at the Dickson, TN location.

Possible shifts are as follows:

• 11:00 p.m. - 7:00 a.m.
• 3:00 p.m. - 11:00 p.m.
• 7:00 p.m. - 7:00 a.m.

Maintenance Technician Responsibilities/Daily Duties:

• Strong focus on troubleshooting PLCs, robotics, conveyor systems, pneumatics, and motor drive.
• Adhere to lockout and tag procedures, prioritizing safety at all times
• Perform machinery repairs using a variety of tools
• Clean and lubricate machinery parts as needed
• Perform adjustments, tightening, and repairs during production breaks and work stoppages whenever possible
• Proactively monitor your area for issues and take initiative in preparing for and executing repairs problems
• Provide improvement suggestions to the area supervisor and shift engineers
• Rebuild parts and pre-stage repetitive usage items in the maintenance area
• Maintain small repetitive usage tools and rigging equipment in the maintenance area
• Proactively address pneumatic, hydraulic leaks and safety-related issues
• Communicate emergency and planned work order data promptly to maintenance supervisor or shift lead technician
• Conduct informal shift changeovers and provide relief on machines as needed
• Participate in Total Productive Maintenance (TPM) exercises, closely collaborating and supporting production operations
• Inspect, diagnose, and troubleshoot mechanical issues in hydraulic and pneumatic systems
• Install, assemble, and test machinery and equipment
• Perform routine preventive maintenance checks, inspections, and servicing on all equipment to ensure safe operations and to identify potential malfunctions in machines
• Perform repairs, replacements, and various mechanical, electrical, hydraulic, pneumatic, and welding tasks associated with various maintenance tasks
• Conduct electrical troubleshooting, machine rebuilds, and component overhauls, including dismantling, inspection, repair, or replacement of parts
• Assemble, install, or repair wiring, electrical/electronic components, pipe systems, plumbing, machinery, and equipment
• Utilize forklifts, scissor lifts, and JLG lifts as required
• Possess proficiency in installing, repairing, and maintaining equipment throughout the manufacturing process
• Preform all additional tasks assigned by the supervisor or other member of management

Preferred Knowledge and Abilities:

• Ability to read hydraulic, pneumatic, electrical, electronic schematics, and ladder diagrams
• Ability to troubleshoot and repair hydraulic, pneumatic, and electrical control systems
• Ability to interpret and troubleshoot electrical and motor controls circuits
• Knowledge of electrical machinery control, including the ability to interpret logic and program programmable controllers
• Maintenance experience ranging from two to five years
• Experience in both power distribution and hard-wire control techniques

Requirements/Qualifications:

• High School Diploma or GED
• Two (2) years of industrial maintenance experience and/or a two year technical degree/certification required
• Allen-Bradley PLC programming certification preferred
• Prior experience in an automotive manufacturing environment preferred
• Advanced mechanical knowledge of conveyors, rollers, fabrication and welding
• Advance knowledge and proven experience in PLC programing and troubleshooting
• Proficient in programming using ladder logic and HMI interfaces
• Prior experience in an automotive manufacturing environment preferred
• Successful completion of appropriate skills test, which determines the maintenance technician level
• Availability for short-notice overtime, including weekends

Job Type: Full-time

Pay: $35.63 - $42.76 per hour

Electro-Mechanical Assembly Technician

San Diego, CA (Onsite)

Direct Hire

This position pays between $65K - $75 K Per Year

JOB DESCRIPTION

• Physically build deliverable sensor systems: assemble mechanical components, solder electronic components, apply coatings to printed circuit boards, install printed circuit boards into sensor housings, precisely cut and strip wiring, mount fasteners, fasten and/or seal electro-mechanical assemblies by applying various bonding and/or sealing agents
• Perform final machining, cutting, or bonding operations on components such as sensor housing, sense elements, fine wires, etc.
• Assemble wiring harnesses and terminate connectors
• Assemble circuit boards, connectors, ribbon cables, jumpers, and other electronic components into custom-built enclosures
• Test sensors and printed circuit boards using a combination of electrical test equipment and LabVIEW-based software scripts
• Participate actively in inventory management and quarterly inventory checks
• Conduct final assembly of sensor systems onto customer driveshafts, including application of sealant, ensuring integrity of the full assembly, and certifying system fitness for homologation
• Participate in failure analyses by dissecting and analyzing hardware returned from the field, conducting diagnostic and validation testing, and comparing with original results.
• Assist in writing and issuing detailed reports outlining findings

Skill Requirements

• At least 2 years of full-time work experience in a related role
• Attention to detail and good craftsmanship, and a strong concern for quality
• Strong electrical and mechanical assembly skills
• Familiarity with wiring harness assembly protocols using AWG 20-gauge harnesses or smaller
• Familiarity with processing adhesives, soldering, and general machine shop skills
• Proficiency with LabVIEW or equivalent software
• Ability to read and interpret mechanical drawings and electrical schematics
• Understanding and knowledge of sensor or instrumentation calibration protocols
• the candidate is expected to already have a hands-on approach and a certain comfort level building and operating devices and instrumentation.
• Educational Requirements An Associate’s degree in fields such as machining, mechanical technology, electronics, automotive technology, or electronics is preferred but not required.

Applicants should apply via The Mice Groups Inc. website ( ) or through this careers site posting.

We are an equal opportunity employer and value diversity at The Mice Groups Inc. We do not discriminate on the basis of race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.

Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

Pursuant to the Los Angeles Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.

The Mice Groups Inc. values your privacy. Please consult our Candidate Privacy Notice, for information about how we collect, use, and disclose personal information of our candidates.

Privacy Policy

One of the basic principles The Mice Groups follows in designing and operating this website is that we ask for only the information we need to provide the service you’ve requested.

The Mice Groups does not currently collect personal identifying information via its website except (i) to the extent that you provide this information in an online job application and (ii) to the extent that your web browser provides personal identifying information.

The Mice Groups will use your personally identifying information solely for the purpose for which you submitted the information. The Mice Groups may, however, aggregate certain elements of your personal identifying information with the information of other users of our website to analyze the usefulness and popularity of various web pages on its website.

The Mice Groups reserves the right to change this policy at any time by posting a new privacy policy at this location. Questions regarding this statement should be directed to

• 
  
• Requires a High School Diploma or GED
  
• Soldering experience
  
• Inspection experience
  

• 
  
• Europlacer experience
  
• SMT Experience
  
• SMT Setup experience
  
• Conformal coat experience
  
• Assembly experience
  

Job Summary

The Maintenance Technician I–III is responsible for performing preventive and predictive maintenance and repairing production equipment as needed. This role also supports senior technicians with electrical and mechanical projects while ensuring safe and efficient equipment operation in a manufacturing environment.

Key Responsibilities

• Perform preventive and predictive maintenance on production equipment.
• Assist senior technicians with equipment repairs while learning best practices.
• Support small electrical and mechanical projects under the direction of the Team Lead or Supervisor.
• Follow all safety policies, procedures, and regulatory requirements.
• Ensure compliance with occupational health and safety standards and recommend improvements when needed.
• Work collaboratively with production teams to support operational efficiency.
• Repair and replace electrical, hydraulic, pneumatic, and electronic components including motors, contactors, relays, timers, switches, PLCs, light curtains, motor controls, and valves.
• Diagnose and troubleshoot faults in electrical equipment and integrated systems.
• Install and repair electrical wiring, conduits, receptacles, switch boxes, cable assemblies, and lighting fixtures.
• Maintain equipment performance and assist with managing spare parts inventory.
• Support equipment installation, setup, modification, and relocation.
• Read and interpret electrical schematics, wiring diagrams, and hydraulic/pneumatic diagrams.
• Test electrical and electronic components for voltage, current, resistance, and continuity.
• Respond to equipment breakdowns and resolve issues to prevent production downtime.
• Follow Lockout/Tagout (LOTO) procedures when servicing equipment.
• Accurately complete work orders and maintenance documentation.

Qualifications

Skills

• Experience troubleshooting electrical and mechanical equipment.
• Knowledge of PLC systems, robotics, AC/DC and servo drives, motion control, HMI interfaces, and motor controls.
• Ability to read electrical, mechanical, pneumatic, and hydraulic schematics.
• Understanding of PLC programming concepts (e.g., Siemens Step 7, Beckhoff TwinCat).
• Knowledge of electrical circuitry including relays, contactors, limit switches, and proximity sensors.
• Familiarity with Computerized Maintenance Management Systems (CMMS) is a plus.

Traits

• Strong teamwork and collaboration skills.
• Mechanical aptitude and interest in technical problem-solving.
• Excellent communication and interpersonal skills.
• Detail-oriented with strong follow-through.
• Willingness to work rotating shifts.
• Ability to support and manage small technical projects.

Education & Experience

• Minimum 2 years of relevant experience with strong troubleshooting skills.

Preferred:

• Experience in a fast-paced manufacturing or industrial environment.
• Technical trade school certificate or related military training.

• Proficiently use detailed drawings to perform product-processing functions such as assembly, soldering and labeling, following IPC standards and techniques and accurately verifying BOL's in job packets. Meet or exceed individual rework goals that are set based on yearly team averages

• Understands daily outputs with a goal of performing at or above average minutes per piece of Team

• Understand and follow the organizations Quality Management System. Keeps work area organized following 5-s work standards diligently. Participate with all sustainability efforts including waste reduction and recycling.

• Work productively and cooperatively in a team environment. Maintain strong lines of communication with your supervisor and all team members to collectively work towards team goals. Be proficient in all areas within your responsibility and offer and promote changes for improvement.

• Perform production order confirmations accurately recording Yield, Labor, Reworks and Final confirmations. Total number of individual errors must not exceed the yearly team average. Keep your Supervisor aware of any needed changes and or reasons for missing standard. Participate with any additional reporting methods used to assist the groups in the production process.

• Performs other duties as assigned

• 
  
• Multi-Tasking
  
• Sense of Urgency & Work Ethic
  
• Approachability & Perceptiveness
  
• Adaptability & Flexibility
  
• Setting Priorities & Time Management
  
• Relationships, Influence & Problem Resolution
  

Unleash Your Potential with Velocity Electronics!

We are looking for a Strategic Account Manager in Austin - Texas to deliver exceptional experience and outcomes by working with a portfolio of key customer accounts to facilitate sustainable and long-term businesses.

Key Responsibilities:

• Cultivate and maintain strategic customer relationships
• Sell a portfolio of key accounts
• Assist in the implementation of global sales and purchasing strategies
• Develop and maintain a deep understanding of the structure, culture, and needs of key customers
• Manage and facilitate own individual training, including sales, sourcing, and throughput
• Ensure customer requirements are accurately entered in Velocity's ERP system
• Consistently deliver on monthly and quarterly gross profit sales goals
• Represent and communicate Velocity's culture, values, and value proposition
• Provide immediate and reliable solutions to customer needs
• Complete detailed records of all sales data regarding contracts, quotations, and other customer interactions and annotate all customer touches in Velocity's ERP system
• Create and present periodic reports detailing customer interactions and sales/gross profit totals

Qualifications:

• High school diploma or equivalent; bachelor's degree preferred.
• 2+ years of experience in sales or business development (Preferably within the electronic components industry but not required)
• Demonstrated expertise in sourcing, product knowledge, account management, CRM
• Computer literate: experience with complex ERP systems preferred

Why Join Us:

At Velocity Electronics, our core valuesBe Amazing Today, Demonstrate Mutual Respect and Trust, Act Courageously, and Own Your Outcomesdrive our success. Are you someone who thrives in a fast-paced environment and is driven to exceed goals? At Velocity, you'll be empowered to take ownership of your success, build meaningful relationships, and drive growth through innovative solutions.

Join a top independent electronic components distributor serving the world's leading contract manufacturers and OEMs!

This is an onsite position reporting to our Global Headquarters in Austin, Texas.

Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.™

We are seeking great talent to help us build The DNA of tech.®

Vishay manufactures one of the world's largest portfolios of discrete semiconductors and passive electronic components that are essential to innovative designs in the automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. We help the world's most in-demand technologies come to life. Every day our products touch your life and the lives of people across the world, though you likely do not know it. Come join us and help us build The DNA of tech.™

Vishay Intertechnology, Inc. is a Fortune 1,000 Company listed on the NYSE (VSH). Learn more at you want to help us build the DNA of tech.? Vishay Thin Film is currently seeking applicants for a 3rd Shift Production Supervisor.

Job Location:

Vishay Thin Film is located in Niagara Falls, NY. The site has a lot of natural beauty to offer including the world-famous Niagara Falls which are just a short drive away!

What you will be doing:

• Direct supervision of Production Process and Personnel
• Administrative responsibilities for Production personnel, including timekeeping, progress review, and corrective counseling
• Monitor, evaluate and interpret data to ensure process integrity and specification compliance
• Monitor and control operation of Production Equipment
• Compile and enter production data records
• Train and develop production staff regarding policies, procedures, and related responsibilities
• Provide accurate and specific data and input to production support departments and personnel
• Meet with scheduling, engineering, and other support departments as needed

What you will bring along:

• B.S. degree or HS diploma with applicable job-related training and experience preferred
• Minimum 3-years of supervisory experience in manufacturing or related production area
• Strong technical background in related production equipment operations
• Safety and Hazardous Materials Awareness training preferred

Pay Range:

$75-80k annually

What can we offer you for your talent:

Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals. With us, you'll experience unique career paths, an open and collaborative culture, a stable business that will be there for you, and opportunities to work globally and locally.

Do you have the skills we need? Are you ready to power your career as you power the world? If so, apply today.

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as “U.S. Persons” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee.”

It is the policy of Vishay to provide equal employment and advancement opportunities to all colleagues and applicants for employment without regard to sex, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

As an equal opportunity employer, Vishay is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact assistance

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as “U.S. Persons” according to U.S. federal law.

Vishay offers a comprehensive suite of benefit programs including health care coverage, financial support programs and other resources designed to help you achieve your personal and professional goals. With us, you'll experience unique career paths, an open and collaborative culture, a stable business that will be there for you, and opportunities to work globally and locally. Do you have the skills we need? Are you ready to power your career as you power the world? If so, apply today.

Vishay is an AAP and Equal Opportunity Employer

• 
  
• Purchase direct materials such as raw materials, electronic components, plastic tubing, labels, and other production-related supplies.
  
• Issue purchase orders (POs), review purchase requisitions, and monitor open orders until delivery is complete.
  
• Evaluate vendor quotes and services to identify optimal suppliers; participate in limited price negotiation as needed.
  
• Manage and update ERP system data including lead times, quantities, and supplier information (SAP preferred).
  
• Review and act on material constraints to support production schedules and inventory targets.
  
• Address invoice discrepancies and collaborate with Accounts Payable to ensure timely resolution.
  
• Participate in weekly status reviews of inventory levels and take corrective actions with suppliers as required.
  
• Communicate and coordinate effectively with cross functional groups including Planning, Operations, Quality, and Finance.
  
• Utilize MS Office applications (Excel, Word, Outlook) to prepare reports, and track orders.
  

• 
  
• Direct Buyer experience
  
• SAP/ERP experience
  
• Reliable / ability to execute tasks with minimal supervision
  
• Ability to lead and collaborate with cross-functional groups
  
• Proactive - ability to anticipate needs and take action accordingly