Electrical Assembler Job Duties Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Integral Fuel Cell Assembly (In- Tank Mechanic) to join our Join and Installation team in Everett and Renton, Washington. 

As an Integral Fuel Cell Assembly (In-Tank Mechanic), you will play a vital role in ensuring the highest standards of quality and safety while working within the confined spaces of aircraft fuel tanks. This position requires assembling and installing structural components, systems, and sub-assemblies to meet stringent quality requirements. You will be responsible for verifying kitted parts, performing drilling, riveting, and bonding, as well as assembling plumbing and electrical systems within the tank. Your attention to detail will be crucial as you conduct continuity checks, perform necessary rework, and ensure that all installations comply with specifications. Please note that this role involves working in tight spaces, including entering the wing through a approximately 9.5" x 17.7" opening; therefore, comfort with confined spaces is essential for success in this position.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. 

Position Responsibilities : 

• Assemble and install parts, structural components, systems, and sub-assemblies to meet quality requirements for wing and horizontal stabilizer assemblies. 

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings. 

• Locate work areas using drawings, installation plans, or other paperwork that specifies airplane and section numbers. 

• Obtain and verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects. 

• Retrieve parts from the Parts Control Area or other designated locations if they are not pre-picked, ensuring they meet specifications. 

• Obtain a two-way radio and confined space flag before working in confined spaces, adhering to Communications System for Confined Hazardous Areas (CSCHA) rules and regulations. 

• Perform drilling, reaming, riveting, cold working, bonding, grounding, and sealing as necessary to complete work assignments. 

• Assemble and install aircraft plumbing and electrical systems within closed areas of the wing and horizontal stabilizer, ensuring compliance with specifications. 

• Perform pickup and rework, incorporating changes and conducting functional checks on work typically installed by lower classifications. 

• Perform continuity checks for electrical systems and hand form electrical wiring and soldering as necessary for work assignments.

• Perform final cleaning and closing of fuel cells, including vacuuming and installing fuel cell doors. 

• Locate and pre-install routing and clamping hardware for in-wing fuel tank electrical and plumbing systems as required. 

• Use precision measuring instruments to verify that quality standards are achieved. 

• Report job handicaps, such as errors in sequencing, parts, materials, and assembly procedures, following shop procedures. 

• Check work after completion of each operation to ensure assembly is complete and free of defects and remove and replace installations and related components as necessary. 

Physical Demands and Potential Hazards:  

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs. 

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. 

• Work in environments that may involve contact with metals, solvents, and coolants. 

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. 

• Adapt to varying noise levels and atmospheric conditions. 

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.  

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required . “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee  

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.  

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. 

Basic Qualifications (Required Skills/Experience):  

• 1+ years of structural experience in aerospace, automotive, maritime, construction or similar industry; this can include education and military.

• 1+ years experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel; wear hearing protection (ear inserts, canal caps, earmuffs); eye protection, and use hazardous chemicals.

• Ability to lift up to 35lbs.

• Ability to work in Confined Spaces (work within or pass through). Entry diameter 9.5”X17.7”.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications :   

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:   

High school graduate or GED preferred.  

Relocation:  

This position offers relocation based on candidate eligibility.  

Drug Free Workplace :  

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.  

Union Representation Statement:   

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.  

Shift :  

This position is for a variety of shifts.  

Total Rewards & Pay Transparency:  

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent . Elements of the Total Rewards package include competitive base pay and variable compensation opportunities .   

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work .   

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.  

Pay is based upon candidate experience and qualifications, as well as market and business considerations .   

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

About Zwack, Inc.

Since 1970, Zwack, Inc. has been a leader in the sales, service, and installation of specialized truck equipment. We pride ourselves on being a premier upfitter for over 300 municipal departments across the Northeast, as well as many private fleets. When a customer needs a heavy-duty plow, a custom dump body, or complex hydraulic systems, they come to us because we deliver quality that stands up to the toughest winters and biggest road maintenance projects.

The Role

We are looking for a skilled Highway Truck Equipment Installer to join our production team. This is a hands-on role where you will transform bare truck chassis into high-performance workhorses. You aren't just "fixing" trucks; you are building them from the frame up using a mix of mechanical assembly, welding, hydraulics, and electrical work.

Key Responsibilities

Installation: Mount and install truck bodies (dump bodies, platforms, service bodies) and equipment (snowplows, salt spreaders, hoists, and liftgates).

Fabrication: Perform welding and torch cutting to modify frames or create custom brackets and mounts.

Hydraulics: Install and plumb hydraulic pumps, valves, reservoirs, and hoses to power heavy equipment.

Electrical: Wire electrical systems, including lighting packages, strobe lights, controllers, and camera systems.

Quality Control: Test all installed equipment to ensure it operates safely and meets Zwack Inc.’s high standards and manufacturer specifications.

________________________________________

What You Bring to the Table

Mechanical Aptitude: You have a solid understanding of hand tools, power tools, and shop equipment.

Experience: Previous experience in truck upfitting, heavy equipment repair, or automotive mechanics is highly preferred.

Technical Skills:

o Proficiency in welding and metal fabrication.

o Ability to read and interpret blueprints and wiring diagrams.

o Basic knowledge of DC electrical systems.

Physical Stamina: Ability to lift up to 75 lbs, work on your feet, and navigate in and around large truck frames.

Nice to Have (Certifications & Licenses)

While not required for entry, the following are highly valued:

Welding Certifications: AWS (American Welding Society) D1.1 or equivalent.

ASE Certifications: Specifically T-Series (Medium-Heavy Truck) certifications.

CDL License: Class B or C (to assist with moving and testing heavy-duty chassis).

Fluid Power Certification: IFPS Hydraulic Specialist or Technician.

Safety Training: OSHA 10-Hour Construction or General Industry card.

________________________________________

Why Join Zwack?

Stability: We’ve been in business for over 50 years—we aren't going anywhere.

Pride in Work: See your builds on the road every time it snows or a road paving project starts.

________________________________________

Compensation & Benefits Package

We offer a compensation and benefits package designed to recognize your expertise and dedication:

Starting Wage: $18 - $30 per hour (Based on experience and skill level)

Schedule: Full-Time, Day Shift: Monday - Friday, 7:00 AM - 3:30 PM (Enjoy your evenings and weekends!)

Health Insurance: Best-in-Class Medical and Rx Plans (Company-paid coverage valued at over $7,000 annually)

Retirement: 401(k) Plan with a generous company matching contribution

Time Off: Paid PTO starting your first year (incl. an annual summer shut-down), Sick Time, and a Generous Paid Holiday Schedule

Financial Perks: Annual performance-based bonuses and bi-annual compensation reviews, discounts on personal tools and equipment

Work Environment: Provided work uniforms for comfort and safety, on-the-job training and continuing education, holiday and summer company events

Zwack, Inc. is an Equal Opportunity Employer.

Interested? Apply in person at our Stephentown facility or submit your resume via office @

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Title: Electro-Mechanical Assembler

Duration: 12 Months

Location: Milpitas, CA

Pay Rate: $27- $30/hr.

Intelliswift Software Inc. conceptualizes, builds, and supports the world's most amazing technology products and solutions. Our team of rich experts from diverse backgrounds contributes to making Intelliswift one of the most reliable partners in IT and Talent solutions. We specialize in delivering world-class Digital Product Engineering, Data Management and Analytics, and Staffing Solutions services to Fortune companies, SMBs, ISVs, and fast-growing startups.

Job Description:

We are looking for Associate Test Engineers for various positions in manufacturing who will be involved with the testing of new technologies such as optics/opto-mechanical, assembly, electrical/PCB, alignment, and system integration. In these positions you will work on assignments that are moderately complex in nature where judgment is required to resolve problems and make routine recommendations.

• Perform set-up, calibration, testing and troubleshooting of mechanical assemblies at system level.
• Determine and may develop methods and procedures from blueprints, drawings and diagrams.
• Test and troubleshoot assemblies and/or final systems, and complete rework on assemblies and/or systems as a result of testing.
• Prepare technical reports summarizing findings and recommending solutions to technical problems. May assist in the selection and set-up of specialized test equipment.
• Work on assignments that are moderately difficult, requiring judgment in resolving issues or in making recommendations.
• Perform ongoing daily work with minimal instruction, and with general instructions on newly introduced assignments.
• May provide work assignment direction and technical training to peers.

Qualifications (What we need to see):

• You have hands-on experience in electro-mechanical assembly, testing, troubleshooting and repair.
• Ability to work in a clean room environment is required.
• You have experience with systems development and testing, including formulating system level requirements, test specifications and test results.
• Hands on experience using Oscilloscopes and DVM analysis tools and equipment is preferred.
• You are able to use and manipulate a variety of fine adjustment hand tools, torque wrenches and calipers.
• You work effectively across different functional teams in different locations.
• You demonstrate excellent written and oral interpersonal skills in English.
• You demonstrate excellent organization skills, with a logical approach to problem solving, good time management and task prioritization.
• You are dedicated and able to work with a minimum of supervision.
• You hold a Technical Certificate, or AS degree, or military technical training experience, or equivalent vocational training in a technical discipline and a minimum of 5 years of related experience. A BSEE, BSEET or similar degree in an engineering discipline is strongly preferred.

Equal Employment Opportunity Statement

Intelliswift celebrates a diverse and inclusive workforce. We offer equal employment opportunities to all applicants and employees. All qualified applicants will be considered regardless of race, color, sex, gender identity, gender expressions, religion, age, national origin or ancestry, citizenship, physical or mental disability, medical condition, family care status, marital status, domestic partner status, sexual orientation, genetic information, military or veteran status, or any other protected basis under the law.

Americans with Disabilities Act (ADA)

If you require a reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please contact Intelliswift Human Resources Department

Other Employment Statements

Intelliswift participates in the E-Verify program.

Learn More

For information on Intelliswift Software, Inc., visit our website at

• 
  
• 
  70% Transformer Core Assembly
  • 
    
  • Perform the assembly of transformer cores by stacking laminations according to engineering drawings and work instructions.
    
  • Install and secure the lower yoke and columns, ensuring proper alignment and fit.
    
  • Precisely place oil channels, insulation, and other specified materials within the core structure as per design specifications.
    
  • Operate overhead cranes, forklifts, and other material handling equipment to safely move and position heavy transformer components.
    
  
  
  
• 
  30% Safety, Quality, and Process Adherence
  • 
    
  • Adhere strictly to all company safety policies, procedures, and quality assurance standards during assembly tasks.
    
  • Read and interpret engineering drawings, schematics, and manufacturing procedures to ensure accurate and compliant assembly.
    
  • Participate in specialized training programs for Large Power Transformer manufacturing and engage in cross-training for new processes.
    
  • Maintain a clean, organized work area and report any equipment malfunctions or process deviations to the team supervisor.
    
  
  
  

• 
  
• High School Diploma or GED required; prior experience in heavy industrial manufacturing, fabrication, or assembly preferred.
  
• Strong ability to operate overhead cranes and forklifts; blueprint?reading experience highly desirable.
  
• Technical skills include engineering drawings, mechanical assembly, electrical transformers, and material?handling equipment operation.
  
• Experience working with electrical equipment and applying quality control standards.
  
• Knowledge of electrical safety and continuous improvement processes.
  
• Behavioral strengths include accountability, troubleshooting/problem?solving, and analytical skills.
  

• 
  
• Career growth and development opportunities
  
• Supportive work culture
  
• Company paid Health and wellness benefits
  
• Paid Time Off and paid holidays
  
• 4 01K savings plan with company match
  
• Family building benefits
  

• 
  
• The employee is regularly required to sit.
  
• The employee is occasionally required to walk and stand.
  
• The employee frequently is required to use hands to reach, handle or feel objects.
  
• The employee is regularly required to talk and hear.
  
• The employee must regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds.
  
• Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to focus.
  

• The employee may occasionally work near moving mechanical parts. The noise level in the work environment is usually at moderate levels.

• 
  
• HS diploma or equivalent
  
• Ability to apply common sense in performing job
  
• Ability to understand and follow basic instructions and guidelines
  
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  
• Ability to use basic high school math skills
  
• 2-4 years cable assembly experience
  

• 
  
• Good coordination and flexibility in both hands
  
• Move and occasionally lift up to 50lbs. or more
  
• Good vision including passing color blindness test
  

• Factory environment

• 
  
• Use of safety glasses
  
• Use of steel protective shoes or protective shoe covers
  

• 
  
• ERP and Time clock system Overview
  
• Teledyne Ethics and Harassment training
  
• Hazardous Communications
  
• Quality Systems
  

• 
  
• A competitive benefits package including 401(k) matching
  
• Company provided life insurance, short and long-term disability insurance
  
• Paid time off at start
  
• Paid holidays
  
• Tuition reimbursement
  
• Employee referral program.
  

• 
  
• Secures and maintains component parts and supplies required for the operation.
  
• Fits parts together in accordance with prescribed manner and in accordance with quality standards.
  
• Operates presses and machinery or hand tools as required to complete assembly process.
  
• Stacks completed products in accordance with established procedures.
  
• Maintains a clean and orderly work environment.
  
• Checks materials and finished products to ensure compliance with standards.
  
• Performs duties consistent with established safety and quality procedures, rules, and standards.
  
• Performs other duties as assigned.
  

• 
  
• Basic mathematical computations required to complete production records and to accurately use a tape measure.
  
• Ability to use and operate hand tools.
  
• Capable of standing on concrete surfaces for up to three hours without a break and twelve hours with breaks.
  
• Hand-eye coordination necessary for high volume repetitive assembly operation.
  
• Comprehend and follow written and oral instructions.
  
• Ability to stand on your feet for 10 hours day.
  
• Ability to life 50 pounds as need throughout your shift.
  
• Demonstrated hand-eye coordination necessary for high volume repetitive assembly operation.
  
• Ability to work shifts and hours mandated by management
  
• Pass a pre-employment drug screen and background check.