Electrical Assembler Job Description Jobs in Usa
2,547 positions found — Page 4
2026-03-13
Country:
United States of America
Location:
US-MN-BURNSVILLE-MEMS ~ 14300 Judicial Rd ~ MEMS BLDG
Position Role Type:
Unspecified
U.S. Citizen, U.S. Person, or Immigration Status Requirements:
Security Clearance Type:
Security Clearance Status:
Not Required
Mechanical Assembler I - 1st Shift
Benefits Start Day 1!
Joining Collins Aerospace isn't just about finding a job; it's about embarking on a journey to redefine the future of aerospace technology. The Mechanical Assembler performs routine and repetitive assembly operations and processes and provides mentorship to department staff members. This position requires use of a few simple hand tools. The Mechanical Assembler ensures that work is accomplished with high quality, in a timely fashion and is compliant with all company, city, state and federal regulations.
What You Will Do:
- Be responsible for quality product standards with no defects.
- Meet customer deadlines and expectations.
- Be responsible to comply with applicable elements of quality systems.
- Participate in cost reduction plans and continuous improvement plans/events, as required.
- Participate in audits.
- Acquire applicable skill/knowledge/certifications as required.
- Perform inspection of parts, does coating, labeling/boxing, and general preparation for shipment.
- Check parts for cracks, loose connections, faulty bonds, and faulty assembly.
- Record test results in testing log. Route products for rework or salvage of usable parts.
- Route reworked assemblies for testing. Clean completed assemblies. Assemble parts according to blueprint specifications.
- Test parts by connecting to test equipment setting controls, observing readings and actions of instrument checking for malfunctions.
- Set up and use equipment such as: Ragen Assembly, Component Lead Former, Drill Press, Denison Hydraulic Press, Component Lead tinning, and S.M.T. Re-flow.
- May fabricate instrument parts through crimping, staking, and cutting.
- Acquire applicable skill/knowledge/certifications as required.
- Once properly trained and/or certified- perform specific tasks including, but not limited to, welding, soldering, item test and inspection, filler, immersion testing.
- Maintain materials, equipment, and work area in a clean and orderly condition.
- Comply with all rules and regulations of Raytheon Technologies, including, but not limited to: Environmental Health and Safety,
- Complete assigned tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individual skills.
- Check work methods and results for conformance to standards and re-instruct as required.
- Report to lead or supervisor on work progress and updates including conditions surrounding failures to meet quality standards.
- Other duties as assigned.
Qualifications You Must Have:
- Typically requires a HS Diploma or GED.
- U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: We Prefer:
- Manufacturing experience is strongly preferred
- Career Readiness Certification (CRC) strongly preferred.
- The ability to interpret schematics and/or technical drawings.
- The ability to successfully complete training modules associated with job grade.
- The ability to follow assembly instruction.
- The ability to effectively work in an environment requiring repetitive job responsibilities.
- The ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- The ability to understand end uses of products being built.
- Strong written and verbal communication skills.
- Attention to detail to ensure safety and quality.
- Strong organizational skills and ability to multi-task.
- The ability to work in a team to support work capacity in a fast-paced environment.
- Intermediate computer skills in terms of typing, navigating screens and learning new software programs.
- Demonstrated analytical skills and problem-solving abilities.
- The ability to take direction from more experienced coworkers, leads and supervisors.
What We Offer:
1st shift schedule: Monday - Friday; 6:30am - 3:00pm
Some of our competitive benefits package includes:- Medical, dental, and vision insurance
- Three weeks of vacation for newly hired employees
- Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
- Employee Scholar Program, tuition reimbursement program
- Life insurance and disability coverage
- Optional coverages you can buy: Pet Insurance, Home and Auto, additional life insurance, accident insurance, critical illness insurance, group legal
- Ovia Health, fertility and family planning
- Employee Assistance Plan, including up to 5 free counseling sessions
- Incentives for a Healthy You
- Bright Horizons, back-up child / elder care and college coach resources
- Autism Benefit
- Doctor on Demand, virtual doctor visits
- Adoption Assistance
- Teladoc Medical Experts, second opinion program
- And more!
Learn More and Apply Now!
Collins Aerospace, a RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio and expertise to solve customers' toughest challenges and to meet the demands of a rapidly evolving global market.
Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today.
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world - and access to Collins sites when their work requires in-person meetings.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form - with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that's redefining aerospace, every day.
The starting rate of pay for this role is $20.00/hour; however RTX considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, location, education/training, and key skills.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.
Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.
This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.
RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.
RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
**Description:**
You will be an Assembler for the Camden Operations team. Lockheed Martin Missiles and Fire (MFC) is a recognized designer, developer and manufacturer of precision engagement aerospace and defense systems for the U.S. and allied militaries. MFC develops, manufactures, and supports advanced combat, missile, rocket, manned and unmanned systems for military customers that include the U.S. Army, Navy, Air Force, Marine Corps, NASA and dozens of foreign allies.
Lockheed Martin's Camden Operations facility is a manufacturing, final assembly, test and storage operation for MFC programs.
**What You Will Be Doing**
As an Assembler, you will be responsible for helping create missiles, rockets and launchers that will protect our nation from its adversaries. Your responsibilities will include:
- Performing a variety of tasks ranging from repetitive to non-repetitive production assembly operations on mechanical assemblies and subassemblies including running automated equipment as well as applying touch up paint.
- Work from diagrams and drawings following detailed planning, and use hand and/or power tools, jigs and saws.
- Conduct quality inspections on processing lines in accordance with quality specifications.
- Disassemble, modify, rework, reassemble and test experimental or prototype assemblies and subassemblies according to specifications and under simulated conditions
**Why Join Us**
We're looking for a detail-oriented and team-driven Assembler to join our Camden Operations team. As a key contributor to our defense systems, you'll have the opportunity to work on critical projects, develop your skills, and collaborate with a talented team. With a strong foundation in mechanical assembly and process flow, you'll be able to make a significant impact in this role. If you're passionate about working with your hands and contributing to the nation's defense, we encourage you to apply.
We are committed to supporting your work-life balance and overall well-being, offering flexible scheduling options Learn more about Lockheed Martin's comprehensive benefits package here.
**Further Information About This Opportunity:**
This position is in Camden. Discover more about our Camden, Arkansas location.
MUST BE A U.S. CITIZEN - This position is located at a facility that requires special access.
This full time position is eligible for Apprenticeship LMCO.
Want to learn more? Check out this testimonial video featuring some of our manufacturing team members: mfcprodopsICs
**Basic Qualifications:**
- High school diploma or GED equivalent.
- Must have the desire and/or ability to use hand tools (i.e. torque wrench, drills and inspection tools, riveting tools, screwdrivers, power screwdriver, ratchet wrench, nut runner, crimpers, cable tools and various other hand tools).
- Ability to read and interpret assembly drawings or instructions.
- This position will be located at a facility that requires special access and requires the selected candidate to be a US citizen.
- This job will require lifting of up to 30-50 pounds.
- Ability to work overtime including Fridays, Saturdays, and Sunday's, occasional holidays, or extended hours during the week when needed
**Desired Skills:**
- Operating automated equipment, understanding of mechanical assembly and process flow.
- Prior SAP Software experience is a plus (on the job training will be provided).
- Strong teaming ability and effective communication skills.
- Critical thinking and problem solving.
- Familiar with Microsoft Office products (Outlook) is a plus
**Clearance Level:** None
**Other Important Information You Should Know**
**Expression of Interest:** By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.
**Ability to Work Remotely:** Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.
**Work Schedules:** Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.
**Schedule for this Position:** 4x10 hour day, 3 days off per week
**Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.**
**The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.**
Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about.
As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories.
**Experience Level:** Hourly/Non-Exempt
**Business Unit:** MISSILES AND FIRE CONTROL
**Relocation Available:** No
**Career Area:** Manufacturing
**Type:** Full-Time
**Shift:** Third
L3Harris is the Trusted Disruptor in defense tech. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Job Title: Electronic Cable Assembler B
Job Code: 33653
Job Location: Norfolk, VA.
Schedule: 5/8- Employees work 8 hours per day, 5 days per week
Job Description:
L3Harris is seeking a cable assembler to join the MPES Services Norfolk team. The assembler will perform standardized or prescribed technical assignments, involving a sequence of related operations on submarine molded cable assemblies and components.
Essential Functions:
- Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
- Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
- Conducts a variety of tests using established methods.
- Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
- Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
- Other duties may be assigned to include overtime work to complete production requirements.
Qualifications:
- High School diploma and 4 years prior related experience.
- Demonstrated ability to read and interpret cable assembly drawings.
- Demonstrated ability to read and execute hydrostatic pressure tank procedures.
- Ability to obtain L3Harris certification to operate forklifts.
- Must be able to lift up to 35 pounds independently.
- Must be able to traverse ladders.
L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions.
L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .
The assembler will assemble aerospace sheet metal products by working at a bench and on the manufacturing floor.
Who are we?
Founded in 1849, Ducommun is the oldest company in California. Starting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed.
Today Ducommun is a global provider of innovative manufacturing solutions for customers in the aerospace, defense and industrial markets. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications.
Our Facility in Coxsackie, NY manufactureslarge, complex contoured structural components and assemblies for aerospace andother applications. Our integrated processes include stretch-forming,thermal-forming, chemical processing, precision fabrication, machining,finishing processes, and integration of components into subassemblies.
Why Ducommun?
- Excellent company culture - as recognized by Newsweek's Top 100 Most Loved Workplaces
- Opportunity for career growth
- Great benefits including paid vacation and sick time, 401K match, Employee Stock Purchase Program, annual bonus plan, and tuition reimbursement
Duties & Responsibilities
- Reads and understands drawings, specifications, and work instructions to determine dimensions and tolerances of a finished assembly, the sequence of operations, and set-up requirements.
- Positions parts by following blueprints, fixturing's, and operations sheets.
- Trims, fits, and fastens parts together with bolts, screws, rivets, and adhesives.
- Operates various hand tools, tooling fixtures, and machines such as belt sander, saw, grinder, riveting machine, drill press, and shear.
- Uses precision measuring instruments, including but not limited to calipers, indicators, and weight scales.
- Understands customer specifications as they relate to the operation being performed.
- Verifies conformance of finished work piece to customer requirements.
- Learns basic Lean Manufacturing principles.
- Follows 6-S guidelines.
- Follows all safety rules, including proper PPE requirements, while performing tasks.
- Responsible for the proper handling and management of hazardous waste generated in their work area.
- Performs basic BAAN transactions (clock in/clock out, labor reporting, dispatch list).
- Verifies the operation as specified in the traveler as it relates to the operation being performed (i.e. the proper material, thickness, process, etc.).
- Performs other duties as assigned.
Skills & Qualifications
- High school diploma or equivalent required.
- Strong mechanical aptitude required.
- Math Skills - decimals, percentages, fractions - geometry and trigonometry preferred.
- Ability to read and interpret blueprints and mylars.
- Ability to read and understand internal procedures, policies, and travelers.
- Understand and follow through on both verbal and written instructions.
- Team-oriented with a continuous improvement outlook.
- Computer Skills - able to learn new screens, reports, functions, software programs and internal ERP systems.
- Communicates courteously and professionally at all organizational levels.
- Specific vision abilities required, include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus.
- Frequently required to walk; use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms.
- Annual baseline hearing test is required.
- Occasionally required to sit, stoop, kneel, or crouch.
- Must be able to frequently lift and/or move up to 50pounds
This is a generic job posting for an Assembler. Depending on the candidate's skills, qualifications and experience, they will be hired into an entry (I) level, intermediate (II) level or expert (III) level job and pay scale.
Pay rate: $18.00 - $20.00/hour
Equal Opportunity EmployerVeterans/Disabled
171 Stacey Road
Coxsackie, New York, 12051
United States
Full-time onsite:
Because of the need for consistent, in-person collaboration and/or the requirement to perform all work onsite due to the nature of this particular role, it will be performed full- time on site. This means work will be conducted on location at a BAE Systems facility 100% of the time.
This will be a 1st Shift position for a 4/10 schedule Monday-Thursday.
Assemble electronic components, assemblies, subassemblies, kits and modules according to specific written instructions, wiring lists and diagrams, routing instructions and process sheets. Use appropriate tooling and machinery as provided. Verify and inspect products to ensure conformance with requirements and perform rework as needed.
Perform mechanical and electrical assembly operations in the build of electronic assemblies using standard measuring tools and techniques, following work order instructions, policies and procedures. Perform soldering and inspection when/if certified.
Cross-train in other assembly positions, participate and support continuous improvement activities, perform other duties and responsibilities as required.
Required Education, Experience, & Skills
- Requires a High School Diploma or GED
- Soldering experience
- Inspection experience
Preferred Education, Experience, & Skills
- Europlacer experience
- SMT Experience
- SMT Setup experience
- Conformal coat experience
- Assembly experience
Pay Information
Full-Time Salary Range: $38041 - $60865
Please note: This range is based on our market pay structures. However, individual salaries are determined by a variety of factors including, but not limited to: business considerations, local market conditions, and internal equity, as well as candidate qualifications, such as skills, education, and experience.
Employee Benefits: At BAE Systems, we support our employees in all aspects of their life, including their health and financial well-being. Regular employees scheduled to work 20+ hours per week are offered: health, dental, and vision insurance; health savings accounts; a 401(k) savings plan; disability coverage; and life and accident insurance. We also have an employee assistance program, a legal plan, and other perks including discounts on things like home, auto, and pet insurance. Our leave programs include paid time off, paid holidays, as well as other types of leave, including paid parental, military, bereavement, and any applicable federal and state sick leave. Employees may participate in the company recognition program to receive monetary or non-monetary recognition awards. Other incentives may be available based on position level and/or job specifics.
About BAE Systems Electronic Systems
BAE Systems, Inc. is the U.S. subsidiary of BAE Systems plc, an international defense, aerospace and security company which delivers a full range of products and services for air, land and naval forces, as well as advanced electronics, security, information technology solutions and customer support services. Improving the future and protecting lives is an ambitious mission, but it's what we do at BAE Systems. Working here means using your passion and ingenuity where it counts - defending national security with breakthrough technology, superior products, and intelligence solutions. As you develop the latest technology and defend national security, you will continually hone your skills on a team-making a big impact on a global scale. At BAE Systems, you'll find a rewarding career that truly makes a difference. Electronic Systems (ES) is the global innovator behind BAE Systems' game-changing defense and commercial electronics. Exploiting every electron, we push the limits of what is possible, giving our customers the edge and our employees opportunities to change the world. Our products and capabilities can be found everywhere - from the depths of the ocean to the far reaches of space. At our core are more than 14,000 highly talented Electronic Systems employees with the brightest minds in the industry, we make an impact - for our customers and the communities we serve.
This position will be posted for at least 5 calendar days. The posting will remain active until the position is filled, or a qualified pool of candidates is identified.
Job Description
At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities:
Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.
Use a tension meter to set cable tension according to specifications.
Conduct reaming and riveting as necessary to complete work assignments.
Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.
Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.
Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.
Locate work areas using drawings or paperwork that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.
Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.
Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.
Disassemble parts and deburr holes to prepare for fastener installation.
Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.
Install cable control pulleys and rig control cables according to drawings and specifications.
Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.
Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.
Physical Demands and Potential Hazards:
Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.
Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications:
Experience using hand tools and/or hand-held power tools
Experience working with safety and quality processes and procedures.
Basic Computer experience and competency.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.
Preferred Qualifications:
Experience reading and interpreting drawings, specifications,
material processes, schematic and diagrams
Attended a Boeing partnered manufacturing related high school or
Preferred community and technology college academic program
Typical Education & Experience:
High school graduate or GED preferred.
Relocation:
Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace:
Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement:
This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement:
This position is for a variety of shifts
Total Rewards & Pay Transparency:
At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Summary pay range: $24.32 – $53.30
Applications for this position will be accepted until Sept. 04, 2026
Language Requirements
English Preferred
Relocation
Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship
Employer will not sponsor applicants for employment visa status.
Shift
This position is for variable shift
Equal Opportunity Employer:
Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
Your mechanical aptitude and hands-on skills will drive efficiency and precision in a fast-paced factory environment.
This position offers an exciting opportunity to develop your manufacturing expertise while ensuring our products meet the highest standards of quality and safety.
If you thrive in a team-oriented setting and enjoy working with tools and machinery, this is the perfect role for you to grow your career in manufacturing! Duties Assemble components and sub-assemblies accurately using hand tools, power tools, and assembly line techniques Assemble compressed air and vacuum systems.
More physical requirements, Must be mechanically inclined Follow detailed work instructions and blueprints to ensure precise assembly of products Conduct quality checks throughout the assembly process to identify defects or inconsistencies Maintain a clean, organized workspace to promote safety and efficiency on the factory floor Collaborate with team members to meet production targets and improve workflow processes Assist in inventory management by stocking parts and supplies needed for assembly tasks Skills Proven experience working in a manufacturing facility or factory environment Mechanical knowledge with the ability to use hand tools, power tools, and assembly equipment effectively Familiarity with assembly line processes and manufacturing best practices Strong attention to detail and commitment to quality standards Ability to follow detailed instructions and work independently or as part of a team Physical stamina to stand, lift, bend, and perform repetitive tasks throughout shifts This role is designed for motivated individuals eager to contribute their skills in a vibrant production setting.
We value safety, precision, and teamwork—if you're ready to bring energy and dedication to our manufacturing process, we want to hear from you! Why wait? Apply now to get started.
PeopleFirst Staffing is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
These are temp-to-hire positions based upon job performance, attendance, punctuality, and job openings
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.
As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft.
Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans.
In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics.
Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation Position Responsibilities Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.
Locate work areas using drawings and electronic resources that specify airplane and section numbers.
Verify kitted parts against installation plans and bill of materials for accuracy and suitability.
Determine and obtain the correct fasteners from PCA/MMO control per specifications.
Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.
Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.
Install and rework interior parts and assemblies, including carpets, stowbins, and seats.
Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.
Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.
Disassemble parts, deburr holes, and prepare surfaces for fastener installation.
Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.
Install fasteners in the correct sequence using appropriate tools, adhering to specifications.
Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.
Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.
Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications 1 years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.
1 years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.
1 years of experience using hand and power tools Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.
Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.
Ability to use hazardous chemicals.
Preferred Qualifications: 1 years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay is based upon candidate experience and qualifications, as well as market and business considerations.
Pay : $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
15, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.
As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems.
Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems.
You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.
Obtain necessary engineering drawings for assigned jobs if not included with the order.
Initiate planning or engineering change requests for pre-planned jobs as required.
Set up assembly tools according to instructions and ensure correct locators for model configurations.
Hand fit parts using jigs and tools to ensure proper alignment and fit.
Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.
Deliver completed details to the appropriate work area for further processing.
Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.
Drill and ream holes in parts and assemblies according to drawing specifications.
Apply sealants, primers, and adhesives as required by work orders and specifications.
Handle and dispose of hazardous materials safely, following approved procedures.
Obtain the correct type and size of fasteners from the roto-bin per specifications.
Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.
Measure and cut tubing to close tolerances, and swage tubing as necessary.
Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R.
§ 120.15 is required.
“US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience working with powered hand tools 1 years of experience working with precision measuring tools Computer proficiency including Microsoft Office Suite 1 years of experience using basic math (e.g.
addition, subtraction, multiplication and division) 1 years of experience working with detailed work instructions or reading and interpreting blueprints and drawings Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Shift Work Statement : This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.
Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Apr.
30, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth.
Find your future with us.
Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.
Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components.
In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies.
Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies.
You will operate advanced material handling equipment to efficiently load and unload engines and struts.
Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence.
If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.
You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence.
If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.
Position Responsibilities: Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.
Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.
Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.
Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.
Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.
Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.
Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.
Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.
Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.
Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.
Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.
Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.
Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.
Maintain personal and tool certifications, ensuring compliance with safety and operational standards.
Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.
Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights ranging from 10-15 lbs.
to 15-35 lbs.
Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
Work in environments that may involve contact with metals, solvents, and coolants.
Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
Adapt to varying noise levels and atmospheric conditions.
Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.
This position is expected to be 100% onsite.
The selected candidate will be required to work onsite at one of the listed location options.
To meet U.S.
export control compliance requirements, a “U.S.
Person” as defined by 22 C.F.R.
§120.62 is required.
“U.S.
Person” includes U.S.
Citizen, U.S.
National, lawful permanent resident, refugee, or asylee.
Do you meet this requirement? Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool.
Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.
Basic Qualifications : 1 years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.
1 year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.
Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.
Ability to lift up to 35 pounds.
This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.
Proficiency in reading, writing, and speaking English Preferred Qualifications: 1 years of experience performing aircraft structural work or equivalate.
1 years of experience using high impact vibratory tools; such as bucking/riveting.
Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program Conflict of Interest: Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.
Typical Education & Experience: High school graduate or GED preferred.
Relocation: Relocation assistance is not a negotiable benefit for this position.
Candidates must live in the immediate area or relocate at their own expense.
Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.
Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.
Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.
Shift Work Statement : This position is for a variety of shifts Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.
Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.
The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.
The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.
Pay : $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.
Applications for this position will be accepted until Sept.
04, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position.
Visa Sponsorship Employer will not sponsor applicants for employment visa status.
Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer.
Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.
