Ehs Location Jobs Remote Jobs in Usa
213 positions found — Page 10
Date Posted:
2026-03-09Country:
United States of AmericaLocation:
US-AZ-TUCSON-M02 ~ 1151 E Hermans Rd ~ BLDG M02Position Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
The ability to obtain and maintain a U.S. government issued security clearance is required. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearanceSecurity Clearance Type:
DoD Clearance: SecretSecurity Clearance Status:
Active and existing security clearance required after day 1At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today’s mission and stay ahead of tomorrow’s threat. Our team solves tough, meaningful problems that create a safer, more secure world.
The Effector Analog & Power (EAP) Department is seeking an Engineering Lab Lead. This individual will collaborate closely with other Lab Leads, Engineering staff, and Technicians to ensure the Engineering Labs adhere to established company policies and provide hardware development support to program teams.
This position works closely with all levels of leadership in multiple organizations as well as managing lab utilization across various projects. As a member of the team, this position will lead day-to-day operation requirements in Engineering Labs, with a particular focus on safety, compliance, security, improvement, and program support. The Lab Lead owns the quality and performance of the EAP Department’s Engineering Labs.
What You Will Do
- Lab Operating Procedure (LOP) Management; provide direction for lab users on established policies.
- Management, coordination, and implementation of:
- Environmental Health and Safety standards
- Lab Operating Procedures
- Property tracking and calibration
- Personnel lab access lists and training matrices
- Take a proactive role in developing, understanding, and implementing common lab processes, tools, templates, and metrics.
- Oversee audit assessment preparation; Engineering Lab Objective Evaluation and Factory & Lab Assessment reviews; develop corrective action plans and assist in the development of long-range objectives.
- Safeguard classified/proprietary material, hardware, and documentation.
Qualifications You Must Have
- Requires a degree in Science, Technology, Engineer and Mathematics and a minimum of 5 years prior relevant experience
- A minimum of two (2) years of experience managing safety, compliance, and processes in an Engineering, or similar, environment.
Qualifications We Prefer
- A Bachelor of Science degree in Business Administration or STEM field.
- Experience with chemical handling, metrology, and property control requirements and processes.
- Possess strong organizational, coordination, planning, analytical, and problem-solving skills.
- Exemplary oral communication and interpersonal/human relations skills.
- Leadership behaviors and willingness to make decisions and embrace change.
- Experience developing solutions and maintaining audit readiness procedures and goals for an organization.
- Experience working directly with engineers, technicians, and leadership in an engineering lab environment in the areas of safety, security, compliance, and property management.
- Experience with EHS, NISPOM, and Foreign Object Elimination processes.
What We Offer
- Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Trust, Respect, Accountability, Collaboration, and Innovation.
- Work Schedule: 9/80 schedule (every other Friday off)
- Relocation Eligibility: This position is eligible for relocation
Learn More & Apply Now!
- Please consider the following role type definition as you apply for this role.
- Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
- This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: , AZ: ,-az-location
#LI-SP1
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
The salary range for this role is 86,800 USD - 165,200 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills.Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
Date Posted:
2025-12-11Country:
United States of AmericaLocation:
HOH12: Wheels & Brakes - Troy 101 Waco Street, Troy, OH, 45373 USAPosition Role Type:
OnsiteU.S. Citizen, U.S. Person, or Immigration Status Requirements:
U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.Security Clearance:
None/Not RequiredJoining Collins Aerospace isn’t just about finding a job; it’s about embarking on a journey to redefine the future of aerospace technology.
Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market.
Our Troy, OH site location has an immediate need for a Multicraft Technician. Safely performing maintenance, preventative maintenance, and repair work on complex machine tools and other plant equipment, as well as plant electrical infrastructure and equipment electrical systems in a fast-paced manufacturing environment.
2nd Shift: Monday - Friday 3P-11P
What You Will Do
Receive job assignments and special instructions from the supervisor.
Escalate issues such as unresolved repairs, safety concerns, and part availability.
Follow safety standards including electrical safety, Lock-Out/Tag-Out, confined space, and fall protection.
Perform diagnostic, troubleshooting, adjustment, repair, and preventive maintenance on electrical equipment up to 480V.
Troubleshoot and repair various equipment including robots, CNC machinery, paint systems, chemical processing lines, shotpeen machines, test equipment, and grinders.
Maintain facility areas in a functional and clean condition.
Update and report on preventive maintenance tasks, noting any issues or improvements needed.
Use test equipment to diagnose maintenance issues.
Build, fabricate, or modify equipment as needed, including welding.
Install and move machinery and equipment as directed.
Operate PIVs like forklifts, golf carts, scissor lifts, and boom lifts.
Report equipment problems to the supervisor and order necessary materials and parts.
Maintain a clean and safe work environment; clean up after completing tasks or shifts.
Notify the operator/area supervisor and maintenance supervisor upon completing assignments.
Attend training and meetings, and perform other duties as assigned.
Retrieve items from the tool crib and complete necessary forms.
Turn in removed parts as required.
Provide detailed updates on completed or in-process work to peers and supervisors.
Maintain and update equipment maintenance documentation.
Inspect tools and equipment before use to ensure safety.
Perform inspections and audits as directed.
Carry out general maintenance activities and other functions based on qualifications. You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test.
You will be required to read, understand, and follow written and verbal instructions, drawings (Electrical & Mechanical), equipment manuals, and other support documentation (process/technical).
You will be required to function well as part of a team or as an individual contributor while providing the required maintenance support to a 24/7 production schedule.
You will be required to perform quality work in a safe and efficient manor while communicating effectively to the operators, supervisors, engineers, etc. with a customer service mindset.
You will be required to perform mathematical calculations requiring addition, subtraction, multiplication or division and pass a pre-employment qualification test.
You will be required to pass a vision assessment once per year, including an initial normal color vision test prior to employment.
You will be required to perform substantial reaching and moving while standing, twisting; stooping; and be response to sounds associated to the work environment.
You will be required to lift to 25 lbs. unassisted, anything over 25 lbs. would be assisted.
You will be required to wear personal protective equipment as required.
You will be required to adhere to all EH&S roles and responsibilities as stated in manufacturing work instructions and EHS policies and procedures.
Qualifications You Must Have
Typically requires a HS Diploma or GED
Experience working with technical documents (including any of the following: routings, blueprints, Engineering process specifications, written work instructions.)
Experience in CNC machining, electrical circuits and controls, PLC logic, automation, rigging, fabrication, lubrication, mechanical components and systems, hydraulics, pneumatics, plumbing, and tooling.
Experience with CMMS to receive, complete, and document repairs/PMs/parts used as needed to ensure a complete equipment history and service records.
Experience, in a similar industrial environment that includes high voltage installation and troubleshooting, engineering, or related technical field.
Qualifications We Prefer
Ability to supply own tools or use company provided tools.
Ability to multi-task and respond to changing priorities.
Problem solving, troubleshooting, and decision-making skills.
What We Offer
Some of our competitive benefits package includes:
Medical, dental, and vision insurance
Paid time off after 121 days
Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option
Tuition reimbursement program
Student Loan Repayment Program
Life insurance and disability coverage
Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection
Birth, adoption, leave benefits
Ovia Health, fertility, and family planning
Adoption Assistance
Autism Benefit
Employee Assistance Plan, including up to 10 free counseling sessions
Healthy You Incentives, wellness rewards program
Doctor on Demand, virtual doctor visits
Bright Horizons, child and elder care services
Teladoc Medical Experts, second opinion program
And more!
Learn More & Apply Now!
Our Advanced Structures team leverages advanced materials and additive manufacturing to develop complex interior and exterior solutions. These solutions ensure structural integrity of the aircraft, help aircraft take off and land, stay trim in the air, move forward, carry cargo and conduct rescues. We delight our customers with superior products and best-in-class service. Our global team is committed to continuous improvement – we work hard to make our solutions lighter-weight, stronger and more technically advanced, so that plane travel can be safer, more affordable and more sustainable in the years to come. We are looking for the best and brightest to fly and land with us!
*Please ensure the role type (defined below) is appropriate for your needs before applying to this role.
Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other -- propel us all higher, again and again.
Apply now and be part of the team that’s redefining aerospace, every day.
As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.
Privacy Policy and Terms:
Click on this link to read the Policy and Terms
- 5:00 PM but will need to support offshifts as needed for sampling events Duration: 6 + months, possibility to extend contingent assignment Key Responsibilities: Ensure compliance with health, safety, and environmental regulations.
Conduct quantitative and qualitative monitoring of workplace conditions, including air sampling and biological monitoring, to assess worker exposure to various agents.
Proactively identify potential health hazards (e.g., chemical toxicity, airborne contaminants, biological agents, ergonomic stressors) through inspections and evaluations of laboratory and pilot plant environments.
Provide essential training and education to employees and management on hazards, safe work practices, and the proper use of safety equipment and controls.
Develop and implement effective control measures to eliminate or reduce hazards, including engineering controls (e.g., ventilation, containment), administrative controls, and the selection and use of appropriate personal protective equipment (PPE).
Prepare detailed reports of findings, assessments, and recommendations to management and regulatory agencies, ensuring accurate documentation for compliance and future reference.
Preferred Job Titles: Industrial Hygienist Core Essential Skill Sets: Certified Industrial Hygienist (CIH) Must have sampling experience, preferably pharmaceutical, but if not, some type of chemical industry.
Bachelors Degree Required Qualifications & Education: Bachelors or Masters degree in: Environmental Science Occupational Health & Safety Industrial Hygiene Public Health Certifications (optional but valuable): A Certified Industrial Hygienist (CIH) Relevant Experience: Hands-on EHS work in clinical or manufacturing environments.
Familiarity with GMP, GLP, and other regulatory frameworks.
Exposure to biological, chemical, or radiological safety protocols.
Industrial hygiene experience is a must
Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Set-Up Technician is responsible for using tools & overhead cranes to complete mold changes, rehangs, as well as pull molds for repairs and conversions. The Set-Up Techs will make follow all set-up procedures and make sure they leave the area neat, clean and organized. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.
Essential Functions
- Proper installation and watering of all molds on all presses.
- Housekeeping; including return of unused supplies and auxiliary equipment to appropriate locations.
- Removal of all parts from previous job(s).
- Proper tying up of water lines so that they do not rub/burst.
- Proper shutdown of machines, including using the correct purge compound
- Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
Other Functions
- Be active in presenting problems/potential problems to the Supervisor.
- Other duties as assigned.
Success in this role will require
- Working knowledge of mold set up.
- Ability to assist in training employees.
- Ability to communicate effectively with all support departments.
- Have a thorough understanding of the effects of water flow on the molds.
- Thorough knowledge of production procedures and work instructions.
- Thorough knowledge of the operation of all auxiliary equipment.
- Ability to read water maps, water tools, properly purge machines & operate forklifts
What You'll Bring
- High school diploma or equivalency, required.
- Mechanical aptitude and experience with hand tools required.
- Ability to read and understand diagrams.
- Demonstrated time management skills.
- Ability to follow detailed instructions.
- Strong communication and interpersonal skills.
- Basic computer skills.
- Excellent mechanical skills.
- Must be able to lift and push up to 75 lbs.
- Must be able to pull up to 120 lbs.
- Must be able to stand, walk, and work for up to 12-hour shifts.
- Regular attendance and the ability to work overtime / weekends as needed is a requirement of the job.
Rev. 6.17.2025
#LI-Onsite
#LI-KN1
By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.
HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Job Summary
Under the direction of the Lead Manufacturing Supervisor, the Set-Up Technician is responsible for using tools & overhead cranes to complete mold changes, rehangs, as well as pull molds for repairs and conversions. The Set-Up Techs will make follow all set-up procedures and make sure they leave the area neat, clean and organized. This will be achieved by maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.
Essential Functions
- Proper installation and watering of all molds on all presses.
- Housekeeping; including return of unused supplies and auxiliary equipment to appropriate locations.
- Removal of all parts from previous job(s).
- Proper tying up of water lines so that they do not rub/burst.
- Proper shutdown of machines, including using the correct purge compound
- Assist in maintaining HellermannTyton's certifications by supporting: Corporate policies, procedures, work instructions, and required documentation.
Other Functions
- Be active in presenting problems/potential problems to the Supervisor.
- Other duties as assigned.
Success in this role will require
- Working knowledge of mold set up.
- Ability to assist in training employees.
- Ability to communicate effectively with all support departments.
- Have a thorough understanding of the effects of water flow on the molds.
- Thorough knowledge of production procedures and work instructions.
- Thorough knowledge of the operation of all auxiliary equipment.
- Ability to read water maps, water tools, properly purge machines & operate forklifts
What You'll Bring
- High school diploma or equivalency, required.
- Mechanical aptitude and experience with hand tools required.
- Ability to read and understand diagrams.
- Demonstrated time management skills.
- Ability to follow detailed instructions.
- Strong communication and interpersonal skills.
- Basic computer skills.
- Excellent mechanical skills.
- Must be able to lift and push up to 75 lbs.
- Must be able to pull up to 120 lbs.
- Must be able to stand, walk, and work for up to 12-hour shifts.
- Regular attendance and the ability to work overtime / weekends as needed is a requirement of the job.
Rev. 6.17.2025
#LI-KN1
#LI-Onsite
By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.
HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.
Job Summary
Under the direction of the Director of Automation, the Automation Continuous Improvement Engineer is responsible for analyzing, developing, supporting, and documenting the ongoing continuous improvement projects within the Automation Engineering department to increase the efficiency, operation and readiness of the plants automation equipment. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.
The CI Engineer will use Six Sigma tools to analyze and support recommendations for machine improvements and cost saving projects. "
Essential Functions:
- Provide analytical data and documentation to support machine improvements that will lead to improved machine efficiencies.
- Collaborate and review suggested design improvements with Automation Engineer Design Team
- Ensure conformance to engineering codes, IATF16949 and HellermannTyton standards for quality
- Use CAD/SolidWorks software to create/modify and update drawing within the EPDM vault
- Use AB software to create/modify and update machine Programmable Logic Control programs as required.
- Modify and update CAD/SolidWorks files in accordance to standard processes in place in the department.
- Possess advanced skills with vision systems and integration for quality inspections.
- Build and develop strong working relationships with cross-functional teams to work towards common goals and projects outcomes defined by Operations plant management team.
- Participate in project hand off processes that require process optimization, process flow, and assisting with training as required.
- Evaluate high scrap machines/cells using problem solving techniques that could include analysis of material, tooling, process or equipment and prepare data to support recommendations/findings.
- Lead cross-functional teams to successful project completion outcomes, as directed by the Director of Automation and Operations management team.
- Recommend and implement measures to improve equipment performance, quality and production methods.
- Stay current with technology and industry standards
- Comply with all quality and safety regulations in compliance with OSHA and HellermannTyton policy
Other Functions
- Travel could be required on a "as needed" basis
- Attend all meeting with cross-functional teams to review project work and direction
- Lend support through training and technical advice to help other technicians become more efficient.
- All employees entering the manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) as a condition of employment.
Success in this role will require
- Use of SolidWorks/Cad System
- Use of AB Programmable Logic Control software as required
- Six Sigma methodologies and practices
- Project management skills and creating documentation
- Ensure conformance to ASME codes as required
- Follow all IATF16949 and company standards for quality and manufacturability
- Manage and leverage resources to complete projects on time and within budget
- Vision System Integration and control
- Ability to define problems, collect data, establish facts and draw valid conclusions to recommend improvements.
- Ability to effectively present information and respond to questions from groups, managers and fellow team members.
- Experience in communicating with suppliers and vendors
- Basic to advanced skills in pneumatic systems
- Advanced Programmable Logic Control knowledge
What You'll Bring
- Bachelor of Science (B.S.) or equivalent from a four year college or technical school with 3+ years experience in Automation Design/Integration and Continuous Improvement projects involving automation.
- Ability to read and interpret documents such as technical specifications, schematics, and ladder logic
- Certified Six Sigma Green Belt is preferred
- Ability for overnight travel by air or land as needed.
- Must have a valid drivers license, with an acceptable driving record, along with adequate insurance
Rev. 9.21.2021
This role ensures adherence to contamination control practices, SOP/GMP compliance, accurate batch documentation, and safe handling of cloth, film, and solution contact components.
Operators serve on the front line of aseptic behavior, environmental discipline, and product integrity, supporting compliant and efficient manufacturing operations.
Job Description AVAILABLE SHIFTS: 1st Shift: Mon-Fri 6am-2:30pm 2nd Shift: Mon-Fri 2pm-10:30pm 3rd Shift: Mon-Fri 10pm-6:30am MAJOR RESPONSIBILITIES Cleanroom Conduct & Gowning Follow all cleanroom gowning requirements and adhere to gowning and material entry protocols.
Follow good aseptic practices when performing all tasks within ISO-certified environments.
Pre-Run Preparation Complete all pre-run checks, including: Line clearance procedures Verifying production parameter sheets and counter readings Checking machine cleanliness status Accurate documentation Cloth Converting Operations Load cloth rolls using approved cleanable dollies or carts, minimizing manual handling.
Set up and operate unwind stations, tension controls, alignment systems, folding boards, and cutting mechanisms according to validated line parameters.
Monitor dosing application (when applicable), including flow rate, nozzle alignment, and solution coverage.
Continuously inspect the web path for defects (tears, fraying, or contamination) and adjust as needed.
Perform required hourly inspections and document results.
OR Packaging Line Operations Load film rolls using approved cleanable carts or lifts, minimizing manual handling.
Set up and maintain packaging parameters within validated specifications.
Set up and verify date/lot coding equipment and inspection verification systems.
Perform required hourly inspections and document results.
Documentation & Escalation Real-time, accurate, and complete documentation on all forms and records.
Follows Good Documentation Practices Immediately escalate deviations to the Supervisor or Quality.
Cleaning & Responsibilities Perform cleaning activities according to established procedures.
Assist with sanitization steps for all tools/equipment and execute proper changeover cleaning sequences.
Handle scrap per established procedure and ensure scrap receptacles never leave the cleanroom.
Safety & Ergonomics Follow all EHS procedures, including chemical handling requirements.
Use proper ergonomic techniques when lifting cloth rolls and moving materials.
MINIMUM JOB REQUIREMENTS Education High school diploma or GED required Work Experience Experience in aseptic manufacturing environment Knowledge / Skills / Abilities Effective communication and interpersonal skills, including the ability to guide and collaborate with others.
Comfortable working in cleanroom and controlled environments while adhering to gowning, safety, and quality requirements.
Other duties as assigned.
Flexibility to work mandatory overtime based on business needs.
Ability to speak, read, and write English with proficiency PREFERRED JOB REQUIREMENTS Work Experience Hands-on experience in GMP-regulated pharmaceutical or biopharmaceutical manufacturing.
Knowledge / Skills / Abilities Strong working knowledge of GMP regulations, aseptic techniques, and biopharmaceutical manufacturing processes, with the ability to execute work in compliance with SOPs, batch records, and technical documentation.
Proven ability to operate, monitor, troubleshoot, and maintain biopharmaceutical manufacturing equipment.
Demonstrated attention to detail with the ability to accurately complete GMP documentation and support investigations and escalate issues.
Effective communication and interpersonal skills, including the ability to guide and collaborate with others.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $21.75
- $31.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Operators serve on the front line of aseptic behavior, environmental discipline, and product integrity, supporting compliant and efficient manufacturing operations.
Job Description AVAILABLE SHIFTS: 1st Shift: Mon-Fri 6am-2:30pm 2nd Shift: Mon-Fri 2pm-10:30pm 3rd Shift: Mon-Fri 10pm-6:30am MAJOR RESPONSIBILITIES Cleanroom Conduct & Gowning Follow all cleanroom gowning requirements and adhere to gowning and material entry‑ protocols.
Follow good aseptic practices when performing all tasks within ISO-certified environments.
Pre-Run Preparation Complete all pre-run checks, including: Reconciliation of materials.
Verifying process piping cleaning requirements for the upcoming batch.
Confirming availability of cloth rolls, film, solution, and other materials.
Material Staging Stage cloth rolls, film, and other packaging materials per established procedures to minimize contamination risk.
Maintain unidirectional flow of cloth, film, totes, and packaging components to prevent cross contamination.
Manage raw materials to ensure expired or incorrect lots are not used.
CIP/COP Processes Perform all cleaning activities related to process piping and components according to established procedures.
Execute sanitization cleaning cycles for all raw materials entering cleanroom environments.
Perform sanitization steps for all tools/equipment and execute proper changeover cleaning sequences.
Documentation & Escalation Real-time, accurate, and complete documentation on all forms and records.
Follows Good Documentation Practices Immediately escalate deviations to the Supervisor or Quality.
Cleaning & Responsibilities Perform cleaning activities according to established procedures.
Handle scrap per established procedure and ensure dedicated scrap receptacles never leave the cleanroom.
Safety & Ergonomics Follow all EHS procedures, including chemical handling requirements.
Use proper ergonomic techniques when lifting and moving materials.
MINIMUM JOB REQUIREMENTS Education High school diploma or GED required Work Experience Prior manufacturing experience.
Knowledge / Skills / Abilities Must be able to lift up to 50 lbs.
Must be able to bend, twist, reach, push, lift for extended periods daily.
Comfortable working in cleanroom and controlled environments while adhering to gowning, safety, and quality requirements.
Other duties as assigned.
Flexibility to work mandatory overtime based on business needs.
Ability to speak, read, and write English with proficiency PREFERRED JOB REQUIREMENTS Work Experience Experience in aseptic manufacturing experience in GMP and ISO-cleanroom environments.
Knowledge / Skills / Abilities Strong working knowledge of GMP regulations, aseptic techniques, and biopharmaceutical manufacturing processes, with the ability to execute work in compliance with SOPs, batch records, and technical documentation.
Proven ability to operate, monitor, troubleshoot, and maintain biopharmaceutical manufacturing equipment.
Demonstrated attention to detail with the ability to accurately complete GMP documentation and support investigations and escalate issues.
Effective communication and interpersonal skills, including the ability to guide and collaborate with others.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $20.25
- $29.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
- 2nd Shift Location: West Des Moines, IA 50265 Job ID: #72227 Pay Range: $16-20 Shift: 1st shift, M
- F 7:00am
- 3:30pm, some mandatory & voluntary over time on SATs ON-SITE work only Open to US Citizens & US Permanent Residents Entry-Level will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing doing Assembly, Machine Operations, Inspection or Calibration THE COMPANY
- Work with one of the Largest American Owned Aerospace & Defense Companies.
Entrylevel will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing as an Assembler, Machine Operator, Inspector or Calibration Tech.
Manufacturing Technician (ONSITE): Operates production equipment.
Constructs, maintains, and test mechanical systems and components/assemblies.
Candidate would have manufacturing and/ or small hand tools experience preferably.
Job Details:
* Follows blueprints, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met.
* Performs troubleshooting, calibrations or modifications of hardware, fixtures and software.
* Uses measuring and diagnostic tools to test and modify systems and components/assemblies.
* Maintains records of production and reports any issues while following standard procedures.
* Interprets data and accurately records time changes, test data, parts usage, etc.
* Uses mechanical or Optical equipment, including computers use and lasers use.
* Provides technical solutions to engineering.
* Ensures systems and components/assemblies meet established specifications.
* Reworks and repairs various mechanical and electromechanical systems and components/assemblies as needed.
* May assist engineering with the design of components and prototypes.
* May train and mentor new technicians.
* Exhibits Company's Leadership Behaviors and Values.
* Supports and follows all rules/guidelines/standards set by EHS, Quality and CI functions as set by assigned leader and position.
* Perform other duties as assigned including working extended shifts/overtime as required by the business.
* May be trained/certified in multiple skills.
* Entry Level will Train OJT On-the -Job
- Preferring previous experience in Production or Manufacturing as an Assembler, Machine Operator, Inspector or Calibration Tech.
* US Citizen and US Person candidates permitted Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law.
Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices.
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
**This role can be based out of our Corporate office in Northbrook, IL or Remote with up to 75% travel to Distribution Centers throughout several states in the Northeastern portion of the US
** Under the strategic direction of Corporate Human Resources, the Director, HR aligns divisional HR practices with overall Corporate direction.
This individual partners with Field Operations business leaders to develop the Northeast Region's human resource strategy and tactics so that the organization attracts, manages, develops and retains the employees it needs to achieve its current business objectives.
The HRD anticipates and plans for long-term HR needs and trends, and leads Human Resources practices and objectives that will provide an employee-oriented, high performance culture that emphasizes quality, productivity, and standards, goal attainment, and the recruitment and ongoing development of a superior workforce.
In addition, the Director provides feedback and initiates recommended actions and approaches related to HR issues to Corporate HR for broader consideration and policy formulation.
The Director also ensures the HR operation is operating in accordance with federal, state, and local employment requirements, e.g., Fair Labor Standards Act (FLSA), Title VII, etc.
This role reports to the Vice President, Human Resources.
Job Description MAIN RESPONSIBILITIES Lead HR programs and policies through partnering with business leaders while managing the tactical implementation through HR managers.
Develop processes and metrics that support the achievement of the organization's business goals.
Counsel and assist business leaders to maintain, identify and implement actions that improve or maintain a positive employee relations environment.
Identify any internal and external factors that may affect employee retention; address these issues by working in concert with managers/supervisors to develop proactive strategies to meet or exceed turnover goals.
Develop action plans to respond to current and anticipated staffing issues and needs.
Develop and maintain division affirmative action program; oversee filing EEO-1 annually; maintaining other records, reporting and logs to conform to EEO regulations.
Identify training and development initiatives and work with Corporate Training and Development to determine training needs.
Compile data and analyze past and current training requirements.
Partner with Corporate Training and Development Dept to select appropriate instructional procedures or methods to best fit division needs.
Develop and mentor key division staff through on-boarding, open communication, training and development opportunities and performance management processes; build and maintain employee morale and motivation; ensure the team is appropriately staffed with required competencies.
Assist division management with establishing and maintaining internal pay consistency and equity.
Oversee the administration of Corporate compensation programs including incentive and merit pay programs within the division.
Oversee and manage Company's EHS programs and policies.
Assist managers with current Worker’s Compensation issues.
Work closely with HR/Workers Compensation Analyst to assist with current issues with policies and procedures.
Management responsibilities may include: Day-to-day operations of a group of employees.
May have limited budgetary responsibility and usually contributes to budgetary impact; Interpret and execute policies for departments/projects and develops.
Recommend and implement new policies or modifications to existing policies.
Provide general guidelines and parameters for staff functioning.
Hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.
MINIMUM QUALIFICATIONS: Education Bachelor’s degree.
Relevant Work Experience At least 8 years of progressive experience in various Human Resources positions.
At least 3 years of experience managing people, including hiring, developing, motivating and directing people as they work.
Additional Experience applying knowledge of human resource policies and procedures as well as federal and state laws.
Experience reviewing and reconnecting on actions and with people to ensure the completion of the task.
Experience controlling and coordinating concurrent projects, competing priorities and critical deadlines.
Experience developing and delivering presentations to various audience levels within an organization.
Position requires travel up to 75% of the time for business purposes (within state and out of state).
PREFERRED QUALIFICATIONS: PHR or SPHR.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $154,000.00
- $231,000.00 Annual The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
This role is bonus and/or incentive eligible.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
