E Discovery Tools Examples Jobs in Usa

Title: Tooling Engineer

Reports to: Tooling Manager

Department: Tooling Engineering

Job Summary:

Under the direction of the Tooling Manager, the Tooling Engineer is responsible for assisting the Tooling Engineering Department in directing the manufacture of quality injection molding tools. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

Essential Functions:

• 
  
  
• Writing purchase orders stating mold building specifications.
  
  
• Writing requests for quotations for vendors.
  
  
• Assure that vendors keep within budget and timing constraints on projects.
  
  
• Evaluate and Approve injection molding tool design.
  
  
• Assure that vendors incorporate the approved design in injection molding tool construction.
  
  
• Keep a library of tool drawings.
  
  
• Travel to vendors to evaluate progress in injection molding tool construction. Travel to vendors to evaluate completed injection molding tool performance and product conformity.
  
  
• Evaluate product design as to moldability and simplification for moldability.
  
  
• Assist in troubleshooting injection molding problems.
  
  
• Work with injection molding tool designs to assure the highest quality molding tools possible.
  
  
• Work with toolmakers to assure the highest quality injection molding tools possible.
  
  

Other duties assigned:

• 
  
  
• Other duties as assigned.
  
  

Qualifications:

• 
  
  
• High school diploma or equivalent.
  
  
• Associate degree or in lieu of degree, three or more years of prior on-the-job experience. A good mechanical ability.
  
  
• Prior experience with plastic injection molding process.
  
  
• Knowledge of injection molding tools and injection molding tool construction.
  
  
• Knowledge of machine tools and how machine tools relate to injection mold tool construction.
  
  
• Knowledge of manufacturing best practices.
  
  
• Excellent computer skills, including Microsoft software and CAD software.
  
  
• Organized; can meet deadlines.
  
  
• Ability to work non-standard hours to meet the needs of the customers.
  
  
• Ability to travel internationally.
  
  
• Must have a valid driver's license with an acceptable driving record, along with adequate automobile insurance.
  
  

#LI-KN1 #LI-Hybrid

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Join us and be a part of something truly special. You will work in a state-of-the-art Tool Room with a group of progressive Tool Makers.
Apply now to join our team at HellermannTyton!

What You Will Do:

The Toolmaker/Moldmaker is responsible for working with the lead mold maker to build new tooling per CAD or detailed prints, evaluate, maintain, and repair existing molds and production tooling. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions and required documentation.

• 
  
  
• Must be able to build new tooling and components with minimum supervision
  
  
• Identify and communicate any possible tooling problems to the lead mold maker or supervisor
  
  
• Must be able to work well with lead mold makers and train mold maintenance technicians and apprentices
  
  
• Must be able to operate all tool room equipment
  
  
• Must be able to perform mold maintenance and in-press mold changes
  
  
• Must be willing to work overtime based on production needs
  
  

Other Functions

• 
  
  
• Work with QA to identify quality concerns
  
  
• Maintain a clean and safe work area
  
  
• Performs other tasks as assigned
  
  
• Required Personal Protective Equipment: safety shoes are to be worn at all times during your scheduled work hours.
  
  

What You Bring (Qualifications):

What You Will Do:

The Toolmaker/Moldmaker is responsible for working with the lead mold maker to build new tooling per CAD or detailed prints, evaluate, maintain, and repair existing molds and production tooling.

• 
  
  
• Must be able to build new tooling and components with minimum supervision
  
  
• Identify and communicate any possible tooling problems to the lead mold maker or supervisor
  
  
• Must be able to work well with lead mold makers and train mold maintenance technicians and apprentices
  
  
• Must be able to operate all tool room equipment
  
  
• Must be able to perform mold maintenance and in-press mold changes
  
  
• Must be willing to work overtime based on production needs
  
  

Other Functions

• 
  
  
• Work with QA to identify quality concerns
  
  
• Maintain a clean and safe work area
  
  
• Performs other tasks as assigned
  
  
• Required Personal Protective Equipment: safety shoes are to be worn at all times during your scheduled work hours.
  
  

What You Bring (Qualifications):

• 
  
  
• 3+ years of plastic injection molding building experience or successful completion of an apprenticeship program.
  
  
• Journeyman Tool & Die Maker certification/degree is preferred.
  
  
• High School diploma or equivalent required
  
  
• Knowledgeable in current mold-building techniques. This individual should have solid manufacturing concepts in plastic injection mold building
  
  
• Ability to read, interpret, and analyze engineering designs and computer-based CAD plans and models.
  
  
• Must possess good written and verbal communication skills
  
  
• Must have good problem-solving skills and be detail-oriented
  
  
• Ability to lift/push/pull up to 50 lbs.
  
  
• Must have own precision tools
  
  
• Prior forklift experience preferred
  
  

Why USAA?

At USAA, our mission is to empower our members to achieve financial security through highly competitive products, exceptional service and trusted advice. We seek to be the #1 choice for the military community and their families.

Embrace a fulfilling career at USAA, where our core values – honesty, integrity, loyalty and service – define how we treat each other and our members. Be part of what truly makes us special and impactful.

The Opportunity

As a dedicated Property Adjuster Specialist , you will work within established guidelines and framework to investigate, evaluate, negotiate, and settle complex property insurance claims presented by or against our members. You will confirm and analyzes coverage, recognize liability exposure and negotiate equitable settlements in compliance with all state regulatory requirements.

Property Adjuster Specialist focus on using technology and desk adjusting for a virtual first approach to inspections and claims handling. USAA also provides a company vehicle to physically inspect losses within your locally assigned territory. Field Adjusters may travel outside of their local territory to respond to claims in other regions when needed. This is an hourly, non-exempt position with paid overtime available.

This is a field-based role for the area of Jacksonville, NC. Candidates currently living in this location or willing to self-relocate are encouraged to apply.

• Proactively manages assigned claims caseload comprised of complex damages that require commensurate knowledge and understanding of claims coverage including potential legal liability.

• Partners with vendors and internal business partners to facilitate complex claims resolution. May also involve external regulatory coordination to ensure appropriate documentation and compliance.

• Investigates claim damages by conducting research from various sources, including the insured, third parties, and external resources. May identify and resolve potential discrepancies and identifies subrogation potential resulting from unusual characteristics.

• Identifies coverage concerns, reviews prior loss history, determines and creates Special Investigation Unit (SIU) referrals, when appropriate. Determines coverage through analyzing information involving complex policy terms and contingencies.

• Determines and negotiates complex claims settlement within authority limits. Develops recommendations and collaborates with management for determining settlement amounts outside of authority limits and accurately manages claims outcomes.

• Maintains accurate, thorough, and current claim file documentation throughout the claims process.

• Advance knowledge of estimating technology platforms and virtual inspection tools. Utilizes platforms and tools to prepare claims estimates to manage complex property insurance claims.

• Supports workload surges and catastrophe (CAT) response operations as needed, including mandatory on-call dates and potential evening, weekend, and/or holiday work outside normal work hours.

• May be assigned CAT deployment travel with minimal notice during designated CATs.

• Works various types of claims, including ones of higher complexity, and may be assigned additional work outside normal duties as needed.

• Works independently solving complex problems with minimal guidance; acts as a resource for colleagues with less experience.

• Adjusts complex claims with attorney involvement.

• Recognizes and addresses jurisdictional challenges such as applicable legislation and construction considerations.

• May require travel to resolve claims, attend training, and conduct in-person inspections.

• Ensures risks associated with business activities are effectively identified, measured, monitored, and controlled in accordance with risk and compliance policies and procedures.

• High School Diploma or General Equivalency Diploma required.

• 2 years of relevant property claims adjusting experience of moderate complexity losses that includes writing estimates, involving dwelling and structural damages.

• Advanced knowledge of estimating losses using Xactimate or similar tools and platforms.

• Proficient knowledge of residential construction.

• Proficient knowledge of property claims contracts and interpretation of case law and state laws and regulations.

• Proficient negotiation, investigation, communication, and conflict resolution skills.

• Proven investigatory, analytical, prioritizing, multi-tasking, and problem-solving skills.

• Ability to travel 50-75% of the year (local & non-local) and/or work catastrophe duty when needed.

• Acquisition and maintenance of insurance adjuster license within 90 days and 3 attempts.

• US military experience through military service or a military spouse/domestic partner

• 5 years of prior carrier field experience handling higher severity/complex losses (i.e. vandalism, malicious mischief, foreclosures, earth movement, collapse, liability, etc.)

• Prior experience adjusting property claims using virtual technologies

• Prior property field adjuster experience handling DWG, APS and ALE adjustments

• Industry designations such as AINS, CPCU, AIC, SCLA (or actively pursuing)

• Xactimate Level 1 and/or Level 2 certification

• Prior deployments in support of catastrophes

• Currently hold an active Adjuster License

• Currently reside within or have the ability to self-relocate to Jacksonville, NC

• May require the ability to crouch and stoop to inspect confined spaces, to include attics and go beneath homes into crawl spaces.

• May need to meet all USAA safe driving requirements including verification of driving record through MVR & possession of valid driver’s license.

• May require the ability to lift a minimum of 35 pounds to include lifting a ladder in and out of the trunk of a car.

• May require the ability to climb ladders and traverse roofs, this includes the ability to work at heights while inspecting roofs and attics.

Compensation range: The salary range for this position is: $69,920.00 - $133,620.00.

USAA does not provide visa sponsorship for this role. Please do not apply for this role if at any time (now or in the future) you will need immigration support (i.e., H-1B, TN, STEM OPT Training Plans, etc.).

Compensation: USAA has an effective process for assessing market data and establishing ranges to ensure we remain competitive. You are paid within the salary range based on your experience and market data of the position. The actual salary for this role may vary by location.

Employees may be eligible for pay incentives based on overall corporate and individual performance and at the discretion of the USAA Board of Directors.

The above description reflects the details considered necessary to describe the principal functions of the job and should not be construed as a detailed description of all the work requirements that may be performed in the job.

Benefits: At USAA our employees enjoy best-in-class benefits to support their physical, financial, and emotional wellness. These benefits include comprehensive medical, dental and vision plans, 401(k), pension, life insurance, parental benefits, adoption assistance, paid time off program with paid holidays plus 16 paid volunteer hours, and various wellness programs. Additionally, our career path planning and continuing education assists employees with their professional goals.

For more details on our outstanding benefits, visit our benefits page on

Applications for this position are accepted on an ongoing basis, this posting will remain open until the position is filled. Thus, interested candidates are encouraged to apply the same day they view this posting.

USAA is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Expected to perform all the activities on the Factory Service Center Shipping & Receiving Team. Receives and ships all customer tools into and out of the Factory Service Center. Receives all customer returns and accurately enters customer and product information into various business platforms including JDEdwards, 360 Insight, or any other required business platform. Moves material to different locations in the building(s), utilizing various forms of material handling equipment including forklifts, hand trucks, two-wheel dollies or transfer truck. Evaluates customer returns for warranty, credit or repair as determined by company and department policies. Receives and ships all customer tools into and out of the Factory Service Center.

In This Role, Your Responsibilities Will Be:

* Receive tools sent to the factory service center from customers requesting a tool repair evaluation.

* Receive tools sent to the stock returns area from distributors requesting a credit.

* Receive parts shipments from DCs and suppliers, and all misc. packages that are sent to the factory service center. Put away parts into correct inventory locations.

* Package/box, label, and ship tools to customers and distributors accurately.

* Process/record all transactions in JDE, 360 Insight.

* Help walk-in customers with tool receipts and basic questions about the repair process.

* Identify the specific tool model on incoming receipts using variety of factors like serial number, product catalog, and general knowledge of product line.

* Evaluate condition of packaging and tool returned for stock credit. Make determination on whether the distributor should be given credit using a variety of factors such as condition of tool, serial number, sales order number, purchase order number. Determine whether the tool can be salvaged through repair or if the tool should be scrapped.

* Must have a good working or developing understanding of the entire product line.

* Good understanding of the various packaging sizes and understand limits of when the standard package can be substituted for another size.

* Supports receiving team at service desk counter, and interacts with customers in taking orders and providing feedback on the lead time in person.

* Receives tools for repair and customer returns at the standard daily and weekly pace set by the service center supervisor and management, without needing significant help from others.

* Information about tool received for repair that is entered into 360 with errors is relatively low and occurs within an acceptable amount of tolerance for the amount of training and experience with the product line.

* Parts and tools are put away into the correct inventory locations and errors are relatively low..

Who You Are:

* You stay aligned with your goals and stay productive. You prepare content for communication that is impactful. You build the customer relationships. You find ways to manage stress and pressure. You define issues and can map out a process.

For This Role, You Will Need:

* 1 year manufacturing or warehouse experience

* 1 year troubleshooting experience.

* Ability to interface with customers in person or via email communications.

* Ability to obtain a forklift license.

* Good oral and written communication skills.

* Working knowledge of computer applications.

* Legal authorization to work in the United States - Sponsorship will not be provided for this position.

Preferred Qualifications That Set You Apart:

* 3 years manufacturing experience, preferably in shipping/receiving/warehousing.

* 1-3 years customer facing experience.

* Forklift License

Our Culture & Commitment to You:

The salary range for this role is $45,700 - 53,000 annually, commensurate with the skills, talent, capabilities, and experience each candidate brings to a role.

At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results.

We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

Learn more about our Culture & Values.

LI-BS

TOOLMAKER III

BENEFITS

• 15% Shift Premium - 2ND SHIFT ONLY
• Medical & Vision Insurance
• Supplemental Insurance Plans Available
• Dental Insurance (Company paid)
• STD and Life & AD&D Insurance (Company paid)
• 401(K) Matching
• PTO & Unpaid Excused Absences
• Uniforms (Company paid)
• Training & Apprenticeship Opportunities
• Safety Shoe & Glasses Reimbursement Program
• Gym Membership Reimbursement Program

JOB SUMMARY

As a Toolmaker III, you play a critical role in developing and optimizing advanced tooling solutions for manufacturing processes. Leveraging your extensive experience and expertise as a toolmaker, you are responsible for designing, fabricating, manufacturing, and maintaining complex tools, dies, molds, and fixtures. Your role involves collaborating with cross-functional teams, providing technical guidance, and leading projects to drive process improvements and efficiency gains.

ESSENTIAL DUTIES AND RESPONSIBILITIES

• Interprets complex engineering drawings, blueprints, and specifications to identify tooling requirements and constraints.
• Utilizes advanced computer-aided design (CAD) software to help create intricate 2D and 3D models of tooling components, ensuring optimal design and manufacturability.
• Directs the Toolmaker Is and IIs on daily tasks.
• Operates various precision machine tools, including CNC machines, EDM machines, grinders, and lathes, to fabricate and modify complex tooling components.
• Conducts thorough inspections and dimensional checks using advanced metrology equipment to ensure the accuracy and quality of finished tooling components.
• Assembles, fits, and tests intricate tooling components, verifying functionality, performance, and conformance to specifications.
• Leads cross-functional teams in developing and optimizing tooling designs, collaborating with engineers, production personnel, and quality assurance teams to drive innovation and efficiency.
• Troubleshoots and resolves complex tooling-related issues, utilizing root cause analysis and implementing corrective actions to improve performance and reliability.
• Develops and implements preventative maintenance programs to ensure tooling assets' longevity and optimal performance.
• Generates comprehensive documentation, including design records, modification logs, and maintenance reports, to maintain accurate records and facilitate knowledge transfer.
• Provides technical guidance and mentorship to Toolmaker Is and IIs, fostering a culture of continuous learning and skill development.

The above list reflects the general details necessary to describe the principle and essential functions of the position. It shall not be construed as the only duties that may be assigned for the position. An individual in this position must successfully perform the essential duties and responsibilities listed above. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this position.

MINIMUM QUALIFICATIONS

• Strong attention to detail, organization, and leadership skills.
• Ability to follow written and verbal directions.
• Strong teamwork skills.
• 5+ years of experience working with molds and dies.
• 5+ years of experience working as a Toolmaker.
• Working knowledge of safety protocols.
• Ability to use shop mathematics, working with drawings, specifications, and formulas in tooling.
• Ability to pass Company-provided Overhead Crane and Forklift Operating Certifications.
• Proficient at using floor equipment such as grinders, mills, lathes, etc.
• Must possess own toolbox and tools for the position.
• Experience with CAD software.
• Ability to work with equipment used for making hydraulic lines and water circuits.
• Proficient in timing and fitting of die components.
• Ability to remain at or under budget on projects.
• Proficient knowledge of various steel grades, heat treat specifications, and coatings/texturings.

PREFERRED QUALIFICATIONS

• 10+ years of experience working with molds and dies.
• High school degree or equivalent.
• A Journeymans Tool & Die Makers Accredited Apprenticeship or two years of technical college training in the tool & die field.

PHYSICAL AND MENTAL DEMANDS

An employee must meet the physical and mental demands described here to perform the essential functions of this job successfully. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Stand, walk, push, pull, reach overhead, and bend to the floor.
• Exert 1 to 25 pounds of force 75% of the time.
• Exert 26 to 50 pounds of force 20% of the time.
• Exert 50 plus pounds of force 5% of the time.
• Ability to read machine dial gages, blueprints, precision measuring instruments, and computer screens.
• Read English and understand sketches, routings, safety rules, operating and maintenance instructions, and procedure manuals.
• Communicate effectively with employees.

WORKING ENVIRONMENT

The work environment characteristics described here represent those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

• Indoor shop-based position.
• Moderate noise levels from operating machines.
• Physical hazards from moving equipment and machine parts.
• Machining fumes, dust, and mist.
• Skin exposed to oils and cutting fluids.

Compensation details: 35-45 Hourly Wage

PIfe3072403d93-26289-39495701

Bundy Baking Solutions is the world's leading manufacturer of baking equipment custom and stock baking pans and pan coatings. Built with extensive hands-on knowledge of the baking industry and its operations, Bundy has a legendary reputation for both quality and innovation.

• Studies sample parts, blueprints, drawings, and engineering information to determine methods and sequence of operations to fabricate product
• Operates metalworking machine tools, such as lathe, milling machine, drill, or grinder to machine parts to specifications
• Assembles parts into completed units using jigs, fixtures, hand tools, and power tools
• Fabricates, assembles, and modifies tooling, such as jigs, fixtures, templates, and molds or dies to produce parts and assemblies
• Verifies dimensions of parts, using precision measuring and marking instruments and knowledge of trigonometry within .0005
• Calculates and sets controls to regulate machining, or enters commands to retrieve, input, or edit computerized machine control media
• Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials onto machines
• Measures, examines, and tests completed units to detect defects and ensure conformance to specifications
• Dismantles machines, dies, or equipment, using hand tools and power tools, to examine parts for defect or to remove defective parts
• Cleans, lubricates, and maintains machines, tools, and equipment to remove grease, rust, stains, and foreign matter
• Confers with engineering, supervisory, and manufacturing personnel to exchange technical information
• Designs fixtures, tooling, and experimental parts to meet special engineering needs

• Knowledge of various machines such as cutting tools, lathes, milling machine, shaper, grinder
• Knowledge of powered tools
• Ability to read blueprints
• Ability to measure, mark and organize metal stock for machining
• The ability to exert maximum muscle force to lift, push, pull, or carry objects weighing 50 pounds
• The ability to choose quickly and correctly between two or more movements in response to two or more signals (lights, sounds, pictures, etc.). It includes the speed with which the correct response is started with the hand, foot, or other body parts
• The ability to quickly respond (with the hand, finger, or foot) to one signal (sound, light, picture, etc.) when it appears
• The ability to time the adjustments of a movement or equipment control in anticipation of changes in the speed and/or direction of a continuously moving object or scene
• The ability to communicate information and ideas in writing so others will understand
• The ability to remember information such as words, numbers, pictures, and procedures
• The ability to quickly and repeatedly bend, stretch, twist, or reach out with the body, arms, and/or legs

PIbefd11991366-26289-39921649

ABSOLUTELY NO SPSONSORSHIP OF ANY KIND (INCLUDING VISAS) PLEASE DO NOT APPLY

Toolroom Manager

Position Overview

The Toolroom Manager is responsible for overseeing the maintenance, repair, and performance of stamping dies and tooling that support production operations. This role leads the toolroom team and ensures tooling is properly maintained to support quality, efficiency, and production uptime. The position works closely with manufacturing, engineering, and maintenance teams to troubleshoot tooling issues, improve processes, and ensure tooling systems operate reliably.

Key Responsibilities

• Lead daily operations of the toolroom, including scheduling and coordinating die maintenance, repairs, and tooling improvements.
• Supervise and mentor tool and die technicians, providing technical guidance and training to support skill development and consistent workmanship.
• Troubleshoot stamping dies, tooling components, and press-related issues to reduce downtime and support efficient production.
• Establish and maintain organized toolroom processes including preventative maintenance schedules, tooling records, and repair documentation.
• Collaborate with engineering and production teams to identify tooling improvements and support new product launches.
• Analyze recurring tooling issues and coordinate corrective actions to improve reliability and performance.
• Ensure tooling repairs and maintenance meet required tolerances and quality standards.
• Support continuous improvement initiatives related to press uptime, tooling life, and overall manufacturing efficiency.
• Maintain a safe and organized working environment within the toolroom.
• Coordinate priorities and workload within the toolroom to ensure production needs are supported.
• Maintain records related to die maintenance, repairs, and tooling performance history.

Qualifications

• Strong background working with tool and die operations in a metal stamping environment
• Previous experience leading, training, or mentoring tool and die technicians
• Solid understanding of stamping dies, die maintenance, and press troubleshooting
• Ability to read and interpret blueprints, engineering drawings, and die specifications
• Experience operating or supporting toolroom equipment such as mills, grinders, lathes, and related machining equipment
• Strong mechanical troubleshooting and problem-solving abilities
• Ability to organize tooling processes and manage multiple priorities in a fast-paced manufacturing environment
• Strong communication and leadership skills

Work Environment

This position operates primarily within a manufacturing environment supporting stamping operations and tooling activities. The role requires regular movement throughout the toolroom and production floor and exposure to typical industrial conditions including machinery, noise, oils, and metalworking equipment.

Lead Enterprise Tooling Engineer — Tenant Inc.

Overview

Tenant Inc. is modernizing its enterprise tooling, automation, and visibility ecosystem to better support our engineering, operations, finance, sales, and customer support teams. The Lead Enterprise Tooling Engineer plays a critical role in this transformation by owning the strategy, architecture, and execution of integrations across Jira, Microsoft 365, HubSpot, Zendesk, Intuit Enterprise, ERP systems, and internal platforms. This role ensures that our business systems work together seamlessly, data flows reliably across the organization, and leaders have a unified view of operational performance.

By connecting enterprise tools with application telemetry and APM insights, this position enables a single source of truth for workflow health, customer impact, and cross-system reliability. The ideal candidate blends technical expertise with business acumen, ensuring that tooling investments directly support Tenant’s operational goals and modernization roadmap.

Key Responsibilities

Enterprise Tooling Architecture & Integration

• Design and maintain the integrations that connect our core business systems, ensuring information flows consistently across Jira, Microsoft 365, HubSpot, Zendesk, Intuit Enterprise, ERP platforms, and internal applications.

• Build automated workflows and API-driven processes that reduce manual effort, eliminate redundant work, and improve data accuracy.

• Lead the unification of identity, permissions, and user lifecycle management across enterprise tools to support operational efficiency and compliance.

• Oversee cross-platform data synchronization for contacts, leases, tickets, financial data, and operational workflows to ensure a consistent and reliable customer and business experience.

APM, Observability & Unified Visibility

• Integrate observability and APM platforms (OpenSearch, Prometheus, Grafana, New Relic, Catchpoint, CloudWatch, clickstream analytics) with enterprise systems to provide end-to-end visibility across the business.

• Connect system telemetry with business workflows—linking application performance to Jira issues, Zendesk tickets, HubSpot activities, and ERP events.

• Develop executive-ready dashboards that consolidate operational KPIs, workflow performance, integration health, and customer impact into a single pane of glass.

• Implement alerting and automated correlation to help teams identify issues faster and understand their business implications.

• Partner with DevOps and SRE to ensure observability data is actionable and accessible across the organization.

Workflow Automation & Process Optimization

• Design automated workflows that streamline processes across engineering, support, sales, finance, and operations.

• Build Jira workflows, dashboards, and governance structures that support predictable releases and cross-team alignment.

• Automate HubSpot → Jira → Zendesk → ERP workflows to reduce handoffs, shorten cycle times, and improve customer responsiveness.

• Partner with Finance to automate Intuit Enterprise and ERP processes such as invoicing, reconciliation, and reporting.

API Engineering & Custom Development

• Develop and maintain custom integrations, middleware, and internal tools that improve operational efficiency and reduce manual work.

• Implement reliable error handling, monitoring, and logging to ensure integrations remain stable and transparent.

• Ensure all integrations meet security, scalability, and compliance requirements.

Data Quality, Governance & Observability

• Establish data governance standards that ensure accuracy, consistency, and auditability across enterprise tools.

• Implement monitoring and alerting for integration health and workflow performance.

• Partner with Security and Compliance to maintain SOC2, PCI, and internal governance standards.

Cross-Functional Leadership & Collaboration

• Serve as the strategic and technical leader for enterprise tooling, automation, and observability initiatives.

• Partner with Engineering, Product, Support, Sales, Finance, and Operations to understand business needs and translate them into scalable solutions.

• Mentor engineers and administrators across Jira, HubSpot, Zendesk, and Microsoft 365.

• Promote best practices for automation, documentation, and cross-system reliability.

Operational Excellence

• Lead root cause analysis for integration and workflow issues, ensuring long-term solutions rather than short-term fixes.

• Reduce manual effort across departments through automation and improved tooling.

• Maintain clear documentation for integrations, workflows, and system dependencies.

• Evaluate new tools, vendors, and opportunities to improve operational efficiency and business outcomes.

Required Qualifications

• 7+ years in enterprise tooling, business systems engineering, DevOps, or integration engineering.

• Deep experience with APIs for Jira, Microsoft 365, PowerBI, HubSpot, Zendesk, and similar SaaS platforms.

• Hands-on experience with observability and APM platforms (OpenSearch, Prometheus, Grafana, New Relic, Catchpoint, CloudWatch, clickstream analytics).

• Strong scripting and automation skills (Python, Node.js, PowerShell).

• Experience designing workflow automation across multiple business systems.

• Strong understanding of identity management, SSO, and permission models.

• Experience with data governance, monitoring, and integration reliability.

• Proven ability to lead cross-functional initiatives and collaborate with business stakeholders.

Preferred Qualifications

• Experience with Intuit Enterprise, ERP systems, or financial system integrations.

• Background in multi-tenant SaaS environments.

• Experience improving customer experience through event-driven architectures (webhooks, queues, EventBridge, SNS/SQS).

• Familiarity with ETL pipelines, data warehousing, and analytics platforms.

• Experience supporting engineering release workflows and IT DevOps processes.

Success Indicators at Tenant Inc.

• A unified, executive-ready view of operational performance that connects APM telemetry, enterprise workflows, and business outcomes.

• Automated, reliable workflows across Jira, HubSpot, Zendesk, Microsoft 365, and ERP systems.

• Significant reduction in manual work across engineering, support, sales, and finance.

• Clean, consistent, and governed data across enterprise tools.

• Reliable integrations with clear dashboards, alerting, and business impact visibility.

• Strong cross-team alignment and measurable improvements in operational efficiency.

• A scalable, well-documented tooling architecture that supports Tenant’s modernization strategy.

#EnterpriseEngineering #BusinessSystems #ToolingEngineering #AutomationEngineering

#SystemsIntegration #APM #Observability

Description

Develop and support safety and continuous improvement activities by overseeing the tooling/fixture procurement process from design through build, including the supervision of tool makers & a broach bar technician. This includes machine shop fixtures and misc. work holding. The primary purpose of this position is to design innovative fixtures, assign work & direct the tool makers and manage/approve designs/procurement of our broach bar inventory. This position is critical in achieving operational excellence throughout the facility.

Requirements

· Design, implement, and trouble shoot work holding, gauges & equipment components used in production machines.

· Out-source work to vendors and follow-up with build schedules. Evaluate build time & skill level required to build items and determine cost & lead time. Follow-up to ensure build is on time.

· Issue purchase orders for materials and tool room supplies and ensure correct items are ordered and arrive on time.

· Supervise all shifts of the tool room & broach bar technician. Assign work, direct activities and ensure 90% on time completion. Mentor, train and motivate employees to continually develop their skills.

· Manage broach bar processes from design review/approvals, broach bar inventory management (quoting, ordering, and procurement), trouble shooting, and problem-solving broaching issues on the floor.

· Tool Room leadership, process, tooling, & fixture problem solving. Toolmaker training in best practices and promoting continuous improvement in Safety, Quality, Productivity, On-time delivery, & Employee Development.

· Identify areas for improvement and implement Lean Manufacturing principles to continually improve processes, equipment & practices.

- Establish & maintain professional relationships with internal and external stakeholders.

Competencies:

· Excellent communications skills to be able to interface with a multitude of various personalities & attitudes and still maintain a professional demeanor.

· 3D Solids modeling design experience, preferably PTC Creo.

· Can develop innovative tooling designs that are ergonomically sound and are easily machinable with proper GD&T and material call outs.

· Understands tool steels, nylons and various non-ferrous materials to help improve fixture durability while maintaining a lower cost.

· Capable of troubleshooting broach tooling issues or interested in learning about the use of these tools.

· Provide recommendations in broach bar design on new and existing broaching tools.

· Microsoft Word, Excel & Power Point knowledge & use.

Preferred Qualifications:

· Two-year associate’s degree in Tool and Die Design

· 5 to 7 years related to tooling design or tool room machinist experience.

· Supervisory skills and competencies

· PTC Creo modeling software experience

· Microsoft Windows Operating System

· AutoCAD (current version)

· Geometric Tolerances

· 5 to 7 years manufacturing processing experience

· 2 years Lean Manufacturing experience

· 3 to 5 years fixture troubleshooting experience

· 2+ years of broach bar design and usage experience preferred

Tool & Die Technician / Mold Maker – Competitive Salary + Benefits – Beatrice Nebraska

The Role

Are you ready to take your skills as a Tool & Die Technician to the next level? If the answer is yes, then let's get the ball rolling and make it happen!

We are looking for a Tool & Die Technician who will be responsible for performing mechanical and electrical trouble shooting, breaking down and repairing injection molds and other secondary tooling.

Key Responsibilities:

The key responsibilities of a Tool & Die Technician include, but are not limited to:

• Perform scheduled preventive maintenance (PM) and corrective maintenance on molds to ensure optimal performance.
• Assist in tooling version changes, engineering modifications, and continuous improvement projects.
• Break down, troubleshoot and repair/reassemble molds.
• Collaborate with production, quality, and engineering teams to resolve tooling and process-related issues.
• Keep tool area and machines clean and maintained.
• Maintain good communication with team members.
• Understand the job responsibilities in order to perform, monitor and control the process as it affects quality.
• Follow all procedures and work instructions pertaining to your assignment and make recommendations to improve the process.
• Appropriately record problems or non-conformances to ensure corrective action and preventive measures are taken.
• Notify the supervisor immediately when problems or non-conformances are detected.
• Assist in problem-solving process, corrective action and prevention activities.

The Company

Accuma Corporation has been a major manufacturer of plastic components for the battery industry for over 50 years. Producing battery containers, lids, vent-plugs and accessories

The Person

The key skills and qualities of a Tool & Die Technician are:

• Minimum Education – High School diploma or GED. Technical certification or associate degree in industrial maintenance, mold repair, or tooling preferred.
• Familiarity with hydraulic, pneumatic, and cooling systems used in injection molding equipment is preferred.
• Ability to read and interpret technical drawings, blueprints, and schematics.
• Experience with manual mills, lathes, and grinders would be beneficial.
• Must be well organized.
• Must have mechanical experience.
• Must have or be able to obtain a forklift license.
• Must be proficient in the use of measuring gauges.
• Must be able to frequently bend and lift parts for up to 12 hours.
• Must be able to pull up to 150 lbs with a hand truck.
• Must be able to lift 30 lbs over your head.

If you are keen on joining this exciting, forward-thinking company and taking the next step in your career, then please click the apply now button to find out more.