Dongo Tool Jobs in Usa

• 
  
• Ensure glove and hand safety.
  
• Follow bench grinder and surface grinder safety protocols.
  
• Use face shields appropriately.
  
• Inspect cranes and hoists and maintain logs.
  
• Properly rig and use cranes.
  
• Safely operate CNC mills and lathes, adhering to manufacturer and company safety protocols.
  
• Practice proper lifting techniques and recognize trip hazards.
  
• Complete safety skills and SED on time.
  
• Participate in monthly safety meetings.
  
• Follow all life-critical policies and JM Health and Safety policies.
  
• Use appropriate personal protective equipment (PPE) as required.
  
• Operate only the equipment for which you have been trained by a qualified person.
  
• Never tamper with machine safety guards or switches.
  
• Ensure setups can safely hold parts against cutting forces before starting machines.
  
• Exercise caution when running new programs, especially at the start and after tool changes.
  
• Know the location of emergency stops and practice using them.
  
• Maintain a tidy workspace to prevent accidents and injuries.
  
• Follow safety protocols for 2\" and hand grinders.
  

• 
  
• Start and home milling machines and lathes.
  
• Touch off tools, set offsets, and determine tool lengths and diameters using a tool setter.
  
• Load programs through Predator and USB and send proven programs back for updates.
  
• Adjust and edit tools and work offsets.
  
• Set XYZ and Z coordinates.
  
• Load and unload workpieces for milling operations.
  
• Change tool setter and probe batteries.
  
• Perform pre-production maintenance checks and clean machines.
  
• Change machine filters and check/fill coolant levels.
  
• Read refractometers for coolant concentration.
  
• Stone machine tables, fixtures, vises, chucks, and turrets prior to use.
  
• Perform basic mill setups, including indicating fixtures and vises.
  
• Setup mill and lathe tools and replace or identify worn tooling.
  
• Indicate vises and fixtures, change jaws, and set clamps.
  
• Use proper collets and holders for tools, demonstrating proper use.
  
• Follow and update Standard Operating Procedures (SOPs).
  
• Clean machine tool tapers and verify delivery of coolants and fluids.
  
• Empty chip bins and containers.
  
• Deburr finished parts and clean raw materials prior to loading.
  
• Grease vises and use machine DRO to understand machine positions.
  
• Clean collets and remove the chips, and clean tool holder caps before and after use.
  

• 
  
• Understand basic GD&T.
  
• Measure and verify length, width, and diameter of raw materials.
  
• Inspect and identify materials by type.
  
• Properly use and care for measurement equipment.
  
• Measure part/feature height/depth with depth micrometers.
  
• Measure with calipers (vernier, dial, and digital), ID micrometers, and OD micrometers.
  
• Measure threads with thread gauges.
  
• Measure part features, profiles, and dimensions optically or comparatively.
  
• Review part prints and identify critical dimensions.
  
• Verify milled and turned parts for quality and compliance.
  
• Test and verify calibrations of inspection tools.
  

• 
  
• Perform area housekeeping.
  
• Conduct shift changes and exchange information effectively.
  
• Maintain a good attitude and be a team player.
  
• Meet or exceed standard run times.
  
• Perform non-routine task lists and operator maintenance tasks.
  
• Maintain coolant levels and check concentration.
  
• Report any maintenance needs to the lead.
  
• Attend minute meetings on time.
  
• Provide useful suggestions that contribute to positive work results.
  
• Ensure the work area is ready for the next user.
  
• Accurately check tools out of the tool crib.
  

• 
  
• Minimum of 1-3 years' experience is required
  
• Extensive experience as a CNC Technician with a focus on safety and operational competencies.
  
• Strong understanding of CNC machine setup, maintenance, and troubleshooting.
  
• Ability to read and interpret technical documents and blueprints.
  
• Proficiency in using tool setters, collets, holders, and other CNC-related tools.
  
• Excellent attention to detail and problem-solving skills.
  
• Ability to follow and update SOPs.
  
• Strong communication and teamwork skills.
  

• 
  
• Ability to lift and move heavy objects up to 50 lbs.
  
• Prolonged periods of standing and working on machines.
  
• Manual dexterity and hand-eye coordination.
  

• 
  
• Manufacturing plant with exposure to noise, dust, and machinery.
  
• Use of personal protective equipment (PPE) as required.
  

** We will only consider applicants who are currently residing in South Florida**

About MMG

MMG Equity Partners is a Miami-based, family-led real estate investment and development platform with a portfolio of retail shopping centers across South Florida. Beyond the real estate business, MMG operates a private family office that manages investments, insurance, and financial reporting across multiple entities and family members. MMG separately owns Tamarack Resort in Idaho. We are a flat, fast-moving organization where you will work directly with principals — not layers of management.

This is a ground-floor role. We are building the function from scratch. The right person will define what AI means at MMG, then build it.

The Role

The Director of AI Initiatives & Adoption is responsible for identifying, implementing, and managing AI tools and systems that meaningfully improve how MMG operates across real estate and family office functions. Every project you take on must connect to a business outcome — faster decisions, better data, more deals, reduced overhead.

You will own four things: identifying where AI creates real value at MMG, building or procuring the tools to capture that value, driving adoption across the team and continuously improving how those tools are used, and ensuring the systems are secure and maintainable. Implementation without adoption is not success.

• Reports to Managing Director
• Direct reports - contractors and freelancers as needed
• Current IT Enviroment - outsourced IT for network support

Current Tech Stack (what you are walking into)

You need to understand these systems deeply. Part of your job is figuring out how to connect them and leverage AI to make us more productive/competitive

What you will work on

Below are four areas where we believe AI creates the nearest near-term value at MMG. You first job is to work with the leaders in each area to assess each, prioritize, and build a 6-month roadmap. In addition to the below, the right individual will identify a myriad of other AI use cases to add value and reduce repetitive tasks.

1. Leasing and Tenant Prospecting

MMG owns retail shopping centers and is responsible for filling vacancies with the right tenants – while we work with third party leasing firms, we wish to supplement their efforts by generating direct leads.

• Design and build AI scraping tools to compile databases of South Florida retailers and service businesses for targeted uses
• Build a tool to identify prospective uses/tenants: given a vacancy (size, location, co-tenancy, demographics), which business types and specific operators are the best candidates?
• Design and build AI-assisted leasing outreach workflow: targeted uses identified for vacancies → database queried → outreach drafted and sent → responses tracked in Dynamics (or other CRM)
• Activate Microsoft Dynamics (or other) as the CRM for online leasing
• Identify tools or workflows to monitor existing tenant health (sales reporting, foot traffic, business review signals) to get ahead of vacancies before they happen
• Identify and implement AI-assisted lease abstracting tool to best fit our environment

2. Real Estate Acquisitions

MMG evaluates potential acquisitions across South Florida. Today this process is manual and dependent on individual knowledge. AI can accelerate every stage.

• Design and build AI scraping tools to compile databases of South Florida real estate owners
• Build an AI-assisted underwriting workflow that pulls property data, comps, and market context into a structured analysis template
• Identify AI tools for market intelligence — rent growth trends, cap rate movements, retail category performance by submarket
• Evaluate AI-powered deal sourcing tools (e.g. CoStar integrations, off-market sourcing platforms

3. Private Family Office

MMG's family office manages investments, insurance, and financial reporting for family members. This is a sensitive area requiring strict data governance — but it also has high-value AI applications.

• Addepar AI integration: explore ways to use AI to generate plain-language investment performance summaries and financial reports from Addepar data, reducing manual reporting time
• Insurance management: build a structured database or AI assistant for tracking insurance policies (G/L, personal property, family member policies) with renewal alerts and coverage gap analysis
• Document intelligence: connect family office files in SharePoint to an AI interface for on-demand retrieval of partnership agreements, tax documents, and legal filings
• Evaluate data governance and access controls for family office data — this is sensitive personal and financial information; AI access must be role-based and audited

IT Infrastructure and Security

You are not a network administrator — we have an outsourced IT firm for that. But you are responsible for AI governance at MMG: ensuring every AI tool introduced into the environment meets a clear security and accountability standard.  Practically, this means:

• Evaluating AI vendors for data handling practices — what data leaves our environment, where it is stored, and how it is used for model training
• Defining and enforcing a data classification policy: what information can be sent to external AI APIs, what must stay on-premise or in private cloud environments
• Working with IT firm to ensure AI tools are deployed within the MS365/Azure security perimeter where possible
• Evaluating the Claude Teams → Claude Enterprise migration and the Microsoft Connector configuration for SharePoint access — specifically, controlling which documents are accessible to AI and by which users
• Vetting any third-party AI integrations (i.e. ZoomInfo, Yardi, etc.) for compliance with firm data policies

Prompt Library & AI Adoption

Building the tools is only half the job. The other half is making sure the team actually uses them — and uses them well. This requires two ongoing responsibilities that most AI roles underestimate.

Prompt Library

You will build and maintain a living prompt library — a curated set of tested, optimized prompts for every recurring AI task at MMG. Examples include: underwriting analysis from a rent roll, lease abstraction for a specific clause type, tenant outreach drafts by use category, and insurance renewal gap analysis. The library lives in SharePoint, is accessible to the full team, and is updated continuously based on user feedback and evolving business needs. A well-maintained prompt library is what turns AI from a tool that one person uses well into a capability that the whole organization depends on.

Adoption Monitoring & Continuous Improvement

You are responsible for whether AI tools actually get used — not just whether they get deployed. This means tracking adoption across the team, identifying where workflows are not sticking, providing training and troubleshooting support to staff using AI tools, and iterating on both the tools and the prompts based on real usage patterns. You will serve as the primary internal resource for the team when they hit limitations or need guidance on how to get better outputs. Deployment without adoption is a sunk cost.

What we are looking for

Required:

• 3–6 years of experience in data, technology, or AI — ideally in a context where you had to figure things out without a large team around you
• Hands-on experience with AI tools and LLM platforms — not just using them, but building workflows, prompts, and integrations on top of them
• Demonstrated ability to connect AI capabilities to specific business outcomes (not just technology for its own sake)
• Comfort with the Microsoft 365 ecosystem — SharePoint, Dynamics, Teams, Azure
• Ability to manage and direct contractors and developers without being the one writing all the code
• Non-technical stakeholder communication — you will regularly present AI recommendations, tool evaluations, and implementation roadmaps directly to the principal(s) who are real estate operators, not technologists. The ability to translate AI capabilities into business outcomes (not feature lists) is non-negotiable. If you cannot explain why a tool matters in terms of time saved, deals sourced, or risk avoided, you will not be effective in this role
• In-office presence at Pinecrest HQ is required initially (possible hybrid in the future)

Preferred

• Experience in commercial real estate, property management, or a related field
• Familiarity with Yardi, Addepar, or similar platforms
• Background that includes both technical work (building things) and strategic work (recommending what to build)
• Experience implementing AI in a small-team / resource-constrained environment

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Aircraft Structures Mechanic to join our Join and Installation team in Everett and Renton, Washington.

As an Aircraft Structures Mechanic, you will utilize your manufacturing knowledge to set up tools and equipment for drilling and fastening complex structures, including composite materials. You will operate various hand and machine tools, including automated equipment, to perform tasks according to specifications while ensuring safety and quality standards. Your responsibilities will include recognizing and reporting any equipment malfunctions, performing maintenance, and coordinating the movement of materials and tools. You will also cut, assemble, and install components, verify your work against specifications, and handle hazardous materials safely.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Review daily reports and consult with team leaders to determine job assignments and obtain necessary documentation.

• Locate work areas using specified drawings and paperwork.

• Verify kitted parts against installation plans and bill of materials, ensuring they are suitable and defect-free.

• Retrieve non-kitted parts from designated areas, ensuring compliance with specifications.

• Use electronic devices to access work instructions and engineering data (personal cell phones not permitted).

• Select and utilize appropriate hand and power tools for assembly tasks, including precision alignment equipment.

• Move kits, carts, and equipment within the work cell as needed.

• Load/unload jigs and operate mechanical lifts for assembly work.

• Locate tools and parts on aircraft using specified methods and set up assembly tools per instructions.

• Handle hazardous materials safely and dispose of them properly.

• Inspect completed work for defects and cleanliness before submission for inspection.

• Perform minor rework and maintain tool control in accordance with procedures.

• Maintain personal and tool certifications and seek assistance from supervisors when necessary.

• Set up tools and equipment for drilling and fastener installation in complex structures.

• Operate various hand and machine tools, monitoring equipment functionality and performing routine maintenance.

• Coordinate the movement and preparation of materials and tools for tasks.

• Cut, file, drill, and assemble parts, ensuring proper fitting and quality standards.

• Conduct reaming, riveting, and sealing operations, applying corrosion inhibitors as needed.

• Utilize calibrated tools to verify work against specifications and ensure quality.

• Manage equipment and materials within the work cell to ensure efficient workflow.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting. 

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This positions requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English.

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• This position offers relocation based on candidate eligibility.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.32/hour, with potential to earn up to $54.76/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Apr. 10, 2026

Language Requirements

English Preferred

Relocation

This position offers relocation based on candidate eligibility.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Summary

Under the direction of the Tool Room Manager, the Mold Designer is responsible for all design-related requirements of the Tool Room. This will include Data management, stamping and extrusion dies, replacement components, new molds, and manufacturing needs involved during tool builds. This will be achieved while maintaining HellermannTyton's Quality and EHS certifications by supporting all corporate policies, procedures, work instructions, and required documentation.

Essential Functions:

• 
  
  
• Responsible for all data management based on Tool Room needs.
  
  
• Full mold/tool design as required.
  
  
• Assist in tooling (project management) from conception to mold/tool completion.
  
  
• Ensure that all tooling forms/paperwork are being filled out properly.
  
  
• Assist in coordinating work with outside tooling houses.
  
  
• Attend design reviews as required.
  
  

Other Functions

• 
  
  
• Work with QA on quality issues
  
  
• Perform other tasks as assigned
  
  
• Assist in maintaining HellermannTyton's Quality Management System and ISO 14001 certification by supporting corporate policies, procedures, work instructions, and required documentation
  
  
• Required Personal Protective Equipment * safety shoes are to be worn at all times during your scheduled work hours. * Department manager/supervisor will cover additional PPE as required on department-specific work instructions.
  
  

Key Competencies

• 
  
  
• Full mold design abilities, parting line development, and solid modeling.
  
  
• Ensure that all plant rules, policies, and procedures are being adhered to.
  
  
• Maintain CAD databases for replacement components and new tooling.
  
  
• Ensure that all tooling forms/paperwork are being filled out properly.
  
  
• Assist in coordinating work with outside tooling houses.
  
  

Qualifications (skills, knowledge, experience)

• 
  
  
• Associate degree or Tool & Die Apprentice certificate from an accredited institution.
  
  
• Prior experience with CAD software required.
  
  
• 5 years of experience in plastic injection mold design.
  
  
• Experience in creating mold parting lines.
  
  
• Experience in stamping dies helpful.
  
  
• Prior Tool Room experience.
  
  

#LI-Hybrid #LI-DM3

By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position.

HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Job Title: Estimator – Tool & Die Manufacturing

Salary: $70,000 – $80,000 per year

Bonus: Annual Christmas Bonus

Schedule: Day Shift | Monday–Friday | 7:00 AM – 3:30 PM

We are seeking an experienced Estimator to join a well-established tool and die manufacturing job shop that specializes in precision tooling, molds, fixtures, and dies used in metal and thermoforming production. This is a key role within the organization, responsible for developing accurate project estimates and supporting the sales and engineering teams in preparing competitive quotes for customers.

This position is open due to a retirement, and the outgoing estimator is currently working with the team to ensure a smooth transition and knowledge transfer. The estimator will collaborate closely with engineering, sales, and manufacturing teams to determine the cost, materials, labor, and production requirements for custom tooling projects.

This is an excellent opportunity to join a stable, family-owned manufacturing company where many employees have built long-term careers.

Key Responsibilities

• Prepare accurate cost estimates and quotes for custom tooling, molds, fixtures, and dies.
• Review RFQs, drawings, and project specifications to determine scope, materials, labor, and production requirements.
• Collaborate with engineering, sales, and design teams to gather project requirements such as durability, material specifications, and operating conditions.
• Calculate costs related to: Raw materials (steel, specialty metals, etc.), Labor and machining time, Outsourced processes or third-party services, Shipping and logistics
• Develop detailed proposals and pricing structures for customers.
• Maintain documentation including BOMs (Bill of Materials), cost breakdowns, and pricing data.
• Evaluate project timelines and production requirements to ensure estimates align with manufacturing capabilities.
• Track projects and adjust estimates when production costs or timelines change.
• Support the sales and engineering teams by ensuring quotes are competitive and technically accurate.

Products & Projects May Include

• Tool and die components
• Thermoforming molds
• Foil dies
• Tooling fixtures
• Chucks and collets
• Precision tooling used on press machines and CNC equipment
• Custom tooling for sheet metal production

Required Qualifications

• Experience in estimating or cost analysis within a manufacturing or machine shop environment
• Strong understanding of tooling, fixtures, dies, or metal manufacturing processes
• Ability to read and interpret blueprints and engineering drawings
• Familiarity with Bill of Materials (BOMs) and manufacturing cost breakdowns
• Experience evaluating materials, machining time, labor, and production costs
• Strong collaboration skills with engineering, sales, and production teams

Preferred Experience

• Experience in tool and die, mold making, or machining environments
• Knowledge of steel materials and tooling applications
• Exposure to CNC machining, thermoforming molds, or stamping dies
• Experience using 3D models or CAD drawings during quoting processes

Our client, a well-established leader in industrial manufacturing solutions, is seeking a Technical Sales Representative with strong cutting tool and metal cutting experience to drive growth across distribution channels and end-user accounts.

This role is ideal for a sales professional with hands-on chip making knowledge who understands machining processes at a technical level and can confidently consult with manufacturing engineers, machinists, production managers, and procurement teams.

Position Overview:

The Technical Sales Representative will be responsible for growing revenue within an assigned territory by promoting high-performance cutting tools, carbide inserts, indexable tooling, solid carbide end mills, drills, reamers, and metal removal solutions. The successful candidate will combine industrial sales expertise with a deep understanding of CNC machining, feeds and speeds optimization, tool geometry, carbide grades, coatings, and metal cutting applications.

This is a consultative, solution-based sales role focused on supporting both industrial distributors and end-user manufacturing facilities, including job shops, production machining environments, and OEM manufacturers.

Key Responsibilities:

• Drive territory sales growth of cutting tools and metal cutting solutions through both distribution partners and direct end users
• Provide technical application support on CNC milling, turning, drilling, and chip making operations
• Advise customers on proper feeds and speeds, tooling geometry selection, carbide grades, coatings, tool life optimization, and cycle time reduction
• Conduct onsite visits to evaluate machining processes and recommend productivity improvements
• Collaborate with manufacturing engineers and machinists to improve surface finish, tool performance, and cost per part
• Develop strong relationships with industrial distributors while expanding penetration within end-user accounts
• Identify opportunities for process improvement, tooling standardization, and metal removal efficiency
• Support new product introductions and promote advanced tooling technologies

Qualifications:

• Proven experience in cutting tool sales, industrial tooling sales, or metalworking sales
• Strong technical understanding of chip making processes, CNC machining, feeds and speeds calculations, tool geometry, and carbide grades
• Experience calling on industrial distribution networks and end-user manufacturing accounts
• Knowledge of metal removal applications including milling, turning, drilling, tapping, and boring
• Ability to communicate effectively with machinists, programmers, production supervisors, and engineering teams
• Demonstrated success in territory management, account development, and consultative technical sales

What We’re Looking For:

We are seeking a driven sales professional who can bridge the gap between technical machining knowledge and revenue growth. The ideal candidate understands how cutting tool performance impacts throughput, scrap reduction, machine utilization, and overall manufacturing productivity.

If you have a background in industrial sales, machining, metal cutting, carbide tooling, or CNC applications engineering and are ready to leverage that expertise into a high-impact technical sales role, we want to hear from you.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Test and Evaluation (BT&E) is seeking multiple Machinist Assemblers Precision to join our Machinist departments in either Seattle, WA or Tukwila, WA.

Machinists in this position participate in the design, fabrication and assembly of various production and research projects. Using a variety of precision machines (e.g., lathes, grinders, EDM, CNC and milling machines) to support aircraft engineering and production groups.

Position Responsibilities:

• Perform bench work (e.g., drilling, honing, tapping, reaming) on production and experimental parts, as required
• Assemble parts using rivets and bolts with correct tools such as rivet squeeze, lock bolt puller, rivet gun and bucking bar, power screwdriver, or ratchet per engineering requirements
• Lay-out, plan and sequence machining operation
• Analyze and interpret drawings, sketches, blueprints and verbal instructions to determine work to be performed on detailed precision parts (e.g., aircraft castings, fixtures, tools, shop aids)
• Use shop math, geometry and/or trig to calculate dimensions
• Determine/obtain raw material to be used (e.g., brass, aluminum, steel, composites, and wood) for machining or fabrication per drawing or customer requirements
• Set up operate and adjust all common machine tools (e.g., lathe, mill, bridgeport, electrical discharge machine (EDM), drill press) to accomplish work on precision assemblies
• Select machine to be used in machining process
• Check machine to be used for missing, loose, damaged equipment, check oil and coolant levels and fill, as required
• Write programs as required for multi axis machines
• Adjust machine settings (e.g., speeds and feeds) to correct machining problems or to prepare machine for next operation in sequence
• Perform minor editing of CNC programs per shop requirements
• Select and check cutting tools per program or CNC documents
• Ensure cutters are the correct type, length, diameter, radius, and are in good condition
• Select machine accessories and holding devises (e.g., chucks, vises, turntables)
• Verify that apparatus is in good condition
• Identify fixtures and/or shop aids to be built and fabricate as required using mill, lathe, bandsaw, drill press, sander and grinder
• Attach machine accessories, tools and shop aides using dial indicators, edge finders, wrenches, bolts, clamps, and overhead cranes
• Monitor machine during operation for unusual vibration or sounds, watch machine gauges and controller display or digital readout for warnings, visually check cutter path, clearance and chips to ensure smooth operation
• Check work with precision instruments (e.g., micrometers, dial indicators, height gauges) and ensure parts are free from defects (e.g., finish, dimensions, mismatch, tool marks) and complete per drawing, sketch or verbal instructions
• Assemble, fit, check, test of developmental machine parts and assemblies to customer specification
• Troubleshoot and test precision assemblies with working groups (e.g., engineering, production, inspection, manufacturing resource & development (MRD)) to resolve tooling/production problems
• Handle and dispose of hazardous materials (e.g., coolants, solvents) in approved manner (per Material Safety Data Sheets) using personal protective equipment, as required
• Maintain personal tool certifications, as required
• Ability to use computers and knowledge and ability to use MSWord, Excel, Outlook, etc.
• Must be willing to work variable shifts, including weekends and overtime; some positions may also be rotating shifts

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet export control compliance requirements. To meet export control compliance requirements, a "U.S. Person" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.

Basic Qualifications (Required Skills/Experience):

• 1+ years of experience with multiple Computer-Aided Design (CAD) and/or Computer-Aided Manufacturing (CAM) applications (e.g. Mastercam, CATIA V5, Unigraphics, etc.)
• 1+ years of experience programing, setting-up and running lathes, grinders, mills, and Computer Numerical Control (CNC) machines
• Experience reading G and M codes

Preferred Qualifications (Desired Skills/Experience):

• Experience with ENOVIA design tool
• Completed training as a journeyman machinist
• Graduated from an Machinist Apprenticeship program or completed a Machining Certificate

Drug Free Workplace :

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

These positions are for either 1st or 2nd shift; however, there may be additional shift requirements to support program objectives.

Union:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will be considered as this job is not installed in QTTP.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range: $33.32/hour to start for new union members, with potential to earn up to $61.01/hour, at max pay

Applications for this position will be accepted until Mar. 21, 2026

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer, you will play a vital role in our commitment to excellence in aviation by ensuring the safety and quality of our aircraft. Your expertise will be essential as you meticulously verify parts and fasteners against stringent specifications, set up assembly tools, and align components based on engineering drawings and installation plans. In this dynamic environment, you will engage in the installation and rework of various interior parts and assemblies, enhancing both functionality and aesthetics. Your dedication to quality will shine through as you conduct thorough inspections of your work, ensuring compliance with our high standards and promptly addressing any discrepancies.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation

Position Responsibilities

• Review job assignments using bar charts, SOI, IP, and consult with leads to obtain necessary drawings.

• Locate work areas using drawings and electronic resources that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials for accuracy and suitability.

• Determine and obtain the correct fasteners from PCA/MMO control per specifications.

• Set up assembly tools according to tooling instructions, ensuring locators are correct for the model.

• Align and secure parts on the airplane using tooling holes and clamps, checking for proper margins.

• Install and rework interior parts and assemblies, including carpets, stowbins, and seats.

• Select and use appropriate drill bits, reamers, and countersinking tools for pilot and full-size holes.

• Drill, ream, and countersink holes in parts/assemblies per specifications and instructions.

• Disassemble parts, deburr holes, and prepare surfaces for fastener installation.

• Apply sealants, primers, adhesives, and corrosion-inhibiting compounds as required by specifications.

• Install fasteners in the correct sequence using appropriate tools, adhering to specifications.

• Mark and symbolize work for subsequent riveting and install cables and wire bundles as needed.

• Inspect completed work for defects, ensuring compliance with engineering drawings and report any job handicaps.

• Move kits, carts, and equipment within the work cell to facilitate workflow and maintain personal and tool certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications

• 1+ years of experience in manufacturing, automotive, construction, aerospace or similar industry; this can include education and Military.

• 1+ years of experience following oral and written instructions in the form of blueprints, drawings, work instructions.

• 1+ years of experience using hand and power tools

• Ability to stand 6-8 hours per day; walk constantly; climb or work from stairs/steps/ladders; bend and twist frequently; squat and kneel.

• Ability to wear hearing protection (ear inserts, canal caps, earmuffs); eye protection.

• Ability to use hazardous chemicals.

Preferred Qualifications:

• 1+ years of experience installing aerospace components, construction or automotive assemblies with precision measurement tools, hand and power tools.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.  

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.  

Applications for this position will be accepted until Apr. 15, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

The Digital Products Configuration Management (DPCM), formerly known as Software Configuration Management (SWCM), department, is hiring a Principal Digital Product Configuration Management Engineer. The DPCM department provides innovative solutions through automation, continuous improvement, and a skilled workforce providing support for all digital products.

The term 'Digital Product' (DP) refers to, but is not limited to, the following software types and their associated data and documentation: embedded (tactical) software, applications, Built-in Test (BIT) software, reprogramming tools, simulation software, test equipment, configurable logic, Application-Specific Integrated Circuit (ASIC) design, analytical tools used to formally qualify deliverable artifacts, Model Based Systems Engineering (MBSE) system models or related artifacts, Free Open Source Software (FOSS), and Commercial Off-The-Shelf (COTS) software.

Note This position will be filled onsite at the RTX Facility Huntsville, AL.

What You Will Do

• Perform builds and releases of digital products manually and/or certified pipelines
• Facilitate/Participate in the Process Change Boards (PCBs)/Digital Change Review Boards (DCRBs)
• Maintain, control, and administer of the Digital Products Development Library (DDL) (formerly known as Software Digital Library (SDL) tools
• Maintain control, traceability, consistency, and security of all configuration items across the digital development lifecycle
• Perform and maintain configuration planning & identification, change management & version control, status accounting, and configuration audits
• Manage digital product development/media libraries
• Document and maintain guidelines and standards for dependency management, build and versioning
• Provide DPCM Tool administration / management control/access to CM relevant tools/applications (i.e. Microsoft Azure DevOps Server (ADS), Git, Gitlab, GitHub, Jira, Bitbucket, Confluence)
• Administer/manage/use DevSecOps tools like Coverity, Artifactory, Jenkins, Nexus, GitLab CI/CD, Bamboo
• Coordination of data transfers, courier support among various environments
• Lead coordination of various digital product releases and interface with functional and program leadership ensuring on-time delivery and configuration management execution in digital development environment/area

Qualifications You Must Have  

• Typically requires BS/BA Degree in Science, Technology Engineering or Mathematics (STEM) a minimum 8 years of prior engineering experience
• Experience with version control and change management/agile planning tools
• Experience with DPCM/DevSecOps technology, Information Technology (IT), and/or development/scripting
• Experience with Automation shell scripting in Linux, Unix, and Windows
• Active and Current Secret security clearance is required Day 1. U.S. citizenship is required, as only U.S. citizens are eligible for a security clearance

Qualifications We Prefer

• Advanced knowledge in Digital/Software Configuration Management principles, process, and implementation/execution
• Solving complex problems, sharing knowledge, and documenting work
• Experience with DPCM/SWCM tools (Microsoft Azure DevOps Server (ADS) - Git, Bitbucket, IBM Rational Team Concert (RTC), and/or IBM Rational ClearCase, Synergy, Jenkins, Artifactory
• Experience with scripting programming languages (i.e., Perl, shell, batch, Python, Ruby, or YAML)
• Experience with Continuous Improvement, Continuous Integration and Continuous Deployment (CI/CD), GitFlow, and Agile concepts
• Database/DPCM/SWCM tool administration experience
• Proven experience with configuration management concepts and implementation
• Experience with digital/software industry best practices such as Capability Maturity Model Integrated (CMMI)
• Proven collaboration and effective communication with cross functional organizations

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role
• Onsite Employees who are working in Onsite roles will work onsite. This includes all production and maintenance employees, as they are essential to the development of our products

This position requires security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here:  : Huntsville, AL

• We Are RTX

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms