Dongo Tool Jobs in Usa

Job Title: CNC Programmar

Location: Middlebury, Indiana

Job Type: Full - Time

Position Summary

The CNC Process Engineer is responsible for leading the standardization, optimization, and continuous improvement of CNC machining operations across multiple identical vertical machining cells. This role transforms subject matter expertise into standardized, repeatable documentation and structured support systems to improve reliability, repeatability, and operational uptime.

The CNC Process Engineer serves as the advanced technical escalation point for complex machining issues, drives tooling and process optimization initiatives, and collaborates closely with tooling vendors to implement innovative machining solutions.

Key Responsibilities

Process Standardization & Documentation

• Capture and formalize tribal knowledge from CNC subject matter experts into structured documentation.
• Develop, implement, and maintain Standard Operating Procedures (SOPs).
• Create Operator-Driven Reliability (ODR) tasks to support proactive maintenance.
• Standardize documentation across identical machining cells while identifying process exceptions.
• Develop troubleshooting guides, flowcharts, and decision trees for rapid issue resolution.

Technical Leadership & Escalation

• Establish clear escalation tiers for operators, skilled trades, and CNC engineers.
• Serve as the primary escalation point for advanced CNC troubleshooting.
• Perform root cause analysis on recurring or complex machining failures.
• Improve process reliability, repeatability, and machine uptime.

Continuous Improvement & Optimization

• Lead cycle time reduction and process stability initiatives.
• Optimize tooling strategies including tool selection, feeds and speeds, and tool life management.
• Address chip evacuation challenges in high-volume machining environments.
• Collaborate with tooling vendors to design and implement custom tooling solutions.
• Improve machining efficiency across palletized and automated systems.

Training & Development

• Develop training materials and process documentation.
• Deliver hands-on training to operators, skilled trades, and engineering personnel.
• Support knowledge transfer and capability development within the organization.

Required Qualifications

• Minimum of 5 years of CNC machining or CNC process engineering experience.
• Strong technical writing and documentation skills.
• Proven expertise in troubleshooting and root cause analysis.
• Demonstrated experience driving continuous improvement initiatives.
• Ability to work hands-on in a manufacturing floor environment.

Preferred Qualifications

• Experience with Haas NGC control systems.
• Knowledge of Haas Advanced Tool Management (ATM).
• Proficiency in global macro variables, mathematical operators, and logical functions in CNC programming.
• Advanced CAM programming experience.
• Strong G-code programming capabilities.
• Experience with Midaco or similar pallet change systems and programming.
• Extensive knowledge of tooling selection, application, and high-volume machining strategies.
• Experience with automated fixturing, pallet systems, and robotic automation integrated with CNC machining.

Seeking an experienced Setup Cold Heading Technician to support production within a high-volume metal forming environment. This role focuses on performing machine setups, tooling changes, and process adjustments on cold heading equipment to ensure parts are produced efficiently and meet quality standards.

The technician will play a key role in maintaining production flow by preparing machines for new jobs, resolving equipment issues, and ensuring finished components meet engineering specifications. This position requires hands-on experience with cold heading equipment, strong mechanical troubleshooting ability, and a commitment to safety and continuous improvement.

Responsibilities

• Perform complete machine setups and changeovers on multi-die cold heading equipment.
• Install, align, and adjust tooling including dies, punches, knockouts, and cutoff components.
• Configure feed systems, timing mechanisms, and forming stations for optimal production.
• Conduct first-piece inspections and verify part quality prior to full production runs.
• Interpret blueprints, job instructions, and technical drawings to ensure proper machine configuration.
• Monitor production output and make process adjustments to maintain dimensional accuracy and quality standards.
• Troubleshoot machine issues such as misfeeds, alignment problems, tooling failures, and dimensional variation.
• Inspect tooling for wear or damage and coordinate repairs or replacements when necessary.
• Use precision measuring instruments including micrometers, calipers, gauges, and optical measuring tools.
• Record setup parameters, inspection data, and production information as required.
• Follow established quality standards and manufacturing procedures.
• Maintain a clean, organized, and safe work environment while following all company safety policies.
• Perform lockout/tagout procedures when conducting setups or machine maintenance.
• Support process improvements aimed at reducing scrap, improving efficiency, and increasing production reliability.
• Communicate effectively with production, quality, and tooling teams to resolve manufacturing challenges.

Qualifications

• High school diploma or GED required.
• 2–5 years of experience working with cold heading equipment or similar metal forming machinery.
• Experience performing machine setups and tooling changes in a manufacturing environment.
• Familiarity with multi-die cold heading machines (National, Sacma, Hatebur, or similar equipment).
• Ability to read and interpret engineering drawings, blueprints, and technical documentation.
• Proficiency using precision measuring instruments such as micrometers, calipers, and thread gauges.
• Strong mechanical troubleshooting and problem-solving abilities.
• Basic computer skills and familiarity with ERP systems and Microsoft Office tools.
• Ability to follow written and verbal instructions and communicate effectively with team members and auditors.
• Strong attention to detail with a focus on product quality and safety.
• Ability to work independently while maintaining productivity and accuracy.

What We Offer:

Competitive hourly compensation + OT

medical, dental, vision insurance

401k plan

PTO + holidays

Relocation support for candidates moving to Minnesota

Duration: 12+ Months (Contract with possible extension)

Work Hours: 8a-5p (Possibly some overtime)

Job Description:

• Partially Onsite (Typical onsite Tues/Thurs, remote M,W,F).
• Required Skills: PowerBI, Tableau, SQL, MS Access, MS Excel Nice to Have: GIT, Python
• Day To Day: This person will be developing new tools that support the business of I/S. They will be meeting with customers to understand the business needs and gather requirements, propose a solution, develop the needed solution, test, present to customers, communicate the new tool to the business including training and presenting, maintenance tools as needed. We build dashboards, models, and reporting tools for our customers.
• Soft Skills This person will need to be able to clearly communicate (written and verbally) with all levels of management. They will need to be able to understand processes, data logic, business logic, and be able to put requirements into written form. They will need to be able to connect the dots between processes and understand the big picture. They will need to be critical thinkers and problem solvers. They will need to be curious and take initiative to dig into things. They will need to be team oriented and willing to work with the team following the correct procedures. They need to be willing to listen.
• Team: With this position, we will be a team of 8. Half are part of developing new tools and reports and the other half work on the recurring reporting. They still work together a lot because some of the recurring work is being replaced by tools/dashboards that the development side is building. The team really likes collaborating with each other to complete the work. We have a lot of big projects happening this year and they are high focus for the business. We are shifting the way we provide information to management so that it is more real-time and self-serve.

Responsibilities:

• Creates and analyzes reports to support operations. Ensures correctness of analysis, and reports findings in a concise manner to senior management. Directly responsible for accuracy of data as financial and operational decisions are made based on the data provided. Generates internal and external reports to support management in determining productivity and efficiencies of programs or operational processes. Revises existing reports and develops new reports based on changing methodologies.
• Analyzes reports to ensure accuracy and quality. Tracks and verifies all reporting statistics. Communicates and trains employees and managers on the complex database programs used to generate analytical data. Designs, codes, and maintains complex database programs for the extraction and analysis of data to support financial and operational decisions.

Experience:

• 4 Years Research and analysis experience.

Skills:

• Strong organizational, customer service, communications, and analytical skills. Advanced experience using complex mathematical calculations and understand mathematical and statistical concepts. Knowledge of relevant computer support systems. Ability to train subordinate staff including provide assistance/guidance to staff in design/execution of reporting needs. Proven experience with report writing and technical requirements analysis, data and business process modeling/mapping, and methodology development. Strong understanding of relational database structures, theories, principles, and practices.
• Required Software and Other Tools: Advanced knowledge of Microsoft Office. Knowledge of programming languages across various software platforms, using DB2, SQL, and/or relational databases. Knowledge of tools such as Visual Basic and Macros useful in automating reporting processes. Preferred Skills and Abilities: Computer programming skills. Negotiation or persuasion skills. Knowledge of ICD9/CPT4 coding. Knowledge of the healthcare delivery system. Preferred Software and Other Tools: SAS experience. Work environment: Typical office environment. Some travel between buildings and out of town.

Education:

• Bachelor's degree in Statistics, Computer Science, Mathematics, Business, Healthcare, or other related field. Degree Equivalency: 2-year degree in Computer Science, Business or related field and 2 years of reporting and data analysis work experience.

About US Tech Solutions:

US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Recruiter's detail:

Name: Vivek Kumar

Email:

internal ID: 26-05907

Job Title: Engineering Technician (Machine Shop & Fabrication)

Location: West Columbia, SC

Hire Type: Contract to Hire | Full time

Schedule: Mon-Fri 7a-3:30p

Pay Rate: $27/hr

Benefits: Health, Dental, Vision, 401k, PTO

Position Summary

Sterling is seeking a highly skilled Engineering Technician with strong machining, fabrication, and design experience to join our team. This role will support engineering and production initiatives by designing, fabricating, and modifying components, fixtures, and tooling in a machine shop environment. The ideal candidate is a self-starter with extensive hands-on experience in tool and die making, manual machining, and fabrication, capable of working independently while maintaining a strong commitment to safety and quality.

This role will initially be hired as an Engineering Technician III, with the opportunity for promotion to Engineering Technician IV upon transition to a core employee.

Key Responsibilities

• Design, fabricate, and modify tools, fixtures, and custom components to support engineering and production operations.
• Operate and maintain manual machining equipment, including manual lathes, manual mills, and other machine shop tools.
• Perform tool and die making, precision machining, and fabrication work based on engineering drawings and specifications.
• Utilize 3D modeling software to support design, prototyping, and process improvements.
• Develop and edit CNC programs using MasterCam when required to support machining operations.
• Create and present technical documentation, process updates, and project summaries using PowerPoint and Excel.
• Collaborate with engineering teams to design, troubleshoot, and improve mechanical systems, tooling, and fabrication processes.
• Ensure work is performed independently, safely, and in accordance with machine shop best practices and safety standards.
• Maintain a clean and organized machine shop environment and ensure equipment is properly maintained.

Required Qualifications

• 5+ years of experience in a machine shop, tool and die, fabrication, or precision machining environment.
• Associate’s degree or technical certification in Mechanical Engineering Technology, Machining, Tool & Die, or related field.
• Experience supporting engineering prototyping, R&D, or manufacturing process development.
• Experience working in high-precision or prototype fabrication environments.
• Extensive experience operating manual lathes, manual mills, and other machine shop equipment.
• Strong background in tool and die making and custom fabrication.
• Experience using 3D modeling software for mechanical design or component development.
• Proficiency with MasterCam for CNC programming or machining support.
• Strong working knowledge of Microsoft PowerPoint and Excel.
• Ability to read and interpret engineering drawings, blueprints, and technical specifications.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Title: Engineering Technician (Machine Shop & Fabrication)

Location: West Columbia, SC

Hire Type: Contract to Hire | Full time

Schedule: Mon-Fri 7a-3:30p

Pay Rate: $27/hr

Benefits: Health, Dental, Vision, 401k, PTO

Position Summary

Sterling is seeking a highly skilled Engineering Technician with strong machining, fabrication, and design experience to join our team. This role will support engineering and production initiatives by designing, fabricating, and modifying components, fixtures, and tooling in a machine shop environment. The ideal candidate is a self-starter with extensive hands-on experience in tool and die making, manual machining, and fabrication, capable of working independently while maintaining a strong commitment to safety and quality.

This role will initially be hired as an Engineering Technician III, with the opportunity for promotion to Engineering Technician IV upon transition to a core employee.

Key Responsibilities

• Design, fabricate, and modify tools, fixtures, and custom components to support engineering and production operations.
• Operate and maintain manual machining equipment, including manual lathes, manual mills, and other machine shop tools.
• Perform tool and die making, precision machining, and fabrication work based on engineering drawings and specifications.
• Utilize 3D modeling software to support design, prototyping, and process improvements.
• Develop and edit CNC programs using MasterCam when required to support machining operations.
• Create and present technical documentation, process updates, and project summaries using PowerPoint and Excel.
• Collaborate with engineering teams to design, troubleshoot, and improve mechanical systems, tooling, and fabrication processes.
• Ensure work is performed independently, safely, and in accordance with machine shop best practices and safety standards.
• Maintain a clean and organized machine shop environment and ensure equipment is properly maintained.

Required Qualifications

• 5+ years of experience in a machine shop, tool and die, fabrication, or precision machining environment.
• Associate’s degree or technical certification in Mechanical Engineering Technology, Machining, Tool & Die, or related field.
• Experience supporting engineering prototyping, R&D, or manufacturing process development.
• Experience working in high-precision or prototype fabrication environments.
• Extensive experience operating manual lathes, manual mills, and other machine shop equipment.
• Strong background in tool and die making and custom fabrication.
• Experience using 3D modeling software for mechanical design or component development.
• Proficiency with MasterCam for CNC programming or machining support.
• Strong working knowledge of Microsoft PowerPoint and Excel.
• Ability to read and interpret engineering drawings, blueprints, and technical specifications.
• Proven ability to work independently, troubleshoot problems, and manage projects with minimal supervision.
• Strong commitment to workplace safety and machine shop best practices.

Qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or genetic information.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airlines is excited to offer opportunities for a Numerical Control Tape Laminator Operator to join our Fabrication team in Everett, Washington.

Join our innovative team as a Numerical Control Tape Laminator Operator, where you will independently operate and adjust advanced tape laminator machines, ensuring precise setups and adherence to established shop practices. Your attention to detail will guide you as you prepare materials, verify specifications, and utilize precision measuring instruments to achieve optimal results. You will play a key role in monitoring machine operations, troubleshooting any issues, and performing quality checks to ensure that every part meets stringent standards. Your commitment to safety and proper handling of hazardous materials will contribute to a secure and efficient work environment. If you are passionate about precision manufacturing and thrive in a fast-paced setting, we invite you to be a part of our mission to deliver exceptional aerospace solutions.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Independently operate and adjust numerically controlled Tape Laminator machines according to established shop practices and procedures.

• Prepare for job setup by reviewing production orders, work orders (W/O), and setup documents, ensuring access to blueprints and drawings.

• Verify that the correct materials and tools are issued and free from visible defects before starting work.

• Identify the type of machine setup needed based on drawings and work orders, including flat tape laminating machines and automated fiber placement machines.

• Check machine setups and parts completed by previous operators to ensure safe working conditions and job progress.

• Prepare machines by obtaining materials from storage and performing necessary processes before operation, such as rolling tackifier and laying fiberglass.

• Use precision measuring instruments, such as dial indicators, to align and level the layup table as required.

• Retrieve and download CNC programs to the machine controller from the mainframe server.

• Set machine coordinates and adjust offsets, tool heights, and laser settings using the controller keyboard or pendant.

• Run the machine to lay graphite plies, copper ampe plies, and perform hand trimming and rework as necessary.

• Monitor machine operations for unusual vibrations or sounds, checking gauges and displays for warnings.

• Move finished parts and tools using appropriate material handling equipment as required.

• Handle and dispose of hazardous materials in accordance with safety regulations and using personal protective equipment.

• Perform quality checks after each operation to ensure parts meet specifications and are free from defects.

• Maintain personal and tool certifications, consulting with team leaders and supervisors on process or job-related issues as needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ Years of experience using precision measuring tools.

• 1+ Years of experience with multi-axis Numerical Control (NC) machines.

• 1+ Years of experience obtaining and using information from drawings, documents, machine control data, to set up parts or material on pallets for machining operations.

• 1+ Years of experience working with blueprints, specifications, assembly drawings and standard operating procedures.

• Able to stand and walk throughout work shift (6+ hours) as well as carry and lift up to 25 pounds.

Preferred Qualifications:

• 1+ Years of experience operating 3, 4, or 5 axis NC/CNC machine tools.

• Experience working with and around hazardous materials (while using the proper protective equipment).

Conflict of Interest:

Successful candidates for this job must satisfy the Company's Conflict of Interest (COI) assessment process.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $26.32/hour, with potential to earn up to $56.36/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Mar. 22, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Tube, Duct, and Reservoir Assembler to join our Fabrication team in Algona and Auburn, Washington.

As an Assembler Weld & Duct, you will be at the forefront of our operations, transforming precision-engineered components into vital subassemblies for aircraft systems. Your expertise will ensure that every part is meticulously prepared, fitted, and aligned, contributing to the seamless integration of hydraulic, fuel, and oxygen systems. You will have the opportunity to work with cutting-edge tools and technologies, collaborating with a dedicated team to achieve exceptional results.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Verify kitted parts and assemblies against Work Orders (W/O) and Bills of Material (BOM) to ensure accuracy and quality.

• Obtain necessary engineering drawings for assigned jobs if not included with the order.

• Initiate planning or engineering change requests for pre-planned jobs as required.

• Set up assembly tools according to instructions and ensure correct locators for model configurations.

• Hand fit parts using jigs and tools to ensure proper alignment and fit.

• Prepare detail parts by trimming, sanding, and deburring as necessary to meet specifications.

• Deliver completed details to the appropriate work area for further processing.

• Select and utilize appropriate drills, reamers, and countersinking tools for hole preparation.

• Drill and ream holes in parts and assemblies according to drawing specifications.

• Apply sealants, primers, and adhesives as required by work orders and specifications.

• Handle and dispose of hazardous materials safely, following approved procedures.

• Obtain the correct type and size of fasteners from the roto-bin per specifications.

• Report job handicaps, such as errors in sequencing, parts, materials, and fabrication procedures.

• Measure and cut tubing to close tolerances, and swage tubing as necessary.

• Conduct in-process checks to ensure compliance with quality requirements and specifications and seek assistance from the team leader when needed.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with powered hand tools

• 1+ years of experience working with precision measuring tools

• Computer proficiency including Microsoft Office Suite

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division)

• 1+ years of experience working with detailed work instructions or reading and interpreting blueprints and drawings

• Ability to lift, push and pull up to 35 pounds frequently within an 8 hour shift

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives.

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 30, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Power Plant B to become part of our Join and Installation team in Everett and Kent, Washington.

Join our dynamic team as an Assembler Power Plant B, where your skills will be pivotal in constructing and assembling critical aircraft components. In this essential role, you will utilize production drawings and specifications to accurately install, fit, and align parts for power packs and strut assemblies. Your attention to detail will ensure that each component is meticulously drilled, reamed, and riveted, while your expertise in pre-assembly will streamline the process for wiring harnesses and tubing assemblies. You will operate advanced material handling equipment to efficiently load and unload engines and struts. Your ability to verify dimensions and check for defects will be crucial in maintaining our commitment to excellence. If you are passionate about aviation and thrive in a collaborative environment, we invite you to contribute to our mission of delivering high-quality aircraft systems.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Install, fit, fasten, align, adjust, and connect parts and assemblies to build aircraft power packs and strut assemblies.

• Use production drawings, specifications, and assembly pages to derive measurements and locate points for part marking and layout preparation.

• Perform drilling, reaming, riveting, and soldering necessary for assembly tasks.

• Review work orders and installation plans to determine job priorities and obtain appropriate drawings and production illustrations.

• Obtain and verify kitted detail parts and assemblies, ensuring they are correct and free of defects.

• Pre-assemble components such as wiring harnesses and tubing assemblies using power and hand tools.

• Operate material handling equipment, including overhead cranes and scissor lifts, to load and unload engines and struts.

• Align parts and assemblies to mating surfaces, temporarily securing them in place and checking for proper alignment.

• Attach, seal, and connect parts, assemblies, and wires using the correct fasteners and tools, tightening per specifications.

• Torque fasteners and install safety devices such as lock wires and cotter pins as required by drawings or specifications.

• Seal hydraulic fittings and access doors, applying necessary fluids, primers, and adhesives according to specifications.

• Operate various tools, including pull rivet guns and countersinks, to fasten and torque parts and assemblies.

• Verify close tolerance dimensions using precision measuring tools and check work for defects before inspection.

• Maintain personal and tool certifications, ensuring compliance with safety and operational standards.

• Communicate with team leaders and supervisors regarding job progress, issues, and assistance needed, while consulting with engineering and planning as required.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs. to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Do you meet this requirement?

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience working with mechanical or structures related statements of work; such as construction, aerospace, automotive, maritime or similar industry; this can include education and military.

• 1+ year experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, and specifications.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Ability to lift up to 35 pounds.

• This position requires you to wear eye, hearing, foot, hand, respirator and other personal protective equipment/safety gear at all times.

• Proficiency in reading, writing, and speaking English

Preferred Qualifications:

• 1+ years of experience performing aircraft structural work or equivalate.

• 1+ years of experience using high impact vibratory tools; such as bucking/riveting.

• Enrolled in a Boeing partnered manufacturing related high school or community and technology college academic program

Conflict of Interest: 

• Successful candidates for this position must successfully complete the Company’s Conflict of Interest (COI) assessment process.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

• Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

• This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Safety Sensitive Statement:

• This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing.

Shift Work Statement:

• This position is for a variety of shifts

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $25.00/hour, with potential to earn up to $55.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance:

Pratt & Whitney is working to once again transform the future of flight—designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we’re seeking the people to drive it. So, calling all curious. 

Come ready to explore and you’ll find a place where your talent takes flight—beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we’ll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that’s evolving fast to the future.

At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond?

We have an immediate need for a Production Machinist/Processor C 3rd shift (Onsite)

FUNCTION: Setup and operate one machine tool or process equipment type and operate more than one unrelated machine tool or process equipment types within an assigned area to produce precision turbine engine parts. Perform work where methods, procedures and processes are well developed and the required tooling, gaging and fixturing are provided.

What You Will Do:

Job Description

• Under the direction of leader/supervisor, work from verbal and written instructions, operation sheets, drawings and other pertinent information. Following established methods and procedures, use manual or numerically controlled machine tools such as milling, boring, grinding, turning, broaching and shaping machines to achieve the required dimensional specifications.

• Recognize indications of dull or damaged cutting tools and replace them as needed.

• Perform bench, assembly and surface finishing operations such as deburring, blending, trimming and fitting, using a variety of hand and power tools.

• Follow prescribed methods and procedures to perform drilling, riveting and bonding operations to assemble various details in producing a finished part. Operate part-marking equipment.

• Use a variety of media, dry or liquid, to perform cleaning or part preparation and finishing operations. Operate tumbling, grit blast, shot peen, buffing and polishing equipment, wash machines and dip tanks for part surface conditioning.

• Apply masking as required. Perform applications of anti-gall and polymite coatings utilizing dry bake ovens to cure.

• Utilize a variety of fixed or variable measuring instruments to check dimensions and part features. Operate OpCert and other computer–based systems to retrieve and store information and records.

Refer difficulties to leader or supervisor.

Perform routine servicing throughout assigned area following specified procedures and written instructions, such as operators’

checklist, for upkeep and to assure equipment operates properly.

May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.

Qualifications You Must Have:

• High School Diploma or GED.

• U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.

Qualifications we prefer:

• 1-3 years of machining experience.

Qualifications We Value: In compliance with the collective bargaining agreement, priority consideration is given to candidates who are INTERNAL (and recall) to the Pratt & Whitney IAM Bargaining Unit members of District Lodge 26 and Affiliated Locals 700 and 1746 (Connecticut Operations).

 Pratt & Whitney in East Hartford, CT is a FAA regulated facility and as such under the U.S. Departments of Transportation’s Federal Aviation Administration (FAA). This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40.

Learn More & Apply Now!

Must be a U.S. Citizen. This position may require access to systems/tools that are restricted to individuals who possess US citizenship.

 In addition to transforming the future of flight, we are also transforming how and where we work. We’ve introduced role types to help you understand how you will operate in our blended work environment.

This role is:

Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines.

Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee’s personal responsibility.

As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.

RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act.

Privacy Policy and Terms:

Click on this link to read the Policy and Terms