Do Plumbers Do Hvac Jobs in Usa
1,167 positions found — Page 51
The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems.
POSITION RESPONSIBILITIES:
- Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
- Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
- Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
- Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
- Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Fill holes, and increase the size of metal parts.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
- Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
- Preheat work pieces prior to welding or bending, using torches or heating furnaces.
- Hammer out bulges or bends in metal work pieces.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
- Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
- Set up and use ladders and scaffolding as necessary to complete work.
- Use fire suppression methods in industrial emergencies.
- Detect faulty operation of equipment or defective materials and notify supervisors;
- Direct helpers or apprentices in appropriate tasks;
- Must maintain strict adherence to safety rules and quality;
- Participate in site housekeeping;
- Interact with co-workers in an attentive courteous manner;
- Additional duties as directed by management.
SKILLS & EXPERIENCE/REQUIREMENTS:
- Ability to work independently or as part of a team;
- Experience: 5 years of Field Experience, trade school or apprenticeship;
- Knowledge of materials, methods and tools involved in industrial construction;
- Attention to detail;
- Ability to keep hand and arm steady;
- Be highly focused on customer satisfaction expectations;
- Good documentation and record keeping;
- Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
- Competency in Permit Required Confined Space;
- Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
- Appropriate state certification or license;
- OSHA 10 certification.
PHYSICAL DEMANDS & WORK ENVIRONMENT:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS:
Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs.
WORK ENVIRONMENT:
- Industrial manufacturing facilities Power generating facilities
- Chemical manufacturing Healthcare & Institutional
- Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
I'm going places. I want a satisfying career with good benefits and great opportunities for advancement. I have a lot to offer and I want to grow.
The Job for Me Get a job that inspires your best and moves you forward. Choose your hours. Pursue your education. Build your skills and be yourself.
The Team for Me Our people want to say YES to working with energy and purpose, finding new talent, providing coaching and direction, honing their leadership skills, and helping to run a business that serves up delicious food and feel-good moments. Does this sound like you? You'll fit right in.
The Company for Me From here, you can go further than you thought possible. Reach your goals and build your future with college tuition assistance, valuable job training, and retirement benefits.
Let's talk. Make your move.
Requirements:
The Maintenance Person assists management in achieving and maintaining outstanding interior and exterior restaurant cleanliness and maintaining restaurant equipment. As a member of the Maintenance Team, your restaurant will support you with the tools and training needed to succeed.
The Maintenance Person's responsibilities may include, but are not limited to:
- Filtering oil fryers daily
- Maintaining outside grounds
- Clean equipment, inside and outside windows, stock rooms and restrooms
- Unload delivery truck 2 times a week
- Take out and empty trash compactor
- Change light bulbs
- Clean HVAC/Exhaust units and roof of debris
Additional Info:
Along with competitive pay, a Maintenance Person at a McDonald's restaurant is eligible for incredible benefits including:
- 1 Week paid vacation after 1 year employment
- Education through Archways to Opportunity including opportunities to earn a High School degree, college tuition assistance and English classes as a second language
- Medical, dental and vision coverage
- Short- and Long-Term Disability, life and accident insurance
- Service awards
This job posting contains some information about what it is like to work in a McDonald's restaurant, but it is not a complete job description. People who work in a McDonald's restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job.
By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald's USA. I understand that this franchisee is a separate company and a separate employer from McDonald's USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald's USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices.
This job posting is for a position in a restaurant owned and operated by an independent franchisee and not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. If you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired.
Responsibilities:
Follow company safety policies Demonstrate proper use of personal protective equipment
Know and follow the HAZCOM program
Present a positive image to customers, co-workers, and others on the job
Keep work area clean
Be willing to learn and take direction
Attend training to improve knowledge of HVAC
Possess general knowledge of hand tools and their use
Be able to identify material for piping, copper, and PVC fittings
Understand proper handling procedures for chilled water piping systems
Understand general electrical safety practices
Qualifications:
High School Diploma or Equivalent
Work Environment:
Physical activities of standing, balancing, climbing stairs and ladders. Must be comfortable working from heights (over 20 feet is common). Walking and lifting weight of twenty (20) pounds or more are required in the daily performance of job.
Use of upper extremities required for forward and overhead reaching, pushing, pulling and material handling.
Use of torso and lower extremities required for kneeling, crawling, stooping, twisting and squatting.
recblid 1hbdmljr0c0cdnsf2oit0s4q7k8zcs
Dave & Buster's is different from everywhere else. No two days are ever the same. Time will fly by serving hundreds of people with flexible schedules you can accommodate school or other jobs. Plus, your co-workers are awesome!
Dave & Buster's offers an attractive benefits package for many positions, including medical, dental, vision, 401K, FREE GAMES and more.
The maintenance position is vital to the overall cleanliness and first impression of the Guests. Our maintenance staff is responsible for cleaning, repairing, and maintaining the interior and exterior of our building.
Nitty Gritty Details- Delivers an unparalleled guest experience through the best combination of food, drinks and games in an ideal environment for celebrating all out fun.
- Keeps immediate supervisor promptly and fully informed of all problems or unusual matters of significance and takes prompt corrective action where necessary or suggests alternative courses of action.
- Safely and correctly operates all equipment.
- Uses all chemicals properly in the correct quantities for safety and cost control.
- Adheres to all company safety and sanitation policies and procedures.
- Controls costs by not overstocking or disposing of unused materials.
- Clean and maintain kitchen and dish areas, floors, walls and drains.
- Responsible for maintenance storage areas, cleanliness and stocking.
- Cleans and maintains all windows, lamps, mirrors and light fixtures.
- Cleans and maintains wood floors and walls, tile and carpets.
- Maintains cleanliness and sanitation of all restroom areas, including restocking of supplies.
- Dusts all wood and fixtures.
- Polish all brass plates, rails and hardware.
- Cleans and maintains all ceiling fans, air intakes and HVAC air vents.
- Cleans and maintains all mats.
- Empties trash and cleans and maintains trash cans.
- Cleans and maintains back dock area.
- Assists other Team Members as needed or when business needs dictate.
- Maintains a favorable working relationship with all other company Team Members to foster and promote a cooperative and harmonious working climate that will be conducive to maximum Team Member morale, productivity and efficiency/effectiveness.
- Must be friendly and able to smile a lot while working days, nights, and/or weekends as required.
- Previous maintenance experience at a hotel or restaurant is preferred, but not required.
- Must demonstrate ability to early communicate with Guests and other Team Members.
- Must be disciplined and self-motivated.
- Is dressed in accordance with dress guidelines, looking neat, clean and professional at all times.
- Must be at least 18 years of age.
The physical demands described here are representative of those that must be met by a Team Member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the Team Member will regularly be required to:
- Work days, nights and/or weekends as required.
- Work in noisy, fast paced environment with distracting conditions.
- Read and write handwritten notes.
- Lift and carry up to 30 pounds.
- Move about facility and stand for long periods of time.
- Walk or stand 100% of shift.
- Reach, bend, stoop, mop, sweep and wipe frequently.
The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified in this position.
As an equal opportunity employer, Dave & Buster's is dedicated to our policy of nondiscrimination in all aspects of employment, and we comply with all Federal, State and Local laws regarding nondiscrimination.
Dave and Buster's is proud to be an E-Verify Employer where required by law.
Compensation is from $10.45 - $14.25 per hour.
Free Uniform
Free Meal Daily
Tuition Assistance Available
Flexible Scheduling
Pay Weekly
Full Time Employees, Paid Vacation After One Year
This job posting is for a position in a restaurant owned and operated by an independent franchisee and not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. If you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired.
McDonald's Works for Me.
I'm going places. I want a satisfying career with good benefits and great opportunities for advancement. I have a lot to offer and I want to grow.
The Job for Me Get a job that inspires your best and moves you forward. Choose your hours. Pursue your education. Build your skills and be yourself.
The Team for Me Our people want to say YES to working with energy and purpose, finding new talent, providing coaching and direction, honing their leadership skills, and helping to run a business that serves up delicious food and feel-good moments. Does this sound like you? You'll fit right in.
The Company for Me From here, you can go further than you thought possible. Reach your goals and build your future with college tuition assistance, valuable job training, and retirement benefits.
Let's talk. Make your move.
Requirements:
The Maintenance Person assists management in achieving and maintaining outstanding interior and exterior restaurant cleanliness and maintaining restaurant equipment. As a member of the Maintenance Team, your restaurant will support you with the tools and training needed to succeed.
The Maintenance Person's responsibilities may include, but are not limited to:
Filtering oil fryers daily
Maintaining outside grounds
Clean equipment, inside and outside windows, stock rooms and restrooms
Unload delivery truck 2 times a week
Take out and empty trash compactor
Change light bulbs
Clean HVAC/Exhaust units and roof of debris
This job posting contains some information about what it is like to work in a McDonald's restaurant, but it is not a complete job description. People who work in a McDonald's restaurant perform a number of different tasks every day, and this posting does not list all of the essential functions of this job.
By applying to this position, I understand that I am applying to work at a restaurant that is owned and operated by an independent franchisee, not McDonald's USA. I understand that this franchisee is a separate company and a separate employer from McDonald's USA. Any information I provide in this application will be submitted only to the independent franchisee, who is the only company responsible for employment matters at this restaurant. I recognize that the independent franchisee alone will make all decisions concerning employment matters, including hiring, firing, discipline, supervision, staffing and scheduling. By applying for a job at a franchisee operated restaurant, I understand that the information I provide will be forwarded to the franchisee organization in order for that organization to reach out to me and process and evaluate my application. I acknowledge that McDonald's USA will not receive a copy of my employment application and will have no involvement in any employment decisions regarding me, including whether I receive an interview or whether I am hired to work for the franchisee. I understand that I need to contact the franchise organization for information about its privacy practices.
Enforce company safety policies
Issue, receive, and store hand tools and equipment
Maintain inventory of all tools and order new equipment as needed
Keep records of tools issued to employees
Report damaged, worn out, or missing equipment
Use computer to enter and track tool transactions
Clean, oil, and perform minor repairs on tools or equipment
Coordinate with field employees to ensure timely delivery of tools
Keep work area clean and organized
Maintain high quality and productivity standards
Assist other departments as needed based on workload
High school diploma or equivalent
Valid Florida driver's license
In-depth knowledge of duct fabrication and installation systems
Understanding of HVAC systems and related supporting utilities
Ability to work independently without supervision
Strong leadership and employee management skills
Physical tasks include standing, balancing, climbing stairs and ladders
Daily walking and lifting of 50 pounds or more
Use of upper extremities for forward and overhead reaching, pushing, pulling, and handling materials
Use of torso and lower extremities for kneeling, crawling, stooping, twisting, and squatting
recblid e3h19h0lqitabul2wvxcqa43twp7bu
McDonald's company-owned and independent Owner-Operator restaurants are staffed by great people, and right now we're looking for more of them. People with lots to offer. People like you. If you're interested (and we sure hope you are), let's get together. Apply today! Pay based on experience and availability. ($15 or more).
The Maintenance Person's responsibilities may include, but are not limited to:
- Filtering oil fryers daily
- Maintaining outside grounds
- Clean equipment, inside and outside windows, stock rooms and restrooms
- Unload delivery truck 2 times a week
- Take out and empty trash
- Change light bulbs
- Clean HVAC/Exhaust units and roof of debris
- Other miscellaneous cleaning
Hours are 4:00 am- 12 pm 5 days a week (includes weekends).
We Offer
- Premium pay for the right person
- Education assistance up to $2500 a year.
- Free meals while working
- Free uniforms.
- Advancement opportunity
This job posting is for a position in a restaurant owned and operated by an independent franchisee and not McDonald's USA. This franchisee owns a license to use McDonald's logos and food products, for example, when running the restaurant. However, this franchisee is a separate company and a separate employer from McDonald's USA. If you are hired for the job described in this posting, the franchisee will be your employer, not McDonald's USA. Only the franchisee is responsible for employment matters at the restaurant, including hiring, firing, discipline, supervisions, staffing, and scheduling employees. McDonald's USA has no control over employment matters at the restaurant. McDonald's USA will not receive a copy of your employment application and it will have no involvement in any employment decisions, including whether you receive an interview for the job or whether you are hired.
The Pipe Welder will participate in the installation or maintenance and inspection of HVAC, Utility and Process piping systems.
POSITION RESPONSIBILITIES:
- Regular attendance at assigned location; may include the A/Z fabrication facility or other project sites;
- Works on systems that include Heating Hot Water, Chilled Water, Steam, Condensate, Compressed Air, Process Fluids, Chemical, Fuel Oil, Gasses, and other related systems;
- Works with materials that include carbon steel, stainless steel, plastics, fiberglass, copper, (brazed, soft soldered and pro-press);
- Clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required configurations and positions for welding.
- Remove rough spots from work pieces, using portable grinders, hand files, or scrapers.
- Chip or grind off excess weld, slag, or spatter, using hand scrapers or power chippers, portable grinders, or arc-cutting equipment.
- Weld pipe and components in flat, vertical, or overhead positions using open root butt weld, socket weld and/or fillet weld.
- Operate manual or semi-automatic welding equipment to fuse metal segments, using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding.
- Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment.
- Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits.
- Examine work pieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications.
- Prepare all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreignmatter.
- Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material.
- Select and install torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals.
- Fill holes, and increase the size of metal parts.
- Detect faulty operation of equipment or defective materials and notify supervisors.
- Determine required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques.
- Connect and turn regulator valves to activate and adjust gas flow and pressure so that desired flames are obtained.
- Lay out, position, align, and secure parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers.
- Repair products by dismantling, straightening, reshaping, and reassembling parts, using cutting torches, straightening presses, and hand tools.
- Clean or degrease parts, using wire brushes, portable grinders, or chemical baths.
- Mark or tag material with proper job number, piece marks, and other identifying marks as required.
- Position and secure work pieces, using hoists, cranes, wire, and banding machines or hand tools.
- Analyze engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations.
- Dismantle metal assemblies or cut scrap metal, using thermal-cutting equipment such as flame-cutting torches or plasma-arc equipment.
- Preheat work pieces prior to welding or bending, using torches or heating furnaces.
- Hammer out bulges or bends in metal work pieces.
- Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
- Check grooves, angles, or gap allowances, using micrometers, calipers, and precision measuring instruments.
- Cut, contour, and bevel metal plates and structural shapes to dimensions as specified by blueprints, layouts, work orders, and templates, using powered saws, hand shears, or chipping knives.
- Estimate consumable materials needed for production and manufacturing and maintain required stocks of materials.
- Set up and use ladders and scaffolding as necessary to complete work.
- Use fire suppression methods in industrial emergencies.
- Detect faulty operation of equipment or defective materials and notify supervisors;
- Direct helpers or apprentices in appropriate tasks;
- Must maintain strict adherence to safety rules and quality;
- Participate in site housekeeping;
- Interact with co-workers in an attentive courteous manner;
- Additional duties as directed by management.
SKILLS & EXPERIENCE/REQUIREMENTS:
- Ability to work independently or as part of a team;
- Experience: 5 years of Field Experience, trade school or apprenticeship;
- Knowledge of materials, methods and tools involved in industrial construction;
- Attention to detail;
- Ability to keep hand and arm steady;
- Be highly focused on customer satisfaction expectations;
- Good documentation and record keeping;
- Preparation of miscellaneous paperwork including time sheets, daily reports and material requests;
- Competency in Permit Required Confined Space;
- Understanding of and strict adherence to daily Job Hazard Analysis (JHA);
- Appropriate state certification or license;
- OSHA 10 certification.
PHYSICAL DEMANDS & WORK ENVIRONMENT:
The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
PHYSICAL DEMANDS:
Ability to perform tasks in all aspects of construction sites; ability to climb ladders and crawl as needed; ability to work from aerial lifts; ability to lift and manipulate objects of up to 50 lbs.
WORK ENVIRONMENT:
- Industrial manufacturing facilities Power generating facilities
- Chemical manufacturing Healthcare & Institutional
- Pharmaceutical facilities including GMP - Aseptic and non-Aseptic Areas and Non GMP Areas Commercial and offices spaces
Since 1953, Ferguson has been a source of quality supplies for a variety of industries. Together We Build Better Infrastructure, Better Homes and Better Businesses. We exist to make our customers' complex projects simple, successful, and sustainable. We proactively solve problems, adapt and grow to continuously serve our customers, communities and each other. Ferguson, a Fortune 500 company, is proud to provide best-in-class products, service and capabilities across the following industries: Commercial/Mechanical, Facilities Supply, Fire and Fabrication, HVAC, Industrial, Residential Trade, Residential Building and Remodel, Waterworks and Residential Digital Commerce. Ferguson has approximately 36,000 associates across 1,700 locations. Ferguson is a community of proud associates who operate with the shared purpose of building something meaningful. You will build a career that you are proud of, at a company you can believe in.
We realize that our greatest assets are our best-in-class associates, which is why we're dedicated to offering limitless opportunities for growth and advancement. We want to help you build a long-lasting career with Ferguson. Together, we can continue to lead the industry and help build our nation's infrastructure from the ground up. Join our team today.
Ferguson is currently seeking the right individual to fill an immediate need for an Installation Coordinator.
Responsibilities- Proactively develop and maintain relationships with an assigned customer base, including key accounts and ensuring their satisfaction with our products and services
- Collaborate with sales teams to understand the customer requirements
- Review and modify work orders for accuracy of scope, clarity, required dates, customer contact information and product availability
- Contact customer for scheduling of events: pre-site, delivery and installation
- Update Installation Calendar with pertinent job condition
- Track and record number of installations by product type
- Receive pre-site notes, exit checklist, change orders, pictures and invoices for storage, and processing customer advocacy; Provide formal and final pricing to customer for services requested; Point of contact for questions, concerns, and/or complaints
- Write credit memos and sales orders as needed for returns and rescheduled appointments
- Prior installation coordinating experience is strongly preferred
- Ability to apply expert level product and installation knowledge
- Ability to organize and prioritize work and communicate effectively
- Ability to develop and maintain positive relationship with both internal and external customers
- Familiar with Microsoft Office software (Outlook, Word, Excel, PowerPoint, etc.)
At Ferguson, we care for each other. We value our well-being just as much as our hard work. We are committed to a holistic approach towards benefits plans and programs that support the mental, physical and financial well-being of our associates. Our competitive offering not only includes benefits like health, dental, vision, paid time off, life insurance and a 401(k) with a company match, but our associates also enjoy additional meaningful and inclusive enhancements that are adaptable to their diverse situations and needs, including mental health coverage, gender affirming and family building benefits, paid parental leave, associate discounts, community involvement opportunities and more!
Pay Range: $15.00 - $25.39
Estimated Ranges displayed are Monthly for Salaried roles OR Hourly for all other roles.
This role is Bonus or Incentive Plan eligible.
Ferguson complies with all wage regulations. The starting wage may be higher in certain locations based on local or state wage requirements.
The Company is an equal opportunity employer as well as a government contractor that shall abide by the requirements of 41 CFR 60-300.5(a), which prohibits discrimination against qualified protected Veterans and the requirements of 41 CFR 60-741.5(A), which prohibits discrimination against qualified individuals on the basis of disability. Ferguson Enterprises, LLC. is an equal employment employer F/M/Disability/Vet/Sexual Orientation/Gender Identity.
Position Description
Immediate opening for a SOLO Class A CDL Truck Driver and we want the right Trucker to join us at Ryder in Syracuse, NY!
might be wondering what your paycheck will look like.
$1318 per week, or more - And it gets better
+ Driver Positions Pay Weekly
+ Hourly Pay: $32.96 Per Hour
+ Hours Per Week: 40 + hours per week
+ Paid Training
+ Schedule: Monday - Friday
+ Start Time: 6:30 AM
Apply Here with Ryder Today
Stop applying to companies that don't have your best interest in mind. At Ryder, we promise transparency and want you to have the actual pay and route details upfront making your decision to join our team easy.
+ Deliver SOLO?To: NY, PA, NJ, CT
+ Route: Home Daily
+ 26' Straight Truck and 48' and 53' Dry Van
+ Equipment: Lift Gate, Pallet Jack, Hand Dolly
+ Freight: Touch - HVAC Equipment
+ Endorsement: Hazmat required
Trucks are 36 months or newer, include 24/7 Roadside Maintenance and Company Drivers fuel up the trucks at over 800 Maintenance Facilities Nationwide.
We have all the benefits other?carriers?do?without the wait:
+ UNIFORMS, CELL PHONE AND BOOT ALLOWANCE PROVIDED
+ Paid Personal Time Off Starts at Day 1 - 80 hours accrued in First Year
+ DO NOT LOSE Paid Personal Time Policy - We encourage you to use Vacation Time earned. If you decide not to use it - we pay you the remaining balance at your hourly pay rate.
+ Medical, Dental, Vision Start at 30 Days
+ We love our Ryder babies and offer 12 weeks of PAID Maternity Leave for qualifying employees (eligibility requirements, including work tenure, apply)
+ Immediate 401k rollover and contributions with company match at one year
+ Quality Employee Discounts that actually save you Money on Tools, Cars, Hotels Worldwide, Electronics/Appliances, Cell Phones, Travel and more
+ Ryder Drivers are the Captain of the Ship?- OUR DRIVERS make decisions to keep yourself and others safe and we protect your job when you do
Click here to see all Ryder Driving Opportunities: will buy your truck if you're looking to switch from Owner Operator to a Company Employee Driver, we will help make the switch even easier.
We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday
Let Ryder pay you more and Refer a Driver. We pay Unlimited Bonuses for Hired Drivers.
EEO/AA/Female/Minority/Disabled/Veteran
Requirements
+ Minimum 21 years of age
+ Pass a Ryder Drug Test
+ Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
+ Pass a DOT physical
+ Pass a Ryder road test
+ Provide appropriate CDL and endorsements for the position
+ Must have Class A verifiable experience in a tractor trailer or comparable vehicle:
+ 9 months experience within the past 3 years, OR
+ 2 years' experience within the last 5 years, OR
+ 5 years' experience within the last 10 years
+ Ability to follow written and/or oral instructions
+ Ability to read, interpret and apply laws, rules, regulations policies and/or procedures
Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.
Responsibilities
+ Ensuring compliance with applicable federal and/or state laws, regulations, and/or agency rules, standards and guidelines
+ Detecting and eliminating or minimizing safety hazards Maintaining accurate records and logs
+ Loading/Unloading freight or assisting in the loading/unloading of freight if required by customer
+ Performs other duties as assigned
_Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability._
Posted Date _2 weeks ago_ _(1/2/2026 2:28 PM)_
_Requisition ID_ _2
_Primary State/Province_ _NY_
_Primary City_ _EAST SYRACUSE_
_Location (Posting Location) : Postal Code_ _13057_
_Category_ _Drivers Home Daily_
_Employment Type_ _Regular-Full time_
_Travel Requirements_ _Driver_
_Position Code_ _1000385_
