Diversified Remote Remote Jobs in Usa
766 positions found — Page 41
Manager Practice III-Primary Rural Health (Hiring Immediately)
Salary not disclosed
Description
Summary:
This position is responsible for the operation of physician practices usually consisting of more than 4 providers, more than 10 FTEs or more than two sites. The position is responsible for, but not limited to, managing subordinate personnel, preparing clinic(s) budget, ensuring data accuracy, preparing financial analyses, handling complex customer service issues and maintaining provider/staff communications.
Responsibilities:
• Establishes/implements goals, objectives, policies, procedures and systems for the assigned administrative areas.
• Assists with developing and implementing annual operational plan and budget.
• Selects, trains, orients and supervises clinic personnel in accordance with established policies and procedures. Responsible for work assignments and daily operations. Manages personnel for multiple practices, including training relief employees.
• Evaluates performances and recommends merit increases, promotions and disciplinary actions in a timely manner. Interviews and recommends hiring and termination of staff in accordance with approved policies.
• Resolves problems in administrative areas and ensures compliance with regulations and standards.
• Helps fiscal management and other administrative staff in implementing cost effective policies and procedures for all operational areas including bookkeeping, billing, insurance, fee schedules, credit/collections, purchasing, data processing and space planning.
• Works in conjunction with Regional Director and corporate Marketing Department in practice development.
• Ensures the effective implementation of job descriptions, personnel policies and payroll practices.
• Monitors and controls clinic expenditures within budget. Identifies and implements cost reduction opportunities.
• Serves as liaison between clinic and external agencies.
• Works with staff and providers to ensure quality patient care and services are provided. Maintain effective communication with providers and staff; conducts monthly meetings with providers and staff. Create a positive workplace.
• Gathers and reports monthly and annual data for fiscal, statistical and planning purposes. Develops and implements revenue enhancement strategies for existing practice(s).
• Participates in professional development activities to keep current with health care trends and practices.
• May be responsible for assuring all appropriate licensure, certifications and/or accreditations are secured according to policy.
• Follows the CHRISTUS Physician Group guidelines related to the Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI).
• Maintains strict confidentiality.
• Uses oral and written communication skills to effectively convey ideas in a clear, positive manner that is consistent with the CHRISTUS Mission.
• Maintains established CHRISTUS Physician Group policies, procedures, objectives, quality assurance, safety, environmental and infection control.
• Implements job responsibilities in a manner that is consistent with the CHRISTUS Mission and Code of Ethics and supportive of CHRISTUS Physician Group’s cultural diversity objectives.
• Supports and adheres to CPG Service Guarantee.
• Collaborates effectively with physicians, administrators, patients, families, other departments, and the community to provide quality patient care and enhance patient outcomes.
• Ensures assessment of competency of all associates is completed as a part of the orientation program and on an ongoing basis.
Identifies plans, develops and/or arranges for programs to meet the educational/skills needs of the associates upon hiring and on an ongoing basis.
• On an annual basis, contributes to the development of operating and capital budgets to meet the needs of the clinics.
• Reviews financial and productivity management reports and takes appropriate actions.
• Evaluate clinic production and revises procedures or devises new forms to improve efficiency of workflow.
• Supervises the clinical and non-clinical areas to ensure timely and efficient management.
• Coordinates with Providers as needed to ensure projects and assignments are coordinated as necessary by the Administrative staff.
• Demonstrates adherence to the Mission and CORE values of the CHRISTUS Health System.
• Performs other related work as required.
Requirements:
- Bachelor degree in Healthcare, Business Administration or related field is required. Masters preferred.
- 10 years of management experience as a substitute in lieu of education.
- 2-12 years of experience in diversified positions within a medical practice with at least one year in a supervisory position.
- CMOM is preferred
- Demonstrated leadership skills (decision making, problem solving, delegation, prioritizing) and supervisory experience is required.
- Competent in health care administration, clinic philosophy and policies and operating procedures is required.
- Effective communication and prioritization of provider issues.
- Competent in financial reimbursement, billing and collections, CPT, ICD9 and HCPCS coding and medical group operations, as well as managed care concepts.
- Ability to recognize and communicate variances in key practice indicators.
- Must be computer literate and have strong organizational skills.
Work Type:
Full Time
permanent
Manager Practice II-General Surgery (Hiring Immediately)
🏢 Christus Health
Salary not disclosed
Description
Summary:
This position is responsible for the operation of provider practices usually consisting of 2-4 providers with 6-10 FTEs or at two different sites. The position is responsible for, but not limited to, managing subordinate personnel, preparing clinic(s) budget, ensuring data accuracy, preparing financial analyses, handling complex customer service issues and maintaining provider/staff communications.
Responsibilities:
~ Establishes/implements goals, objectives, policies, procedures and systems for the assigned administrative areas.
~ Assists with developing and implementing annual operational plan and budget.
~ Selects, trains, orients and supervises clinic personnel in accordance with established policies and procedures. Responsible for work assignments and daily operations. Manages personnel for multiple practices, including training relief employees.
~ Evaluates performances and recommends merit increases, promotions and disciplinary actions in a timely manner. Interviews and recommends hiring and termination of staff in accordance with approved policies.
~ Resolves problems in administrative areas and ensures compliance with regulations and standards.
~ Helps fiscal management and other administrative staff in implementing cost effective policies and procedures for all operational areas including bookkeeping, billing, insurance, fee schedules, credit/collections, purchasing, data processing and space planning.
~ Works in conjunction with Regional Director and corporate Marketing Department in practice development.
~Ensures the effective implementation of job descriptions, personnel policies and payroll practices.
~Monitors and controls clinic expenditures within budget. Identifies and implements cost reduction opportunities.
~Serves as liaison between clinic and external agencies.
~Works with staff and providers to ensure quality patient care and services are provided. Maintain effective communication with providers and staff; conducts monthly meetings with providers and staff. Create a positive workplace.
~Gathers and reports monthly and annual data for fiscal, statistical and planning purposes. Develops and implements revenue enhancement strategies for existing practice(s).
~Participates in professional development activities to keep current with health care trends and practices.
~May be responsible for assuring all appropriate licensure, certifications and/or accreditations are secured according to policy.
~Follows the CHRISTUS Health System guidelines related to the Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI).
~Maintains strict confidentiality.
~Uses oral and written communication skills to effectively convey ideas in a clear, positive manner that is consistent with the CHRISTUS Mission.
~Maintains established CHRISTUS Health System policies, procedures, objectives, quality assurance, safety, environmental and infection control.
~Implements job responsibilities in a manner that is consistent with the CHRISTUS Mission and Code of Ethics and supportive of CHRISTUS Health's cultural diversity objectives.
~Supports and adheres to CHRISTUS Health System Service Guarantee.
~Collaborates effectively with physicians, administrators, patients, families, other departments, and the community to provide quality patient care and enhance patient outcomes.
~Ensures assessment of competency of all associates is completed as a part of the orientation program and on an ongoing basis.
~Identifies plans, develops and/or arranges for programs to meet the educational/skills needs of the associates upon hiring and on an ongoing basis.
~On an annual basis, contributes to the development of operating and capital budgets to meet the needs of the clinics.
~Reviews financial and productivity management reports and takes appropriate actions.
~Evaluate clinic production and revises procedures or devises new forms to improve efficiency of workflow.
~Supervises the clinical and non-clinical areas to ensure timely and efficient management.
~Coordinates with Providers as needed to ensure projects and assignments are coordinated as necessary by the Administrative staff.
~Demonstrates adherence to the Mission and CORE values of the CHRISTUS Health System.
~Performs other related work as required.
Requirements:
Education/Skills
~ Bachelor's degree in Healthcare, Business Administration or related field is required. Master’s is preferred.
~4 years of management experience as a substitute in lieu of education.
Experience
~4-8 years of experience in diversified positions within a medical practice with at least one year in a supervisory position.
~ Demonstrated leadership skills (decision making, problem solving, delegation, prioritizing) and supervisory experience is required.
~ Competent in health care administration, clinic philosophy and policies and operating procedures is required.
~ Effective communication and prioritization of provider issues.
~ Competent in financial reimbursement, billing and collections, CPT, ICD9 and HCPCS coding and medical group operations, as well as managed care concepts.
~ Ability to recognize and communicate variances in key practice indicators.
~ Must be computer literate and have strong organizational skills.
Licenses, Registrations, or Certifications
~ CMOM is highly preferred
Work Type:
Full Time
Summary:
This position is responsible for the operation of provider practices usually consisting of 2-4 providers with 6-10 FTEs or at two different sites. The position is responsible for, but not limited to, managing subordinate personnel, preparing clinic(s) budget, ensuring data accuracy, preparing financial analyses, handling complex customer service issues and maintaining provider/staff communications.
Responsibilities:
~ Establishes/implements goals, objectives, policies, procedures and systems for the assigned administrative areas.
~ Assists with developing and implementing annual operational plan and budget.
~ Selects, trains, orients and supervises clinic personnel in accordance with established policies and procedures. Responsible for work assignments and daily operations. Manages personnel for multiple practices, including training relief employees.
~ Evaluates performances and recommends merit increases, promotions and disciplinary actions in a timely manner. Interviews and recommends hiring and termination of staff in accordance with approved policies.
~ Resolves problems in administrative areas and ensures compliance with regulations and standards.
~ Helps fiscal management and other administrative staff in implementing cost effective policies and procedures for all operational areas including bookkeeping, billing, insurance, fee schedules, credit/collections, purchasing, data processing and space planning.
~ Works in conjunction with Regional Director and corporate Marketing Department in practice development.
~Ensures the effective implementation of job descriptions, personnel policies and payroll practices.
~Monitors and controls clinic expenditures within budget. Identifies and implements cost reduction opportunities.
~Serves as liaison between clinic and external agencies.
~Works with staff and providers to ensure quality patient care and services are provided. Maintain effective communication with providers and staff; conducts monthly meetings with providers and staff. Create a positive workplace.
~Gathers and reports monthly and annual data for fiscal, statistical and planning purposes. Develops and implements revenue enhancement strategies for existing practice(s).
~Participates in professional development activities to keep current with health care trends and practices.
~May be responsible for assuring all appropriate licensure, certifications and/or accreditations are secured according to policy.
~Follows the CHRISTUS Health System guidelines related to the Health Insurance Portability and Accountability Act (HIPAA), designed to prevent or detect unauthorized disclosure of Protected Health Information (PHI).
~Maintains strict confidentiality.
~Uses oral and written communication skills to effectively convey ideas in a clear, positive manner that is consistent with the CHRISTUS Mission.
~Maintains established CHRISTUS Health System policies, procedures, objectives, quality assurance, safety, environmental and infection control.
~Implements job responsibilities in a manner that is consistent with the CHRISTUS Mission and Code of Ethics and supportive of CHRISTUS Health's cultural diversity objectives.
~Supports and adheres to CHRISTUS Health System Service Guarantee.
~Collaborates effectively with physicians, administrators, patients, families, other departments, and the community to provide quality patient care and enhance patient outcomes.
~Ensures assessment of competency of all associates is completed as a part of the orientation program and on an ongoing basis.
~Identifies plans, develops and/or arranges for programs to meet the educational/skills needs of the associates upon hiring and on an ongoing basis.
~On an annual basis, contributes to the development of operating and capital budgets to meet the needs of the clinics.
~Reviews financial and productivity management reports and takes appropriate actions.
~Evaluate clinic production and revises procedures or devises new forms to improve efficiency of workflow.
~Supervises the clinical and non-clinical areas to ensure timely and efficient management.
~Coordinates with Providers as needed to ensure projects and assignments are coordinated as necessary by the Administrative staff.
~Demonstrates adherence to the Mission and CORE values of the CHRISTUS Health System.
~Performs other related work as required.
Requirements:
Education/Skills
~ Bachelor's degree in Healthcare, Business Administration or related field is required. Master’s is preferred.
~4 years of management experience as a substitute in lieu of education.
Experience
~4-8 years of experience in diversified positions within a medical practice with at least one year in a supervisory position.
~ Demonstrated leadership skills (decision making, problem solving, delegation, prioritizing) and supervisory experience is required.
~ Competent in health care administration, clinic philosophy and policies and operating procedures is required.
~ Effective communication and prioritization of provider issues.
~ Competent in financial reimbursement, billing and collections, CPT, ICD9 and HCPCS coding and medical group operations, as well as managed care concepts.
~ Ability to recognize and communicate variances in key practice indicators.
~ Must be computer literate and have strong organizational skills.
Licenses, Registrations, or Certifications
~ CMOM is highly preferred
Work Type:
Full Time
permanent
N
Maintenance II - 2nd Shift
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Follow company and OSHA safety procedures Attend safety meetings and participate in safety program Maintain industrial machinery and equipment- daily inspections, reporting defects or needed repairs to supervisor Moves, assembles, installs, or dismantles machinery Operate forklift and skid steer, manlift mobile crane, and overhead hoist Change bearings, motors, gearboxes, conveyor belts, sprockets, drive chains, and hydraulic hoses.
Minor welding and fabricating Visual inspection of equipment, identifying repairs and assist with repairs General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures Willing to cross-train and assist other teammates as needed.
Other duties as assigned by your manager.
Minimum Requirements: High school diploma or GED required 2 years maintenance experience basic torching and welding skills Strong written and verbal communication skills.
Strong organizational skills with attention to details.
Excellent customer service skills, ability to be flexible and display a positive attitude in a fast-paced environment.
Willing to work Monday to Friday 3:30pm – 12:00am and Saturdays as required Willing to work outside in all weather conditions Basic math and computer skills Must wear all necessary PPE while working or while in the yard.
Willing to learn, be adaptable and be self-motivated.
Preferences: 1.
Hydraulic systems experience and interpreting diagrams/blueprints or willingness to learn these skills.
2.
Bilingual preferred- Spanish Complete work history is required to be considered for this position.
Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held.
Any gap in work history must be reflected and include the dates.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Follow company and OSHA safety procedures Attend safety meetings and participate in safety program Maintain industrial machinery and equipment- daily inspections, reporting defects or needed repairs to supervisor Moves, assembles, installs, or dismantles machinery Operate forklift and skid steer, manlift mobile crane, and overhead hoist Change bearings, motors, gearboxes, conveyor belts, sprockets, drive chains, and hydraulic hoses.
Minor welding and fabricating Visual inspection of equipment, identifying repairs and assist with repairs General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures Willing to cross-train and assist other teammates as needed.
Other duties as assigned by your manager.
Minimum Requirements: High school diploma or GED required 2 years maintenance experience basic torching and welding skills Strong written and verbal communication skills.
Strong organizational skills with attention to details.
Excellent customer service skills, ability to be flexible and display a positive attitude in a fast-paced environment.
Willing to work Monday to Friday 3:30pm – 12:00am and Saturdays as required Willing to work outside in all weather conditions Basic math and computer skills Must wear all necessary PPE while working or while in the yard.
Willing to learn, be adaptable and be self-motivated.
Preferences: 1.
Hydraulic systems experience and interpreting diagrams/blueprints or willingness to learn these skills.
2.
Bilingual preferred- Spanish Complete work history is required to be considered for this position.
Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held.
Any gap in work history must be reflected and include the dates.
Not Specified
N
Electrical Technician
🏢 Nucor Corporation
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: This position includes but is not limited to: • The successful candidate will possess a working knowledge of electrical principles and practical experience as it relates to the electrical maintenance function.
• The technician will provide electrical support to the production crews, maintain, troubleshoot, and repair electrical and automation systems.
• The qualified candidate must be willing to work rotating shifts, including nights, weekends, vacation coverage, and holidays.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Requirements: Two-year degree, successful completion of electrical trade school, or a minimum of three years industrial experience or military.
Detailed Selection Criteria: • Communication Skills
- The ability to communicate information and ideas so others will understand.
• Initiative
- Willingness to take on responsibilities and challenges.
• Problem Solving & Judgement/Decision Making
- Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions.
• Teamwork
- Working as part of a coordinated effort with others to achieve a common goal.
• Engineering and Technology
- Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to work at hand.
• Dependability-Being reliable, responsible, and dependable, and committed to fulfilling obligations.
Preferences: • NFPA 70E training and applied experience • Knowledge of automation and networking equipment and processes such as PID/closed loop control systems, networking tools and standards, Variable Frequency Drive experience (ABB, AB), and HMI programming and troubleshooting • Overhead crane knowledge and repair experience • Basis pneumatic and hydraulic system knowledge
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: This position includes but is not limited to: • The successful candidate will possess a working knowledge of electrical principles and practical experience as it relates to the electrical maintenance function.
• The technician will provide electrical support to the production crews, maintain, troubleshoot, and repair electrical and automation systems.
• The qualified candidate must be willing to work rotating shifts, including nights, weekends, vacation coverage, and holidays.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Requirements: Two-year degree, successful completion of electrical trade school, or a minimum of three years industrial experience or military.
Detailed Selection Criteria: • Communication Skills
- The ability to communicate information and ideas so others will understand.
• Initiative
- Willingness to take on responsibilities and challenges.
• Problem Solving & Judgement/Decision Making
- Identifying problems and analyzing or reviewing related information to develop and evaluate options and implement solutions.
• Teamwork
- Working as part of a coordinated effort with others to achieve a common goal.
• Engineering and Technology
- Knowledge of the practical application of engineering science and technology.
This includes applying principles, techniques, procedures, and equipment to work at hand.
• Dependability-Being reliable, responsible, and dependable, and committed to fulfilling obligations.
Preferences: • NFPA 70E training and applied experience • Knowledge of automation and networking equipment and processes such as PID/closed loop control systems, networking tools and standards, Variable Frequency Drive experience (ABB, AB), and HMI programming and troubleshooting • Overhead crane knowledge and repair experience • Basis pneumatic and hydraulic system knowledge
Not Specified
N
Equipment Operator II
🏢 Nucor Corporation
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Properly follow company and OSHA safety procedures.
Attend safety meetings and participate in safety program.
Operate heavy equipment of various sizes including cranes and loaders, etc.
Duties include, but are not limited to: loading scrap material onto shredder feed conveyor, pushing shred pile up, moving material throughout the yard, and/or loading trucks and railcars, etc.
Perform daily inspections on equipment reporting any defects or needed repairs to supervisor.
Keep grounds clear of debris while maintaining safety standards.
Ability to lift up to 50 pounds Operate small equipment such as a forklift or skid steer if needed.
General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard.
Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures.
Willing to cross-train in other positions and assist other employees as needed.
Other duties as assigned by your manager.
Minimum Qualifications: Ability to work in a fast-paced, non-stop environment while providing excellent customer service.
Minimum of 3-years previous heavy equipment operation in manufacturing environments, preferably in the scrap metal or construction industries.
Knowledge of heavy equipment operating principles, hazards and safety precautions as well as mechanical ability.
Ability to understand and carry out written and oral instructions.
Ability to adapt to frequent changes of priority and complete job tasks safely and effectively without constant supervision.
Ability to lift up to 50 pounds Ability to meet attendance schedule with dependability and consistency.
Flexible to work overtime, off-hours, weekends, and holidays in an industrial environment which includes being outdoors in all weather conditions.
Preferred Qualifications: Bilingual preferred
- Spanish.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Properly follow company and OSHA safety procedures.
Attend safety meetings and participate in safety program.
Operate heavy equipment of various sizes including cranes and loaders, etc.
Duties include, but are not limited to: loading scrap material onto shredder feed conveyor, pushing shred pile up, moving material throughout the yard, and/or loading trucks and railcars, etc.
Perform daily inspections on equipment reporting any defects or needed repairs to supervisor.
Keep grounds clear of debris while maintaining safety standards.
Ability to lift up to 50 pounds Operate small equipment such as a forklift or skid steer if needed.
General labor duties that may include but not limited to sweeping, shoveling and general clean-up of any area and/or equipment throughout the yard.
Effectively communicate over radio with teammates for traffic coordination, production, and safety procedures.
Willing to cross-train in other positions and assist other employees as needed.
Other duties as assigned by your manager.
Minimum Qualifications: Ability to work in a fast-paced, non-stop environment while providing excellent customer service.
Minimum of 3-years previous heavy equipment operation in manufacturing environments, preferably in the scrap metal or construction industries.
Knowledge of heavy equipment operating principles, hazards and safety precautions as well as mechanical ability.
Ability to understand and carry out written and oral instructions.
Ability to adapt to frequent changes of priority and complete job tasks safely and effectively without constant supervision.
Ability to lift up to 50 pounds Ability to meet attendance schedule with dependability and consistency.
Flexible to work overtime, off-hours, weekends, and holidays in an industrial environment which includes being outdoors in all weather conditions.
Preferred Qualifications: Bilingual preferred
- Spanish.
Not Specified
N
DSM
🏢 Nucor Corporation
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: The Nucor Engineered Bar Group is seeking applicants for a District Sales Manager.
The role of the District Sales Manager consists of but is not limited to: providing industry leading service, prospecting for new business, operating as a liaison between customers and Nucor operations, forecasting, and proactive problem solving to help the team achieve revenue, shipment, and profitably goals.
This position will require extensive travel and will represent our Cold Finish Group, SBQ mills, and Wire Products Group.
Successful candidate will be located in either greater St.
Louis, MO or greater Milwaukee, WI region.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Qualifications: Minimum of 2 years of experience in sales-related field including experience with customer service, resolving customer concerns, and overall customer satisfaction Must live in or be willing to relocate within the territory Willingness to travel overnight extensively and live in the territory Detailed Selection Criteria: Safety-Oriented: Strong commitment to Safety in all job aspects.
Communication: Strong verbal and written communication skills.
Demonstrates strong ability to listen and effectively communicate the Nucor Engineered Bar Group Strategy to teammates and to our customers.
Growth Oriented: Outstanding abilities in negotiation and relationship building with customers to promote growth for the Nucor Engineered Bar Group.
Initiative: Proactively seeks out and recognizes work that needs to be done, opportunities for improvement, and is willing to take on responsibility and challenges.
Fosters Teamwork: Demonstrates strong ability to contribute to the team and engage in a collaborative work environment that promotes innovation and synergy.
Problem Solving and Decision Making: Identifies problems and opportunities, effectively analyzes related information to decide on the best path forward.
Efficiency: Excellent time-management and organizational skills.
Technology: Proficient in utilizing computer and IT resources for the purposes of managing the territory and providing pertinent customer information for the Nucor Engineered Bar Group.
Preferred Qualifications: Sales or leadership experience in steel or related industry Outside steel sales experience, preferably within Cold Finish, SBQ, or Wire Products 4 year college degree in business/marketing or field related to the steel business
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: The Nucor Engineered Bar Group is seeking applicants for a District Sales Manager.
The role of the District Sales Manager consists of but is not limited to: providing industry leading service, prospecting for new business, operating as a liaison between customers and Nucor operations, forecasting, and proactive problem solving to help the team achieve revenue, shipment, and profitably goals.
This position will require extensive travel and will represent our Cold Finish Group, SBQ mills, and Wire Products Group.
Successful candidate will be located in either greater St.
Louis, MO or greater Milwaukee, WI region.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Qualifications: Minimum of 2 years of experience in sales-related field including experience with customer service, resolving customer concerns, and overall customer satisfaction Must live in or be willing to relocate within the territory Willingness to travel overnight extensively and live in the territory Detailed Selection Criteria: Safety-Oriented: Strong commitment to Safety in all job aspects.
Communication: Strong verbal and written communication skills.
Demonstrates strong ability to listen and effectively communicate the Nucor Engineered Bar Group Strategy to teammates and to our customers.
Growth Oriented: Outstanding abilities in negotiation and relationship building with customers to promote growth for the Nucor Engineered Bar Group.
Initiative: Proactively seeks out and recognizes work that needs to be done, opportunities for improvement, and is willing to take on responsibility and challenges.
Fosters Teamwork: Demonstrates strong ability to contribute to the team and engage in a collaborative work environment that promotes innovation and synergy.
Problem Solving and Decision Making: Identifies problems and opportunities, effectively analyzes related information to decide on the best path forward.
Efficiency: Excellent time-management and organizational skills.
Technology: Proficient in utilizing computer and IT resources for the purposes of managing the territory and providing pertinent customer information for the Nucor Engineered Bar Group.
Preferred Qualifications: Sales or leadership experience in steel or related industry Outside steel sales experience, preferably within Cold Finish, SBQ, or Wire Products 4 year college degree in business/marketing or field related to the steel business
Not Specified
N
Detailer/ AutoCAD Drafter
🏢 Nucor Corporation
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Short Description Detail commercial and civil projects as it pertains to the supply and installation of rebar.
Basic Job Functions: Must adhere to Nucor Rebar Fabrication’s safety programs and standards.
Demonstrate conduct consistent with Nucor Rebar Fabrication’s vision and values.
Continue developing knowledge of industry reference material (i.e.
CRSI and ACI manuals).
Verify drawings, dates, specifications, addenda and other contractual information from the routing sheet or directly from the business system.
Working with supervision, begin detailing more complex projects (i.e.
jobs with columns, beams, one- and two-way slabs, and grade beams).
Bring any change(s) made to the contract documents to the attention of your supervisor (i.e.
change made of the approval drawings, changes made by the field or yourself).
Detail accessories, mesh, couplers and dowel bars and prepare material lists as required.
Work with job site personnel to determine project requirements for detailing and delivery of material.
Work with A/E regarding problems or questions on contract documents.
Produce the material list for all products from RebarCAD and produce replacement orders as required.
Enter all drawings for submission into the drawing tracking system.
Perform other duties as required by your supervisor.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Requirements: Must be legally authorized to work in the United States without company sponsorship now or in the future Vocational certificate in CAD design/drafting issued from an accredited school or college, or equivalent combination of training and work experience At least one year of experience detailing rebar using a CAD based detailing system Preferences: Two-year technical degree from an accredited school or college Construction and concrete related construction knowledge and experience Working knowledge of industry reference material (i.e.
CRSI and ACI) Physical Demands: Typical office activities Walking, sitting, standing, bending Using hands to operate objects, tools, computers and other electronic equipment Lifting/handling computers and related equipment Vision abilities including close vision and adjusting focus Moderate noise level Special Demands: Must be able to work overtime when required May be asked to complete approximately two hours of assessments as part of the hiring process
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Short Description Detail commercial and civil projects as it pertains to the supply and installation of rebar.
Basic Job Functions: Must adhere to Nucor Rebar Fabrication’s safety programs and standards.
Demonstrate conduct consistent with Nucor Rebar Fabrication’s vision and values.
Continue developing knowledge of industry reference material (i.e.
CRSI and ACI manuals).
Verify drawings, dates, specifications, addenda and other contractual information from the routing sheet or directly from the business system.
Working with supervision, begin detailing more complex projects (i.e.
jobs with columns, beams, one- and two-way slabs, and grade beams).
Bring any change(s) made to the contract documents to the attention of your supervisor (i.e.
change made of the approval drawings, changes made by the field or yourself).
Detail accessories, mesh, couplers and dowel bars and prepare material lists as required.
Work with job site personnel to determine project requirements for detailing and delivery of material.
Work with A/E regarding problems or questions on contract documents.
Produce the material list for all products from RebarCAD and produce replacement orders as required.
Enter all drawings for submission into the drawing tracking system.
Perform other duties as required by your supervisor.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Requirements: Must be legally authorized to work in the United States without company sponsorship now or in the future Vocational certificate in CAD design/drafting issued from an accredited school or college, or equivalent combination of training and work experience At least one year of experience detailing rebar using a CAD based detailing system Preferences: Two-year technical degree from an accredited school or college Construction and concrete related construction knowledge and experience Working knowledge of industry reference material (i.e.
CRSI and ACI) Physical Demands: Typical office activities Walking, sitting, standing, bending Using hands to operate objects, tools, computers and other electronic equipment Lifting/handling computers and related equipment Vision abilities including close vision and adjusting focus Moderate noise level Special Demands: Must be able to work overtime when required May be asked to complete approximately two hours of assessments as part of the hiring process
Not Specified
N
Night Shift - Production Operator
🏢 Nucor Corporation
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Purpose Hours: 10pm
- 7:30am Bend, cut, bundle and load reinforcing steel bars in accordance with customer’s orders Basic Job Functions: Must adhere to Nucor's safety programs and standards.
Demonstrate conduct consistent with Nucor’s vision and values.
Unload trailers and store material in storage bins.
Operate a shearing machine to cut reinforcing steel bars to specific lengths.
Operate a bending machine to bend reinforcing steel bars to specified shape.
Operate overhead crane to move, assemble and select material to be fabricated or shipped.
Operate Fabmatic machine that cuts and bends reinforcing steel bars to specified shapes.
Assemble and load orders onto trailers for shipping.
Operate power saw for cutting reinforcing steel bars to specified lengths.
Operate a spray gun in the application of epoxy touch up or reinforcing steel bars.
Maintain the shop or designated area in a clean and safe manner.
Assist other employees in any of the above tasks.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Must have a high school diploma, GED or local/state equivalent Physical Demands Some heavy lifting may be necessary Working conditions can be noisy/ dusty/ hot/ cold Special Demands Due to the operating conditions of the position, this is a safety sensitive position Must be able to work overtime when required Must be able to work any shift
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Purpose Hours: 10pm
- 7:30am Bend, cut, bundle and load reinforcing steel bars in accordance with customer’s orders Basic Job Functions: Must adhere to Nucor's safety programs and standards.
Demonstrate conduct consistent with Nucor’s vision and values.
Unload trailers and store material in storage bins.
Operate a shearing machine to cut reinforcing steel bars to specific lengths.
Operate a bending machine to bend reinforcing steel bars to specified shape.
Operate overhead crane to move, assemble and select material to be fabricated or shipped.
Operate Fabmatic machine that cuts and bends reinforcing steel bars to specified shapes.
Assemble and load orders onto trailers for shipping.
Operate power saw for cutting reinforcing steel bars to specified lengths.
Operate a spray gun in the application of epoxy touch up or reinforcing steel bars.
Maintain the shop or designated area in a clean and safe manner.
Assist other employees in any of the above tasks.
Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Minimum Qualifications: Must be legally authorized to work in the United States without company sponsorship now or in the future Must have a high school diploma, GED or local/state equivalent Physical Demands Some heavy lifting may be necessary Working conditions can be noisy/ dusty/ hot/ cold Special Demands Due to the operating conditions of the position, this is a safety sensitive position Must be able to work overtime when required Must be able to work any shift
Not Specified
N
CDL Driver III-KCKS
🏢 Nucor Corporation
Salary not disclosed
Nucor is North America's largest recycler and most diversified steel and steel products company.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Job Summary We are seeking a reliable and safety-focused Class A CDL DRiver to join our team.
The ideal candidate will have a strong work ethic, an excellent driving record, a committment to safety, and compliance with all DOT/OSHA regulations.
Safely Operate a Class A Commercial Vehicle (Roll-off Truck and Tractor-Trailer) Transport goods to designated locations on time Perform daily pre-trip and post-trip inspections Maintain accurate logs and delivery documentation Follow all DOT, FMCSA, OSHA, and company safety regulations Communicate effectively with dispatch and customers Secure cargo properly and ensure load safety Minimum Qualifications: Valid Class A CDL license Ability to effectively communicate in English Minimum age 25 years old Clean Driving Record Verifiable 3 years of CDL-A driving experience, in a 5-year period Ability to pass DOT physical and drug screening Knowledge of ELD systems Ability to meet attendance schedule with dependability and consistency.
Schedule: Mon-Fri, 6:30am-4:30pm, with the potential for occasional overtime to meet business needs Preferences: Roll Off experience preferred- Minimum 1 year Knowledge and experience of Hydraulic system preferred- Minimum 1 year Compensation- Benefits Weekly, competative pay: Annual average pay 50K with the potential to earn more Local work, home nightly Health, dental, vision, and life insurance 401(k), Stock purchase option Paid time off and holidays Detailed Selection Criteria: Complete work history is required to be considered for this position.
Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held.
Any gap in work history must be reflected and include the dates.
Since 1969, we've led the industry in developing innovative technologies for recycling scrap into high-quality steels that are all around us, from bridges and buildings to cars and appliances.
Basic Job Functions: Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.
Job Summary We are seeking a reliable and safety-focused Class A CDL DRiver to join our team.
The ideal candidate will have a strong work ethic, an excellent driving record, a committment to safety, and compliance with all DOT/OSHA regulations.
Safely Operate a Class A Commercial Vehicle (Roll-off Truck and Tractor-Trailer) Transport goods to designated locations on time Perform daily pre-trip and post-trip inspections Maintain accurate logs and delivery documentation Follow all DOT, FMCSA, OSHA, and company safety regulations Communicate effectively with dispatch and customers Secure cargo properly and ensure load safety Minimum Qualifications: Valid Class A CDL license Ability to effectively communicate in English Minimum age 25 years old Clean Driving Record Verifiable 3 years of CDL-A driving experience, in a 5-year period Ability to pass DOT physical and drug screening Knowledge of ELD systems Ability to meet attendance schedule with dependability and consistency.
Schedule: Mon-Fri, 6:30am-4:30pm, with the potential for occasional overtime to meet business needs Preferences: Roll Off experience preferred- Minimum 1 year Knowledge and experience of Hydraulic system preferred- Minimum 1 year Compensation- Benefits Weekly, competative pay: Annual average pay 50K with the potential to earn more Local work, home nightly Health, dental, vision, and life insurance 401(k), Stock purchase option Paid time off and holidays Detailed Selection Criteria: Complete work history is required to be considered for this position.
Include the employer's name, dates of employment, job title and the detailed responsibilities for the position held.
Any gap in work history must be reflected and include the dates.
Not Specified
M
Mailroom Coordinator
Salary not disclosed
Candidates who receive an offer will be required to successfully complete a background check and drug test as a condition of employment.
Mailroom Clerk Columbus, OH (Onsite with free parking) 7 Months Contract Shift: 8 AM 5 PM Mon-Fri Interview Type: Virtual and In-person Responsibilities Assist with mailroom operations including sorting mail and conducting two mail runs.
Post mail and operate machines: Letter folder Envelope stuffer Letter opening machine Postal machine Scan incoming mail and packages.
Track volume counts and maintain records.
Perform standard mailroom functions.
Balance standing and sitting tasks (no prolonged standing).
Walk to deliver mail as needed.
Qualifications High School Diploma or GED.
1 2 years of related experience (mailroom, document imaging, data entry).
Related copy job experience preferred.
May require valid driver s license and auto insurance per client policy.
Knowledge, Skills & Abilities Excellent customer service skills.
Good PC skills.
Strong organizational and prioritization skills.
Mathematical and filing skills.
Ability to operate office machines and technical equipment.
Working Conditions & Physical Demands Office environment with adequate lighting, ventilation, normal temperature, and noise levels.
Diversified work assignments requiring comprehension and application of complex material.
Some physical effort: Standing, walking, bending, reaching, stretching, climbing.
Lifting/moving items up to 50 55 lbs.
Pushing/pulling machines on wheels (up to 700 lbs.) for repairs.
Walking between buildings may be necessary.
Moderate dexterity: calculator, keyboard, hand tools, eye/hand coordination.
Metasys Technologies is an equal opportunity employer.
All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identify, national origin, veteran or disability status.
Mailroom Clerk Columbus, OH (Onsite with free parking) 7 Months Contract Shift: 8 AM 5 PM Mon-Fri Interview Type: Virtual and In-person Responsibilities Assist with mailroom operations including sorting mail and conducting two mail runs.
Post mail and operate machines: Letter folder Envelope stuffer Letter opening machine Postal machine Scan incoming mail and packages.
Track volume counts and maintain records.
Perform standard mailroom functions.
Balance standing and sitting tasks (no prolonged standing).
Walk to deliver mail as needed.
Qualifications High School Diploma or GED.
1 2 years of related experience (mailroom, document imaging, data entry).
Related copy job experience preferred.
May require valid driver s license and auto insurance per client policy.
Knowledge, Skills & Abilities Excellent customer service skills.
Good PC skills.
Strong organizational and prioritization skills.
Mathematical and filing skills.
Ability to operate office machines and technical equipment.
Working Conditions & Physical Demands Office environment with adequate lighting, ventilation, normal temperature, and noise levels.
Diversified work assignments requiring comprehension and application of complex material.
Some physical effort: Standing, walking, bending, reaching, stretching, climbing.
Lifting/moving items up to 50 55 lbs.
Pushing/pulling machines on wheels (up to 700 lbs.) for repairs.
Walking between buildings may be necessary.
Moderate dexterity: calculator, keyboard, hand tools, eye/hand coordination.
Metasys Technologies is an equal opportunity employer.
All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identify, national origin, veteran or disability status.
Not Specified
jobs by
✓ All jobs loaded