Dimensional Metals Inc Jobs in Usa

Founded in 1972, Midwest Drywall is an employee-owned company and leading contractor of panel engineering, fabrication, installation, EIFS/plaster, metal-studs, drywall, specialty ceilings and finish carpentry. Headquartered in Wichita, Kansas, Midwest Drywall serves customers throughout the United States.

Responsibilities

• Minimum 5 years of experience at a framing and drywall company supervising projects of wide-ranging sizes, including manpower management, communication with project staff, safety, and ensuring projects are delivered on time and on budget.
• Build strategic relationships with Project Managers, General Contractors and Subcontractors to determine project needs and monitor/report on progress.
• Advanced knowledge of technical construction methods, operations, processes, cost impact analysis, and local quality/safety/health guidelines.
• Set performance goals and deadlines; foster a team environment to ensure good communication, coordination of duties, and effective problem solving.
• Oversee adherence of the current safety program by all construction personnel.
• Organize and order appropriate equipment and maintenance; track material stock and incoming orders.
• Supervise staff and provide constructive feedback to maintain compliance with company policies and standards.

Qualifications

• Bachelor's degree in engineering or construction science/management, or significant industry experience leading large and complex projects.
• Demonstrated experience as a commercial construction superintendent or similar role.
• Previous experience with Bluebeam and Procore preferred.
• Must be willing to travel between jobsites.
• Valid Driver's license required.

Skills

• Excellent communication skills; bilingual (English/Spanish) is a plus.
• Knowledge of framing and drywall preferred.
• Self-motivated, diligent and proactive.

Benefits

• Employee Stock Ownership Plan (ESOP)
• 401(k) with company-paid match
• Medical, dental and vision insurance
• Generous paid time off
• Company-paid life and AD&D insurance

Equal Opportunity Employer:

Midwest Drywall Co Inc is an equal opportunity employer, we welcome and encourage diversity in our workforce. We do not discriminate on the basis of race, color, religion, sex, national origin, age, disability, or any other legally protected status. All qualified applicants will receive consideration for employment without regard to these factors.

E-Verify:

Midwest Drywall participates in the E-Verify program to verify employment eligibility of our employees. E-verify compares information provided on the Form I-9 to data from the US Department of Homeland Security and the Social Security Administration to confirm an individual’s eligibility to work in the US.

Key Role Description

The Metals Supervisor leads the mechanics and support crafts responsible for maintaining fixed equipment in the refinery. This includes, but is not limited to heaters, boilers, ducting, vessels, piping, valves, and structural steel. This role oversees union metals mechanics, contractors (union and non-union), and outside shops to successfully complete their tasks in a safe and cost-effective manner. The Metals Supervisor assures all maintenance work complies with applicable safety, engineering, safe work practice standards, laws, and regulations.

Role Specific Competencies

At Monroe, we have identified eleven specific competencies we expect all leaders of our organization to possess. These competencies are incorporated as a part of our Selection, Performance Management/Review and Developmental processes. The competencies and activities for this role are detailed below:

Technical Knowledge - demonstrates the specific skills necessary for the assignments, understands the background and points of leverage to be effective in the role.

• 
  
  
• Conduct morning tool box talks with work crews
  
  
• Directs the daily activities of metals mechanics, metals contractors, and support crafts in maintaining refinery equipment and facilities
  
  
• Achieves high levels of craft productivity through improved performance; solving problems, reliability and reducing costs.
  
  
• Review Weekly Schedule and work packages for every job and provide to work crews. Communicate changes as required
  
  
• Execute the Daily and Weekly Maintenance Schedules and communicate with Scheduler for any changes
  
  
• Prepare & Lead Pre-Job Meetings
  
  
• Adhere to the break-in work process and handle all Emergency / Break-In work as required
  
  
• Follow job plans and communicate with Planner for needed changes
  
  
• Provide Planner feedback for any planning deficiencies (Missed steps, materials, Man-hours, etc.)
  
  
• Perform follow-up rounds with crews, both Monroe and contractor, regularly throughout shift (no greater than every two hours) Items to be evaluated include:
  
  

• 
  
  
  • 
    
    
  • Following safe work practices
    
    
  • Barriers to success
    
    
  • Any required help to the crew
    
    
  • Job progress
    
    
  • Crew size and productivity
    
    
  • Work package available and job plan being followed
    
    
  
  
  
• Enforce start, stop & break times
  
  
• Work with others at peer level to ensure quick and efficient resolution to issues
  
  
• Elevate issues promptly to Leadership when required
  
  
• Confirm job plan steps in Maximo daily before 2:30 schedule meeting.
  
  
• Review following week's schedule and provide feedback by end of shift Thursday before final version
  
  
• Provide daily updates on all work under your supervision - accurate communication of end of shift status
  
  
• Communicate status of on-going work with Operations and OMC
  
  
• Arrange overtime & off-hour coverage for employees and contractors as required
  
  
• Support reliability improvements
  
  
• Support on-call maintenance system as needed throughout the year
  
  

Knowledge of Work Areas and Responsibilities - demonstrates a clear understanding of role and responsibilities within specific area, flexible and agile in adapting to changes or exploring opportunities and challenges.

• 
  
  
• Attends the daily scheduling meeting to communicate effectively with other Maintenance departments and Operations to resolve any scheduling issues, priority changes, and any problems between Crafts, Operations, Maintenance and other departments.
  
  
• Consults with the Fixed Equipment Reliability Engineering group to improve reliability and ensure that maintenance work meets the requirements of mechanical, process, metallurgical and environmental codes, policies and standards.
  
  
• Attends the daily morning maintenance and operations meeting to discuss any schedule breakers for the day and coordinate with other maintenance crafts on any exceptions to the daily schedule.
  
  
• Initiates requisitions for required materials, tools and contractor services as required including tool room materials.
  
  
• Reviews and approves employee's time.
  
  
• Knows and consistently applies company policies, procedures and the collective bargaining agreement.
  
  

Communications - Verbal and Written - includes written and verbal communications, delivers presentations and has good listening skills.

Problem Solving and Conflict Leadership - strives to understand contributing factors, works to resolve complex situations, and helps individuals to resolve conflicts.

Delivering Results - Sense of Urgency - defines appropriate goals, works toward achieving goals, articulates vision and steps for achievement, meets deadlines and provides timely status updates and follow-through.

Teamwork/Cooperation - accountable to team, works to meet established deliverables, appreciates view of team members and is respectful of others.

Initiative - takes action, seeks new opportunities, and strives to see projects to completion.

Work Reliability/Quality - strives to eliminate errors, accurate work is a priority, and seeks opportunities to improve product/services.

Integrity and Trust - honest, accountable, upholds ethics standards and maintains confidentiality.

Leadership Capability - provides strong leadership, sets a good example, skilled decision maker, motivator and encourager.

People Development/Coaching - offers feedback, coaches employees appropriately, rewards employees wisely, takes mentoring role, challenges and develops employees and offers opportunity.

• 
  
  
• Interacts with direct reports on a daily basis to ensure clear and open communications; alignment with goals and objectives; and to proactively address progress, concerns and questions.
  
  

Education, Experience, and Skill Requirements

Minimum Qualifications:

• 
  
  
• 5 years of maintenance supervisory experience in a high-risk industry such as refining, petrochemical, or chemical processing.
  
  
• High School Diploma or equivalent experience required; AA or BS Degree preferred.
  
  
  • 
    
    
  • Proficient with Microsoft Word, Outlook, and Excel as well as CMMS software.
    
    
  • Demonstrated proficiency in all of Role Specific Competencies.
    
    
  
  
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Metal Surface Processor to join our Fabrication team in Auburn, Algona and Puyallup, Washington.

As a Metal Surface Processor, you’ll be part of a skilled team responsible for preparing metal components for aerospace applications through specialized surface treatment processes. From cleaning and masking to anodizing and coating, your work will directly support the quality and performance of parts built for flight. This role requires precision, technical ability, and a strong commitment to safety as you work with complex equipment and follow detailed procedures to ensure each component meets exact specifications.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities:

• Review the tie-in book or standard operating procedures to understand daily work assignments. Provide comprehensive oral or written shift handoffs to ensure seamless workflow continuity.

• Monitor the workload in the area and coordinate task flow to optimize shop utilization. Proactively report issues or request additional support as necessary.

• Identify, separate, and prepare parts according to work orders and chemical recipes (e.g., alkaline, emulsion, paint strip, sandblast, passivate) prior to racking.

• Conduct thorough inspections of materials to verify proper cleaning, etching, rinsing, and other processes to ensure optimal adhesion and coating quality. Perform visual checks post-process to confirm uniform coverage.

• Apply approved masking materials and coatings based on technical drawings or tooling specifications in preparation for plating or painting operations.

• Determine appropriate racking methods for complex part geometries, ensuring proper contact to prevent burning. Inspect, remove, and report any damaged racks or clips.

• Rack and unrack parts while verifying correct part numbers and chemical processes as per work orders. Ensure no overloading or air pocket formation occurs during handling.

• Operate material handling systems, including cranes, hoists, and carts, safely to transport parts and materials through processing areas.

• Operate and monitor cleaning, Dow Coating, anodizing, dyeing, alodine, and rinsing tanks. Determine correct dip times and maintain appropriate temperatures and solution levels.

• Perform specific treatments such as sulfuric/chromic acid dips on 75 ST parts formed on Cerro Bend. Apply alodine touch-ups or chromadize as required.

• Assist in maintaining chemical strength by accurately measuring and adding solutions. Estimate material surface area to prevent generator overloads.

• Start generators, operate control panels, and utilize overhead cranes to load/unload tanks and transfer processed items between stations.

• Strip anodizing from racks using caustic soda and nitric acid. Clean tanks, crocks, and equipment to ensure safe and efficient operations.

• Mark, oil, wrap, and route completed parts according to drawings or work orders. Ensure correct parts are matched to work orders and transferred to Quality Assurance (QA) for inspection.

• Handle and dispose of hazardous materials (e.g., alodine, acids, solvents) in accordance with safety procedures. Complete all required on-the-job training and maintain necessary certifications.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee

Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• 1+ years of experience using basic math (e.g. addition, subtraction, multiplication and division).

• 1+ years of experience or training reading and interpreting drawings or blueprints.

• 1+ years of experience working with hazardous materials.

• Must be able to lift, push and pull up to 35 pounds

Preferred Qualifications:

• Experience operating cranes.

Typical Education & Experience:

• High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for a variety of shifts.

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent.  Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.  

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.  

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay: $24.32/hour, with potential to earn up to $53.30/hour in accordance with the terms of the relevant collective bargaining agreement.

Applications for this position will be accepted until Apr. 11, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

POSITION OVERVIEW

We are seeking an experienced Sheet Metal Mechanic with 5+ years of experience performing repairs, installations, and modifications to aircraft. The ideal candidate will possess a strong understanding of sheet metal fabrication and repair, with a focus on safety and precision, and prior helicopter experience. Join our team and work on cutting-edge aviation projects in a dynamic and rewarding environment!

KEY RESPONSIBILITIES

• Comply with all safety regulations and procedures while performing work.
• Read and interpret engineering drawings, blueprints, manuals, and specifications to determine layout requirements.
• Mark outlines or patterns on materials using measuring instruments and scribes.
• Set up and operate fabricating machines (shears, brakes, presses, forming rolls, punch and drill presses) to cut, bend, block, form, punch, drill, or shape parts to specifications.
• Operate soldering equipment to join sheet metal parts.
• Smooth edges and surfaces of grooves or joints using hand tools, power tools, files, or chemicals.
• Inspect completed work for conformance to specifications and tolerances using precision measuring instruments.
• Diagnose and repair structural discrepancies as needed.
• Install structural components such as bulkheads, formers, stringers, ribs, frames, and other components.
• Install insulation materials (fiberglass, polyurethane) using hand or power tools.
• Repair dents, cracks, and damage to the aircraft skin using appropriate hand tools.
• Repair holes in aircraft skins with patch materials like aluminum, composites, fiberglass, or synthetic resin materials.
• Install, repair, and replace aircraft skins, structural components, and interior furnishings (insulation, carpeting, vinyl flooring, seats, paneling, soundproofing materials, paint).
• Keep detailed records of all repairs and work performed on aircraft in compliance with repair station guidelines.

REQUIRED EXPERIENCE & QUALIFICATIONS

• 5+ years of experience as a sheet metal mechanic
• Helicopter experience STRONGLY preferred
• Working knowledge of blueprint reading, geometry, and trigonometry.
• Proficient in the use of hand tools, power tools, and welding equipment.
• Familiarity with aviation maintenance manuals and repair station guidelines.
• Personal basic tools/box required

PHYSICAL & COMPLIANCE REQUIREMENTS

• Must be able to pass a 10-year criminal background check and FAA DOT drug test.
• Proof of U.S. Citizenship required.
• US Driver's License.

PAY & SCHEDULE

• Hourly based off of experience and interview.
• Split per diem is available to those who qualify
• Paid weekly after the first week of work
• OT is time and 1⁄2
• Monday – Friday
• 7:00am – 3:00pm
• Must be flexible to work OT when needed

HELICOPTERS SERVICED

• Airbus Helicopters
• Leonardo (AgustaWestland)
• MD Helicopters
• Sikorsky
• Bell

Metal finishing and plating touches everything - medical devices, aerospace, defense, tools, hardware, and critical U.S. manufacturing. Most people don't know this industry exists. That's okay.

Our trade is not taught in schools. We'll train you! Training involves both hands-on training and online coursework, related to plating processes, metals, and chemical properties.

What we can't train? Work ethic. Reliability. Initiative.

If you show up, stay focused, and want to grow - this is a real career path with long-term opportunity!

____________________

Attendance matters:We rely on our team being here when scheduled. Our success depends on employees that show up to work. That means showing up every day, on time, and not leaving early. We reward strong attendance with bonuses!

Strict security protocols:Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas).

Warehouse environment: Exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations.

Career-oriented: Youll have the chance to grow with us if you bring a strong work ethic and initiative. Growth can be becoming an expert in the position, becoming a lead/trainer, changing departments, or going into a supervisor/manager role. It all depends on what interests the employee and the effort put forth by the employee.

We conduct in-person interviews only:This position is located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad.
____________________

What You'll Do

• Perform plating operations per specifications and quality standards
• Set up, monitor, and control plating lines and chemical baths
• Process parts for required durations per shop paperwork
• Inspect parts for thickness, defects, and quality compliance
• Verify correct racking prior to plating
• Operate and assist with plating tanks and rinse systems
• Complete all required paperwork accurately
• Follow all safety procedures and properly use PPE
• Identify and report process or equipment issues
• Maintain a clean and organized work area
• Work independently while meeting production goals

This is active workyoull be on your feet, using your hands, and staying focused. If you like staying busy, personal accountability, and seeing tangible results of your efforts, youll thrive here!

____________________

What We're Looking For

• Reliable attendance and strong work habits (showing up matters hereyour team counts on you!)
• 0-2 years plating or manufacturing experience
• Ability to follow directions, and work safely
• Attention to detail
• Basic math and measuring skills
• Comfort with tools like rulers/tape measures and digital systems (computers/tablets)
• Teamwork and cooperative mindset
• Commitment to safety and quality standards
• Forklift experience is a plus!
• Interest in industry certifications (CEF/NASF)
• Desire to meet production and performance expectations
• U.S. work authorization
• MUST be able to speak, read, write, and understand English

____________________

What We Offer (Perks & Benefits)

We invest in people who invest in their work.

• Competitive Pay and Signing Bonus
• Work-Life Balance: 4-day work week (MonThurs) + overtime on Friday as needed
• Reviews & Raises: Performance reviews at 60 days, 6 months, then twice a yearraises available if expectations are met
• Bonuses: Quarterly profit-sharing + attendance rewards
• Paid Time Off: Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary
• Retirement Support: 401k with company contributions
• Insurance Coverage: Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more!
• Paid Extras: Uniforms, prescription safety glasses, safety boots, referral bonuses, and more

• Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected.
• No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview.
• If you are selected for an interview, you will be contacted via text/email. (As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.)
• Expect a response within 14 days of your application.

____________________

Security: This position operates within a secure manufacturing facility. All employees must adhere to strict security policies, including restrictions on personal electronic devices, access control, and documentation procedures.

Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply!

Work Authorization / Security Clearance:

The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company.

Disclaimer:

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

For more information on our company, visit:

About Us

Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $7.6 billion in revenue for 2024, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects.

The Role We Want You For

The primary function of the Miscellaneous Metals Estimator, Steel Procurement is to provide accurate bid proposals for Miscellaneous Metals and scope analysis for potential construction projects.

The Specifics of the Role:

• Responsible for accurate material quantity take-off
• Develops comprehensive, detailed proposal for the project estimated
• Maintain project budget throughout each project, with profit and loss accountability
• Identify opportunities for change orders and establish cost where applicable
• Prepare, issue and track change order status for material above and beyond the original contract
• Develop options and recommend best value solutions based on cost, engineering, quality, or availability of materials
• Additional responsibilities include quote review, project management, and material purchasing
• Ensure department achieves goals through management and leadership mentality
• Functions as Lead Estimator

Requirements:

• 5+ years of experience
• Bachelors degree in Construction management or Engineer recommended.
• Knowledge of construction principles/practices required
• Problem-solving skills, with an adaptable and flexible style in working with all types of individuals
• Project set up, budget planning, buy out, and cost reporting experience is a must
• Good understanding of critical path scheduling.
• Energetic and highly motivated with a strong sense of urgency
• Entrepreneurial and self-motivated, with the ability to work equally well on own as well as in a team environment.
• Knowledge and understanding of building construction combined with steel design concepts presented on architectural and engineering drawings
• Ability to understand construction drawings and specifications.
• Ability to work with Microsoft Office Suite, On-Screen Estimating software and ACC Build
• Knowledge of Miscellaneous Metals
• Knowledge and understanding of building construction combined with steel design concepts presented on architectural and engineering drawings
• Ability to understand construction drawings and specifications
• Ability to prepare proposals with minimum supervision
• Candidates must have a strong understanding of detailed estimating, estimating techniques and cost control
• Strong written and verbal communication skills. Candidates should be able to clearly articulate bid inclusions, exclusions, and proposal clarifications with owners and subcontractors
• Must be able to multitask and prioritize responsibilities
• Review proposals, specifications, drawing, attend pre-bid meetings, etc…to determine scope of work and develop quantity take-offs
• Develops and maintains relationships with general contractor
• Responsible for buyout process with Project Manager.

Some Things You Should Know

• Our clients and projects are nationwide – Travel will be required.
• No other builder can offer the collaborative design-build approach that Clayco does.
• We work on creative, complex, award-winning, high-profile jobs.
• The pace is fast!
• This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing.

Why Clayco?

• 2024 Best Places to Work – Crain’s Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal.
• 2024 ENR Midwest – Midwest Contractor (#1).
• 2024 ENR Top 100 Design-Build Firms – Design-Build Contractor (Top 5).
• 2024 ENR Top 100 Green Contractors – Green Contractor (Top 5).

Benefits

• Discretionary Annual Bonus: Subject to company and individual performance.
• Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more!

Compensation

• The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Our client is seeking an experienced Chief Operating Officer (COO) to oversee internal operations and provide leadership across estimating, project management, detailing coordination, and fabrication planning. This role will work closely with ownership and serve as a senior client-facing representative with general contractors and developers.

This is a key leadership role for an individual with strong experience in the structural steel or miscellaneous metals fabrication industry who can bring operational discipline, leadership, and strategic oversight to a growing organization.

Responsibilities

• Provide executive oversight of daily operations including estimating, project management, detailing coordination, and fabrication planning
• Lead and mentor department managers and office staff
• Review major bids and estimates to ensure accuracy, competitiveness, and risk management
• Monitor project pipeline, backlog, scheduling, and overall operational performance
• Work with project management teams to ensure projects are delivered on schedule and within budget
• Develop and improve operational systems, reporting, and internal processes
• Serve as a senior point of contact for key clients including general contractors and developers
• Support ownership in strategic planning, operational improvements, and company growth initiatives

Qualifications

• 10+ years of leadership experience within structural steel or miscellaneous metals fabrication
• Strong understanding of estimating, detailing coordination, project management, and fabrication workflows
• Experience overseeing operations for companies with $20M+ annual revenue
• Proven ability to lead teams and manage multiple complex construction projects simultaneously
• Strong communication and client relationship skills

Preferred

• Background as an Operations Director, General Manager, or senior project executive in a fabrication environment
• Track record of improving operational efficiency and organizational structure

We are SGS – the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world.

Our East Syracuse, NY laboratory is looking for a Laboratory Supervisor to lead their Metals team! The Laboratory Supervisor is responsible for the day-to-day operations of their respective department. The Laboratory Supervisor works with Team Leads to manage sample throughput to ensure turnaround times are met while maintaining data quality that meets or exceeds industry standards. The Laboratory Supervisor is responsible for promoting a safe working culture and environment throughout the laboratory.

Job Functions

• Coordinates workflow through the department to ensure turnaround times are met
• Works with Senior Analysts and Senior Technicians to manage staff and instrumentation resources to maximize sample throughput and ensures production targets are met
• Uses LIMS to ensure that samples are processed appropriately and updates the samples’ status in LIMS as required
• Applies technical judgment to determine potential problems for samples processed
• Helps implement best practices in the laboratory to maximize operational efficiency and maintain data quality that meets or exceeds industry standards
• Demonstrates good leadership through effective planning, delegating and empowering subordinates appropriately, and leading by example. Manages people and performance daily, acting quickly and decisively when required.
• Ensures staffing levels are appropriate for sample volumes and that staff are properly trained to perform their assigned duties
• Works with the Laboratory Manager to oversee hiring and training competent laboratory personnel
• Assists with the training of new analysts to become productive members of the team
• Ensures the lab’s operating supplies inventory is appropriate for current workloads
• Appropriately follows safety requirements for the work that is done and ensure that your team members are also following these requirements
• Immediately addresses safety problems as they arise in the lab (i.e. hood use, safety glasses, methylene chloride handling) to minimize exposure and maximize safe practices
• Actively promotes a strong culture of safe laboratory practices and the maintenance of a safe working environment
• Keeps supervisory and management teams informed of any potential problems
• Provides information to supervisory and managerial staff as appropriate on instrumentation, production, and staff issues
• Performs other duties as required
  
  

• Bachelor's Degree in a Chemistry discipline and 4+ years of years’ relevant experience in Analytical Chemistry Laboratories or equivalent education and experience (Required)
• ICP/ICPMS experience (Required)
• 3+ years of mass spectrometry (Strongly preferred)
• 1+ years of supervisory experience (Strongly preferred)
• Advanced English language skills (Required)
• Knowledge of environmental testing protocols, regulations, and certifications related to the department (Required)
• Strong analytical thinking and problem-solving skills are a requirement of this position (Required)
• Must have a solid understanding of process and workflow (Required)
• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations (Required)
• Ability to read and interpret documents such as SOPs, safety rules, operating and maintenance instructions, and procedure manuals (Required)
• Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization (Required)
• Demonstrates an utmost level of integrity in all instances and shows respect towards others and towards company principles (Required)
• Excellent oral and written communication skills; actively listens to others, asks questions to verify understanding, and uses tact and consideration when delivering feedback to others (Required)
• Excellent time management skills which include the ability to balance multiple projects concurrently (with different deadlines) and arrange the resources necessary to accomplish them (Required)
• Proficiency in Microsoft Office programs (i.e. Excel, Word, Outlook) (Required)
• Experience with LIMS (Preferred)

Compensation

The expected salary range for this position is $65,000 – $75,000 annually. This range represents the minimum and maximum base salary we reasonably expect to pay for this role. Actual compensation within the range will depend on skills, experience, and qualifications.

Our Benefits

We care about your total well-being and will support you with the following, subject to your location and role.

• Health: Medical, dental and vision insurance, life insurance, employee assistance programs.
• Wealth: In addition to base pay, we offer 401(k) with company match (immediate vesting upon enrollment).
• Happiness:
  • Professional Growth: Online training courses, virtual and classroom development experiences, tuition reimbursement program
  • Work-Life Balance: Paid-time off and family leave

In compliance with applicable state and local pay transparency laws, we provide clear and equitable compensation information for all applicants.

SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law.

To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required.

This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company’s rights to assign or reassign duties and responsibilities to this job at any time.

If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call 2 for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Company/Location: Avtec Finishing / New Hope MN

Shift: 5a -3p M-Th (+OT as needed) That's a 4 day work week!

Pay: $21 /hr

Signing Bonus: $1500

(Employment/staffing agencies - please do not reach out about this ad. We only hire direct.)

____________________

Metal finishing and plating touches everything - medical devices, aerospace, defense, tools, hardware, and critical U.S. manufacturing. Most people don't know this industry exists. That's okay.

Our trade is not taught in schools. We'll train you!

What we can't train? Work ethic. Reliability. Initiative.

If you show up, stay focused, and want to grow - this is a real career path with long-term opportunity!

____________________

Attendance matters:

We rely on our team being here when scheduled. Our success depends on employees that show up to work. That means showing up every day, on time, and not leaving early. We reward strong attendance with bonuses!

Strict security protocols:

Personal mobile devices must be locked up during shifts (available only on breaks and in designated areas).

Warehouse environment: Exposure to heat, humidity, dust, and noise. This is hands-on, active work. We have a clean warehouse and are compliant with OSHA, Federal, and State regulations.

Career-oriented: Youll have the chance to grow with us if you bring a strong work ethic and initiative. Growth can be becoming an expert in the position, becoming a lead/trainer, changing departments, or going into a supervisor/manager role. It all depends on what interests the employee and the effort put forth by the employee.

We conduct in-person interviews only:

This position is located in Minnesota. We do not conduct virtual interviews. If you do not currently reside in MN, you must have definite relocation plans in place before being considered for an interview. There is a place to explain in the screener questions included with this ad.

____________________

What You'll Do (Entry Level Duties)

• Count, rack, and prepare parts for finishing
• Inspect parts for quality and accuracy
• Complete paperwork to ensure smooth processing
• Pack finished products to ship back to customers
• Follow safety and production guidelines in a fast-paced, hands-on warehouse environment

This is active workyoull be on your feet, using your hands, and staying focused. If you like staying busy and seeing tangible results of your efforts, youll thrive here!

____________________

What We're Looking For

• Reliable attendance and strong work habits (showing up matters hereyour team counts on you!)
• Ability to follow directions, and work safely
• Attention to detail
• Basic math and measuring skills
• Comfort with tools like rulers/tape measures and digital systems (computers/tablets)
• Teamwork and cooperative mindset
• U.S. work authorization
• MUST be able to speak, read, write, and understand English

____________________

What We Offer (Perks & Benefits)

We invest in people who invest in their work

• Competitive Pay and Signing Bonus)
• Work-Life Balance: 4-day work week (MonThurs) + overtime on Friday as needed
• Reviews & Raises: Performance reviews at 60 days, 6 months, then twice a yearraises available if expectations are met
• Bonuses: Quarterly profit-sharing + attendance rewards
• Paid Time Off: Holidays, PTO, Sick & Safe time, and an extra paid day off for your work anniversary
• Retirement Support: 401k with company contributions
• Insurance Coverage: Medical, Dental, Vision, Life insurance, Long-Term Disability, Pet, FSA, and more!
• Paid Extras: Uniforms, prescription safety glasses, safety boots, referral bonuses, and more

____________________

APPLICATION PROCESS:

• Upload a current resume & answer the questions provided (completing this task provides a little insight into you and helps us determine the best candidates to interview). Thoughtful answers are expected.
• No need to reach out and verify if the application was received. If you receive an email/text response when you submitted the application, then you'll know it was received. Contacting HR does NOT increase chances of an interview.
• If you are selected for an interview, you will be contacted via text/email. (As part of our selection process, while onsite for an interview, you MUST PASS A BASIC MATH TEST within 10 minutes to move on to the interview phase.)
• Expect a response within 14 days of your application.

____________________

Security: This position operates within a a secure manufacturing facility. All employees must adhere to strict security policies including restrictions on personal electronic devices, access control, and documentation procedures.

Equal Opportunity Employer. The Lindgren Group, including Avtec Finishing and Nico Products, is an equal opportunity employer and is committed to creating an inclusive environment for all employees. Veterans are encouraged to apply!

Work Authorization / Security Clearance:

The Lindgren Group must comply with ITAR (International Traffic in Arms Regulations). These regulations may restrict persons of non-US citizen status from working/participating/observing/or other forms of gathering knowledge about certain activities within the company.

Disclaimer:

This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time, with or without notice.

For more information on our company, visit:

Position Summary

Seeking an experienced Quality Manager to lead, develop, and continuously improve the quality function within a metals manufacturing environment, with a strong focus on cold drawing and roll forming operations. This role is responsible for ensuring products meet or exceed customer requirements and internal quality standards while supporting operational excellence, regulatory compliance, and continuous improvement initiatives.

Key Responsibilities

• Develop, implement, and maintain an effective Quality Management System (QMS) aligned with applicable industry standards (e.g., ISO 9001).
• Lead quality assurance and quality control activities supporting cold drawing and roll forming processes, from incoming material inspection through final product release.
• Establish quality objectives, system documentation (procedures, work instructions, control plans), and key quality metrics for critical processes.
• Oversee process monitoring, in-process inspection, statistical process control (SPC), and quality records to ensure consistent and measurable outcomes.
• Lead root cause analysis, corrective and preventive action (CAPA) activities, and structured problem-solving efforts (e.g., 8D, PDCA, DMAIC).
• Partner cross-functionally with Manufacturing, Engineering, Maintenance, and Supply Chain to resolve quality issues and drive continuous improvement.
• Manage customer quality concerns, non-conformances, returns, and supplier quality performance.
• Coach, train, and develop quality team members to ensure consistent application of quality standards and best practices.
• Conduct internal audits, manage calibration programs, and support external audit activities.
• Support new product and process qualification, validation, and change control activities where quality impacts exist.

Required Qualifications

• 5+ years of quality management experience in a manufacturing environment, including cold drawing and roll forming processes.
• Hands-on experience with quality systems, inspection methods, process control, and corrective action programs.
• Strong working knowledge of SPC, measurement systems analysis, and quality performance metrics.
• Ability to read and interpret engineering drawings, specifications, and GD&T.
• Proven problem-solving capability using structured root cause analysis methodologies.
• Demonstrated leadership experience with the ability to develop and mentor a quality team.
• Strong communication, organizational, and cross-functional collaboration skills.

Preferred Qualifications

• Bachelor’s degree in Engineering, Manufacturing, Materials Science, or a related technical field.
• Quality certifications such as Six Sigma (Green/Black Belt), Certified Quality Engineer (CQE), or equivalent.
• Experience implementing and maintaining ISO 9001 quality systems.

Physical & Work Environment

• Ability to work in a manufacturing environment with exposure to noise, industrial equipment, and varying temperatures.
• Occasional lifting of inspection tools and equipment may be required.