Difference Between Embark And Wisdom Panel Jobs in Usa

Power the data centers, hospitals, and other mission-critical facilities of tomorrow-designing both rugged rental products and stationary generator-set packages that keep them online. As an Electrical Project Engineer, you'll work in a unique manufacturing and dealer environment, leveraging expert-level AutoCAD and Inventor skills to craft low- and medium-voltage AC layouts, DC controls, and the logic that ties multiple gensets into advanced paralleling switchgear and smart control panels. Juggle multiple high-impact projects, troubleshoot in the test cell, and serve as the go-to authority for production teams and customers alike-making an outsized impact alongside a collaborative squad of engineers, sales pros, and suppliers.

• Produce comprehensive wiring schematics, conduit schedules, and panel layouts in AutoCAD and Inventor for diesel and natural gas gensets, ensuring every reference, layer, and legend is unambiguous.

• Size and specify breakers, relays, PLC/HMI hardware, and interface circuits that integrate seamlessly with low to medium-voltage paralleling switchgear and DC control systems.

• Audit project drawings, vendor prints, and specifications against UL, NFPA 70/110, ISO, and customer standards; log variances and close them before release.

• Diagnose elusive startup, commissioning, and controls problems for technicians through root-cause-based recommendations that feed back into design libraries to improve the product.

• Translate application questions into concise recommendations and solutions and document in formal engineering notes.

• Maintain production continuity
  • Follow standard protocols and proven design protocols to ensure consistent high-quality products that meet or exceed customer requirements.
• Manage the submittal dossier
  • Assemble, index, and track all drawings, studies, and data sheets through the approval cycle; document every revision for full traceability.
• Leverage Caterpillar engineering resources
  • Retrieve and interpret factory application guides, PID data, and software updates; ensure the latest revisions are embedded in each project.
• Enable precise estimating
  • Deliver dimensioned one-lines, BOMs, and labor take-offs to the Sales team so quotes reflect real scope, margin, and risk.
• Design for the exceptional case
  • Apply first-principles analysis to bespoke components or control sequences required by unique site conditions or regulatory environments.
• Control the critical path
  • Use tools and milestone checklists to keep engineering actions on time, document slippage causes, and propose corrective actions proactively.
• Adapt as requirements evolve
  • When priorities shift, re-baseline drawings, calculations, designs, and priorities so the entire team works from a single source of truth.

If precision, thorough documentation, and methodical problem-solving are how you create value, this role will let you practice your craft at a high level of electrical engineering discipline.

Education & Experience

• B.S. in Electrical Engineering (preferred) - or at least ten years of hands-on experience in the engine-driven power-generation industry or a closely related technology field with design engineering experience for 5+ years.
• Military veterans are strongly encouraged to apply.

Technical Expertise

• Proficiency with Caterpillar toolsets (CAT ET, CAT Monitoring Software, SIS Web, TMI, EDDC) is highly desirable.
• Working knowledge of diesel- and natural-gas generator sets is preferred; familiarity with lithium-ion energy-storage systems is a plus.
• Thorough understanding of relevant codes and standards-NFPA 70/110, NEC, NEMA, UL, IEEE.
• Expert-level 2D drafting in AutoCAD; 3D modeling experience required (Inventor preferred, or comparable platforms accepted).
• Exposure to generator paralleling switchgear, remote-fuel supply, and remote-cooling systems is preferred.

Other Requirements

• Valid driver's license with a clean record (no more than two minor violations in the last three years and no major violations in the last five years). A motor vehicle driving record check will be conducted for the final candidate.

Altorfer Inc. offers an industry leading compensation and benefit package:

* Health, Dental, Vision, Disability, and Life Insurance
* 401(k)
* Paid Holidays
* Paid Parental Leave and Funeral Leave
* Paid Time Off: Prorated 80 hours of PTO + 1 Floating Holiday
* Education Assistance
* Personal Tool Insurance, and Safety Equipment Reimbursement
* Voluntary Benefits: Supplemental Insurance, Accident, Critical and Hospital Indemnity Insurance, Legal Assistance and Identity & Fraud Protection

Salary Range: $60K to $120K annually

Work is normally performed both indoors and outdoors with moderate noise conditions. Limited exposure to all weather conditions is associated with this position. Physical requirements may include speaking, listening, writing, typing, reaching, pushing, pulling, lifting, carrying, sitting for extended periods, and managing stress. Occasionally required to walk or stand for short durations on manufacturing floors or job sites. Job hazards may include tripping, slipping, falling, jobsite hazards, hand injuries, driving related hazards, equipment movement, overexertion due to stress and fatigue. Required to follow all safety protocols and wear appropriate personal protective equipment depending on the environment or location. The noise level in the work environment is usually moderate to high. The noise level in the office environment is usually moderate to low. Must be flexible to work varying schedules and hours as needed. Occasional travel may be required. The physical demands described above are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Why Work for Altorfer?

At Altorfer, our iron is just the beginning. Our people make our company successful, and we would not be who we are without them. As a third-generation, family-owned company created in 1957, we bring our values into how we do business. Everyone from technicians, sales representatives, administrative professionals, or somewhere in between is part of the "A-Team" and is critical to our success. Here at Altorfer, we have over 35 locations and 1300 employees with long tenure for you to learn from. We have a collaborative, family-valued culture, with a great reputation in the industry. A company that offers competitive pay, excellent benefits, and a remarkable team of people to work with.

Lead Security Technician

Location: Charleston, SC

Schedule: Full-time (typical construction hours; may vary by project)

Position Overview

We are seeking an experienced Lead Security Technician to support commercial security system installations across projects in the Charleston, SC area. This is a hands-on leadership role responsible for overseeing field crews, ensuring high-quality installations, and coordinating with project stakeholders to deliver successful security system deployments.

The ideal candidate brings strong experience in access control, CCTV, intrusion systems, door hardware, and structured cabling, along with the ability to lead teams and maintain professional jobsite standards.

Key Responsibilities

Field Leadership

• Lead and supervise installation teams on active job sites
• Assign daily tasks and ensure productivity and quality standards are met
• Serve as the primary point of contact between field teams and project leadership
• Maintain jobsite organization, safety compliance, and workflow efficiency

Security System Installation

• Install, terminate, and troubleshoot:
• Access control systems
• CCTV / IP camera systems
• Intrusion detection systems
• Install and wire door hardware including:
• Electric strikes
• Maglocks
• Door contacts
• Request-to-exit (REX) devices
• Card readers and keypads

Cabling & Infrastructure

• Pull, route, terminate, and test:
• Cat5e / Cat6 / Cat6A
• Composite access control cable
• Coax and low-voltage cabling
• Perform clean cable dressing, labeling, and pathway management
• Build and wire panels, enclosures, and head-end equipment

System Integration & Testing

• Assist with panel terminations and device integrations
• Support system testing, commissioning, and troubleshooting
• Ensure all installations meet project specifications and code requirements

Documentation & Communication

• Read and interpret blueprints, riser diagrams, and scopes of work
• Provide daily progress updates to project managers or supervisors
• Track materials, report issues, and coordinate solutions in real time

Required Experience

• 5+ years of experience in low-voltage / security system installation
• Proven leadership experience as a Lead Technician or Foreman
• Strong background in:
• Access control systems
• CCTV / surveillance systems
• Structured cabling and terminations
• Door hardware installation

Preferred System & Brand Experience

Experience with one or more of the following platforms is highly preferred:

• Access Control: Lenel, LenelS2, Software House (CCURE), Genetec, Avigilon, Brivo, AMAG, Honeywell, Openpath
• CCTV / VMS: Avigilon, Genetec, Milestone, Hanwha (Wisenet), Axis
• Intrusion Systems: Bosch, Honeywell, DSC, DMP

Technical Skills

• Strong understanding of low-voltage wiring and system architecture
• Experience with panel wiring and device integration
• Ability to troubleshoot systems independently
• Proficient in reading prints and executing scopes with precision

Requirements

• Valid driver’s license and reliable transportation
• Ability to pass background check (required for secured sites)
• OSHA 10 (preferred but not required)
• Ability to lift 50+ lbs, climb ladders, and work in construction environments

Tools & PPE

• Must have own basic hand tools (termination tools, drills, testers, etc.)

• 
  
• Assembling and wiring completely aircraft electrical, radio, and radar units such as main junction and terminal boxes, main engine disconnect plug, main control, switch panels, radio panels, and instrument panels
  
• Completing hookup of wiring, flexes, and cables, and troubleshooting electrical and radio assemblies having multiple interconnected units and accessories
  
• Forming and running harnesses, breaking out and terminating wiring to terminal points where wire routing and location of electrical units and accessories are established by jig board layouts
  
• Making continuity checks (including necessary operation) of above assemblies and harnesses as required, and selling same to inspection
  
• Fabricating completely hi-voltage radio and radar cables that require the soldering of multiple wires, shields, tubes, connectors, pins, washers, spacers, and cores
  

KR SOLAR is seeking skilled and experienced Solar Installers to join our team. As a Solar Installer, you will be responsible for the installation and maintenance of solar energy systems for residential and commercial properties. You will work closely with our customers and other team members to ensure the safe and efficient installation of solar panels, inverters, and related equipment.

At KR SOLAR, we are committed to providing high-quality and reliable solar solutions to our customers. Our goal is to help them reduce their energy costs and make a positive impact on the environment. Join us and be part of a team that is at the forefront of the renewable energy industry, shaping the way we generate and consume electricity.

• Install solar panels, inverters, and other solar energy system components
• Evaluate site conditions and determine the best placement for solar panels
• Work safely and follow industry standards and guidelines
• Conduct electrical work, including wiring and connecting solar system components
• Perform routine maintenance and troubleshooting of solar energy systems
• Collaborate with team members to ensure timely and accurate project completion
• Provide exceptional customer service and address any customer concerns or questions

• Assemble sheet metal components, mechanical sub-assemblies, motors, and blowers according to work instructions and engineering specifications.

• Install completed assemblies and sub-assemblies into units, ensuring proper alignment, fit, and function.

• Insert and secure insulation materials into metal panels following safety and quality standards.

• Use hand tools, power tools, and production equipment to perform assembly operations accurately and efficiently.

• Read and interpret blueprints, diagrams, work orders, and production schedules to determine assembly requirements.

• Perform quality checks to ensure assemblies meet established standards and resolve basic assembly issues as they arise.

• Maintain a clean, organized, and safe work area while following all safety policies and procedures.

• Communicate any material shortages, equipment issues, or process concerns to supervisors promptly.

• Support continuous improvement efforts by identifying opportunities to enhance quality, efficiency, and safety.

• Follow all standard operating procedures (SOPs) and production guidelines.

• Perform other duties as required.

• High school diploma or equivalent preferred.

• Prior manufacturing or assembly experience preferred but not required.

• Ability to read and interpret basic blueprints, diagrams, and work instructions.

• Familiarity with hand tools, power tools, and basic mechanical assembly practices.

• Strong attention to detail with the ability to perform tasks accurately and consistently.

• Ability to stand, lift, bend, and perform repetitive tasks for extended periods.

• Demonstrated ability to work both independently and as part of a team.

• Good communication skills and willingness to ask questions and seek guidance when needed.

• Ability to work in a fast-paced environment and meet production deadlines.

• Basic understanding of safety procedures and commitment to safe work practices.

• Experience in a manufacturing environment involving sheet metal, mechanical assembly, or HVAC components.

• Ability to operate basic production equipment or machinery.

• Experience working with insulated panels, motors, or blower assemblies.

• Knowledge of lean manufacturing or continuous improvement principles.

• Forklift or pallet jack experience (if applicable to the facility).

• Travel is not required for this role

• Customer Focus

• Operational Excellence

• High-Performance Culture

• Innovation

• Financial Strength

• Own It

• Act With Urgency

• Foster a Customer-First Mindset

• Think Big and Execute

• Lead by Example

• Drive Continuous Improvement

• Learn and Seek Out Development

• Promote Transparent & Open Communication

• Set up, operate, and monitor large grinding machines used for processing materials
• Adjust machine settings to accommodate different types of materials and achieve desired output sizes.
• Load recyclable materials into the grinding machine, ensuring proper placement and securing of materials to prevent blockages or malfunctions.
• Perform routine maintenance and cleaning of the grinding machine to ensure optimal performance and prevent downtime and coordinate with maintenance personnel for more complex repairs or service needs.
• Identify and address any mechanical issues or wear and tear on the equipment.
• Monitor the quality of the ground materials, ensuring they meet specifications and standards for further processing.
• Conduct periodic checks verify the consistency and quality of the output.
• Follow all safety protocols and guidelines while operating the grinding machine and handling materials and report any safety hazards or incidents to the supervisor and participate in safety training as required. Always wear PPE
• Maintain accurate records of production volumes, equipment maintenance, and any issues encountered during the grinding process.
• Diagnose and resolve minor operational issues with the grinding machine, including jams, misalignments, or malfunctions.
• Participate in process improvement initiatives to enhance the efficiency and effectiveness of the recycling operation.
• Suggest and implement changes to optimize machine performance and reduce waste.
• Continual communication and collaboration with team members, team leads, and Supervisors.
• Report to work at the scheduled time, work as scheduled and is seldom absent from work.
• This job description is intended to provide an overview of the responsibilities and requirements of the position. It is not an exhaustive list. Furthermore, nothing in this job description restricts managements right to assign or reassign duties and responsibilities to this position at any time.

Knowledge/Skills/Abilities

• Proficiency in operating and maintaining large grinding machines and other related equipment.
• Strong problem-solving skills and the ability to troubleshoot machine issues.
• Good understanding of safety procedures and environmental regulations related to recycling processes.
• Experience with specific types of recycling materials or grinding processes relevant to the industry preferred
• Willingness and ability to work a 12 hour shift schedule with evening/weekend work (Week 1:M/T/F/Sa, Week 2: Su/W/TH).

Education/Experience/Certifications/Licenses

• High school diploma or equivalent preferred
• Forklift Certification through King Plastic Corp required

Typical Physical and Mental Demands/Work Environment: Work is primarily performed in a manufacturing facility and occasionally seated in an office. May involve working under deadlines. Requires: broad range of physical and mental activities to perform the duties and responsibilities of the position:

• You will be required to stand and walk for 11+ hours/day, drive a forklift for 0.5+ hours/day, constant engage in overhead reach, forward reach, climb, bend, kneel, squat, stoop, twist, use manual dexterity, make position changes, push and pull using both arms and legs, lift and carry 525 lbs., wear protective equipment, repetitive motion, maintaining physical endurance, demonstrate attention to detail, use memory recall, effective communication, adaptability, depth perception, color vision, visual acuity, frequent problem solving, lift and carry 2651+ lbs., and hear clearly. Typical tools, equipment, and machinery utilized include saws (table, panel, and radial arm), routers, grinders, manual and power hand tools, overhead lift equipment, micrometers, tape measure, scales, air hoses, calculators, and computers. The position involves full shifts in an environment with extreme temperatures exceeding 100F during summer months and exposure to noise and dust.

Position requires full shifts in an environment with extreme temperatures (>100? in summer months): Yes

Position requires full shifts in an environment with exposure to noise and dust: Yes

Typical tools, equipment and machinery utilized: saws (table, panel and radial arm), routers, grinder, manual and power hand tools, overhead lift equipment, micrometers, tape measure, scales, air hoses, calculator, and computer: yes

Position requires operating a power fork truck: Yes

PI68d0d1d032e1-26289-39745171

A Nassau County Hospital is looking for a Faculty Family Medicine physician.

Teach academics, precept and have own patient panel.

Hospital will provide a competitive salary + full benefits.

Job Function: Supervise and teach Family Medicine residents.

Will teach in outpatient and inpatient setting.

80% clinical and 20% admin/academic.

2
- 1/2 days for academic admin.

6-8 1/2 days of clinical precepting.

2- 1/2 days of direct patient panel.

Can be flexible with the precepting- direct patient panel mix.

Will have a faculty appointment.

As a physician, you likely got into medicine so you could provide quality care.

With overwhelming and sometimes unmanageable patient panels, it can seem nearly impossible to focus on quality transformational care.

Are you currently missing that?As an organization, we are driven to positively impact patient health outcomes with our revolutionary full-risk model.

Being a truly physician led, value-based organization, our success is derived from our patients success in health and wellness.

Our physicians are making strides and bringing awareness to the VIP, humanized form of care that we practice, and not focusing specifically on volume and treating each patient like a number.

Were helping the neediest populations live 5-7+ years longer! Lead the change in patient centric care with the following goals:- Emphasize and manage prevention and not just treatment- You and your team are devoted to providing holistic care to each one of your patients.

From ensuring they have adequate transportation, to helping measure and break down quality of life deterrents Improve access to health services for the vulnerable populations we serve- Be rewarded physically, mentally, and financially as the difference maker in these patients livesWhat to Expect as a ChenMed Physician:- Monday
- Friday NO nights or weekends- Very light triaged telephonic call only- Smaller patient panel (max 450), see members monthly vs annually
- Physician-led organization- RVU's are a thing of the past.

Be rewarded for better patient outcomes!Ready to learn more about revolutionizing healthcare?Text your name and Value Based Care to Valentina or email are hiring throughout FL and the U.S.

if Lauderhill, FL is not your preferred location.

Insight Global is seeking an experienced EPLAN Electrical Designer to support the development of its large-scale metal additive manufacturing platform, the Advanced Test Demonstrator (ATD).

In this role, you will play a critical part in electrical documentation, panel fabrication support, and system integration activities for a complex LPBF (laser powder bed fusion) 3D printer environment. This includes creating and updating EPLAN schematics, supporting hands-on panel builds, documenting wiring and fluid routing, and collaborating with cross-functional engineering teams (controls, mechanical, and R&D).

The ideal candidate is highly experienced in mixed-voltage electrical systems, industrial standards, and shop-floor integration. This is a hands-on role requiring strong troubleshooting, fabrication support, and comfort working around high-power distribution and sensitive signal environments. While not required, experience with LabVIEW OOP and industrial additive manufacturing systems is highly advantageous.

Qualifications

Required Skills & Experience

• 10+ years of electrical design experience
• Proficiency with EPLAN Electric P8 for electrical schematics, wiring diagrams, harness documentation, and connector pinouts
• Experience supporting panel fabrication and providing real-time troubleshooting for mixed-voltage enclosures
• Experience updating as-built documentation from shop-floor redlines
• Strong knowledge of industrial electrical standards (UL, CE, NEC, NFPA)
• Strong wiring, layout, and enclosure integration skills for R&D or industrial machine environments

Nice to Have Skills & Experience

• Experience with EPLAN Fluid for documenting chiller loops, pneumatics, and gas routing
• LabVIEW OOP experience
• Background in additive manufacturing, large industrial printers, or automation equipment
• Familiarity with pneumatic manifolds, argon systems, or fluid-cooled industrial machinery
• Experience coordinating electrical requirements within CAD enclosure models
• Comfortable working on shop floors with high-power distribution and sensitive signal routing

PrideNow is seeking an experienced Maintenance Electrician to join our team in a full-time, direct hire role. This position requires a highly skilled professional capable of performing complex industrial electrical maintenance in a manufacturing environment. Candidates with journeyman-level experience or 7–10 years of industrial electrical experience are strongly encouraged to apply.

Shifts Available:

• 2nd Shift: Monday–Friday, 2:00 PM–10:00 PM
• Pay Rate: $34.25/hr. plus $1 shift differential for 2nd shift
• Comprehensive benefits package to include Medical, Vision, Dental, PTO, 401k + Match, FSA etc.

Job Responsibilities:

• Identify electrical hazards and safely isolate, ground, and prepare circuits and equipment for repair.
• Use required PPE to protect against arc flash and electrical shock.
• Read, interpret, and troubleshoot from blueprints and schematics, including 240V and 480V three-phase systems.
• Troubleshoot and maintain motor control centers, motor start circuits, control loops, generators, high-voltage switchgear, protective relays, and related equipment.
• Install, calibrate, and maintain electrical apparatus using engineering drawings and manuals.
• Install conduit, pull wiring, and perform proper terminations.
• Use electrical and electronic testing equipment such as multimeters, ammeters, megohm meters, high-potential testers, oscilloscopes, and digital probes.
• Install and maintain electrical distribution and control equipment including switches, relays, circuit breakers, and panels.
• Install and maintain drive systems including VFDs, eddy current drives, and DC drive systems.
• Perform installation, maintenance, and troubleshooting of PLC systems, including point-to-point wiring and equipment replacement.
• Install and calibrate pressure, temperature, flow, and level control devices.
• Observe operating systems to detect hazards and determine need for adjustments or modifications.
• Design and lay out control panels, set up complex control systems, and modify engineering drawings when required.
• Repair or replace faulty electrical equipment, including electronic controls, motors, meters, outlets, and panels.
• Document work performed and communicate issues, irregularities, and ongoing needs to the team.
• Maintain a safe and clean work environment following all procedures and regulations.
• Communicate effectively to resolve electrical problems.
• Assist in training line mechanics and apprentices as needed.
• Use the computerized maintenance management system (CMMS) to enter and retrieve information.
• Follow safe work practices at all times and ensure work does not endanger others.
• Perform additional duties as needed.

Additional Requirement:

• Physical examination is required.
• Must be able to train on 1st shift for 1-2 weeks if needed
• Journeyman or electrical license preferred or 5+ years of experience as an electrician in a manufacturing plant

#SM