Deckorators Railing Brackets Jobs in Usa
445 positions found — Page 32
N
Electrical Technician
Salary not disclosed
Must possess your own tool set.
Schedule: -F, OT as needed
- 6:45am
- 3:30pm To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Job Summary: The Electrical Technician II will build, rework, test, repair, and install wiring harnesses on vehicles and the bench.
The role will follow instructions from blueprints, bill of materials (BOM), schematics, and piping and instrumentation diagrams (P&ID).
The role will follow procedures to set up and run quality checks on various wiring harnesses.
The Electrical Technician II will perform independent project tasks and collaborate with customers and team members.
Essential Duties and Responsibilities: • Assemble, install, perform functional and safety tests and reverse engineer on wiring using hand tools and proper assembly techniques by following work instructions (prints, cut sheets, sample harnesses).
• Install lights, brackets, and electrical hardware to special test boxes, automotive components, and vehicles according to specifications.
• Test wiring and components for correct operation using a schematic and diagnostic equipment.
• Perform wiring reworks and repairs on bench and vehicle, crimp and solder, de-pin terminal, create basic schematics and reverse engineer harnesses.
• Keep shop equipment operating by following operating instructions, troubleshooting breakdowns, performing preventive maintenance, calling for repairs.
• Participate in daily shop organization and clean-up.
Education and Experience (required): • High school diploma or equivalent.
• Minimum of 4 years of electrical work experience.
Education and Experience (preferred): • Certificate in Automotive Electrical Technology or related.
• Valid driver's license.
• Experience installing components on circuit boards.
• Experience with automotive powertrain systems or electric battery systems.
Skills, Knowledge and Abilities (required): • Mechanical aptitude with basic understanding of automotive systems and ability to crimp and solder wires.
Proficient with hand and power tools and able to operate vehicle lifts.
• Proficient electrical and electronic troubleshooting skills and the ability to understand electronic schematics and electronic part documentation.
• Effective written and verbal communication skills.
• Knowledge of MS Office programs including Word, Excel, and Outlook.
• Able to work overtime and weekends.
Skills, Knowledge and Abilities (preferred): • Broad knowledge of vehicle systems (powertrain, chassis, electrical, thermal, exteriors, interiors, etc.) and related components, component materials & fasteners.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Schedule: -F, OT as needed
- 6:45am
- 3:30pm To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge, skill, and/or ability required.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.
Job Summary: The Electrical Technician II will build, rework, test, repair, and install wiring harnesses on vehicles and the bench.
The role will follow instructions from blueprints, bill of materials (BOM), schematics, and piping and instrumentation diagrams (P&ID).
The role will follow procedures to set up and run quality checks on various wiring harnesses.
The Electrical Technician II will perform independent project tasks and collaborate with customers and team members.
Essential Duties and Responsibilities: • Assemble, install, perform functional and safety tests and reverse engineer on wiring using hand tools and proper assembly techniques by following work instructions (prints, cut sheets, sample harnesses).
• Install lights, brackets, and electrical hardware to special test boxes, automotive components, and vehicles according to specifications.
• Test wiring and components for correct operation using a schematic and diagnostic equipment.
• Perform wiring reworks and repairs on bench and vehicle, crimp and solder, de-pin terminal, create basic schematics and reverse engineer harnesses.
• Keep shop equipment operating by following operating instructions, troubleshooting breakdowns, performing preventive maintenance, calling for repairs.
• Participate in daily shop organization and clean-up.
Education and Experience (required): • High school diploma or equivalent.
• Minimum of 4 years of electrical work experience.
Education and Experience (preferred): • Certificate in Automotive Electrical Technology or related.
• Valid driver's license.
• Experience installing components on circuit boards.
• Experience with automotive powertrain systems or electric battery systems.
Skills, Knowledge and Abilities (required): • Mechanical aptitude with basic understanding of automotive systems and ability to crimp and solder wires.
Proficient with hand and power tools and able to operate vehicle lifts.
• Proficient electrical and electronic troubleshooting skills and the ability to understand electronic schematics and electronic part documentation.
• Effective written and verbal communication skills.
• Knowledge of MS Office programs including Word, Excel, and Outlook.
• Able to work overtime and weekends.
Skills, Knowledge and Abilities (preferred): • Broad knowledge of vehicle systems (powertrain, chassis, electrical, thermal, exteriors, interiors, etc.) and related components, component materials & fasteners.
Nesco Resource offers a comprehensive benefits package for our associates, which includes a MEC (Minimum Essential Coverage) plan that encompasses Medical, Vision, Dental, 401K, and EAP (Employee Assistance Program) services.
Nesco Resource provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.
Not Specified
A
Mechanical Design Engineer, Propulsion Integration
🏢 Apera
Salary not disclosed
Industry: Hybrid-Electric Aerospace / Advanced Aviation
Location: San Jose
About:
This role sits within a clean-sheet propulsion and vehicle integration programme based in California.
It is not a minor modification effort. The team is rethinking propulsion architecture at aircraft level, including generator integration, high-power electronics, energy distribution, and advanced thermal management, layered onto an existing aircraft platform.
The programme also carries a defence-focused dimension, with applications spanning ISR, distributed operations, and mission-adaptable configurations. Technically, this is a multidisciplinary systems integration challenge suited to engineers who want ownership at vehicle level rather than remaining at isolated component level.
Responsibilities:
- Lead the design of structural elements and oversee propulsion system integration on full-scale prototype aircraft
- Develop detailed metallic components and assemblies supporting propulsion attachment, structural interfaces, and overall system integration
- Take ownership of the end-to-end prototype lifecycle including requirements definition, design, BOM creation, sourcing, assembly, and validation
- Carry out structural calculations and hand analyses to validate load paths, safety margins, and interface performance
- Perform finite element analysis on metallic structures and mounting systems to ensure design robustness
- Engage with external suppliers to evaluate and select suitable COTS hardware such as mounts, brackets, and fastening solutions
- Define and execute verification and validation test strategies, ensuring designs are proven through rigorous testing
- Produce and review detailed engineering drawings, specifications, and technical documentation
- Contribute to requirements capture, development, and traceability documentation
- Manage supply chain activities and drive procurement efforts for owned hardware
- Work closely with cross-functional engineering teams across multiple disciplines
Required Experience & Skills:
- 5–15 years of relevant engineering experience
- Bachelor’s degree in Mechanical Engineering or related discipline
- Experience integrating and/or designing flight-critical hardware attached to primary aircraft structure
- Strong proficiency in CAD tools such as NX or SolidWorks, with NX preferred
- Experience managing large CAD assemblies within PLM environments such as Teamcenter
- Solid understanding of load analysis, free body diagrams, and FEA methodologies
- Demonstrated experience designing complex metallic components and welded assemblies
- Strong knowledge of GD&T and creation of manufacturing-ready drawings
- Familiarity with aerospace hardware specifications and standards
- Hands-on engineering experience across multiple technical domains, particularly metallic and composite structures
- Clear and effective communication skills
Desirable / Additional Qualifications:
- Degree in Aerospace, Mechanical, Electrical Engineering, or equivalent technical field
- Experience working with electric propulsion, powertrain systems, or broader aerospace systems
- Strong understanding of full product development cycles including design phases, manufacturing, and global supply chain coordination
- Experience using tools such as Jira and Confluence for project tracking and documentation
- Background supporting vehicle development from early prototype phases through certification and production
- Familiarity with Part 23 certification requirements and/or ARP4754A processes
Not Specified
S
MRB Engineer
Salary not disclosed
About the Company:
Premier Aerospace Engineering Opportunity! With over 60 years of pedigree and 1,400 employees across 20 locations worldwide, Sogeclair is a leading aerospace company that specializes in design, manufacturing, integration and certification of structures, interior components, and systems. Sogeclair Digital Engineering, a subsidiary of Sogeclair, is an established US based aerospace engineering service company, partnering with cutting edge aerospace OEMs. We provide exciting long term opportunities for diverse programs, including project based services and on-site at our customer locations. We are looking for motivated individuals with a passion for engineering to join our team!
Responsibilities:
- Performs analysis to identify and evaluate the quality of non conformance notifications and to verify or validate compliance with Quality Management System requirements, applicable company procedures, contract requirements, or government regulations.
- Verify and take actions required to confirm customer contractual requirements are met for dispositioning and reviewing non conformances as a delegated member of the Material Review Board (MRB) such as requirements for corrective action, structurally and functionally.
- Use as is dispositions, acceptable rework/repair, and suspected delivered discrepancies.
- Monitor/Audit MRB crib inventory records and ensure actions are taken by crib owners to ensure compliance.
- Monitor and maintain quality notification records to prevent aging.
- Supporting supplier parts ie. components and brackets.
Qualifications:
5+ years of MRB stamping authority experience on Boeing platforms. Familiar with Boeing processes and specifications is a plus. General knowledge on reading stress reports.
Not Specified
R
Outside Sales Representative
Salary not disclosed
Outside Sales Representative
Warwick, Rhode Island
$90,000 - $110,000 + Excellent Training + Technical Progression + Overtime + Company Truck + Healthcare + 401(k) + Holiday
Are you a Sales Rep from a Construction/Engineering Service Sales background looking to transition into a position with uncapped commission? Are you looking to receive full industry training and become an expert through external courses and certifications?
On offer is an opportunity to maximise your earnings with uncapped commission. This company will give you full industry training and invest in you with regular internal and external training courses to get specialized certifications to become a technical expert.
This award-winning company specialize in facilities maintenance of residential and commercial door equipment for customers in various markets and sectors. Due to continual market dominance and exciting growth plans, they are now seeking several Service Sales Reps to join and further their client base.
In this role you will be given a generous weekly base and be paid commission monthly for prospecting Garage Door Instillation sales. Starting off inside getting trained from industry experts before moving outside, going on site to quote jobs servicing, maintaining and installing residential/commercial doors and loading/dock bay equipment. You will be paid for your travel time and your fuel will be covered by the company.
This is a great chance to join a market leading business that is offering full industry training and uncapped commission to highly motivated individuals with further progression available.
The Role:
- Service Sales (cold/warm calls/site visits/networking/referrals)
- Residential or Commercial garage door instillation sales around Rhode Island
- Excellent training, career progression, Commission and company package available
The Person:
- Construction/Engineering/Service sales background
- Someone confident to do prospect sales
- Eager to receive training, progress and looking for a long-term career.
To apply for this role or to be considered for further roles, please click "Apply Now" or contact Ewart at Rise Technical Recruitment.
Rise Technical Recruitment Ltd acts an employment agency for permanent roles and an employment business for temporary roles.
The salary advertised is the bracket available for this position. The actual salary paid will be dependent on your level of experience, qualifications and skill set. We are an equal opportunities employer and welcome applications from all suitable candidates.
Not Specified
T
Manufacturing Engineer
Salary not disclosed
Company Description
Thermal Structures, established in 1951, is a world-class manufacturer specializing in custom fabricated insulation blankets, heat shields, fire shields, composite structures, metallic, and silicone seals. Our products are used in aerospace and industrial applications to protect engines, ducting, valves, and other mechanical equipment. Based in Corona, CA, we pride ourselves on our NADCAP-approved composites manufacturing facility and ISO 9001 and AS9100 certifications. Additionally, we produce lightweight, non-metallic structures for aerospace applications and operate a metal bracket manufacturing facility at our Corona complex.
Role Description
The responsibility of the Manufacturing Engineer is to carry out the goals of the Engineering department under the direction of the Engineering Manager. As a Manufacturing Engineer where you will be at the forefront of driving innovation and efficiency in our manufacturing processes. As a key member of our team, you will be instrumental in enhancing our production capabilities and ensuring the highest standards of quality and precision. The following is a list of tasks which are included in the Manufacturing Engineer:
- Review, follow and advise on operational processes and detect areas that can be improved
- Work with maintenance team to maximize efficiencies and develop a pro-active plan to eliminate non-value activities and reduce scrap
- Support plant operations on equipment related issues that come up in the plant and helps insure smooth plant operation
- Manage execution and timely completion of engineering projects by analyzing scope and determining project specifications
- Prepare all documents needed
- Support project engineers
- Relies on experience and judgment to plan and a degree of creativity and latitude is required.
- Reading specifications, validate designs
- Additional responsibilities may be assigned by the Engineering Manager
Minimum qualifications and experience requirements:
- Bachelor's Engineering degree or equivalent experience in previous positions.
- Read, write and speak English proficiently, with Spanish language helpful
- Proven ability to analyze and troubleshoot production processes
- Strong interpersonal skills with the confidence to interact and communicate effectively with personnel from all levels of the organization
- Ability to work both in office and on the plant floor, in hot and cold conditions, standing / walking at least 4 hours per day
Company Description
- Thermal Structures, a subsidiary of HEICO, is an industry-leading provider of insulation and composite products, backed by support that consistently exceeds customer expectations. We design and manufacture solutions that deliver superior performance in the most complex and demanding applications. From concept to completion, we have the resources to meet this challenge with world-class quality and value.
Thermal Structures, Inc. is a VEVRAA Federal Contractor, offering preference to protected veterans for its job openings, AAP, EEO
Salary (exempt) position
Compensation: $70,304-$92,000 annually
Not Specified
Radiology Technologist Assistant - Pulmonary (Hiring Immediately)
Salary not disclosed
Description Summary: The Radiology Technologist Assistant provides continuous support of patient flow through the medical imaging department by transferring patients to and from units to the department as directed. Follows departmental guidelines while transporting patients. The patient is protected from possible injury using side rails. Patient privacy is protected by fully covering the patient; the patient's dignity and comfort are always considered. Assists personnel in the department in moving patients, holding patients, and preparing patients for exams as well as setting up necessary supplies/equipment on a sterile field for procedures. Helps clean aprons, gloves, and accessories as required. Assists with order entry/data processing, report retrieval, and CD burning as needed. Behavior and communication skills must align with the organization's mission, values, and culture.
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Demonstrates adherence to the Core Values of CHRISTUS Health.
Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
Coordinates/prioritizes imaging procedures throughout the workday, maintaining a high level of patient care and continuity.
Performs examinations/procedures as needed to assist in patient throughput.
Ensures exam rooms are neat, clean, and adequately stocked before exams are performed.
Demonstrates flexibility by working other shifts and at other campuses as needed or required.
Ensures completed exams are scanned and stored correctly in PACS.
Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
Troubleshoots and reports any equipment malfunctions to the Director/Manager/Supervisor and/or Biomedical personnel; does appropriate follow-up.
Performs other duties as assigned.
Job Requirements:
Education/Skills
~ High School Diploma or equivalent required
Experience
~1 year of experience working in medical imaging preferred
~ Basic computer experience required
Licenses, Registrations, or Certifications
~ BLS Required
Work Schedule:
8AM - 5PM Monday-Friday
Work Type:
Full Time
Responsibilities:
Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders.
Demonstrates adherence to the Core Values of CHRISTUS Health.
Maintains consistency with Administrative and Departmental policies with appropriate behavior, dress, attitude, attendance, confidentiality, professionalism, and reliability.
Promotes staff growth, development, and employee engagement by collaborating with management, coworkers, and physicians to create an optimal work environment.
Promotes exceptional physician satisfaction by providing meaningful assistance to radiologists and referring physicians.
Performs all duties in a manner that protects the confidentiality of patients and does not solicit or disclose any confidential information unless it is necessary in the performance of assigned job duties.
Appropriately adapt assigned patient assessment, treatment, and/or care methods to accommodate the unique physical, psychosocial, cultural, spiritual, age-specific, and other developmental needs of each patient served.
Ensures compliance with all policies, procedures, and standards of care as deemed appropriate by State and Federal agencies, the hospital, and other regulatory entities.
Coordinates/prioritizes imaging procedures throughout the workday, maintaining a high level of patient care and continuity.
Performs examinations/procedures as needed to assist in patient throughput.
Ensures exam rooms are neat, clean, and adequately stocked before exams are performed.
Demonstrates flexibility by working other shifts and at other campuses as needed or required.
Ensures completed exams are scanned and stored correctly in PACS.
Ability to follow PACS downtime procedures as a PACS Superuser and escalate any problem(s) or issue(s) to the PACS administrator or Designee if needed.
Troubleshoots and reports any equipment malfunctions to the Director/Manager/Supervisor and/or Biomedical personnel; does appropriate follow-up.
Performs other duties as assigned.
Job Requirements:
Education/Skills
~ High School Diploma or equivalent required
Experience
~1 year of experience working in medical imaging preferred
~ Basic computer experience required
Licenses, Registrations, or Certifications
~ BLS Required
Work Schedule:
8AM - 5PM Monday-Friday
Work Type:
Full Time
permanent
N
Production Associates - 1st shift
🏢 Nesco Resource
Salary not disclosed
We are working with an Automotive sheet metal fabrication Company located in the Dublin, Ohio area.
We are seeking production workers who will manufacture sheet metal and light rail parts.
We are looking for energetic individuals with production experience using sheet metal, preferably in a manufacturing or job shop setting Monday -Friday 8a-4:30p with OT as needed Pay rate 17.50 Essential Duties and Responsibilities include the following.
Operation of various equipment, including but not limited to, spot welders, presses, and shearers to fabricate sheet metal products within required specification.
Lifts, positions and removes sheet metal and/or sheet metal parts from machines or stock to assist in fabrication.
Loads, stacks, and transports raw material, tools, dies, and products by hand or fork truck.
Utilization of overhead crane and slings to transport dies.
Cleans, grinds, and scrapes metal prior to fabricating, welding, painting, or shipping.
Performs quantitative and qualitative inspection of parts, as needed.
May require utilization of blueprints and/or other operational documentation.
Picks up and trucks scrap from work areas.
Cleans work area, machines, tools, and equipment.
More experienced associates may perform the following duties: Manually "hand work fabricated metal parts to specification, utilizing, for example, hammers and grinders.
Develop and plan sequences of operations.
Sets up fabricating machines such as press brakes, presses, shearers, plasma and flame cutters, drill presses, cutters, and bandsaws.
First shift (8:00am to 4:30pm) position with OT as needed Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
We are seeking production workers who will manufacture sheet metal and light rail parts.
We are looking for energetic individuals with production experience using sheet metal, preferably in a manufacturing or job shop setting Monday -Friday 8a-4:30p with OT as needed Pay rate 17.50 Essential Duties and Responsibilities include the following.
Operation of various equipment, including but not limited to, spot welders, presses, and shearers to fabricate sheet metal products within required specification.
Lifts, positions and removes sheet metal and/or sheet metal parts from machines or stock to assist in fabrication.
Loads, stacks, and transports raw material, tools, dies, and products by hand or fork truck.
Utilization of overhead crane and slings to transport dies.
Cleans, grinds, and scrapes metal prior to fabricating, welding, painting, or shipping.
Performs quantitative and qualitative inspection of parts, as needed.
May require utilization of blueprints and/or other operational documentation.
Picks up and trucks scrap from work areas.
Cleans work area, machines, tools, and equipment.
More experienced associates may perform the following duties: Manually "hand work fabricated metal parts to specification, utilizing, for example, hammers and grinders.
Develop and plan sequences of operations.
Sets up fabricating machines such as press brakes, presses, shearers, plasma and flame cutters, drill presses, cutters, and bandsaws.
First shift (8:00am to 4:30pm) position with OT as needed Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
Not Specified
N
Production Associates - 3rd shift
🏢 Nesco Resource
Salary not disclosed
We are working with an Automotive sheet metal fabrication Company located in the Dublin, Ohio area.
We are seeking production workers who will manufacture sheet metal and light rail parts.
We are looking for energetic individuals with production experience using sheet metal, preferably in a manufacturing or job shop setting 3rd shift Sunday-Thursday(Sun-11:30p-8a,Mon-Thurs-9:30p-8a) Pay rate $18.00
*** Will need to train on 1st shift for 3 months before moving to 3rd shift
*** Essential Duties and Responsibilities include the following.
Operation of various equipment, including but not limited to, spot welders, presses, and shearers to fabricate sheet metal products within required specification.
Lifts, positions and removes sheet metal and/or sheet metal parts from machines or stock to assist in fabrication.
Loads, stacks, and transports raw material, tools, dies, and products by hand or fork truck.
Utilization of overhead crane and slings to transport dies.
Cleans, grinds, and scrapes metal prior to fabricating, welding, painting, or shipping.
Performs quantitative and qualitative inspection of parts, as needed.
May require utilization of blueprints and/or other operational documentation.
Picks up and trucks scrap from work areas.
Cleans work area, machines, tools, and equipment.
More experienced associates may perform the following duties: Manually "hand work fabricated metal parts to specification, utilizing, for example, hammers and grinders.
Develop and plan sequences of operations.
Sets up fabricating machines such as press brakes, presses, shearers, plasma and flame cutters, drill presses, cutters, and bandsaws.
Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
We are seeking production workers who will manufacture sheet metal and light rail parts.
We are looking for energetic individuals with production experience using sheet metal, preferably in a manufacturing or job shop setting 3rd shift Sunday-Thursday(Sun-11:30p-8a,Mon-Thurs-9:30p-8a) Pay rate $18.00
*** Will need to train on 1st shift for 3 months before moving to 3rd shift
*** Essential Duties and Responsibilities include the following.
Operation of various equipment, including but not limited to, spot welders, presses, and shearers to fabricate sheet metal products within required specification.
Lifts, positions and removes sheet metal and/or sheet metal parts from machines or stock to assist in fabrication.
Loads, stacks, and transports raw material, tools, dies, and products by hand or fork truck.
Utilization of overhead crane and slings to transport dies.
Cleans, grinds, and scrapes metal prior to fabricating, welding, painting, or shipping.
Performs quantitative and qualitative inspection of parts, as needed.
May require utilization of blueprints and/or other operational documentation.
Picks up and trucks scrap from work areas.
Cleans work area, machines, tools, and equipment.
More experienced associates may perform the following duties: Manually "hand work fabricated metal parts to specification, utilizing, for example, hammers and grinders.
Develop and plan sequences of operations.
Sets up fabricating machines such as press brakes, presses, shearers, plasma and flame cutters, drill presses, cutters, and bandsaws.
Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Not Specified
N
Press break Operator - 1st shift
🏢 Nesco Resource
Salary not disclosed
Nesco is working with a Production Company in Dublin Ohio.
Looking for a 1st shift Press Break Operator.
Monday- Friday 8a-4:30p with OT as needed Pay is based on expierance About the Company and Position Automotive sheet metal fabrication Company located in the Columbus, Ohio area.
We are seeking production workers who will manufacture sheet metal and light rail parts.
Summary Sets up and operates both mechanical and hydraulic power presses to bend, form, stretch, and straighten metal plates, metal extrusions, formed sheet metal, structural shapes and forgings by performing the following duties.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
Plans sequence of operations.
Measures and sights along workpiece to mark reference lines.
Selects and positions flat, V-block, radius, or special purpose die sets into ram and bed of machine.
Aligns and bolts dies to ram and bed of machine.
Turns handwheel, levers or operates switches to set depth and pressure of ram stroke.
Lifts and positions workpiece between dies of machine.
Starts machine to lower ram which bends or straightens workpiece between dies.
Repositions workpiece and changes dies when making multiple or successive passes.
Hand forms or finishes workpiece.
Grinds out burrs and sharp edges.
Inspects and marks job number on finished workpiece.
Bends or straightens cold metal.
Sets dies to punch and blank heavy metal.
Operates press equipped with two or more rams to bend angles or flanges or bend to radius by successive passes; or operates multiple acting hydraulic press to perform deep progressive and reverse draw operations of sheet metal.
Education and/or Experience High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
Looking for a 1st shift Press Break Operator.
Monday- Friday 8a-4:30p with OT as needed Pay is based on expierance About the Company and Position Automotive sheet metal fabrication Company located in the Columbus, Ohio area.
We are seeking production workers who will manufacture sheet metal and light rail parts.
Summary Sets up and operates both mechanical and hydraulic power presses to bend, form, stretch, and straighten metal plates, metal extrusions, formed sheet metal, structural shapes and forgings by performing the following duties.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
Plans sequence of operations.
Measures and sights along workpiece to mark reference lines.
Selects and positions flat, V-block, radius, or special purpose die sets into ram and bed of machine.
Aligns and bolts dies to ram and bed of machine.
Turns handwheel, levers or operates switches to set depth and pressure of ram stroke.
Lifts and positions workpiece between dies of machine.
Starts machine to lower ram which bends or straightens workpiece between dies.
Repositions workpiece and changes dies when making multiple or successive passes.
Hand forms or finishes workpiece.
Grinds out burrs and sharp edges.
Inspects and marks job number on finished workpiece.
Bends or straightens cold metal.
Sets dies to punch and blank heavy metal.
Operates press equipped with two or more rams to bend angles or flanges or bend to radius by successive passes; or operates multiple acting hydraulic press to perform deep progressive and reverse draw operations of sheet metal.
Education and/or Experience High school diploma or general education degree (GED); or one to three years related experience and/or training; or equivalent combination of Requirements Minimum of 1 + years of experience in a manufacturing or job shop environment Blueprint, stamping and/or welding experience(s) a plus Good attitude and communication skills Must have a mechanical aptitude and strong attention to detail Must be able to use calipers and micrometers Must be able to lift up to 50lbs consistently Education and/or Experience High school diploma or general education degree (GED); or one to three years' related experience and/or training; or equivalent combination of education and experience.
Physical Demands The physical demands described in this job description are representative of those that must be met by an employee to successfully perform the essential functions of this job.
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger in a repetitive motion, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear.
The employee must regularly lift and /or move up to 50 pounds and occasionally lift and/or move up to 100 pounds.
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Nesco Resource is an equal employment opportunity employer and does not discriminate on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or veteran status, or any other legally protected characteristics with respect to employment opportunities.
Not Specified
Nurse Extern I - Acute MedSurgical A
🏢 Christus Health
Salary not disclosed
Description Summary: This position provides the student nurse an opportunity to work under the direction of a registered nurse and to gain experience in the areas of nursing professional, nursing processes and nursing practice. This hands-on experience will include educational sessions, job shadow, assist in patient care. May provide patient care in a CNA role as approved by manager (see CNA position description).
Responsibilities:
ASSISTS NURSING IN CARRYING OUT THE NURSING PLAN OF CARE.
Vital signs are completed and reported to nursing within 1 hour of scheduled time.
I/O's are collected and reported to nursing 30 minutes prior to end of shift.
All assigned baths are completed within the shift assigned.
Notifies nurse of any significant changes in patient condition promptly.
Ambulates and assists patient with ADLs within assigned time frame.
Monitors for signs of skin breakdown and communicates to nursing staff when indicated.
Obtain and record patient weight and height as indicated.
Keep patient bed low, locked and side rails up when patient is in bed.
Check patient food trays for accuracy.
Prepare patient's environment for eating.
Assists the patient in preparation to eat their meal, ie. sitting up in bed or chair, washing the patient's hands, cleaning the bedside table.
Reports patient's intake to nurse. Assists patient with feeding as necessary.
HELPS TO PROMOTE STEWARDSHIP OF RESOURCES AND ENVIRONMENT OF CARE.
Returns all equipment to SPD ASAP and at least by the end of the shift.
Assist with the monitoring of refrigerator / freezer logs.
Cleans refrigerator, microwave and other areas when indicated.
Maintains the integrity of the PYXIS Machine and inventory through pushing the "take" button.
Is respectful of linen supplies and mindful of appropriate usage of pads, etc.
Protects the environment of the patient care area as well as the hospital campus from vandalism and liter.
SERVICE EXCELLENCE
Consistently uses appropriate "scripting" as instructed when communicating with patients and their families.
Models service excellence in caring for patients providing "above and beyond" service consistently exceeding patients and families expectations.
Strives to anticipate the needs of patients and takes initiative to meet / exceed the patient's needs or wishes.
Responds to call light promptly.
Acts as a "team player" assisting co-workers regularly when time permits.
PERFORMS CLERICAL DUTIES RELATED TO PROCEDURES, AS IT RELATES TO A PATIENT CARE UNIT.
Checks food trays within 10 minutes of arrival to floor. (If appropriate for unit.)
Ensures that all charts are supplied with appropriate forms for documentation.
Relays messages to appropriate caregiver within 5-10 minutes of receiving message.
Prioritizes orders in the order entry system in a timely and accurate manner.
All reports are posted in a timely and accurate manner.
Ensures that diet/tube feeding changes are completed and credited every shift.
ASSISTS NURSING IN CARRYING OUT THE NURSING PLAN OF CARE
Assist the nurse with patient assessment rounds.
Collect and label voided urine, sputum and stool specimens.
Remove urinary catheters and cleanse catheter site.
Assist the nurse with wound care and dressing changes.
Perform glucose checks utilizing unit glucose monitors.
Perform secretarial duties such as taking off orders and answering call lights.
Document I/O's and vital signs using the computer charting system.
Requirements:
Must have Completed fundamentals in nursing
Current CPR Certification
Requirements:
Associate's Degree in Nursing
BLS
Work Schedule:
PRN
Work Type:
Per Diem As Needed
Responsibilities:
ASSISTS NURSING IN CARRYING OUT THE NURSING PLAN OF CARE.
Vital signs are completed and reported to nursing within 1 hour of scheduled time.
I/O's are collected and reported to nursing 30 minutes prior to end of shift.
All assigned baths are completed within the shift assigned.
Notifies nurse of any significant changes in patient condition promptly.
Ambulates and assists patient with ADLs within assigned time frame.
Monitors for signs of skin breakdown and communicates to nursing staff when indicated.
Obtain and record patient weight and height as indicated.
Keep patient bed low, locked and side rails up when patient is in bed.
Check patient food trays for accuracy.
Prepare patient's environment for eating.
Assists the patient in preparation to eat their meal, ie. sitting up in bed or chair, washing the patient's hands, cleaning the bedside table.
Reports patient's intake to nurse. Assists patient with feeding as necessary.
HELPS TO PROMOTE STEWARDSHIP OF RESOURCES AND ENVIRONMENT OF CARE.
Returns all equipment to SPD ASAP and at least by the end of the shift.
Assist with the monitoring of refrigerator / freezer logs.
Cleans refrigerator, microwave and other areas when indicated.
Maintains the integrity of the PYXIS Machine and inventory through pushing the "take" button.
Is respectful of linen supplies and mindful of appropriate usage of pads, etc.
Protects the environment of the patient care area as well as the hospital campus from vandalism and liter.
SERVICE EXCELLENCE
Consistently uses appropriate "scripting" as instructed when communicating with patients and their families.
Models service excellence in caring for patients providing "above and beyond" service consistently exceeding patients and families expectations.
Strives to anticipate the needs of patients and takes initiative to meet / exceed the patient's needs or wishes.
Responds to call light promptly.
Acts as a "team player" assisting co-workers regularly when time permits.
PERFORMS CLERICAL DUTIES RELATED TO PROCEDURES, AS IT RELATES TO A PATIENT CARE UNIT.
Checks food trays within 10 minutes of arrival to floor. (If appropriate for unit.)
Ensures that all charts are supplied with appropriate forms for documentation.
Relays messages to appropriate caregiver within 5-10 minutes of receiving message.
Prioritizes orders in the order entry system in a timely and accurate manner.
All reports are posted in a timely and accurate manner.
Ensures that diet/tube feeding changes are completed and credited every shift.
ASSISTS NURSING IN CARRYING OUT THE NURSING PLAN OF CARE
Assist the nurse with patient assessment rounds.
Collect and label voided urine, sputum and stool specimens.
Remove urinary catheters and cleanse catheter site.
Assist the nurse with wound care and dressing changes.
Perform glucose checks utilizing unit glucose monitors.
Perform secretarial duties such as taking off orders and answering call lights.
Document I/O's and vital signs using the computer charting system.
Requirements:
Must have Completed fundamentals in nursing
Current CPR Certification
Requirements:
Associate's Degree in Nursing
BLS
Work Schedule:
PRN
Work Type:
Per Diem As Needed
Not Specified
jobs by
✓ All jobs loaded