Deckorators Rail Bracket Kit Jobs in Usa
755 positions found — Page 7
Work Shift
Night (United States of America)
Hours: FT Nights, 9pm to 7:30am
Job Summary:
Prepare, compound, dispense medications, and perform other technical duties in the pharmacy department under direct supervision of a Pharmacist. Must demonstrate competency through supervised observation and/or any other necessary annual required competencies. Must be proficient in all responsibilities and duties of certified pharmacy technician.
Core Responsibilities and Essential Functions:
Medication Distribution
* Single Dispense - must prepare medications and/or IV for dispensing, select correct medication, correct strength, and correct form. Fill, label, and initial medication bag for a pharmacist verification.
* Bulk Dispense- Must fill multiple patient specific medications in accordance with department procedure.
* Transportation- bulk fill, first dose, and missing doses will be delivered securely to the appropriate units, while practicing appropriate procedure to ensure confidentiality for all patients.
* Missing Doses- upon request, must properly generate label, fill and have checked by a pharmacist, then dispense to the appropriate floor or unit.
* Product Preparation- must properly prepare, measure, count, medications including compound ointments, creams, oral solutions, oral solids, IV, etc.
(ADC) Automatic Dispensing Cabinet
* User- must be capable of accurately adding new users to the ADC system.
* Product- must properly load ADC with correct medications after medication is checked by a pharmacist. Monitor par levels and increase or decrease as needed.
* Reports- must be able to generate needed reports to fill, track, and identify/report all discrepancies.
* Minor Maintenance- must trouble shoot minor problems with ADC.
* Restock- must accurately fill medication, fluids and stock outs as needed.
* Recall- must assist the pharmacist and inventory specialist in retrieving recalled medications.
* Controlled Substances- Must follow all policies, procedures, and applicable laws with controlled substance medications.
IV Admixture
* Aseptic technique- Demonstrate knowledge of aseptic technique including; proper hand washing and proper use of IV Room attire. Understand Joint Commission, hospital, and departmental policies and procedures. Must complete an aseptic technique competency to show compliance with USP standards, conducted by supervisor or Lead Pharmacy Technician.
* Small volume- Demonstrate knowledge of preparing small volume admixtures
* Specialty solutions- Demonstrate knowledge of preparing epidural, intrathecal, intravenous, intramuscular, sterile syringes and chemotherapy (when applicable)
* Syringes- Demonstrate knowledge of preparing neonatal syringes (when applicable)
* Large volume- Demonstrate knowledge of preparing large volume solutions
* Room cleaning - Demonstrate knowledge of policies and procedures regarding maintaining clean room environment.
* Safety and Compliance Follows all safety and compliance standards for safely compounding medications. Always ensure that all requirements and procedures of United States Pharmacopeia are met.
Miscellaneous Activities:
* Repackaging and bar-coding medications- must accurately label all repackaged items per Georgia Board of Pharmacy Rules and Regulations.
* Properly provide customer service to customers and other healthcare professionals via in-person or virtual means.
* Process any charges: late charges, supplemental, OR charges, nuclear and exception report.
* Ordering supplies and obtaining purchase orders using the appropriate ordering system.
* Must be proficient in the distribution and accountability of Controlled Substance Medications.
* Code Carts / Kits - Must restock code carts and other kits returned to pharmacy according to departmental procedure and ensure required inspections are completed.
* Must perform monthly unit and pharmacy inspections and ensure that assigned pharmacy or medication area is clean including temperature and humidity monitoring.
* Must perform out date tracking on medications in various locations of the facility.
* Train and mentor pharmacy technicians under lead pharmacy technician
Performs other duties as assigned
Complies with all Wellstar Health System policies, standards of work, and code of conduct.
Required Minimum Education:
- High School Diploma General or GED General
Required Minimum License(s) and Certification(s):
All certifications are required upon hire unless otherwise stated.
- PHT - Registered Pharmacy Tech
- CPHT - Cert Pharmacy Tech or PHARMINT - Pharmacist - Intern
Additional License(s) and Certification(s):
Licensed and in good standing with the Georgia State Board of Pharmacy.
Upon Hire Required
Required Minimum Experience:
Hospital pharmacy experience Preferred and
General experience in all phases of pharmacy operations including basic knowledge of automated dispensing cabinets, inventory management, medication order interpretation, and Ga. Pharmacy law.
Required
Required Minimum Skills:
Basic computer skills.
Good oral communication skills.
Basic management skills.
Good problem solving skills.
Good interpersonal skills.
Ability to lift a minimum of 30 pounds.
Ability to push a transportation cart of approximately 100 pounds.
Join us and discover the support to do more meaningful work-and enjoy a more rewarding life. Connect with the most integrated health system in Georgia, and start a future that gives you more.
About the Job
Hello, potential PriceSmart candidate. We’re on a mission to hire the very best, and are committed to creating exceptional employee experiences where everyone is respected and has access to equal opportunity. We realize the greatest contributions to the company can come from anywhere in the organization, and we know that the next one could be yours! We are looking for a Global Buyer for Optical & Audiology to lead the global merchandising strategy for these categories, ensuring the business remains competitive in a rapidly evolving market. The role strengthens the company’s position by building high value supplier partnerships, managing a complex global vendor base, and overseeing the full product lifecycle to deliver innovation, quality, and commercial results. This position is accountable for profitable procurement, timely product availability, and disciplined inventory management across assigned categories. It drives negotiations that shape cost structures, terms of sale, freight and return programs, and margin performance, ensuring alignment with corporate pricing and financial strategies. Success is measured through achievement of sales targets, gross margin performance, and inventory health, ensuring globally sourced items remain within budgeted days of supply and financial thresholds while supporting sustainable global growth.
What's unique about this job (What you’ll do)
- The Global Buyer champions product quality, price and sourcing innovation to enhance competitiveness and member satisfaction.
- The role partners closely with U.S. leadership, regional buying and operations teams to validate category plans, optimize SKU strategies, and maintain an efficient, market relevant assortment across warehouses.
- Review inventory levels, market activity, vendor availability, and promotional plans to forecast demand and recommend accurate order quantities to the replenishment team.
- Work with the Vendor Promotions team to secure vendor funding and support for promotional programs that drive member value.
- Support the Registration and Compliance teams by ensuring all import/export documentation is complete, accurate, and aligned with regulatory requirements.
- Ensure all vendors maintain current agreements, including updated terms, compliance expectations, and performance standards.
- Review buying and distribution workflows to eliminate inefficiencies, improve productivity, and ensure staffing levels support business needs.
- Develop and maintain a seasonal merchandising/communications calendar to support timely planning and execution of high‑demand products.
- Build strong vendor relationships and conduct structured business reviews twice per year to evaluate performance and set goals.
- Develop in‑and‑out programs to strengthen categories, introduce innovation, and maintain member interest.
- Maintain strong alignment with Operations, ensuring merchandising notes and operational feedback are addressed promptly.
- Establish replenishment criteria for low‑stock items, including bracket pricing and distribution optimization.
- Review daily and weekly reports to monitor costs, quality, service levels, inventory turns, and out‑of‑stocks, acting as needed.
- Maintain accurate item information—including dimensions, pricing, terms, and category coding—in internal systems.
- Monitor team performance, identify training needs, and support ongoing development.
- Track vendor invoice payments to ensure timely processing and resolve discrepancies.
- Oversee competitive price‑shopping programs to ensure strong value positioning in Optical and Hearing Aids categories.
- Visit warehouse locations as needed to assess program execution, gather member and employee feedback, and evaluate the effectiveness of current and upcoming programs.
Bring your passion and expertise (Who you are)
- Degree in Business Administration or similar areas.
- 5–8 years of experience in global procurement, category management, or buying roles within Optical (frames, lenses), Hearing Aids, Medical Devices, or related healthcare categories.
- Proven experience managing global suppliers and negotiating high-value contracts.
- Strong understanding of regulatory and quality requirements for medical devices.
- Demonstrated success in private label development and lifecycle management.
- Licensed Dispensing Optician certification preferred, though not required.
- Advanced analytical skills with the ability to interpret market data, assess risks, and drive commercial decisions, including strong math skills applied to forecasting, costing, and financial analysis.
- Experience working in multinational retail, healthcare, or consumer-health organizations.
- Strong communication skills with the ability to collaborate effectively, demonstrate teamwork, and provide leadership across cross-functional and multicultural teams.
- Demonstrated commitment to delivering exceptional internal and external customer service.
- Proficiency with Windows-based, Office, Cloud-based systems or similar enterprise platforms is an advantage.
- Proficient in English and Spanish, with strong verbal and written communication skills.
- Ability to travel domestically and internationally, as required by business needs.
- Familiarity with trends such as digital hearing aids, aging-population demand, and smart-device integration.
Some important intangibles
You feel connected to our mission and values: Integrity, Respect, Accountability, Passion, Community and Continuous Improvement
You are a self-starter who doesn’t need direct supervision to motivate you for success
You enjoy sharing your quirkiness and talents with your coworkers
Enjoy working hard
Full of energy for the things one sees as challenging
The ability to remain calm when dealing with unforeseen constraints.
The above description is designed to state the general nature and level of work performed in the function. It is not intended to contain or be construed as an exhaustive inventory of all job duties, responsibilities and qualifications required of employees assigned to this job. A complete job description may be made available to you through the hiring process.
Benefits & Perks – We take care of our people
We believe taking care of our people is the right thing to do. This is what we can offer for all your hard work:
Beyond competitive pay
Medical, Dental and Vision plans
401K Contributions
Life Insurance
LTD
PriceSmart Membership Card
Calm Meditation App
Fun events
Employee recognition
Supportive, nurturing environment with many opportunities for learning and growth
...and more!
Our Commitment
We not only embrace and celebrate the diversity of our membership base and communities, but also strive to achieve the same in our employees. At PriceSmart, we are committed to equal employment opportunity, regardless of race, color, religion, national origin, gender, sexual orientation, age, disability, veteran status or any other class protected by applicable law. We are proud to be an equal opportunity employer.
Get to know us
PriceSmart was founded with a purpose: to inspire and impact the lives and businesses of our Members, our employees and our communities through the ethical delivery of the best quality goods and services at the lowest possible prices.
Throughout the years, we have constantly asked ourselves how we can do more and have a greater impact. We want to prove that we are a company that can grow, be profitable and do good in the world, and we have learned that it takes a great organizational culture to achieve that goal.
At PriceSmart, you can look forward to company events, anniversaries celebrating our employees with more than 20, or 30 years of tenure, volunteering and learning opportunities, and just great company filled with curious, kind folks. Dreaming up and sharing ideas aren’t responsibilities reserved for certain teams or leaders; the challenge of building our own culture is on all of our shoulders. That sense of community and belonging keeps us excited to walk through the door every day, wherever that door may be, in any of our 13 countries.
Title: Inventory Analyst
Location: Boston, MA (5 days onsite)
Hours: 8-5 PM EST
Duration: 6 Month Contract-to-hire
Pay Range: $30- 39/ hr
Job Description:
As a Temporary Inventory Analyst, you’ll be part of a cross-functional team whose mission is to lead IonQ on its journey to build the world’s best quantum computers to solve the world’s most complex problems.
This position will be responsible for receiving, stocking, pulling, issuing and adjusting inventory at IonQ’s Seattle office. This position is an in-person role.
Responsibilities:
- Interface with delivery drivers to receive and ship packages
- Unbox inbound packages, verify inventory to packing slip and perform receiving and stocking transactions in NetSuite or in applicable tracking system
- Pack outgoing packages and schedule couriers as needed
- Kit material for use in manufacturing/engineering applications
- Issue parts as needed for manufacturing/engineering applications
- Assist with designing a methodology for parts organization in a small warehouse environment and point-of-use floor stock
- Other duties as assigned
You’d be a good fit with:
- High school diploma required
- Ability to work well with representatives from other functional areas (e.g., engineering, procurement)
- Ability to work in an environment with high levels of ambiguity and limited direction
- 5+ years of experience in inventory management/warehousing environment
- Ability to lift material up to 50 lbs and stand for extended periods
- Ability to use material handling equipment (e.g., pallet jack)
- Professional written communication skills
You’d be a great fit with:
- Experience performing material-related transactions (e.g., receiving, kitting, issuing, cycle counting) in an ERP system, ideally Oracle NetSuite
- Experience in a high-functioning warehousing environment
- Experience setting up a warehouse with an organized parts identification schema
- High levels of ownership and the willingness to roll up your sleeves, dig deep, solve problems, and deliver results
- Previous people management/leadership experience
Benefits packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law
Title: B2B/VAS Supervisor
Salary: $70k-80k
Duration: PERM
Location: Perris, CA (onsite 5 days a week)
Job Summary
The B2B / VAS Supervisor oversees all business‑to‑business (B2B) fulfillment operations and value‑added services (VAS) production activities. This role is responsible for ensuring accurate, compliant, and on‑time B2B shipments while managing VAS workflows such as kitting, labeling, bundling, assembly, rework, and special projects. The Supervisor partners closely with internal teams to align production schedules, meet customer requirements, control costs, and maintain quality standards.
Key Responsibilities
B2B Fulfillment Oversight
- Supervise day‑to‑day B2B order processing, shipping, and fulfillment operations
- Ensure compliance with customer routing guides, labeling requirements, pallet standards, and documentation
- Coordinate LTL and FTL freight shipments and work with carriers to meet delivery timelines
- Monitor and reduce chargebacks through proactive compliance and process improvement
- Partner with customers and internal teams on forecasts, deadlines, and shipment requirements
- Track and report KPIs including OTIF, compliance accuracy, and shipping costs
VAS / Production Management
- Oversee all value‑added services (VAS) and production workflows, including kitting, labeling, bundling, assembly, rework, and special projects
- Plan labor, timelines, and resources for production and VAS initiatives
- Ensure quality standards and client specifications are consistently met
- Coordinate production schedules with B2B and DTC teams to support shipping timelines
- Track labor costs and project profitability
- Develop and maintain SOPs for repeatable VAS services
- Train, coach, and supervise production staff and team leads
Cross‑Functional Leadership
- Serve as a key point of contact between fulfillment, production, and operations leadership
- Identify process improvements to increase efficiency, accuracy, and scalability
- Support continuous improvement initiatives across B2B and VAS operations
Qualifications
- 3+ years of experience in B2B/wholesale fulfillment, VAS, production, or light assembly
- Strong knowledge of retailer routing guides, pallet standards, and compliance requirements
- Experience coordinating LTL/FTL freight
- Background in a warehouse or 3PL environment preferred
- Strong organizational and project management skills
- Detail‑oriented with a quality‑first mindset
- Proven ability to lead, train, and manage teams in a fast‑paced environment
Job Title: Seibi Technician /Seibi Technician Position (T14) within Production Engineering Powertrain
Duration: 12 months and possible for extension
Location: Buffalo, West Virginia (Onsite)
Education Level: Associates/Technical Degree
Job Classification: Technician
International Travel: 25% mainly to Japan – documentation, observation, may be once or twice a year and may be sometimes to Canada and Mexico.
Domestic Travel: 25% within the United States
What you need to have:
- High School Diploma or 2 years technical degree equivalent or appropriate experience of 2 years in technical maintenance.
- Experience with PLC programming including the ability to read, interpret and modify
- Preferred Experience with input/output for machine-to-machine communication
- Preferred Experience with NC Programming including the ability to read, interpret and modify
- Experience with Pneumatic / Hydraulic systems including the ability to read, interpret and modify.
- Experience with performing static accuracy measurements
- Willingness to work required overtime and travel as needed both domestic and international
Added bonus if you have:
- Experience in an engineering or maintenance role in a high-volume manufacturing facility (2 years Preferred)
- Experience with fabrication/modification of simple parts (Brackets, Guarding, etc)
- Experience using Job Instruction Sheets (JIS)
- Experience creating Job Instruction Sheets and Job Safety Analysis (JIS/JSA)
Job Title: Seibi Technician
Location: Buffalo, WV
Job Type: Contract
About CTC:
Founded in 1996, CTC is a global IT services, Consulting and Business Solutions partner dedicated to helping organizations innovate, optimize, and grow. With over 2,000 professionals worldwide, we support more than 100 clients in transforming complex challenges into lasting competitive advantages.
Who we’re looking for
- Production Engineering, Powertrain Department is looking for a passionate and highly motivated Seibi Position.
- The primary responsibility of this position is to execute as the North American machine set up personnel (SV), increase Operation Availability (OA) through continuous improvement and problem-solving technical issues.
- Reporting to the Engineering Manager , the person in this role will support the Powertrain department's objective to execute Capital Projects from planning through start of production (SOP).
- Successful candidate must exhibit leadership values; (Respect for People and Continuous Improvement Activity). Desired characteristics include perseverance, curiosity for enrichment learning, self-motivation, good communication skills and humility. Must be able to navigate complex problem solving at the regional level. Successful candidate must be effective at identifying and removing barriers that hinder progress. Candidate must decide appropriate work priorities, developing and executing schedule for said priorities and reporting their status to management group.
What you’ll be doing
- Engage with other groups/ department in jishuken activity.
- Utilize TBP process to solve chronic OA and workability Issues.
- Develop & manage denwacho for assigned work area
- Track & countermeasure punch list items for area of concern.
- Engaging in functional activity and complex problem solving individually and within the working group
- Utilize MK/ MMR/MMS revision processes to drive global machine spec improvements.
- Plan and execute equipment commissioning activity for assigned work area.
- Demonstrate the ability to learn new processes as required.
- Supporting VTO / ITO / Production Trials
- Certify Safety of Equipment per MMR/MMS via “Safety Check”.
Requirements:
What you bring
- High School Diploma or 2 years technical degree equivalent or appropriate experience of 2 years in technical maintenance.
- Experience with PLC programming including the ability to read, interpret and modify
- Preferred Experience with input/output for machine-to-machine communication
- Preferred Experience with NC Programming including the ability to read, interpret and modify
- Experience with Pneumatic / Hydraulic systems including the ability to read, interpret and modify.
- Experience with performing static accuracy measurements
- Willingness to work required overtime and travel as needed both domestic and international
Added bonus if you have
- Experience in an engineering or maintenance role in a high-volume manufacturing facility (2 years Preferred)
- Experience with fabrication/modification of simple parts (Brackets, Guarding, etc)
- Experience using Job Instruction Sheets (JIS)
- Experience creating Job Instruction Sheets and Job Safety Analysis (JIS/JSA)
- Pay Rate: $20/hr
- Hours: 6am-2:30pm Mon-Fri
- TEMP role 2-8 weeks in duration
Executes a variety of tasks that includes receipt and verification of materials, calibration and operation of equipment, dispensing or packaging dry and/ or wet products, capping and torquing of bottles, assembly of components and kits, performing calculations, and completing required documentation following Good Documentation Practices.
- Packages finished products
- Calibrates/ operates equipment
- Codes and applies labels
- Seals bags and pouches
- Dispenses solutions
- Assembles components and kits
- Fill out required documentation (work orders, procedures, logs)
- Special assignments may include processing rework, scrap and waste disposal, other duties as assigned.
- Follow guidelines with use of personal
- Protective equipment including use of hood with assisted breathing air
- High school diploma or equivalent 2+ years related experience or equivalent combination of education and experience.
- Ability to follow comprehensive written instructions, to work independently as well as in a team environment, and to perform basic math including use of fractions and decimals where applicable.
- Basic computer skills in applicable programs.
- Knowledge of all safety policies and procedures and handling of goods and/ or hazardous materials.
- May be required to wear personal protective equipment which includes a hood with assisted breathing air.
- Ability to lift at least 15 lbs and use equipment such as pallet jacks and lift assist equipment for heavier materials.
- This is a unique opportunity to support our client; one of the world's largest biotechnology companies. Medical benefits and 401K are available.
Yoh makes finding and applying for jobs simple. Partner with Yoh Staffing to find the right opportunities across multiple industries in the US and UK. Find out more here!
Recruiter: Lisa Hughes
Estimated Min Rate: $20.00
Estimated Max Rate: $20.00
What’s In It for You?
We welcome you to be a part of the largest and legendary global staffing companies to meet your career aspirations. Yoh’s network of client companies has been employing professionals like you for over 65 years in the U.S., UK and Canada. Join Yoh’s extensive talent community that will provide you with access to Yoh’s vast network of opportunities and gain access to this exclusive opportunity available to you. Benefit eligibility is in accordance with applicable laws and client requirements. Benefits include:
- Medical, Prescription, Dental & Vision Benefits (for employees working 20+ hours per week)
- Health Savings Account (HSA) (for employees working 20+ hours per week)
- Life & Disability Insurance (for employees working 20+ hours per week)
- MetLife Voluntary Benefits
- Employee Assistance Program (EAP)
- 401K Retirement Savings Plan
- Direct Deposit & weekly epayroll
- Referral Bonus Programs
- Certification and training opportunities
Note: Any pay ranges displayed are estimations. Actual pay is determined by an applicant's experience, technical expertise, and other qualifications as listed in the job description. All qualified applicants are welcome to apply.
Yoh, a Day & Zimmermann company, is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.
Visit to contact us if you are an individual with a disability and require accommodation in the application process.
For California applicants, qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. All of the material job duties described in this posting are job duties for which a criminal history may have a direct, adverse, and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.
By applying and submitting your resume, you authorize Yoh to review and reformat your resume to meet Yoh’s hiring clients’ preferences. To learn more about Yoh’s privacy practices, please see our Candidate Privacy Notice:
Plumbing Technician & Support Professional
Come join the TOTO USA Family!
The bathroom is where we start and end our days - it's an everyday luxury we'd never want to do without. TOTO believes that people should have the greatest comfort, convenience and performance design possible in the bathroom. Improving people's lives is what inspires every TOTO innovation.
TOTO is one of the world's largest plumbing products manufacturers. We offer a complete line of residential and commercial plumbing fixtures and fittings, faucets, accessories, shower and flush valves, as well as lavatories, toilets, air baths and urinals. More than 1,500 TOTO engineers and their colleagues are committed to achieving the seamless integration of performance, conservation, technology, and innovation.
Perks of the job,
· Excellent benefit package which includes medical, dental, vision, and life insurance.
· Paid vacation, Paid Holiday & 401K, Company match after (1) one year that vests immediately upon participation
· Collaborative, dynamic work environment within a fast-paced awesome company
MAJOR FUNCTION:
Plumbing Technician & Support Professional performs tasks in the after sales service of products based on verbal and written instructions such as but not limited to Standard Operations Procedures (SOPs), Standard Inspection Procedures (SIPs), Work Orders (WO’s).
TOOLS AND EQUIPMENT:
May include, but not limited to: hand tools, power tools, company van, storage unit, parts kits, voltage meter, testers, water valves, electronic components, after service manuals, company tablet, company phone, company gps, cameras, PPE, safety kits, disposal materials, etc...
MATERIALS:
May include, but not limited to: Contact with: ABS plastic parts, silicone rubber parts, brass and stainless steel parts, cardboard boxes, wooden pallets, adhesive labels, vitreous china products. Contact with oil lubricant/preservative as well as powder mold release/preservative on vendor parts. Utilizes Windex, alcohol, acetone, Loctite, silicone oil, silicone grease and cleaners such as Lysol.
ESSENTIAL DUTIES AND RESPONSIBILITIES:
- Plumbing Technician & Support Professional - MAIN DUTY - Performs repairs on Washlets, Neorest, or any TOTO products in the field.
- MAIN DUTY - Call Center / Handles inbound customer calls, follow ups, scheduling, troubleshooting, etc…
- Handles Tech Service email queues / chat queues as needed.
- Showroom visiting, making a relationship, responding their inquiry
- Must be able to travel on behalf of TUS. USA / Canada – Inspection / Repair / Other
- Follows all company policies and procedures, including, but not limited to the employee handbook.
- Must locate, read, understand, and follow SOP’s, SIP’s, and/or WO’s.
- Performs duties outlined in work instructions such as SOP’s/SIP’s.
- May work with raw materials in the process.
- Assembles/Inspects various parts in accordance to SOPs/SIP’s.
- Maintains accurate inventory count as appropriate in process.
- Performs quality checks during the process as outlined in SOP/SIP.
- Maintains good housekeeping practices (safe, neat, and orderly work area per 5S program), follows all safety rules and abides by all applicable local, state and federal laws and regulations. Follows and supports ISO related activities, and encourages other associates to follow ISO recommendations.
- Assists with training personnel as needed.
- Performs other duties as assigned.
- Actively contributes to continuous improvement within their area as well as the After Service Department.
EDUCATION AND EXPERIENCE:
High school diploma, GED or equivalent with a minimum of 3 years mechanically related experience (Plumbing / HVAC / Electronic Repairs / etc.). Must be able to use the Windows platform and all related programs. Must possess basic mathematical and measurement skills (addition, subtraction, multiplication, division and an understanding of fractions and decimals). Ability to read and comprehend basic written instructions and procedures.
PHYSICAL REQUIREMENTS:
The physical demands described here are representative of those that must be met by a Plumbing Technician & Support Professional to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Technical Support Specialist regularly required to stand, use hands to finger, handle, twist or feel; and reach with hands and arms.
- Frequently required to walk; stoop, kneel or crouch; and speak or listen.
- Frequently required to operate a vehicle for an extended amount of time, maintaining an acceptable driver’s abstract.
- Lifting as required in job and SOP
- Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
- Where appropriate the use of personal protective equipment (PPE) including, but not limited to, hearing protection, hard hats, disposable gloves, shoe covers, safety vest, safety shoes, and company uniforms/hats.
- Repetitive bending/pulling.
- Repetitive movements of fingers, hands, wrists and arms.
- Ability to lift fifty pounds repeatedly.
- Ability to protect a customer’s property, sanitation, and disposal of hazardous material (bio / electronic).
WORK ENVIRONMENT:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The work environment consists of an indoor office facility with limited heat in winter, not air conditioned in summer. Summer heat is moderate. Outdoor customer household. Minor exposure to odors from lubricants/preservatives as well as fumes from gas operated vehicles. Moderate noise levels are present. Job requires the use of personal protective equipment (PPE) that may include, but not limited to; protective gloves, ear plugs, safety glasses, protective sleeves, and safety shoes. Minimal possibility of accidents of a minor nature requiring first aid.
Regardless of Position/Title, all employees are expected to provide the highest level of customer service and kindness for the TOTO organization. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. As an employee, you are expected to perform other duties, as assigned.
TOTO USA is an Equal Opportunity Employer (EEO). All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, protected veteran status, or any other characteristic protected by applicable federal, state, or local law.
TOTO USA provides reasonable accommodations for qualified individuals with disabilities in accordance with the Americans with Disabilities Act (ADA) and other applicable laws. We are committed to maintaining a drug-free workplace.
Cranemasters is a leading provider of specialized engineering and railroad services, delivering innovative solutions for heavy-lift operations and rail-connected machinery. We are seeking a Mechanical Design Engineer to join our team and help design and optimize cranes, attachments, and related equipment tailored for the rail industry.
This role requires a deep understanding of the unique challenges of railway construction, including heavy lifts, track maintenance, and complex logistics. You will collaborate with a skilled engineering team to create designs that prioritize safety, efficiency, durability, and compliance with industry standards. Key considerations include load capacity, stability, reliability, ease of maintenance, and maneuverability along railway tracks.
Responsibilities include structural analysis, material and component selection, and ensuring equipment performance and safety throughout its lifecycle.
Work Schedule
This position follows a 9/80 work schedule and is primarily based in Chesterfield, Virginia. When supporting the Aftermarket Group, approximately 80% of your time will be at our Richmond location, with one dedicated day per week at Chesterfield headquarters.
As a first responder to the railroad industry, all Cranemasters employees are considered on call for emergency support. Engineering management may request support outside normal hours to meet urgent operational needs.
Key Responsibilities
Product Development
- Design: Develop new crane structures, overhaul existing designs, and create hardware for enhanced functionality. Apply abstract thinking, visualize 3D concepts from 2D drawings, and perform reverse engineering when needed.
- Testing: Validate designs through calculations, modeling, and prototyping. Conduct field testing to simulate real-world conditions, identify issues, and ensure compliance before full implementation.
Aftermarket
- Rebuild Projects: Lead inspections, refurbishments, and rebuilds of high-tonnage cranes and related machinery. Plan and execute repairs and upgrades to meet safety and industry standards.
- Technical Support: Provide technical assistance to customers and internal teams, troubleshoot issues remotely or on-site, and ensure optimal equipment performance.
Production
- Catalog Design Updates: Implement iterative design improvements for standard equipment models. Coordinate releases with management and manufacturing teams based on production schedules.
- Compliance & Delivery: Ensure all builds meet customer specifications and regulatory standards. Complete documentation, testing, and final handoff of equipment.
General Responsibilities
- Problem Solving: Apply critical thinking and collaborate across teams to resolve technical challenges.
- Ownership of Design: Oversee designs through manufacturing and testing phases, adapting quickly to changes.
- Product Knowledge: Maintain expertise in Cranemasters’ equipment and stay current with industry best practices and safety regulations.
- Customer Engagement: Communicate effectively with customers, providing updates and addressing inquiries.
- Quality Assurance: Work with project managers and foremen to uphold quality standards during rebuilds and production.
- Communication: Maintain open dialogue with engineering, manufacturing, and operations teams, providing clear rationale for design decisions.
- Resilience: Respond effectively to dynamic, high-pressure situations during emergency derailment support.
- Documentation: Follow revision control and release guidelines; record calculations, procedures, and results accurately.
- Time Management: Prioritize tasks to meet manufacturing timelines and urgent delivery requirements.
Required Travel
- Approximately 5–10%
Benefits & Perks
- Annual Bonus Program: Eligible to participate in our discretionary corporate bonus program based on company and individual performance.
- Comprehensive Benefits: Effective the first of the month following 60 days of employment.
- Technology Support: A company-provided laptop to keep you connected and productive.
- 9/80 Work Schedule: 10‑hour shift schedule with every other Friday off, supporting work–life balance.
- Paid Time Off: Accrual begins your first week at a rate equivalent to 80 hours per year; PTO available after 90 days of service.
Job Summary
The B2B / VAS Supervisor oversees all business‑to‑business (B2B) fulfillment operations and value‑added services (VAS) production activities. This role is responsible for ensuring accurate, compliant, and on‑time B2B shipments while managing VAS workflows such as kitting, labeling, bundling, assembly, rework, and special projects. The Supervisor partners closely with internal teams to align production schedules, meet customer requirements, control costs, and maintain quality standards.
B2B Fulfillment Oversight
- Supervise day‑to‑day B2B order processing, shipping, and fulfillment operations
- Ensure compliance with customer routing guides, labeling requirements, pallet standards, and documentation
- Coordinate LTL and FTL freight shipments and work with carriers to meet delivery timelines
VAS / Production Management
- Oversee all value‑added services (VAS) and production workflows, including kitting, labeling, bundling, assembly, rework, and special projects
- Plan labor, timelines, and resources for production and VAS initiatives
- Ensure quality standards and client specifications are consistently met
Qualifications
- 3+ years of experience in B2B/wholesale fulfillment, VAS, production, or light assembly
- Strong knowledge of retailer routing guides, pallet standards, and compliance requirements
- Experience coordinating LTL/FTL freight
- Background in a warehouse or 3PL environment preferred
