Daily Essentials Examples Jobs in Usa

Recent acute dialysis experience is required

PURPOSE AND SCOPE:

The professional registered nurse Inpatient RN CAP 2 may be an entry level designation into the Clinical Advancement Program (CAP) for new employees who meet the RN CAP 2 criteria or attained through advancement from CAP 1. This position is accountable and responsible for the provision and coordination of clinically competent care including assessment, planning, intervention and evaluation for an assigned group of patients. This may include delegation of appropriate tasks to direct patient care staff including but not limited to RNs, LVN/LPNs and Patient Care Technicians. As a member of the kidney disease health care team, this position participates in decision-making, teaching, leadership functions, and quality improvement activities that enhance patient care outcomes and program operations.

PRINCIPAL DUTIES AND RESPONSIBILITIES:

All duties and responsibilities are expected to be performed in accordance with Fresenius Kidney Care policy, procedures, standards of nursing practice, applicable contractual service agreements, state and federal regulations.

• Performs all essential functions under the direction of the Supervisor and with the guidance from the Educator, Preceptor, or in collaboration with another Registered Nurse.
• Performs ongoing, systematic collection and analysis of patient data pre – during – post treatment for assigned patients and documents in the patient medical record, makes adjustments or modifications to treatment plan as indicated and notifies Supervisor, Physician, patient's primary nurse and others as indicated.
• Assesses, collaborates and documents patient/family's basic learning needs to provide initial and ongoing education to patients and family.
• Recognizes aspects and implications of patient status that vary from normal and reports to or collaborates with appropriate health team members for input including but not limited to Supervisor, appropriate physician, and the contracted facility/primary Nurse.
• Directs and provides safe effective patient care for assigned patients as prescribed for all modality specific treatment procedures.
• Assesses daily assigned patient care needs and collaborates with direct and ancillary patient care staff as needed.
• Initiates and coordinates communication with FKC and Non-FKC dialysis providers and appropriate contracted facility personnel as needed to provide continuity of patient care.
• Performs the implementation, administration, monitoring, and documentation of patient's response to prescribed intradialytic transfusions, including appropriate notification of adverse reactions to physician and appropriate blood supplier.
• Administers medications as prescribed and documents medical justification and effectiveness.
• Initiates and assists with emergency response measures.
• Serves as a resource, leader, coach, mentor and role model for new and incumbent employees by setting examples of appropriate behavior, work habits and attitudes towards patients, co-workers, Supervisors and the company at the facility and area level.
• May be asked to provide specialized nursing care instructions to hospital/facility staff as stipulated contractually.
• May be assigned to assist in an Outpatient facility on an as needed basis.
• May serve as a Preceptor to new employees.
• Required to complete CAP requirements to maintain or advance.
• Performs all other duties as assigned by Supervisor.

PHYSICAL DEMANDS AND WORKING CONDITIONS:

The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• The position provides direct patient care that regularly involves heavy lifting, moving of patients and assisting with ambulation. Equipment aids and/or coworkers may provide assistance.
• This position requires frequent, prolonged periods of standing and the employee must be able to bend over.
• The employee may occasionally be required to move, with assistance, machines and equipment of up to 200 lbs., and may lift chemical and water solutions of up to 30 lbs. as high as 5 feet.
• The work environment is characteristic of a health care facility with air temperature control and moderate noise levels.
• May be exposed to infectious and contagious diseases/materials.
• May be asked to provide essential functions of this position in other locations with the same physical demands and working conditions as described above.
• Day to day work includes desk work, computer work, interaction with patients, facility/hospital staff and physicians.
• The position requires travel to training/meeting sites and between assigned facilities.
• Position requires participation in on-call rotation, night, weekend, holiday or as defined by individual program needs.
• Employees are required to take the Ishihara's Color Blindness test as a condition of employment. Note that: Failing the

Ishihara Test for Color Blindness does not preclude employment. The Company will consider whether reasonable accommodation can be made.

SUPERVISION:

Assigned oversight of Patient Care Technicians/LPNs/LVNs/RNs as a designated Nurse in Charge, after meeting all the following:

- Successful completion of all FKC education and modality specific training requirements.- 6 months experience in acute dialysis as a RN.

EDUCATION AND LICENSURE:

• Current appropriate state licensure.
• Current or successful completion of CPR BLS Certification
• Must meet the practice requirements in all states employed.

EXPERIENCE AND REQUIRED SKILLS:

- Entry level for RNs with minimum 2 years or more of Nephrology Nursing experience in the last 2 years as a RN.- Acute dialysis experience (preferred).

Fresenius Medical Care maintains a drug-free workplace in accordance with applicable federal and state laws.

EOE, disability/veterans

Parker Hannifin is seeking a full-time Plant Manager to lead operations at the Sporlan Division facility in Washington, Missouri, which employs approximately 450 production and office personnel. The Plant Manager will oversee all aspects of facility operations to achieve results aligned with the Corporation’s Win Strategy and annual improvement priorities.

This role involves leading an empowered team to consistently exceed customer expectations by implementing the Parker Lean system and Win Strategy to ensure a safe work environment, drive quality improvements, deliver premier customer service, and reduce operating costs through continuous improvement efforts aimed at shortening lead times and maximizing profitable growth, while managing day-to-day activities to meet daily, monthly, quarterly, and annual goals.

Scope/ Supervision and Interaction:

Has Direct Reports

Provides leadership for Plant operation employees. Coordinates all manufacturing functions within the Plant environment.

Responsible for all aspects of managing Plant Operations, including developing associates, driving consistency and accountability, ensuring team consensus is used to thoroughly evaluate decisions, and ensuring rapid implementation of those decisions. Additional responsibilities include budget planning, employment decisions related to associates, and performance assessment of all direct reports, team leaders, and associates.

Essential Functions:

The Plant Manager is responsible for profitably growing the plant and achieving goals measured on a weekly, monthly, quarterly, and annual basis. They work closely with internal and external customers to promote and leverage the company’s technologies, systems, products, services, and processes, while consistently establishing and maintaining premier customer service.

This role leads strategy deployment for plant initiatives and growth, overseeing manufacturing functions to ensure operational efficiency and cost-effectiveness. The Plant Manager collaborates with various departments, including Human Resources, Safety, Lean, Quality, Engineering, Maintenance, Information Technology, and Production Control and Planning. Additionally, they work with these functions to develop a plant budget aimed at reducing costs and growing the business profitably.

Accountable for driving Lean initiatives throughout the plant, the Plant Manager ensures these are fully embraced and implemented. They guarantee that proper inventory management, production control scheduling, shipping/receiving logistics, and quality procedures are in place.

The Plant Manager fosters a positive, can-do team atmosphere by holding regular meetings, assigning tasks, and coordinating support services. They utilize PDCA alongside Tracking Centers and Team Improvement Boards to monitor and ensure results. Staying familiar with the competitive environment, the Plant Manager provides leadership by promoting team concepts, coaching, counseling, retaining, mentoring, training, talent management, and individual development. Through strategy deployment and effective performance management, they drive a culture of accountability and results.

The essential functions provided are examples of the types of work performed by employees assigned to this job classification. The company reserves the right to modify work assignments and/or make reasonable accommodations to enable qualified employees to perform these essential functions. This job description is not intended to be an exhaustive list of duties and responsibilities but rather to describe the general nature of the position.

Bachelor’s degree in a technical or business discipline is required; an advanced degree is recommended.

Minimum of five years’ experience in a manufacturing environment.

Demonstrated ability to organize and manage multiple priorities using effective problem-solving and resolution skills, with a strong team focus.

Excellent interpersonal and communication skills, with the ability to effectively and persuasively present information to management, customers, and employees.

Practical experience in implementing lean technologies and practices.

Excellent problem-solving skills; Six Sigma certification is preferred.

Parker Hannifin is a Fortune 250 global leader in motion and control technologies and systems. For more than a century the company has been enabling engineering breakthroughs that lead to a better tomorrow. Learn more at or @parkerhannifin.

Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.

(“Minority / Female / Disability / Veteran / VEVRAA Federal Contractor”)

If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

Parker Hannifin is seeking a full-time Manufacturing Operations Manager to lead operations at the Sporlan Division facility in Washington, Missouri, which employs approximately 450 production and office personnel. The Operations Manager will oversee all aspects of facility operations to achieve results aligned with the Corporation’s Win Strategy and annual improvement priorities.

This role involves leading an empowered team to consistently exceed customer expectations by implementing the Parker Lean system and Win Strategy to ensure a safe work environment, drive quality improvements, deliver premier customer service, and reduce operating costs through continuous improvement efforts aimed at shortening lead times and maximizing profitable growth, while managing day-to-day activities to meet daily, monthly, quarterly, and annual goals.

Scope/ Supervision and Interaction:

Has Direct Reports

Provides leadership for Plant operation employees. Coordinates all manufacturing functions within the Plant environment.

Responsible for all aspects of managing Plant Operations, including developing associates, driving consistency and accountability, ensuring team consensus is used to thoroughly evaluate decisions, and ensuring rapid implementation of those decisions. Additional responsibilities include budget planning, employment decisions related to associates, and performance assessment of all direct reports, team leaders, and associates.

Essential Functions:

The Operations Manager is responsible for profitably growing the plant and achieving goals measured on a weekly, monthly, quarterly, and annual basis. They work closely with internal and external customers to promote and leverage the company’s technologies, systems, products, services, and processes, while consistently establishing and maintaining premier customer service.

This role leads strategy deployment for plant initiatives and growth, overseeing manufacturing functions to ensure operational efficiency and cost-effectiveness. The Operations Manager collaborates with various departments, including Human Resources, Safety, Lean, Quality, Engineering, Maintenance, Information Technology, and Production Control and Planning. Additionally, they work with these functions to develop a plant budget aimed at reducing costs and growing the business profitably.

Accountable for driving Lean initiatives throughout the plant, the Operations Manager ensures these are fully embraced and implemented. They guarantee that proper inventory management, production control scheduling, shipping/receiving logistics, and quality procedures are in place.

The Operations Manager fosters a positive, can-do team atmosphere by holding regular meetings, assigning tasks, and coordinating support services. They utilize PDCA alongside Tracking Centers and Team Improvement Boards to monitor and ensure results. Staying familiar with the competitive environment, the Operations Manager provides leadership by promoting team concepts, coaching, counseling, retaining, mentoring, training, talent management, and individual development. Through strategy deployment and effective performance management, they drive a culture of accountability and results.

The essential functions provided are examples of the types of work performed by employees assigned to this job classification. The company reserves the right to modify work assignments and/or make reasonable accommodations to enable qualified employees to perform these essential functions. This job description is not intended to be an exhaustive list of duties and responsibilities but rather to describe the general nature of the position.

Bachelor’s degree in a technical or business discipline is required; an advanced degree is recommended.

Minimum of five years’ experience in a manufacturing environment.

Demonstrated ability to organize and manage multiple priorities using effective problem-solving and resolution skills, with a strong team focus.

Excellent interpersonal and communication skills, with the ability to effectively and persuasively present information to management, customers, and employees.

Practical experience in implementing lean technologies and practices.

Excellent problem-solving skills; Six Sigma certification is preferred.

Parker Hannifin is a Fortune 250 global leader in motion and control technologies and systems. For more than a century the company has been enabling engineering breakthroughs that lead to a better tomorrow. Learn more at or @parkerhannifin.

Parker is an Equal Opportunity and Affirmative Action Employer. Parker is committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency or other appropriate status is required for certain positions, in accord with U.S. import & export regulations.

(“Minority / Female / Disability / Veteran / VEVRAA Federal Contractor”)

If you would like more information about Equal Employment Opportunity as an applicant under the law, please go to Employees & Job Applicants | U.S. Equal Employment Opportunity Commission

MAU is hiring a Technical Writer for our client in Greenville, SC. As a Technical Writer, you will create and document manufacturing processes, industrialization standards, and lean practices while supporting inspections and process validations. This is a long-term contract assignment.

Benefits Package

• 401(k) with company matching
• Health insurance
• Dental insurance
• Vision insurance
• Paid time off
• Paid holidays
• Uniform allowance

Shift Information

• Monday – Friday | 7:30 AM – 4:30 PM
• Ability to work off-shift or a flexible schedule as required by project timelines

Required Education and Experience

• Bachelor’s degree from an accredited university or college OR
• A high school diploma / GED with at least 1 year of technical writing experience

Preferred Experience

• Bachelor’s degree in Engineering or Machine Tool Technology
• Demonstrated examples of technical writing
• Demonstrated examples of applying lean principles

General Requirements

• Ability and desire to work on-site in a manufacturing environment
• Ability to effectively communicate to multiple levels of the organization, both verbally and through written communication
• Ability to productively manage multiple projects concurrently
• Self-motivated and self-driven

Essential Functions

• Create documentation that outlines various manufacturing processes (methods writing)
• Document industrialization standards and best practices (standards writing)
• Work with Operators and Engineers to document processes and best practices
• Execute hands-on development of inspections and validations of processes
• Identify and eliminate waste
• Incorporate lean manufacturing principles, quality, and documentation

This role is restricted to U.S. persons due to access to export-controlled technology (U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act).

MAU Workforce Solutions is an innovative global company with extensive experience providing solutions for success in staffing, recruiting, technology and outsourcing to our clients, employees, and applicants. Headquartered in Augusta, GA since 1973, MAU is a family and minority-owned company offering better processes and better people to create efficiencies and greater profits for our clients. Our relationships with world-class companies, our training programs and our culture of family allow MAU to offer better results, better jobs, and better lives to those who work with us.

All Applicants must submit to background check and drug screening

Disclaimer: This job description is not designed to be a complete list of all duties and responsibilities required of the position

EOE

About Abel Richard

Abel Richard is an ultra-luxury Maison redefining modern refinement. With operations based in Scottsdale, Arizona, the brand specializes in luxury handbags and fine writing instruments, including Montegrappa, one of the world’s most storied and respected luxury pen houses, alongside rare, limited-edition creations that seamlessly blend technology, high-tech material innovation, personality, and purpose.

Through its partnership with Montegrappa, Abel Richard brings forward a legacy of Italian craftsmanship, precision engineering, and artistic expression celebrating writing instruments as objects of culture, heritage, and design. Each piece reflects an uncompromising commitment to quality, individuality, and timeless sophistication.

Rooted in craftsmanship and driven by design excellence, Abel Richard creates objects that go beyond function. Every component tells a story. Every silhouette is a conversation starter. As the Maison continues to expand its presence across key luxury markets, Abel Richard remains focused on elevating customer experience, brand storytelling, and modern luxury across every touchpoint.

Position Summary

The Operations & Project Manager improves how Abel Richard runs day to day and delivers cross-functional projects that move the business forward. This role builds scalable processes, strengthens operational controls, and drives execution across teams. You’ll partner closely with Logistics, Training, and external vendors to optimize workflows and reporting using NetSuite (ERP) and Lightspeed X-Series (POS), ensuring clean data, consistent operating standards, and reliable visibility into performance.

Essential Functions and Responsibilities

Operational Execution and Continuous Improvement

• Own and improve core operating processes across the company (workflow design, SOPs, documentation, and rollouts).
• Identify operational gaps and inefficiencies; recommend solutions and lead implementation with measurable outcomes.
• Establish operating rhythms that keep work moving (issue tracking, decision logs, stakeholder updates, and follow-ups).
• Build and maintain simple dashboards and reporting to monitor operational performance and support leadership decisions.

Project Management

• Lead cross-functional projects end-to-end: scope, requirements, timeline, budget (when applicable), execution, and closeout.
• Develop project plans, workback schedules, meeting notes, and status reports that clearly show progress, risks, and next steps.
• Facilitate stakeholder meetings that drive decisions, accountability, and follow-through.
• Proactively identify blockers and dependencies; escalate early with clear options and recommendations.
• Manage multiple initiatives at once while maintaining strong attention to detail and deadlines.

Systems Enablement: NetSuite and Lightspeed X-Series

• Support and improve operational workflows across NetSuite and Lightspeed X-Series, partnering with functional owners and vendors as needed.
• Coordinate system changes that impact operations: requirements gathering, testing/UAT, training support, rollout planning, and post-launch cleanup.
• Document and maintain standards for key workflows (examples: item/SKU setup, pricing, purchasing/receiving, transfers, returns/exchanges, and reporting definitions).
• Support data accuracy and governance by partnering with Retail and Finance on process adherence and root-cause fixes.
• Improve reporting consistency and “single source of truth” metrics across POS and ERP data.

Vendor Coordination and Operational Support

• Manage and monitor operations-related vendors (service providers, systems partners, and operational suppliers), including performance tracking and issue resolution.
• Coordinate purchasing and vendor workflows with Finance (invoice matching support, documentation, approvals, and renewal tracking).
• Maintain operational readiness for peak periods, launches, and company-wide changes.

Internal Controls, Compliance Support, and Documentation

• Maintain operational documentation with strong version control (SOPs, forms, checklists, training guides).
• Support internal controls through consistent processes and audit-ready records (examples: access controls, vendor documentation, invoice controls, and incident documentation).
• Coordinate training and communication for new processes and changes to ensure adoption and consistent execution.

Cross-Functional Partnership

• Partner with Retail Leadership to ensure corporate initiatives are practical, adopted, and supported with clear documentation and training.
• Partner with Finance on reporting needs, purchasing controls, and operational metrics.

Required Qualifications

• Bachelor’s degree in operations, business, project management, or related field, or equivalent experience.
• 3–6+ years of experience in operations and/or project management with cross-functional stakeholders.
• Proven ability to drive projects to completion with clear communication, timelines, and accountability.
• Strong documentation skills (SOPs, process flows, training guides, and internal communications).
• Proficiency with spreadsheets and comfort working with operational data and reporting.
• Retail, luxury, hospitality, or multi-site operations experience.

Preferred Qualifications (Luxury-Retail Leaning)

• Experience in luxury, premium, or high-touch retail (or similarly detail-driven environments like fine jewelry, premium fashion, beauty, or hospitality) supporting multi-department operations.
• Experience supporting or improving workflows in NetSuite and/or Lightspeed X-Series (ERP/POS), ideally in a retail environment with high SKU integrity and frequent item/pricing updates.
• Strong understanding of retail inventory controls and data governance: item/SKU attributes (style, color, material), pricing rules, tax mapping, role-based permissions, and audit trails.
• Familiarity with operational standards tied to premium customer experience: returns/exchanges controls, fulfillment/shipping standards, appointment or clienteling support processes, and exception handling.
• PMP, CAPM, or similar certification (nice to have, not required).

Skills and Competencies (Luxury Standards + Execution)

• High attention to detail and quality; notices what’s “off” and fixes it before it becomes a customer issue.
• Strong organization and follow-through; closes loops, protects deadlines, and keeps stakeholders accountable.
• Clear communicator who can coordinate across Retail, Finance, and vendors without confusion or dropped handoffs.
• Strong operational judgment and discretion with sensitive business information and high-value product processes.
• Process-minded problem solver who builds scalable workflows (not one-off workarounds).
• Calm under pressure during launches, peak periods, and system/process changes.

Physical and Working Conditions

• Primarily office-based with periodic travel to boutique locations as needed.
• Occasional evenings/weekends during launches, operational cutovers, inventory events, or urgent business needs.
• May periodically work on-site in boutique back-of-house settings (shipping/receiving areas, stockrooms) to support operational rollouts and troubleshooting.

Performance Expectations (Luxury Retail Outcomes)

• Projects delivered on time with clear ownership, measurable outcomes, and minimal rework.
• Stronger operational consistency across locations through SOPs and rollouts that teams actually adopt.
• Improved inventory accuracy and exception reduction (fewer missing/incorrect SKUs, cleaner transfers/receiving, fewer reconciliation issues).
• Increased reliability of reporting across NetSuite and Lightspeed X-Series, with clear definitions and fewer “numbers don’t match” moments.
• Faster resolution of operational issues impacting boutique readiness and customer experience (returns, transfers, item setup, pricing, and fulfillment errors).
• Leadership has clear visibility into priorities, risks, and operational performance through concise, consistent updates.

Why Join Us

At Abel Richard, operations are not “behind the scenes.” It’s a key part of delivering a luxury experience that feels consistent, effortless, and personal every time a client interacts with our brand. In this role, you’ll help build the systems, processes, and operating discipline that support our boutiques, teams, and growth. You’ll work closely with leadership, have real ownership, and see your work show up in how the business runs day to day.

We offer competitive compensation, clear priorities, and the opportunity to grow with a brand that’s scaling thoughtfully.

Our Commitment

Abel Richard is an equal opportunity employer. We’re committed to creating an inclusive environment where people are treated with respect and have the support they need to succeed. We consider applicants without regard to race, color, religion, sex, pregnancy, gender identity or expression, sexual orientation, national origin, ancestry, age, disability, genetic information, military or veteran status, or any other status protected by applicable law.

Open date: October 6, 2025

Next review date: Monday, Mar 23, 2026 at 11:59pm (Pacific Time)

Apply by this date to ensure full consideration by the committee.

Final date: Monday, Oct 5, 2026 at 11:59pm (Pacific Time)

Applications will continue to be accepted until this date, but those received after the review date will only be considered if the position has not yet been filled.

UC Berkeley Extension (UNEX), the continuing education branch of the University of California, Berkeley, has been building bridges between UC Berkeley and the public since 1891. UNEX serves the professional and continuing education goals of thousands of people each year and plays an essential part of the University mission to: extend the research and scholarship of UC Berkeley to a global community; increase access to higher education for non-traditional, online, and international students; and improve the workforce. UC Berkeley Extension is a part of the division under the leadership of the Dean of Extended Education that also includes Berkeley Summer Sessions, Berkeley Study Abroad, and Osher Lifelong Learning Institute.

UC Berkeley Extension invites applications for a pool of qualified, dynamic instructors with a commitment to undergraduate, professional, and continuing education in Psychology, Public Health, Ethics, and Diversity to teach one or more online courses each year for our Health Sciences department.

All courses are offered online, and we seek qualified applicants who are available to teach in both synchronous and asynchronous online formats.

• 
  
• Online instruction is delivered asynchronously through our learning management system (Canvas) or through synchronous live lectures (Zoom).
  
• Most synchronous live online lecture courses are offered in the evening and on the weekend (U.S.A. Pacific Time).
  

We seek qualified applicants who possess current subject matter expertise and/or teaching knowledge in (but not limited to) the following course subjects . For program and course descriptions, please refer to the departmental link below.

Psychology

• 
  
• Abnormal Psychology
  
• Adolescent Psychology
  
• Biological Psychology
  
• Coaching/Consulting Psychology
  
• Clinical Interventions in Psychology
  
• Clinical Psychopharmacology
  
• Cognitive Psychology
  
• Developmental Psychology Across the Lifespan
  
• Emerging Adulthood
  
• General Psychology
  
• Health Psychology
  
• Industrial and Organizational Psychology
  
• Neuropsychology
  
• Nutritional Psychology
  
• Positive Psychology
  
• Psychology of Communication
  
• Psychology of Personality
  
• Research Methods in Psychology
  
• Social Psychology
  
• Other Psychology course subjects (please specify in your teaching statement)
  

Public Health, Sociology, Ethics, & Diversity

• 
  
• Bioethics
  
• Epidemiology
  
• Global Health
  
• Healthcare Advocacy and the Role of Cultural Diversity
  
• Introduction to Public Health
  
• Sociology of Health, Illness, and Medicine
  
• Other Public Health, Sociology, Ethics, & Diversity course subjects (please specify in your teaching statement)
  

The department seeks candidates who can support the success of all students through inclusive curriculum, classroom environment, and pedagogy. Specific duties and expectations will vary depending on the method of instruction including: Synchronous Live Online (Zoom); or Asynchronous Online (Fixed Date or Start Anytime).

• 
  
• For synchronous instruction (live online courses), duties include but are not limited to: syllabus development; assignment development; lesson planning for class meetings; preparing and submitting required texts and course materials; reviewing and updating Canvas course site; and delivering lectures, presentations, and learning activities for all required hours of instruction.
  
• For asynchronous instruction (fixed date or start anytime online courses), duties include but are not limited to: reviewing the syllabus and pre-populated online course content; learning and utilizing Canvas classroom management tools; and requesting any training needs from the Program Director or Department Director.
  
• For all instruction (regardless of course format) duties include but are not limited to: completing required trainings as mandated by the UC Presidential policies; responding to student questions and learning needs in a timely manner; grading student assignments and posting final student grades to the instructor portal in a timely manner; utilizing University-approved course support platforms including the Canvas Learning Management System, Zoom, Instructor Portal, Google Workspace, etc.; reviewing and following University and departmental policies, logistics, and other guidelines as published on the departmental Instructional Resource Site; and responding to other requests from the Program Director or Department Director in a timely manner.
  

Post-Baccalaureate Program in Psychology: public/category/ ?method=load&certificateId=17037&selectedProgramAreaId=11462&selectedProgramStreamId=15564

Behavioral Health Courses: academic-areas/behavioral-health-sciences/#!?tab=courses

• 
  
• Doctorate degree or equivalent international degree.
  

• 
  
• 
  U.S.A. Residency and U.S.A. Work Authorization: All work must be performed in the United States, whether in person or online. For applicants who are not US citizens or permanent residents, a valid US work authorization is required for the duration of employment. Applicants should not expect the department to sponsor a work visa on their behalf.
  

• 
  
• 3 or more years of professional industry and/or academic work experience in the course subject.
  
• 3 or more years of undergraduate-level teaching experience (as the primary instructor) in the course subject.
  
• Experience teaching at a U.S. college/university institution.
  
• Experience in creating syllabi, learning objectives, lectures/presentations, learning activities, assignments, assessments, exams, and quizzes.
  
• Experience teaching online and/or developing academic content for online courses.
  
• Ability to convey conceptual and complex ideas and information.
  
• Ability to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.
  
• Effective verbal/written communication and presentation skills (English).
  
• Effective organizational skills with attention to detail.
  
• Ability to collaborate with colleagues and work within a team environment.
  
• Proficiency in (or willingness to learn) instructional and other technology, such as: Learning Management Systems (Canvas); lecture/presentation capture applications (Panopto); online video conferencing (Zoom); Microsoft Office (Word and PowerPoint); file sharing (Google drive or Dropbox); and Google Workspace tools (email, calendar, docs, sheets, slides, etc).
  

• Curriculum Vitae - Your most recently updated C.V.

  
  

• Statement of Teaching - Please discuss prior teaching experience, teaching approach, and other/future teaching interests. This can include, for example, specific efforts, accomplishments, and future plans to support the success of all students through inclusive curriculum, classroom environment, and pedagogy.

  
  

• Examples of Recent Syllabi - Please combine all documents into a single PDF and upload them.

  
  

• Examples of Recent Teaching Evaluations - Please combine all documents into a single PDF and upload them.

  
  

• 
  
• References are requested from candidates at the interviewing stage, and references are only contacted for finalists.
  

Help contact:

UC Berkeley is committed to diversity, equity, inclusion, and belonging in our public mission of research, teaching, and service, consistent with UC Regents Policy 4400 and University of California Academic Personnel policy (APM 210 1-d). These values are embedded in our Principles of Community, which reflect our passion for critical inquiry, debate, discovery and innovation, and our deep commitment to contributing to a better world. Every member of the UC Berkeley community has a role in sustaining a safe, caring and humane environment in which these values can thrive.

The University of California, Berkeley is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, age, or protected veteran status.

For more information, please refer to the University of California's Affirmative Action and Nondiscrimination in Employment Policy and the University of California's Anti-Discrimination Policy.

In searches when letters of reference are required all letters will be treated as confidential per University of California policy and California state law. Please refer potential referees, including when letters are provided via a third party (i.e., dossier service or career center), to the UC Berkeley statement of confidentiality prior to submitting their letter.

As a University employee, you will be required to comply with all applicable University policies and/or collective bargaining agreements, as may be amended from time to time. Federal, state, or local government directives may impose additional requirements.

Unless stated otherwise, unambiguously, in the position description, this position does not include sponsorship of a new consular H-1B visa petition that would require payment of the $100,000 supplemental fee.

As a condition of employment, the finalist will be required to disclose if they are subject to any final administrative or judicial decisions within the last seven years determining that they committed any misconduct.

• 
  
• "Misconduct" means any violation of the policies or laws governing conduct at the applicant's previous place of employment, including, but not limited to, violations of policies or laws prohibiting sexual harassment, sexual assault, or other forms of harassment or discrimination, as defined by the employer.
  
• UC Sexual Violence and Sexual Harassment Policy
  
• UC Anti-Discrimination Policy
  
• APM - 035: Affirmative Action and Nondiscrimination in Employment
  

By applying, you consent to your information being transmitted to the Employer by SonicJobs.
See SonicJobs Terms & Conditions at and Privacy Policy at and SonicJobs Privacy Policy at and Terms of Use at

The Housing Authority of Kansas City, Missouri is seeking qualified candidates for the position of Apartment Maintenance Mechanic II. Our Apartment Maintenance Mechanic II's are responsible for skilled maintenance of buildings, facilities, grounds, and light equipment. Performs carpentry, electrical, plumbing, welding, and general repairs in response to service requests and results of inspections of units in accordance with Uniform Physical Conditions Standards (UPCS) or other HUD required standards. Performs maintenance on mechanical equipment or machinery. All maintenance tasks are performed as assigned in accordance with appropriate level of skill and/or experience. (A full job description at )

EXAMPLES OF ESSENTIAL FUNCTIONS

Essential Duties and Responsibilities

The duties listed below illustrate of the various types of work that may be performed. The omission of specific statements regarding duties does not exclude them from the position if the work is similar, related, or a logical assignment in association with this position. Undertakes and performs the following and all other work-related duties as assigned.

1. Diagnoses problems and makes general repairs to the interior/exterior of buildings and facilities and maintains furniture and equipment pursuant to UPCS in the fields of plumbing, carpentry, electrical, mechanical, and related trades.

2. Assists in inspecting damage to Authority-owned properties. May make determinations regarding tenant responsibility for repairs and work with supervisor to assess tenant charges according to the Authority protocol.

3. Performs rough carpentry work including installation/repair of entry doors, sliding doors, interior doors, interior framing and/or repair of wall partitions, installation of wall gypsum board and building insulation.

4. Performs finished carpentry including window and door trims and repair, replacement of wood/vinyl base trim, installation of wood trim millwork, installation and/or replacement of new kitchen and bathroom cabinetry, repair of cabinets, preparation and installation of new flooring, preparation and installation/repair of wall/floor tile.

5. Performs electrical work including installation and repair of wiring, troubleshooting and replacement of existing switches and outlets, replacement of circuit breakers, replacement of light fixtures, and other electrical repairs.

6. Repairs and maintains plumbing systems by performing general work including rough piping for domestic water and sanitary sewer, repair/replacement/installation of plumbing fixtures such as sinks and bathtubs, installation of valves for shower, kitchen, and bath, replacing washers, mending burst pipes, repairing leaks, opening clogged drains, and performing other appropriate repairs/installations to meet or exceed housing quality standards.

7. Makes repairs and adjustments to various appliances and equipment (e.g., furnaces, dishwashers, stoves, water heaters, refrigerators, electric motors, smoke detectors, etc.) and replaces appliances and equipment when necessary.

8. Performs general interior and exterior repairs including structural components (e.g., stairways, floor joists, and rafters), roof repairs (e.g., replacement, flashing repair, etc.), foundation waterproofing, masonry and concrete replacement/repair (e.g., walks, brick, paving, steps, curbing), repair/replacement of gutters, downspouts, garage doors, fences, gates, doors, windows, doorbells, peepholes, signs, clotheslines, fans, belts, and insulation. Changes the lock(s) in accordance with Authority procedures and makes or has made any necessary keys.

9. Starts, operates, and checks for safety and appropriate maintenance on a wide variety of small engines, hand tools, pumps, chain saws, and Authority maintenance vehicles.

10. May maintain and make general repairs to power tools and equipment such as chain saws, pumps, and vehicles, which includes checking and maintaining lubricant levels, timing, replacing, and adjusting worn or damaged parts.

11. May install HVAC systems. Maintains HVAC equipment and systems by performing a full range of preventive maintenance and restoring and repairing faulty or inoperative systems and associated equipment in accordance with blueprints, piping and wiring diagrams, and manufacturers’ specifications.

EDUCATION AND EXPERIENCE

High school graduate (or GED) or possess a vocational technician certification beyond high school, with two (2) years’ experience or training in building construction or maintenance, or in the repair or maintenance of mechanical equipment or an equivalent combination of technical training and experience. EPA certification preferred.

OTHER REQUIREMENT

1. Must possess a valid driver’s license.

2. Must be able to lift 50-75 lbs.

Compensation details: 2 Hourly Wage

PI6eee42bf4f87-31181-36497550

• Responsible for updates, upgrades and maintenance of the following systems: Rail Operations Control System (ROCS); Predictive Arrival and Departure System (PADS), Positive Train Control (PTC) back-office systems, Traction Power Supervisory Control and Data Acquisition (SCADA) System and Rail Scheduling.
• Perform Quality Assurances and system engineering support of all back off systems including PTC office systems, Back Office Server (BOS), Rail Operations Control System (ROCS), Network Management System (NMS); Interoperable Train Control Message Server (ITCMS); Wayside Status Relay Service (WSRS), and the interfaces to all other operational systems.
• Develop, document, and maintain Standard Operating Procedures (SOPs), technical standards, and best practices for all train control and related systems to ensure consistency, safety, and regulatory compliance.
• Develop and implement training programs to upskill staff, mentoring team members at all levels on train control systems, operational procedures, and project management to strengthen technical capacity, foster skill development, and ensure succession planning. 
• Ensure Caltrain systems meet Federal Railroad Administration (FRA) mandated interoperability requirements with all tenant railroads; ensure Caltrain train control systems are compatible with Association of American Railroads (AAR) standards; follow the ITC guidelines that Caltrain must maintain ?N-2? backwards compatible software versions.
• Manage complex and large-scale train control engineering projects as the Technical Lead for Caltrain. 
• Manage the work of outside contractors and assist higher level Caltrain Directors and Executives in planning and evaluating the quantity and quality of work performed by subordinate staff.
• Supervise staff.  Hire, mentor, and take appropriate corrective and/or disciplinary action.  Ensure EEO policies and procedures are followed. Participate in selection of staff.  Coordinate staff training and professional development. Establish performance objectives. Monitor and evaluate employee performance.

• Establish and maintain work relationships with internal and external stakeholders to develop consensus on capital project work plans.
• Establish schedules and methods for providing train control system engineering design services on assigned capital projects; identify resource needs; review needs with appropriate management staff; allocate resources accordingly.
• Review and approve project schedules; assist in strategic planning; prepare status reports; coordinate project resources; communicate with all project participants on relevant issues; identify and resolve train control engineering issues.
• Provide general technical oversight of railroad train control systems.
• Perform system usage and performance analyses. 
• Support Caltrain Configuration Management (CM) Manager on configuration control, prioritize system defects and corrective actions; participate in Configuration Control Board (CCB) meetings as required.
• Direct, review, and approve the preparation of train control engineering designs, drawings, and specifications; identify and resolve technical engineering issues.
• Manage technical elements of the office systems warranty and long-term maintenance support service agreements.
• Review and approve operating manuals and procedures developed by various systems providers or vendors.
• Manage all technology refresh and software upgrades/updates and associated testing without interrupting regular railroad operations.
• Establish and lead a knowledge management framework to systematically capture, update, and share institutional knowledge through structured documentation, training programs, and knowledge transfer initiatives.
• Participate in the preparation and administration of the train control engineering program budget (Operating & Maintenance, and Capital); submit budget recommendations; monitor expenditures.
• Review consultant proposals and designs; recommend awards; conduct or participate in the pre-bid conferences prior to system contract awards.
• Perform all job duties and responsibilities in a safe manner to protect one?s self, fellow employees, and the public from injury or harm. Promote safety awareness and follow safety procedures in an effort to reduce or eliminate accidents.
• Perform other duties as assigned.

Sufficient experience, training and/or education to demonstrate the knowledge and ability to successfully perform the essential functions of the position. In lieu of a degree, work-related experience that demonstrates the skills and experience necessary to perform this role will be accepted. Development of the required knowledge and abilities is typically obtained through but not limited to:

• Bachelor?s degree in electrical/electronics, computer science, or a related field.
• Five (5) years of railroad industry experience in Train Control System and SCADA system development and maintenance.
• Two (2) years supervisory experience

• Knowledge and experience with AIMCore Product/Software a plus.
• Possesses a broad interdisciplinary knowledge of supervisory train control, wayside signal, highway crossing warning system, predictive and arrival system, traffic signal control, traction power substations and distribution, SCADA, server systems, virtualized server architectures, databases, cloud server systems, networking, etc.
• Knowledge of operating systems (UNIX, Linux, Microsoft)
• Knowledge of VHF and UHF radio voice and data communications, information assurance, data security and networking technologies.
• Experience with Configuration Management and Quality Assurance Systems.
• Ability to Interpret and revise engineering plans, drawings, and specifications.
• Proficient with Microsoft Office Suite.
• Effective oral and written communication skills.

PI282632635

Business Overview

KINESSO is the technology-driven performance marketing agency providing actionable growth for both our agency partners and clients. We turn 'action' into 'outcome' for our clients, leveraging our unique capabilities in optimization, analytics, AI, and experimentation. KINESSO has brought together the collective power of what was formerly Matterkind, Reprise, P3, and Kinesso under one collective entity that will serve as the most powerful delivery engine in the industry. We have extensive offerings spanning across performance marketing and data and technology. Fueled by a deep understanding of consumer behavior, we offer an end-to-end engine of planning and optimization while also delivering on data-driven strategy for social platforms, actionable growth in e-commerce, and creating curated marketplaces specific to each client's function and needs. The company has more than 6,000 employees operating in more than 60 countries. Learn more at Summary

The Addressable Activation department serve as KINESSO's hands-on-keyboard platform experts, focusing on all aspects of successful campaign execution and stewardship. The Manager is accountable for the performance & pacing of their assigned brand(s) and customizes departmental standards & process to fit client needs. They act as a point of escalation and are the go-to experts both internally and externally for matters of complex setup, optimization, and platform nuances. Successful applicants must have a deep expertise across a variety of client KPIs and buying platforms. Examples include DV360, Adwords, The Trade Desk, Roku, Vistar, Facebook, Snapchat, etc. A history of team management/mentorship and a comfort with internal/external-facing communication are a must!

Customer/Client Management: Owns the execution and day-to-day management of a portion of a client assignment, based on specialized or technical knowledge

* Vendor Relationship Management: Leads the vendor strategy; has experience and industry knowledge to identify vendors for key needs. Approves vendor selections and scopes

* Discipline-Specific Tasks: Owns oversight of junior team members; defines optimization parameters at the campaign level, vets optimization suggestions from partners, attends internal status meetings to speak to optimizations, pacing, and performance

* Platform Reporting: Works with team on development of reporting dashboards; ensures clean, accurate, and actionable client reporting

* Solutions Innovation: Identifies and delivers new audience-based addressable solutions to drive business growth; masters growth initiatives across the company

* Provides day-to-day supervision to a team including reviewing work, coaching on performance, coordinating activities, checking on quality and work progress; generally managing within one account, or multiple small accounts

* Evaluates information and leverages experience to identify and solve on-going or complex problems

* Requires understanding of the industry, processes, procedures and systems within own and related areas

Proven track-record of successfully seeking out and curating new business relationships and/or solutions; developing solutions using new or existing processes

* Experience building team, providing mentorship and navigating how to manage up/down/ laterally (e.g., ability to navigate and be effective with multiple personalities)

* Intermediate knowledge of technology or measurement ad tech solutions, including platforms

* Intermediate knowledge and skills in data analysis

* Confident collaborating with others

* Experience with Project / Account Management

* Advanced communication skills; clear and succinct communication

Advanced ability to anticipate, recognize and clearly define problems using various techniques to systematically analyze, weigh alternatives and propose solutions

* Experience with managing existing business relationships, partnerships, and alliances internally and externally

* Ability to assess and rank issues and tasks in order of importance for taking action

* Has gained prior experience in actual situations to recognize recurring meaningful components

* Applies a solid foundation to varying situations

* Applies advanced knowledge and perceives deviations from the normal pattern

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family. The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

It is the policy of our company, division of the Interpublic group, to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position, please .

Come and join the magic with Aulani, A Disney Resort and Spa! Perks and benefits may include:

Tuition paid upfront at network schoolsFree lunchFree parkingFree theme park admission and much more! Assist in the daily operations of one or more of the following highly themed Merchandise locations at Aulani, A Disney Resort & Spa.

Apply to this position to be considered for a Merchandise Cast Member! Kālepa's Store
- Located near the lobby, this is a convenient place for our guests to purchase groceries, sundries and vacation essentials for the whole 'ohana.

Merchandise at this location features artisanal island delights that tell the story of Aulani Resort and its celebration of Hawaiian culture.

Hale Manu
- Located near the lobby, this upscale boutique allows guests to discover high-end fashion and island flair.

From authentic Hawaiian-made products and gifts to jewelry and designer sunglasses , our guests are bound to leave with something luxurious.The Lava Shack
- This convenient poolside shop offers swimwear, beach toys, snacks, beverages, and more.Special Events, Pop-Up Locations & Carts
- Whether its vending merchandise outside on the beach, setting up and breaking down " Pop-Up" locations, or interacting with our guests underneath the stars during 'Ohana Movie Nights, these mobile shops are examples of how we bring magic to our guests!Responsibilities : Enhance the guest experience during their stay through strong product awareness, proactive selling techniques and a positive demeanor.

Be prepared to work both indoors and outdoors supporting either a retail location or a merchandise cart.

Guest Service
- Proactively approaches all guests and offers options while increasing revenue opportunities.

Greeter
- Greet and thank each guest as they enter and exit the location; assist with directions, event schedules, provide samples, and other information requested by guests as necessary.

Retail Agent
- Process merchandise transactions following proper POS procedures; select locations may have you selling bottled liquor.

Pin Trader/Hat/Leather Personalization
- Share pin trading knowledge, embroider guest names on hat products purchased, and engrave guest names on pre-determined leather items.

Grocery Delivery
- Responsible for overall delivery of grocery items to all Guest rooms throughout the Resort.

Stock Receiver – Unloads and processes both hard-line and soft-line product by demonstrating the ability to meet and/or exceed productivity standards.

Demonstrate working knowledge and application of producing product to floor-ready visual standards.Stock Runner
- Responsible for straightening and detailing product by zone, accurately identifying out-of-stock product by utilizing the merchandise handheld, accurately picking product via merchandise stockroom, successfully communicate out-of-stocks via logistics board and fulfill product to the sales fixture by demonstrating the ability to meet and/or exceed productivity standards.

This process will occur throughout the day.

Basic Qualifications :Follow Open/Close procedures for cashiering role, including, but not limited to counting out and balancing of funds at beginning and end of shifts.Follow proper cash handling procedures.Adhere to loss prevention guidelines.May also be asked to work in specialized areas, as needed, additional training required.

Preferred Qualifications:Basic mathematical skills are necessary.Sales experience helpful, and/or feeling comfortable with suggestive selling.Knowledge of Hawaiian/Japanese language preferred.

Additional Information : SCHEDULE AVAILABILTY Part-Time: Must be available all Saturday, Sunday, and Holidays.

Must be available to work up to 40 hours per week during training.SUBMITTING YOUR APPLICATION After clicking "Apply for this job" below, the employment application will open in a new window.

Please complete ALL pages of the application by clicking "Next" on each page, then "Submit" on the final page.Keyword: Aulani Casting, aulanicastingThe pay rate for this role in Hawaii is $29.17 per hour.

Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits, dependent on the level and position offered.

To learn more about our benefits visit:

Annapolis Micro Systems, Inc. is the leader in COTS FPGA based computing. We have a unique and well-established product base and an exciting future in this growing market. Join our team of talented hardware and software professionals as we build and increase our presence in the Digital Signal Processing market space. Become a key part of a growing company able to design, manufacture, test, and support its own products.

As the Senior Design Engineer, you will develop, maintain and test high-performance FPGA computing systems. Your responsibilities will include designing behavioral VHDL/Java models, designing and testing VHDL/Java to interface between FPGAs and I/O devices, creating VHDL, Java, and C examples, and working with customers. You will work with leading-edge high-speed analog and digital interfaces, and a variety of hardware platforms including PCI Express, VME, VPX, Blade, and uTCA. You will also have the opportunity to interact directly with our customers in support of the many exciting applications they implement using the FPGA computing products that you have helped create.

Enjoy the benefits of working for a small privately-held company with on-site production test, manufacturing, hardware, and software design. The close coupling of all aspects of design and production under one roof allows us to create ultra-high performance products and systems at a rapid pace while maintaining the highest possible quality. Daily interaction with other departments provides a first-rate opportunity to further develop your career.

Join us and become part of the future of computing technology!

Essential Duties and Responsibilities

• Develop FPGA interfaces to SRAM/DRAM, Multi-Gigabit Transceivers, ADCs/DACs
• Create example applications showcasing features of our FPGA platforms
• Create digital logic cores using Java for use in our CoreFire software tool
• Create and maintain documentation for the interfaces and applications you develop
• Strive to continuously improve the quality and reliability of our products
• Work with customers to help them successful with our products
• Teach customers how to use our VHDL models framework and software
• Design for the latest and future Xilinx and Altera FPGAs
• Learn from and work side-by-side the world’s top-notch FPGA experts!

Requirements

• Bachelors Degree in Electrical or Computer Engineering
• Preferred Masters Degree
• Proficient in VHDL, Java, and C
• Experience in VHDL and hardware design
• Knowledge of Xilinx FPGAs, Altera FPGAs, EDA design tools and architectures
• Experience in VME, PCIe, Blade, VPX, and uTCA system
• US Citizenship

Job Description Summary

Entity

Worker Type

Worker Sub-Type?

Cost Center

Pay Rate Type

Pay Grade

Scheduled Weekly Hours

Work Shift

Job Description

Hours per week:   36

Scheduled Work Hours/Shift:   3-12 hour shifts; 630a-7p. Rotating weekends, holidays, and call.

$10k Sign-On Bonus for CSTs with 1-year of experience.

Job Summary/Purpose:

The Licensed Practical Nurse-Surgical Tech (LPN-ST) reports to the RN Team Coordinator.  Under direction of a Registered Nurse, the LPN-ST provides individualized, goal directed and family centered patient care and functions as a member of the operating room team to prepare sterile supplies, instrumentation and equipment used in surgical procedures and performs appropriate room duties involved with the direct patient care with adherence to established procedural guidelines.  The LPN-ST demonstrates proficiency according to the Laws governing nursing in South Carolina. This position delivers safe and effective care and interacts with other members of the health care team to achieve desired results and outcomes.  This position will require the use of the LPN’s skills in multiple physical locations under MUSC Health.

Under the supervision of the Nurse Manager, the Certified Surgical Tech follows established procedural guides in the preparation of sterile supplies and equipment used in the surgical procedures, performs appropriate room duties involved with direct patient care, and functions autonomously as a member of the operating room team.  Demonstrates knowledge and skills required to provide care and/or service appropriate to the level of development of patients, with consideration of the needs of patients’ families. 

Minimum Training and Education: 

Graduation from a recognized Licensed Practical Nursing program and licensed as an LPN within the state of South Carolina or a compact state. One year of LPN experience preferred. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider.

High School Diploma. Graduation from an accredited school of surgical technology or surgical technology military program.  At least one year of work experience as a Certified Surgical Tech required. The CST II is expected to demonstrate knowledge, skills and behaviors consistent with competent practice.  Competency develops when candidates utilize higher level critical thinking and problem-solving skills.  They should possess advanced relevant surgical skills for area of practice and apply their knowledge to emergency situations as they may arise in the operating room.  Competent CST II’s use conscious, abstract reasoning and problem solving in planning collaboration with their peers to assess the needs of the patient and surgeon during the surgical procedure.  Competent CST II’s practice autonomously in assisting with other duties such as assisting providers and nurses with vaginal deliveries, supply restocking, instrument flow, front desk customer service and engagement.  Competent CST II’s are essential to the organization because of their efficiency, ability to set priorities and confidence in managing most situations within their clinical specialty.  CST II’s may remain at a competent level indefinitely throughout their career.

Required Licensure, Certifications, Registrations: 

Licensed as an LPN within the state of South Carolina or a compact state. Current Basic Life Support (BLS) required, either a certification from an American Heart Association (AHA) BLS for Healthcare Providers (or AHA recognized equivalent) or an American Red Cross CPR/AED for Professional Rescuer and Healthcare Provider.

Incumbent must hold and maintain the Certified Surgical Technologist credential administered by the National Board of Surgical Technology and Surgical Assisting, (formerly LCC-ST).  A current CPR card is required; either an American Heart Association Basic Life Support (BLS) for Healthcare Providers card or an American Red Cross Professional Rescuer card required.

Additional Job Description

Physical and Mental Requirements:  Ability to perform job functions while standing. (Continuous) Ability to perform job functions while sitting. (Continuous) Ability to perform job functions while walking. (Continuous) Ability to climb stairs. (Infrequent) Ability to work indoors. (Continuous) Ability to work outside in temperature extremes. (Infrequent) Ability to work from elevated areas. (Frequent) Ability to work in confined/cramped spaces. (Frequent) Ability to perform job functions from kneeling positions. (Infrequent) Ability to bend at the waist. (Continuous) Ability to twist at the waist. (Frequent) Ability to squat and perform job functions. (Frequent) Ability to perform "pinching" operations. (Frequent) Ability to perform gross motor activities with fingers and hands. (Continuous) Ability to perform firm grasping with fingers and hands. (Continuous) Ability to perform fine manipulation with fingers and hands. (Continuous) Ability to reach overhead. (Frequent) Ability to perform repetitive motions with hands/wrists/elbows and shoulders. (Continuous) Ability to fully use both legs. (Continuous) Ability to use lower extremities for balance and coordination. (Frequent) Ability to reach in all directions. (Continuous) Ability to lift and carry 50 lbs. unassisted. (Infrequent) Ability to lift/lower objects 50 lbs. from/to floor from/to 36 inches unassisted. (Infrequent) Ability to lift from 36" to overhead 25 lbs. (Infrequent) Ability to exert up to 50 lbs. of force. (Frequent) Examples include: To transfer a 100 lb. patient that cannot assist in the transfer requires 50 lbs. of force. For every 100 additional pounds, assistance will be required from another healthcare worker. 20 lbs. of force is needed to push a 400 lb. patient in a wheelchair on carpet. 25 lbs. of force is required to push a stretcher with a patient with one hand. Ability to maintain 20/40 vision, corrected, in one eye or with both eyes. (Continuous) Ability to see and recognize objects close at hand or at a distance. (Continuous) Ability to match or discriminate between colors. (Continuous) Ability to determine distance/relationship between objects; depth perception. (Continuous) Good peripheral vision capabilities. (Continuous) Ability to maintain hearing acuity, with correction. (Continuous) Ability to perform gross motor functions with frequent fine motor movements. (Continuous) Ability to deal effectively with stressful situations. (Continuous) Ability to work rotating shifts. (Frequent) Ability to work overtime as required. (Frequent) Ability to work in a latex safe environment. (Continuous) Ability to maintain tactile sensory functions. (Continuous) (Selected Positions) *Ability to maintain good olfactory sensory function. (Continuous) *(Selected Positions) *Ability to be qualified physically for respirator use, initially and as required. (Continuous) (Selected Positions)

If you like working with energetic enthusiastic individuals, you will enjoy your career with us!

The Medical University of South Carolina is an Equal Opportunity Employer. MUSC does not discriminate on the basis of race, color, religion or belief, age, sex, national origin, gender identity, sexual orientation, disability, protected veteran status, family or parental status, or any other status protected by state laws and/or federal regulations. All qualified applicants are encouraged to apply and will receive consideration for employment based upon applicable qualifications, merit and business need.

Medical University of South Carolina participates in the federal E-Verify program to confirm the identity and employment authorization of all newly hired employees. For further information about the E-Verify program, please click here: