Crd Engineering Standards Jobs in Usa

We are looking for a Project Manager to work on-site at a client facility in Sistersville, WV. This contract is estimated to last approximately 1 year or more, with the potential of extension to permanent full-time employment. Client facility is a chemical plant and will require the Project Manager to manage multiple capital projects at a time. Candidates for this position should have large-scale plant and industrial chemical experience. This is an ON-SITE position and remote candidates cannot be considered.

The Project Manager is responsible for managing all activities for Professional Engineering projects in accordance with the project schedule and budget. This includes directing and coordinating an engineering design team and/or subcontractor activities in accordance with project/client procedures, scope of work, project cost control, client/vendor/contractor interface, and contract specifications. The Project Manager will serve as the primary point of contact with the client for all project-related activities and communication. This individual is expected to fulfill the requirements of the position and understands that the design process includes visiting clients’ facilities where they may be expected to perform physical work.

Qualifications:

To perform this job successfully, you must be able to accomplish each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Upon request, reasonable accommodations may be made to enable individuals with disabilities to perform these essential functions.

Education/Experience/Key Responsibilities:

• BS degree in and Engineering discipline; Chemical preferred. Other degrees may be considered based on past project experiences.
• Ten (10) years minimum project management or project engineering experience in Chemical or Petrochemical industries, including scope, budget, schedule and construction oversight.
• Provide project management of multi-disciplined engineering projects and maintain responsibility for overall execution of work.
• Establish project schedule and budget and execute and monitor progress in meeting schedule, budget and contractual requirements.
• Anticipate project staffing needs and provide input to selection of project team members.
• Establish objectives and provide performance feedback for project team members.
• Work collaboratively and build effective relationships with others.
• Communicate effectively across all levels within the organization.
• Maintain a positive attitude.
• Manage multiple projects.
• Travel as required for field work and/or other client/business objectives.
• Work with clients to develop scope, resolve conflicts, and build relationships.
• Actively promote, support, and monitor Chemstress’ safety policies and the safety policies of our clients.
• Document and execute changes in scope of project.
• Anticipate problems and work with the client, engineering, OEM's, subcontractors, and project team to provide corrective actions.
• Act as technical resource for team and actively coach junior engineers and designers.
• Create concepts and provide options to solve complex process problems.
• Coordinate feasibility level scope and cost estimates as well as detailed design and project execution.
• Prepare and deliver technical presentations to clients regarding project related items.
• Ensure that Chemstress and the clients QC procedures are followed.
• Lead data gathering, design reviews, installs, checkout/startups and troubleshooting. efforts associated with project work.
• Proficient in MS Project, Word, Excel and able to review drawings using various CAD packages.
• Experience with managing contractors and vendors.
• Experience with managing capital engineering service projects.

Eligibility Requirements:

• Must be legally authorized to work in the United States without restriction
• Authorizes a background investigation, including verification of past employment, criminal history, and educational background
• Submits to a drug test post offer
• Possesses a valid driver’s license
• Accepts that this position may require some domestic overnight travel
• Willingness to commute to office location at least 3 days per week
• Ability to collaborate with others in an on-site, team environment
• Demonstrate reliable, consistent, and punctual work-site attendance
• Ability to utilize the required technology such as computers, phones, and tablets to complete job duties
• Must be an organized, self-starter who can independently manage time effectively
• Have the ability to handle varying workloads and the variable stress-levels associated with said workload
• Ability to meet the quality and productivity standards required by the company

Location: On-site in Sistersville, WV

Job type: Long-term contract (1 year+)

Pay: $60 - $72/hr

Chemstress Consultant Company is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. Chemstress does not discriminate in employment opportunities or practices on the basis of age, color, disability, gender identity, national origin, race, religion, sex, sexual orientation, veteran status, or any other characteristic protected by country, regional or local law.

Keywords: industrial, chemical, engineer, engineering, project management, project manager, PM, PMO, consulting, full time, contract, EPC, EPCM, stage gate process, FEL

Vice President – Engineering & Manufacturing

| Executive Leadership | High-Impact Role

I’m currently partnering with a well-established aerospace manufacturing organization that is looking to bring on a Vice President of Engineering & Manufacturing to lead both product development and production operations.

This is a key executive leadership role responsible for driving the design, manufacturing, and delivery of highly engineered aerospace systems used on global aircraft platforms. The role oversees engineering, production, materials planning, and supply chain while working closely with program management, operations, and executive leadership.

If you enjoy building high-performing teams, improving manufacturing performance, and delivering complex aerospace programs, this could be a great opportunity.

What You’ll Be Responsible For

• Leading aerospace programs from design through production and delivery

• Overseeing engineering, manufacturing, supply chain, and materials planning

• Driving operational efficiency, cost control, and production scalability

• Partnering with program management and commercial teams to support program execution and accurate cost estimates

• Implementing continuous improvement initiatives across engineering and manufacturing operations

• Ensuring compliance with aerospace quality standards and regulatory requirements

• Developing and mentoring leadership across engineering and production teams

What They’re Looking For

• 15+ years of experience in aerospace or complex manufacturing environments

• 10+ years leading engineering or production teams

• Strong experience supporting aerospace hardware programs from development through production

• Background in AS9100 or other regulated manufacturing environments

• Experience driving Lean manufacturing / operational improvement initiatives

• Bachelor’s degree in engineering, manufacturing, or related field

• Ability to obtain U.S. security clearance is preferred

Why This Role Stands Out

• Executive leadership position with major influence on company strategy and operations

• Opportunity to lead both engineering innovation and manufacturing execution

• Highly visible role working directly with executive leadership and customers

• Strong growth potential as the company continues to expand

About GE Aerospace

If you want to do work that really matters among a team of spirited and collaborative individuals, you need to know more about GE Aerospace. We've become a world leader in the design, development and manufacture of advanced aviation technologies including jet engines, components, and integrated systems for commercial and military aircraft. We're a people-first organization that will bring out your best ideas and performance as part of our on-going LEAN transformation. We believe that the world works better when it flies. Do you? If so, come aboard.

Working at our Lynn Facility

Come and elevate your career in a facility that combines a rich tradition of aviation technology with a deep commitment to the future of flight. The GE Aerospace manufacturing site in Lynn designs, produces, assembles, and tests military and commercial aircraft engines and components. With more 2,500 employees and 1.6 million sqft of manufacturing space, we're making a huge contribution to the future of flight. And, considering that very first jet engines were born here in 1942, we clearly are the career home of people who are deeply knowledgeable about building quality engines. What's more, GE Aerospace has invested more than $100 million in our facility in the last five years alone.

By engaging with highly collaborative teams, we're reaching for new Sustainable Aviation Fuel milestones every year. And by encouraging our teams to join us in extensive community service and volunteerism, we're making a difference in all the ways that matter.

Here are just a few of the best reasons you will want to consider us:

• Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably.
• Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected.
• Earn merit-based rewards and incentives.
• Free Onsite Parking.
• Set work schedule with no mandatory overtime.
• Work in a climate-controlled building out of the elements.
• Have opportunities for continuous learning and development.

Job Overview:

This is a challenging opportunity that involves complete assembly, disassembly, test set up, adjustment, and inspection of aircraft engines and major components in accordance with assembly, test or engineering instructions, specifications, and drawings. You'll do set-up and operate a variety of standard and specialized tools and a variety of balance machines to perform all types of balancing operations.

The Ideal Candidate:

We are looking for a team player who is looking to help continue our vision of seeing not only our engines take flight, but their careers as well. Utilizing your training or military experience in the field to provide detail-oriented support on aircraft engine assembly and test functions.

Requirements include:

• High School diploma or equivalent.
• FAA Power Plant License; OR 2 years minimum experience aircraft power plant maintenance experience with another company; OR 2 years minimum experience as an aircraft aviation mechanic or equivalent in a branch of the military.
• Relocation assistance available!

Preferred qualifications:

• Strong interpersonal and communication skills.
• Proficient in the use of basic hand and power tools.
• Experience in the use of precision measuring instruments.
• Experience with computers, applications, and keyboarding.

Additional Information:

• If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at .
• Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable).
• You must have the ability to lift, move, and manipulate fixtures and component hardware up to 45 lbs. with or without reasonable accommodations.

Whether we are manufacturing components for our engines, driving innovation in fuel and noise reduction, or unlocking new opportunities to grow and deliver more productivity, our GE Aerospace teams are dedicated and making a global impact. Join us and help move the aerospace industry forward.

The pay for this position is $32/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 12/31/2026.

GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness.

GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or programs (i.e., is a \"Sponsor\"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual.

This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)).

GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunities Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Relocation assistance provided: Yes.

Engineering Project Coordinator

Are you a highly organized individual with a passion for engineering projects? Our company is seeking a dedicated Engineering Project Coordinator to join our team. As a crucial link between engineering, sales and marketing teams, you will play a pivotal role in facilitating the smooth execution of engineering projects from inception to completion. This role offers a unique opportunity to leverage your organizational skills and engineering knowledge to ensure projects stay on track, deadlines are met, and objectives are achieved. If you thrive in a fast-paced environment and enjoy working collaboratively to drive project success, we encourage you to apply and become an integral part of our dynamic team.

About the Company

Connection Technology Center (CTC) is the global leader in the design & manufacture of cutting-edge vibration analysis hardware for machine condition monitoring. As a family-owned & operated business for 30 years, we are proud to play a crucial role in preventing operational disruptions, financial losses, and safety concerns for heavy industry. From small scale manufacturing to Fortune 500 companies in Paper & Pulp, Auto & Steel, Food & Beverage, Pharmaceutical, Mining and many more, our mission is to create products that help ensure seamless operational uptime and contribute to a safer, more efficient manufacturing future.

Main Responsibilities

Project Planning and Scheduling:

o  Assist in the development of project plans, timelines, and schedules.

o  Coordinate with project managers and team members to ensure alignment with project objectives and deadlines.

Resource Management:

o  Allocate resources, including personnel, equipment, and materials, to support project activities.

o  Monitor resource utilization and identify any potential bottlenecks or constraints.

Documentation and Reporting:

o  Maintain accurate project documentation, including project plans, meeting minutes, and progress reports.

o  Prepare regular status updates and reports for project stakeholders.

Communication and Coordination:

o  Serve as a central point of contact for project-related inquiries and communications.

o  Facilitate communication between project team members, clients, vendors, and other stakeholders.

Quality Assurance:

o  Ensure adherence to project quality standards and requirements.

o  Conduct quality reviews and inspections to verify compliance with project specifications.

Change Management:

o  Manage change requests and modifications to project scope, schedule, or resources.

o  Assess the impact of proposed changes and communicate updates to relevant stakeholders.

Requirements

o  Bachelor’s degree in Engineering, Project management, or related field.

o  Proven experience in project coordination or management within the engineering industry.

Knowledge, Skills, and Abilities

o  Excellent organizational and time management skills.

o  Strong attention to detail and accuracy.

o  Proficiency in project management software.

o  Effective communication and interpersonal skills.

o  Ability to adapt to changing priorities and work in a fast-paced environment.

o  Must be able to work individually as well as in a small team environment.

Work Location

This in-person position will work out of the Victor, NY facility.

Salary Range: $55,000 - $65,000

Benefits

• Health Insurance
• Dental Insurance
• Vacation Time
• Sick Leave
• 401K plan with Employer Match
• Summer golf membership to Bristol Harbour Private Golf Course 

How to Apply

Please apply here: Technology Center (CTC) is an equal-opportunity employer. NYS law prohibits discrimination because of age, race, creed, color, national origin, sexual orientation, military status, sex, disability, predisposing genetic characteristics, marital status, domestic violence victim status, carrier status, gender identity, prior conviction records, prior arrests, youthful offender adjudications or sealed records unless based upon bona fide occupational qualification or other exception, or any other protected characteristic as outlined by federal, state, or local laws.

Location: Hybrid: Los Angeles, Remote: Pacific Time Zone

Department: Game Design

Employment Type: Full-time

About the Role:

Refactor Games is a AAA sports video game studio. We are developing the next generation of professional football (soccer) video games using Unreal Engine 5.

We are seeking a highly skilled Technical Game Designer to design, implement, and iterate core game systems that define how our AAA European football video game feels, behaves, and engages players — across gameplay, modes, progression, and meta structures. You’ll work hands-on within Unreal Engine (Blueprints and scripting) to prototype, tune, and ship systems while bridging the gap between creative design vision and engineering execution.

In this role, you’ll collaborate closely with designers, engineers, animators, UX, and production to ensure our football systems, from player mechanics to match-level logic, are robust, reusable, well-documented, and optimized for performance.

** All applications must include a Cover Letter. Please detail your past experience with Sports Game development and relevant soccer experience/fandom, if applicable. **

Experience:

• 3+ years of professional game design or technical design experience.
• Including work on at least one shipped title (AAA or high-quality).

What You'll Work On:

• Implement gameplay systems using Unreal Engine Blueprints and gameplay scripting, ensuring fidelity, performance, and scalability across content.
• Prototype new systems and features rapidly in editor and iterate based on feedback from design reviews and playtests.
• Collaborate with engineering to define architecture, data flow, and scripting standards for game systems.
• Tune system behavior for balance, player experience, and performance, using telemetry and designer instinct.
• Work with multidisciplinary teams (AI, animation, UX, economy, live ops) to ensure game systems integrate cleanly across features.
• Write clear documentation including design specs, variable definitions, use cases, and technical expectations.
• Debug gameplay logic and support QA in identifying issues, performance bottlenecks, and systemic edge cases.
• Support ongoing game content updates, seasonal content pipelines, and live tuning processes.

Requirements:

• Hands-on experience with Unreal Engine 5 workflows, including Blueprints and gameplay scripting.
• Strong understanding of gameplay systems design, including mechanics, progression logic, and modular systems.
• Ability to implement, test, and optimize systems in engine with iterative prototyping.
• Ability to work collaboratively with programmers and other designers to deliver system features.
• Solid documentation and communication skills, articulating design intent and technical constraints.
• Passion for football (soccer) games and understanding of how systems support player engagement.

Bonus Points:

• Experience working on sports titles or competitive multiplayer games.
• Familiarity with networked gameplay replication, gameplay abilities, and data-driven systems.
• Experience with Unreal Engine C++ integration, data asset workflows, and gameplay scripting conventions.
• Ability to leverage player data and analytics to refine systems over time.
• Experience designing systems for live content cadence, progression balance, and seasonal features.

What We Offer:

• Opportunity to influence core systems in a major AAA football game and work on cutting-edge features.
• Cross-discipline collaboration with designers, engineers, and live operations teams.
• Competitive compensation, and benefits.
• Career growth opportunities into Senior or Lead Technical Design positions.

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About the School of Computational Science and Engineering at the Georgia Institute of Technology

Georgia Tech is organized into six Colleges. The School of Computational Science and Engineering resides in the College of Computing along with the School of Computer Science, the School of Interactive Computing, the School of Cybersecurity and Privacy, and the School of Computing Instruction. Joint appointments with other Schools in the College of Computing as well as Schools in other Colleges are possible.

Atlanta, GA

The School of Computational Science and Engineering (CSE) () at the Georgia Institute of Technology in Atlanta, GA, U.S.A. invites applications for multiple openings for the position of Assistant Professor (tenure-track); openings for Associate Professor and Professor (tenured or tenure-track) are also available. All positions are full-time and are located in Atlanta, GA, U.S.A. The School of CSE focuses on foundational research of an interdisciplinary nature that enables advances in science, engineering, medical, and social domains. Candidates are expected to demonstrate an exceptional commitment to the teaching and mentoring of students.

Duties of these positions include developing and sustaining a research program in one or more of our core areas (research) high-performance computing, data science and visual analytics, scientific computing and simulation, artificial intelligence and machine learning, and computational bioscience and biomedicine.

We also welcome candidates in the area of AI and finance, with the opportunity to be considered for the JPMorgan Chase Endowed Career Development Professorship.

Duties also include teaching undergraduate and graduate courses (classroom teaching), as well as providing service to the School, College and the Institute.

An earned PhD degree is required by the start date of the job, in a discipline relevant to the field of Computational Science and Engineering, including a degree in Computer Science, Mathematics, Engineering, or Science.

Applicants are expected to engage in substantive research with collaborators in other disciplines. For example, current faculty have domain expertise and/or collaborations in computational chemistry; earth sciences; biomedical and health sciences; urban systems and smart cities; social good and sustainable development; materials and manufacturing; and others.

Applicants are also expected to meet student success criteria, such as the ability to promote a welcoming educational/work environment.

Applications must be submitted online as .PDF files through the University System of Georgia CAREERS website. Do not upload reference letters at the University System of Georgia CAREERS website. Instead, create an application (with all application materials) at Academic Jobs Online ajo/jobs/31161 and have your letter writers submit your reference letters at AJO. We apologize for the inconvenience of uploading your documents to two sites.

For full consideration, applications are due by December 31, 2025.

Submit the following items online at this website to complete your application:

- Cover letter
- Curriculum Vitae
- Research statement
- Teaching statement
- A sample publication (the most significant contribution)
- Names of 2-3 Georgia Tech CSE faculty members closest to your research (see people/faculty for current faculty)
- Three or more reference letters (to be submitted online by the reference writers at this AJO site)

Further Info:
.

Questions can be sent to Georgia Tech CSE Faculty Recruiting: .

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The Institute is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and Institute policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Equal opportunity and decisions based on merit are fundamental values of the University System of Georgia ("USG") and Georgia Tech. Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of an individual's race, ethnicity, ancestry, color, religion, sex (including pregnancy), national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel
This position does not require security clearance.

The candidate of choice will be required to pass a pre-employment background screening: employment/pre-employment-screening.

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About the School of Computational Science and Engineering at the Georgia Institute of Technology

Georgia Tech is organized into six Colleges. The School of Computational Science and Engineering resides in the College of Computing along with the School of Computer Science, the School of Interactive Computing, the School of Cybersecurity and Privacy, and the School of Computing Instruction. Joint appointments with other Schools in the College of Computing as well as Schools in other Colleges are possible.

Atlanta, GA

The School of Computational Science and Engineering (CSE) () at the Georgia Institute of Technology in Atlanta, GA, U.S.A. invites applications for multiple openings for the position of Assistant Professor (tenure-track); openings for Associate Professor and Professor (tenured or tenure-track) are also available. All positions are full-time and are located in Atlanta, GA, U.S.A. The School of CSE focuses on foundational research of an interdisciplinary nature that enables advances in science, engineering, medical, and social domains. Candidates are expected to demonstrate an exceptional commitment to the teaching and mentoring of students.

Duties of these positions include developing and sustaining a research program in one or more of our core areas (research) high-performance computing, data science and visual analytics, scientific computing and simulation, artificial intelligence and machine learning, and computational bioscience and biomedicine. Duties also include teaching undergraduate and graduate courses (classroom teaching), as well as providing service to the School, College and the Institute.

An earned PhD degree is required by the start date of the job, in a discipline relevant to the field of Computational Science and Engineering, including a degree in Computer Science, Mathematics, Engineering, or Science.

Applicants are expected to engage in substantive research with collaborators in other disciplines. For example, current faculty have domain expertise and/or collaborations in computational chemistry; earth sciences; biomedical and health sciences; urban systems and smart cities; social good and sustainable development; materials and manufacturing; and others.

Applicants are also expected to meet student success criteria, such as the ability to promote a welcoming educational/work environment.

Applications must be submitted online as .PDF files through the University System of Georgia CAREERS website. Do not upload reference letters at the University System of Georgia CAREERS website. Instead, create an application (with all application materials) at Academic Jobs Online ajo/jobs/29037 and have your letter writers submit your reference letters at AJO. We apologize for the inconvenience of uploading your documents to two sites.

For full consideration, applications are due by December 1, 2024.

Submit the following items online at this website to complete your application:

• Cover letter
• Curriculum Vitae
• Research statement
• Teaching statement
• A sample publication (the most significant contribution)
• Names of 2-3 Georgia Tech CSE faculty members closest to your research (see people/faculty for current faculty)
• Three or more reference letters (to be submitted online by the reference writers at this AJO site)

Further Info:

Questions can be sent to Georgia Tech CSE Faculty Recruiting

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening.

Crown Equipment Corporation is one of the world’s largest material handling companies, with a reputation for award-winning product design, advanced engineering and technology, and superior after-sale service. Crown produces and sells a broad range of forklifts, batteries, chargers, automation and fleet management technologies that are revolutionizing the material-handling industry.

Job Responsibilities:

Lead the development, implementation, and performance of CAE, Simulation, FEA, Stability, and Structural Analysis tools that support validation of new and existing vehicles, systems, and components. Manage a team of engineers, guide technical decision‑making, and contribute directly to engineering solutions when needed. Reports to the Director or Senior Manager of Component Development.

• Product and Technology Champion - Lead development of new products and structural systems, approving technical solutions and driving innovation. Identify emerging technologies and competitive trends; recommend product, process, and tool improvements. Support Current Product Engineering, Service, Sales, Manufacturing, Purchasing, Quality, and Product Safety on issues related to masts, attachments, durability, and stability. Conduct product reviews to ensure competitive, innovative designs move to production.
• Project Planning, Supervision and Technical Review - Ensure engineering work meets product goals, industry standards, and sound engineering practices. Review and approve test results and production releases. Support budgeting, resource planning, and personnel decisions (hiring/termination).
• Employee Development - Perform duties such as creating/revising job descriptions, conducting Talent Development discussion sessions, rating performance, establishing/tracking goals and assisting in the completion of annual wage reviews. Responsible for coaching, motivating, mentoring, and developing direct reports to successfully take on additional responsibilities.
• Leadership and Communication - Ensure teams meet product, cost, and schedule targets. Collaborate with department leaders to resolve design direction, priorities, and resource needs. Communicate project and departmental updates to management via written and oral presentations. Perform other duties as assigned.

Minimum Qualifications:

• Bachelor degree in Mechanical Engineering, Aerospace Engineering, or related
• 16 years of product development experience, including mechanical design experience, project management, and supervision
• Skilled in finite element analysis (FEA), computer aided design (CAD), 3-D modeling, and simulation software; preferably Nastran, FEMAP, Simcenter, and NX CAD
• Good written, verbal, analytical, and interpersonal skills
• Ability to travel occasionally with overnight stays (0-5%)
• Valid driver license and reliable transportation to travel locally between company locations during scheduled workday
• Ability to learn operation of lift trucks
• Per 8-hour shift. Sit 8 hours and stand 0 hours. Both typical and non-typical office environment (low to moderate noise level, low exposure to hot/cold temperatures, dust, fumes, and vibrations). Regular interaction with others and performs a degree of independent work. Physical and mental demands are akin to the majority of office positions with prolonged periods of sitting and prolonged use of a computer/keyboard. Infrequent lifting, walking, and climbing stairs. Occasional use of office equipment (copiers, printers, etc.).

Preferred Qualifications:

• Working knowledge of the product series in lift truck design, industrial design and ergonomics

Work Authorization:

Indefinite U.S. work authorized individuals only. Individuals with temporary visas are ineligible. Sponsorship for work authorization, now or in the future, is unavailable.

No agency calls please.

Compensation and Benefits:

Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.

EOE Veterans/Disabilities

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is seeking an F-15 Mission Systems Integration Engineering Manager for Fighters Mission Systems in Berkeley, MO.

The F-15 Integration Team is responsible for development and maturation of integrated mission capabilities of the F-15. This team develops system and subsystem level requirements and is the primary customer and program interface for overall capability development. In addition, they ensure technical alignment across the entire Mission Systems function throughout the capability development lifecycle.

You will have the opportunity to interact with multiple engineering functions, program management, and a variety of domestic and international customers. You will be leading a team of technical leaders that have a diverse set of experiences and skillsets.

A successful candidate will have a proven track record of developing and empowering strong technical leaders. Since you will be working with a large set of cross-functional engineers, strong interpersonal and communication skills are a must.

Position Responsibilities:

• Coach and mentor employees to ensure role clarity

• Develop and maintain team processes for capability development

• Develop and maintain resource pipeline for critical role development

• Balance team allocation across all F-15 Domestic and International programs

• Interface with internal and external stakeholders to ensure program commitments are met

• Manage team financial performance for all assigned programs

• Provide accurate estimates for future business requests

• Develop and maintain quality metrics

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

• A final Secret Clearance Pre-Start is required.

Basic Qualifications (Required Skills/Experience):

• Bachelor of Science degree in Engineering (with a focus in Electrical, Mechanical or Aeronautical), Computer Science, Data Science, Mathematics, Physics, Chemistry

Preferred Qualifications (Desired Skills/Experience):

• 9+ years of work-related experience with a bachelor’s or 7+ years of work-related experience with Masters or 4+ years with a PhD

• 3+ years of experience with Mission Systems

• 3+ years of experience in leading engineering teams

• 1+ years of experience with Cost Account Management, Earned Value Management

• Experience working with cross-functional teams

• Experience briefing senior leadership or customers

• Experience with Agile development

• Experience with DOORS

Conflict of Interest:

Successful candidates for this job must satisfy Company’s Conflict of Interest (COI) assessment process.

Typical Education/Experience:

Education/experience typically acquired through advanced technical education from an accredited course of study in engineering, computer science, engineering data science, mathematics, physics or chemistry (e.g. Bachelor) and typically 9 or more years' related work experience or an equivalent combination of technical education and experience or non-US equivalent qualifications. In the USA, ABET accreditation is the preferred, although not required, accreditation standard.

Relocation:

This position offers relocation based on candidate eligibility.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Shift:

This position is for 1st shift.

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

Boeing offers a comprehensive benefits package including generous Paid Time Off (PTO), flexible work environment, paid parental leave, 401k matching, extremely generous tuition assistance for earning advanced degrees, and paid medical leave programs.

Boeing 401(k) helps you save for your future, with contributions from Boeing that can help you grow your retirement savings. Our best-in-class retirement benefit features:

• Best in class 401(k) plan: we'll match your contributions dollar for dollar, up to 10% of eligible pay with Immediate 100% vesting

• Student Loan Match: The Boeing 401(k) Student Loan Match allows eligible enrolled U.S. employees to have their qualified student loan debt payments counted, along with any match-eligible contributions they make, for purposes of determining the Company Match to employees' Boeing 401(k) accounts.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Please note that the salary information shown below is a general guideline only. Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range:

Level K Manager: $141,100 - $190,900

Applications for this position will be accepted until Mar. 22, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Michelin Louisville is seeking Engineering Co-Op students majoring in Chemical, Mechanical, Industrial, Computer, and Electrical Engineering to join the team at our plant in Louisville, KY.

In our petrochemical facility we produce synthetic rubber from monomer feedstocks and catalysts, through a polymerization reaction.

The product, after other operations, is carefully weighed and pressed into uniform bales before shipping to the next Michelin factory for tire production.

Our facility supplies various rubber products that go into tires in the USA, Canada, and in Michelin factories around the world. Our site is one of the three Michelin petrochemical sites producing synthetic rubber for cars, vans, trucks, two-wheelers, aircraft, agricultural tractors, and mining equipment.

WHAT WILL YOU DO

Support the Energy and Water Saving (EWS) Project. This role will contribute to sustainability initiatives by assisting in data analysis, project coordination, and technical research aimed at improving energy and water efficiency across operations.

• Gain hands-on experience in sustainability and resource efficiency projects.

• Exposure to industrial systems and operational improvement strategies.

• Mentorship from experienced professionals in engineering and project management.

Data Collection & Analysis

• Collect and analyze energy and water usage data from various systems and facilities.

• Identify inefficiencies and opportunities for conservation.

• Assist in developing visual reports and dashboards to communicate findings.

Project Coordination

• Support the implementation of energy and water saving initiatives, including audits and retrofits.

• Coordinate with internal teams and external vendors to ensure timely execution of project tasks.

• Track project milestones and prepare regular status updates.

Technical Research

• Conduct research on emerging technologies and best practices in energy and water conservation.

• Benchmark current performance against industry standards and provide recommendations.

Documentation & Reporting

• Maintain organized records of project activities, findings, and recommendations.

• Prepare technical documentation, presentations, and reports for stakeholders.

Stakeholder Engagement

• Assist in preparing communication materials for awareness campaigns and training sessions.

• Support efforts to promote engagement in sustainability initiatives.

WHAT WILL YOU BRING

The ability to interact in a professional manner with external partners, suppliers, customers, and colleagues. Success in working with other people or team to meet a common objective. Proficient in the use of Microsoft Office Suite (Word, Excel, PowerPoint) and ability to learn other software systems. Minimum cumulative GPA of 3.0 Currently enrolled in a Mechanical, Chemical, Industrial, Computer, or Electrical Engineering or equivalent program at an accredited four-year college or university.

• Strong analytical and problem-solving skills.

• Proficiency in Microsoft Excel, Power BI, or similar data analysis tools.

• Effective written and verbal communication skills.

• Familiarity with energy management systems or water conservation technologies is an asset.

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!