Crane Monsters Corp Jobs in Usa

Crane Monsters is one of the Best Used Crane dealers in the U.S, we’re based out of the Houston, we buy, sell and repair mobile cranes.

We’re looking to add another experienced Crane Technician/Mechanic to our team.

As an Experienced Crane Tech - you Will be responsible for the inspection, diagnosis, repair and maintenance of various mobile cranes.

Job Responsabilities:

Operate and inspect cranes in order to diagnose defects

Demonstrate working knowledge of CANBUS, LMI Systems, Hydraulic Systems, Electrical Systems.

Examine parts for damage or excessive wear

Read, understand and interpret maintenance manuals, operating manuals, parts manuals and technical drawings

Test mechanical, electrical, pneumatic and hydraulic products and equipment after repair or modification to ensure proper operation

Accomplish tasks independently without direct supervision

Perform thorough inspections

Operate cranes as needed

Maintain conformity to safety requirements and other regulations

Properly fills out working reports, hour's reports, time sheets, hour's overviews and expense reports

Good customer service and communication skills

Set a positive example in punctuality and professional demeanor by respectful communication with all levels of staff, keeping work areas/Field Service Trucks clean & orderly

Promote safety regulations and all other company programs and policies

Willingness to travel by land and air

Ability to work overtime as well as on weekends

A minimum of 3 years of relevant driving

experience

Qualifications:

A minimum 5 years of experience as a Mobile Crane Mechanic/Technician, specifically RTs, All Terrains and Truck Cranes.

Valid driver's license and satisfactory driving record

Ability to lift up to 40lbs

Basic computer skills

Manufacture approved training/certifications required

Benefits:

PTO, Paid Vacation Days, Health, Vision, Dental and Life Insurance, company match Retirement Plan (Waiting period may apply)

Full Time Opportunity:

Yes

Typical start time:

7AM

Typical end time:

4PM

Work Remotely

No

Company Description

The United States Marine Corps is a branch of the United States Armed Forces tasked with delivering rapid, combined-arms task forces on land, at sea, and in the air. Operating under the Department of War (DoW), the Marine Corps provides power projection through its mobility and collaboration with the U.S. Navy. Known for its legacy of excellence and discipline, the Marine Corps plays a critical role in the security and defense of the nation. The organization offers a dynamic and mission-focused environment for individuals seeking impactful and meaningful careers.

Role Description

This is a full-time, on-site role for a Prosecutor or 0-3L Law Student opportunity with the United States Marine Corps, based in Seattle, WA. Responsibilities include prosecuting cases, advising on legal matters, interpreting and applying criminal law, and supporting the legal justice system. The role involves extensive collaboration with legal professionals to ensure compliance with legal standards in diverse and challenging scenarios.

Featured Benefits

• Salary: $110k/yr - $144k/yr
• Up to $50,850 of tuition assistance benefits for current students
• Licensing Fee Reimbursement for accepted student applicants
• 401(k) equivalent and Pension plan
• 12 weeks of paid paternity and maternity leave
• Federal Medical, Vision, and Dental Insurance
• Student Loan Forgiveness after 10 years

Qualifications

• Juris Doctorate (JD) or current enrollment in a law program (0-3L students are qualified)
• LSAT score of 150+
• Understanding of Law, Criminal Law, and Criminal Justice principles
• Experience in providing Legal Advice in complex situations
• Familiarity with Accounting practices as they relate to legal and financial cases
• Strong analytical, communication, and problem-solving skills
• Commitment to ethical and impartial service
• Ability to work in high-pressure environments and make sound decisions

Position Purpose:

The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards.

Key Responsibilities:

Safely deliver building materials within a 200-mile radius, following DOT regulations and company policies.
Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries.
Verify inventory, document deliveries with photos, and assess job sites for safety risks.
Provide excellent on-site customer service and support warehouse and yard maintenance.

Direct Manager Direct Reports:

Reports directly to the Assistant Branch Manger or Operations Manager.

Travel Requirements:

This role requires frequent travel within a 200-mile radius for material deliveries, with all trips starting and ending at the home branchensuring drivers return home daily with no overnight stays.

Physical Requirements:

This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varying weather.
Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels.
Routine tasks include driving, material handling, and adhering to all safety regulations.
Reasonable accommodations are available per ADA, and the company is committed to equal opportunity and an inclusive workplace.

Working Conditions:

This fast-paced, field-based role focuses on safe, precise, and on-time delivery of building materials within a 200-mile radius. Drivers return home daily with no overnight stays. Success requires strong organization, communication, and customer interaction to meet delivery deadlines and ensure satisfaction at varied job sites.

Minimum Qualifications:

Valid CDL drivers license
1-2 years of relevant work experience
Crane operator certification
Proficiency in performing routine maintenance and safety checks
Knowledge of basic mechanical systems
Licensing & Certification:
Valid Class A or B CDL with air brakes endorsement
Current DOT medical certificate
FMCSA Clearinghouse registration
Technical Proficiencies:
Experience operating conveyor belts, knuckle booms, or crane-equipped trucks
Forklift operation experience; certification preferred
Knowledge of DOT regulations and OSHA safety standards
Experience:
Commercial driving experience preferred
Background in distribution environments beneficial
Experience with material handling and delivery logistics is a plus
Skills:
Ability to lift and move up to 100 lbs. repeatedly
Proficient in English (reading, writing, and verbal communication)
Skilled in pre- and post-trip vehicle inspections
Capable of conducting job site inspections and reporting conditions
Safety & Compliance
Strong adherence to safety protocols
Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months)
Must pass background check and drug screening
Other Requirements:
Minimum age: 18 (21 if crossing state lines or transporting hazardous materials)
Must be legally authorized to work in the U.S. and pass E-Verify
Physical Requirements
Lift/move up to 100 lbs.
Work in various weather and noisy environments
Climb ladders and work at heights

Preferred Qualifications:

Qualifications & Experience
35 years of truck driving experience
Professional crane operation experience
Strong time and route management skills
Equipment Proficiency
Skilled in operating boom cranes, piggyback forklifts, and conveyor systems
Forklift certification preferred
Safety & Compliance
Deep knowledge of DOT and OSHA regulations
Proven commitment to safety standards and practices
Customer Service
Effective on-site communication and collaboration
Skilled in strategic material placement to meet customer needs
Problem Solving & Logistics
Quick resolution of delivery challenges
Efficient route planning to optimize time and fuel
Teamwork
Working collaboratively with teams
Inventory & Technology
Proficient in digital inventory management and order verification
Committed to continuous learning and skill enhancement

Minimum Education:

High school diploma or equivalent.

Preferred Education:

Vocational or technical training in heavy machinery operation.

Minimum Years Of Work Experience:

12 years of experience preferred. While not strictly required, prior commercial driving experience is strongly recommended. Experience in distribution and forklift operation is a plus.

Certifications:

Commercial Drivers License (CDL):
Valid Class A or Class B CDL with air brakes endorsement.
NCCCO Crane Certification:
Specifically, ABC/ABL certification is required.
Truck Crane Operation Certification:
Preferred but not mandatory.
Telescopic Boom - Fixed Cab Certification:
Preferred but not mandatory.
Boom Truck - Fixed Cab Certification:
Preferred but not mandatory.
Articulating Boom Crane Certification:
Preferred but not mandatory.

Competencies:

Leadership & Collaboration
Able to lead and manage teams effectively
Adaptable to changing situations
Works well in team environments
Encourages innovation and communicates clearly
Customer-focused and results-driven
Skilled in conflict resolution
Safety & Compliance
Strict adherence to DOT and OSHA regulations
Maintains a strong safety record and promotes safe practices
Technical Skills
Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems
Accurate in inventory checks and site inspections
Communication & Customer Service
Clear, courteous communication with customers and team members
Focused on customer satisfaction and precise material placement
Problem Solving
Resolves delivery and site issues quickly and effectively
Physical & Environmental Readiness
Capable of lifting up to 100 lbs and working in varied conditions
Organization & Logistics
Efficient in planning routes and managing deliveries
Supports branch operations through task prioritization

Job Location:

• 
  
• Competitive salaries for all team members paid weekly
  
• 401(k) Retirement Plan with company matching
  
• Employee Stock Purchase Program
  
• Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
  
• Paid Parental Leave, Adoption Assistance Program
  
• Medical, Dental and Vision Benefits
  
• Flexible and Dependent Care Spending Accounts
  
• Company paid Life insurance and Short-Term Disability
  
• Additional Life Insurance and Long-Term Disability also offered
  
• Mental, Physical and Emotional Well-Being Programs for Employees and Families
  
• Wellness Program and Safety Program with Bonuses for our Drivers
  
• Employee Referral Bonus Program
  

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for a Crane Maintenance Mechanic, to join our team in Seattle, SeaTac, Renton, Tukwila, Kent, Auburn and Puyallup, Washington.

As a crane maintenance mechanic, you will ensure the safety and efficient operation of our cranes, essential equipment for our manufacturing processes.

You will play a critical role in upholding our commitment to safety and quality standards and ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and join our mission to deliver excellence in aviation.

Position Responsibilities

• Inspect, maintain, repair, rebuild, retrofit, modify, assemble, disassemble, troubleshoot, analyze, diagnose, calibrate, adjust, and test mechanical systems and or subsystems of all types of cranes such as, but not limited to cab operated, radio controlled, jib type, pendant operated, etc. Know, understand, and work in compliance with SHEA and other applicable codes and regulations for overhead cranes

• Coordinate and work with management, engineering, equipment vendors, and other organizations to analyze equipment design requirements and capabilities.
• Use schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances.

• Determine and/or develop methods where procedures may not be available.
• Devise and make shop aids to facilitate work. Operate and utilize mechanical, test equipment and test systems, precision devices in failure analysis, all forms of predictive/preventative technologies, as required on cranes.
• Operate, use and maintain overhead maintenance work platforms
• Maintain, adjust, install and repair, hydraulic, pneumatic and electric brake system components on cranes and bridges as requires.
• Inspect and maintain building runway rails and expansion joints.
• Maintain mechanical crane and hoist systems including cables, chain, sheaves and hooks.
• Perform the operational tests and load tests of cranes and bridges as required by Engineering, SHEA and other applicable codes and regulations.
• Maintain logs, charts, and perform written and verbal tie-in records.
• Prepare reports and schedules as required.
• Work with and assist employees of other classifications as required.
• Perform work in other classifications when incidental but necessary to the accomplishment of the assignment.

Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.
• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.
• Work in environments that may involve contact with metals, solvents, and coolants.
• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.
• Adapt to varying noise levels and atmospheric conditions.
• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a "US Person" as defined by 22 C.F.R. § 120.15 is required. "US Person" includes US Citizen, lawful permanent resident, refugee, or asylee

Resumes of current Puget Sound Boeing employees submitted via "Find Jobs" in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program).

Basic Qualifications

• 2+ Years experience using schematics, blueprints, sketches, manuals, technical documents, written information, verbal information, applicable procedures, codes and ordinances

• 2+Years experience maintaining mechanical cranes and hoists systems including cables, chain sheaves and hooks.

• This position requires an individual when working at heights to utilize fall protection equipment that has weight limitations.
• Able to lift up to 35 pounds.

Preferred Qualifications:

• Experience inspecting and maintaining building runway rails and expansion joints.
• Preference given to those with 2 years overhead crane experience.

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:

• This position is for all shifts

Total Rewards & Pay Transparency

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: 33.32 – 61.01

Applications for this position will be accepted until May. 29, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Position Purpose:

The CDL Driver & Crane Operator at SRS Building Products ensures safe, efficient transport and delivery of building materials to job sites. Responsibilities include operating trucks, cranes, and forklifts; performing DOT-compliant inspections; coordinating with rooftop loaders; and maintaining accurate documentation. The role also involves customer interaction and warehouse support to uphold service and safety standards.

Key Responsibilities:

• Safely deliver building materials within a 200-mile radius, following DOT regulations and company policies.

• Perform pre- and post-trip inspections, operate cranes and forklifts, and coordinate with rooftop loaders to ensure accurate, damage-free deliveries.

• Verify inventory, document deliveries with photos, and assess job sites for safety risks.

• Provide excellent on-site customer service and support warehouse and yard maintenance.

Direct Manager Direct Reports:

Reports directly to the Assistant Branch Manager or Operations Manager.

Travel Requirements:

This role requires frequent travel within a 200-mile radius for material deliveries, with all trips starting and ending at the home branchensuring drivers return home daily with no overnight stays.

Physical Requirements:

• This physically demanding role requires regularly lifting up to 100 pounds and working outdoors in varying weather.

• Candidates must safely operate commercial vehicles and cranes, navigate ladders and confined spaces, and tolerate high noise levels.

• Routine tasks include driving, material handling, and adhering to all safety regulations.

• Climb ladders and work at heights

• Reasonable accommodations are available per ADA, and the company is committed to equal opportunity and an inclusive workplace.

Working Conditions:

This fast-paced, field-based role focuses on safe, precise, and on-time delivery of building materials within a 200-mile radius. Drivers return home daily with no overnight stays. Success requires strong organization, communication, and customer interaction to meet delivery deadlines and ensure satisfaction at varied job sites.

Minimum Qualifications:

• Valid CDL drivers license with air brakes endorsement

• Proficiency in performing routine maintenance and safety checks

• Knowledge of basic mechanical systems

• Experience operating conveyor belts, knuckle booms, or crane-equipped trucks

• Forklift operation experience; certification preferred

• Knowledge of DOT regulations and OSHA safety standards

• Proficient in English (reading, writing, and verbal communication)

• Skilled in pre- and post-trip vehicle inspections

• Capable of conducting job site inspections and reporting conditions

• Strong adherence to safety protocols

• Clean driving record (no hit-and-run, DWI, or DUI in the past 36 months)

• Must pass background check and drug screening

Preferred Qualifications:

• Professional crane operation experience

• Strong time and route management skills

• Skilled in operating boom cranes, piggyback forklifts, and conveyor systems

• Forklift certification preferred

• Deep knowledge of DOT and OSHA regulations

• Proven commitment to safety standards and practices

• Effective on-site communication and collaboration

• Skilled in strategic material placement to meet customer needs

• Quick resolution of delivery challenges

• Efficient route planning to optimize time and fuel

• Working collaboratively with teams

• Proficient in digital inventory management and order verification

• Committed to continuous learning and skill enhancement

Minimum Education:

High school diploma or equivalent.

Preferred Education:

Vocational or technical training in heavy machinery operation.

Minimum Years Of Work Experience:

12 years of experience preferred. While not strictly required, prior commercial driving experience is strongly recommended. Experience in distribution and forklift operation is a plus.

Certifications:

• Current DOT medical certificate

• NCCCO Crane Certification: ABC/ABL certification is required.

• Truck Crane Operation Certification: Preferred but not mandatory.

• Telescopic Boom - Fixed Cab Certification: Preferred but not mandatory.

• Boom Truck - Fixed Cab Certification: Preferred but not mandatory.

• Articulating Boom Crane Certification: Preferred but not mandatory.

Competencies:

• Leadership & Collaboration

• Able to lead and manage teams effectively

• Adaptable to changing situations

• Works well in team environments

• Encourages innovation and communicates clearly

• Customer-focused and results-driven

• Skilled in conflict resolution

• Maintains a strong safety record and promotes safe practices

• Proficient in operating commercial vehicles, cranes, forklifts, and conveyor systems

• Accurate in inventory checks and site inspections

• Clear, courteous communication with customers and team members

• Focused on customer satisfaction and precise material placement

• Resolves delivery and site issues quickly and effectively

• Efficient in planning routes and managing deliveries

• Supports branch operations through task prioritization

Job Location:

• 
  
• Competitive salaries for all team members paid weekly
  
• 401(k) Retirement Plan with company matching
  
• Employee Stock Purchase Program
  
• Paid Vacation, Sick Time, Volunteer Day, Holidays, Birthday, and Floating Holidays
  
• Paid Parental Leave, Adoption Assistance Program
  
• Medical, Dental and Vision Benefits
  
• Flexible and Dependent Care Spending Accounts
  
• Company paid Life insurance and Short-Term Disability
  
• Additional Life Insurance and Long-Term Disability also offered
  
• Mental, Physical and Emotional Well-Being Programs for Employees and Families
  
• Wellness Program and Safety Program with Bonuses for our Drivers
  
• Employee Referral Bonus Program
  

• Safely operate cranes and adhere to strict safety protocols and practices.
• Assist the crew with concrete placement, shaft excavation, and rebar cage setting when not operating the crane.
• Lift materials weighing up to 50 lbs. and navigate uneven surfaces with ease.
• Work effectively in both hot and cold weather conditions, ensuring project continuity.
• Collaborate with the mechanic to conduct repairs and preventative maintenance on the crane.
• Demonstrate physical flexibility by lifting arms above shoulder level and bending, reaching, turning, and twisting repeatedly in confined spaces.

• Valid certification to operate a crane, such as NCCCO.
• Valid DOT Medical Certification.
• Ability to climb up and down the equipment being operated safely.
• Experience working on construction sites and handling heavy machinery.
• Available for flexible scheduling, including overtime and weekend shifts.

• 401(k) retirement plan.
• Dental, health, vision, and life insurance.
• Employer paid short-term and long-term disability benefits.
• Paid time off to support work-life balance.
• All employees assigned to a job site greater than 75 miles from their home are eligible to receive per diem.

• Full-time position with flexible scheduling options.
• Shifts may vary between 8 to 10 hours, Monday to Friday, with occasional overtime and weekend availability.