Crane Aerospace Electronics Headquarters Jobs in Usa
2,886 positions found
Adjusts and calibrates electronic assembly systems as required.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.
Troubleshoots to the component level.
Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry.
Requires a strong knowledge of Solid State devices and micro-circuitry.
Works in a dynamic production environment and is able to produce at a high level in support of customer schedules.
Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards and signal generators.
.
Basic Qualifications : 1 year of direct experience with testing electronic assemblies Proficient in component level troubleshooting of solid state, digital circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.
Flying probe/high power test experience Must be US Citizen High school diploma or equivalent Desired skills : Familiarity with Radar Systems Vibration and Thermal ESS experience of both circuit card assemblies and sub assemblies Benefits Provided: 401K Medical, dental and vision Sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at #ZR
- 2nd Shift Location: Oldsmar, FL Job ID: #72263 Pay Range: $20-32 Job Description: Sets up test apparatus and conducts tests of electronic circuit card assemblies, RF circuits and subassembly units following methods, procedures, standards, and sequences; lays out and assembles units for production electronic equipment according to designs and specifications.
Adjusts and calibrates electronic assembly systems as required.
Corrects malfunctions by making adjustments or replacing parts or components as directed.
Uses hand and small power tools, and various measuring and testing devices in performing job duties.
Determines types of tests to be performed, approves and suggests modifications to testing equipment, and analyzes test results to evaluate performance of products and equipment.
Assists engineers in design and development of test procedures for new products and recommends product improvements or manufacturing modifications.
May monitor and verify quality in accordance with statistical process or other control procedures.
Troubleshoots to the component level.
Utilizes schematic diagrams to isolate failures on Analog and Digital circuitry.
Requires a strong knowledge of Solid State devices and micro-circuitry.
Works in a dynamic production environment and is able to produce at a high level in support of customer schedules.
Proficient in the use of various measurement devices including Digital Multi-meters, Oscilloscopes, Network Analyzers, frequency Standards and signal generators.
.
Basic Qualifications : 1 year of direct experience with testing electronic assemblies Proficient in component level troubleshooting of solid state, digital circuits.
Able to use Microsoft Suite and other data collection programs to accurately document maintenance actions.
Flying probe/high power test experience Desired skills : Familiarity with Radar Systems Vibration and Thermal ESS experience of both circuit card assemblies and sub assemblies Typical Minimums : High School diploma, or equivalent Must be US citizen Benefits provided: 401K Medical, dental, and vision Sick time as applicable to state law Butler America Aerospace, LLC.
is an equal opportunity employer.
Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics.
The Butler America Aerospace, LLC.
EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices .
Butler America Aerospace, LLC.
is committed to working with and providing reasonable accommodations to individuals with disabilities.
If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at
Delta Electronics (Americas) Ltd. is seeking a power electronics engineer with expertise in power semiconductor module packaging to join our advanced Milan M. Jovanović Power Electronics Lab, located in Research Triangle Park, NC. Through your motivation, creativity, and results-oriented attitude, you will help us to achieve our mission to provide innovative, clean and energy-efficient solutions for a better tomorrow.
In this role, you will have opportunity to develop and verify your ideas to improve the performance of next generation power semiconductor modules in a variety of applications, including but not limited to on-board charging converters, EV traction inverters, charging stations, wind and solar inverters, and energy storage. You will have the opportunity to collaborate with other teams worldwide, interact with suppliers, attend conferences and publish your research work in technical venues.
Power Electronics Packaging Engineer:
Responsibilities
· Propose new concepts to enhance power semiconductor module electrical and thermal performances
· Design, build and verify selected new package concepts and technologies using state-of-the-art multi-physics simulation tools
· Research new approaches to improve the following aspects in the power modules: parasitic components, e-field distribution, insulation, partial discharge, thermal performance, die attach, interconnects, mechanical fatigue, etc…
· Translate application requirements into power semiconductor module specifications
· Interact with chip makers and material suppliers
· Build and maintain technical competency in power electronics packaging technologies
Skills and Experience
You should demonstrate knowledge, understanding and experience with the following topics:
· Standard industry power module technologies
· New packaging technology trends, including but not limited to substrates, die attach, interconnects, encapsulation, insulation, direct cooling, etc
· Power electronics packaging materials and characteristics
· Power electronics concepts (topologies, building blocks, parasitic effects, EMI, losses, partial discharge, etc…)
· Power semiconductor devices (SiC MOSFETS, SiC diodes, Si IGBTs, etc)
· ANSYS simulation (Maxwell, Q3D, etc)
· CAD and CFD simulation tools (SolidWorks, Flotherm, etc…)
· Cost tradeoffs, mechanical tolerances, manufacturability, etc
· Manufacturing process for molding, soldering, wire bonding, sintering, encapsulation, etc…
· Power module failure modes and reliability
Qualifications
· M.S. or Ph.D. degree in Electrical Engineering
· Junior and senior applicants welcome
· Candidates should possess excellent analytical, organizational, interpersonal, and communication skills. You must be self-motivated and able to work independently as well as a member of a team
Aerospace Quality Specialist Precision with Purpose | Align Aerospace Chatsworth, CA
Ready to grow your quality career in aerospace?
Are you the most experienced go-to person for aerospace quality problem solving, catching the smallest details, and making confident calls? Do you want to build a careernot just a jobwith paid training enhancing your aerospace knowledge, customer/supplier interaction, and providing a clear growth path?
Join Align Aerospace as an advanced Aerospace Quality Specialistwhere your sharp eye in quality keeps aircraft safe, your voice strengthens our team, and your career takes off.
Why This Role is Awesome:
- Youll Do More Than Inspect You'll own the quality game from First Article Inspections (FAIs) to root cause investigations, while also working with suppliers and customers to solve issues and prevent them from happening again.
- Grow While You Work We invest in you. From cross-training to certifications, we offer paid development to build your skills and move you forward.
- Be the Go-To Expert Whether it's decoding blueprints, reading GD&T, or leading corrective actions, you'll be the one others rely on.
- Great Vibes, Real Tools This is a hands-on, tool-forward job in a busy warehouse setting where accuracy meets action
What You'll Be Doing:
- Conduct advanced First Article Inspections (FAIs) using micrometers, calipers, ring/thread gauges, optical comparators, and more
- Analyze engineering drawings, blueprints, and customer specs using GD&T
- Investigate and resolve supplier and customer non-conformances
- Work through quality portals to manage customer claims and rejections
- Log NCRs and inspection results into SAP and Excel like a pro
- Lead or support internal/external audits, including supplier corrective actions
- Collaborate across departmentsProduction, Sales, Customer Service, and Quality
- Mentor junior inspectors and help elevate team standards
Requirements:
What Will You Bring as the Ideal Candidate?
- Experience: 35+ years of hands-on inspection experience in aerospace, medical devices, or other high-precision manufacturing environments utilizing all levels of FAI techniques.
- Computer Skills: Confident navigating inspection software, SAP/ERP systems, and Microsoft Excel
- Tool Guru: Expertise with tools like micrometers, calipers, ring/thread gauges, CMM, and optical comparators
- Quality Expert: Deep familiarity with AS9100, AS9102, ISO 9001, FAI's and customer quality requirements
- Decision Maker: A sharp eye and decisive judgment youve led FAIs and made tough calls with confidence
- Strong organizational skills from paperwork to multitasking electronically in a fast-paced environment
- Focus and grit youll be seated at a desk, inspecting in a warm, active warehouse environment.
Bonus Points If You Have:
- Internal auditor certifications (AS9100 or ASQ CQA/CQI)
- Experience using Net-Inspect or other similar inspection systems
- Delegated source inspector credentialing
- SAE or similar inspection certifications.
Benefits Were Proud Of
- 401(k) with company match
- Bonus opportunity annually
- Medical, Dental, and FREE Vision Coverage
- Company-paid Life and Long-Term Disability Insurance
- Paid Holidays + Generous PTO
- Flexible schedules with your choice of Mon-Fri or off every other Monday/Friday
- Casual work environment no lab coats, just casual jeans
- Kickstart your shift in style with our awesome shoe credit program!
- Ongoing career development opportunities
Ready to be the quality expert that helps keep aircraft safe and customers happy?
Apply today and start your ascent with Align Aerospace where precision meets purpose.
At Align Aerospace, we believe diversity fuels innovation and success. We are committed to fostering an inclusive workplace where every individualregardless of race, color, religion, gender, identity, age, disability, veteran status, or any other characteristicis valued and empowered to thrive. We welcome unique perspectives and encourage all qualified candidates to apply.
Lets build the future of aerospace together.
Compensation details: 31-36 Hourly Wage
PIa20dc46a17
Job Description
We are seeking a skilled and safety-focused Crane Operator to join our team. The ideal candidate will be responsible for operating various types of cranes to lift, move, and position heavy materials safely and efficiently on construction and industrial sites.
Responsibilities:
* Operate mobile cranes to lift, move, position, and place materials and equipment.
* Inspect cranes and rigging equipment daily before operation to ensure safety and proper functioning.
* Follow load charts, signals, and site plans to ensure safe and accurate lifts.
* Communicate effectively with signalers, riggers, and ground crews.
* Perform routine maintenance and report any mechanical issues or safety hazards.
* Adhere to all OSHA, site, and company safety regulations.
* Maintain accurate logs of crane operations, loads, and inspections.
* Assist with site setup, teardown, and equipment mobilization as needed.
Qualifications:
* High school diploma or equivalent (GED).
* Valid NCCCO (National Commission for the Certification of Crane Operators) certification or equivalent required.
* Minimum of 2 years of experience operating cranes (mobile, tower, or overhead).
* Knowledge of crane load capacities, rigging, and signaling procedures.
* Strong attention to detail and safety awareness.
* Ability to read and interpret blueprints and lift plans.
* Physical ability to work outdoors in varying conditions.
* CDL (Commercial Driver's License) preferred for mobile crane operators.
Must have active CDL.
Must be certified in Arizona to operate cranes.
Must be able to sit/stand and/or drive for long periods of time.
Must be able to provide or obtain medical examiner certification prior to employment.
Need to be able to commute around Tucson and surrounding areas with ease.
Prior experience operation commercial vehicles and/or long trailer beds is preferred.
Crane Monsters is one of the Best Used Crane dealers in the U.S, we’re based out of the Houston, we buy, sell and repair mobile cranes.
We’re looking to add another experienced Crane Technician/Mechanic to our team.
As an Experienced Crane Tech - you Will be responsible for the inspection, diagnosis, repair and maintenance of various mobile cranes.
Job Responsabilities:
Operate and inspect cranes in order to diagnose defects
Demonstrate working knowledge of CANBUS, LMI Systems, Hydraulic Systems, Electrical Systems.
Examine parts for damage or excessive wear
Read, understand and interpret maintenance manuals, operating manuals, parts manuals and technical drawings
Test mechanical, electrical, pneumatic and hydraulic products and equipment after repair or modification to ensure proper operation
Accomplish tasks independently without direct supervision
Perform thorough inspections
Operate cranes as needed
Maintain conformity to safety requirements and other regulations
Properly fills out working reports, hour's reports, time sheets, hour's overviews and expense reports
Good customer service and communication skills
Set a positive example in punctuality and professional demeanor by respectful communication with all levels of staff, keeping work areas/Field Service Trucks clean & orderly
Promote safety regulations and all other company programs and policies
Willingness to travel by land and air
Ability to work overtime as well as on weekends
A minimum of 3 years of relevant driving
experience
Qualifications:
A minimum 5 years of experience as a Mobile Crane Mechanic/Technician, specifically RTs, All Terrains and Truck Cranes.
Valid driver's license and satisfactory driving record
Ability to lift up to 40lbs
Basic computer skills
Manufacture approved training/certifications required
Benefits:
PTO, Paid Vacation Days, Health, Vision, Dental and Life Insurance, company match Retirement Plan (Waiting period may apply)
Full Time Opportunity:
Yes
Typical start time:
7AM
Typical end time:
4PM
Work Remotely
No
Program Manager – Aerospace & Turbojet Engines
Full Time | 8:00 AM – 5:00 PM
Location: Roswell, GA
Salary Range: $140,000.00 – $160,000.00 Annually
About the Role
A leading designer and manufacturer of world‑class small turbojet engines is seeking a highly motivated Program Manager to oversee programs within its expanding aerospace portfolio. These engines—known for superior power‑to‑weight ratios and low fuel consumption—support advanced U.S. Department of Defense unmanned systems, including drones and missile platforms.
The organization is establishing a new high‑volume manufacturing facility and is seeking exceptional talent to help drive growth, innovation, and execution in a fast‑moving environment.
Position Summary
The Program Manager will lead sustainment programs, new product development (NPD), and R&D initiatives for small turbine engine systems. This hands‑on leadership role requires technical program management capability, strong cross‑functional coordination, and the ability to support operational expansion and business scaling activities.
This position is ideal for someone who thrives in a dynamic environment and wants to make a direct impact on cutting‑edge aerospace propulsion technology.
Key Responsibilities
Program Management
- Lead planning, execution, and delivery of sustainment, development, and R&D programs across the turbojet engine portfolio
- Manage program scope, budgets, schedules, deliverables, and risk profiles
- Collaborate with engineering, manufacturing, quality, supply chain, and customer teams
- Serve as primary customer interface for designated government and commercial contracts
- Ensure compliance with defense/aerospace regulations and contractual requirements
- Track earned value metrics and KPIs; provide reporting to executive leadership
- Manage lifecycle support, warranty activities, and obsolescence strategies
New Product Development & R&D
- Drive development projects from concept through prototype, qualification, and production readiness
- Support proposal creation, SOW development, and cost estimating for advanced technologies
- Align R&D efforts with program goals and business objectives
Business Operations & Facility Expansion
- Support strategic planning, capacity modeling, and production scaling efforts
- Contribute to facility expansion, including layout development, capital equipment planning, and supplier/contractor coordination
- Work with finance, HR, supply chain, and IT to ensure infrastructure readiness for growth
Required Qualifications
- Bachelor’s degree in Engineering, Business, or related technical field (Master’s or PMP a plus)
- 7+ years of aerospace or defense manufacturing experience, including 3+ years in program management
- Hands‑on experience with Earned Value Management (EVM), MS Project, and financial tracking systems
- Proven success managing complex technical programs across the aerospace lifecycle
- Strong understanding of turbine engine development, prototyping, qualification, and sustainment
- Familiarity with DoD/FAA regulations, DFARS, ITAR, and related compliance standards
- Demonstrated leadership of cross‑functional teams and multiple simultaneous projects
- Experience with lean manufacturing, operational scaling, or facility start‑ups
- Excellent communication, negotiation, and problem‑solving skills
- Ability to operate effectively in a fast‑paced, growth‑stage environment
- Due to the defense‑related nature of the work, U.S. citizenship is required under applicable federal regulations
What We Offer
- Opportunity to contribute directly to cutting‑edge aerospace technology and facility growth
- Competitive salary and comprehensive benefits (health, dental, vision, 401(k), PTO)
- High‑visibility role within a collaborative, fast‑moving organization
Let's Connect -
VP, Operations– Leading Aerospace & Defense Components Manufacturing – Private Equity
Our client is a leading private equity backed manufacturer of highly engineered components for defense and aerospace primarily serving large aerospace OEM’s and blue-chip defense contractors. The company is highly regarded for its innovation and engineering capabilities and is currently experiencing significant growth through organic means, with acquisitions playing a key role for future growth. The company is seeking to recruit a dynamic and hands-on VP, Operations who will wear multiple hats as they drive operational improvements across the organization and scale production and engineering capabilities for growth.
We are seeking a proven operations leader with demonstrated success driving operational excellence through the introduction of best practices and process within a highly entrepreneurial environment. This individual will have previous aerospace, automotive or medical device manufacturing experience working with OEM’s and prime contractors. Background experience in Lean process improvement, Continuous Improvement and other systems such as TPS or Six Sigma is a significant asset, as is highly engineered precision machining manufacturing. This position requires a hands-on executive who spends time on the shop floor and has the ability to lead transformation with a strong focus on performance improvement, quality and data driven decision-making.
An attractive compensation package is on offer that will include bonus opportunities and equity participation.
Pacific International has been exclusively retained by a global leader in the development and production of consumer electronic components, enabling their customers to innovate and expand capabilities.
As they have sustained themselves as a global market leader, they are looking for an Account Director to further expand their reach in the consumer electronics industry. This is a highly visible position with the opportunity to build and deploy strategies for a global organization.
Key Responsibilities
- Lead customer strategy, serving as the primary point of contact and building strong cross‑functional relationships while overseeing commercial and technical initiatives.
- Identify new technology opportunities, expand engagement across business units, and pursue growth with additional OEMs by aligning solutions to customer roadmaps.
- Coordinate with global engineering, operations, and program teams to drive successful development from concept through mass production.
- Lead pricing negotiations, contract and agreement reviews, and annual planning to drive revenue growth while ensuring profitability and long‑term alignment.
- Monitor market trends, emerging technologies, and competitive activity to guide strategy.
- Maintain accurate forecasting, pipeline visibility, and account documentation using CRM and internal tools.
Ideal Candidate Profile
- Bachelor’s degree in engineering, Business, or a related field
- 7-10+ years of sales experience in the consumer electronics or electronic component industry.
- Direct experience managing relationships with consumer electronic OEMs is required.
- Experience managing global customers,
- Proven ability to manage multi-stakeholder accounts within the consumer electronics industry.
About Pacific International Executive Search:
Pacific International, a globally recognized retained executive search firm, is dedicated to empowering Fortune 500, FTSE 100, and high-growth enterprises in building exceptional C-suite, senior-level, and strategic leadership teams while championing diversity and inclusion. Our adaptability, agility, and forward-thinking ethos distinguish us in the ever-evolving business landscape.
Since 1997, we have been dedicated to building lasting client partnerships based on trust and reliability, and a proven track record of successful C-suite and mid- to senior-level leadership project delivery across many key industries globally.
Diversity Statement:
At Pacific International, diversity, equity, and inclusion are at the core of who we are and what we do. Our commitment to these values is unwavering and we proudly champion diversity on behalf of our clients in every Executive Search mandate we undertake. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status, or other characteristics protected by law. In pursuit of these objectives, we actively encourage applications from individuals of all backgrounds and identities.
Job Summary:
We are seeking a detail oriented Soldering Technician to join our production team. This role is responsible for assembling, soldering, and repairing circuit boards used in electronic devices. The ideal candidate will have experience working with electronic components and possess strong attention to detail to ensure high quality workmanship and functionality.
Key Responsibilities:
- Assemble and solder circuit boards used in electronic devices
- Work with components such as resistors, capacitors, and integrated circuits
- Inspect and test circuit boards to ensure proper connections and performance
- Identify and troubleshoot defects or connectivity issues
- Follow technical diagrams, schematics, and work instructions
- Maintain quality control standards during the assembly process
- Follow all safety procedures and maintain a clean work environment
- Collaborate with team members to meet production goals
Qualifications:
- Experience with soldering and electronic assembly preferred
- Familiarity with electronic components and circuit boards
- Ability to read technical diagrams or schematics
- Strong attention to detail and manual dexterity
- Ability to troubleshoot and identify assembly issues
- Technical training or certifications in electronics is a plus
Skills:
- Precision and steady hands
- Problem solving and troubleshooting abilities
- Strong focus on quality and accuracy
- Ability to work both independently and as part of a team
