Colliers Engineering Design Jobs in Usa

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Radar Hardware Design Engineer, you will be a part of our Radar Engineering team. The Radar Engineering team is comprised of a small cross-functional team of motivated and experienced engineers; we're responsible for designing, building, and testing cutting-edge phased array radar systems from concept to certified product. We enjoy a culture of sharing information and collaboration. Phased array radar systems have historically been reserved for specialized applications, but we're making this technology affordable to enable Detect and Avoid for widespread commercial applications. This role will focus on new advanced operational modes. The passion for revolutionary technology to make aviation safer motivates us to come in every day.

Responsibilities

In your role as a Radar Design Engineer, you will be responsible for designing digital and analog circuits for our next-generation Radar system. You will be involved in all phases of development, from conception to production, tracing system-level requirements through to circuit-level design. You will drive the design and layout of a multi-processor with an FPGA on chip using DDR 4 memory, as well as designing switching and linear power supplies. The high-speed digital design is complemented by high-frequency analog and RF design up to 12GHz. You will own the schematic, layout, artwork generation and bring-up of hardware. You will be collaborating with the cross-functional teams, including mechanical and system engineering. You will be responsible for the certification of your design to DO-160, DO-254 design assurance and FCC certification. You will support radar system integration and testing in the engineering lab and on the aircraft.

Basic Success Criteria

• Electrical Engineering fundamentals, typically gained through a Bachelor's Degree of Science or Engineering in Mechanical, Electrical, Aerospace, or a related discipline

• 5+ years of professional hands-on experience with high-speed digital circuits, linear and switching power regulator circuits, PLL's, VGA, mixers etc.

• Ability to use Circuit simulators, Altium schematic capture and layout, and SPICE simulation software

• Ability to troubleshoot, find root cause, and resolve issues

• Experienced in using oscilloscopes, logic analyzers, spectrum analyzers and Vector Network Analyzers

Preferred Criteria

• Advanced Degree of Science or Electrical Engineering

• Experience developing system architectures and managing requirements for certification of Avionics

• Creative problem solver that can bring multiple disciplines together, with the ability to assess risk and make design and development decisions without all available data

• Experience integrating and troubleshooting various electronic sensors and components

• RF circuit design experience up to 12GHz

• DO-160 and DO-254 hardware design assurance experience

This position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

The estimated salary range for this position is $190,000 to $250,000/annual salary + cash and stock option awards + benefits. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $190K - $250K

At Rite-Hite, your work makes an impact. As the global leader in loading dock and door equipment, we design and deliver solutions that keep our customers safe, secure, and productive. Here, you'll find innovation, stability, and the chance to grow your career as part of a team that's always looking ahead.

Are you a mechanical engineer who enjoys solving real-world problems, working hands-on with products, and contributing to designs that improve safety and performance? Join Rite-Hite's engineering team and help evolve our industry-leading vehicle restraint systems - including our flagship Dok-Lok product line.

This role offers a mix of product design, problem solving, and project-based work, with opportunities to contribute across product improvements, cost initiatives, and new development efforts as our roadmap evolves.

• Design and develop mechanical and structural components for vehicle restraint systems and related products

• Create and modify 3D models, assemblies, and drawings using SolidWorks (or similar CAD tools)

• Support product changes, enhancements, and new development projects across the product lifecycle

• Collaborate with product management, manufacturing, supply chain, and testing teams to bring designs from concept through release

• Select materials and components with consideration for performance, cost, and manufacturability

• Participate in prototype builds, testing, and validation activities to ensure designs meet real-world requirements

• Contribute to continuous improvement initiatives, including cost reduction (VAVE) and design optimization

• Own small engineering projects or workstreams, helping drive progress from problem definition to solution

• Bachelor's degree in Mechanical Engineering or a related field

• 2-3 years of post-graduation engineering experience in product design, development, or project-based engineering work

• Hands-on experience designing metal components and fabricated parts (e.g., machined parts, structural components, weldments, brackets)

• Proficiency in 3D CAD (SolidWorks preferred; Creo or similar acceptable)

• Experience working on cross-functional engineering projects - beyond routine ECN-only work

• Strong problem-solving skills and a practical, detail-oriented engineering mindset

• Ability to communicate effectively and collaborate across disciplines

• Experience with moving or mechanical systems (e.g., mechanisms, linkages, actuators, rotating components)

• Exposure to new product development (NPD), VAVE, or stage-based project workflows

• Experience with testing, validation, test plans, or tools such as DFMEA/FMEA

• Familiarity with electromechanical systems or working alongside electrical engineers

• Work hands-on with physical products in an R&D and test lab environment

• Contribute to a mature but evolving product line with a clear roadmap and room for innovation

• Be part of a flexible, collaborative engineering team where responsibilities may vary year to year

• Gain exposure to a range of engineering work - from product improvements to early concept support - depending on business needs

What We Offer

At Rite-Hite, we take care of our people - because when you're supported, you can do your best work. Our benefits are designed to support your health, your future and your life outside of work:

• Health & Well-being: Comprehensive medical, dental, and vision coverage, plus life and disability insurance. A robust well-being program with an opportunity to receive an extra day off and more.

• Financial Security: A strong retirement savings program with 401(k), company match, and profit sharing.

• Time for You: Paid holidays, vacation time, and personal/sick days each year.

Join us and build a career where you're supported - at work and beyond.

Rite-Hite is proud to be an Equal Opportunity Employer. We consider all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected characteristic under federal, state, or local law.In accordance with VEVRAA, we are committed to providing equal employment opportunities for protected veterans.We are also committed to maintaining a drug-free workplace for the safety of our employees and customers.

Overview

Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech

Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values

Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:

1. Students are our top priority.

2. We strive for excellence.

3. We thrive on diversity.

4. We celebrate collaboration.

5. We champion innovation.

6. We safeguard freedom of inquiry and expression.

7. We nurture the wellbeing of our community.

8. We act ethically.

9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

About The Wallace H. Coulter Department of Biomedical Engineering

The Wallace H. Coulter Department of Biomedical Engineering at Georgia Tech and Emory University has a student body of 1,200 undergraduates, 260 graduate students, and 70 primary and 73 program faculty. In 2023 US News Graduate Program Rankings placed the department as the #1 ranked department in BME in the United States and our Undergraduate Program as the # 2 department in the United States. Since its beginning, the unique partnership between two of the nation's leading public and private entities has been an innovation engine for research and education. Combining the engineering and medical strengths at Georgia Tech and Emory, we are focused on solving some of the toughest problems facing our state, the nation, and the world.

Atlanta, GA

The Kwong lab in the Wallace H. Coulter Department of Biomedical Engineering at the Georgia Institute of Technology invites applications for a non tenure-track research faculty position in Laboratory for Synthetic Immunity.

The Laboratory for Synthetic Immunity (LSI) is an interdisciplinary research group in the Department of Biomedical Engineering at Georgia Tech & Emory School of Medicine. Founded in 2014 by Director Dr. Gabe Kwong, the mission of LSI is to pioneer the next wave of immunotherapies and diagnostics to intercept diseases at an early stage and develop treatments that drive deep responses to meaningfully improve patient outcomes.

We are currently seeking exceptional individuals to join our research group as a Research Scientist. The successful candidate will be a motivated and creative individual that will pioneer new categories of immune biosensors that leverage design principles from synthetic biology and cell engineering for early cancer detection. They will take a lead role in experimental design, execution of experiments, and interpretation of results to achieve the major objectives of the project.

The successful candidate will thrive on teamwork and collaboration. They will embrace a fast-paced environment and work closely with lab members to cultivate a positive and inclusive environment. This is a unique opportunity to join a well-funded research group with a track-record of academic excellence, breakthrough innovation and technology translation!

• Work closely with the director and lab members in experimental design, bench and animal studies,
• Play a lead role in regular internal project meetings and data reviews.
• Provide research expertise to aid lab trainees including graduate students, and undergraduates to achieve their research objectives and degree milestones.
• Work with the lab director and university officials in grant administration, project budgets, and scientific reporting.
• Play a lead role in drafting manuscripts and grant applications.
  

This vacancy is an open rank announcement. Final job offer will be dependent on candidate qualifications in alignment with research faculty ranks as outlined in section 3.2.1 of the Georgia Tech Faculty Handbook (faculty-handbook/3.2.1-research-faculty-hiring-and-promotion-guidelines

Research Scientist I

• Bachelor's degree in Biomedical Engineering or a related field
  

Research Scientist II

• A Master's degree in Biomedical Engineering or related field, and three (3) years of relevant full-time experience after completion of that degree, or
• A Master's degree in chemical engineering or related field, and five (5) years of relevant full-time experience after completion of a Bachelor's degree, or
• A Doctoral degree.

• Ph.D. in Biomedical Engineering, Bioengineering, Immunology, or related fields with deep expertise in cancer immunology and/or biosensors.
• Expertise in the design and testing of sense-and-respond biocircuits for cancer therapy or diagnostics.
• Proficiency in cell and molecular biology techniques including sterile technique, cell culture, chromatography, electrophoresis, and flow cytometry.
• Proficiency in animal studies including live animal imaging, animal handling and drug administration, necropsy and cell isolation.
• Skilled in molecular cloning, lentivirus production, T cell transduction, protein production and purification.
• Experience with T cell isolation, tumor inoculation; isolation, and dissociation of mouse tumor xenografts.
• Experience with qPCR, next-generation sequencing (NGS) library preparation, NGS data analysis is plus.
• Proficiency with statistical software like SPSS and/or GraphPad Prism.
• Excellent organizational, communication, time-management, and collaboration skills are required.
• Demonstrated desire to mentor graduate and/or undergraduate students.

• CV/Resume
• Cover letter

Dr. Gabe Kwong, Associate Professor, Wallace H. Coulter Distinguished Faculty Fellow . The candidate of choice will be required to pass a pre-employment background screening. employment/pre-employment-screening.

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

Job Title– Electrical Engineer (DRE)

Location: Novi, Michigan, USA

Job-Type: Full-Time

Job Summary

The Electrical Distribution System (EDS) Components Design Responsible Engineer (DRE) is responsible for the design, development, validation, and release of electrical distribution system components for Scout Motors’ all-electric pickup trucks and SUVs. The role involves managing component design from concept through production launch, collaborating with internal teams and suppliers, and ensuring compliance with safety regulations and engineering standards.

Key Responsibilities

1. Component Design and Development

• Design and develop all EDS components including:
• Shields
• Troughs
• Grommets
• Connectors and terminals
• Power distribution components
• Manage the full product lifecycle from concept design (clean-sheet development) through virtual development, testing, validation, and manufacturing launch.

2. Technical Specification & Sourcing Support

• Collaborate with Purchasing and Finance teams to develop detailed technical specifications.
• Support the quotation and sourcing process for EDS components.
• Work closely with suppliers to ensure components meet cost, timing, and quality targets.

3. Standards and Component Library Development

• Develop and maintain a standardized library of core EDS components aligned with global Volkswagen Group standards.
• Ensure components can be effectively integrated into vehicle wiring harness and power distribution systems.

4. Cross-Functional Collaboration

• Partner with VW Group module owners, internal engineering teams, and external suppliers to define and release EDS components.
• Foster a collaborative, high-performance engineering culture within the team.

5. Verification and Validation

• Conduct virtual simulations and physical testing for component verification.
• Participate in field testing and product validation activities to confirm performance and reliability.

6. Compliance and Safety

• Ensure all designs meet automotive safety standards and U.S. government regulatory requirements.
• Apply Six Sigma methodologies to improve product quality and solve engineering problems.

7. Manufacturing and Production Support

• Contribute to the design and development of production facilities for Scout electric vehicles.
• Support the transition of components from development to mass production launch.

8. Continuous Improvement

• Monitor consumer experience and feedback to identify potential system improvements.
• Proactively recommend enhancements to EDS systems and components.

Required Qualifications

Education

• Bachelor’s or Master’s degree in:
• Electrical Engineering
• Mechanical Engineering
• Systems Engineering
• Or a related engineering field.

Experience

• Minimum 5+ years of experience in:
• Electrical wire harness design
• Power distribution components design and release
• Automotive product development processes including design, testing, and production launch.

Technical Skills

• Strong expertise in:
• Wire harness component design
• Power distribution systems
• Six Sigma problem-solving methodology
• Familiarity with Computer-Aided Engineering (CAE) tools or relevant simulation technologies.

Date Posted:

Country:

Location:

Position Role Type:

U.S. Citizen, U.S. Person, or Immigration Status Requirements:

Security Clearance Type:

Security Clearance Status:

Are you ready to explore the world of aerospace and defense? Do you want to learn from and collaborate with some of the greatest minds in the industry? At RTX, our internships, co-ops and full-time careers provide an exceptional foundation to work on complex problems, advance your skills and create a safer, more connected world. Discover opportunities to make a difference at RTX.

At Raytheon, the foundation of everything we do is rooted in our values and a higher calling – to help our nation and allies defend freedoms and deter aggression. We bring the strength of more than 100 years of experience and renowned engineering expertise to meet the needs of today's mission and stay ahead of tomorrow's threat. Our team solves tough, meaningful problems that create a safer, more secure world.

The Mechanical Engineering (ME) organization leads in mechanical hardware design, development, as well as production using state-of the-art tools, processes, technology, and Six Sigma principles. ME's capabilities encompass a broad range of technical disciplines which include engineering, manufacturing, technical services, materials, processes, analysis, test, and documentation.

The Shipboard Effectors Department is currently searching for an experienced Mechanical Design Engineer II to work on a multi-discipline team to support the production of Shipboard Effectors products and subsystems located in Huntsville, AL.

This is an onsite role with regular support required in a production missile integration facility.

This position requires strong communication skills to collaborate across Engineering, Operations, Supply Chain, and Quality. Experience with hardware integration and test, supplier first article inspections, production work instructions and failure investigation principals are strongly desired.

Candidate will work closely with Integrated Product Team Leads/Program Managers to ensure that engineering requirements are defined, risks are managed, and schedules/budgets are met. Candidate will ensure Technical Data Packages are maintained and updated as necessary. Decisions must be data driven in nature and require preparing technical justification analysis reports as well as presenting to a variety of Engineering Review Boards.

What You Will Do

• Contribute to finding solutions to a wide range of technical problems related to the design, manufacture, integration, and production sustainment of various mechanical subsystems, including support in the engineering lab and the factory floor both at Raytheon and at suppliers
• Support first article inspections, work instruction reviews, material dispositions, and root cause investigations for production issues. Decisions are data driven and require preparing technical justification analysis reports and presenting to a variety of Engineering Review Boards
• Perform mechanical design, development, and documentation of components, subassemblies, and end items for defense system equipment in accordance with system requirements
• Interface with other engineering disciplines, non-technical disciplines, and suppliers to develop design solutions and resolve technical issues
• Regular onsite support at Missile Integration Facility
• Periodic travel to suppliers or other program sites will be required (10-15%)

Qualifications You Must Have

• Master of Science Degree in Mechanical Engineering, Aerospace Engineering, or similar Engineering discipline
• This position requires 12 months or less of relevant professional work experience (excluding internships)
• Experience with 3D CAD tools (modeling and drawing)
• Experience with interpreting assembly and/or component drawings

Qualifications We Prefer

• Experience with Geometric Dimensioning & Tolerancing (GD&T) per ANSI Y14.5
• Proficient in Creo (modeling and drawing) and Windchill (PDM)
• Mechanical aptitude to provide solutions to a variety of technical problems of

moderate scope and complexity.

• Strong interpersonal and communication skills; both verbal and written
• Ability to work in teams or independently, flexible, demonstrates initiative.

What We Offer

• Our values drive our actions, behaviors, and performance with a vision for a safer, more connected world. At RTX we value: Safety, Trust, Respect, Accountability, Collaboration, and Innovation.
• Relocation Eligibility

Learn More & Apply Now!

• Please consider the following role type definition as you apply for this role.

• Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products.
• Please upload a copy of your most recent transcripts with your resume when applying to this requisition. Include your cumulative GPA and projected graduation date on your resume.
• This position requires a security clearance. DCSA Consolidated Adjudication Services (DCSA CAS), an agency of the Department of Defense, handles and adjudicates the security clearance process. More information about Security Clearances can be found on the US Department of State government website here: part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote.
  The salary range for this role is 68,900 USD - 131,100 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window.

  RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act.

  Privacy Policy and Terms:

  Click on this link to read the Policy and Terms

Southern California | Full-Time | Engineering + Field Integration

$130K – $160K DOE + Benefits

Confidential Client – Wireless Infrastructure & Public Safety Systems

We are seeking a Design & Compliance Engineer to lead in-building DAS and ERRCS engineering with a primary focus on California Title 24 and IFC Section 510 compliance. This is not just a commissioning role.

This position owns the technical integrity of the system from design validation through AHJ approval.

The ideal candidate ensures systems meet public safety code requirements, recommends compliant product solutions, prepares engineering submittals, and value engineers projects while preserving performance and inspection approval.

Primary Role Overview

This engineer serves as the technical authority on:

• Code-compliant system design
• Product selection & specification
• AHJ coordination
• Submittal preparation
• Coverage validation
• Value engineering
• You ensure systems are engineered correctly the first time and pass inspection.

Core Responsibilities

1. Engineering & Compliance Oversight

• Review and validate DAS / ERRCS RF designs for code compliance

• Ensure systems meet CA Title 24, California Fire Code (IFC 510), and local AHJ standards

• Validate minimum signal strength (-95 dBm or jurisdictional requirement)

• Ensure grid testing percentages meet jurisdictional coverage thresholds

• Confirm critical area coverage (stairwells, fire command centers, elevator lobbies, etc.)

• Interpret fire department amendments and jurisdiction-specific variations

• Interface directly with AHJs to resolve technical requirements

2. Product Specification & Recommendation

• Recommend compliant DAS / ERRCS equipment based on project conditions

• Evaluate OEM solutions (JMA, SOLiD, ADRF, CommScope, etc.)

• Ensure battery backup, monitoring, fiber/coax pathways, and survivability requirements meet code

• Prepare detailed Bill of Materials (BOM)

• Provide technical guidance to PMs and installation teams

3. Submittals & Documentation

• Prepare engineering submittals for AHJ review

• Generate RF design documentation using iBwave

• Provide compliance letters and engineering narratives

• Support permit submission packages

• Coordinate redlines and design revisions

• Produce acceptance testing documentation

4. Value Engineering

• Identify cost-efficient alternatives without compromising compliance

• Optimize amplifier placement and antenna layout

• Reduce overdesign while maintaining inspection success

• Provide technical trade-off analysis when necessary

5. Field Validation & Commissioning Support

• Conduct RF site surveys and grid testing

• Oversee commissioning and optimization

• Support final acceptance inspections

• Coordinate annual testing documentation as required

Required Qualifications

• 3-5+ years DAS / ERRCS / RF systems experience

• Strong understanding of wireless infrastructure and RF propagation

• Experience with commissioning, optimization, and troubleshooting

• Ability to interpret construction drawings and technical documentation

• Strong communication skills and field professionalism

• Valid driver's license & travel flexibility

Preferred Qualifications

• iBwave certification

• FCC GROL License

• NICET - In-Building Public Safety Communications

• DAS OEM Certifications (JMA, SOLiD, CommScope, ADRF, etc.)

• OSHA 10/30

• Fiber & coaxial termination/testing experience

What Makes Someone Successful Here

• Understands California compliance-driven DAS deployments

• Comfortable working between engineering and field operations

• Able to work directly with inspectors, fire officials, and project stakeholders

• Strong troubleshooting mindset with attention to detail

• Executes with accountability and professionalism

Why This Role

• Work on high-profile commercial & public safety projects

• Strong engineering support and stable project pipeline

• High-demand niche skillset (ERRCS / Title 24 expertise)

• Competitive salary + full benefits

Interested?

This is a confidential search. Apply or comment DAS on the post and we will reach out for more details and to discuss fit.

PCBA Design Engineer

Design Custom Electronics That Power Real-World Products

Are you an electrical engineer who enjoys seeing your designs move from concept to real production hardware? This is an opportunity to join an engineering team where your ideas and technical expertise shape the products being built.

In this role, you will design custom printed circuit board assemblies used in industrial and embedded systems. Every project is unique! Meaning you won’t be stuck supporting the same product for years. Instead, you’ll work on a wide variety of applications while collaborating with other engineers and customers to develop PCB electronic solutions.

If you enjoy solving problems, working hands-on with custom boards, and taking designs from prototype through production, this role may be for you!

Why This Role?

• Work on diverse, custom projects with no repetitive product cycles
• See your designs come to life from prototype through full production
• Small engineering team where your impact is significant
• Strong mentorship and collaboration with experienced engineers
• Opportunities for advancement into senior engineering and leadership roles
• Flexible work hours and a supportive, engineering-driven culture
• Stable and growing company with long-term demand for its products

What You’ll Do:

• Design schematics and printed circuit board assemblies (PCBA) for industrial and embedded applications
• Select electronic components based on performance, lifecycle, availability, and cost
• Review and support PCB layout with attention to signal integrity, power distribution, and thermal considerations
• Collaborate with firmware and mechanical engineers to ensure successful system integration
• Support design for manufacturability, assembly, and testing (DFM / DFA / DFT)
• Create and maintain design documentation including schematics, BOMs, and test procedures
• Assist with prototype builds, bring-up, debugging, and validation testing
• Support ongoing product improvements and design updates

Qualifications:

• Bachelor’s degree in Electrical Engineering or significant PCB design experience
• 3+ years of experience designing printed circuit boards (PCB)
• Schematic design experience using Altium software is preferred
• Basic understanding of analog and digital circuit design
• Familiarity with microcontrollers, sensors, and communication interfaces
• Ability to interpret datasheets, schematics, and manufacturing documentation

Compensation & Benefits:

• Base salary: $90,000 – $115,000
• Annual performance cash bonus
• Comprehensive benefit package including all insurance and retirement
• Continuing education allowance
• Flexible work schedule options
• Team events and company gatherings
• A collaborative engineering culture where you will be supported

Apply Today!

This role offers clear paths for career advancement, including opportunities to grow into a Senior Engineer, Project Manager, and Engineering Manager.

If you have PCB Design experience, we encourage you to apply today!