Codex Install Jobs in Usa

Cable Technician - Onsite in Arlington, VA

Your Impact
Own your opportunity to support mission-critical operations for the largest government agency in the nation. Make a meaningful impact by advancing the Department of Defense's mission to keep our country safe and secure.

Job Description:

AGE Solutions is looking for a Cable Technician to join our team onsite at the Pentagon in Arlington, VA in support of our DoD customer. Due to the nature of work this role entails, telecommuting is not permitted and will require the employee to report full-time onsite.

The Cable Technician is responsible for installation and documentation of new and/or updated Inside Plant cable infrastructure to include conduit, cable trays, copper, coax, fiber and all associated elements in the Pentagon, Mark Center & buildings within the National Capital Region (NCR).

Responsibilities Include:

• 
  
• Analyzes, administers, and maintains telecommunications and network cabling infrastructure.
  
• Responsible for tasks assigned by Coordinators in connection with service orders and repair activities related to Category 6 cabling, Voice over IP networks (VOIP), and fiber optic cabling infrastructure.
  
• Installs, maintains and repairs voice and data communications systems.
  
• Interprets service orders, circuit diagrams, and electrical schematics.
  
• Tests, locates, installs, and repairs cabling infrastructure associated with trouble calls, and performs routine maintenance.
  
• Verifies work order information and receipt of all necessary equipment and information.
  
• Verifies service by testing installed cabling, identifying, correcting, or escalating problems.
  
• Well versed in the use of network cabling test equipment including network testers, copper cable testers, fiber OTDRs and fiber power meters.
  
• Documents network by labeling and routing equipment and cables; recording configuration diagrams and specifications.
  
• Maintains network by troubleshooting and repairing outages; testing network back-up procedures; updating documentation.
  
• Identify, track and remove abandoned cable, and keep cable neatly tied and bundled while maintaining safety standards.
  
• Dress, terminate and test cables and components including CAT6 and fiber optic cabling.
  
• Must follow JSP and commercial best practice procedures, standards required for installation of cable racks, wiring of the racks and testing required during installation.
  
• Participates in special projects as required.
  

What you'll need to succeed (Required):

• 
  
• Citizenship and Clearance:
  
  • 
    
  • US Citizenship is required.
    
  • Must have and maintain an active DoD Top Secret security clearance.
    
  
  
  
• Education:
  
  • 
    
  • Associate's degree.
    
  • An additional 2 years of related technical experience may be substituted in lieu of degree.
    
  
  
  
• Years of Experience:
  
  • 
    
  • A minimum of 3 years' experience (5 years without an associate degree)
    
  
  
  
• Skills and Knowledge:
  
  • 
    
  • Must be familiar with BICSI rules, regulations, and standards.
    
  • Must have the ability to communicate effectively to personnel of various expertise levels, possess robust customer support skills in a high visibility environment, and maintain a high attention to detail and accuracy.
    
  • In-depth knowledge of TDM networks.
    
  • Ability to work with power tools and ladders.
    
  • Ability to work well with others and communicate with supervisors.
    
  • Computer literate with basic Networking Skills.
    
  • Maintain current knowledge of relevant technologies as assigned.
    
  
  
  
• Travel Required: 25-50%
  

Preferred Qualifications:

• 
  
• Certification:
  
  • 
    
  • BICSI Installer 1 (INST1) | Building Industry Consulting Service International (BICSI) - Must be willing to obtain within 90 days of joining.
    
  
  
  

Work Environment and Physical Demand:

• 
  
• Prolonged periods of sitting and working at a computer.
  
• May require ability to lift up to 50 lbs.
  
• May require the ability to crawl on the floor and in tight spaces, and climb ladders and elevated platforms to install equipment, cables, and fiber.
  

Compensation: $65,000+

At AGE Solutions, we reward performance, invest in growth, and share success. Our benefits support the whole person, professionally, financially, and personally.

• 
  
• 26 Days Paid Leave: Includes vacation, sick, personal time, and holidays. You choose how to use it.
  
• Performance Bonuses: Performance bonuses are awarded based on individual contributions and company-wide results, aligning recognition with impact.
  
• 401(k) with Match: We match 3% of your contributions with immediate vesting.
  
• Financial Protection: Company-paid life insurance up to $300K and options for additional coverage for you and your dependents.
  
• Health Benefits: Multiple medical plans, dental, vision, FSA and HSA options to fit your needs.
  
• Parental Leave: 15 days of fully paid leave for new parents, because family matters.
  
• Military Differential Pay: We bridge the gap for employees on active duty, so they don't take a financial hit while serving.
  
• Professional Growth: Paid training and certifications, tuition reimbursement, and the tools and tech to get the job done right.
  
• Shared Success: In the event of a company sale, our CEO has committed to returning 80% of net proceeds to employees. This ensures our team shares in the long term value they help create.
  

At AGE, you'll do work that matters, supported by a company that delivers for its people.

• 
  
• Estimate and scope MEP trades during pre-construction (as applicable / future support)
  
• Review Contract Documents, making suggestions/modifications as they relate to the MEP trades and approved construction drawings and specifications
  
• Review BOD for MEP compliance
  
• Review and coordination of submittals and shop drawings
  
• Act as Energy Marshall in the isolation and energization of all electrical equipment in accordance with the safety plan.
  
• Assist Superintendent and Field Staff in managing MEP subcontractors throughout duration of the project (from groundbreaking through commissioning and turnover to owner)
  
• Assist with scheduling MEP installation activities.
  
• Review, inspect, and provide oversight of construction drawings during MEP installation
  
• Work with Superintendent on project logistics and temporary facility plans
  
• Review and comment on scope, material, and equipment for MEP systems prior to installation
  
• Monitor the installation and start-up of MEP systems and commissioning of project with Engineer & Owner
  
• Inspect MEP installation during construction.
  
• Review Coordination and Arc Flash studies
  
• Review and provide field verification of torque and meggar reports provide by trades, and assure reports are submitted during final turnover.
  
• Coordinate activities, materials procurement and other related activities with Project Superintendent and Field Staff
  
• Communicate progress and prepare appropriate reports as needed (Procore)
  
• Represent SE MCS regarding the MEP process at weekly Owners and contractors' meetings.
  
• Mentor project staff, if applicable
  
• Lead and direct the coordination process to resolve all conflicts during installations and start-up
  
• Perform other duties as assigned.
  
• Schedule shifts may incl nights/weekends as per bell curve requirements
  
• Significant travel required for this role - 50% (rotating two or three weeks on project site and one week working remote)
  

• 
  
• Bachelor's/Associates Degree a plus or comparable experience in mechanical, electrical or fire protection/life safety engineering, construction management.
  
• Construction trade specific experience with increasing levels of responsibility and demonstrated abilities to direct the work of others.
  

• 
  
• Proficient in Microsoft Office or related software, Procore preferred.
  

• 
  
• Supervises subordinate employees. Carries out supervisory responsibilities in accordance with the organization's policies and applicable laws. Responsibilities include interviewing, hiring, and training employees; planning, assigning, and directing work; appraising performance; rewarding and disciplining employees; addressing complaints and resolving problems.
  
• Occasionally lift and/or move up to 25 pounds, and ability to bend, stoop, kneel, crouch, or crawl. Frequent use of hands to fingers, and ability to reach with hands and arms. Specific vision abilities required include close vision, ability to adjust focus, and ability to see color. Requires eye-hand coordination and manual dexterity sufficient to operate office equipment. Requires normal range of hearing and eyesight to record, prepare and communicate written or online documentation. Involves contact with other individuals. Frequent sitting, standing, and walking. Work is performed primarily indoors.
  

• 
  
• No supervisory responsibilities
  

• 
  
• While performing the duties of this job, the employee is regularly required to sit; Standing and walking is required. The noise level in the work environment is usually moderate. The employee must occasionally lift and carry up to 50 pounds.
  

Benefits to Joining Our Team

CPG offers a competitive and comprehensive package that includes additional benefits beyond enhanced medical, dental, and vision coverage

• 
  
• Health Benefits - (Medical, Dental & Vision Insurance)
  
• Flexible Spending Account Options
  
• 401K Plan
  
• Employer paid Life & Disability Insurance
  
• Paid Time Off
  
• Employee Referral Program
  
• Employee Assistance Program (EAP)
  

CPG is an equal opportunity employer. We will consider all employment applicants without attention to age, race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Learn more about CPG by checking out our website here

#LI-TG1

Facilities and Business Operations:

The Facilities and Business Operations at UCF is dedicated to fostering a conducive educational environment for our faculty, staff, students, and the broader community. We are committed to excellence, providing unparalleled expertise, and maintaining a world-class standard in service.

Please visit us at: or Facebook and Instagram: UCF Facilities

The Opportunity:

The Facilities Operations Landscape department within Facilities and Business Operations is looking for a Landscaper II to join their team! This will be a member of the Landscape Operations Projects team responsible for skilled installation and renovation of campus landscapes.

Responsibilities:

• 
  

• Support the Landscape Operations Projects Team by assisting with planning, coordinating, and executing landscape installation projects across campus.

  
  

• Perform site preparation and install, transplant, or remove trees, shrubs, groundcover, and other landscape materials.

  
  

• Assist the Hardscape Team with concrete removal and repairs, paver walkway work, pothole patching, and other small hardscape projects.

  
  

• Provide support to the Urban Forestry team, including pruning, tree removals, stump grinding, and related tasks.

  
  

• Remove, repair, and install site furnishings such as benches, trash receptacles, and other outdoor fixtures.

  
  

• Coordinate project handoffs by identifying maintenance needs and providing sitespecific recommendations to maintenance crews.

  
  

• Operate landscape and construction equipment safely and effectively as needed for project work.

  
  

• Perform other duties as assigned in support of landscape operations.

  
  

Minimum Qualifications:

Completion of 9th grade and 2+ years of relevant experience or an equivalent combinationof education and experience pursuant to Fla. Stat. 112.219(6).

Preferred Qualifications:

• 
  

• 3+ years of landscape experience in a commercial or corporate environment, including installation, renovation, or multiphase outdoor project work.

  
  

• Experience operating equipment such as skid steers, stump grinders, chainsaws, compactors, trenchers, or similar tools.

  
  

• Familiarity with identifying plant materials and understanding proper planting techniques.

  
  

• Knowledge of hardscape practices, including concrete repair, paver installation, or sitefurnishing installation.

  
  

• Experience assisting with tree work (urban forestry), such as pruning, removals, or stump grinding.

  
  

• Ability to work in extreme environments and collaborate with individuals from various backgrounds and experiences.

  
  

The most successful candidates may possess the following qualities:

• 
  

• Knowledge of proper maintenance of equipment: Cleaning, preserving finishes, checking fluid levels, and lubricating.

  
  

• Basic computer skills, including email.

  
  

• Basic communication skills in English in order to: Work effectively with customers; Operate and demonstrate the functions of the electronic equipment; Utilize telecommunication devices.

  
  

Health Assessment Required:

The UCF policy requires completion and passing of a physical exam for this position.

Special Instructions to the Applicants:

New hires selected for this position at the University of Central Florida can expect to be offered the base salary amount for the role. Compensation is determined in alignment with UCF's pay structure and internal equity considerations.

Position requires a valid Class E driver's license. This position may involve driving to various locations on and off campus to conduct University business.

Applicant must be authorized to work for any U.S. employer, as sponsorship is not available for this position now or in the future.

Are you ready to unleash YOUR potential?

As a next-generation public research university and Forbes-ranked top employer in Florida, we are a community of thinkers, doers, creators, innovators, healers, and leaders striving to create broader prosperity and help shape a better future. No matter what your role is, when you join Knight Nation, you'll play an integral role at one of the most impactful universities in the country. You'll be met with opportunities to connect and collaborate with talented faculty, staff, and students across 12 colleges and multiple campuses, engaging in impactful work that makes a positive difference. Your time at UCF will provide you with many meaningful opportunities to grow, you'll work alongside talented colleagues on complex projects that will challenge you and help you gain new skills, and you'll have countless rewarding experiences that go well beyond a paycheck.

Working at UCF has its perks!UCF offers:

• 
  

• Benefit packages, including Medical, Dental, Vision, Life Insurance, Flexible Spending, and Employee Assistance Program

  
  

• Paid time off, including annual and sick time off and paid holidays

  
  

• Retirement savings options

  
  

• Employee discounts, including tickets to many Orlando attractions

  
  

• Education assistance

  
  

• And more...For more benefits information, view the UCF Employee Benefits Guide.

  
  

Dive into our Total Rewards Calculator to discover the diverse selection available to you, giving you a glimpse into the benefits that together shape your comprehensive rewards package at UCF.

Unless explicitly stated on the job posting, it is UCF's expectation that an employee of UCF will reside in Florida as of the date the employment begins.

Department

Work Schedule

Type of Appointment

Expected Salary

Job Posting End Date

Veteran's Preference:

Preference will be given to eligible veterans and their eligible spouses in accordance with Chapter 295 of the Florida Statutes. Applicants claiming preference are responsible for providing required documentation by the closing date of the position. For more information on Veterans' Preference, please visit

As a Florida public university, the University of Central Florida makes all application materials and selection procedures available to the public upon request.

UCF is proud to be a smoke-free campus and an E-Verify employer.

If an accommodation due to a disability is needed to apply for this position, please call or email .

For general application or posting questions, please email .

Build a Career That Matters with One of the World's Most Respected Employers!

- - - - - - - - - - - -

Michelin Beyond Road Junction City, KS - AG Track Manufacturing Leader

This opportunity is in Junction City, KS Agricultural Track facility, located between Salina and Manhattan in the heart of Northeastern, KS. With the current expansion we will be one of the best automated and tech savvy facilities in the region, serving the ever-growing agriculture industry. 15 minutes away from Manhattan, home to the K-State Wildcats, there is a mix of downtown life, multiple outdoor hiking and lake activities, great places to eat, and college game day events to attend. Are you looking for an exciting career and not just a job? Come join our growing team

THE OPPORTUNITY

This Engineer will be responsible for completing the Mechanical Engineering portion of projects in support of the Plant Capital Project execution. They will also provide daily Plant Technical support, enabling the Plant to meet its Safety, Market, Productivity, and Quality goals. They will assist management with pre-studies of deployment and development projects in the M.E. field. They will also complete design studies, follow procurement and fabrication of equipment and lead the installation, commissioning and startup of the equipment in an industrial plant environment. For customer projects, manages the design studies for industrial equipment installations that are necessary for the success of the Plant's capital projects. She / he will ensure adherence to the customer's specifications, local regulations, compliance of performance, and costs.

WHAT WILL YOU DO

* Conduct feasibility studies of functional specifications; evaluate solutions against the criteria of cost, landmarks, risks, and functionality.

* Adhere to the quality system and established methods (risk analyses, FMEA, design reviews, quality planning, treatment of non-Conformities, etc.).

* Acquire validation of projects during the installation, start-up and ramp-up of the equipment in collaboration with team members.

* Facilitate procurement, factory acceptance tests, and maintain "as built" folders for assigned material and equipment projects.

* Provide project support, especially during installation. Start-up and ramp up phases, are often "on-site" and "hands on", and several projects include implementation schedules during planning site downtime.

* Create budget estimates and bid packages on assigned projects.

* Provide project documentation: mechanical designs, technical offer, safety risk assessment, quality risk assessments, maintenance & operator training documents and user manuals.

* Lead mechanical contractors or maintenance installation teams during equipment modifications & machine installations through start-up and commissioning.

* Provide project support, especially during installation, start-up and ramp up phases, is often "on-site" and "hands on", and many projects include implementation schedules during holidays and shutdowns.

WHAT WILL YOU BRING

* Bachelor of Science in Mechanical Engineering.

* Strong leadership, communication, organizational, customer service skills, and ability to work in a collaborative team environment.

* Self-motivation with a high degree of integrity and able to perform job duties with minimal direction on a timely basis.

* Ability to successfully lead multiple projects

* Experience with mechanical design standards; OSHA, ASME, ANSI, ISO, etc.

* Proven knowledge of SOLIDWORKS and Microsoft office

* Project Management experience preferred

#LI-RM1

#LI-HIRINGMICHELIN

Ready to Shape the Future of Innovation?

Michelin is building a world-leading manufacturer of life-changing composites and experiences. Pioneering engineered materials for more than 130 years, Michelin is uniquely positioned to make decisive contributions to human progress and a more sustainable world. Drawing on its deep know-how in polymer composite materials, Michelin is constantly innovating to manufacture high-quality tires and components for critical applications in demanding fields as varied as mobility, construction, aeronautics, low-carbon energies and healthcare.

The care placed in its products and deep customer knowledge inspire Michelin to offer the finest experiences. This spans from providing data- and AI-based connected solutions for professional fleets to recommending outstanding restaurants and hotels curated by the MICHELIN Guide.

Why Michelin?

• Career Growth: Personalized development plans, mentorship, and cross-functional opportunities. Unique career paths and opportunities for advancement.

• Inclusive Culture: Thrive in a diverse, supportive environment where your competencies, contributions and behaviors are recognized. Option to join one of our Connected Communities.

• Innovation-Driven: Work on projects that matter-from sustainable materials to digital transformation.

• Community Impact: Be part of a company that does what's right. We use sustainable business practices while balancing the needs of our customers and communities.

Michelin provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, sex (including pregnancy, gender identity, and sexual orientation), parental status, national origin, age, disability, genetic information (including family medical history), political affiliation, military service, or other non-merit-based factors. Consistent with these obligations, Michelin also provides reasonable accommodations to employees and applicants with disabilities and for sincerely held religious beliefs. If you need accommodation for any part of the employment process because of a disability, please contact us at .

This position is not available for immigration sponsorship.

We build the future with people like you. Begin your career with Michelin today!

Position Title: Assistant Electrical Superintendent

Reports To: Electrical Superintendent

Position Summary: The Assistant Electrical Superintendent executes the day-to-day operations within the electrical department as directed by the Electrical Superintendent. Responsible for safety, quality, schedule and budget of all assigned work. Assists in the planning, managing, and execution of electrical projects and repairs in production with applicable departments, personnel, and customers. Assist in the department’s development in trade skills and workmanship. Assist in organizing and managing the primary duties of the Marine Electrician which include the installation, test, and repair or marine cables and equipment, installation and connection of lighting, electrical power, troubleshooting and repair of shipboard and facilities electrical systems. Must be able to read blueprints, drawings, and schematics.

Pacific Shipyards International, LLC Expectations of Employee:

• Is committed to the company values and adheres to all Pacific Shipyards’ policies and procedures
• Perform duties of his/her job and as assigned by Management
• Maintain a positive and respectful attitude and conduct her/himself with integrity and in a polite, professional manner treating customers and co-workers courteously and respectfully
• Communicates regularly with Officers, Managers, & Supervisors about the different divisions and department’s issues
• Consistently be on time for work, meetings, and appointments and deliver work projects by assigned due dates
• Maintain assigned work areas in a clean and orderly fashion
• Maintain and ensure the safety of all assigned equipment
• Perform all duties in conformance to appropriate safety and security standards
• Meet productivity goals and quality standards as set by management
• Ability to handle multiple tasks and balance priorities
• Computer proficiency in Microsoft Office

Essential Duties & Responsibilities:

• Plan layout and installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes
• Connect wires to circuit breakers, transformers, or other components
• Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of the system
• Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as oscilloscopes, ammeters, or test lamps
• Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes
• Prepare sketches or follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes
• Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem
• Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures
• Advise management on whether continued operation of equipment could be hazardous
• Maintain current electrician's license or identification card to meet governmental regulations
• Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes
• Direct or train workers to install, maintain, or repair electrical wiring, equipment, or fixtures
• Repair or replace wiring, equipment, or fixtures, using hand tools or power tools
• Install ground leads and connect power cables to equipment, such as motors
• Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures, using hand tools or power tools
• Perform business management duties, such as maintaining records or files, preparing reports, or ordering supplies or equipment
• Fasten small metal or plastic boxes to walls to house electrical switches or outlets
• Construct or fabricate parts, using hand tools, according to specifications
• Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects
• Provide assistance during emergencies by operating floodlights or generators, placing flares, or driving needed vehicles
• Provide preliminary sketches or cost estimates for materials or services

Education/Training:

• 3 years or more in the Marine Electrical field
• Experience with US Navy Ship repair/NAVSEA regulation is required
• BS Electrical engineering degree
• Heavy Civil construction experience
• PLC and VFD experience A MUST
• Working knowledge of IT as it relates to electrical controls
• Ability to multi-task, prioritize and handle deadlines
• Ability to troubleshoot electrical systems;
• Extensive knowledge of MS Office and AutoCAD
• Ability to use Microsoft Product such as Word, excel, and adobe
• Excellent verbal and written communication skills

Qualification/Requirement:

• Must show proof of your legal right to work in the United States
• This position requires US Citizenship due to security clearance required for base access
• Must be able to successfully obtain a Transportation Worker Identification Credential (TWIC)
• Must be able to successfully obtain a Defense Biometric Identification System (DBIDS) Credential to gain access to federally controlled work sites
• All candidates must submit to and pass a post -offer drug screening and background check before employment begins. Failure to complete any of these steps will result in disqualification
• Valid State of Hawaii REAL ID-Compliant Drivers’ License in good standing, Class 3 or higher or a valid U.S. Passport in addition to a valid Hawaii Driver’s License, if you do not have a REAL ID-Compliant Driver’s License.
• Candidates must have access to reliable transportation to get to work and other job sites on time for the start of shift

This is a unique opportunity to take control of and propel you along your career path. Baker Roofing invests in our employees by empowering success through a structured growth plan and intensive training courses. We value our employees by providing competitive benefits, prioritizing safety, and emphasizing work-life balance.

With more than 20 locations across the Southeast, Baker Roofing Company is an industry leader in providing an outstanding experience in commercial roofing, residential construction, metal fabrication, restoration, and more. We pride ourselves on over 100 years of quality work, investing in our employees, and providing a family-centered culture.

Pay: $30-35/hour

Benefits:

• 7 Paid Holidays
• Medical insurance
• Dental Insurance
• Vision Insurance
• 401K
• Paid Holidays

Cover roofs with TPO, EPDM, PVC, and related materials. May spray roofs, sidings, and walls with material to bind, seal, insulate, or soundproof sections of structures.

• Education: High School/ G.E.D
• Years of Experience: 1-3 years of roofing experience
• Driver's License

• Knowledge of safety techniques and procedures to set up a safety plan including toolbox talks, safety huddles
• Calculate and control labor projections, material storage, and material needs
• Ability to read shop drawings, reproduce manufacturing details, and layout roofs and walls
• Knowledge of how to cut, shape, fit, join, and install edge metal, insulation, ice & water shields, wood, or other construction materials
• Run material inventory
• Knowledge of how to install pipe boots, ridge/hip caps, rake, nail base, valley, eave lock, and ice & water shield
• Knowledge of how to install counter flashing, coping, fascia, gutters, miters, downspouts, roof curbs, flat lock, and thru-wall flashing
• Knowledge of how to install crickets, chimney flashing, curbs, and how to make seaming and horizontal and vertical soldering
• Ability to fulfill: timesheets, shop requisitions, and job reports
• Interpersonal and leadership skills with ability to work on a team and take corrective action when necessary
• Ability to train and supervise the crew and subcontractors as needed in order to meet the quality and production goals
• Meet with GC and customers

• Thoroughly review job file and shop drawing with manager and including the scope of work, materials ordered and delivery schedule, budget for labor productions (man-days), and job site contacts
• Ensure that proper safety and equipment are on the job and used in the proper manner
• Supervise and support crew every day about safety, quality, and labor production
• Monitor and maintain job site cleanliness and daily housekeeping
• Make sure on-site equipment is monitored and maintained, such as oil changes on kettle motors, belts on cutters, etc.
• Prepare and submit daily job reports, field progress problems, technical questions, and timesheets, as directed by manager
• Responsible for overall quality control of each job including: checking for water tightness, mops left on the roof, ensuring the job site is complete and has been cleaned up properly, coordinate punch list and job close out before crew leaves job site for the last time
• Install, repair, or replace single-ply roofing systems, using waterproof sheet materials such as modified plastics, elastomeric, or other asphaltic compositions
• Cut felt, shingles, and strips of flashing, and fit them into angles formed by walls, vents, and intersecting roof surfaces
• Install vapor barriers and/or layers of insulation on the roof decks of flat roofs and seal the seams
• Install partially overlapping layers of material over roof insulation surfaces, determining distance of roofing material overlap using chalk lines, gauges on shingling hatchets, or lines on shingles
• Cover roofs and exterior walls of structures with slate, single-ply systems, asphalt, aluminum, wood, gravel, gypsum, and/or related materials, using brushes, knives, punches, hammers, and other tools.
• Operate vehicles, mechanized devices, or equipment
• Train and coach other employees

• Requires standing up for long periods of time
• Requires use of ladders, scaffolds, and stairways
• Requires ability to climb, lift, balance, walk, and handle materials
• Requires use of abdominal and lower back muscles to support part of the body repeatedly or continuously over time without giving out or fatiguing
• Requires seeing details at close range
• Requires repetitive movement, bending or twisting, kneeling, crouching, stooping or crawling
• Requires ability to stand, walk, lift, and carry items weighing 50 pounds regularly

• Requires working in extremely bright or inadequate lighting conditions, in very hot (above 90 F degrees) or very cold (below 32 F degrees) temperatures, including exposure to sounds and noise levels that are distracting or uncomfortable
• Includes exposure to contaminants, hazardous material, or equipment
• Mistakes are not easily correctable and have serious consequences, therefore safety procedures need to be followed
• Requires exposure to minor burns, cuts, bites, or stings
• Requires exposure to high places or dangerous conditions

The statements herein are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Baker Roofing Company is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, national origin, disability, or protected veteran status. If you need special assistance or accommodation in applying for employment at Baker Roofing Company, please contact our Recruiting department at 919-828-2975 or . EOE Minorities/Females/Disability/Veterans; VEVRAA Federal Contractor

• Principals only. Recruiters, please don't contact this job poster.

Epsilon Systems is seeking a Temporary Electrician II for the Modernization and Engineering division located in Portsmouth, VA. Summary: Performs a variety of complex electrical trade functions such as the installation, maintenance, or repair of electronics and/or electrical equipment for the generation, distribution, or utilization of electric energy onboard U.S. vessels/government installations.

• Reports directly to the Production Manager. Once assigned reports directly to the project Foreman in the performance of his/her responsibilities.
• Performs component and/or system troubleshooting to diagnose the problem and provide most cost-effective recommendation for completing repairs.
• Performs and/or verifies mechanical alignments.
• Ensures control and assumes responsibility for Level-1 material controls in accordance with Epsilon Systems Instructions.
• Performs installation, repair, overhaul or modification in place or in shop to electronic or electro mechanical systems and components (e.g.; controllers, switches, pumps, etc.).
• Assists with the performance of on-site field service for system grooms and checkouts, minor repairs and system configuration validation.
• Prepares and installs equipment or system alterations (e.g.; TEMPALTs, SHIPALTs, ORDALTs, etc.) IAW the directives (i.e.; instructions, drawings, Technical Manuals, MILSPECs, etc.).
• Notifies Foreman of any unsatisfactory condition(s) identified during the production operation (i.e.; repair, modification, etc.).
• Maintains good housekeeping practices; turning off machines when not in use, disposing of waste properly, sweeping the area, etc.
• Strictly adheres to corporate, federal, state and local safety regulations. Ensures that all Epsilon Systems Personnel Protective Equipment (PPE) are worn and that all damaged PPE is discarded.
• Performs installation, repair, overhaul or modification shipboard or in shop to electrical or electro mechanical systems and components.
• Performs component and/or system troubleshooting to diagnose problems.
• Ensures that all requirements and detailed repair procedures and instructions are followed according to the company's work instructions, work packages, management guidance to complete the production operations.
• Works from blueprints, drawings, layouts, or other specifications, inspects and tests electrical systems and equipment to locate and diagnose malfunctions, using visual inspections, testing devices.
• Works standard computations relating to load requirements of wiring or electrical equipment, and uses a variety of electrician's hand tools to measure and test instruments.
• Follows blueprints to determine the location of wiring and equipment and to ensure conformance to shipboard requirements.
• Troubleshoots motor controllers, control panels, and power distribution panels.
• Performs Electrical Testing using multimeter, miggers, ampmeters, load banks.
• Assembles multi-pin connectors and fiber optic connections.
• Installs and seats brushes for AC and DC motors / generators.
• Completes inspection and resurfacing of commutators and slip rings.
• Performs work outside of trade if necessary.

• High school diploma or equivalent or vocational training.
• At least 5 years' experience as a marine electrician.
• Understands and is familiar with NAVSEA Standard items.
• Follows NAVSEA Standard Items.
• Experienced in the performance of Energized Circuit work. Basic knowledge of AC and DC electrical theory, power generation, control and distribution.
• Qualified in a minimum two of the following processes copper multi-pin connector assembly or repair. Fiber Optic connector assembly, repair. and testing/ troubleshooting. Soldering of electrical/Electronic components. Electrical design, diagraming. ESD handling and workmanship experience.
• Possess 32 hours classroom training plus 40 hours on-the-job training in Cat5/6, Coax, Triax and Multi-pin connector fabrication and inspection, qualified to MIL-STD-2003-5B (SH)
• Communicates effectively, work independently or in a group.
• Ability to do basic math, i.e. add, subtract, divide and multiply.
• Ability to read, write, speak, and comprehend English.
• Ability to obtain access to military and government installations worldwide.
• Ability to travel required.

• Requires walking, reaching, sitting and concentration in the presence of occasional and loud noises.
• Able to move in narrow and restricted passageways, up/down steep and narrow ladders or stairways, and up and down antenna masts/yardarms (onboard ships).
• Able to lift, carry and move objects up to 50 lbs in weight.
• Must have manual and finger dexterity; able to grasp, manipulate, assemble small objects.
• Able to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.
• Able to perceive and distinguish normal range of colors.
• May be required to wear personal protective equipment (PPE) including but not limited to: hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, safety vests, gloves and steel-toe boots.

Epsilon Systems Solutions, Inc. is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.

Remote

James Hardie is the industry leader in exterior home and outdoor living solutions, with a portfolio that includes fiber cement, fiber gypsum, composite and PVC decking and railing products. Our family of trusted brands includes Hardie®, TimberTech®, AZEK® Exteriors, Versatex®, fermacell®, and StruXure®.

With over 8,000 employees and our U.S. operating entities headquartered in Chicago, we boast 31 operating sites, 6 recycling facilities, and 6 research and development centers globally. Powered by a dynamic workforce, we’re united by our purpose of Building a Better Future for All™ through sustainable innovation, a Zero Harm culture, and a commitment to empowering our people and communities.

For more information, visit : Remote from Birmingham or Huntsville, Alabama

The Technical Sales Manager reports to the Regional Sales Leader (RSL) or the Director of Sales in their respective region. The Technical Sales Manager will work as part of a broader team that will help enable customer retention through effective account management. This role’s account management focus is in targeting the influential install companies in their respective region. In partnership with Territory Sales Managers, this role’s main goal is to drive value in providing guidance in installation practices to current sales account base. This role also closely partners with the Business Development Manager and Leaders in ensuring installation bottlenecks do not become a barrier to sales conversions.

What You’ll Do:

• Maintain key influential identified install companies in targeted geographies and defend our business with them
• Target install companies within region to identify growth opportunities and partner appropriately with internal stakeholders to gain their business
• Support customers as they move to James Hardie by eliminating barriers to conversion & creating a positive customer experience through the transition
• Utilize CRM tools to drive informed decision that enable additional volume growth year over year
• Assist Territory Sales Reps and Business Development Manager and team in gaining additional volume growth year over year
• Executes segmentation to evaluate and assess the market & lead all aspects of the customer sales process, while leveraging other resources to assist in solution development or implementation as necessary.
• Willingness and ability to cultivate relationships, grow networks, nurture leads, and passion to identify targets
• Be the subject matter expert in all technical install practices of our product offerings
• Manages and holds themselves accountable to a priority based schedule with prospective customers
• Flexibility to identify and attend key activities within assigned territory
• High level of networking and engagement across account base
• Ability to influence key stakeholders to be advocates for JH
• Develop a solid understanding of company products and installation practices of each, as well as, customer programs and benefits
• Capable of analyzing and interpreting data to drive decision making in their market
• Able to host, lead and present in front of large audiences
• Passion for their company and personal success to meet or exceed goals
• Bilingual with English and Spanish would be a nice to have

What You’ll Bring:

• 3+ years of sales experience in a high touch sales environment
• High level of organization, discipline, and self-structure
• Able to convey construction expertise and knowledge at job sites
• Strong sales mentality and understanding of sales process
• Ability to effectively build relationships at all levels of an organization.
• Ability to influence key stakeholders to become advocates for James Hardie
• Travel 10-15%
• Valid driver’s license required
• Bachelor's degree preferred, must be from an accredited institution

The position responsibilities outlined above are in no way to be construed as all encompassing. Other duties, responsibilities, and qualifications may be required and/or assigned as necessary.

What You’ll Receive:

• Compensation: competitive salary and bonus eligibility
• Insurance: day-one health coverage medical, dental, vision, life insurance
• Paid Time Off: vacation and company holidays
• Retirement: 401(k) with 6% match
• Investments: Employee Stock Purchase plan (ESP)
• Work-Life Balance: parental leave, wellness programs
• Purpose. Impact. Community: Sustainability Initiatives | James Hardie
• More: Click here to learn more about our benefits

Build a Better Future for All - Apply now!

James Hardie Building Products Inc. is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, gender, sex, age, national origin, religion, sexual orientation, gender identity/expression, genetic information, veteran's status, marital status, pregnancy, disability, or any other basis protected by law.

James Hardie will comply with any applicable state and local laws regarding employee leave benefits, including, but not limited to providing time off pursuant to the Colorado Healthy Families and Workplaces Act, in accordance with its plans and policies.

The position responsibilities outlined above are in no way to be construed as all encompassing. Other duties, responsibilities, and qualifications may be required and/or assigned as necessary.

Sr Mechanical Superintendent (Data Center Construction)

Weeks Group is a leading data center Owner’s Representative & Project Manager consulting firm with decades of experience overcoming complex mission critical challenges globally. As a women-owned business, we excel in solving tough problems, ensuring safe, timely, on budget delivery. We solve the hardest problems in the data center construction industry.

Our Values

We Answer the Call

Integrity • Honesty • Trust • Nimbleness

We Don’t Take No for an Answer

Persistence • Determination • Accountability

We Solve Problems

Especially on complex, high-intensity projects

We Expect the Best from Each Other

Teamwork • Communication • Ownership

We BTFM

Innovative thinking with zero tolerance for mediocrity

Role Summary

The Sr Mechanical Superintendent leads field execution of mechanical scope on mission-critical data center projects. This role owns day-to-day onsite leadership for mechanical activities: safety, subcontractor coordination, installation quality, schedule adherence, testing readiness, and turnover support. The Mechanical Superintendent ensures systems are installed correctly, documented properly, and turned over in a manner that supports successful startup, commissioning, and operations.

This is a hands-on, high-accountability role for a leader who can drive production, coordinate seamlessly with electrical and CSA teams, and maintain clean build discipline in critical environments.

Key Responsibilities

Safety & Field Leadership (Primary)

• Lead mechanical field operations while reinforcing a zero-incident culture.
• Ensure subcontractors comply with site safety plans, permits, JSAs/AHAs, LOTO requirements, hot work controls, and housekeeping standards.
• Conduct regular safety walks; correct unsafe conditions immediately and escalate when necessary.

Mechanical Scope Execution (Primary)

Lead and coordinate installation for mechanical systems, including (project-dependent):

• Chilled water / condenser water piping and equipment
• CRAH/CRACs, AHUs, MAUs, exhaust systems
• Cooling towers / fluid coolers / pumps / heat exchangers
• Hydronic specialties, valves, strainers, expansion tanks, insulation
• Mechanical supports, housekeeping pads, curb systems, equipment rigging coordination
• Fire protection interface coordination (as required)
• BAS/BMS coordination for controls and integration readiness
• Equipment access, service clearances, and maintainability requirements

Planning, Sequencing & Schedule Control (Primary)

• Own mechanical short-interval planning (daily/weekly) and support pull planning with measurable commitments.
• Coordinate mechanical rough-in, overhead work, and equipment setting paths with CSA/architectural progress and electrical busway/gear installation.
• Identify constraints early (design gaps, material delays, access conflicts) and drive resolution to maintain schedule.
• Track manpower, productivity, and area readiness; communicate impacts and recovery plans.

Quality Control & Clean Build Discipline (Primary)

• Enforce mechanical installation standards, tolerances, and manufacturer requirements.
• Drive quality walks and manage deficiency/punch lists to closure.
• Protect critical spaces: dust control, cleanliness, protection of finishes/equipment, and strict housekeeping expectations.
• Ensure labeling, tagging, and documentation support turnover and commissioning.

Coordination & Communication (Primary)

• Lead/participate in key coordination meetings: foreman huddles, subcontractor coordination, BIM/VDC coordination, look-ahead planning, and progress walks.
• Coordinate with commissioning agents (CxA), controls vendors, and TAB contractors to ensure readiness and logical execution.
• Communicate field issues clearly with options, impacts, and recommended solutions.

Procurement & Long-Lead Tracking (Supporting)

• Track and support procurement status for mechanical long-lead items (CRAH/CRAC, pumps, towers, valves packages, specialty equipment).
• Coordinate delivery, laydown, rigging plans, and installation readiness with the project team and vendors.

Testing, Commissioning Readiness & Turnover (Primary/Supporting)

• Drive mechanical completion by system/area to support startup and commissioning.
• Coordinate TAB and flushing/cleaning requirements (hydronic cleanliness, chemical treatment as required).
• Ensure prefunctional checklists, test results, and installation sign-offs are complete and filed.
• Support turnover requirements: as-builts, O&Ms, training coordination, warranties, spare parts, and final punch closure.

Knowledge, Skills & Abilities

• Strong mechanical construction background with superintendent-level leadership experience.
• Mission-critical/data center experience strongly preferred; other high-spec industrial or healthcare experience considered.
• Deep understanding of mechanical means and methods, sequencing, and constructability.
• Ability to read drawings/specs and enforce quality with subcontractors.
• Working knowledge of BAS/BMS coordination and commissioning flow (prefunctional → functional → integrated testing).
• Strong communication and conflict resolution skills; calm under pressure.
• Comfortable with field technology (Procore/ACC, Bluebeam, MS Office) and daily reporting.
• Understanding of CPM schedule logic and short-interval planning.

Experience & Education (Typical)

• 7+ years in commercial/industrial mechanical construction, including lead superintendent/foreman responsibility.
• Data center / mission-critical experience preferred.
• OSHA 30 preferred (or willingness to obtain).

Compensation & Benefits

• Competitive base salary based on experience and project scope.
• Performance-based bonus potential.
• Fully paid comprehensive benefits (medical, dental, vision) for you and your family.
• 401(k) Safe Harbor plan.
• Paid time off (PTO).
• Opportunity to work on technically complex data center projects in a high-performance environment focused on long-term growth and leadership development.