Codex Install Jobs in Usa

Lead Installer and Trainer

Location: On-Site | Las Vegas, NV

Work Schedule: Full-time, Monday - Friday, daytime hours. Schedule may adjust based on installation demands and travel requirements.

Travel Requirements: Occasional regional travel as projects require.Flexibility to work extended hours during active installation cycles.

A rapidly growing residential vertical transportation company is expanding its Nevada operations and seeking a Lead Installer and Trainer to play a critical role in driving installation excellence and field leadership. This is a high-impact opportunity for a seasoned elevator installation professional who takes pride in craftsmanship, safety, and mentoring the next generation of technicians.

In this role, you will lead full-cycle residential elevator installations, oversee final quality inspections, and develop apprentice installers into future crew leads. If you thrive in a hands-on environment, value precision, and want to shape the standard of excellence across a growing region, this is your chance to step into a visible leadership position.

Key Responsibilities

Installation Leadership

• Lead residential elevator installations from layout through final commissioning.
• Install rails, drive systems, hydraulic components, platforms, cab interiors, hoistway doors, and associated mechanical and electrical systems.
• Conduct final inspections and approve completed installations prior to turnover.
• Maintain clean, organized, and safety-focused jobsites.

Training and Workforce Development

• Mentor and train apprentice installers in technical procedures, code compliance, jobsite standards, and professional conduct.
• Develop structured, hands-on training approaches to prepare junior team members for future leadership roles.
• Reinforce a culture of accountability, safety, and craftsmanship.

Safety and Code Compliance

• Ensure all installations meet applicable safety standards and building codes.
• Proactively identify and mitigate jobsite risks.
• Maintain compliance with applicable elevator code requirements and regional regulations.

Troubleshooting and Technical Support

• Diagnose and resolve issues related to motors, pumps, wiring, safety circuits, switches, and control systems.
• Respond to service needs related to completed installations when necessary.
• Accurately document inspections, repairs, and technical findings.

Communication and Coordination

• Serve as the primary field contact for contractors, homeowners, scheduling teams, and operations leadership.
• Provide consistent job updates and escalate issues appropriately.
• Represent the company with professionalism on every project.

Qualifications

• Minimum 3 years or approximately 6,000 hours of residential elevator installation experience.
• Ability to read blueprints, wiring diagrams, and manufacturer documentation.
• Strong mechanical and electrical troubleshooting skills.
• Proficiency with hand tools, power tools, and diagnostic equipment.
• Demonstrated ability to train, mentor, and lead field personnel.
• High school diploma or GED required.
• Valid driver’s license with acceptable driving record.
• Ability to lift up to 75 pounds and work at heights, on ladders, and in confined spaces.
• Successful completion of background screening and drug testing.

Preferred Experience

• Previous experience in a lead installer or training capacity.
• Residential elevator system experience strongly preferred.
• Strong organizational skills and pride in jobsite presentation.

About Blue Signal:

Blue Signal is an award-winning, executive search firm specializing in various specialties. Our recruiters have a proven track record of placing top-tier talent across industry verticals, with deep expertise in numerous professional services. Learn more at /46Gs4yS

Must haves:

• Electrical apprenticeship or formal training in electrical installation techniques.
• Demonstrated ability to read and interpret drawings.
• Possesses working knowledge of local codes as it applies to controls.
• Experienced in scope determination of installation materials. Able to work independently.
• Four years’ experience directly with controls installations.

Day to day:

Under general supervision, performs installation and checkout on a variety of systems utilizing codes, company procedures, engineering drawings and personal analysis. Works with electrical contractors as required. Develops a positive interface with the customer to ensure confidence and satisfaction with the system installation.

• Installs raceways, cables and wiring to meet local or national codes, standards and customer system requirements. Lays out electrical controls installation to provide lowest total installed cost.
• Mounts and terminates controls equipment as needed.
• May assist sales with electrical estimates, including walking retrofit projects.
• Determines and validates final termination points to equipment interfaced with the installed system (i.e. chillers, boilers, roof top units, etc.).
• Checks out wiring and terminations of field-installed equipment with test instruments as needed (i.e. volt meters, hand held testers, etc.).
• Keeps management informed of job needs, progress and issues.
• Completes paperwork, including but not limited to time sheets, expense reports, and on-site documentation. Provides feedback to Engineering on changes and keeps as-built drawings current.
• Resolve job site conflicts regarding installation issues or escalates concerns to management as required.
• Communicates with the customer as necessary upon arrival and before leaving the work site.
• Adheres to safety programs and policies.
• Performs other related duties as assigned.

Lead Installation Technician – AVL Systems

Location: MN (Travel Required)

Employment Type: Full-Time

Our client is seeking a Lead Installation Technician to oversee the installation of professional audio, video, and theatrical lighting systems in performance venues, commercial facilities, and houses of worship. This role combines hands-on technical work with crew leadership, ensuring installations are completed safely, efficiently, and to industry standards.

Responsibilities

• Lead installation of AVL systems including audio, video, and theatrical lighting equipment
• Direct and coordinate small installation crews (2–5 technicians) onsite
• Install, troubleshoot, and maintain AVL systems using industry best practices
• Read and interpret CAD drawings and construction documents
• Coordinate with project managers, designers, electricians, and general contractors
• Document installation progress and maintain quality standards
• Provide basic client training and system handoff support
• Prepare tools, equipment, and installation materials for job sites
• Maintain organized shop and installation areas
• Support occasional live event or production work as needed

Qualifications

• 3–7 years of AVL installation experience
• Ability to read schematics and construction drawings
• Experience with cable fabrication, rack assembly, termination, and system installation
• General construction knowledge including mounting equipment and working within finished spaces
• Strong communication skills and ability to interact with clients onsite
• Working knowledge of theatrical rigging preferred
• CTS certification or Power Limited Technician license preferred
• Ability to lift up to 75 lbs., work at heights, and travel for projects

Benefits

• Health, dental, retirement, life, and disability insurance
• Company vehicle provided for work use
• Competitive hourly compensation based on experience

About Theater Outsource

is the entertainment industry’s dedicated recruiting partner — connecting top-tier talent with the companies that bring stages, venues, and experiences to life. From lighting and rigging to AV, scenic, and systems integration, we specialize exclusively in entertainment technology.

We work with manufacturers, integrators, and production companies nationwide — delivering permanent placements with no upfront cost and a 90-day guarantee.

We deliver the Talent.

Job Title: Field Superintendent New Installations

Location: Charlotte, NC, United States

Job ID: 87246

We Elevate... Quality of urban life

Our elevators, escalators, and moving walks safely transport more than two billion of us up and down buildings and across transportation hubs every day. As part of the Schindler team, you’ll discover meaningful work that enhances quality of life for communities, and contribute to making places more accessible, inclusive, and sustainable for all. By joining us, you don’t just become part of our success story; you help shape the future and continue our rich legacy that started back in 1874.

Join us as a Field Superintendent New Installations

Your main responsibilities

PRIMARY FUNCTION / POSITION OVERVIEW:

Field Supt is responsible of the repair of all assigned units so as to conform to customer and Company requirements as related to quality improvement, safety, cost improvement and customer satisfaction in support of Region objectives. Is also responsible for employee selection, training and safety for all assigned projects.

ESSENTIAL FUNCTIONS:

The qualified candidate must be a high-energy self-starter with a strong work ethic. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. As a Schindler NI Field Superintendent, the candidate’s role will include providing technical solutions, ensuring workplace safety, supervising technicians and job site activity, and supporting new installation and modernization sales. The selected candidate must be an expert at fulfilling customer requirements and maximizing profitability; excellent communication, financial acumen, business development, and management skills will all be critical to success in this role. The NI Field Superintendent must also have the necessary skills and experience to handle customer concerns, adjust manpower levels according to business needs, and to teach employees the Company’s quality, productivity and safety methodology.

Additional responsibilities include:

• Build a team environment by leading field technicians

• Manage training and development of field technicians on established processes, safety, tools and standards through daily communication and job-site visitation.

• Foster excellent communication among team members while maintaining good working relationships with the local union

• Ensure that each installation project meets Company quality and safety standards, as well as all contract requirements.

• Monitor project installation progress completion and drive installation efficiency through daily job-site visitation for progress reporting.

• Perform project installation surveys which includes walking multiple flights of stairs for accessing motor rooms, pits and shaftways.

• Perform daily job-site readiness walkthroughs with general contractors prior to delivery of equipment and project installation commencement.

• Implement customer and Company requirements for quality, performance reliability and passenger safety for new installation projects.

• Support the local sales and project management team in estimating new installation bids, attending customer job progress meetings, as well as investigating and resolving customer complaints.

• Develop a spirit of teamwork and dedication to quality among all staff and field employees

• Participate in Company professional development programs to enhance working knowledge of Elevator Company products, services and procedures

What you bring

Bachelor’s degree preferred OR 3 years of technical experience in the elevator industry or related field.

• Ability to effectively manage and resolve sensitive employee relations issues

• Solid problem solving and proven negotiating skills, high sense of urgency, strong communication and interpersonal skills

• Excellent PC skills

What’s in it for you?

Fully vested 401k match, up to 7% of total eligible compensation.

Competitive Medical, Dental and Vision Plans - Effective from first day of hire.

3 weeks’ vacation which increases with tenure, 7 sick days, 3 floating holidays and 8 Company Observed Holidays.

Tuition Reimbursement - Eligible after 6 months of service.

Parental Leave – 100% base pay for 6 consecutive weeks within first year of a child’s birth or adoption.

A wide range of development opportunities to boost your professional and leadership growth.

We Elevate… Your Career

Become part of our team, help us enhance quality of life and drive innovation while raising the bar for safety and sustainability. We value your diverse skills and perspectives as together we shape the sustainable cities of today and tomorrow.

Don’t meet every single requirement? If you’re excited about this role but your experience doesn’t align perfectly with the qualifications listed in the job description, we encourage you to apply anyway! You may just be the right candidate for this or other roles!

Are you ready to embark on a new journey? Join #TeamSchindler! Our Core Values:

Safety: Uphold the highest safety standards for all.

Integrity and Trust: Foster honest, ethical relationships.

Create Value for the Customer: Deliver innovative, reliable solutions.

Quality: Ensure excellence in every product and service.

Commitment to People Development: Nurture our people, they are the heart of our success.

Discover more on our career website.

At Schindler Group we value inclusion and diversity, and practice equity to create equal opportunities for all. We endeavor that all qualified applicants will receive consideration for employment without regard to age, race, ethnic background, color, religious affiliation, union affiliation, gender, gender identity, sexual orientation, marital status, national origin, nationality, genetics and health, disability or veteran status.

Any unsolicited application from Recruitment Agencies is deemed to be rejected and does not constitute in any manner an offer from a Recruitment Agency.

About the Organization
RoadSafe Traffic Systems is the largest national provider of traffic safety products and services in the United States. RoadSafe serves customers in all 48 contiguous states through its network of more than 60+ branch locations. At RoadSafe, we offer competitive pay, growth potential, and an excellent benefits package, including medical, dental, vision, and 401(k) plans for those who qualify. We recognize and value diversity and are committed to creating an inclusive environment for all employees.

Position Summary:
The DOT Sign Installer is responsible for installing signs on state highways and other roadways, working either independently or as part of a sign installation control crew. This role includes setting up and maintaining safe work zones as required to ensure the safety of both the crew and the public.

Essential Functions:

• Install, remove, and maintain DOT roadway signs, posts, and related hardware.
• Ensure all installations meet DOT, MUTCD, and company safety standards.
• Assemble and install sign posts using a jackhammer and other necessary tools.
• Read and interpret blueprints, work orders, site plans, and installation specifications to ensure accurate installation.
• Operate hand and power tools, jack hammers, drills, and basic construction equipment.
• Drive the sign installation vehicle with a trailer to and from project sites and operate safely on work sites.
• Load, transport, and unload signs, posts, and materials to and from job sites
• Perform routine inspections and repairs of existing signage.
• Follow all safety protocols, including PPE and traffic control procedures.
• Maintain a clean and safe job site at all times.
• Communicate effectively with supervisors and crew members.

Education, Experience, and Skills Required:

• Previous experience installing DOT or roadway signage in sign installation or a similar trade is required; certification from ATSSA as a Worksite Traffic Technician or Supervisor is preferred.
• Must possess a valid driver's license and meet federal DOT requirements; a CDL Class B is preferred.
• Working knowledge of DOT and MUTCD standards.
• Experience using construction tools and equipment.
• Ability to work outdoors in varying weather conditions.
• Ability to understand and follow directions as provided by supervisors and project leads.
• Capability to lift and carry a minimum of 50 pounds to handle materials and equipment.

EOE Statement
RoadSafe is an Equal Opportunity Employer/including Disabled/Veterans

This position requires the ability to travel out of town as needed for various job sites.

1. Must be fully qualified and capable of working directly with project management to understand and evaluate scheduled electrical work needed to complete projects in a timely manner.
2. Must be capable of performing all duties associated with the crew lead position and in addition. 
3. Must be able to self-prepare for all scopes of electrical work needed by evaluating pictures from site assessment and communicating directly with the project management and design team about any necessary changes or improvements to the electrical plan set. These changes must be documented and sent to the project management team. 
4. Must maintain tools and materials needed to “adapt and overcome” any challenges in the field including utility shutdowns. 
5. Must be capable of communicating at a high level with city inspectors. 
6. Must maintain a 90% or higher pass rate on all electrical equipment wall installations and maintain less than 10% of service calls generated by installation-related quality issues. 
7. Must be capable of cross-training and crew development when assigned to supervise and support solar installation crews, allowing roof crew leads to self-perform installations while maintaining consistent quality by performing and documenting (pictures) quality control checks at specific points during the installation process. 
8. Must be capable of supervising the crew while the electrical apprentice ( roof lead or other designated person by management) gets to experience electrical wall installation and service upgrades. 
9. Must have required personal tools of the trade, see “minimum required personal tools of the trade”.
10. During the first 90 days you will be required to learn how to install Tesla Powerwall coupled with Enphase solar systems. 
11. We will be looking to you to run your own crew with a helper installing power walls and solar systems. By the end of the 90 days, you will be required to take a proficiency test. This test will include you installing a complete battery and solar system without the help of the lead electrician at Good Faith Energy. 
12. You must pass this test to be a lead electrician for Good Faith Energy.
13. We will provide you with all the on-the-job training as well as classroom materials to advance your knowledge of the systems you will be installing.
14. Attends all meetings and conference calls.
15. Performs consistently with company core values
16. Maintains strict confidentiality.
17. Provides excellent customer service, for both internal and external customers.
18. Follows all OSHA and other safety guidelines. 
19. Actively demonstrates teamwork at all times.
20. Adheres to company safety standards at all times, such that no serious (requiring medical attention) injury occurred during the prior 12-month period.
21. Follows other policies and procedures such that there are no verbal or written warnings during the evaluation period.

Introduction:

We are a Privately-Owned Solar Services firm, focusing exclusively on the development of industry-leading solutions. We develop, design, and sell new products that are highly efficient and custom installation solutions that enhance the overall adoption of solar.

The Technical Support Specialist I provides technical support for customers, installers, and internal teams related to solar racking system design and installation. This role focuses on learning products, processes, and field practices while supporting commercial and utility scale ground mount solar projects under the guidance of senior team members.

The position assists with technical inquiries, documentation, and project support while developing core knowledge of site conditions, environmental loads, and installation constraints.

Key Responsibilities

Technical & Customer Support

• Assist in responding to customer and internal technical inquiries related to solar racking systems and installation methods.

• Support troubleshooting of common installation and constructability questions under supervision.

• Escalate complex or project specific issues to senior technical staff or Engineering as required.

Design & Documentation Support

• Review and interpret basic engineering drawings, layouts, and installation manuals with guidance.

• Assist in confirming product compatibility based on general site conditions and documented standards.

• Support maintenance of technical documentation, FAQs, and internal knowledge bases.

Field & Installation Awareness

• Learn standard installation practices and common field challenges for ground mount racking systems.

• Review site photos and installer feedback to help identify potential concerns related to terrain or soil conditions.

• Participate in site visits, training sessions, or inspections for learning purposes as needed.

Systems & Process

• Enter and maintain accurate technical records in CRM and document control systems.

• Track support requests and follow established workflows and SOPs.

• Develop familiarity with internal tools, processes, and cross functional communication.

Required Skills & Qualifications

• 0–2 years of experience in solar, construction, engineering support, or a related technical field (internships acceptable).

• Basic understanding of solar PV systems and ground mount racking concepts.

• Ability to read and understand technical drawings at a foundational level.

• Awareness of environmental factors affecting installations (soil conditions, wind, snow, corrosion).

• Proficiency with Microsoft Office (Excel, Word, Outlook, Teams).

• Strong willingness to learn technical products, standards, and processes.

• Strong communication skills and attention to detail.

• Ability to work collaboratively in a team based environment.

Preferred Skills & Qualifications

• Exposure to solar installation, field support, or construction environments.

• Coursework or degree in Engineering, Construction Management, Renewable Energy, or related field.

• Basic familiarity with CRM systems or technical documentation tools.

• Interest in pursuing NABCEP or other relevant certifications.

Our Core Values:

We want a problem solver to interact ambitiously with our business and not just accomplish a task.

The ideal individual will align well with our Core Values:

o Trust

o Excellence

o Accountability

o Collaboration

o Service

o Innovation

• Installation includes mounting wiring connecting testing configuring and programming instruments and devices.
• Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center.
• Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc.
• Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities.
• Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets.
• Ensures regulatory and compliance standards are met.

• Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.

• Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR
• A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems.
• Ability to lead project teams, assume project supervisor role and develop action plans.
• Knowledge of Natural Gas and Electric Driven Gas Compressors.
• Knowledge of Gas and Fire Detection Systems
• Knowledge of Emergency Shut Down (ESD) Systems.

• Ability to interpret control system software for the purpose of diagnostic troubleshooting.
• Ability to pass electrical, electronic, and digital equipment troubleshooting tests.
• Ability to troubleshoot electrical, electronic, and pneumatic equipment.
• Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams.
• Ability to define specifications and requisition instrumentation and control equipment.
• Ability to define problems, collect data and draw conclusions.
• Ability to work independently and as a team member.
• Ability to communicate effectively and develop rapport.
• Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.)
• Ability to operate personal computer.
• Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems
• Knowledge of electric driven compressors may be required.
• Knowledge of electrical and electronic theory and principles
• Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same.
• Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS)
• Knowledge of Variable Frequency Drives (VFD)
• Knowledge of Human Machine Interface (HMI)
• Knowledge of Ethernet Communications Equipment
• Knowledge of Valves and Positioners
• Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards
• Knowledge of applicable regulatory requirements

• Knowledge of electronic, radio, digital, and remote-control theory.
• Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.)
• Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain.
• Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints.
• Ability to prepare technical reports and repair and maintenance records.
• Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations.
• Ability to directs and participates in installation of telecommunications equipment.
• Ability to interpret and implement gas measurement and SCADA device installation specifications.
• Ability to performs design programming installation and operation of electronic gas measurement and control systems.
• Inspects and tests facilities and equipment to identify malfunctions.
• Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment.
• Ensures installations and equipment comply with regulations.
• Ability to supervise MC&C projects.
• Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities

• Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.)

• Electronics & Communications Engineering

• ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months)

• Contribute to a team-centric work environment based on mutual respect and integrity
• Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers

Compensation details: 32.26-46.39

PIa35bdf77f43e-37344-40004115

Description

Key job responsibilities Partner with cable vendors to install, inspect and troubleshoot cabling Installation and maintenance of copper and fiber cable infrastructure Install, test and troubleshoot fiber optic and copper cabling, including patch panels and patch cords
Ensure that the Data Center and vendor installations comply with all installation practices
Report current status via ticketing system, status reports, email and slack
Manage work and priorities through ticketing system and workflows to complete customer requests and projects
Maintain accurate records and document problems and processes to successfully draft and execute changes within data centers
Exhibit quality workmanship on all work and maintain site cleanliness
Work with a partner to move integrated enterprise equipment from loading docks into planned positions
Manage, check and coordinate all materials to be delivered to site daily
Carry cell phone for communication, information, and emergencies
Up to 50% travel within geographical work area may be required; some travel outside traditional work area may be requested.

Infrastructure Delivery Install Technician. Our Infrastructure team is responsible for day to day installation of servers and network equipment, structured cabling, project work and capacity management. This technician will also be involved with installation of structured cabling, management of infrastructure inventory levels, physical installation of network and server racks and/or devices.

This position requires the successful candidate report to a site location. You will work in a dynamic environment to drive the stability and sustainability of our next-generation networks and assist in the development of innovative ways to automate and scale our network. You will launch cutting edge server technologies and solve diverse networking impairments. You will quickly and accurately assess a wide range of infrastructure issues, which requires a good understanding of computers, servers, switches and various networking devices from both a hardware and software perspective and a demonstrated willingness to learn and apply new technology. To be successful in this role you should possess technical aptitude, written and oral communications skills and the ability to deal effectively with people in a wide variety of situations. In addition, you must possess strong analytical skills with demonstrated problem solving ability. You will be able to leverage your experience exercising high levels of initiative, judgment, and diplomacy.

Experience Level

Entry Level

This is a Contract position based out of New Carlisle, IN.

The pay range for this position is $22.00 - $22.00/hr.

Eligibility requirements apply to some benefits and may depend on your job
classification and length of employment. Benefits are subject to change and may be
subject to specific elections, plan, or program terms. If eligible, the benefits
available for this temporary role may include the following:

• Medical, dental & vision
• Critical Illness, Accident, and Hospital
• 401(k) Retirement Plan – Pre-tax and Roth post-tax contributions available
• Life Insurance (Voluntary Life & AD&D for the employee and dependents)
• Short and long-term disability
• Health Spending Account (HSA)
• Transportation benefits
• Employee Assistance Program
• Time Off/Leave (PTO, Vacation or Sick Leave)

This is a fully onsite position in New Carlisle,IN.

This position is anticipated to close on Mar 20, 2026.

We're partners in transformation. We help clients activate ideas and solutions to take advantage of a new world of opportunity. We are a team of 80,000 strong, working with over 6,000 clients, including 80% of the Fortune 500, across North America, Europe and Asia. As an industry leader in Full-Stack Technology Services, Talent Services, and real-world application, we work with progressive leaders to drive change. That's the power of true partnership. TEKsystems is an Allegis Group company.

The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

We’re a leading provider of business and technology services. We accelerate business transformation for our customers. Our expertise in strategy, design, execution and operations unlocks business value through a range of solutions. We’re a team of 80,000 strong, working with over 6,000 customers, including 80% of the Fortune 500 across North America, Europe and Asia, who partner with us for our scale, full-stack capabilities and speed. We’re strategic thinkers, hands-on collaborators, helping customers capitalize on change and master the momentum of technology. We’re building tomorrow by delivering business outcomes and making positive impacts in our global communities. TEKsystems and TEKsystems Global Services are Allegis Group companies. Learn more at .

The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.