Clean Remote Setup Jobs Remote Jobs in Usa

Seeking an experienced Setup Cold Heading Technician to support production within a high-volume metal forming environment. This role focuses on performing machine setups, tooling changes, and process adjustments on cold heading equipment to ensure parts are produced efficiently and meet quality standards.

The technician will play a key role in maintaining production flow by preparing machines for new jobs, resolving equipment issues, and ensuring finished components meet engineering specifications. This position requires hands-on experience with cold heading equipment, strong mechanical troubleshooting ability, and a commitment to safety and continuous improvement.

Responsibilities

• Perform complete machine setups and changeovers on multi-die cold heading equipment.
• Install, align, and adjust tooling including dies, punches, knockouts, and cutoff components.
• Configure feed systems, timing mechanisms, and forming stations for optimal production.
• Conduct first-piece inspections and verify part quality prior to full production runs.
• Interpret blueprints, job instructions, and technical drawings to ensure proper machine configuration.
• Monitor production output and make process adjustments to maintain dimensional accuracy and quality standards.
• Troubleshoot machine issues such as misfeeds, alignment problems, tooling failures, and dimensional variation.
• Inspect tooling for wear or damage and coordinate repairs or replacements when necessary.
• Use precision measuring instruments including micrometers, calipers, gauges, and optical measuring tools.
• Record setup parameters, inspection data, and production information as required.
• Follow established quality standards and manufacturing procedures.
• Maintain a clean, organized, and safe work environment while following all company safety policies.
• Perform lockout/tagout procedures when conducting setups or machine maintenance.
• Support process improvements aimed at reducing scrap, improving efficiency, and increasing production reliability.
• Communicate effectively with production, quality, and tooling teams to resolve manufacturing challenges.

Qualifications

• High school diploma or GED required.
• 2–5 years of experience working with cold heading equipment or similar metal forming machinery.
• Experience performing machine setups and tooling changes in a manufacturing environment.
• Familiarity with multi-die cold heading machines (National, Sacma, Hatebur, or similar equipment).
• Ability to read and interpret engineering drawings, blueprints, and technical documentation.
• Proficiency using precision measuring instruments such as micrometers, calipers, and thread gauges.
• Strong mechanical troubleshooting and problem-solving abilities.
• Basic computer skills and familiarity with ERP systems and Microsoft Office tools.
• Ability to follow written and verbal instructions and communicate effectively with team members and auditors.
• Strong attention to detail with a focus on product quality and safety.
• Ability to work independently while maintaining productivity and accuracy.

What We Offer:

Competitive hourly compensation + OT

medical, dental, vision insurance

401k plan

PTO + holidays

Relocation support for candidates moving to Minnesota

• Set up and operate CNC machines, including Hermle, Mikron, HAAS, Doosan, and Grob technology.
• Utilize Fanuc controls and make minor program edits at the machine.
• Interpret mechanical blueprints, parts lists, specifications, and client requirements.
• Perform setups using probes and tool setters, ensuring tools are accurately measured.
• Create subroutine programs and edit existing machine programs.
• Document setups and train team members on proper processes.
• Adhere to ISO Quality Policies and maintain compliance with industry standards.
• Verify that parts meet tolerance and quality standards.
• Maintain a clean and safe working environment, following company policies.
• Coordinate schedules to meet production timelines.
• Log job details into the Epicor ERP system and maintain accurate records, including part counts and revision checks.
• Communicate effectively across teams to ensure seamless workflow and project completion.
• Demonstrate strong attendance, punctuality, and a proven work history.
• Exhibit self-motivation, proactivity, and the ability to work with minimal supervision.
• Display excellent math skills and attention to detail.
• Perform other duties as assigned.
  

• Minimum of 5 years' experience as a CNC Setup Machinist
• AA Degree or High School diploma with job experience
• Team player and positive, cooperative attitude
• Reliability and ability to listen and follow instruction
• Solution oriented and ability to respectfully communicate with colleagues
• Proficiency with setup sheets and understanding of G&M codes.
• Strong ability to troubleshoot and optimize programs and tooling.
• Detail-oriented with strong organizational skills and a sense of urgency.
  

• Training and room to grow
• We pay 100% of our employees' costs toward medical, and dental.
• Company sponsored life and disability Insurance
• 401K with up to 4% matching
• Paid holidays
• Generous Paid Time Off accrual
• Pleasant non-corporate environment
• Fun team bonding events
  

• Must be able to occasionally lift and/or carry up to 30 pounds.
• Must be able to push and/or pull up to 30 pounds.
• Must be able to continuously stand and/or walk for extended periods of time on concrete surface.
• Ability to repeatedly kneel, bend, crouch, reach and/or stoop throughout the shift as needed to successfully perform job duties.
  

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the Best Value supplier in the industry.

Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description other tasks may be assigned and expected to be performed.

• Sets up and operates induction hardening equipment to properly harden and temper and harden our product.
• Possesses and applies knowledge of heat treating processes, temperatures, atmospheres, quenching, soaking times, carburizing cycles and equipment maintenance.
• Assists furnace operators in determining temperatures, times, atmospheres, quenching, carburizing cycles and general heat treat processing of unusual and infrequently run steels and irons.
• Knows types of steel as to the proper heat treat requirements.
• Operates all related equipment efficiently.
• Possesses and applies knowledge of heat treating of tool steels and of tool furnace operation as well equipment related to carbon potential, and furnace temperature checking.
• Ensures part conformance to quality/drawing specifications; able to use instruments such as micrometers, calipers, gages, scales and hardness testing machines/devices to ensure proper hardness and depth of parts.
• Carefully loads and unloads furnaces to avoid improper quenching and cooling of parts remaining in the furnace.
• Performs running maintenance.
• Removes parts from furnace by hand or mechanical means and deposits parts in containers.
• Posts work output results to appropriate records.
• Processes parts through required cleaning or peening operations.
• Performs other related duties as directed.
• Works well with others and communicates effectively.
• Works safely and keeps work are organized and clean

• High school diploma or equivalent preferred; equivalent relevant experience may be considered
• Able to perform moderately active work typical of a manufacturing plant environment. Examples include pushing, pulling, lifting, standing, bending, twisting.
• Safety Sensitive position

U.S. Tsubaki offers:

• A competitive compensation package, including health benefits effective on date of hire, generous 401(k) match and profit sharing, education reimbursement, and annual bonus potential
• Paid Time Off (\"PTO\")
• 90-day and 180-day performance reviews
• Shift differential pay for 2nd and 3rd shift
• Weekly bonus potential
• Paid training
• Weekly pay
• Shift: 4 days a week, 10 hours per day.
• Days: Monday - Thursday (standard schedule). Overtime may be required on Fridays/Saturdays according to business needs.

Learn more about U.S. Tsubaki at: estimated salary range is meant to reflect an anticipated salary range for the position. We may pay more or less than of the anticipated range based upon market data and other factors, all of which are subject to change. Individual pay is based on location, skills and expertise, experience, and other relevant factors.

Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability

PM21

PIb0b4993f3222-26289-39806015

• 
  
• Ensure glove and hand safety.
  
• Follow bench grinder and surface grinder safety protocols.
  
• Use face shields appropriately.
  
• Inspect cranes and hoists and maintain logs.
  
• Properly rig and use cranes.
  
• Safely operate CNC mills and lathes, adhering to manufacturer and company safety protocols.
  
• Practice proper lifting techniques and recognize trip hazards.
  
• Complete safety skills and SED on time.
  
• Participate in monthly safety meetings.
  
• Follow all life-critical policies and JM Health and Safety policies.
  
• Use appropriate personal protective equipment (PPE) as required.
  
• Operate only the equipment for which you have been trained by a qualified person.
  
• Never tamper with machine safety guards or switches.
  
• Ensure setups can safely hold parts against cutting forces before starting machines.
  
• Exercise caution when running new programs, especially at the start and after tool changes.
  
• Know the location of emergency stops and practice using them.
  
• Maintain a tidy workspace to prevent accidents and injuries.
  
• Follow safety protocols for 2\" and hand grinders.
  

• 
  
• Start and home milling machines and lathes.
  
• Touch off tools, set offsets, and determine tool lengths and diameters using a tool setter.
  
• Load programs through Predator and USB and send proven programs back for updates.
  
• Adjust and edit tools and work offsets.
  
• Set XYZ and Z coordinates.
  
• Load and unload workpieces for milling operations.
  
• Change tool setter and probe batteries.
  
• Perform pre-production maintenance checks and clean machines.
  
• Change machine filters and check/fill coolant levels.
  
• Read refractometers for coolant concentration.
  
• Stone machine tables, fixtures, vises, chucks, and turrets prior to use.
  
• Perform basic mill setups, including indicating fixtures and vises.
  
• Setup mill and lathe tools and replace or identify worn tooling.
  
• Indicate vises and fixtures, change jaws, and set clamps.
  
• Use proper collets and holders for tools, demonstrating proper use.
  
• Follow and update Standard Operating Procedures (SOPs).
  
• Clean machine tool tapers and verify delivery of coolants and fluids.
  
• Empty chip bins and containers.
  
• Deburr finished parts and clean raw materials prior to loading.
  
• Grease vises and use machine DRO to understand machine positions.
  
• Clean collets and remove the chips, and clean tool holder caps before and after use.
  

• 
  
• Understand basic GD&T.
  
• Measure and verify length, width, and diameter of raw materials.
  
• Inspect and identify materials by type.
  
• Properly use and care for measurement equipment.
  
• Measure part/feature height/depth with depth micrometers.
  
• Measure with calipers (vernier, dial, and digital), ID micrometers, and OD micrometers.
  
• Measure threads with thread gauges.
  
• Measure part features, profiles, and dimensions optically or comparatively.
  
• Review part prints and identify critical dimensions.
  
• Verify milled and turned parts for quality and compliance.
  
• Test and verify calibrations of inspection tools.
  

• 
  
• Perform area housekeeping.
  
• Conduct shift changes and exchange information effectively.
  
• Maintain a good attitude and be a team player.
  
• Meet or exceed standard run times.
  
• Perform non-routine task lists and operator maintenance tasks.
  
• Maintain coolant levels and check concentration.
  
• Report any maintenance needs to the lead.
  
• Attend minute meetings on time.
  
• Provide useful suggestions that contribute to positive work results.
  
• Ensure the work area is ready for the next user.
  
• Accurately check tools out of the tool crib.
  

• 
  
• Minimum of 1-3 years' experience is required
  
• Extensive experience as a CNC Technician with a focus on safety and operational competencies.
  
• Strong understanding of CNC machine setup, maintenance, and troubleshooting.
  
• Ability to read and interpret technical documents and blueprints.
  
• Proficiency in using tool setters, collets, holders, and other CNC-related tools.
  
• Excellent attention to detail and problem-solving skills.
  
• Ability to follow and update SOPs.
  
• Strong communication and teamwork skills.
  

• 
  
• Ability to lift and move heavy objects up to 50 lbs.
  
• Prolonged periods of standing and working on machines.
  
• Manual dexterity and hand-eye coordination.
  

• 
  
• Manufacturing plant with exposure to noise, dust, and machinery.
  
• Use of personal protective equipment (PPE) as required.
  

SBM Management is looking to hire an Equipment Tech to join their team! This position is responsible for helping to ensure a clean lab environment, report any lab room or facility problems, clean and organize lab facilities, glass washing tasks, keep daily log of duties as required, perform other related duties as required and request cleaning materials as needed. Keep assigned areas clean and in an orderly condition. Work successfully with co-workers, customers, contractors, & others. Understand and follow instructions, both verbal and written. Understand instructions for task using basic communication skills.

Responsibilities include:

• Comply with safety rules, policies, and procedures.
• Perform work assignments in a team with other employees.
• Perform repetitive tasks.
• Maintain clean work area.
• Take direction and respond to supervision.
• Communicate with lead, supervisor, co-workers, managers, and customers in a professional manner.
• Support shift lead in completing punch-list items.
• Use proper personal protective equipment.
• Present a professional appearance and conduct.
• Understand customer service and satisfaction.
• Understand reporting systems and the environment.
• Perform repetitive tasks in a GMP environment.
• Perform sanitization duties to maintain a GMP controlled environment.
• Consistently follow all customer and SBM SOP's and procedures.
• Respond to customer requests in a professional manner.
• Fully train in area job functions for specific shift assignment and area classification including walls, floors, windows, wipe-downs, maintenance issue reporting, and shut-down cleaning.
• Complete daily FN logs accurately and completely.
• Must be trained and be certified in correct gowning procedures for assigned area.
• Complete all basic training modules and annual qualification trainings per customer Standard Operating Procedures.
• Complete all safety certifications including chemical safety.
• Available to act as area fill-in in the event of general staff shortage.
• Support shift lead in completing work orders and internally identified items for assigned area.
• Maintain logs and schedules.

Examples of tasks include but are not limited to:

• Setup and visual inspection of washer racks and associated washer.
• Monitor CIP 100 and 200 levels and changing out of CIP 100 and CIP 200 drums as needed.
• Loading soiled parts onto the washer racks per SOP.
• Programming of washer with appropriate Cycle # and starting washer inspecting and unloading clean parts from the washer.
• Bagging and/or covering clean parts.
• Printing wash labels for bagged/covered clean parts.
• Storing/delivering of clean parts.
• EUR documentation.
• Assembling small parts equipment.
• Preparation and Assembly of Production Kits.
• In Process Tag documentation, if applicable.
• Kanban parts.
• Filter installation.
• Operation of the Palltronic Filter Integrity Tester.
• Setup and visual inspection of autoclave prior to use.
• Daily/weekly maintenance (Bowie and Dick, Vacuum Hold Test).
• Loading of parts/equipment for sterilization.
• Unloading of parts/equipment.
• Storing/delivering of sterilized parts.
• EUR documentation.
• Stocking of General Supplies (IPA, bleach, crew wipes, gloves, pipe covers, conical tubes, nova septum bags, etc.).
• Stocking of COP parts (gaskets, clamps, caps, bleed caps, reducers, etc.).
• Transport of empty and full biobag totes to appropriate Manufacturing areas.
• Transport of parts/equipment in and out of manufacturing area(s), as required.
• Building single use assemblies.
• Inventory management of small parts.
• Transport of buffer and media totes up to 1000L.
• Retrieval and transport of used materials (empty totes, used filters, other plastics and trash).
• Equipment setup: CIP, SIP, Process (limited).

Qualifications include:

• Experience in aseptic or GMP/regulated manufacturing. H.S. diploma or GED or equivalent combination of training and experience. Completed all safety, environmental and task training certifications.
• Ability to read and interpret documents such as safety and environmental rules, equipment operating and maintenance instructions, and procedure manuals.
• Ability to speak effectively to customers, co-workers, contactors, and team members. Very good communications and decision-making skills.
• Ability to read blueprints and/or other technical documents a plus not required. English language proficiency in reading and writing.
• Ability to apply good judgment when carrying out instructions furnished in written, oral, or diagram form.
• Ability to deal with problems involving changes in standardized procedures and situations.
• Ability to learn the operation and care of equipment. Work is routine & repetitive.
• Recognize and understand safety signs and building warning systems.
• Understand safety requirements. Understand & meet company handbook expectations.
• Required intermediate computer proficiency skills.
• Required to have a valid driver's license, if driving own vehicle on business time or company vehicle. Will also be required to have proof of vehicle registration and insurance.
• Cross training responsibility throughout the facility from all line level staff perspective. Line level Glass wash, Janitorial, Disposal, shipping and receiving or any other soft services.

Shift: 6:00pm-11:00pm; Wed, Thurs, Sat & Sun

Compensation: $14.50-$15.50 per hour

SBM Management Services, LP and its affiliates are proud to be equal opportunity workplaces. We are committed to equal employment opportunity regardless of race, sex, color, ancestry, religion, national origin, sexual orientation, citizenship, age, marital status, disability, gender identity, Veteran status, or other legally protected status.

• Manage daily office operations and ensure office runs smoothly
• Coordinate onboarding and new hire orientations
• Partner with IT to ensure new hires are set up with equipment and access
• Order and manage office supplies, coffee, and breakroom items
• Coordinate lunch meetings, monthly birthday celebrations, and office events
• Arrange hotel accommodations and dinner reservations for visiting clients and staff
• Provide logistical support for in-office meetings (room setup, catering, clean-up)
• Lead new hire orientation for engineering and office staff Act as main point of contact between the office and corporate teams (HR, Accounting, IT, Legal, Facilities)
• Provide meeting and visitor support (room setup, catering, parking, clean-up
• Manage office supplies, inventory, PPE, and branded materials Support project teams with agendas, meeting minutes, and document production
• Assist field teams with administrative coordination and logistics
• Coordinate printing, proposals, and production-ready documents
• Monitor office technology and troubleshoot issues with internal IT Perform office safety checks and coordinate facility needs with building management Balance
• Provide logistical support for in-office meetings (room setup, catering, clean-up)

The Office Administrator supports the organization's goals by performing a broad range of responsibilities, including accounting support, operational coordination, office administration, and general administrative functions. This role contributes to the overall efficiency and effectiveness of the team and involves cross-functional collaboration with the National Accounting, Operations, and Human Resources departments.

Essential Responsibilities:

• Prepare check requests for open account invoices as needed.
• Coordinate check processing with National Accounting Administrators.
• After receiving Regional Manager of Accounting Operations & Administration approval, coordinate weekly subcontractor and material check processing with the National Accounting Administrators, ensuring checks are mailed via USPS or overnight courier services.
• Coordinate vendor payments via Corpay with National Accounting Administrators, including ongoing follow-up on stale checks and maintenance of the open check and credit card logs.
• Route check register reports to appropriate approvers and obtain required approvals prior to the release of payments.
• Regularly request Wintrust stale check information from Regional Manager of Accounting Operations & Administration. Follow up with vendors as needed, and request payment voids and reissuance. When voiding a stale check without reissuing payment, ensure the corresponding invoice is also voided. Reference unclaimed property laws in conjunction with National Accounting and clearly document the reason for voiding the invoice.
• Support Core Services with quarterly vendor statement reviews by referencing GLAC reports (55605570 and 61706700), adding any new vendors to the master listingexcluding those who provide monthly statements (e.g., Amazon). For vendors who submit monthly statements, review Core Services' updates for accuracy and provide direction as needed.
• Monitor Image Manager for pending invoice approvals, particularly during month-end and year-end close.
• Support vendor management processes, including submitting W9s for new vendor setup requests to the National Accounting Department, completing credit applications, and following up on returned 1099s.
• Complete new client/customer forms, including banking information as needed, and task the Regional Manager of Accounting Operations & Administration for review and approval before returning to the client.
• Promptly deposit and accurately code incoming paymentsincluding owner payments, refunds, and miscellaneous transactions.
• Ensure electronic payments are coded and deposit notifications are completed promptly, using information provided by the Regional Manager of Accounting Operations & Administration.
• Monitor and follow up on outstanding refunds to ensure timely collection.
• Follow up with vendors and team members to resolve unidentified refunds or payments.
• Maintain the funding spreadsheet by updating cash receipts and following up with Project Accountants on any aging payments.

Fleet & Equipment Support:

• Coordinate with the Operations Assistant to support local company vehicle processes, including registration, maintenance, branding, fuel cards, tolls, violations, recalls, vehicle transportation, equipment setup, driver assignments, and liquidations.
• Promptly communicate vehicle and driver changes to the Operations Assistant to ensure timely updates to Enterprise and WEX systems.
• Assist in gathering and submitting vehicle information for insurance and tax reporting as requested by the Operations Assistant.
• Distribute and maintain company-issued cell phones and air cards under the guidance of the Operations Assistant.

Office Administration:

• Greet and direct visitors in a professional and welcoming manner.
• Open, sort, and distribute incoming mail and packages; notify recipients upon delivery.
• Provide clerical support for outgoing packages, including coordination of IT equipment shipments.
• Order and stock office supplies, and coordinate procurement of parking validations.
• Serve as backup receptionist for incoming calls for Core Services during holidays and special events.
• Manage kitchen and break area upkeep, including end-of-day clean-up after catered meetings, weekly refrigerator cleaning, and drink restocking.
• Ensure the office remains clean, organized, and functional at all times.
• Oversee office maintenance and coordinate with vendors or building management as needed.
• Coordinate with building management to issue or update parking access and key fobs as needed.

Administrative and Operational Support:

• Assist with new hire onboarding by issuing necessary equipment and supplies (e.g., gas cards, cell phones, PPE, Home Depot cards). For offices without onsite Human Resources, facilitate day-one equipment setup and provide basic technical support for virtual onboarding. Support employee offboarding by collecting company-issued equipment from the employee, Human Resources, or Supervisor.
• Coordinate jobsite mobilization and demobilization, including safety postings, data lines, trailers, copier rentals, and supplies.
• Prepare permit authorization letters and supporting documents as needed.
• Serve as backup for Core Services with temporary employee housing and travel logistics.
• Support jobsite badging and other project-specific administrative tasks.
• Maintain vehicle records and documentation required for audits, compliance, and internal policies.
• Collaborate with internal departments to streamline administrative coordination and ensure consistent support.
• Provide administrative support including document preparation, reporting, data entry, recordkeeping, and other tasks as assigned to ensure efficient office operations.

Essential Skills:

Technical:

• Proficiency with CMiC, Box, and Microsoft Office Suite.
• Strong document and inventory management skills (digital and physical).
• Ability to troubleshoot and resolve basic technical issues.

Business and Management:

• Strong organizational and time-management abilities.
• Ability to prioritize tasks and manage multiple deadlines.
• Basic understanding of business operations and workflows.
• Resourceful in solving problems and improving processes to support operational efficiency.

Interpersonal:

• Effective written and verbal communication skills.
• Ability to collaborate with diverse teams.
• Professional demeanor and customer service orientation.

Personal:

• Detail-oriented and self-motivated.
• High degree of integrity and accountability.
• Willingness to learn and adapt in a dynamic environment.
• Ability to maintain confidentiality and handle sensitive information with discretion.

• High school diploma or equivalent required; Associate's degree in Business Administration, Accounting, or a related field preferred.
• 1+ years of experience in administration, accounting support, or operations coordination.
• Familiarity with fleet management, accounts payable and receivable, vendor coordination, and general office operations preferred.

• Ability to sit or stand for extended periods.
• Occasional lifting of items up to 10 lbs.
• Use of standard office equipment (computer, phone, copier, etc.).

• Primarily an office-based role with a standard MondayFriday schedule.
• May involve occasional travel or remote work as needed.
• Typical indoor working conditions with standard lighting and ventilation.

• 100% ESOP
• Competitive Pay
• Bonus Program
• Medical/Dental/Vision Insurance
• PTO/Sick
• 100% Life Insurance
• 401(K) with Match
• Student Debt Program

Building Great Relationships since 1925! 100% employee-owned general contractor. We build nationally, with locations in AZ, CA, CO, IL, TN, and TX. W.E. O'Neil Construction has seen steady growth since its founding in 1925 in Chicago by the O'Neil family. Now 100% employee-owned (ESOP), we embrace people as our number one asset. Our award-winning teams are recognized as industry leaders. Our

• Receive food and beverage orders from guests.
• Prepare and serve food and beverages in accordance with established service standards.
• Operate cash register, complete monetary transactions, and maintain an accurate bank.
• Maintain cleanliness of workstation and storage areas
• Greet and assist guests, riders, and event participants in a friendly and professional manner
• Clean and maintain horse stalls, including removing manure, replacing bedding, and ensuring proper sanitation
• Keep barn aisles, wash racks, and surrounding areas clean and safe
• Assist with event setup and cleanup when needed
• Report facility issues, maintenance needs, or safety concerns to management
• Set up banquet rooms according to event layouts, including tables, chairs, linens, and place settings
• Serve plated meals, buffets, and beverages to guests in a professional and courteous manner
• Clear dishes, glassware, and utensils promptly during and after service
• Refill water, coffee, and other beverages as needed
• Assist with buffet setup, monitoring food levels, and maintaining cleanliness
• Follow proper food safety and sanitation procedures
• Maintain a clean and organized work area before, during, and after events
• Assist with breakdown and cleanup of banquet areas after events
  
  

• Ability to work around horses and livestock comfortably
• Basic cash-handling skills and honesty in financial transaction
• Ability to perform physical tasks such as lifting, shoveling, sweeping, and pushing wheelbarrows
• Strong work ethic and reliability
• Good communication and customer service skills
• Strong customer service and communication skills
• Ability to work well in a fast-paced team environment
• Professional appearance and positive attitude
• Ability to follow instructions and pay attention to detail
• Ability to stand and walk for extended periods
• Ability to carry trays and lift up to 50 lbs
• Ability to bend, reach, and move quickly during service
• Evening, weekend, and holiday hours may be required
  
  

Job Title: Manufacturing Engineer

Location: Fully Onsite in Farmington CT

Type: Direct Hire

Salary: $120-140K DOE Plus Bonus and Excellent Benefits (Flexible on base Salary, can go higher depending on experience)

Summary:

The Manufacturing Engineer – CNC Programming is responsible for developing, optimizing, and maintaining CNC programs and machining processes for complex, production aerospace components. This role owns the end-to-end programming and process development lifecycle, from CAM programming and tool selection through prove-out and production release, and post release support with a strong emphasis on Nickel Alloy, Titanium, Steel, Stainless Steel, and other difficult-to-machine materials.

The ideal candidate is a practical problem-solver who understands how programs behave in the real world and takes pride in delivering programs that run with few to no issues once released.

Responsibilities:

• Develop and maintain CNC programs using Mastercam software for Okuma OSP, Haas, Fanuc and Makino machines
• Coordinate with engineering group to identify required features, tolerances, and run sequences.
• Own full program creation from concept through production release and ongoing optimization
• Define machining strategies, tooling approaches, and setup concepts for complex turning operations
• Support first article builds, prove-outs, and production ramp-ups
• Optimize programs and processes to reduce setup time, improve repeatability, and ensure consistent quality
• Collaborate with operators, quality, and engineering to ensure stable, production-ready processes
• Troubleshoot and improve existing programs as needed, with a focus on root cause and long-term solutions
• Ensure programs and documentation meet aerospace quality and regulatory requirements
• Publishes operator work instructions, set up sheets, parameter sheets as necessary

What Success Looks Like

• Programs are released cleanly and run with minimal edits or intervention
• Setups are clear, efficient, and repeatable across shifts
• Operators have confidence in the programs and supporting documentation
• Production issues related to programming are rare and resolved quickly when they occur

Qualifications:

• Minimum 5 years of CNC programming experience in a production environment
• Proven history of lathe turning programming (VTL and Slant Bed)
• BS in aerospace engineering, manufacturing engineering or similar
• Experience machining Nickel alloys, Titanium and other challenging aerospace metals
• Solid understanding of CNC machining principles, tooling, and cutting strategies
• Ability to read and interpret complex engineering drawings and GD&T
• Proven ability to develop robust, repeatable machining processes

Preferred Qualifications:

• Experience with Mastercam
• Experience with Okuma, Makino, and Haas controls
• Background in aerospace manufacturing
• Ability to improve legacy or unstable existing programs and processes
• Machining background to support program prove-out (program, set-up, qualify tooling, run development pieces/qualification lot etc)

About Us

Founded in 2010, Top Prospect Group specializes in connecting high-quality candidates with top-tier clients. In 2023, we joined HW Staffing Solutions, expanding our national footprint across manufacturing, engineering, logistics, and technology.

Interested Candidates – Apply Today

Please submit:

• A clean copy of your resume
• Salary expectations
• Availability

Riverview Farmers Market – Market Manager (Manager-in-Training) Position

The Riverview Farmers Market, located in the Heights neighborhood of Jersey City, is preparing for its sixteenth season and is seeking a motivated, professional, and dedicated Market Manager to join our team.

The market operates every Sunday from 10:00 AM to 2:00 PM, beginning on the first Sunday in May (5/3) and continuing through the Sunday before Thanksgiving in November (11/22). Market staff are expected to be present from 7:30 AM to 3:30 PM each Sunday to oversee market setup and breakdown. There is an additional Holiday Market that takes place on a Saturday in December (12/5/26) - the Manager-in-Training is expected to be present for that event date as well.

Each week the market hosts anywhere from 40 to 60 vendors, as well as local musicians, free arts programming, cooking demonstrations, and a variety of food access initiatives.

About the Position

We are seeking to hire a Manager-in-Training who will work alongside the current Market Manager during a transitional period prior to the current manager’s departure.

The Manager-in-Training will oversee a team of Assistant Managers responsible for the setup and breakdown of market equipment and infrastructure. The role also includes managing vendor relationships, overseeing day-of market operations and flow, enforcing health and safety regulations, administering SNAP/EBT benefits, and addressing operational issues as they arise.

The Manager-in-Training will serve as the primary liaison between market vendors and the Jersey City Health Department. Several training sessions will be conducted prior to the start of the market season in May to familiarize the selected candidate with the market’s programs and procedures.

The Manager-in-Training will report primarily to the President of Farms in the Heights, the nonprofit organization that operates the Riverview Farmers Market, and will be responsible for supporting the success of the market, its vendors, programs, and business operations.

The Manager-in-Training will work with our bookkeeping to ensure processing of payroll and vendor payments.

Organization Mission and Market Vision

In all responsibilities, the Market Manager (Manager-in-Training) must be committed to advancing the mission of Farms in the Heights and supporting the vision for the Riverview Farmers Market.

Mission:

To provide access to local food systems, strengthen the local economy, and promote environmental stewardship for the benefit of all members of the Jersey City Heights community.

Vision:

To operate a community-supported, thriving, producer-focused farmers market offering a wide range of vendors and products that serve the entire community while particularly supporting small, local family farmers.

Job Responsibilities

• Manage weekly market operations from 9:00 AM vendor setup through 3:00 PM vendor breakdown, with additional hours as required on special event days (on-site hours are 7:30AM - 3:30PM)
• Ensure vendor compliance with Farms in the Heights bylaws and Jersey City ordinances
• Review and enforce the Riverview Farmers Market Rules and Regulations and Code of Conduct
• Foster positive relationships with vendors, customers, and community members
• Assist in coordinating market activities, including purchasing and maintaining necessary supplies and conducting periodic inventory organization
• Ensure all daily market setup and shutdown protocols are followed
• Collect vendor stall fees and maintain accurate accounting records
• Ensure the market grounds are left clean and orderly after vendors depart
• Maintain regular communication with the Farms in the Heights Board President and board members as needed
• Mediate disputes between vendors and/or customers when necessary
• Respond to and manage emergencies in accordance with established protocols
• Ensure all market staff wear Riverview Farmers Market apparel each Sunday
• Attend monthly meetings with the Farms in the Heights Board President regarding market operations and job performance
• Attend or facilitate monthly check-ins with market vendors during the market season
• Assist in hiring Assistant Market Managers, including managing job postings and conducting interviews
• Supervise market assistants and volunteers recruited by the board
• Oversee the SNAP/EBT token program and maintain required grant compliance documentation
• Coordinate market events organized by the Farms in the Heights Board in collaboration with staff and other market personnel
• Perform other duties as assigned

Position Requirements

Education:

Associate’s degree, Bachelor’s degree, or an equivalent combination of education and relevant management experience.

Experience:

• Minimum of two years of people management experience, including personnel supervision, operational oversight, and budget responsibilities
• Minimum of four years of applicable work experience, e.g. with the public in retail, community programming, or other customer service environments

Upon hiring, the selected candidate must complete the ServSafe Food Manager Certification.

This role requires the ability to:

• Lift and move equipment weighing up to 50 pounds
• Work outdoors in varying weather conditions
• Remain on your feet for extended periods
• Move throughout the park to install equipment (including bending or crouching)
• Visually inspect vendor inventory and setups for compliance
• Complete tasks in a noisy and active outdoor environment
• Follow established operational protocols and respond promptly to issues

Additional requirements include:

• Must be authorized to work for any employer in the United States
• Professional-level proficiency in spoken and written English
• Strong interpersonal and communication skills
• Ability to build effective relationships with staff, vendors, contractors, and the public
• Excellent customer service orientation
• Strong organizational and problem-solving abilities
• Exceptional attention to detail
• Quick to learn new technologies and interfaces
• Intermediate proficiency of Google Docs, Google Sheets, and Google Drive

Preferred Qualifications

• Passion for local food systems, nutrition, health, and wellness
• Advanced knowledge of QuickBooks, Microsoft Excel, or Google Workspace
• Experience with grant accounting and grant management
• Interest in sustainable agriculture
• Access to a personal vehicle
• Conversational-level proficiency in Spanish
• Reliable access to a computer and printer/scanner

Salary

The Market Manager position pays $24.00–$28.00 per hour, depending on experience and qualifications.

The manager will oversee each market day during the season (30 Sundays in the 2026 season). The expected duration of a market day is 7-8 hours of work. In addition, the manager-in-training will be compensated at the same hourly rate for program support, grant management, and other administrative activities outside of market hours, estimated at approximately 3–6 hours per week.

Upon becoming a full Manager, the hourly management outside of Sunday market hours will increase to 10-12 hours per week. Anticipated hourly work for the full year, for a full manager, can range between 400-600 hours.