Clean Remote Codes Jobs in Usa

Bacon Plumbing, Heating, Air & Electric is looking for an experienced and motivated Wireman/Journeyman Electrician. This role focuses on residential service, repairs, remodels, and new installations. The ideal candidate is customer-focused, safety-minded, and experienced working in occupied homes with professionalism and courtesy.

Key Responsibilities

• Perform electrical installations, repairs, and upgrades in single-family homes, apartments, and residential remodel projects.
• Diagnose and troubleshoot electrical issues, providing accurate solutions and clear communication with homeowners.
• Install or replace panels, circuits, lighting, receptacles, switches, EV chargers, smart home devices, and other residential components.
• Run and bend conduit, pull wire, and complete clean, code-compliant workmanship.
• Read and follow residential blueprints and job plans.
• Maintain a clean and safe work environment inside customers’ homes.
• Provide homeowners with explanations of work performed, recommendations, and safety findings.
• Complete work orders, material lists, and digital documentation.
• Follow all NEC standards, local codes, and company safety procedures.
• Mentor and support apprentices when assigned.

Qualifications

• Valid Journeyman Electrician license (state-specific).
• 3–5+ years of residential electrical experience.
• Strong understanding of NEC as it applies to residential systems.
• Skilled in troubleshooting, diagnostics, and clean residential installations.
• Comfortable working in attics, crawl spaces, and tight areas.
• Professional communication and customer service skills.
• Valid driver’s license and clean driving record.

Preferred Skills

• Experience in residential service work and interacting directly with homeowners.
• Familiarity with smart home technology, energy-efficient lighting, and EV charging systems.
• Ability to upsell safety upgrades or recommended improvements (GFCI/AFCI, panel upgrades, surge protection).
• Proficiency with service management software

What We Offer

• Competitive salary and performance-based bonuses.
• Health, dental, and retirement benefits.
• Opportunities for professional growth and leadership development.
• A collaborative and supportive work environment.

Work Location: In person

Bacon Plumbing, Heating, Air & Electric is looking for an experienced and motivated Wireman/Journeyman Electrician. This role focuses on residential service, repairs, remodels, and new installations. The ideal candidate is customer-focused, safety-minded, and experienced working in occupied homes with professionalism and courtesy.

Key Responsibilities

• Perform electrical installations, repairs, and upgrades in single-family homes, apartments, and residential remodel projects.
• Diagnose and troubleshoot electrical issues, providing accurate solutions and clear communication with homeowners.
• Install or replace panels, circuits, lighting, receptacles, switches, EV chargers, smart home devices, and other residential components.
• Run and bend conduit, pull wire, and complete clean, code-compliant workmanship.
• Read and follow residential blueprints and job plans.
• Maintain a clean and safe work environment inside customers’ homes.
• Provide homeowners with explanations of work performed, recommendations, and safety findings.
• Complete work orders, material lists, and digital documentation.
• Follow all NEC standards, local codes, and company safety procedures.
• Mentor and support apprentices when assigned.

Qualifications

• Valid Journeyman Electrician license (state-specific).
• 3–5+ years of residential electrical experience.
• Strong understanding of NEC as it applies to residential systems.
• Skilled in troubleshooting, diagnostics, and clean residential installations.
• Comfortable working in attics, crawl spaces, and tight areas.
• Professional communication and customer service skills.
• Valid driver’s license and clean driving record.

Preferred Skills

• Experience in residential service work and interacting directly with homeowners.
• Familiarity with smart home technology, energy-efficient lighting, and EV charging systems.
• Ability to upsell safety upgrades or recommended improvements (GFCI/AFCI, panel upgrades, surge protection).
• Proficiency with service management software

What We Offer

• Competitive salary and performance-based bonuses.
• Health, dental, and retirement benefits.
• Opportunities for professional growth and leadership development.
• A collaborative and supportive work environment.

Work Location: In person

We areseekingan experienced and forward-thinkingSolution Architect - Data Engineeringto lead the design and implementation of scalable, secure, and high-performance data solutions. The ideal candidate will have deep expertise withPython and SQL, experience with data warehouses (Snowflake or something similar), a strong command ofengineering best practices(includinglinters and code formatters, project organization, and managing environments), and practical experience buildingCI/CD pipelinesto ensure robust, automated delivery of data pipelines and services.

• 
  
• Architect Scalable Data Solutions
  Design and implement end-to-end data engineering architectures that are scalable, maintainable, and performant across batch and real-time processing systems.
  

• 
  
• Engineering Leadership
  Lead by example with high-quality Python code,utilizinglinters (e.g.,pylint,flake8,black) and enforcing code cleanliness, readability, and best practices across teams.
  

• 
  
• CI/CD Pipeline Development
  Build, manage, and optimize CI/CD pipelines using tools such asGitHub Actions,GitLab CI,CircleCI, orJenkinsto automate testing, code quality checks, and deployment of data engineering components.
  

• 
  
• Data Governance & Quality
  Establish data validation, logging, and monitoring strategies to ensure data integrity and reliability at scale.
  

• 
  
• Collaborate Cross-Functionally
  Work closely with data scientists, software engineers, DevOps, and business stakeholders to translate requirements into technical solutions and ensure alignment with overall enterprise architecture.
  

• 
  
• Mentorship & Code Reviews
  Provide guidance to junior developers, lead technical reviews, and enforce clean coding standards throughout the data engineering team.
  

• 
  
• 7+ years of experience in software or data engineering, with 3+ years in an architectural or technical leadership role.
  

• 
  
• Expert-levelproficiencyinPython and SQL, with a deep understanding of best practices, performance tuning, and maintainable code patterns.
  

• 
  
• Proven experience withlinters,formatters, and other static analysis tools to ensure code quality and compliance.
  

• 
  
• Hands-on experience designing and implementingCI/CD pipelinesfor data pipelines, APIs, and other backend services.
  

• 
  
• Solid knowledge of modern data platforms and technologies (e.g., Spark, Airflow,dbt, Kafka, Snowflake,BigQuery, etc.).
  

• 
  
• Strong understanding of software engineering practices such as version control, testing, and continuous integration.
  

• 
  
• Experience working in cloud environments (AWS, GCP, or Azure).
  
• Familiarity with Infrastructure as Code (IaC) tools like Terraform or CloudFormation.
  
• Understanding of security, compliance, and governance in data pipelines.
  
• Excellent communication and documentation skills.
  
• Strong leadership presence with the ability to mentor and influence teams.
  
• Problem-solver with a focus on delivering value and simplicity through technology.
  

We offer a Total Rewards package that includes medical and dental coverage, 401(k) plans, flex spending, life insurance, disability, employee discount program, employee stock purchase program and paid family benefits to support you and your family.The salary range for this position is posted below. Where an employee or prospective employee is paid within this range will depend on, among other factors, actual ranges for current/former employees in the subject position, market considerations, budgetary considerations, tenure and standing with the Company (applicable to current employees), as well as the employee's/applicant's skill set, level of experience, and qualifications.

It is the policy of our company to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, ethnicity, gender, age, religion, creed, national origin, sexual orientation, gender identity, marital status, citizenship, genetic information, veteran status, disability, or any other basis prohibited by applicable federal, state, or local law.

Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

The employer will make reasonable accommodations in compliance with the American with Disabilities Act of 1990. The job description will be reviewed periodically as duties and responsibilities change with business necessity. Essential and other job functions are subject to modification. Reasonable accommodations may be provided to enable individuals with disabilities to perform the essential functions.

For applicants to jobs in the United States: In compliance with the current Americans with Disabilities Act and state and local laws, if you have a disability and would like to request an accommodation to apply for a position with our company, please email .

• 
  
• Design and build internal tools and automation-including API linting frameworks, OpenAPI specification validators, code?generation utilities, and workflow automation-to improve consistency, quality, and efficiency across the API lifecycle.
  
• Ensure developer experience is at the center of all software created, building intuitive, reliable, and friction?reducing tools that empower API producers and consumers and simplify their workflows.
  
• Collaborate, coordinate, and align with technical stakeholders such as architecture, platform engineering, security, and API governance teams to ensure tooling meets enterprise needs and integrates seamlessly with broader technical ecosystems.
  
• Apply industry best practices to deliver secure, scalable, and maintainable solutions that align with clients engineering, security, and compliance standards.
  
• Drive development activities from design through delivery, ensuring tools and services are released on time and effectively support both API producers and consumers.
  
• Champion code quality, implementing comprehensive unit testing, functional testing, and automated validation to ensure highly reliable solutions and fast feedback loops.
  
• Demonstrate engineering excellence, consistently applying high?quality engineering practices-including clean code principles, strong testing strategies (unit, integration, functional), CI/CD pipeline integration, versioning discipline, and reliable automated deployment strategies-to ensure tooling is robust, maintainable, and production?ready.
  
• Ensure all software created adheres to strong security principles, including secure coding practices, automated security scanning, vulnerability mitigation, and alignment with enterprise security standards-ensuring tooling is safe by design, safe by default, and safe in production.
  
• Support the tech lead in evaluating and shaping technical decisions, contributing insights and execution capabilities related to tooling, automation, and developer?experience improvements.
  

• 
  
• Programming & Scripting: Java | Python | JavaScript | TypeScript, Bash / Shell Scripting
  
• API Design & Management: RESTful APIs, OpenAPI / Swagger (Specification, Validation), API Linting Frameworks, API Governance & Standards Enforcement, API Versioning Strategies
  
• Automation & Tooling: Code Generation Utilities, Workflow Automation Tools, Internal Developer Tooling, CLI Tools
  
• Testing & Quality Engineering: Unit Testing | Integration Testing | Functional Testing, Automated Validation Frameworks, Test Automation Tools, Code Quality & Static Analysis Tools
  
• CI/CD & DevOps: CI/CD Pipelines (GitHub Actions, GitLab CI, Jenkins), Automated Build & Deployment Pipelines, Artifact Repositories, Infrastructure Automation
  
• Cloud & Platforms: Cloud Platforms (AWS / Azure / GCP), Containerization (Docker), Kubernetes (optional / platform-dependent)
  
• Security & Compliance: Secure Coding Practices, Automated Security Scanning (SAST / DAST), Vulnerability Management Tools, Dependency Scanning, Compliance & Enterprise Security Standards
  
• Developer Experience (DX): Developer Tooling & Enablement Platforms, Documentation Automation, API Consumer & Producer Enablement Tools
  
• Collaboration & Version Control: Git | GitHub | GitLab, Agile / Scrum Methodologies, Issue & Work Tracking Tools (Jira, similar)
  

6 Month Contract to Hire

Onsite 3 days/week – Hartford, CT

$55/hr-$65/hr

Must‑Have Qualifications

• Strong experience as a full stack developer delivering complex, enterprise‑scale applications
• Hands‑on experience designing and implementing conversational AI solutions using IBM WatsonX Orchestrate or similar platforms (Dialogflow CX, Amazon Lex, , LivePerson)
• Proficiency in NodeJS/TypeScript and Java with Spring, building RESTful web services
• Solid understanding of scalable architecture patterns, data lifecycle management, and cloud‑native development
• Experience developing and deploying microservices on OpenShift or comparable container platforms
• Strong Agile experience, including breaking down user stories into tasks and estimating work within a SAFe delivery model
• Strong collaboration and communication skills across co‑located, cross‑functional teams

Nice‑to‑Have Qualifications

• Experience with Angular, React, HTML, CSS, JSP, or Python
• Familiarity with Speech‑to‑Text tuning and SSML for text‑to‑speech refinement
• Exposure to analytics and data platforms such as Tableau, Alation, DataRobot, or Trifacta
• Experience with CI/CD pipelines using tools such as Jenkins, GitHub, or Octopus
• Strong business acumen and interest in emerging AI and conversational technologies

Day‑to‑Day

In this role, you will design, build, test, and deploy conversational AI solutions that deliver accurate, scalable, and context‑aware chatbot and voice experiences. You will participate in feature and user story refinement sessions, translate requirements into technical implementations, and develop conversational flows that integrate with enterprise APIs, cloud functions, and backend systems. You will collaborate closely with product managers, UI/UX designers, backend engineers, and other developers to ensure seamless end‑to‑end delivery. On a daily basis, you will troubleshoot, debug, tune, and optimize conversational agents across multiple channels, apply clean coding standards, and continuously improve conversational accuracy using NLP and training data best practices.

Mechanical Maintenance and Technical Instructor or Sr Mechanical Maintenance Instructor Position for Dresden Nuclear Power Station in Morris, IL

This Mechanical Maintenance and Technical Instructor role can be filled at the Maintenance and Technical Instructor Level, or at the Sr Maintenance and Technical Instructor Level. Please see minimum qualifications list below for each level.

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Maintenance and Technical Instructor Job Code XKAP- Expected salary range of $105,300 to $117,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Sr Maintenance and Technical Instructor Job Code XKAV - Expected salary range of $121,500 to $135,000 varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Demonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and proposed modification of plant specific maintenance and technical training programs (Chemistry, Engineering, Maintenance: Electrical, Instrumentation, and Mechanical, and Radiation Protection).

Primary Duties and Accountabilities

• Drives the clean energy center (CEC) and personnel performance improvement through the use of training. Develops, schedules, coordinates, and conducts performance-based maintenance or technical training programs as required by user community in accordance with Constellation's systematic approach to training model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.
• Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.
• Participates in CEC support activities, i.e. outage support, root cause support, line assessment support.
• Assures the training programs are maintained current and incorporate information gained from Institute of Nuclear Power Operations (INPO) Significant Operating Experience Reports and Constellation Nuclear Event Reports (NERs), Nuclear Regulatory Commission (NRC) Bulletins and Information Notices, CEC design change and backfit information, CEC procedure changes and revisions, new regulations, and training effectiveness reports.
• Support CEC and fleet in the areas of business initiatives, project management, refuel outage support, emergency preparedness duties, and special projects.
• Supervises the collection and maintenance of auditable training records and reports required to document training program activities.
• Participates in NRC, INPO and management audits, and prepares responses to audit findings.
• Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.
• Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.

This Maintenance and Technical Instructor role can be filled at the Maintenance and Technical Instructor Level, or at the Sr Maintenance and Technical Instructor Level. Please see minimum qualifications list below for each level.

Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAP
MINIMUM QUALIFICATIONS

• High school diploma/GED with 3 years of nuclear mechanical maintenance experience or 5 years of related (mechanical maintenance instruction) experience OR
• Associate&rsquos/Bachelor&rsquos degree in a technical discipline (e.g. chemistry, engineering, health physics, mathematics, physics), education or training with 2 years of related mechanical maintenance experience or 4 years of related (mechanical maintenance instruction) experience
• The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Sr Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAV
MINIMUM QUALIFICATIONS

• High school diploma/GED with 5 years of nuclear mechanical maintenance background or 7 years of related (Mechanical Maintenance) experience OR
• Associate&rsquos degree in technical discipline (e.g. chemistry, electrical, engineering, instrumentation, mathematics, mechanical, radiation protection), education or training with 3 years of nuclear mechanical maintenance background or 5 years of related (Mechanical Maintenance) experience OR
• Bachelor&rsquos degree in a technical discipline (e.g. chemistry, engineering, health physics, mathematics, physics), education or training with 3 years of related (Mechanical Maintenance) experience
• 2 years of training or education experience in Mechanical Maintenance
• The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, "Selection, Qualification, and Training of Personnel for Nuclear Power Plants"
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAP
PREFERRED QUALIFICATIONS

• Previous experience in delivering training
• Knowledge of and experience with the systematic approach to training (SAT)

Sr Mechanical Maintenance and Technical (M&T) Instructor Job Code: XKAV PREFERRED QUALIFICATIONS

• Foreman/lead or supervisory experience

Mechanical Maintenance and Technical Instructor or Sr Mechanical Maintenance Instructor Position for Dresden Nuclear Power Station in Morris, IL

This Mechanical Maintenance and Technical Instructor role can be filled at the Maintenance and Technical Instructor Level, or at the Sr Maintenance and Technical Instructor Level. Please see minimum qualifications list below for each level.

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Maintenance and Technical Instructor Job Code XKAP- Expected salary range of $105,300 to $117,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Sr Maintenance and Technical Instructor Job Code XKAV - Expected salary range of $121,500 to $135,000 varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Demonstrates mastery of skills and extensive subject matter knowledge in carrying out assignments associated with the analysis, design, development, implementation, evaluation, and proposed modification of plant specific maintenance and technical training programs (Chemistry, Engineering, Maintenance: Electrical, Instrumentation, and Mechanical, and Radiation Protection).

Primary Duties and Accountabilities

• Drives the clean energy center (CEC) and personnel performance improvement through the use of training. Develops, schedules, coordinates, and conducts performance-based maintenance or technical training programs as required by user community in accordance with Constellation's systematic approach to training model, department procedures, and with proper application of the analysis, design, development, implementation, and evaluation phases.
• Prepares trainee examination and conducts trainee evaluations for classroom, laboratory, OJT, and simulator environments, as appropriate and conducts counseling sessions for trainees, evaluates the results, and recommends/develops individualized training programs.
• Participates in CEC support activities, i.e. outage support, root cause support, line assessment support.
• Assures the training programs are maintained current and incorporate information gained from Institute of Nuclear Power Operations (INPO) Significant Operating Experience Reports and Constellation Nuclear Event Reports (NERs), Nuclear Regulatory Commission (NRC) Bulletins and Information Notices, CEC design change and backfit information, CEC procedure changes and revisions, new regulations, and training effectiveness reports.
• Support CEC and fleet in the areas of business initiatives, project management, refuel outage support, emergency preparedness duties, and special projects.
• Supervises the collection and maintenance of auditable training records and reports required to document training program activities.
• Participates in NRC, INPO and management audits, and prepares responses to audit findings.
• Maintains knowledge of plant operations, disciplinary skills and techniques, commensurate with the responsibility to develop and conduct effective, high-quality training.
• Perform other job assignments and duties as directed by management or pursuant to company policy, including but not limited to emergency response, departmental coverage, call outs, and support of outage activities in positions outside the department.

This Maintenance and Technical Instructor role can be filled at the Maintenance and Technical Instructor Level, or at the Sr Maintenance and Technical Instructor Level. Please see minimum qualifications list below for each level.

Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAP
MINIMUM QUALIFICATIONS

• High school diploma/GED with 3 years of nuclear mechanical maintenance experience or 5 years of related (mechanical maintenance instruction) experience OR
• Associate&rsquos/Bachelor&rsquos degree in a technical discipline (e.g. chemistry, engineering, health physics, mathematics, physics), education or training with 2 years of related mechanical maintenance experience or 4 years of related (mechanical maintenance instruction) experience
• The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, Selection, Qualification, and Training of Personnel for Nuclear Power Plants
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Sr Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAV
MINIMUM QUALIFICATIONS

• High school diploma/GED with 5 years of nuclear mechanical maintenance background or 7 years of related (Mechanical Maintenance) experience OR
• Associate&rsquos degree in technical discipline (e.g. chemistry, electrical, engineering, instrumentation, mathematics, mechanical, radiation protection), education or training with 3 years of nuclear mechanical maintenance background or 5 years of related (Mechanical Maintenance) experience OR
• Bachelor&rsquos degree in a technical discipline (e.g. chemistry, engineering, health physics, mathematics, physics), education or training with 3 years of related (Mechanical Maintenance) experience
• 2 years of training or education experience in Mechanical Maintenance
• The requirements as outlined above meet or exceed ANSI/ANS-3.1-2 Standard, Selection, Qualification, and Training of Personnel for Nuclear Power Plants
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties
  
  

Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAP
PREFERRED QUALIFICATIONS

• Previous experience in delivering training
• Knowledge of and experience with the systematic approach to training (SAT)

Sr Mechanical Maintenance and Technical (M&T) Instructor
Job Code: XKAV
PREFERRED QUALIFICATIONS

• Foreman/lead or supervisory experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Position Description

Torque by Ryder is Immediately hiring a Permanent Full Time Experienced Mobile Auto and Diesel Technician to support our Truck Fleet in Dallas, Texas

Hear it from a Torque Mobile Mechanic Technician Here:

• 
  
• Technician Positions Pay Each Week
  
  
• Hourly Pay: $38.00 per hour
  
  
• Retention Bonus: $2000 paid every quarter within the first year
  
  
• Schedule: Flexible 40-hour work week (weekend premiums apply)
  
  
• Fuel Card and Company Cell Phone provided
  
  
• For mobile technicians, work site service vehicle will be provided
  
  
• Grow with Ryder: This position provides additional training to level up.
  
  

We want the right Maintenance Repair Mechanic Technician to join us at Ryder to manage our fleet of Heavy Duty Trucks.

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call Kim or text “Dallas” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Apply today and see why a job with Ryder is what you’ve been looking for. Call us or go online to apply to one of our career opportunities

Click Here to See All Ryder Careers:

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High school diploma or equivalent preferred
  
  
• Vocational or Technical Certification Post Secondary degree or Technical Certifications, preferred
  
  
• Basic tools, required
  
  
• Requires demonstrated aptitude and applied experience in mechanical repair of automotive gas or diesel engines including:
  
  
• Routine preventative maintenance, which should include oil changes, brake and tire work
  
  
• Diagnostics and repairs, including AC, electrical systems
  
  
• Advanced skilled level repairs to include some major engine repairs, diesel after treatment or automotive fuel injection repairs
  
  
• Four (4) years or more Relevant work experience, preferred
  
  
• NonCommercial Driver License CLASS E, preferred
  
  
• Valid Commercial Driver License (CDL) CLASS A, preferred
  
  
• Other State driver's license, as required
  
  
• Four (4) years or more experience with mechanical repairs and diagnostics on heavy duty and medium duty equipment
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Able to take home assigned mobile service truck, as applicable, and secure vehicle and contents
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to:
  
  
• Understand and adhere to Company policies in all areas
  
  
• Complete repair orders with the Company established systems
  
  
• Create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Work independently and as a member of a team
  
  
• Prioritize workload
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Demonstrates customer service skills
  
  
• Strong verbal and written communication skills
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment
  
  
• Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Brakes-Air (BA220&BA298) within 90 Days
  
  
• Brake mechanics/inspectors FMCS 396.25
  
  
• Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Tire & Wheel TW220 within 90 Days
  
  
• CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• HD electrical - DR208 within 90 Days
  
  
• Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Complete 2 of the OEM On-Line diagnostic tool software courses as required by location fleet mi. (predominant OEM of fleet mix)
  
  
• This position requires for you to drive Ryder vehicles. In order to become a Ryder employee you must:
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Decision making: Responsible for making decisions surrounding vehicle diagnostics and repair
  
  
• Performs vehicle maintenance and repair duties including: standard vehicle maintenance, preventive maintenance, complex repairs with minimal (if any) support
  
  
• Demonstrate the ability to access and use internal and external maintenance documents - Diagnoses and repairs complex mechanical and electronic problems with minimal (if any) support, utilizing diagnostic computers/software when applicable
  
  
• Performs remote triage to with RCRC and customers to determine best solution to assist roadside breakdowns
  
  
• Performs facility maintenance duties
  
  
• Interacts with customers/drivers to properly determine nature of complaint once assigned a task
  
  
• Instructs and advises other technicians regarding maintenance repair procedures and diagnostics
  
  
• Interact with non-contractual customers, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction.
  
  
• Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform system checks such as power to compressor, visual inspection of condenser, belt tension, etc; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc, for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. Perform work in accordance with all federal/provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Performs other duties as assigned.
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements.
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer.
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 day ago (3/17/2026 1:49 PM)

Requisition ID 2

Location (Posting Location) : State/Province TX

Location (Posting Location) : City DALLAS

Location (Posting Location) : Postal Code 75247

Category Technicians/Service Employees9

Employment Type Regular-Full time

Travel Requirements Greater than 60%

Position Code 1001374

Min Pay USD $38.00/Hr.

Max Pay USD $38.00/Hr.

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of Clean Energy Center (CEC) turbine generator operations. Responsible for technical decision making and troubleshooting. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations. Enforce at all times procedure use and adherence, Human Performance (HU) fundamentals, Technical Human Performance (THU) techniques, and provide coaching and mentoring as necessary to achieve continuous improvement.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage, communicate, and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.

Minimum Qualifications

• Bachelor's degree and 5 years of related experience OR
• Current or previous Senior Reactor Operator (SRO) license with 5 years of related experience OR
• Associate's degree with 7 years of related experience OR
• High school diploma/GED with 9 years of related experience
• Maintain minimum access requirements or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Registration degree
• Advanced technical degree or related coursework

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience

Who We Are

As the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute.

Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.

Total Rewards

Constellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.

Expected salary range of $117,900 to $131,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).

Primary Purpose of Position

Performs advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.

Primary Duties and Accountabilities

• Provide in-depth technical expertise to develop, manage and implement engineering analysis, activities and programs.
• Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.
• Provide complete task management of engineering issues.
• Perform engineering and technical tasks as assigned by supervision applying general engineering principles
• Accountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.
• Perform independent research, reviews, studies and analyses in support of regulatory/technical projects and programs.
• Recommend equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.
• Must be willing to travel 10-50% of time, which may be to another Constellation Clean Energy Center.
• All other job assignments and/or duties pursuant to company policy or as directed by management to include but not limited to: (positions outside of department in support of outage activities etc.)

Minimum Qualifications

• Bachelor's degree in engineering (chemical, civil/structural, electrical, industrial, mechanical or nuclear) or technical discipline (e.g. chemistry, computer science, mathematics, or physics) with 5 years of industry experience or 3 years of Constellation Reactor Services department experience OR
• Current or previous Senior Reactor Operator license with 5 years of industry experience or 3 years of Constellation Reactor Services experience department OR
• Associates/non-technical 4-year degree/completion or a relevant, skilled trades apprenticeship program (e.g., boilermaker, pipefitter, operating engineer) with 7 years of industry experience or 5 years of Constellation Reactor Services department experience OR
• High school diploma/GED with 9 years of industry experience or 7 years Constellation Reactor Services experience department
• Maintain minimum access requirement or unescorted access requirements, as applicable, and favorable medical examination and/or testing in accordance with position duties

Preferred Qualifications

• Professional Engineer Certification
• Advanced technical degree or related coursework
• Design Engineering Qualifications
• Fuel Handling Qualifications and Experience
• Lifting and Rigging Experience
• Master Rigger Qualification
• Work Planning Qualifications
• Procedure Revision Experience
• Supervisory Qualifications and Experience
• P6 Scheduling Experience