Cider Clothing Jobs in Usa
495 positions found
Job Category: Operations Field
Requisition Number: CIDER016988
Posted: February 1, 2025
Full-Time
On-site
New York, New York, USA
DescriptionPrimary Job Responsibilities:
- Practice safety rules.
- Follow verbal and written instructions.
- Report to and assist immediate supervisor.
- Perform quality work as determined by project specifications.
- Accountable for all tools and materials at the end of your shift.
- Must work well as part of a team.
- Safety - Safety is a core value of our company and no job is so important that it cannot be completed safely. It is the responsibility of all employees to know and understand and comply with all company safety policies and federal, state, and local regulations. Employees have a responsibility to stop and correct unsafe work practices and to refuse to work in an unsafe situation.
- Mobilization and Demobilization - Ability to mobilize equipment being operated, including loading, unloading, securing, set up and tear down.
- Equipment Maintenance - Ensure that all equipment, vehicles, and tools are properly accounted for, used for correct purpose and are maintained.
- Other Serves as backup to other positions at the direction of management; and other duties as assigned.
- Lift, push, pull up to 50 pounds daily, seldom over 50 pounds.
- Grasp and manipulate various hand tools daily.
- Standing for more than two hours at a time, as well twisting, bending, pulling, pushing, reaching, and stooping regularly.
- Identify/distinguish colors and use of manual dexterity and fine motor skills.
- Communicate orally as well as ability to hear and understand.
- Work and operate motorized equipment as well as safely perform procedures where carelessness would potentially result in injury.
- Work in an environment that is uncomfortable due to drafts, noise, temperature variation or similar discomforts.
- Ability to proofread and check documents for accuracy, as well as use a keyboard to enter and transform words or data.
- Must comply with company's drug and alcohol abuse policy.
- Must be able to pass physical examination, pre-employment if necessary, and as required by the company.
- Able to climb and maintain balance on ladders, scaffolding, stairways, etc.
- Stoop, kneel, crouch, crawl, or work at elevated heights as well as in confined spaces (towers, vessels, excavations, etc.).
- It is recommended to get assistance to lift items over 50 lbs. Check with your project supervisor or project safety director.
- Must be able to work extended hours on your feet on uneven surfaces (dirt, concrete, asphalt, mud, gravel, etc.)
- Must be clean shaven and able to work while wearing a respirator and other personal protective equipment, when required.
Work Location
- Industrial construction sites and/or fabrication shops.
Mobility Barriers
- Uneven ground
- Obstructed pathways
- Work at low/high elevations
- Confined workspaces
Environmental Conditions
- Predominantly outdoor work
- Exposure to:
- Extreme heat or cold
- Humidity, rain, and other weather conditions
- Loud noise from tools and machinery
- Potential chemical exposure
Education & Experience Requirements:
- Minimum 1-2 years related experience excavating near underground utilities.
- Valid driver's license required.
Company Overview:
Primoris Services Corporation is a premier specialty contractor providing critical infrastructure services to the utility, energy, and renewables markets throughout the United States and Canada. Built on a foundation of trust, we deliver a range of engineering, construction, and maintenance services that power, connect, and enhance society. On projects spanning utility-scale solar, renewables, power delivery, communications, and transportation infrastructure, we offer unmatched value to our clients, a safe and entrepreneurial culture to our employees, and innovation and excellence to our communities.
Benefits:
- 401k w/employer match
- Health/Dental/Vision insurance plans
- Paid time off
- Stock purchase plan
Agency Statement:
We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR.
Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.
Beloved by young trendsetters and celebrities worldwide, Cider stands as one of the fastest-growing fashion brands today, with a following exceeding 5 million. Founded in 2020 and rooted in Los Angeles, we proudly serve customers in over 130 countries, offering a diverse range of styles from sizes XXS to 4XL. With our innovative smart fashion technology, Cider is leading the way towards a zero-inventory future, minimizing production waste without compromising quality. Our unique "Pick A Mood" collections transform everyday moods into captivating style statements, engaging the next generation and cementing our position as a Gen Z favorite.
Position Overview:
The Concept & Merchandising Associate works in close partnership with Design, Product Development, Operation, Creative and Marketing to support the creation of a saleable, trend-right assortment. By balancing creative vision with commercial acumen, this role ensures the delivery of compelling, data-driven products to market that hit margin targets and resonate with our Gen-Z consumer.
What You'll Do:
Concept Planning
-Develop and maintain the merchandising calendar, aligning seasonal trends, cultural moments, and business priorities to drive monthly concept planning.
-Independently and collaboratively lead the development of monthly concepts, translating trend insights, social listening, and market analysis into clear product directions.
-Create compelling concept decks that define product vision, styling direction, key items, and storytelling while ensuring alignment with brand identity and revenue goals.
-Identify white-space opportunities through trend research, competitive landscape analysis, and consumer insights.
Product & Merchandising Development
-Partner closely with Design and Product Development to translate concept direction into commercially viable products.
-Support the development of each collection by identifying key looks, hero products, and selling points that balance creativity with commercial potential.
-Provide merchandising input on silhouettes, category mix, pricing strategy, and trend relevance to drive strong sell-through and margin performance.
-Track product development progress to ensure concept vision is executed effectively from ideation to final product.
-Provide merchandising support for retail stores, assisting with product selection and assortment alignment.
Collection Launch & Cross-Functional Collaboration
-Collaborate with Creative and Marketing teams to ensure concept storytelling and visual direction are clearly communicated across campaigns, content, and site merchandising.
-Support cross-functional alignment across Design, Production, Operations, Creative, and Marketing to ensure successful product launches.
-Provide concept context and product insights that inform campaign narratives, styling, and product storytelling.
Who You Are:
- 2+ years in a Merchandising, Buying, Trend Forecasting, or Concept Design role at a fast-fashion, commerical or contemporary apparel brand.
- Ability to think strategically and act tactically—you see the big picture but can execute the details
- Strong interpersonal, communication, presentation and problem-solving skills; comfortable pitching ideas and defending data-driven decisions
- Comfortable in a self-starter environment with limited hand-holding
- Capable of multi-tasking in a fast-paced, deadline-oriented environment
- Commitment to follow-through on all tasks and projects from concept to sell-through
- Excellent MS Office skills, specifically advanced Excel; experience with PLM or ERP systems a plus
- Deep understanding of U.S. market and Gen-Z consumer behavior
- Ability to speak Mandarin a plus
- Ability to travel domestically, and internationally throughout the year.
-Remote within the US, preferred candidate would be local to the LA area.
-Must show previous conceptual work, or be prepared to do a trend project.
Beloved by young trendsetters and celebrities worldwide, Cider stands as one of the fastest-growing fashion brands today, with a following exceeding 7 million. Founded in 2020 and rooted in Los Angeles, we proudly serve customers in over 130 countries, offering a diverse range of styles from sizes XXS to 4XL. With our innovative smart fashion technology, Cider is leading the way towards a zero-inventory future, minimizing production waste without compromising quality. Our unique "Pick A Mood" collections transform everyday moods into captivating style statements, engaging the next generation and cementing our position as a Gen-Z favorite.
We are seeking a seasoned and strategic Human Resources Business Partner (HRBP) to join our team in Los Angeles. This role is instrumental in supporting our U.S. retail and corporate operations, with a focus on recruitment, performance management, and HR compliance—especially within California. The ideal candidate will bring deep knowledge of U.S. and California employment laws and experience partnering with business teams
Key Responsibilities:
- Serve as a trusted HR advisor to business leaders and employees, especially in retail operations
- Lead full-cycle recruitment efforts for store and corporate roles, including sourcing, interviewing, and offer negotiation
- Partner with HQ and local teams to support and localize employee training programs
- Design and implement store-level performance management frameworks aligned with business goals
- Ensure HR policies, practices, and documentation are fully compliant with California and broader U.S. labor laws
- Handle employee relations matters with sensitivity and in accordance with legal requirements
- Support cross-border HR initiatives in coordination with global teams
- Provide bilingual support for internal communication, documentation, and training
Qualifications:
- 3-5 years of progressive HR experience, including direct HRBP responsibilities
- In-depth understanding of California employment laws and general U.S. HR compliance requirements
- Strong experience in recruitment and talent acquisition strategies
- Exposure to employee training development or facilitation (light involvement is acceptable)
- Experience designing or executing performance management systems, preferably in a retail or multi-site environment
- Excellent interpersonal and problem-solving skills
- Fluent in both English and Mandarin Chinese, with strong verbal and written communication skills
- Bachelor’s degree in Human Resources, Business Administration, or a related field
Civil Clothing Inc. is seeking a Product Development Coordinator to support the end-to-end development of Darc Sport collections, partnering with our Torrance-based team to ensure product moves efficiently from concept through production. In this role, you’ll help bring designs to life by coordinating sample development, maintaining accurate product documentation, tracking WIP and samples, and supporting cross-functional teams throughout the development cycle.
You’ll work closely with Design, Technical Design, Sourcing, Planning, and factory partners to keep projects organized, information accurate, and timelines on track. The ideal candidate is organized, proactive, and collaborative, with a strong attention to detail and a service-oriented mindset. A foundational understanding of garment construction, fabrics, and the product development process will help you succeed as you support the team in delivering well executed product to market.
This role plays an important part in ensuring our collections move smoothly through the development process. At Civil, we value accountability, precision, and strong follow-through. Your work will help keep product development organized, timelines on track, and cross-functional teams aligned, supporting the successful delivery of product from concept through production while maintaining the quality and brand standards Civil is known for.
What You’ll Do
Product Development Coordination
- Support the end-to-end product development process by coordinating samples, materials, and documentation across multiple collections and seasonal drops.
- Track incoming samples including protos, fit samples, and development materials, ensuring they are labeled, organized, and accurately logged.
- Assist with sourcing and organizing development materials such as fabrics, lab dips, strike-offs, and trims.
- Maintain accurate tech packs and update documentation as changes occur throughout the development cycle.
Sample Tracking & Documentation
- Maintain weekly WIP reports and development trackers to ensure accurate visibility for cross-functional teams.
- Create and maintain spreadsheets, line lists, and development reports to support product tracking and planning.
- Submit clear and organized comments to vendors following sample reviews and fittings.
Vendor & Factory Communication
- Communicate daily with overseas vendors and sourcing partners regarding development progress, sample status, delivery timelines, and cost considerations.
- Ensure vendor communication is clear, timely, and accurately reflects design, development, and production updates.
Cross-Functional Collaboration
- Partner closely with Design, Technical Design, Production, Planning, and Sales teams to support smooth product development and alignment across departments.
- Assist in coordinating sample submissions and approvals with internal teams, buyers, and sales partners when needed.
- Support the Production and Planning teams in tracking timelines and helping expedite urgent development needs.
Operational Excellence
- Help maintain development calendars and track progress against key milestones to support on-time delivery.
- Provide general administrative support to the Product Development team, helping maintain organized records and development materials.
- Proactively follow up on outstanding tasks, samples, and vendor updates to keep projects moving forward.
- Identify potential delays or gaps in information early and escalate appropriately to protect timelines.
- Maintain strong attention to detail and follow-through across all tracking, communication, and documentation.
- Operate with accountability and a solutions-oriented mindset in a fast-paced environment.
Culture & Team Contribution
- Contribute to a respectful, inclusive, and collaborative team environment.
- Build positive working relationships across departments and with external vendors to support smooth execution.
- Demonstrate professionalism, reliability, and a sense of urgency in completing tasks and meeting deadlines.
- Take pride in accuracy, organization, and supporting the broader team’s success through consistent follow through.
What You Bring
Knowledge, Skills & Abilities
- Working knowledge of apparel development, garment construction, and product development processes.
- Proficiency in Microsoft Excel, Word, and Outlook for tracking, documentation, and communication
- Familiarity with PLM systems or tech pack tools is a plus.
- Familiarity with Adobe Illustrator and Photoshop for reviewing design and development materials is a plus.
- Strong attention to detail and accuracy across documentation, sample tracking, and development updates.
- Excellent organization and time management skills with the ability to manage multiple projects and deadlines.
- Ability to work efficiently and stay organized in a fast-paced, deadline-driven environment.
- Clear written and verbal communication skills when working with internal teams and vendor partners.
- Strong follow-through and proactive communication to keep development timelines on track.
- Collaborative, positive team player who works well across departments.
- Self-starter who takes ownership of work and approaches challenges with a solutions-oriented mindset.
Education & Experience
- Associate’s or Bachelor’s degree in Apparel Product Development, Fashion Design, or a related field preferred; equivalent hands-on experience will also be considered
- 1–3 years of experience in apparel product development, merchandising, or a related role; internship experience encouraged.
- Basic understanding of garment construction, product development workflows, and sample stages.
- Experience supporting products from concept through development and production is a plus.
- Proficiency in Adobe Illustrator and Photoshop for reviewing technical drawings and construction details.
- Experience in streetwear, action sports, or apparel environments is a plus.
Physical & Mental Demands
- This role is primarily office-based with regular use of standard office equipment.
- Ability to sit or stand for extended periods and move throughout office, showroom, or production environments as needed.
- Ability to occasionally lift, carry, or move materials or product weighing up to 25 lbs, with or without reasonable accommodation.
- Visual requirements include close vision, distance vision, depth perception, and the ability to adjust focus, with or without reasonable accommodation.
- Ability to work in varied environments, including exposure to noise, temperature fluctuations, and occasional outdoor elements.
- Ability to manage multiple priorities, deadlines, and shifting demands in a fast-paced environment.
- Capacity to maintain focus, sound judgment, and professional communication while navigating time-sensitive issues.
- This role may require flexibility in work hours during peak production periods.
Travel Requirements
- Valid CA Driver’s License
Why You’ll Love Working at Civil
At Civil Clothing we foster a collaborative, fast-moving environment where ownership is valued, ideas are welcomed, and execution matters. You’ll work alongside passionate, experienced teams who care deeply about craftsmanship, accountability, and bringing product to market the right way.
This role offers the opportunity to make a real impact, your decisions directly influence our product quality, timelines, and growth. If you thrive in a hands-on, solutions-driven environment and want your work to be seen, felt, and worn, you’ll feel right at home here.
What We Offer
- Competitive compensation: $55K – $70K annually, depending on experience and qualifications
- Comprehensive benefits package, including:
- Medical, dental, and vision insurance
- Life insurance
- Employee Assistance Program (EAP)
- 401(k) with company match
- Paid time off (PTO)
- Employee merchandise discounts
- Opportunity to grow with a respected and evolving apparel brand
Equal Opportunity Employer
Civil Clothing Inc. is proud to be an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are based on qualifications, merit, and business needs, without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other protected status under applicable law.
- 1:30 PM Cleanroom environment
- Must be able to read and understand English Description: This is a non-exempt position.
This position is responsible for the production of high-quality medical devices within a manufacturing cell.
Working under close supervision may perform a combination of assembly, repair, and test operations on pacemakers, implantable cardioverter defibrillators (ICDs), leads, and related medical device assemblies.
Performs routine assignments according to specified and standardized procedures.
Work is closely and continually reviewed.
Ensure that relevant job documentation for cell operations and functions is accurate and up to date.
Be able to clearly communicate ideas, problems, and solutions to all levels of manufacturing management in both written and oral form.
Maintain a positive attitude when interacting with internal and external customers such as tours.
Follow safety guidelines and utilize appropriate safety devices when performing all operations.
Participate in continuous improvement/quality initiatives in order to enhance production processes to achieve quality and profitability metrics.
Maintain accurate records to ensure traveler and quality documents are accurate, all parts are traceable and quality issues can be addressed to assure the quality of all products.
Demonstrates a basic understanding of Lean Manufacturing.
Participate with the Manufacturing Supervisor/Manager in setting and monitoring individual goals and cell performance metrics that continuously seek to improve the quality of operations.
Support all Divisional initiatives as identified by divisional management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements Ability to read, comprehend, and follow written procedures; understand and follow verbal instructions
- Understanding of and ability to utilize electronic data collection systems and computer software packages.
Ability to prioritize work by determining the sequencing and timing of different jobs based on precedence and importance.
Ability to handle and maneuver small components and parts.
Ability to make critical decisions and judgments with minimal supervision.
A high school degree or equivalent is required.
Required dress code for tour during interview and on-the job: Clothing must be non-shedding and free of frayed hems or loose threads.
Tassels, fringes, glitter, sequins (sewn or glued on), and any other items that could become dislodges are not allowed on clothing.
To verify a fabric can be worn: pull at the fabric tightly with your fingers, if fibers are dislodged, the garment may not be worn in the production area.
Sweaters, sweater vests, loose fiber garments, loose knit, or fleece may not be worn.
All clothing must be clean and free of visible contamination (sand, mud, dirt, lint, etc.).
All clothing, from the waist up, must fit under the lab coat/gown.
Turtle necks or high-necked clothing shall not stick out above the neck of the lab coat/gown.
Sleeves shall not stick out beyond the cuff of the lab coat/gown.
Caps, hats, scarves, or bandanas shall not be worn under the bouffant.
Head wraps/scarves worn to accommodate customs: Must be covered by the bouffant and the tail end of the scarf must be fully covered by the lab coat/gown.
Must be of tightly woven fabric, be clean, and laundered.
Loose-fitting clothing shall not be worn around machinery or soldering/brazing torches.
Shoes must be worn at all times in the production area.
Stockings or socks are required.
The heel of a shoe must not be pointed or higher than 2 inches.
Sandals, clogs, slippers, and open-toe, or open-heel shoes are not allowed.
Shoes with straps or weave where toes can be seen are not allowed.
Changing shoes in the production area, other than a gowning room, is not allowed.
Torsos, upper arms, and legs must be covered.
Pants (above the ankle), skirts (above the ankle), skirts with slits, short shirts (above the navel), and sleeveless tops are not allowed.
Skirts at the ankle are allowed, but full-length stockings, leggings, or pants must be worn under them.
Nail polish, acrylic, artificial nails, or similar nail coatings are not allowed.
Jewelry or body piercings that can pierce gloves or cannot be covered under gowning materials will not be permitted in the production area.
Makeup shall not be worn.
Lip balm in stick form is acceptable when applied outside of production areas and prior to hand washing.
Scented personal use products shall not be worn, except deodorant.
Lotions shall not be applied after hand washing.
Cover any open or bleeding wound with a bandage.
Don't wear anything that could be offensive.
Maintain inventory and orders orthopedic medical supplies and/or durable medical equipment Assembling medical devices for a medical supply company in a laboratory clean room work environment Assembling medical devices in a laboratory clean room work environment Build complex medical devices under minimal direction and supervision Assembling medical kits according to PIC slips Completed in compliance with company quality system and medical device regulations Assemble medical products, performing a variety of tasks on a rotating basis Inspect, stock, and ship disposable medical supplies down the product line Assemble medical components, subassemblies, products or systems Utilizing hand-held/bench machinery to facilitate the assembly of medical products of a simple to complex nature Read and follow written work instructions Understanding of FDA and international regulatory requirements for medical device packaging validation Assemble and test medical devices and related products in accordance with documented work instructions and procedures Performing light assembly on medical devices according to client specifications Inspect assembles per Manufacturing Procedure or Assembly drawings Lead the start-up and ongoing operation of the Company's medical device package testing group Assemble and test medical device assemblies, final products, and accessories per the manufacturing documentation Assemble, bonds coats and process medical devices and related parts using microscopes and applicable tools Examine medical devices and related assemblies after molding operations to locate bubbles, nicks and/or excess epoxy Interpret applicable medical device regulations including 21 CFR Part 820, ISO standards, CDRH guidelines and medical device directives
This role ensures adherence to contamination control practices, SOP/GMP compliance, accurate batch documentation, and safe handling of cloth, film, and solution contact components.
Operators serve on the front line of aseptic behavior, environmental discipline, and product integrity, supporting compliant and efficient manufacturing operations.
Job Description AVAILABLE SHIFTS: 1st Shift: Mon-Fri 6am-2:30pm 2nd Shift: Mon-Fri 2pm-10:30pm 3rd Shift: Mon-Fri 10pm-6:30am MAJOR RESPONSIBILITIES Cleanroom Conduct & Gowning Follow all cleanroom gowning requirements and adhere to gowning and material entry protocols.
Follow good aseptic practices when performing all tasks within ISO-certified environments.
Pre-Run Preparation Complete all pre-run checks, including: Line clearance procedures Verifying production parameter sheets and counter readings Checking machine cleanliness status Accurate documentation Cloth Converting Operations Load cloth rolls using approved cleanable dollies or carts, minimizing manual handling.
Set up and operate unwind stations, tension controls, alignment systems, folding boards, and cutting mechanisms according to validated line parameters.
Monitor dosing application (when applicable), including flow rate, nozzle alignment, and solution coverage.
Continuously inspect the web path for defects (tears, fraying, or contamination) and adjust as needed.
Perform required hourly inspections and document results.
OR Packaging Line Operations Load film rolls using approved cleanable carts or lifts, minimizing manual handling.
Set up and maintain packaging parameters within validated specifications.
Set up and verify date/lot coding equipment and inspection verification systems.
Perform required hourly inspections and document results.
Documentation & Escalation Real-time, accurate, and complete documentation on all forms and records.
Follows Good Documentation Practices Immediately escalate deviations to the Supervisor or Quality.
Cleaning & Responsibilities Perform cleaning activities according to established procedures.
Assist with sanitization steps for all tools/equipment and execute proper changeover cleaning sequences.
Handle scrap per established procedure and ensure scrap receptacles never leave the cleanroom.
Safety & Ergonomics Follow all EHS procedures, including chemical handling requirements.
Use proper ergonomic techniques when lifting cloth rolls and moving materials.
MINIMUM JOB REQUIREMENTS Education High school diploma or GED required Work Experience Experience in aseptic manufacturing environment Knowledge / Skills / Abilities Effective communication and interpersonal skills, including the ability to guide and collaborate with others.
Comfortable working in cleanroom and controlled environments while adhering to gowning, safety, and quality requirements.
Other duties as assigned.
Flexibility to work mandatory overtime based on business needs.
Ability to speak, read, and write English with proficiency PREFERRED JOB REQUIREMENTS Work Experience Hands-on experience in GMP-regulated pharmaceutical or biopharmaceutical manufacturing.
Knowledge / Skills / Abilities Strong working knowledge of GMP regulations, aseptic techniques, and biopharmaceutical manufacturing processes, with the ability to execute work in compliance with SOPs, batch records, and technical documentation.
Proven ability to operate, monitor, troubleshoot, and maintain biopharmaceutical manufacturing equipment.
Demonstrated attention to detail with the ability to accurately complete GMP documentation and support investigations and escalate issues.
Effective communication and interpersonal skills, including the ability to guide and collaborate with others.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $21.75
- $31.50 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
Working under close supervision, may perform a combination of assembly, repair, and test operations on pacemakers, implantable cardioverter defibrillators (ICDs), leads, and related medical device assemblies.
Performs routine assignments according to specified and/or standardized procedures.
Work is closely and continually reviewed.
Ensure that relevant job documentation for cell operations and functions is accurate and up to date.
Be able to clearly communicate ideas, problems and solutions to all levels of manufacturing management in both written and oral form.
Maintain a positive attitude when interacting with internal customers and external customers such as tours.
Follow safety guidelines and utilize appropriate safety devices when performing all operations.
Participate in continuous improvement/quality initiatives in order to enhance production processes to achieve quality and profitability metrics.
Maintain accurate records to ensure traveler and quality documents are accurate, all parts are traceable and quality issues can be addressed to assure the quality of all products.
Demonstrates a basis understanding of Lean Manufacturing.
Participate with the Manufacturing Supervisor/Manager in setting and monitoring individual goals and cell performance metrics that continuously seek to improve the quality of operations.
Support all Divisional initiatives as identified by divisional management and in support of Quality Management Systems (QMS), Environmental Management Systems (EMS), and other regulatory requirements Ability to read, comprehend, and follow written procedures; understand and follow verbal instructions
- Understanding of and ability to utilize electronic data collection systems and computer software packages.
Ability to prioritize work by determining the sequencing and timing of different jobs based on precedence and importance.
Ability to handle and maneuver small components and parts.
Ability to make critical decisions and judgments with minimal supervision.
High school degree or equivalent required.
Required dress code for tour during interview and on-the job: Clothing must be non-shedding and free of frayed hems or loose threads.
Tassels, fringes, glitter, sequins (sewn or glued on), and any other items that could become dislodges are not allowed on clothing.
To verify a fabric can be worn: pull at the fabric tightly with fingers, if fibers are dislodged, the garment may not be worn in the production area.
Sweaters, sweater vests, loose fiber garments, loose knit, or fleece may not be worn.
All clothing must be clean and free of visible contamination (sand, mud, dirt, lint, etc.).
All clothing, from the waist up, must fit under the lab coat/gown.
Turtle necks or high-necked clothing shall not stick out above the neck of the lab coat/gown.
Sleeves shall not stick out beyond the cuff of the lab coat/gown.
Caps, hats, scarves or bandanas shall not be worn under the bouffant.
Operators serve on the front line of aseptic behavior, environmental discipline, and product integrity, supporting compliant and efficient manufacturing operations.
Job Description AVAILABLE SHIFTS: 1st Shift: Mon-Fri 6am-2:30pm 2nd Shift: Mon-Fri 2pm-10:30pm 3rd Shift: Mon-Fri 10pm-6:30am MAJOR RESPONSIBILITIES Cleanroom Conduct & Gowning Follow all cleanroom gowning requirements and adhere to gowning and material entry‑ protocols.
Follow good aseptic practices when performing all tasks within ISO-certified environments.
Pre-Run Preparation Complete all pre-run checks, including: Reconciliation of materials.
Verifying process piping cleaning requirements for the upcoming batch.
Confirming availability of cloth rolls, film, solution, and other materials.
Material Staging Stage cloth rolls, film, and other packaging materials per established procedures to minimize contamination risk.
Maintain unidirectional flow of cloth, film, totes, and packaging components to prevent cross contamination.
Manage raw materials to ensure expired or incorrect lots are not used.
CIP/COP Processes Perform all cleaning activities related to process piping and components according to established procedures.
Execute sanitization cleaning cycles for all raw materials entering cleanroom environments.
Perform sanitization steps for all tools/equipment and execute proper changeover cleaning sequences.
Documentation & Escalation Real-time, accurate, and complete documentation on all forms and records.
Follows Good Documentation Practices Immediately escalate deviations to the Supervisor or Quality.
Cleaning & Responsibilities Perform cleaning activities according to established procedures.
Handle scrap per established procedure and ensure dedicated scrap receptacles never leave the cleanroom.
Safety & Ergonomics Follow all EHS procedures, including chemical handling requirements.
Use proper ergonomic techniques when lifting and moving materials.
MINIMUM JOB REQUIREMENTS Education High school diploma or GED required Work Experience Prior manufacturing experience.
Knowledge / Skills / Abilities Must be able to lift up to 50 lbs.
Must be able to bend, twist, reach, push, lift for extended periods daily.
Comfortable working in cleanroom and controlled environments while adhering to gowning, safety, and quality requirements.
Other duties as assigned.
Flexibility to work mandatory overtime based on business needs.
Ability to speak, read, and write English with proficiency PREFERRED JOB REQUIREMENTS Work Experience Experience in aseptic manufacturing experience in GMP and ISO-cleanroom environments.
Knowledge / Skills / Abilities Strong working knowledge of GMP regulations, aseptic techniques, and biopharmaceutical manufacturing processes, with the ability to execute work in compliance with SOPs, batch records, and technical documentation.
Proven ability to operate, monitor, troubleshoot, and maintain biopharmaceutical manufacturing equipment.
Demonstrated attention to detail with the ability to accurately complete GMP documentation and support investigations and escalate issues.
Effective communication and interpersonal skills, including the ability to guide and collaborate with others.
Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.
The anticipated salary range for this position: $20.25
- $29.25 Hourly The actual salary will vary based on applicant’s location, education, experience, skills, and abilities.
Medline will not pay less than the applicable minimum wage or salary threshold.
Our benefit package includes health insurance, life and disability, 401(k) contributions, paid time off, etc., for employees working 30 or more hours per week on average.
For a more comprehensive list of our benefits please click here .
For roles where employees work less than 30 hours per week, benefits include 401(k) contributions as well as access to the Employee Assistance Program, Employee Resource Groups and the Employee Service Corp.
We’re dedicated to creating a Medline where everyone feels they belong and can grow their career.
We strive to do this by seeking diversity in all forms, acting inclusively, and ensuring that people have tools and resources to perform at their best.
Explore our Belonging page here .
Medline Industries, LP is an equal opportunity employer.
Medline evaluates qualified individuals without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, age, disability, neurodivergence, protected veteran status, marital or family status, caregiver responsibilities, genetic information, or any other characteristic protected by applicable federal, state, or local laws.
The Certified Nursing Assistant (CNA), under the direction and supervision of the Director of Nursing and/or the assigned charge nurse, provides individualized care to residents to include routine daily care, promoting maximum independence, safety, and comfort for each resident.
*Full Time, Part Time Plus and Part Time options available.
Starting hourly rate is $19.00/hour and increases with experience.
ESSENTIAL JOB FUNCTIONS
- Makes rounds to resident rooms at least every two hours to ensure resident needs are met to include toileting, turning, repositioning, and hydration; makes walking rounds at shift change with the oncoming CNA ensuring resident rooms are tidy and in good condition; communicates any pertinent changes or things that are occurring with the residents during walking rounds ensuring a seamless transition of care; checks the care base, country kitchen, and soiled and clean utility rooms during walking rounds for tidiness; issues found during rounds will be addressed by the off-going shift
- Observes unusual symptoms or signs of illness or skin breakdown and reports same to nurse in charge; reports indications of residents’ deteriorating physical, emotional, or mental health through the utilization of the Interact Stop and Watch documents
- Listens to change of shift report and communicates with charge nurse on what shift priorities should be
- Provides care in accordance with the resident care profile and resident preferences
- Administers bed baths daily and showers twice per week unless resident requests otherwise
- Distributes and sets up resident meal trays; assists the residents who need assistance with their meals, encourage intake, and accurately document intake
- Provides daily and weekly personal care including oral hygiene, fingernail trimming, dressing daily and throughout the day as needed, assisting with toileting or changing throughout the day as needed
- Positions residents properly using comfort and safety devices as ordered; repositions bedridden residents every two hours or more often as directed
- Takes vital signs according to resident plan of care or as assigned by supervising charge nurse
- Assists with bladder and bowel training of selected incontinent residents
- Makes rounds of incontinent residents every two hours to provide partial bathing and change of clothing and linen as needed; cleans carpet or furniture if needed and notifies Housekeeping for sanitation
- Answers resident call lights in a timely manner, politely, and with focused concern on the resident; maintains a goal of answering each call light in under four minutes
- Answers the phones located at the care base or nurses station when appropriate; provides professional and courteous direction to the party on the phone
- Assists with the admission and discharge of resident and post mortem care
- Completes the shift responsibility checklist for the specific shift assigned
- Assists with weighing of residents on admission, once a month, and as ordered; if weight is greater than set parameters, reports weight change to the nurse
- Assists residents in the use of adaptive equipment including splints, adaptive plates, bowls, cups and utensils, reachers, sliding boards, walkers and wheelchairs
- Appropriately addresses all allegations or sightings of potential abuse/neglect by rescuing the resident, reporting it immediately and reassuring the resident
- Empties urinary drainage bags twice per shift, and totals output for nurse in charge; passes, empties, and sanitizes bedpans and urinals as needed
- Makes sure residents’ clothing is clean, puts soiled clothing in hamper and puts away clean laundry
- Assures overall neatness and cleanliness of resident’s room, bedside equipment, and bathroom; makes beds and returns clothing and equipment to proper place
- Participates in mandatory in-services/drills
- Serves an active role in actual Emergency Operations scenarios to ensure the safety of the residents
- Assists with transportation of residents to and from activities; involves residents in daily activities when time allows; engages residents in one on one activities as part of daily routine
- Assists with moving a resident from one room to another including bed/mattress and personal belongings
- Accurately documents care provided to assigned residents using MyUnity Point of Care daily prior to leaving for the day
- Performs all work in a safe manner; reports any safety hazards to the Charge Nurse immediately including improper disposal of medications and “sharps;” uses safe lifting and transfer techniques and proper body mechanics at all times; complies with emergency drills; maintains infection control standards
- Reports damaged or unsafe equipment to the Charge Nurse while discontinuing the utilization of the piece of equipment; clearly labels the equipment as faulty so that no other employee uses it
- Maintains a positive attitude to ensure dignity and quality of life for residents, and maintains positive interaction with guests and coworkers
- Serves as a positive mentor for new staff members, training them in the proper policies and procedures to ensure quality of care
- Performs all other duties as assigned
KNOWLEDGE, SKILLS AND ABILITIESAbility to perform duties in accordance with accepted methods and techniques necessary in providing optimal care; ability to communicate effectively in English both verbally and in writing; ability to assist other licensed personnel as needed; ability to regularly and safely lift a minimum of 50 pounds; ability to use a variety of health care equipment such as lifts, thermometer, and blood pressure cuff; ability to stand and walk for long period
BENEFITS (Full-Time and Part-Time Plus employees)
· Health, Dental & Vision Insurance
· FSA & HSA
· 403(b) Retirement Plan*
· 529 College Savings Plan*
· Long-Term Care Insurance
· Legal Resources
· Paid Time Off
· Holiday Pay*
· Corporate Wellness Program*
· Health Club & Spa Membership*
· Employee Education & Training Fund*
· Employee Assistance Program
· Credit Union Membership*
* Part-Time employees eligible
Williamsburg Landing is a non-profit, independent community offering a vibrant lifestyle for residents.
Apply online at .
EOE/Tobacco Free/Drug Free
Requirements:
PIa7b6a675939e-38
The Certified Nursing Assistant (CNA), under the direction and supervision of the Director of Nursing and/or the assigned charge nurse, provides individualized care to residents to include routine daily care, promoting maximum independence, safety, and comfort for each resident.
*Full Time, Part Time Plus and Part Time options available.
Starting hourly rate is $19.00/hour and increases with experience.
ESSENTIAL JOB FUNCTIONS
- Makes rounds to resident rooms at least every two hours to ensure resident needs are met to include toileting, turning, repositioning, and hydration; makes walking rounds at shift change with the oncoming CNA ensuring resident rooms are tidy and in good condition; communicates any pertinent changes or things that are occurring with the residents during walking rounds ensuring a seamless transition of care; checks the care base, country kitchen, and soiled and clean utility rooms during walking rounds for tidiness; issues found during rounds will be addressed by the off-going shift
- Observes unusual symptoms or signs of illness or skin breakdown and reports same to nurse in charge; reports indications of residents’ deteriorating physical, emotional, or mental health through the utilization of the Interact Stop and Watch documents
- Listens to change of shift report and communicates with charge nurse on what shift priorities should be
- Provides care in accordance with the resident care profile and resident preferences
- Administers bed baths daily and showers twice per week unless resident requests otherwise
- Distributes and sets up resident meal trays; assists the residents who need assistance with their meals, encourage intake, and accurately document intake
- Provides daily and weekly personal care including oral hygiene, fingernail trimming, dressing daily and throughout the day as needed, assisting with toileting or changing throughout the day as needed
- Positions residents properly using comfort and safety devices as ordered; repositions bedridden residents every two hours or more often as directed
- Takes vital signs according to resident plan of care or as assigned by supervising charge nurse
- Assists with bladder and bowel training of selected incontinent residents
- Makes rounds of incontinent residents every two hours to provide partial bathing and change of clothing and linen as needed; cleans carpet or furniture if needed and notifies Housekeeping for sanitation
- Answers resident call lights in a timely manner, politely, and with focused concern on the resident; maintains a goal of answering each call light in under four minutes
- Answers the phones located at the care base or nurses station when appropriate; provides professional and courteous direction to the party on the phone
- Assists with the admission and discharge of resident and post mortem care
- Completes the shift responsibility checklist for the specific shift assigned
- Assists with weighing of residents on admission, once a month, and as ordered; if weight is greater than set parameters, reports weight change to the nurse
- Assists residents in the use of adaptive equipment including splints, adaptive plates, bowls, cups and utensils, reachers, sliding boards, walkers and wheelchairs
- Appropriately addresses all allegations or sightings of potential abuse/neglect by rescuing the resident, reporting it immediately and reassuring the resident
- Empties urinary drainage bags twice per shift, and totals output for nurse in charge; passes, empties, and sanitizes bedpans and urinals as needed
- Makes sure residents’ clothing is clean, puts soiled clothing in hamper and puts away clean laundry
- Assures overall neatness and cleanliness of resident’s room, bedside equipment, and bathroom; makes beds and returns clothing and equipment to proper place
- Participates in mandatory in-services/drills
- Serves an active role in actual Emergency Operations scenarios to ensure the safety of the residents
- Assists with transportation of residents to and from activities; involves residents in daily activities when time allows; engages residents in one on one activities as part of daily routine
- Assists with moving a resident from one room to another including bed/mattress and personal belongings
- Accurately documents care provided to assigned residents using MyUnity Point of Care daily prior to leaving for the day
- Performs all work in a safe manner; reports any safety hazards to the Charge Nurse immediately including improper disposal of medications and “sharps;” uses safe lifting and transfer techniques and proper body mechanics at all times; complies with emergency drills; maintains infection control standards
- Reports damaged or unsafe equipment to the Charge Nurse while discontinuing the utilization of the piece of equipment; clearly labels the equipment as faulty so that no other employee uses it
- Maintains a positive attitude to ensure dignity and quality of life for residents, and maintains positive interaction with guests and coworkers
- Serves as a positive mentor for new staff members, training them in the proper policies and procedures to ensure quality of care
- Performs all other duties as assigned
QUALIFICATIONSValid certification as a Nurse Aide from the Commonwealth of Virginia; prior work experience as Nurse Aide, preferred; CDP (Certified Dementia Practitioner) designation and completion of Agape CNA Skills Review, required within the first 90 days of employment
KNOWLEDGE, SKILLS AND ABILITIESAbility to perform duties in accordance with accepted methods and techniques necessary in providing optimal care; ability to communicate effectively in English both verbally and in writing; ability to assist other licensed personnel as needed; ability to regularly and safely lift a minimum of 50 pounds; ability to use a variety of health care equipment such as lifts, thermometer, and blood pressure cuff; ability to stand and walk for long period
BENEFITS (Full-Time and Part-Time Plus employees)
· Health, Dental & Vision Insurance
· FSA & HSA
· 403(b) Retirement Plan*
· 529 College Savings Plan*
· Long-Term Care Insurance
· Legal Resources
· Paid Time Off
· Holiday Pay*
· Corporate Wellness Program*
· Health Club & Spa Membership*
· Employee Education & Training Fund*
· Employee Assistance Program
· Credit Union Membership*
* Part-Time employees eligible
Williamsburg Landing is a non-profit, independent community offering a vibrant lifestyle for residents.
Apply online at .
EOE/Tobacco Free/Drug Free
Requirements:
PI95d18e390e0f-362