Capgemini Senior Software Engineer Salary Leetcode Jobs in Usa

Job Opportunity - Software Lead

Location : Mountain View, CA

Duration : Full-Time

Job Summary:

We are seeking an experienced Senior Embedded Software Engineer with a strong background in automotive software development, particularly in telematics and infotainment systems. The ideal candidate will have deep expertise in non-AUTOSAR platforms, low-level embedded development, and hands-on experience with microcontrollers from NXP and Infineon.

Key Responsibilities

• Design, develop, and integrate embedded software for automotive applications, focusing on telematics and infotainment systems.
• Work on non-AUTOSAR platforms, including development of:
• Bootloaders
• Diagnostics (UDS, CAN, etc.)
• Peripheral drivers
• BSP (Board Support Package) integration
• Develop telematics applications using Embedded C on microcontroller-based systems.
• Interface with hardware teams to ensure seamless integration of software with ECU platforms.
• Perform debugging, root cause analysis, and issue resolution across software layers.
• Ensure compliance with automotive standards and best practices for quality and reliability.
• Collaborate with cross-functional teams (hardware, system, validation) throughout the product lifecycle.
• Support system validation, testing, and release activities.

Required Qualifications

• Bachelor’s or Master’s degree in Electronics, Computer Science, or related field.
• Minimum 15 years of experience in automotive embedded software development.
• At least 2 years of hands-on experience in infotainment or telematics systems.
• Strong expertise in Embedded C programming.
• Proven experience working on non-AUTOSAR platforms.
• Hands-on experience with:
• Bootloader development
• Diagnostics protocols (UDS, CAN)
• Low-level driver development
• BSP integration
• Experience with NXP and Infineon microcontrollers.

** Please note that this is an on-site position without remote capability. This position requires travel between multiple sites. **

About IT at Cambridge Health Alliance (CHA)

The Information Technology Department at Cambridge Health Alliance empowers high-quality, equitable, and patient-centered care through innovative and secure health IT solutions. Grounded in CHA’s mission and strategic plan, IT supports clinical, operational, and academic excellence by providing reliable infrastructure, safeguarding health information, and enabling data-driven decision-making. With a future-focused approach, the team works to enhance access, advance health equity, and drive innovation across the system.

Position Overview

Reporting to the Director, Network & Telecommunications, the Senior Network Engineer serves as the principal technical authority for the Cambridge Health Alliance enterprise voice and data network. This role entails the coordination of all network implementations, modifications, and maintenance, ensuring stringent alignment with the overall enterprise design. The incumbent will function as a senior engineer to LAN, WAN, and Cableplant engineers and technicians, thereby fostering high-quality, patient-centered care through the deployment of secure and innovative health IT solutions.

Key Responsibilities

• Conduct research and furnish recommendations for strategically appropriate support tools and systems, including network management platforms, traffic analysis solutions, and retrospective/prospective projection modeling.
• Lead the configuration, installation, implementation, and advanced troubleshooting of micro-segmentation, routers, switches, wireless controllers and infrastructure, and other critical communication devices.
• Systematically monitor response times, bandwidth utilization, and resource availability to propose and implement performance enhancements. Utilize specialized surveying tools to optimize coverage and capacity within high-density environments.
• Design and administer the IP address scheme and associated IP address assignment mechanisms.
• Design, deploy, and maintain robust enterprise wireless networks, including the execution of site surveys and comprehensive RF planning.
• Configure and troubleshoot wireless access points (APs) and wireless LAN controllers (WLCs).
• Ensure the integrity and security of the wireless network through the implementation of WPA2/3 protocols, and RADIUS integration. Proven hands-on experience implementing Network Access Control (NAC) solutions.
• Resolve complex and atypical network problems, employing advanced packet capture and protocol analysis tools such as Wireshark.
• Monitor and coordinate the maintenance of network hardware and software to ensure maximum operational efficiency and uptime.
• Maintain up-to-date, meticulously detailed network topological diagrams and documentation for the entire CHA network and all business partner connections.

Technical Requirements & Qualifications

Education, and Experience

• Bachelor’s Degree in Computer Science, Engineering, or a closely related field is required; equivalent significant professional experience (e.g., a minimum of 6 years total experience) may be substituted.
• A minimum of 7-10 years of progressive experience in network engineering within an enterprise environment is mandatory, with at least 5 years served in a Senior Network Engineering role.
• Experience within a large, distributed, and complex healthcare organization is highly desirable.

Technical Knowledge

• Demonstrated hands-on experience with Juniper, Aruba.
• Advanced and comprehensive knowledge of OSPF, EIGRP, BGP, RIP, RIPv2, TCP/IP, UDP, ICMP, EVPN-VXLAN and 802.1x standards.
• Deep understanding and practical application of VLANs, data/voice trunking, Spanning Tree Protocol (STP), Link Aggregation Group (LAG), and layer 2/3 fault tolerance design.
• Proficiency in the configuration and management of Access Control Lists (ACLs), Firewalls, Virtual Private Networks (VPNs), and Network Access Control (NAC) solutions and wireless security.

Certifications (Desired)

• Juniper Networks Certified Professional - Service Provider (JNCIP-SP) or Juniper Networks Certified Professional - Enterprise (JNCIP-ENT)
• Aruba Certified Mobility Professional (ACMP)
• CompTIA Network+ or Security+
• Certified Wireless Network Professional (CWNP) certifications (CWNA, CWAP, CWDP)

Working Conditions and Physical Demands

• Mandatory rotating 24/7 on-call support is required, necessitating a 30-minute remote response time or a 1-hour on-site response time.
• Must possess reliable personal transportation to facilitate travel between multiple sites.

Please note that the final offer may vary within the listed Pay Range, based on a candidate's experience, skills, qualifications, and internal equity considerations.

Location: CHA Somerville Campus

Work Days: Monday - Friday, 8:30am - 5:00pm, On-call Rotation

Department: IT CHA Network

Job Type: Full time

Work Shift: Day

Hours/Week: 40

Union Name: Non-Union

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Mechanical) at Reliable Robotics, you'll play a critical role in developing and continuously improving all aspects of our manufacturing, installation, and supply chain processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for designing the build and installation process for mechanical, electromechanical, and/or electrical/avionics products, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes automated aviation systems from prototype to production in a hands-on environment.

Responsibilities

• Responsible for building, installing, testing, diagnosing, inspecting, and maintaining Reliable-designed mechanical, electromechanical, and/or electrical/avionics assemblies, harnesses, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, and engineering change orders

• Develop processes to ensure accurate, current, and complete documentation (work instructions, inspections, tests, records, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, or systems engineering

• 7+ years of manufacturing, design, and/or testing experience

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Research and Development (R&D) or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Previous leadership or management experience

• Prior experience in troubleshooting, repairing, setting up, and operating complex hardware in a safety-critical environment

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Mountain View, California.

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Aircraft Integration) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment.

Responsibilities

• Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management systems, technical bulletins, engineering orders, service bulletins, and airworthiness directives

• Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

• Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained

Basic Success Criteria

• Bachelor's Degree in Mechanical, Electrical, Aerospace, Systems Engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations

• 7+ years of aircraft design, manufacturing, inspection, and/or testing experience

• 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Success Criteria

• Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate

• Prototype/R&D development or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems

• Maintenance and rigging experience on P&W PT6A Engines/Airframes

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The position will be located at our facility in Albuquerque, NM, but will require frequent travel to San Martin, California.

Must be willing to travel 30% of the time (primarily training in San Martin, CA).

The estimated salary range for this position is $135,000 to $190,000. At Reliable Robotics, we strive to provide competitive and rewarding compensation based on experience and expertise, as well as market conditions, location, and pay equity.

In addition to base compensation, Reliable Robotics offers stock options, employee medical, 401k contribution, great co-workers, and a casual work environment.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $135K - $190K

We're building safety-enhancing technology for aviation that will save lives. Automated aviation systems will enable a future where air transportation is safer, more convenient and fundamentally transformative to the way goods - and eventually people - move around the planet. We are a team of mission-driven engineers with experience across aerospace, robotics and self-driving cars working to make this future a reality.

As a Sr. Manufacturing Engineer (Aircraft and Maintenance) at Reliable Robotics, you'll play a critical role in developing and continuously improving our manufacturing, installation, and maintenance processes to meet design, regulatory, and business requirements (including safety, quality, cost, and on-time delivery). This is a growing team of highly motivated people who are passionate about delivering quality products and services on time, with unquestionable value. You will be responsible for our automation system's installation and maintenance, including hands-on installations, procedure development, documentation, conducting design for excellence (DFx) reviews, and developing the processes and infrastructure to help the business scale. The projects you work on will set the foundation for how the business operates for years to come. This is a fantastic opportunity to work in a safety-critical environment that takes our products from prototype to production, in a hands-on environment.

Responsibilities

• Responsible for installation, inspection, maintenance, repair, modification, testing, and fabrication of the Reliable-designed mechanical, electromechanical, and electrical/avionics assemblies, harnessing, interconnects, and other commercial-off-the-shelf (COTS) products

• Conduct design for excellence (DFx) reviews to evaluate designs for cost, producibility, inspectability, consistency, adequacy, accuracy, and conformance to requirements

• Collaborate with design, quality, and certification teams to embed manufacturability, compliance, and risk mitigation in all phases of product development (e.g., prototype, R&D, certification, and production)

• Develop and ensure compliance with all policies, procedures, quality management system, technical bulletins, engineering orders, service bulletins, and airworthiness directives

• Develop processes to ensure accurate, current, and complete documentation (installation and inspection records, logbook entries, etc.) is utilized and maintained

• Lead root-cause analysis and implement timely corrective actions to maintain schedule, quality, and reliability

• Ensure an adequate supply of tools, serviceable parts, components, and consumables necessary for aircraft servicing and maintenance is maintained

• Oversee routine/non-routine aircraft installations, inspections, and maintenance to ensure aircraft safety and availability across multiple airframes

Basic Success Criteria

• Bachelor's degree in mechanical, electrical, aerospace, systems engineering, or 7+ years of relevant experience leading aircraft maintenance/modification operations

• 7+ years of aircraft design, manufacturing, inspection, and/or testing experience

• 2+ years of experience leading complex projects or programs in aerospace, autonomy, or robotics

• 2+ years of experience with computer-aided design (CAD) and Product Lifecycle Management (PLM) software, such as Altium, NX, and Teamcenter

Preferred Criteria

• Holder of an FAA-accredited Airframe & Powerplant (A&P) Certificate

• Prototype/R&D development or New Product Introduction (NPI) experience

• Experience with industry or regulatory requirements such as AS9100, CFR 14 CFR 21.137, and/or 14 CFR Part 145

• Knowledge of highly complex medium to heavy turbine-powered aircraft, their powerplants, flight and stabilization controls, pneumatic, fuel systems, electronic engine, hydraulic, and navigation systems

• Maintenance and rigging experience on P&W PT6A Engines/Airframes

• Previous leadership or management experience

Our team is passionate about delivering on our commitments, solving hard problems, continuously improving, and helping the business succeed. We are constantly reevaluating our technologies, products, and capabilities. If you are a lifelong learner, you will love this environment. Get in on the ground floor and help us build the company.

The location for this position will be split between at our facility in San Martin, California (50%) and our HQ in Mountain View, CA (50%).

Must be willing to travel 10% of the time.

This position requires access to information that is subject to U.S. export controls. An offer of employment will be contingent upon the applicant's capacity to perform in compliance with U.S. export control laws.

All applicants are asked to provide documentation that legally establishes status as a U.S. person or non-U.S. person (and nationalities in the case of a non-U.S. person). Where the applicant is not a U.S. person, meaning not a (i) U.S. citizen or national, (ii) U.S. lawful permanent resident, (iii) refugee under 8 U.S.C. * 1157, or (iv) asylee under 8 U.S.C. * 1158, or not otherwise permitted to access the export-controlled technology without U.S. government authorization, the Company reserves the right not to apply for an export license for such applicants whose access to export-controlled technology or software source code requires authorization and may decline to proceed with the application process and any offer of employment on that basis.

At Reliable Robotics, our goal is to be a diverse and inclusive workforce. As an Equal Opportunity Employer, we do not discriminate on the basis of race, religion, color, creed, ancestry, sex, gender (including pregnancy, childbirth, breastfeeding, or related medical conditions), gender identity, gender expression, sexual orientation, age, non-disqualifying physical or mental disability or medical conditions, national origin, military or veteran status, genetic information, marital status, or any other basis covered by applicable law. All employment and promotion is decided on the basis of qualifications, merit, and business need.

If you require reasonable accommodation in completing an application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to

Compensation Range: $167K - $230K

Senior FPGA Engineer

Delta Information Systems is seeking a hands-on Senior FPGA Engineer with strong RF communications and DSP experience under our GDP division to design and develop real-world aerospace telemetry hardware.

Job Overview

This role focuses on FPGA/DSP design for RF receivers, taking designs from MATLAB modeling through FPGA implementation, board bring-up, and system integration. You’ll work on mission-critical products used in flight test, missile test, range safety, and space applications.

This is a hardware focused engineering role, not a software only position. Candidates should have hands-on FPGA and board-level experience.

This is an onsite position located in Horsham, PA. Hybrid option may be considered. No employer visa sponsorship is available.

Responsibilities

• FPGA/DSP design and debug for telemetry RF receivers
• VHDL-based FPGA design, simulation, and verification
• MATLAB modeling to support DSP and system architecture
• Board-level development, PCB oversight, and lab bring-up
• Integration of embedded CPU and FPGA designs
• Cross-functional collaboration with engineering and marketing
• Documentation: requirements, test plans, design reviews
• Jira-based issue tracking and design reviews

Qualifications

• BS in Electrical Engineering
• 5+ years in DSP-based product development
• Hands-on FPGA design experience (VHDL)
• RF receiver signal processing experience
• Familiarity with modulation schemes (PCM/FM, SOQPSK)
• Familiarity with FEC techniques (LDPC, Viterbi)
• FPGA simulation + MATLAB experience
• Lab experience with test equipment
• Embedded C/C++ a plus
• U.S. Persons Only (ITAR/EAR)

This position may require exposure to information, which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be “U.S. persons” within the meaning of U.S. regulations.

Compensation

• Salary Range: $135,000-$165,000 (based on experience)
• 100% PAID COVERAGE for Medical, Dental, and Vision for the Employee and Dependents
• 401(k) Employer Match
• Employee Stock Ownership Program (company funded)
• Life Insurance (company funded)
• Short-Term Disability (company funded)
• Long-Term Disability (company funded)
• 80 hours (Vacation)
• 40 hours (Sick Leave)
• 11 days (Paid Holidays
• HealthCare FSA
• Dependent Care FSA

What We Offer

• Opportunities for training, certifications, and career growth.
• A mission-driven culture where your work contributes to national security.
• Exposure to advanced technologies and programs critical to the aerospace and defense sector.

Why Join Delta

• 50+ years in aerospace telemetry
• Engineers own designs end-to-end
• Small, experienced team with minimal bureaucracy
• Hardware that ships, flies, and is used in the field

About Delta Information Systems, Inc.®

Delta Information Systems (DIS) is an industry-leading supplier of high-quality aerospace telemetry products for Flight Test, Missile Test, Range Safety, Launch Support and Satellite Command and Control applications. Their products address the complete telemetry chain from Data Acquisition, Storage, Transport and Distribution to Telemetry Processing and Display. DIS customers include all DoD entities, all Major Primes, Integrators, Gov Labs, Aircraft & Missile Manufacturers, & Launch Facilities.

In addition, Delta Information Systems (DIS) designs and develops sophisticated electronic equipment that is specifically designed to reliably operate in harsh environments. They deliver critical video communications capability for manned and unmanned Intelligence, Surveillance and Reconnaissance (ISR) programs.

Job Title:

Sr Designer / Engineer - STRAY Production Services Systems Integration 

Job Parameters:

• Reports to VP of Systems Integration 

• Full-Time hourly position with an average of 40hr/week 

• Standard schedule is 8:00a–5:00p, Monday–Friday, with in-office work as the default. A flexible option of 7:00a–5:00p, Monday–Thursday, may be arranged as needed.

• Work in alignment with STRAY values, behaviors and company handbook

-Solutions Unique to You, Service Unique to Us

- Stewardship, Teamwork, Relationships, Accountability, “Yes”

• Participation in all team and company meetings 

• Provide coaching and support to Jr Designers and Engineers

• Engage with the greater Rock Lititz community to build relationships with others in similar roles

Skills and Traits:

• Communicates clearly and promptly with both clients and teammates
• Shares knowledge freely to strengthen team-wide understanding
• Pursues growth through ongoing learning and skill development
• Maintains a positive, solutions-focused outlook
• Builds lasting client relationships through care and consistency
• Acts with personal integrity in all interactions
• Takes ownership from start to finish, upholding STRAY standards
• Uses time, tools, and resources efficiently and responsibly
• Proficient in 2D/3D platforms including Vectorworks
• Advanced in Q-SYS system and UI design
• Experienced in AVL systems, networking, and control infrastructure
• Produces clear, standards-based deliverables tailored to end users

Job Description:

The Sr Designer and Engineer is responsible for translating the intent and scope of sold projects to which they are assigned into three key components:

• Executable Designs 
• Translate project intent into solutions that are highly functional and aligned with client goals
• Apply creativity within constraints to ensure designs meet standards while being practical
• Collaborate with sales and PMs to ensure designs reflect real project budgets and timelines
• Build with the end user in mind—simple control of serious capability 
• Use proven standards while adapting to unique client requirements

• Accurate Drawings 
• Deliver drawings that are easy to follow for installers, trades, and technicians
• Minimize ambiguity with consistent STRAY standard labeling and formatting
• Ensure a reliable workflow for revision so teams always have most current plans
• Standardize where possible—but adapt where needed to client-specific or space-specific demands
• Drive efficiency in the field by keeping the installer in mind when drawing
• Do the above within a structure for keeping due dates and “do dates” clear

• Quality Deployments
• Deploy clean, intuitive UX/UI that delivers control without confusion that has been verified by client
• Commission systems thoroughly to ensure performance matches design intent
• Own the final step: walking clients through how to use and love what’s been delivered
• Maintain flexibility during install and commissioning to respond to real-world variables
• Ensure the finished system reflects the STRAY vision and values in the handoff to the client

This role is also responsible for the development and optimization of the software, processes and tools in use within the department towards continued growth specifically within the following platforms:

• Jetbuilt
• Vectorworks
• Asana
• Q-SYS
• Cloud Storage / Data and Resource Management

Statement of Success:

Success in this role will be evident through consistent, high-quality outcomes across the entire Systems Integration team; from pre-sales engineering through final commissioning..  Clients will receive the solution they were promised—no matter the size or complexity of the project.

Team Lead Staff Software Engineer

Location: Hybrid - American Fork, UT

Our client is seeking a Team Lead Staff Software Engineer to join their engineering team supporting innovative cloud-based dental technology platforms. Do you enjoy solving complex backend engineering challenges using Java and modern cloud technologies? Are you passionate about mentoring other engineers while still staying hands-on with code? Do you want to influence system architecture and help scale a high-impact SaaS platform used by dental professionals? If yes, this may be the perfect Team Lead Staff Software Engineer position for you. Keep scrolling to see what this company has to offer.

The Perks!

• Compensation: $130,000 – $165,000 salary, based on experience
• Benefits: Medical, Dental, and Vision Coverage, 401(k) Plan with Company Match, Paid Time Off, Sick Leave, Paid Parental Leave, Short Term Disability, Income Protection, Work Life Assistance Program, Health Savings and Flexible Spending Accounts, Education Benefits
• Additional Perks: Worldwide Scholarship Program, Volunteer Opportunities, and opportunities for professional growth in the healthcare technology industry

A Day in the Life of the Team Lead Staff Software Engineer

In this role, you’ll help shape the future of our client’s cloud-based dental platform, including their flagship product. You’ll work closely with engineering leadership, product managers, and cross-functional teams to design and build secure, scalable features while mentoring other developers. This position blends deep technical contribution with early leadership responsibilities, offering a clear path toward technical or people management roles.

Responsibilities include:

• Lead the technical design and development of new and existing finance-related features within the Dentrix Ascend platform
• Develop clean, efficient, and maintainable Java code using Spring Boot while following Test-Driven Development (TDD) and clean architecture principles
• Apply advanced object-oriented design, SOLID principles, design patterns, and refactoring techniques to maintain high-quality codebases
• Contribute to overall system architecture with a focus on scalability, reliability, and performance under heavy usage
• Collaborate with product managers, designers, and engineering teams to translate business requirements into robust technical solutions
• Troubleshoot and resolve complex technical issues to ensure platform stability and reliability
• Mentor junior engineers and promote engineering best practices and continuous learning
• Partner with DevOps teams to support CI/CD pipelines and deployment automation
• Participate in Agile/Scrum ceremonies such as sprint planning, stand-ups, retrospectives, and code reviews
• Stay current with Java and related technologies, recommending modern tools and practices that improve product quality and team productivity

Requirements and Qualifications:

• 8+ years of experience building backend software with Java and Spring Boot, including enterprise-level application development
• Prior experience designing or working with microservices and modern software architecture patterns
• Previous experience supporting the team and guiding technical decisions as a team lead or technical lead
• Experience working with large language models (LLMs) or AI tools for generating, interpreting, or improving codebases
• Prior experience mentoring engineers or provided technical leadership while maintaining strong communication across the team
• Excellent communication and collaboration skills
• Passion for building high-quality software and enabling team success
• Bachelor’s degree in a related field

About the Hiring Company:

Our client develops cloud-based software designed to help dental professionals manage and grow their practices. Their flagship platform delivers modern practice management tools that improve efficiency, patient experience, and operational insight. The company focuses on innovation, scalability, and empowering healthcare professionals through technology.

Come Join Our Engineering Team!

Start by filling out this 3-minute, mobile-friendly application here. We look forward to hearing from you!

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

The Boeing Company is currently seeking a Lead Software Engineer – DevSecOps to support our Phantom Works Virtual Warfare Center team located in Berkeley, MO. This position will focus on supporting the Boeing Defense, Space & Security (BDS) business organization.

The DevSecOps Lead Engineer will architect and implement secure development and execution environments for the rapid prototyping and experimentation we use to answer our customers’ toughest questions about future technologies and capabilities. The Virtual Warfare Center executes far-reaching analysis to address military capability gaps in and across multiple warfighting domains in the face of accelerating adversary capabilities. In DevSecOps you will be part of a team modernizing our approach to software development and enhancing our security posture.

As the Virtual Warfare Center’s DevSecOps Team Lead you will lead a team of engineers designing, implementing, and monitoring software development infrastructure across multiple networks and physical locations across the United States. You will build and maintain cross-functional relationships with multiple teams to coordinate the selection, approval, deployment, and maintenance of a consistent set of software tools in all locations. Your work will guarantee our development and deployment infrastructure and processes are reliable, efficient, consistent, and secure. Your team will partner with relevant stakeholders to create processes, design cloud-based solutions, support deploying applications in cloud environments, evaluate solution performance and implement enhancements. You will guide the team through the update of a legacy software development infrastructure to use modern technologies including containers, cloud, high performance computing, AI/ML, and automation. This position requires mentoring early-career employees on DevSecOps design, implementation, maintenance, communication, and leadership skills. Your team will track required software updates and drive the process to eliminate known vulnerabilities including monitoring systems, tools, and software packages for security vulnerabilities. You will contribute to a collaborative, cross-functional team managing software security approvals and automate the integration of security into all phases of the software development lifecycle. Your work with an array of software development, IT, and cybersecurity teams will address emergent issues while improving the efficiency and usability of our systems and software products.

Position Responsibilities:

• Lead a team of engineers responsible for designing, installing, configuring, and maintaining a consistent, secure software development toolchain across multiple networks and physical locations.
• Spearhead the approval and implementation of continuous integration and continuous deployment pipelines into collateral secret and program spaces.
• Coordinate between software development, IT, and security teams on vulnerability tracking and mitigation, driving efforts forward.
• Architect and implement the transition of a multi-site, multi-network software development environment into a cloud-based approach.
• Lead trade studies and tool selection to upgrade and modernize software development processes and operational infrastructure.
• Lead implementation of best practices and methodologies for provisioning, platform scaling, configuration management, monitoring and troubleshooting
• Maintain the DevSecOps vision and roadmap, track status, and communicate progress to stakeholders.
• Mentor and coach the team, provide technical leadership, foster a culture of knowledge sharing and continuous learning, and grow their skills.

Basic Qualifications (Required Skills/ Experience):

• Bachelor’s Degree in an engineering discipline or 17+ years equivalent related experience
• 10+ years’ experience with software engineering
• 3+ years’ experience with scripting languages such as Bash or Python
• 3+ years’ experience containerized software development
• 3+ years’ experience supporting DevSecOps lifecycle
• Experience with Agile development practices using continuous integration and deployment
• 3+ years of experience performing automation, implementation and deployments in both Windows and Linux systems
• Active Secret clearance

Preferred Qualifications (Desired Skills/Experience):

• Active Top Secret SCI clearance
• Experience with gitlab
• Experience with Jenkins
• Experience with JIRA
• 3+ years’ experience supporting cloud development environments
• Experience with cloud computing in classified environments
• CompTIA Security+
• Bachelor of Science degree from an accredited course of study in engineering, engineering technology (includes manufacturing engineering technology), chemistry, physics, mathematics, data science, or computer science.

Travel: 10%

Drug Free Workplace:

Boeing is a Drug Free Workplace (DFW) where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

CodeVue Coding Challenge:

To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration.

Pay & Benefits:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary Pay Range for Lead: $136,850 - $185,150

Applications for this position will be accepted until Mar. 25, 2026

Export Control Requirements:

This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee.

Export Control Details:

US based job, US Person required

Relocation

This position offers relocation based on candidate eligibility.

Security Clearance

This position requires an active U.S. Secret Security Clearance (U.S. Citizenship Required). (A U.S. Security Clearance that has been active in the past 24 months is considered active)

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for 1st shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.