Calibration Jobs in Usa

• Own measurement for Supply Chain root causes (charter metrics); analyze forecast bias/error vs sales, store orders vs replenishment plan, on-hand adherence to minimum stock, and inventory sufficiency to plan
• Collaborate on Supply Chain dashboards and recurring reports to deliver daily/weekly sufficiency reports by DC, planned vs actual inventory variance, and consumption/forecast consumption accuracy reporting
• Identify and quantify insufficiency drivers; analyze recurring failures across warehouses, vendors, and commodities; isolate systemic vs event-based causes (capacity constraints, vendor cuts/late deliveries, short buys/late PO release, promo lift/baseline misalignment, item setup/parameters)
• Support recovery execution forums; provide inputs for "insufficient POV & commodities" reviews, quantify OvS impacts by division, and track recovery actions (including coordination needs such as "hot loads")
• Prepare vendor/merch escalation analytics; develop evidence packages to trigger escalation mechanisms for vendor-related issues (service failures, MAP/allocation constraints, substitution/deactivation impacts)
• Support ORAD, OTIF transition; ensure new OTIF reporting logic is clean and can be ingested into the Executive Scorecard
• Support assortment/DC slotting analytics; analyze impacts of minimum store count thresholds on DC efficiency and shelf holding power
• Monitor data quality and parameter governance; identify item setup/system parameter issues and recommend controls to reduce manual overrides and improve new item forecast calibration

• Advanced Excel and Power BI skills; strong SQL proficiency; R or Python preferred
• Experience analyzing forecasting, inventory planning, replenishment, and warehouse performance metrics
• Ability to translate complex supply chain drivers into clear, actionable recommendations
• Strong data quality mindset and experience establishing measurement logic and governance controls
• Demonstrated ability to work independently and with cross-functional teams
• High level of interpersonal skills to work effectively with Supply Chain, Merchandising, and Retail Operations stakeholders

About Matlen Silver

Experience Matters. Let your experience be driven by our experience. For more than 40 years, Matlen Silver has delivered solutions for complex talent and technology needs to Fortune 500 companies and industry leaders. Led by hard work, honesty, and a trusted team of experts, we can say that Matlen Silver technology has created a solutions experience and legacy of success that is the difference in the way the world works.

 

Matlen Silver is an Equal Opportunity Employer and considers all applicants for all positions without regard to race, color, religion, gender, national origin, age, sexual orientation, veteran status, the presence of a non-job-related medical condition or disability, or any other legally protected status.

If you are a person with a disability needing assistance with the application or at any point in the hiring process, please contact us at email and/or phone at: // 9

At The Matlen Silver Group, Inc., W2 employees are eligible for the following benefits:

• Health, vision, and dental insurance (single and family coverage)
• 401(k) plan (employee contributions only)

We are seeking an experienced Facility Manager to oversee equipment reliability, maintenance, and facility operations. This hands-on role reports directly to senior leadership and includes leading a team within the maintenance department.

Responsibilities:

• Oversee facility operations, maintenance, and equipment reliability.
• Support installation, startup, calibration, and commissioning of new equipment.
• Lead a team in day-to-day operations and technical troubleshooting.
• Coordinate with senior leadership on operational planning and technical decisions.
• Ensure electrical and mechanical infrastructure upgrades are completed efficiently and safely.

Qualifications:

• 3+ years of supervisory experience within an industrial manufacturing setting.
• Proven hands-on experience in facility or plant operations, maintenance, or equipment management.
• Strong mechanical and electrical troubleshooting skills, experience with PLCs and CNC equipment is a plus.
• Demonstrated ability to manage capital equipment installations and upgrades.
• U.S. citizen or green card holder

Job description:

POSITION OVERVIEW:

We are seeking a skilled and detail-oriented UV Print Machine Operator to support fabrication operations in Faribault, MN. This role is critical to producing high-quality printed components using UV-curable inks on various substrates. The UV Print Machine Operator will be responsible for machine setup, material handling, print quality verification, and maintaining production standards while adhering to safety and operational procedures.

RESPONSIBILITIES AND ESSENTIAL DUTIES:

• Set up and prepare UV printing machines by loading inks, calibrating print heads, and adjusting machine settings
• Load and align substrates (metal, plastic, glass, or other materials) for accurate printing
• Operate UV print equipment to apply inks according to customer specifications
• Program automated machinery using computer-based instructions
• Inspect printed materials for color accuracy, resolution, and overall quality
• Monitor feeding, printing, and racking processes to detect malfunctions and make adjustments
• Perform routine maintenance including cleaning print heads and replacing consumables
• Manage color profiles to ensure consistent color reproduction
• Organize and schedule print jobs to meet production deadlines
• Record production data, scrap reports, machine settings, and maintenance activities in Epicor
• Monitor material inventory to ensure continuous printer operation
• Follow Standard Operating Procedures (SOPs) and safety protocols
• Support continuous improvement initiatives to enhance efficiency and reduce cycle time
• Collaborate with supervisors, quality control, and design teams to meet customer requirements
• Perform other duties as assigned

MINIMUM REQUIREMENTS:

Basic Qualifications

• High School Diploma or equivalent
• 2+ years of manufacturing experience
• Minimum 3 months of experience operating a UV printer in a manufacturing environment
• Ability to read, write, and comprehend plant directives in English
• Strong attention to detail and accuracy
• Ability to lift and move materials up to 50 lbs
• Ability to safely operate machinery and visually inspect finished products

Preferred Qualifications

• Technical education or vocational training in printing, graphic arts, or related field
• Proficiency operating UV print machines and related software
• Knowledge of color management and print calibration techniques
• Basic maintenance and troubleshooting experience
• Basic computer skills with accurate data entry experience
• Ability to perform simple shop math and interpret process sheets and SOPs
• Understanding of blueprints, mechanical assembly, or electrical assembly

Automation Engineering Technician

Location: Smyrna, TN (Technical Logistics Center)

Asurion, the global leader in technology support and protection. Innovation and dedication to delighting customers has made it the preferred provider of technology protection to the world’s largest wireless carriers, trusted retailers and popular device manufacturers. Asurion’s 17,000 global employees support its 280 million consumers with an award-winning experience delivered through products and services that have set the standard in the industry.

Role Summary

The Automation Engineering Technician is a key technical expert responsible for the deployment, maintenance, and optimization of automated solutions within Asurion’s Supply Chain network. This role bridges the gap between high-level engineering design and daily operational execution. You will ensure that automated systems—including robotics, vision systems, and conveyance—operate at peak efficiency to drive productivity, reduce costs, and support New Product Introductions (NPI).

Key Responsibilities

Technical Operations & Maintenance

• System Upkeep: Execute general maintenance, fabrication (jigs/tooling), and repairs on automated equipment to ensure safety, and maximum up time.
• Preventive Care: Research OEM manuals to develop and execute Preventive Maintenance (PM) tasks, calibrations, and ESD checks in compliance with QMS and safety standards.
• Performance Monitoring: Track and report on key metrics such as Overall Equipment Effectiveness (OEE), Units Per Hour (UPH), availability, and yield.
• NPI Support: Participate in the installation, relocation, and testing of new hardware and software deployments.

Engineering Support & Process Improvement

• Troubleshooting: Lead root cause analysis and Level 3 technical support for complex system malfunctions, escalating to senior engineering staff when necessary.
• Continuous Improvement: Identify and implement opportunities for process enhancements, utilizing data to influence decision-making and operational strategy.
• Documentation: Create and maintain high-quality engineering reports, Work Instructions (WI), Job Aids (JA), and FMEA documentation.
• Operational Readiness: Support Automation Engineers in developing business cases, tracking CAPEX/OPEX spend, and validating projected savings.

Management & Coordination

• Inventory Control: Manage maintenance spare parts inventory (min/max levels) and oversee the organization of work areas using 5S methodologies.
• Stakeholder Collaboration: Act as a liaison between internal teams (IT, Operations, Quality) and external vendors to resolve technical issues and manage project timelines.
• Training: Facilitate knowledge transfer by training operators and other technicians on new equipment and updated safety protocols.

Qualifications & Skills

Education/Experience Minimum

• Associate degree in engineering or 2+ years of hands-on experience implementing automated solutions in a manufacturing or supply chain environment.

Technical Proficiency

• Practical knowledge of PLCs, robotics, vision systems, and conveyance.
• Experience with QMS, 5S, and Root Cause Analysis.
• Advanced skills in CAD, 2D and or 3D, MS Office (Excel & PowerPoint) for data analysis and reporting.

Core Competencies

• Strong analytical skills with the ability to interpret complex technical documents and legal/financial reports.
• Ability to work independently while fostering cross-functional collaboration.
• A "bias for action" with the ability to prioritize tasks in a fast-paced, multi-requestor environment.

Travel

• Ability to perform minimal domestic and international travel as required.

Job Title: Clinical Laboratory Scientist (CLS) – 2nd Shift

Location: San Juan Capistrano, CA

Duration: 5 Weeks (Possible Extension)

Pay: $49.50 – $55.50/hr (W2, no benefits)

Shift: Sunday–Thursday | 3:00 PM – 11:30 PM

Key Responsibilities:

• Perform moderate to complex clinical lab testing following standard procedures
• Analyze samples, validate results, and ensure accurate reporting
• Conduct quality control, calibration, and equipment maintenance
• Troubleshoot instruments and resolve technical issues
• Prepare reagents, controls, and ensure proper specimen handling
• Maintain lab safety, compliance, and documentation standards
• Train/support staff and participate in quality improvement activities

Requirements:

• 0–3 years of laboratory experience
• Bachelor’s degree in Medical Technology or related science (Required)
• Active California CLS License (Mandatory)
• Strong attention to detail and problem-solving skills
• Basic proficiency in MS Office

We work nationwide on some of the most challenging, exciting construction and maintenance projects in the industrial sector. We are currently hiring skilled first-class Welders for multiple sites in the US. If you are a hardworking person who possesses the skills and ability to perform the job as outlined below, we would love to hear from you! 

Essential Functions of this position may include but are not limited to:

• Ideal candidates will possess welding experience with GMAW, GMAW-P and SMAW
• Performs welding processes on carbon steel (OSS, HSS, HY, HSLA, etc.) assemblies to required tolerances using welding metals, metal alloys and with various joint configurations.
• Determines layouts and welds parts and assemblies according to engineering drawings and specifications.
• Oxy/Fuel pre-heat and carbon arc gouging, occasional mirror welding. Verifying weld size using weld gauges.
• Will monitor and verify quality in accordance with SSP's or MDD's.
• Requires occasional heavy lifting up to 45lbs multiple times during an 8 to 12-hour shift. 
• Requires standing and walking for extended periods during an 8 to 12-hour shift. 
• Requires occasional bending from waist, crouching, kneeling and crawling periodically during an 8-to-12-hour shift. 
• Requires occasional climbing ladders up to 25 feet at a time. 
• Requires occasional working in confined space work environment with the potential of extreme temperature exposure, chemical exposure, and radiation exposure during an 8-to-12-hour shift.

Please note that the essential job functions listed above are not intended to be all-encompassing. Employees may be asked to perform tasks which are not listed in this description but may also be considered essential for employment. The following physical requirements are essential job functions necessary to perform critical welding duties safely.

Qualification, education, and experience requirements:

• Minimum 3 years of related experience with High School diploma/GED and/or certification in assigned area preferred.
• Must be able to work independently with minimal supervision/oversight; have working knowledge of precision calibration tools (weld gauges), be able to operate multiple types of welding equipment, and possess good trouble shooting / problem solving skills.
• Highly motivated, self-starter with the ability to work multiple shifts.
• Able to read and interpret drawings, technique sheets and weld symbols.
• Ability pass respirator fit-check and wearing of respirator for portions of or all of an 8 to 12-hour shift or as required. Must be clean shaven for fit-check and dawning of respirator. Must be able to comply with respirator fit-testing requirements. Clean-shaven status may be required in accordance with OSHA respirator safety standards. Reasonable accommodations will be considered where required by law.
• Must be a team player. 
• Flexible, willing to work long hours, safety oriented.
• Experience with the fabrication of submarine parts and modules is preferred.

Weld Test Requirements:

• GMAW-SP & GMAW-P
• GMAW-P will be 3 position plate tests with MIL-100S-1 wire; GMAW-SP will be in 2G position with MIL-100S-1 wire.
• Welding tests will be bent immediately after the test 
• Further volumetric welding tests will be given to mimic hull penetration and liner installations.
• Successful completion of volumetric weld tests is required for X-Ray placement.

Successful candidate must possess the willingness and ability to complete and pass all pre-employment and employment screening requirements which may include but are not limited to medical, psychological (if required by site), background and substance abuse screening(s).

Work Authorization Requirements 

• Proof of Identification - Driver's license or any other identification card issued by the federal, state, or local government that contains a photograph and the person's name, date of birth, gender, height, eye color, and street address.

Proof of US Citizenship (must provide one)

• U.S. birth certificate (birth documents issued by a hospital, notifications of birth registrations; and Puerto Rico birth certificates issued before July 1, 2010, are not accepted
• Valid, unexpired U.S. passport or U.S. passport card
• U.S. Certificate of Citizenship or Certificate of Naturalization
• A record of Military Processing-Armed forces of the United States (Form DD 1966), provided it reflects U.S. citizenship.

U.S. citizenship is required for this role due to federal contract requirements. Due to federal contract requirements, U.S. citizenship is required for this position. Work authorization will be verified in accordance with federal law after a conditional offer of employment.

Compensation is determined based on experience, certifications, and client requirements. Summit Talent Strategies follows pay transparency principles. Compensation Range: $55.00 – $57.75 per hour, based on experience, certifications, and successful completion of required weld testing. Overtime and site differentials may apply.

All screenings are required by the federal contractor’s site‑specific safety protocols and are applied consistently to all applicants.

Summit Talent Strategies is an Equal Opportunity Employer. All qualified applicants will receive consideration for opportunities without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or protected veteran status. We affirmatively seek to advance equal opportunity for all. 

We will not discharge or otherwise discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. Employees who have access to compensation information as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information.

We maintain applicant records and collect voluntary self‑identification information in accordance with applicable federal contractor affirmative action and record-keeping requirements.

Reasonable accommodations will be reviewed and provided in accordance with ADA and federal contractor requirements. If you are an individual with a disability and need a reasonable accommodation to apply or participate in the selection process, please contact   Please include the accommodation you are requesting and the job title.

Job Summary:

• Place PRs-PO’s in Xiam.
• Submitting payments and managing all invoice inquiries
• Payments follow up in SAP.
• Planning and scheduling of Preventative Maintenance and Demand Maintenance.
• Coordination with external vendors for Preventative/Calibration execution.
• Coordination with Buyers and Corporate.
• Provide accrual impact to finance
• Familiar with preferred software: Maximo, SAP and Xiam

• 
  
• Plan, write, and execute manual, CMM, and Vision System inspections
  
• Support internal customer requests for support related to inspection, measurement strategy, calibration, and other related requests.
  
• Identify nonconformances and collaborate with engineering and manufacturing teams to conduct root cause analysis and implement corrective actions
  

• 
  
• Document and record inspection results and properly file hard and electronic copies
  
• Interpret drawings and schematics.
  
• Initiate nonconformance reports (NCR's) for all nonconforming material.
  
• Perform inspections using the microscope.
  
• Perform first-article reports using various inspection tools.
  
• Follow customer specifications to satisfy the inspection requirements of the drawing or work order instructions
  
• Uphold the company core values
  
• Other duties as assigned
  

• 
  
• Must have the knowledge and experience necessary for the position.
  
• Must be able to follow instructions and procedures and work with minimal supervision.
  
• Must be capable of reading drawings and inspecting the work being performed.
  
• Strong understanding of GD&T.
  
• Manual and/or CMM inspection experience.
  
• Experience using Height Gauges, Micrometers, Calipers, and other inspection tools.
  
• Practical knowledge of Microsoft Office (Word, Excel, Outlook).
  
• Knowledge of Epicor ERP 10 or similar Management/Manufacturing Information System.
  

• 
  
• High school diploma or general education degree (GED)
  
• Minimum two years of experience with Calypso Software and Zeiss CMM; five years preferred
  

• 
  
• Is not a United States citizen
  
• Is not lawfully admitted for permanent residence in the U.S.
  
• Does not have politically protected status (embassy, refugee, or asylum)
  
• Has dual U.S. / foreign citizenship
  

DOD SkillBridge Medical Equipment Technician Internship

Thank you for your service in the military! Join Agiliti and make a difference in your new career as a Medical Equipment Technician or Biomedical Equipment Technician. Our internships are for all technician levels!

Agiliti is a nationwide company of passionate medical equipment management experts who believe every interaction has the power to change a life. Our industry-leading commitment to quality and team of expert technicians helps ensure clinicians have access to patient-ready equipment needed for patient care. Make an impact in healthcare and grow your career with Team Agiliti!

DOD SkillBridge Technician Program

Agiliti has created a 4-6 month SkillBridge program for transitioning service members to meet our specific workforce needs. We have successfully matched those needs to the skills and abilities of highly motivated service members. The Medical Equipment Technician works under the guidance of a qualified Biomedical Equipment Technician or supervisor.

Key Skills

* Electronics

* General maintenance

* Mechanical maintenance

Training Plan

* Participate in an individualized training plan that meets the soldiers needs and the work at the Agiliti location

* Training is conducted via a mixture of CBT (computer-based training), OJT (on the job) and classroom learning

* Interns will receive extensive opportunity for hands on experience and will participate in Agiliti's competency verification program

* Interns will be assigned a mentor at their location

Benefits of our SkillBridge program

* TRAINING: Both internal Agiliti and potential for formal Original Equipment Manufacturer

* Wide range of positions and career paths available

* Nationwide: Over 90 locations for relocation

* Hands-on experience in the medical field

* Highly sought-after skills

* Meaningful work: Support hospitals including many DOD facilities

* 25% of open positions are filled with internal talent through promotions

What Will You Do in This Role

* Provide cost-effective equipment inspection, maintenance, calibration, and repair service on a variety of medical devices

* Complete all paperwork and computer data entry accurately and promptly to ensure complete documentation for billing and required regulatory compliance.

* Communicate with clinical staff on the topics of equipment features, functionality, etc.

What You Will Need for This Role

* High school diploma or equivalent required.

* Must hold a current, valid, and unrestricted driver's license. Must have a safe driving record based on Agiliti policies.

* Basic computer skills; understanding of computer networks and equipment interfacing.

* Willing to work flexible hours, including evenings, weekends, and holidays, as well as emergency off-hours as required to support a 24/7 schedule.

* Willing to travel periodically to support business needs.

* Able to lift and/or push up to 75 pounds.

* Able to stand and walk for extended periods of time.

* Able to frequently bend, stoop, twist, climb, crouch/squat, kneel/crawl, sit, and stand for long periods of time.

Permanent employees also enjoy

* Tuition assistance

* 401k

* Health benefits

* Continued technical training

It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements

You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination.

Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs.

Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law.

If you require assistance with your application, please contact .

Primary Job Location:

Chicago District

Additional Locations (if applicable):

Albuquerque District, Albuquerque District, Atlanta District/COE, Atlanta Service Center, Baltimore District, Birmingham District, Boston District, Burbank District, Charlotte District, Cincinnati District, Cleveland District, Columbus District, Dallas District, Denver District, Detroit District, El Paso District, Fargo District, Ft. Lauderdale FL Branch (inactive), Fullerton District/COE, Green Bay District, Harrisburg District, Houston District, Indianapolis District, Iowa City District, Jacksonville District {+ 30 more}

Job Title:

Medical Equipment Technician I

Company:

Agiliti

Location City:

Downers Grove

Location State:

Illinois

Pay Range for All Locations Listed:

$15.15 - $38.43

This range represents the low and high ends of the Agiliti pay range for this position. This base pay range information is based on the market locations shown. The actual pay offered may vary depending on several factors including geographic location, experience, job-related knowledge, skills, and related factors. Dependent on the position offered, short-term and/or long-term incentives may be provided as part of the compensation. Applicants should apply via Agiliti's internal or external career site.

• Thorough understanding of manufacturing and manufacturing processes.
• Ability to read and understand sketches, blueprints.
• Understanding and ability to layout parts
• Thorough understanding of tools and fixturing.
• Strong math skills.
• Ability to work well with a team while also working independently.
• Detailed oriented and ability to organize and prioritize.
• Good written and verbal communication skills.

• Previous manual grinding experience or equivalent education.
• Prior CNC experience a plus.

• Receives and reviews drawings, programs, sketches.
• Constructs and loads CNC programs as necessary. Performs all required paperwork.
• Edit/modify programs as necessary to meet customer specifications.
• Assure Marposs gauging, and MIDA probing is correctly engaged and calibrated appropriately.
• Measure, inspect, and make required adjustments to achieve correct product dimensions.
• Loads and unloads machine with aid of an overhead crane.
• Selects proper tooling, etc., sets indexing, determines base line, etc.
• Changes grinding wheel as necessary, indexes or replaces tooling as necessary.
• Checks identification on all materials handled by stamping or marking order, heat and

• Layout product as necessary.
• De-burr parts and move to the next workstation.
• Lubricates machine, checks filtration system, checks coolant levels, checks and fills reservoirs, etc.,
• Performs minor maintenance as necessary and maintains working area in a clean, orderly and safe condition.
• Reports defective material and faulty equipment to supervisor immediately.
• Observes all safety rules and regulations.

• Perform other duties as deemed necessary.