Cable Remote Jobs in Usa

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Value Stream Manager Summary

The Value Stream Manager is a leadership role that will be primarily focused on ensuring a safe work environment for all team members, while maintaining continuous operational execution and production of quality products that are delivered on-time to customers within established cost targets.

The Value Stream Manager will focus on eliminating waste developed in the value stream process, identifying business growth opportunities, understanding the importance of customer value created by the company, maximizing capacity to grow sales and driving lean continuous improvement.

Strategically focused and leading/driving team members in Kaizen events, problem solving activities, owning the value stream.

Key Responsibilities

• Manage all value stream related KPIs (SQDCI).
• Co-leads recordable or significant case investigations including root-cause and corrective actions.
• Responsible for ensuring the execution of findings of accident investigations and safety alerts within their value stream.
• Ensure policies and processes are deployed uniformly throughout the value stream.
• Actively leads the daily huddle process and can share information related to value stream as needed.
• Lead problem solving events and follow-up with corrective actions for completion
• Create a standard for value stream process and ensure entire team are properly trained, resourced, supplied, and managed to attain the objectives
• Develop a highly motivated and committed workforce with emphasis on the development of skills needed to accomplish safety, quality, on-time delivery, and product cost goals.

Qualifications And Experience Requirements

• Bachelor’s degree is required
• 5+ years of management experience
• Bilingual is a plus
• Lean manufacturing experience is required
• Strong MS Excel experience desired
• SAP is preferred

Benefits We Offer:

• 401k with Matching
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

KIC is looking for a hands-on Production Assembly Technician to join our manufacturing team in Rancho Bernardo. In this role you will build and assemble components such as probes, shields, cable assemblies, and wiring bundles used in electronics manufacturing equipment.

This is an active production role that involves working with wiring, small electrical assemblies, and moving between workstations throughout the day. Candidates who enjoy hands-on manufacturing work and building physical products as part of a team will thrive in this environment.

What You’ll Do

A typical day may include:

• Assembling probes, shields, cable assemblies, and wiring bundles used in KIC products

• Cutting, stripping, routing, and bundling wires for production assemblies

• Following detailed work instructions and production work orders

• Moving between assembly stations to support different stages of the production process

• Performing visual inspections to ensure assemblies meet quality standards

• Occasionally assisting with packaging or preparing finished assemblies

This role focuses primarily on product assembly and manufacturing, not warehouse picking or distribution work.

Work Environment

This is a hands-on manufacturing role that includes:

• Building cable assemblies, probes, and wiring bundles

• Using hand tools such as wire strippers, cutters, and crimpers

• Moving between work areas and being physically active throughout the day

• Repetitive assembly tasks requiring attention to detail

• Occasional lifting of materials up to 40 lbs

Qualifications

• High school diploma or GED preferred

• Experience in manufacturing, electronics assembly, or production environments is a plus

• Ability to work with small hand tools and follow assembly instructions

• Strong attention to detail and consistent quality standards

Compensation & Benefits

Hourly Pay: $18–$20 per hour (DOE) + Profit Share Bonus Program

Benefits include:

• Fully paid medical, dental, and vision insurance

• 401(k) with company match (up to 4%)

• Flexible Spending Account (FSA)

• Paid Time Off and paid holidays

• Annual benefit allowance of $3,600 (paid bi-weekly)

• Supplemental short-term and long-term disability insurance

Why Join KIC

At KIC, we design and build thermal measurement tools used by electronics manufacturers around the world. The work we do in our facility directly supports customers who rely on our technology to improve their manufacturing processes.

You’ll be part of a team that builds products supporting the technology people rely on every day.

Apply here:

Electrical Field Engineer

• Location: Mount Pleasant, WI
• Contract: 6 month contract-to-hire
• Schedule: 8am-5pm (Monday-Friday, full onsite)
• Pay: $60-$70/hr

Must Haves:

• 7+ years of experience as a Project Engineer, Field Engineer, Construction Engineer, etc.
• Very strong experience in low voltage, inside electrical, power distribution
• Bachelors degree + in electrical engineering
• Ability to understand one-line drawings, cable schedules, switch gear packages, cable management, etc.

Plusses:

• Master’s degree in electrical engineering
• Expert in Excel & Bluebeam

What You’ll Do:

• Review and interpret electrical engineering drawings, including one-line diagrams, cable schedules, conduit layouts, and switchgear packages, ensuring alignment with project specifications and construction requirements.
• Collaborate with design engineers to review drawings and technical documentation, identify discrepancies or improvement opportunities, and communicate recommended updates to optimize constructability and system performance.
• Support the implementation of electrical designs in the field, working closely with construction teams to ensure installations align with approved drawings and engineering intent.
• Manage and maintain electrical drawing logs, redlines, and As-Builts, ensuring all field changes and updates are accurately documented and incorporated into final project records.
• Coordinate with engineering teams and subcontractors to resolve RFIs, technical questions, and design clarifications related to electrical systems.
• Provide technical support for electrical construction activities, including participation in construction planning, installation sequencing, and commissioning readiness.
• Track and report progress on electrical scopes of work, proactively identifying issues that could impact cost, schedule, safety, or quality and communicating them to the Project Manager.

About Us

We are a leading technology and electrical contracting organization specializing in the design, implementation, and support of ICT systems for commercial, industrial, healthcare, government, and mission-critical facilities. Our team delivers innovative technology infrastructure solutions that power connectivity, communication, and security in today’s digital-first world.

Position Overview

The ICT Engineer will play a key role in planning, designing, and implementing network infrastructure, communications technologies, and intelligent building systems. This role requires a strong technical foundation in structured cabling, network systems, wireless technologies, and industry standards, with the ability to collaborate across engineering, field installation, and client teams.

Key Responsibilities

•Develop ICT infrastructure designs, drawings, and specifications including structured cabling, pathways, and equipment rooms

•Support outside plant (OSP) and inside plant (ISP) low-voltage system planning

•Create technical documentation, submittals, and as-built packages

•Perform site surveys, assessments, and technology audits

•Assist in wireless network planning, DAS coordination, and technology integration

•Provide engineering support during installation, testing, and commissioning

•Ensure compliance with TIA, BICSI, NEC, and relevant standards

•Collaborate with project managers, field technicians, engineers, and clients

•Troubleshoot ICT-related issues during design and build phases

•Participate in QA/QC reviews and support project close-out deliverables

Qualifications

Required

•Bachelor’s degree in engineering, Information Technology, Telecommunications, or related field — OR equivalent experience

•Strong understanding of ICT design standards (TIA/EIA, BICSI, NEC)

•Knowledge of structured cabling, fiber, network hardware, pathways, and grounding

•Technical aptitude with network systems, Wi-Fi, DAS, and smart building technology

•Excellent documentation, communication, and coordination skills

Preferred

•BICSI credentials (RCDD, DCDC, TECH, INST, RTPM, etc.)

•CCNA, Network+, or similar networking certifications

•Experience with CAD, BIM, or modeling tools

•Experience in construction or technology integration environments

•Familiarity with project management tools and workflows

What We Offer

•Employee Stock Ownership Plan (ESOP)

•Competitive salary

•Comprehensive benefits package

•Professional growth and certification support (BICSI, manufacturer training, etc.)

•Opportunity to work on high-profile technology infrastructure projects

•A collaborative culture focused on innovation and continuous improvement

Relocation Not Available: Local Candidates Only

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Industrial Maintenance Controls Technician

Location: Pleasant Prairie, WI

Compensation: $36 - $39 hour

Shift: Monday – Friday ~ days

Pension plan!!

As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.

Qualifications and Experience Requirements

• Associates degree or higher required
• PLC experience is required
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Industrial Maintenance Controls Technician Job Description

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
• Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
• Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
• Access and use PLC logic programming to troubleshoot production equipment.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

Position summary:

Install, maintain, and repair electrical systems, apparatus, and electrical equipment, wiring and fixtures, and electronic components of industrial machinery and equipment following electrical code, manuals, schematic diagrams, blueprints, and other specifications, using hand tools, power tools, and electrical and electronic test equipment.

Tasks:

• Install power supply wiring and conduit for newly installed machines and equipment following electrical code and blueprints, using hand tools and voltage tester.
• Install ground leads and connect power cables and wires to machines and equipment, following manuals, schematic diagrams, blueprints, using hand tools and test equipment.
• Diagnoses malfunctioning apparatus, such as transformers, motors, and fixtures using test equipment.
• Repair or replace faulty electric components, wiring, equipment, and fixtures, using hand tools and power tools.
• Test malfunctioning or broken equipment using test equipment, and discuss malfunction with other workers to diagnose malfunction.
• Assemble, install, test, and maintain electrical or electronic wiring, equipment, appliances, apparatus, and fixtures, using hand tools and power tools.
• Place conduit, pipes or tubing, inside designated partitions, walls, structures or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
• Connect wires to circuit breakers, transformers, or other components.
• Install ground leads and connect power cables to equipment, such as motors.

Skills:

• Installation - Installing equipment, machines, wiring, or programs to meet specifications.
• Reading Comprehension - Understanding written sentences and paragraphs in work related documents.
• Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times.
• Troubleshooting - Determining causes of operating errors and deciding what to do about it.
• Equipment Selection - Determining the kind of tools and equipment needed to do a job.
• Repairing - Repairing machines or systems using the needed tools.

Attributes:

• Follow the rules of safe conduct at all times.
• Demonstrate ability to effectively utilize materials/resources in cost-effective manner.
• Problem Sensitivity - The ability to tell when something is wrong or is likely to go wrong. It does not involve solving the problem, only recognizing there is a problem.
• Deductive Reasoning - The ability to apply general rules to specific problems to produce answers that make sense.
• Oral Comprehension - The ability to listen to and understand information and ideas presented through spoken words and sentences.
• Information Ordering - The ability to arrange things or actions in a certain order or pattern according to a specific rule or set of rules (e.g., patterns of numbers, letters, words, pictures, mathematical operations).
• Arm-Hand Steadiness - The ability to keep your hand and arm steady while moving your arm or while holding your arm and hand in one position.
• Manual Dexterity - The ability to quickly move your hand, your hand together with your arm, or your two hands to grasp, manipulate, or assemble objects.

Knowledge Requirements:

• Post-Secondary Certificate desirable- awarded for training completed after high school. Minimum 5 years in craft, including helper and apprentice roles. Minimum 2 years as journeyman working in industrial environment
• READING: The employee must have the ability to read safety requirements, instructions in the correct use and maintenance of shop tools, be able to read and understand methods and procedures that are present on drawings, layout work, and just specifications.
• WRITING: Must have the ability to write simple reports with the correct format using spelling and grammar. (English
• SPEAKING: Must have the ability to speak using correct English with a well modulated voice.
• The minimum math ability usually associated with this classification is the ability to calculate surface areas, translate these figures into a bill of material which can be used to complete a specific job. Employees must be able to use variable and formulas which are normally found in most industry approved trade hand books. Also, employees must be familiar with the O.S.H.A. requirements for the type work that is being performed.

The employee must understand that the reporting system used for problems and information is as follows: 1) Crewleader, 2) Foreman, 3) General Foreman, and 4) Superintendent.

Physical Requirements:

• Positions require working in: climbing, bending, sitting, walking, kneeling, crawling, standing, lifting, pushing, and pulling.
• Good hand eye balance and the ability to distinguish colors are required in order to use the tools that are necessary to perform the required work.
• Employees must have vision which has good depth perception in order to judge distance and space relationships.
• The employee must be able to work in all types of weather conditions.
• The ability to work in elevated positions is a must.
• The employee must be able to work in confined spaces as well as wear the following safety equipment when need be: life vests, ear protection, rubber gloves, leather gloves, hard hat, slicker suit, acid suit, rubber gloves, full face breathing mask, wearing full safety harness, or wearing a face shield.
• The heavy work will require the employee to exert up to 100 pounds of force occasionally: The medium work will require the exerting of 50 pounds of frequently: The remainder of the work should require the exertion of 20 pounds of force to constantly move an object.

Other Requirements:

The employee must have a telephone. The employee is expected to work overtime in order to maintain the plant in a safe and productive state. The employee is expected to make call outs when such work is available and the employee’s services are needed.

The employee must have a valid Texas Driver’s License and have permission prior to operating any TIG vehicle. The requirements for operating a company vehicle are as follows: In the past three (3) years the employee can have had only 4 moving violations, no more than 2 chargeable accidents, and no D.W.I.

NOTICE: THIS JOB DESCRIPTION IN NO WAY STATES OR IMPLIES THAT THESE ARE THE ONLY DUTIES TO BE PREFORMED BY THIS EMPLOYEE. HE OR SHE WILL BE REQUIRED TO FOLLOW ANY OTHER INSTRUCTIONS AND TO PERFORM ANY OTHER DUTIES REQUESTED BY HIS OR HER SUPERVISOR.

Job Type: Full-time

Automation Technician II

Location: Onsite; Buffalo Grove, IL

Employment Type: Full-Time / Direct Hire

Pay: $26–28/hour

12-hour Shift rotation:

• 6:00 AM – 6:00 PM, rotating schedule

• 6:00 PM – 6:00 AM, rotating nights (10% shift differential)

Position Overview

We are seeking Maintenance Technicians with hands-on experience supporting automated manufacturing, robotics, or warehouse automation environments. This role is critical to maintaining continuous system operation and minimizing downtime across highly automated equipment and production systems.

The ideal candidate is comfortable troubleshooting complex electromechanical systems, working with PLC-controlled equipment, and performing both reactive and preventive maintenance in a fast-paced, high-automation setting.

What You’ll Be Doing

• Maintain continuous operation of automated, robotic, and material handling systems by adjusting, repairing, replacing, or modifying components
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems and return equipment to service quickly and safely
• Perform scheduled preventive maintenance on robotic systems and process support equipment
• Read and interpret electrical schematics, mechanical diagrams, and complex automated system drawings
• Work with PLC-controlled equipment and assist in automation system diagnostics
• Identify machine malfunctions, isolate root causes, and implement cost-effective repairs
• Perform equipment calibrations, re-qualifications, and system validations per schedule
• Assist engineers and automation teams with equipment installation, removal, and system qualification
• Support corrective action reports and process improvement initiatives
• Disassemble equipment, inspect components for defects, and repair or replace parts as needed
• Support both hardware and, at higher levels, limited software maintenance activities

Required Experience and Skills

• Background in automated manufacturing, robotics, material handling systems, or automated warehouse environments
• Strong electrical and mechanical troubleshooting skills
• Experience with PLC-controlled equipment
• Ability to read electrical schematics and mechanical drawings
• Preventive and corrective maintenance experience in high-volume or automated settings
• Solid computer and documentation skills

Technical Experience Preferred

• Automation, robotics, or conveyor/material handling systems
• Electronic assembly and troubleshooting (schematics, PCB loading, mechanical assembly)
• Cable and harness work (crimping, soldering, connector assembly, cable prep)
• Testing equipment such as oscilloscopes, logic analyzers, and cable/harness testers
• Automated machine operations (surface mount, component insertion, wave soldering)
• Mechanical and electrical tools including alignment tools, measuring tools, taps & dies, and power/air tools

Fiber Optic Test & Measurement Technician

Salary: 60,000 per year

Perm with excellent benefits.

Location: Newington, NH

Hours: Will be 4 12 hour rotating shifts -Night Shift 6:00pm – 6:30am

Will be responsible for performing detailed electro-optical and electrical testing on fiber optic cables and related systems throughout the production process. This role ensures products meet internal quality standards and contractual specifications by conducting testing, analyzing results, and documenting any non-conformances.

Key Responsibilities

• Perform characterization tests on fiber optic cables, including OTDR, Chromatic Dispersion, Polarization Mode Dispersion, and electrical tests such as High Voltage, Insulation Resistance (IR), and DC Resistance (DCR).
• Analyze test data to ensure compliance with product specifications and quality standards.
• Prepare cable ends and test setups using hand and power tools.
• Document results and generate reports for any failures or non-conforming products.
• Collaborate with manufacturing, quality, and management teams to address testing outcomes and production needs.
• Follow safety protocols, including proper use of PPE and adherence to company safety practices.
• Support continuous improvement initiatives and maintain accurate testing records.
• Respond to multiple production testing assignments as required.

Qualifications

• High school diploma or equivalent required.
• Associate degree in electrical/electronics technology or at least two years of related experience preferred.
• Strong attention to detail, analytical skills, and ability to work independently.
• Basic math skills including fractions, decimals, ratios, and conversions.
• Proficiency with Microsoft Office (Excel, Word, Outlook).
• Effective verbal and written communication skills.
• Flexibility to work different shifts, overtime, and weekends based on production needs.

Company Description

Pittwater is a forward-thinking technology solutions company on a mission to empower businesses to thrive in the digital age. We specialize in transforming workplaces through innovative and integrated technology solutions in audio/visual, network and IT. Our vision is to revolutionize how businesses approach technology, creating secure, dynamic, and user-friendly environments.

Role Description

Are you a seasoned AV Field Technician tired of the constant travel but still passionate about the technology? Pittwater is seeking an AV Technical Operations Specialist to anchor our Brookfield headquarters. This is a multifaceted role designed for a subject matter expert who wants a "home base." You will oversee our integration center and warehouse operations—ensuring our gear is tested, staged, and ready for deployment—while remaining available to lead high-priority field installations and structured cabling work when a project needs an expert hand. his is a full-time, on-site role designed to support career-path opportunities into various technical and operational positions for the right candidate.

Responsibilities

• Technical Fulfillment: Lead the disassembly, testing, and repackaging of complex AV equipment (e.g., video wall modules) to ensure "field-ready" quality.
• Warehouse Stewardship: Manage inventory integrity using our WMS, overseeing inbound/outbound logistics and coordinating with 3PL partners.
• Field Leadership: Deploy to client sites to support AV installations, rack building, and structured cabling, ensuring design intent is realized.
• Quality Assurance: Utilize diagnostic tools like multimeters to troubleshoot components and maintain detailed documentation for full traceability.
• Coordination Mindset: Highly organized with an interest in the "how and why" of project lifecycles. Communication: Ability to bridge the gap between field crews, design engineers, and clients.
• Office Administration: Oversee general office demands and basic administration to keep the Brookfield hub running smoothly.

Qualifications

• Experience: 5+ years of hands-on AV Field Installation experience is required. You must know your way around a job site and a rack.
• Technical Mastery: Strong knowledge of workplace technology domains including Audio/Visual, Network/IT, and structured cabling.
• Physical Capability: Ability to lift/move products up to 50 lbs and remain active in a warehouse environment.
• Software & Productivity Tools: Proficiency with Google Workspace, Microsoft Excel, and familiarity with WMS/ERP systems.
• Certifications: CTS certification is highly preferred.
• Mindset: A "can-do" attitude with the organizational skills to manage a facility independently.

What We Offer

• Competitive compensation based on your deep industry experience.
• Full medical/dental/vision package and 401(k) with matching.
• Paid Time Off (PTO) and paid holidays.
• An innovative work environment with opportunities for professional growth.

Why Pittwater?

• At Pittwater, we’re passionate about delivering best-in-class AV solutions to our clients. We believe in fostering a collaborative, growth-focused environment where team members can thrive. If you’re ready to make an impact and grow your career in the exciting world of AV and network integration, we’d love to hear from you!