Cable Remote Control Jobs in Usa

Cable Assembler

6 month contract (good chance at FTE conversion)

Onsite in Poway, CA

Client in defense industry

Job description:

Our client is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems.

Under general supervision with detailed instruction for new work or a special assignment, this position is responsible for performing a wide variety of repetitive or standard electronic and /or mechanical assemblies and subassemblies. Determines and/or follows methods and sequence of operations in performing assembly tasks such as wiring, component installation, hand soldering and cable harnessing on assembly units. May monitor and verify quality in accordance with control procedures.

DUTIES AND RESPONSIBILITIES:

· Assembles components, assemblies or sub-assemblies.

· Makes setups and adjustments holding tolerances to specifications.

· May perform duties as required in assembly of electronic equipment such as cables, harnesses, chassis, and printed circuit boards, or may perform mechanical assembly of panels, LRU's, batteries, and servo motors.

· May disassemble, modify, rework, and reassemble assemblies or subassemblies.

· Responsible for observing all laws, regulations and other applicable obligations wherever and whenever business is conducted on behalf of the Company.

· Expected to work in a safe manner in accordance with established operating procedures and practices.

· Additional Functions:

o May assist in training lower level assemblers.

o Performs housekeeping and cleanup duties upon completion of assigned tasks.

o Other duties as assigned or required.

Requirements:

The ideal candidate will possess the following qualifications:

· Typical requires a high school diploma or equivalent and three or more years experience.

· Must be customer focused and possess:

o The ability to read and interpret engineering drawing and wire lists.

o Good understanding of the general aspects of the job with limited technical comprehension.

o Knowledge of computer operations and applications pertinent to the position.

o Familiarity with use of soldering and compression connection tools.

o Good visual perception and ability to distinguish between colors.

· The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.

· Ability to obtain and maintain DoD Security Clearance is required.

The Construction Manager oversees all phases of construction projects – from planning through closeouts – to ensure safe, efficient, and high-quality delivery. This position manages field supervisors, subcontractors, schedules, and budgets while ensuring compliance with customer specifications, safety standards, and company procedures. The Construction Manager serves as the key point of contact between field operations, project management, and clients.

Key Responsibilities:

• Project Oversight – Plan, direct, and coordinate construction activities including fiber, coax, wireless, and OSP & ISP infrastructure builds.
• Scheduling & Coordination – Develop and maintain project schedules, crew resources, materials, and equipment are properly allocated for each project.
• Team Leadership – Supervise and mentor field supervisors, foremen, and construction crews to promote safety, quality, and performance.
• Budget & Cost Control – Monitor project budgets, control labor and material costs, and assist with change order management.
• Client & Vendor Management – Maintain strong relationships with clients, subcontractors, and vendors; communicate project status, challenges, and solutions.
• Quality Assurance – Ensure all work is performed according to specifications, design documents, and industry standards; review and approve as-built documentation.
• Safety Management – Enforce company safety policies and OSHA/DOT standards, conduct safety audits, and participate in incident investigations.
• Permitting & Compliance – Coordinate with local jurisdictions and utilities to secure permits, rights-of-way, and 811 tickets; ensure compliance with federal, state, and local regulations.
• Reporting – Provide regular progress reports to upper management and clients, highlighting milestones, delays, and corrective actions.
• Continuous Improvement – Identify process improvements to increase efficiency, reduce costs, and enhance safety and quality outcomes.
• Verify & Approve – JSA, timesheet, OT, and safety compliance responsibilities of each supervisor.
• Fleet Accountability – Ensure all company vehicles and equipment is being maintained, utilized, and clean.
• Office Maintenance – Ensure offices are organized, clean, and maintained.
• PO Approvals – Ensure all POs are reviewed, approved, and are aligned with company policies.
• Employee Accountability - Ensure all employees and subcontractors have clearly defined goals and the necessary resources (personnel, material, vehicles, tools, and equipment) to achieve them. Foster a culture of ownership by modeling accountability and holding team members responsible for performance and results.
• Other duties as assigned

Qualifications:

Education & Experience:

• Degree in Construction Management, Engineering, Telecommunications, or a related field preferred; equivalent work experience accepted in lieu of formal education.
• 5-8 years of professional experience in telecom construction (fiber, coax, copper, or wireless) with at least 3 years in a leadership or management role.

Technical Skills:

• In-depth knowledge of telecom infrastructure, including aerial, and underground fiber, conduit, coax systems, and wireless construction.
• Proficient in reading and interpreting construction drawing, maps, and project documentation.
• Experience using project management and scheduling software and tools.
• Strong understanding of OSHA and DOT standards relevant to telecom construction standards.
• Familiarity with as-built documentation, and fiber management systems.

Core Competencies:

• Excellent leadership, communication, and interpersonal skills.
• Strong organizational and problem-solving abilities.
• Proven ability to manage multiple projects and teams simultaneously.
• Commitment to safety, quality, and operational excellence

Other Requirements:

• Valid driver’s license and clean driving record.
• Willingness to travel to project sites as required.
• OSHA SST or 40 confined space certified

Physical Requirements:

• Ability to work outdoors and visit active construction sites.
• May require extended working hours and/or weekends to meet project deadlines.
• Ability to lift-up-to 50lbs and navigate uneven terrain

Job Summary

We are seeking a Mechanical Engineer III to serve as a Cable/Ribbon Assembly Equipment Capability Engineer supporting high volume cable manufacturing operations. This role is highly technical and focused on equipment capability, mechanical performance, and process robustness for cable assembly lines. The engineer will be responsible for driving equipment performance improvements, ensuring process capability, and supporting new equipment introduction and line expansions.

Key Responsibilities

Equipment Capability & Performance

* Own mechanical capability of cable/ribbon assembly equipment

* Establish and maintain equipment capability metrics (OEE, Cp/Cpk, uptime, scrap, yield)

* Lead mechanical capability studies, line balancing, and throughput optimization efforts

* Identify mechanical constraints impacting line speed, tension stability, concentricity, and dimensional control Mechanical Engineering & Design

* Design, modify, and optimize tooling, fixturing, guides, rollers, payoff systems, and tension control mechanisms

* Develop detailed 2D drawings and 3D CAD models for equipment upgrades and custom tooling

* Perform engineering calculations related to tension, torque, inertia, thermal effects, and material deformation

* Support equipment retrofits and modernization projects

Manufacturing Support & Troubleshooting

* Provide hands on technical support during production, trials, and equipment start ups

* Perform structured root cause analysis (mechanical, process, interface issues) and implement corrective actions

* Collaborate with process, controls, maintenance, and quality teams to resolve chronic equipment issues

* Support development and execution of FAT/SAT, IQ/OQ/PQ, and line acceptance criteria

New Equipment & Supplier Interface

* Define mechanical requirements and performance specifications for new cable assembly equipment

* Work directly with OEMs and system integrators on equipment design, build, and acceptance

* Review vendor drawings, layouts, and design proposals for compliance with performance and safety requirements

Documentation & Standards

* Create and maintain mechanical documentation including equipment specifications, PM standards, and change records

* Ensure compliance with applicable safety, ergonomic, and manufacturing standards

* Support continuous improvement initiatives using Lean and Six Sigma methodologies

Required Qualifications

* Bachelor's degree in Mechanical Engineering or related discipline

* 3-6 years of experience in cable manufacturing or cable assembly equipment engineering

* Strong hands on experience with ribboning, stranding, extrusion, shielding, jacketing, or armoring equipment

* Deep understanding of mechanical systems in continuous manufacturing environments

* Proficiency in CAD tools (SolidWorks, Creo, AutoCAD, or equivalent)

* Proficiency in data Analysis - JMP, Excel, Minitab

* Experience performing equipment capability analysis and production line optimization

* Strong troubleshooting and analytical problem solving skills

Preferred Qualifications

* Experience with ribbon cable manufacturing

* Knowledge of tension control systems, dancer mechanisms, capstans, and servo driven equipment

* Familiarity with statistical process control (SPC), Cp/Cpk analysis, and OEE

* Working knowledge of PLC controlled machinery and electro mechanical interfaces

* Experience leading or supporting high speed cable line scale ups

* Lean Manufacturing or Six Sigma certification

Work Environment

* Manufacturing floor and equipment build/commissioning environments

* Significant hands on interaction with operating production lines

* May require extended on site presence during trials and ramp ups

* Occasional travel to supplier or sister manufacturing sites

At TDS Telecom, connecting people is at the heart of everything we do. We are forward thinkers who leverage cutting-edge fiber internet technology to strengthen communities. We are dedicated to excellence, which drives us to succeed together, creating a better world through meaningful connections. Ready to make an impact? This position is full‑time, year‑round, and typically works close to home with only limited travel required for training.

As a Senior Outside Plant Construction Technician in Madison, WI, you will oversee the construction and maintenance of PON/fiber network communications facilities in TDS Telecom serving areas. Performs advanced operation of construction equipment which includes, but is not limited to, trenchers, backhoes, end loaders, and plows. Manages the overall project while coordinating with internal and external resources. Ensures the entire team operates according to safety protocols.

This role includes a $5,000 sign‑on bonus (payout terms apply) and may qualify for relocation assistance.

Outside Plant Construction Technicians can also earn up to $75 per week in incentives when your team meets production targets.

Training:

As a Senior Outside Plant Construction Technician, you will have the opportunity to obtain a Class A CDL through our in-house training program. You will attend safety training at one of our new facilities where you will also be trained on Pole Climbing and Bucket Trucks. On-the-job training includes exposure to various construction equipment including Directional Drill Rigs, Mini Excavators, Trenchers, and Locators. Fiber optic training includes Fusion Splicing, Fault Detection, and exposure to OTDRs and other advanced testing equipment.

**This position may be eligible for relocation assistance.  For further information, please contact the Talent Acquisition team.**

• Receives maps and staking sheets for the full construction project and ensures project is built, with limited guidance from supervisors.
• Communicates updates to the project team as required.
• Manages daily and weekly project work based on deadlines, material and equipment availability, weather, and other factors.
• Coordinates with supervisor to ensure continual supply of work and availability of materials.
• Drafts and submits redlines upon completion of project.
• Ensures locates are performed on time and prior to team and equipment arriving at the worksite.
• Regularly engages municipalities, utility companies, suppliers, contractors, and property owners in order to smoothly coordinate project tasks and avoid disputes. 
• Reads construction plans and municipality permits, and determines approach for completing work.
• Maintains all project documentation and records costs of project materials and material transfers.
• Ensures DOT inspections are performed on equipment.
• Works with project managers to ensure projects remain on schedule and within budget.
• Performs general construction labor in various weather conditions while utilizing safety fundamentals.
  • Advanced operation of trenchers, backhoes, end loaders, plows, and other excavating equipment to construct and maintain outside plant cable facilities.
  • Advanced operation of all test equipment associated with outside plant facilities and construction duties.
  • Installs, troubleshoots, tests, splices, repairs, and maintains fiber optic facilities.
  • Identifies location of defective cable using various test equipment and repairs buried, aerial, underground, and/or customer cable.
  • Locates cable and fiber in response to customer requests and/or construction needs.
  • Performs cable fault acceptance tests on newly constructed facilities.
• Actively trains, monitors, and coaches team members while sharing construction knowledge and experience. Performs quality control inspections and makes training recommendations. Ensures safety protocols are enforced.
•  Services, cleans, maintains, and repairs equipment.
• Completes all related paperwork in a timely manner.
• Provides assistance to field services technicians, as needed.

The functions listed above are intended to describe the general nature and level of work being performed by associates assigned to this job. They are not intended to be an exhaustive list of all responsibilities; other duties may be assigned.

Required Qualifications

• 2+ years of construction equipment operation utilizing various underground and aerial construction equipment such as directional drills, trencher/plow/rock saw, backhoe, or bucket trucks -OR- current military service, or prior military service with honorable discharge.
• 1+ years of experience leading construction projects as a crew foreperson or project manager.
• Must follow the TDS attendance guidelines in order to meet TDS’s business needs including but not limited to our obligations to our customers and to our customers’ needs.
• Must have and maintain a valid driver’s license and remain eligible for DOT requirements.

Other Qualifications

• Must have the ability to obtain a Class A CDL. A current CDL is preferred at hire, but TDS will train and certify eligible associates through its in-house CDL certification program after hire.
• Physical requirements may vary based on company needs: Ability to climb poles, ladders, towers, and other structures as needed. Ability to kneel, dig, lift, and pull.
• Upon hire, must successfully pass all components of the Safety Training course curriculum.
• Upon hire, must successfully complete customer-specific requirements, which may include a background check administered by the customer.
• Preferred 2+ years’ experience in the construction of fiber optic cable outside plant networks -OR- 2+ years installation of any underground or overhead utilities will be considered.
• Understanding of telecommunication products and services.
• Proven organizational skills and ability to multi-task.
• May require occasional travel.
• Must be willing to work overtime as needed. May be required to work various/swing shifts as business needs dictate.
• Must be able to operate vehicles with manual transmissions.

Do you meet the Required Qualifications but are unsure if your experience aligns with the Other Qualifications? We encourage you to apply! Research shows that many candidates hesitate to apply unless they meet 100% of the qualifications, even when they possess the skills and experience needed to succeed in the role. Experience and skills come in many forms, and they may not always match exactly what’s listed on paper, but they can still lead to success. If you meet the Required Qualifications and believe you have the potential to thrive in this role, we encourage you to apply today!

Physical Demands and Work Environment

While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and talk or hear.  The employee is frequently required to stand; walk; and stoop, kneel, crouch or crawl. The employee must also be able to climb poles, ladders, towers or other structures.  The employee is occasionally required to sit, reach with hands and arms, climb or balance, and taste or smell.  The employee must regularly lift and/or move up to 50 pounds and occasionally lift and/or move more than 100 pounds.  Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

While performing the duties of this job, the employee is regularly exposed to outside weather conditions and may have to work in attics and crawl spaces, or high-risk areas such as high voltage electrical, trenches, and manholes. The employee is frequently exposed to moving mechanical parts and heavy equipment; high, precarious places; fumes or airborne particles; and vibration.  The employee is occasionally exposed to wet and/or humid conditions, toxic or caustic chemicals, extreme cold, and extreme heat.  The noise level in the work environment is at times loud.

Benefits

We believe in taking care of our team, which is why we offer comprehensive benefits to support your health, financial well-being, and overall happiness. Join us and experience a work environment where your well-being is a top priority!

Associates scheduled to work 20 or more hours per week have access to:

• Medical Coverage
• Dental Coverage
• Vision Coverage
• Life Insurance
• 401(k) Plan
• Generous Vacation & Paid Sick Leave
• Seven Paid National Holidays & One Floating Holiday
• Paid Parental Leave (6 weeks after 12 months of employment)
• Adoption & Surrogacy Assistance
• Employee Assistance & Wellness Programs 

Associates working 30 or more hours per week additionally have access to:

• Short-Term & Long-Term Disability
• TDS Service Discounts
• Education Assistance
• Paid Volunteer Time 

In addition to these benefits, all associates will have the opportunity to participate in our Associate Resource Groups, which are designed to encourage community and facilitate professional development. To learn more, click here.

Who is TDS Telecom?

TDS Telecom provides high-speed internet, TV entertainment, and phone services to a diverse range of communities, including small to mid-sized urban, suburban, and rural areas across the U.S. With over 50 years of experience, TDS is committed to building and expanding fiber optic networks that bring cutting-edge connectivity to neighborhoods nationwide. Serving over 1 million connections, our mission is to create a better world by delivering innovative communication solutions that enhance the way people live, work, and connect. Visit  to learn more! 

At TDS, we are committed to Equal Employment Opportunity (EEO) and value the diversity of our workforce. We consider all qualified applicants without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or any other status protected by law.

Pay Transparency

The listed pay range reflects the minimum and maximum base salary. Actual offers will be based on factors such as skills, qualifications, experience, location, and role-specific competencies. Some positions may also offer additional compensation, such as bonuses or equity awards.

Position Description

Ryder is hiring a Mobile Maintenance Diesel Technician in Roseville, Michigan — offering weekly pay, excellent benefits, and a Technician career you can feel good about.

Call “Michelle” or text “Roseville” to 9

Hear it from a Ryder Technician Employee Here:

• 
  
• Mobile Technicians are issued a Ryder Mobile Maintenance Truck for Service Calls
  
  
• Hourly Pay: $32.74 per hour
  
  
• Certification Bonus of $100 for each New ASE Certification Obtained up to $700
  
  
• Quarterly Bonus: Ryder Pays you up to $500 Every Quarter - Four Times Per Year
  
  
• Sign On Bonus: Ryder Pays You $750 at 30 days and $750 at 90 days
  
  
• Schedule: Monday–Friday Weekends OFF
  
  
• Hours: Second Shift 3:00 pm – 11:30 pm
  
  

We want the right Mobile Maintenance Mechanic to join us at Ryder to work on Heavy Duty Vehicles

Apply Here with Ryder Today

Spots are filling fast — click apply now to secure your spot.

Questions? Call “Michelle” or text “Roseville” to 9 to speak with your recruiter today.

All the benefits you expect — without the wait.

• 
  
• Medical, Dental, Vision after 30 days
  
  
• 80 hours PTO your first year, starting Day 1
  
  
• Yearly merit pay increases
  
  
• 401 (k) company match
  
  
• PPE, uniforms, and boot allowance
  
  
• Build your skills - paid training
  
  
• Safety‑first workplace & State-of-the-art equipment
  
  
• Top Tech Competition: Earn $250 – $50,000 per year
  
  
• U.S. military veterans - extra paid day off
  
  
• 15% company stock discount
  
  
• Up to $5,000 in Tech tuition repayment
  
  
• 12 weeks paid maternity leave (subject to specific eligibility criteria, including work tenure)
  
  
• Employee discounts on tools, vehicles, travel, tech & more
  
  

Click Here to See All Ryder Careers:

We want YOU to join our family made up of Proud Women and Men in Logistics who work alongside Military Reserve and Veterans we hire everyday

Refer anyone and get rewarded with UNLIMITED bonuses up $1,500 for every Ryder hired Diesel Mechanic, Service Employee, Driver, Warehouse Associate and more!

EEO/AA/Female/Minority/Disabled/Veteran

Requirements

• 
  
• High School diploma or equivalent
  
  
• Vocational or Technical Certification in vehicle maintenance and repair services preferred
  
  
• Must have or meet federal PM certification requirements through any combination of classroom training or work experience totaling 1 year
  
  
• One (1) year or more mechanical experience working offsite at customer locations preferred
  
  
• Must have minimum tools required to perform their job duties as outlined in Ryder's Maintenance policy 2.02
  
  
• Pass a Ryder drug test and previous employer's for the past 3 years, DOT physical, Ryder road test, pass a Ryder Background check and Motor vehicle check including Drug and Alcohol verification from previous employers for the last 3 years
  
  
• Able to take home assigned mobile service truck as applicable and secure vehicle and contents preferred
  
  
• Must be able to drive Ryder vehicles
  
  
• Ability to understand and adhere to Company policies in all areas
  
  
• Proven hands-on mechanic, customer service, and account management skills
  
  
• Ability to complete repair orders with the Company established systems
  
  
• Demonstrates customer service skills. Strong relationship management skills
  
  
• Strong verbal and written communication skills
  
  
• Ability to create and maintain professional relationships within all levels of the organization (peers, work groups, customers, supervisors)
  
  
• Ability to work independently and as a member of a team. Ability to prioritize workload
  
  
• Flexibility to operate and self-driven to excel in a fast-paced environment. Self-starter and self-sufficient approach
  
  
• Capable of multi-tasking, highly organized, with excellent time management skills
  
  
• Detailed oriented with excellent follow-up practices
  
  
• Entrepreneurial spirit
  
  
• Valid NonCommercial Driver License CLASS E, Commercial Driver License (CDL) CLASS A and/or State driver's license as required
  
  
• Preventive Maintenance (PM230&PM298) within 90 Days
  
  
• Other Brakes-Air (BA220&BA298) within 90 Days
  
  
• Other Brake mechanics/inspectors FMCS 396.25
  
  
• Other Hydraulic Brake (BH220&BH298) where appropriate within 90 Days
  
  
• Other Tire & Wheel TW220 within 90 Days
  
  
• Other CF609 & A/C trained and qualified (AC220&AC298) within 180 Days
  
  
• Other Battery Charge and Check, Warranty
  
  
• Other HD electrical - DR208 within 90 Days
  
  
• Other Svc Island Support SBTIII trained (SBT220) and SBT Phase 2 within 180 Days
  
  
• Other OEM on-line engine courses (minimum 2)
  
  
• DOT Safety Regulated Position
  
  
• Safety Sensitive Position
  
  

Regulated Tech:

• 
  
• Must be able to obtain CDL within 6 months after hire
  
  
• Pass a Ryder Drug Test
  
  
• Pass a DOT physical
  
  
• Pass a Ryder road test
  
  
• Pass a Ryder Background and Motor vehicle check including Drug and alcohol verification from previous employers for the last 3 years
  
  

Important Note: Some positions require additional screening that may include employment and education verification; motor vehicle records check and a road test; and/or badging or background requirements of the customer to which you are assigned.

Responsibilities

• 
  
• Interact with customer, exhibit account management skills to independently facilitate preventative maintenance, repair issue resolution, and discuss new repair estimates with customer. Coordinate work schedule as required by customers. Road test vehicles to identify cause of complaints for repairs, ensure quality of repair work performed, and deliver customer satisfaction. Preventive maintenance (PM) and vehicle repairs responsibilities include but is not limited to:
  
  
• A/C & Heater: Operate the system and recognize if the system is cooling or not (PM related); Perform basic system checks such as power to compressor, visual inspection of condenser, belt tension, etc…; Identify Freon and oil leaks
  
  
• Brakes-Air: Identify components of air brake system; Operate brakes and identify irregular noises, air leaks; Perform simple air system tests; Measure lining thickness; Adjust brakes; Perform air brake sections of P.M.; Measure drums, rotors, cam bushings Perform brake repairs per (BA298) once trained and qualified
  
  
• Brakes-Hydraulic: Road test for proper operation; Make visual inspections for leaks; Check park brake operation; Check fluid level; Measure lining thickness; Adjust service brakes; Perform brake repairs per (BH298) once trained and qualified; Adjust park brakes
  
  
• Cargo Handling/Transfer, Liftgates: Identify leaks; Operate lift gate; Identify make and model; Add fluid to bring to proper level; Make minor adjustments to lift platform and its controls; Identify basic malfunctions
  
  
• Charging Systems (electrical): Visually inspect batteries; Clean connections; Check condition of belts; Test batteries; Check alternator mounting and pulley; Replace and adjust belts; Perform basic charging system check
  
  
• Clutch: Lubricate throw-out bearing, linkage, shafts, and cables; Identify proper clutch operation; Identify proper clutch brake operation
  
  
• Cooling Systems: Check and adjust coolant levels; Visually inspect system for leaks; Make minor repairs such as hose replacements, fan shrouds, leaking fittings; Recognize permanent antifreezes and their requirements; Use refractometer; Use pressure tester; Flush and refill systems
  
  
• Cranking System (electrical): Inspect and test batteries; Visually inspect cables and cranking motor; Clean the battery cables, connections and starter; Replace batteries; Charge and check batteries; Replace or repair defective cables
  
  
• Lighting System and Electrical Accessories: Repair minor wiring problems; Replace bulbs, lenses and simple light assemblies; Repair minor lighting problems; Replace and adjust sealed beams; Install or replace accessories such as heated mirrors, fans, spotlights
  
  
• Drive Axles: Inspect housings for leaks; Change oil and filter, if required, and clean breathers
  
  
• Driveline: Lubricate drive line; Inspect components for wear or damage
  
  
• Gas Engines-All Engines: Check and adjust oil levels; Identify unusual noises, and oil leaks
  
  
• Fuel Systems: Replace and prime fuel filter; Check gas and diesel fuel system components such as fuel lines, pickup tubes, return lines, etc... for proper integrity and condition
  
  
• Preventive Maintenance: Proper lube techniques; Minimal tire inspection; Brake check/applied stroke; Battery check; Under vehicle check/loose components; Initial Fault code identification; All PMs (PM298) including C supplements to exclude overheads, engine brake overhauls, DPF servicing, clean doser injector, servicing ArvinMeritor unitized hubs, inspect Lece Neville alternator brushes, inspect modulator system for proper operation, inspect/adjust shift selector cable, pop test Isuzu injectors
  
  
• Steering and Non-driven Axles and Alignment: Lubricate grease fittings, check and adjust fluid levels; Check and adjust toe; Check all steering components for wear; Check and adjust trailer axle alignment; Adjust wheel bearings including replacement of wheel seal
  
  
• Suspension-Chassis and Cab: Identify makes and models; Identify normal operation; Identify and repair minor air leaks; Identify malfunctions of basic nature, broken springs, excessive wear on bushings, etc.
  
  
• Tire and Wheel Maintenance: Perform air pressure checks; Check tread depth; Identify tires that need to be changed or repaired; Perform tire P.M. checks; Replace tire and wheel assemblies; Mount/dismount and rotate tires; Perform tire/wheel checks/repairs per (TW298)
  
  
• Vehicle Coupling System (PM): Lubricate fifth wheel plate and slider mechanism; Operate slider mechanism
  
  
• Utilize key functions of Shop Management System and electronic documentation available. - Perform work in accordance with all federal/ provincial and corporate compliance guidelines (i.e. safety, DOT). Use internal and external maintenance documents
  
  
• Ensure proper maintenance of all service, safety and environmental records required to meet and/or exceed corporate, federal, state, and local government mandated requirements
  
  
• Accountable for key maintenance measurements established by company policy, related to the inspection and performance of PMs, brakes, tires, wheels, including any maintenance items directly associated with the safety of the customer
  
  
• Performs other duties as assigned
  
  

Ryder is proud to be an Equal Opportunity Employer and Drug Free workplace. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a protected veteran, among other things, or status as a qualified individual with disability.

Posted Date 1 month ago (2/19/2026 10:21 AM)

Requisition ID 2

Location (Posting Location) : State/Province MI

Location (Posting Location) : City ROSEVILLE

Location (Posting Location) : Postal Code 48066

Category Technicians/Service Employees8

Employment Type Regular-Full time

Travel Requirements 0-10%

Position Code 1000740

Min Pay USD $32.74/Hr.

Max Pay USD $32.74/Hr.

Job Summary

We are looking for an experienced Low Voltage Project Manager to join our dynamic team in New Jersey.

Responsibilities:

• Lead project execution with subcontractors to plan, coordinate, and install low-voltage systems.
• Prepare complete project estimates through detailed review of drawings, specifications, and site
• conditions.
• Supervise purchasing, logistics, and delivery of all project materials.
• Monitor construction progress to ensure projects are completed on schedule, within scope, and
• within budget.
• Manage financial aspects of contracts, including progress billing, rental equipment, cost tracking,
• and profitability.
• Maintain strong client relationships while protecting company interests.
• Coordinate inspections, testing, commissioning, and project close-out documentation.
• Install, maintain, and troubleshoot CCTV systems, including cameras, NVRs/DVRs, and network
• connectivity.
• Install, configure, and maintain access control systems, including card readers, door controllers,
• locking hardware, and software platforms.
• Perform structured cabling installations for voice, data, fiber, and video systems, including cable
• pathways, tray installation, labeling, and termination.
• Install and support DAS (Distributed Antenna Systems) and cellular signal infrastructure.
• Configure and install network equipment, including switches, routers, access points, and PoE
• systems.
• Diagnose system issues, perform repairs, and ensure compliance with industry standards and
• safety regulations.
• Communicate effectively with internal teams, subcontractors, and clients regarding project status,
• technical requirements, and timelines.

Qualification:

• Minimum 3 years of experience in low voltage installations or a related field (Technician).
• Minimum 5 years of experience in low voltage Project Manager (Project Manager).
• Strong proficiency in cable terminations, structured cabling, and network infrastructure.
• Excellent problem-solving skills and a high attention to detail.
• Valid driver’s license and ability to travel to job sites as required.