Cable Remote Control Jobs Remote Jobs in Usa

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Installing underground cables for power transmission, power distribution, renewable energy and communication networks is a necessary step in hardening the electrical grid, delivering reliable communication networks, and integrating renewable energy into our existing systems.

Michels Underground Cable, Inc. is one of the most trusted underground line and duct bank contractors in the United States. We do it all – from directly burying or installing protective casing for solid and stranded conductors and copper, fiber optic and coaxial cable. Our work improves lives. Find out how a career at Michels Underground Cable, Inc. can change yours.

As a Project Controls Analyst, your key responsibilities will be to support project budgeting and scheduling, monitor cost and schedule performance, and collaborate with project teams to ensure efficient and effective project execution.

Why Michels Underground Cable, Inc.?

• Customers trust us to build cables that will be out of sight, but in high demand
• Our steady, strategic growth revolves around a commitment to quality
• We are family owned and operated
• We invest an average of $5,000 per employee on training each year
• We perform challenging, meaningful work that improves the world
• We believe everyone is responsible for promoting safety, regardless of job title
• We are a part of the Michels family of companies – one of North America’s largest, most diversified energy and infrastructure contractors
• We offer a comprehensive benefits program, including Health, Dental, Life, Flexible Spending Accounts, Health Savings Account, Short Term and Long Term Disability Insurance, 401(k) plan, Legal Plan, and Identity Theft and Monitoring Plan. Depending on your positions and location you may participate in a different benefit plan.

Why you?

• You like to surround yourself with dedicated, value-driven people
• You relish new challenges and evolving technology
• You cringe when you hear: “Because that’s the way we’ve always done it.”
• You like to know your efforts are noticed and appreciated
• You want to make your own decisions, but know support is always available
• You want to work to make a difference in people’s lives

What it takes?

• 0-3 years of related experience in project controls, finance, accounting, or construction operations
• Bachelor’s degree in Business, Business Administration, Finance, Accounting, or related field
• Training or exposure to project cost control, scheduling, and forecasting processes
• Proficiency in Microsoft Office Suite, particularly Microsoft Excel
• Strong analytical, organizational, and problem-solving skills with the ability to meet deadlines independently
• Ability to travel to job-sites when needed

A leader in technology and innovation, Southwire Company, LLC is one of North America’s largest wire and cable producers. Southwire and its subsidiaries manufacture building wire and cable, utility products, metal-clad cable, portable and electronic cord products, OEM wire products and engineered products.

Industrial Maintenance Controls Technician

Location: Pleasant Prairie, WI

Compensation: $36 - $39 hour

Shift: Monday – Friday ~ days

Pension plan!!

As an Industrial Maintenance Controls Technician, you will support our manufacturing operations by providing a full range of electronic equipment maintenance with focus on reliability. Ensure sustainable operation of machinery and equipment by completing preventive maintenance requirements on motors, conveyor systems, and other production machinery. The Industrial Maintenance Controls Technician will also be a key member of process improvement and problem-solving teams.

Qualifications and Experience Requirements

• Associates degree or higher required
• PLC experience is required
• Strong Mechanical and Electrical background (up to 480v)
• Hydraulic and pneumatic experience
• Ability to interpret technical drawings, schematics and OEM manuals
• 5 years of industrial manufacturing maintenance experience
• Possesses strong computer skills (Word, Excel, PowerPoint, Outlook, CMMS, etc.)

Industrial Maintenance Controls Technician Job Description

• Troubleshoot equipment malfunctions using logical and systematic methodologies.
• Routine maintenance including but not limited to field fault analysis, calibration of instrumentation using proper test equipment, component replacement, alignment and calibration to specification.
• Troubleshoot and repair various equipment to include electronic, digital equipment and AC/DC motors & controls.
• Fault analysis of hard-wired relay logic, motor control circuits, motor power circuits (single & 3 phase) and common utility/lighting circuits.
• Access and use PLC logic programming to troubleshoot production equipment.
• Replacement of identified failed parts or components.
• Adjust equipment to bring it into operational specifications.
• Recommend process or procedure changes based on observed equipment behavior.
• Testing of electrical systems and continuity of circuits in electrical wiring, using testing devices such as ohmmeters, and voltmeters to ensure proper operation and safety of system.
• Install, examine, replace or repair electrical wiring, receptacles, switch boxes, conduits, lighting fixtures and other electrical components.
• Maintain current and accurate maintenance data to establish historical records and future maintenance requirements.

Benefits We Offer:

• 401k with Matching & Pension Plan (Eligible for Pension after 1,000 Hours Worked)
• Family and Individual Insurance Packages (Health, Life, Dental, and Vision)
• Paid Time Off & Paid Holidays
• Long & Short-Term Disability
• Supplemental Insurance Plans
• Employee Assistance Program
• Employee Referral Program
• Tuition Reimbursement Programs
• Advancement & Professional Growth opportunities
• Parental Leave
• & More

Southwire is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status, or any other characteristic protected by law.

JOB DESCRIPTION

We are seeking an experienced Cable & Harness Technician II and III to support aerospace manufacturing in Gilbert, AZ. This is a hands‑on, on‑site role focused on building complex space‑flight cable and wire harness assemblies in a high‑reliability environment.

What You’ll Do

• Build and assemble complex cable and wire harnesses from schematics, wiring diagrams, and wire lists
• Perform connectorization, point‑to‑point wiring, and heavy soldering of large wire bundles
• Work in an ESD/FOD‑controlled manufacturing environment
• Lay out and build harnesses using harness boards
• Mix and apply bonding, potting, and encapsulation materials
• Use soldering irons, heat guns, tweezers, and hand tools
• Maintain clean, organized workstations and follow aerospace workmanship standards

REQUIRED SKILLS AND EXPERIENCE

• High School Diploma or GED
• 2-6 years electrical assembly and wiring experience
• Experience with the following: (will help them get cert but must have knowledge)
• IPC 620 or IPC WHMA‑A‑620
• J‑STD
• Experience reading drawings and wiring diagrams

• 
  
• Read and interpret basic engineering drawings for mechanical components and cable assemblies to verify compliance with specifications.
  
• Perform receiving inspection and/or product-level inspection to determine material conformance.
  
• Use basic measuring tools (calipers, micrometers, gauges, microscopes, etc.) to verify dimensional and visual requirements.
  
• Perform inspection of electronic assemblies and cable assemblies for workmanship and labeling accuracy.
  
• Identify and document nonconforming material.
  
• Process nonconformance records in QT9, including data entry and supporting documentation.
  
• Maintain accurate inspection records and ensure proper material status identification.
  
• Communicate inspection findings to QC Manager and internal departments as required.
  
• Assist with sorting, rework verification, and containment activities when needed.
  
• Support organization and maintenance of inspection areas and documentation.
  
• Other duties as assigned.
  

• 
  
• High School Diploma or GED required.
  
• Minimum 2 years of quality inspection experience in a manufacturing or production environment preferred.
  
• Basic understanding of electronic or electro-mechanical assemblies is a plus.
  
• Experience working within a documented quality system (ISO 9001 preferred).
  
• Familiarity with inspection tools and measuring equipment.
  
• Experience entering data into ERP or quality management systems is a plus.
  

• 
  
• Strong attention to detail and disciplined inspection habits.
  
• Ability to follow written procedures and work instructions accurately.
  
• Comfortable inspecting small components and assemblies under magnification.
  
• Ability to stand, sit, and move between inspection stations for extended periods.
  
• Basic computer skills and proficiency in Microsoft Office.
  
• Clear verbal communication skills.
  
• Ability to write concise and legible inspection notes.
  
• Reliable attendance and punctuality.
  
• Willingness to ask questions when requirements are unclear.
  
• Ability to work independently once trained.
  

• 
  
• Medical, vision and dental insurance
  
• 401(k) with company match (100% of the first 4% in eligible compensation)
  
• Flexible Spending Account
  
• 2 weeks paid vacation
  
• 1 Week sick pay
  
• 10 company holidays
  
• Group life insurance
  

• Hourly: $26 - $34

Weeks Group, LLC is a leading construction firm specializing in the development of advanced data center facilities. With a strong commitment to innovation, quality, and client satisfaction, we deliver cutting-edge solutions that address the dynamic needs of the data center industry. As we continue to expand, we are seeking a skilled and experienced Data Center Construction QAQC Manager to join our dream team. We are not headhunters. We don't just put butts in seats. We are a dream team of experts in the industry to thrive from solving problems and getting things done!

Weeks Group's Values:

We Answer the Call

Integrity- Honesty-Trust- Nimbleness

We Don’t Take No for an Answer

Persistence- Determination- Accountable

We Solve Problems

We Work Hard and Reward Well

Within Challenging, Intense Projects

We Expect the Best from Each Other

Teamwork- Communication

We BTFM

Innovative- Disdain for Mediocrity

If you don't have data center experience or don't align with our values, no need to apply.

Employment Type: Full-time-Traveling position option

Project Type: Hyperscale / Mission Critical Data Centers – Brownfield (live campus / retrofit / expansion)

Reports To: Project Director / Director of Construction Operations

Role Summary

We’re hiring an On-Site QA/QC Manager to lead the quality program on brownfield hyperscale data center construction—where safety, uptime, and precision matter as much as speed. You’ll own electrical QA/QC planning and execution, drive rigorous documentation, and ensure installations meet strict client standards, contract requirements, and code while working in/around live critical environments. This role supports readiness for energization, commissioning, and IST with strong change control and zero-surprise turnover.

What You’ll Do

• Own and maintain the Project Quality Plan (PQP) tailored for brownfield constraints (phasing, outages, access controls, change control).
• Build and manage electrical Inspection & Test Plans (ITPs), checklists, and hold/witness points—by system, room, and phase.
• Lead daily QA/QC field execution and verification against IFC drawings, approved submittals, vendor IOMs, RFIs, and method statements.
• Drive quality for the electrical critical path, including (as applicable):
• MV/LV distribution: switchgear, transformers, breakers, relays, terminations
• UPS/battery systems: installation verification, clearances, labeling, startup readiness
• Generators/paralleling gear: interface readiness, documentation capture, punch closure
• Busway/PDUs/RPPs: supports, alignment, tap boxes, labeling, grounding/bonding
• Cable tray/conduit: routing, supports, firestopping, separation, workmanship standards
• Grounding & bonding: integrity verification and as-built accuracy
• Controls/EPMS/BMS electrical interfaces: device placement, labeling, point-to-point readiness (as assigned)
• Enforce brownfield-specific quality disciplines:
• Verify phasing plans and temporary power installs meet requirements
• Maintain as-built accuracy in real time due to live site impacts and field changes
• Coordinate quality gates tied to shutdown windows, cutovers, and turnover milestones
• Manage deficiency systems: NCRs, punch lists, rework prevention, corrective/preventive action (CAPA), re-inspections, and verified closeout.
• Partner tightly with Operations, Controls, Commissioning, and Safety to ensure quality supports uptime protection and controlled energization.
• Own electrical turnover packages: inspection reports, test results, redlines/as-builts, O&Ms, training logs, vendor startup documentation, commissioning support documentation.
• Provide weekly reporting: trends, repeat issues, risk register inputs, and 2–6 week quality look-ahead tied to phasing and outage schedules.

Qualifications

• 7+ years QA/QC experience on mission critical construction with strong electrical focus; brownfield/live siteexperience strongly preferred.
• Proven success running PQP/ITP programs, NCR/punch systems, and turnover documentation on fast-track or phased retrofits.
• Strong ability to interpret one-lines, schematics, control wiring diagrams, specs, and vendor documentation.
• Working knowledge of NEC/NFPA 70 and typical hyperscale QA requirements (labeling standards, documentation rigor, readiness gates).
• Highly organized, strong communicator, and able to coordinate across multiple trades, vendors, and stakeholders in a controlled environment.

Preferred

• Experience supporting cutovers, shutdown windows, energization planning, commissioning readiness, and IST
• Familiarity with NFPA 70E-related interfaces and verification of torque/labeling/test documentation programs
• Certifications: CQM-C, ASQ (CQA/CQE), OSHA 30
• Tools: Procore, ACC/BIM 360, Bluebeam, PlanGrid

What Success Looks Like

• Zero “surprise” quality issues during shutdown windows and cutovers
• Electrical systems pass startup/commissioning on first attempt
• NCR/punch stays controlled and closes quickly ahead of milestones
• Turnover packages are complete, accurate, and accepted without rework

Benefits

• Competitive compensation + bonus potential
• Health/dental/vision, 401(k), PTO
• Per diem/vehicle allowance (if applicable)
• Growth path within hyperscale mission critical delivery

Job Title: I&C Design Engineer

Employment Type: Direct Hire

Location: Dallas, TX – (onsite 4 days/week, off every other Friday)

Salary: $110-130k

Benefits:

• Medical, Dental, Vision
• Life Insurance
• 401k
• PTO
• Holiday

Summary:

Akkodis is seeking an I&C Design Engineer for a DIRECT HIRE position in the Dallas, TX area. The desired candidate will have 5+ years of previous experience design for electrical instrument and controls. The I&C Engineer will be responsible for the design/development of industrial control systems including SCADA, PLC, and HMI systems. This is an excellent opportunity to support an exciting company in the electrical engineering industry.

***Remote 1 day/week, and off every other Friday***

Responsibilities:

• Site assessment and determination of needed instrumentation/SCADA upgrades
• Review of existing project documents – P&ID, system architecture, electrical drawings
• Coordination with clients on specific needs
• Document findings – Write assessment or report of existing conditions and recommendations
• Design/development of project drawings, including P&ID, system architecture, loop diagrams, installation details
• Create project specifications, including instrumentation, networking, control narrative strategies, software and hardware requirements for SCADA, PLC, and HMI systems
• Quality Control/Quality Assurance of project documents
• Attend/Conduct project meetings with client
• Review and comment on project submittals
• Coordination with Electrical Engineering Department

Required Skills:

• Bachelors Degree in an Engineering related field is required.
• A minimum of 5 years of relevant I&C experience is required.
• MUST HAVE PE or EIT and sitting for PE soon.
• Must have experience designing SCADA, PLC, and HMI systems.
• Strong background in AutoCAD is preferred.
• Registered Professional Engineer (PE) or Engineer-in-Training (EIT) in Texas is required.
• Experienced in the design of construction documents.
• Write Technical Memoranda based on site assessment.
• Drawing/PDF markups.
• Design relay schematics (motor control).
• PLC and SCADA HMI development and creation of PLC I/O lists
• Wide Area Network (WAN) design, including radio and cellular communications
• Fiber optic cable specification
• Control panel design
• VFD design/interface
• Physical and cybersecurity assessment and design preferred.
• A proactive, solution-oriented approach to challenges, with a focus on team success.
• Strong ability to foster and maintain professional, cross-functional relationships.

If you are interested in this I&C Engineer job, then please click apply through Akkodis.

Equal Opportunity Employer/Veterans/Disabled

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records.

Client Notes: 3rd shift

Job Description

Primary Purpose: The Maintenance Technician plays a critical, hands-on role in supporting plant uptime and performance. This position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations. The ideal candidate is a strong problem solver, highly responsive, and thrives in a fast-paced manufacturing environment

Primary Duties & Responsibilities

Real-Time Equipment Support & Troubleshooting

• Immediately respond to breakdowns and perform on-the-spot repairs to restore production.
• Troubleshoot electrical, mechanical, pneumatic, and hydraulic systems, including PLC I/O and instrumentation.
• Collaborate with operators to identify and resolve root causes of equipment malfunctions.
• Support line changeovers and production start-ups.

PLC and Electrical Control Support

• Diagnose and repair PLCs, HMIs, VFDs, and control-related issues.
• Troubleshoot systems using tools such as Allen-Bradley RSLogix 5000.
• Assist with equipment upgrades, installations, and control panel builds.
• Run conduit, pull wire, and terminate Ethernet and communication cabling.

Preventive Maintenance and Continuous Improvement

• Perform scheduled preventive maintenance with focus on reliability and efficiency.
• Take ownership of specific PM areas and proactively improve them.
• Accurately document all maintenance activities in the CMMS.
• Identify recurring issues and propose long-term corrective actions.

Project and Fabrication Work

• Assist in machinery installation and facility improvement projects.
• Perform light fabrication and welding for safety and efficiency-related improvements.

Safety & Communication

• Always follow safety protocols and use proper PPE.
• Keep work areas clean, organized, and free from hazards.
• Attend and contribute to daily shift meetings and status updates.

Key Attributes & Abilities

• Strong problem-solving and troubleshooting skills.
• Ability to work under pressure and make fast, informed decisions.
• Good communication and team collaboration abilities.
• High personal accountability, attention to detail, and reliability.
• Open-minded and eager to learn new systems and technologies.
• Willing to work 8- or 12-hour shifts depending on business demands, with overtime as needed.

Qualifications & Experience

• High school diploma or equivalent required; technical certifications or trade school training preferred.
• Minimum 4 years of industrial maintenance experience, preferably in a manufacturing environment.
• Demonstrated experience with PLC troubleshooting and industrial electrical systems.
• Working knowledge of RS Logix 5000 or similar programming environments preferred.
• Ability to interpret electrical, hydraulic, pneumatic, and mechanical schematics.
• Basic welding and fabrication skills.
• Understanding of Lean principles, 5S, and Root Cause Analysis is a plus.
• Familiarity with CMMS platforms for logging repairs, PMs, and work orders; ability to navigate and input data accurately.

Physical Requirements

• Must be able to remain on the factory floor for long periods of time, potentially a full shift
• Ability to lift, push, pull, or carry up to 50 lbs.
• Ability to crouch, bend, kneel, squat, twist, reach, and stand for extended periods
• Ability to perform equipment maintenance tasks requiring full-body movement and sustained physical effort
• Requires full range of motion in arms, hands, and fingers to reach, grasp, hold, push, pull, twist, and use tools
• Must be able to climb and work on ladders
• Ability to stay alert and react quickly to plant conditions
• Schedule may require 40+ hours per week to support manufacturing production.
• Compensation

Quality Inspector

Overview

Join our client’s team as a QA/QC Inspector supporting a variety of construction projects. In this hands-on role, you will inspect installations, ensure compliance with project specifications, and maintain high-quality standards across electrical, civil, and structural work.

Why Work Here

• Great company culture and atmosphere
• Room to grow and learn

Key Responsibilities

• Perform QA/QC inspections on assemblies, installations, and equipment
• Implement project-specific Quality Plans and Inspection/Test Plans (ITPs)
• Identify, document, and track deficiencies and corrective actions
• Coordinate with Materials Management on non-conforming or damaged materials
• Maintain Master Punch Lists and assemble QA/QC documentation packages
• Inspect site preparation, foundations, concrete, structural steel, electrical cabling, substation/BESS equipment, and control buildings

Requirements & Qualifications

• Post-secondary education in a related field
• 3+ years of experience in Construction QA/QC or related construction roles
• Strong technical document interpretation skills
• Valid driver’s license and ability to travel to field sites

Preferred Skills

• Power systems experience (Substations, BESS, Transmission, Distribution)
• Civil, structural, and electrical installation experience
• Knowledge of concrete, piling, and earthworks
• Familiarity with Bluebeam Revu or Procore
• Trade certification or professional designation (preferred)

Main Duties / Required:

• 7 plus years related experience or equivalent role
• OHSA 30 certification
• Must meet Motor Vehicle Record requirements.
• Must meet all requirements to be properly badged and able to meet all client requirements to access the jobsite.
• Familiar with construction management software as needed.
• Proficient with Microsoft office.
• AutoCAD, a plus for use with scheduling, spreadsheets, and cost control
• Proficient in understanding building plans and specifications
• Team player with field supervision, project management and company administration
• staff
• Excellent communication skills.
• Good understanding of building systems.
• Thorough knowledge of legal issues and safety standards is essential.
• Ability to plan and organize a team effort.
• Good client management and goodwill building ability.
• Capacity to motivate, lead and boost morale of the teams.
• Effective time management and logical decision-making ability.
• Capacity to handle pressure.
• Strong focus on quality and safety.
• Ability to remain calm, focused, and effective under pressure situations.
• Self-starter with ability to set goals and tasks with strong leadership skills