Cable Communications Jobs in Usa

Overview
Georgia Tech prides itself on its technological resources, collaborations, high-quality student body, and its commitment to building an outstanding and diverse community of learning, discovery, and creation. We strongly encourage applicants whose values align with our institutional values, as outlined in our Strategic Plan. These values include academic excellence, diversity of thought and experience, inquiry and innovation, collaboration and community, and ethical behavior and stewardship. Georgia Tech has policies to promote a healthy work-life balance and is aware that attracting faculty may require meeting the needs of two careers.

About Georgia Tech
Georgia Tech is a top-ranked public research university situated in the heart of Atlanta, a diverse and vibrant city with numerous economic and cultural strengths. The Institute serves more than 45,000 students through top-ranked undergraduate, graduate, and executive programs in engineering, computing, science, business, design, and liberal arts. Georgia Tech's faculty attracted more than $1.4 billion in research awards this past year in fields ranging from biomedical technology to artificial intelligence, energy, sustainability, semiconductors, neuroscience, and national security. Georgia Tech ranks among the nation's top 20 universities for research and development spending and No. 1 among institutions without a medical school.

Georgia Tech's Mission and Values
Georgia Tech's mission is to develop leaders who advance technology and improve the human condition. The Institute has nine key values that are foundational to everything we do:
1. Students are our top priority.
2. We strive for excellence.
3. We thrive on diversity.
4. We celebrate collaboration.
5. We champion innovation.
6. We safeguard freedom of inquiry and expression.
7. We nurture the wellbeing of our community.
8. We act ethically.
9. We are responsible stewards.

Over the next decade, Georgia Tech will become an example of inclusive innovation, a leading technological research university of unmatched scale, relentlessly committed to serving the public good; breaking new ground in addressing the biggest local, national, and global challenges and opportunities of our time; making technology broadly accessible; and developing exceptional, principled leaders from all backgrounds ready to produce novel ideas and create solutions with real human impact.

The Electrical Integrator L2 will provide technical support to program managers, project directors, task leads, and senior-level Electrical Integrators. The Electrical Integrator L2 will help with mid-level troubleshooting, repair, and maintenance of electrical cables, circuits, and assemblies.

This position will interact on a consistent basis with: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position typically will advise and counsel: faculty and staff project/task leaders, technical leads, contractors, and vendors

This position will supervise: N/A

Job Duty 1 -
Support program managers, project directors, and task leads with mid-level electrical assembly work such as cable assembly fabrication, and electrical chassis fabrication and assembly

Job Duty 2 -
Help with mid-level testing and troubleshooting of circuits and systems

Job Duty 3 -
Provide intermediate levels of maintenance and repair of printed circuit boards and printed circuit board assemblies

Job Duty 4 -
Assist with kitting parts using a Bill of Materials or other online inventory tools; help provide data entry for online inventory tools

Job Duty 5 -
Support other work teams, as needed, with skills such as mechanical assembly, welding, metal work, drafting, parts inventory, and technical documentation

Job Duty 6 -
Provide guidance to more junior-level technicians

Job Duty 7 -
Perform other job-related duties as assigned

Educational Requirements
Technical Diploma, Associate's Degree, or two years college course work, or an equivalent combination of education and experience

Required Experience
Two to five years of job-related experience

Preferred Experience
IPC-610
IPC-620
J-STD-001
IPC-7711
IPC-7721

ABILITIES
Experience using crimping tools preferred

KNOWLEDGE
Familiarity with hand tools and a basic understanding of AC/DC circuits; a basic understanding of RF cables and build processes preferred

SKILLS
Basic skills in PCB assembly, electrical assembly wiring, and soldering preferred

The University System of Georgia is comprised of our 26 institutions of higher education and learning as well as the System Office. Our USG Statement of Core Values are Integrity, Excellence, Accountability, and Respect. These values serve as the foundation for all that we do as an organization, and each USG community member is responsible for demonstrating and upholding these standards. More details on the USG Statement of Core Values and Code of Conduct are available in USG Board Policy 8.2.18.1.2 and can be found on-line at policymanual/section8/C224/#p8.2.18_personnel_conduct.

Additionally, USG supports Freedom of Expression as stated in Board Policy 6.5 Freedom of Expression and Academic Freedom found on-line at policymanual/section6/C2653.

The Georgia Institute of Technology (Georgia Tech) is an Equal Employment Opportunity Employer. The University is committed to maintaining a fair and respectful environment for all. To that end, and in accordance with federal and state law, Board of Regents policy, and University policy, Georgia Tech provides equal opportunity to all faculty, staff, students, and all other members of the Georgia Tech community, including applicants for admission and/or employment, contractors, volunteers, and participants in institutional programs, activities, or services. Georgia Tech complies with all applicable laws and regulations governing equal opportunity in the workplace and in educational activities.

Georgia Tech prohibits discrimination, including discriminatory harassment, on the basis of race, ethnicity, ancestry, color, religion, sex (including pregnancy), sexual orientation, gender identity, gender expression, national origin, age, disability, genetics, or veteran status in its programs, activities, employment, and admissions. This prohibition applies to faculty, staff, students, and all other members of the Georgia Tech community, including affiliates, invitees, and guests. Further, Georgia Tech prohibits citizenship status, immigration status, and national origin discrimination in hiring, firing, and recruitment, except where such restrictions are required in order to comply with law, regulation, executive order, or Attorney General directive, or where they are required by Federal, State, or local government contract.

More information on these policies can be found here: policymanual/section6/c2714 Board of Regents Policy Manual | University System of Georgia ( ).

This is not a supervisory position.
This position does not have any financial responsibilities.
This position will not be required to drive.
This role is not considered a position of trust.
This position does not require a purchasing card (P-Card).
This position will not travel.
This position does require the ability to obtain and maintain a security clearance.
This position is located in Atlanta, GA
Salary Job Grade A11
Recruiting Range: $ $23.99 to $32.62 based on experience

Successful candidate must be able to pass a background check. Please visit employment/pre-employment-screening.

Amteck, a nationally recognized Top 50 Electrical Design-Build Contractor, is redefining what it means to deliver excellence in electrical construction. With decades of experience and a reputation built on a people-first culture, integrity, innovation, and customer satisfaction, we’re proud to be at the forefront of the industry.

We are seeking a Project Manager to drive excellence in our cutting-edge Technologies division. From structured cabling to integrated security and AV systems, you'll lead teams that power the backbone of intelligent buildings nationwide.

The Technologies Project Manager leads the execution of low-voltage electrical and critical systems projects, including structured cabling, physical security (access control, CCTV, intrusion), audiovisual, and wireless connectivity. This role ensures project delivery excellence for clients across industries such as financial services, data centers, healthcare, manufacturing, hospitality, retail, and technology. The Project Manager is accountable for safety, quality, schedule, and financial performance, collaborating with cross-functional teams to achieve organizational objectives.

This position will be based out of Dyersburg, TN, and will require travel.

Key Responsibilities

• Oversee all phases of project execution, from planning and scheduling to closeout, ensuring adherence to budget, timeline, and quality standards.
• Lead project kickoff meetings, define schedules, and conduct site walk-throughs with stakeholders.
• Coordinate with supervisors, contractors, and suppliers to manage project progress, material deliveries, and shop drawing requirements.
• Manage workforce planning, performance, and development of installation teams.
• Maintain proactive communication with clients, subcontractors, and internal teams to ensure project alignment and client satisfaction.
• Track and report on project costs, profitability, and change orders; approve invoices and timesheets.
• Ensure compliance with safety protocols and provide necessary training and PPE.
• Conduct on-site inspections and deliver required closeout documentation, including as-built drawings and certification reports.
• Foster relationships with clients, subcontractors, and vendors to support business growth and continuous improvement.

Qualifications

• Bachelor’s degree in Construction Management, Engineering, Business Management, or equivalent experience preferred.
• 1-5 years of project management experience in construction or telecommunications, with a background in low voltage systems (copper, fiber, grounding).
• Demonstrated leadership in leading projects and teams.
• Proficiency in project management software preferred (e.g., MS Office, Bluebeam, MS Project).
• Strong analytical, organizational, and communication skills.
• Certifications such as PMP, RTPM, BICSI Technician, or RCDD are preferred.
• OSHA 10 or 30 are advantageous.
• Valid driver’s license and willingness to travel as required.

Core Competencies

• Planning and execution
• Project related budget management
• Team leadership and mentoring
• Client and stakeholder engagement
• Quality assurance and process improvement
• Change management and documentation

Work Environment & Physical Requirements

• Primarily office-based with regular site visits.
• Occasional lifting (up to 50 pounds) and after-hours work may be required.
• Reasonable accommodations available for individuals with disabilities.

Ready to build what’s next? Apply with us today!

In 1977 Amteck was founded in Central Kentucky with the belief that growth only comes by listening and responding to both clients and employees. Four decades later, Amteck has grown from a small electrical contracting firm to a national leader in the design/build support electrical contracting industry. Amteck specializes in facility growth expansion initiatives of companies that operate in the manufacturing, industrial, process, food, and beverage, hospitality, healthcare, distribution facilities, and commercial and institutional sectors. The number one goal is the Safety of our Employees and maintaining our culture and core values: THE AMTECK WAY – SAFETY, QUALITY, & CUSTOMER SATISFACTION.

IPC Technical Trainer – Job Posting

Job Details

• Job Title: IPC Technical Trainer
• Location: On-site
• Shift: Standard business hours, Monday–Friday
• Work Type: 6 Month contract to hire
• Typical Pay Range: $80

Overview / Job Description

A leading electronics manufacturing organization is seeking an experienced IPC Technical Trainer to develop and deliver training programs focused on IPC standards, hand soldering, cable assembly, and quality best practices. This role is key in elevating workforce competency, ensuring compliance with industry standards, and supporting continuous improvement across production teams.

The ideal candidate brings strong manufacturing experience, IPC certifications, a quality mindset, and a passion for teaching hands-on skills.

Key Responsibilities

• Deliver training on IPC standards, hand soldering, and cable assembly.
• Develop and update training materials to align with current industry standards.
• Evaluate trainee skills through written and hands-on assessments.
• Maintain accurate training records, certifications, and attendance logs.
• Implement continuous improvements based on feedback and IPC updates.
• Ensure all training reinforces quality, safety, and AS9100-aligned practices.

Required Skills & Experience

• High school diploma or equivalent
• 3–5+ years of experience in electronics manufacturing
• IPC certification (CIT or CIS) in IPC-A-610, IPC/WHMA-A-620, and/or IPC-J-STD-001
• Strong knowledge of IPC standards & best practices
• Hand soldering and cable assembly expertise
• Strong written, verbal, and presentation skills
• Ability to create and deliver multimedia training
• Excellent organization and attention to detail
• Background in quality systems (QMS); familiarity with AS9100
• Auditor certification (internal or external)

Plusses

• Experience training in high‑reliability or aerospace/defense environments
• Experience developing e-learning or digital training modules
• Prior experience as a production lead, quality inspector, or manufacturing supervisor
• Advanced soldering or rework certifications

Company Description

MSS, Inc., based in Nashville, Tennessee, designs and manufactures advanced sensor-based optical sorting equipment for the recycling and waste management industry. Since 1974, MSS has served a variety of applications, including single and dual-stream MRFs, plastic recycling, construction and demolition recycling, metal recycling, and electronic scrap processing. As a division of the CPG Group, MSS is part of a team dedicated to delivering high-quality recycling equipment and turnkey systems to empower customers as industry leaders.

Role Description

This is a full-time, on-site role located in Nashville, TN, for a Field Installation Technician. The Field Installation Technician’s primary responsibilities will be the assembly and setup of the

equipment for a customer project. This will include coordinating with the Service Manager,

Project Manager, subcontractors and customer the installation of the machinery and equipment

in the customer facility. The installation will include testing and adjusting or recommendations to

bring the equipment to an operating state.

Complete tasks related to the installation, power up and setup of the equipment and software.

This position will install machine components, route and terminate pneumatic lines, route and

terminate flexible electrical conduits and the related wiring/cabling

Responsibilities:

• Install, commission, maintain, repair, and set up sensor-based sorting equipment.
• Assemble machine components and perform mechanical alignment using hand and power tools.
• Route and terminate pneumatic lines, electrical conduits, and wiring/cabling.
• Conduct pre-shipment testing and quality control following company procedures.
• Perform onsite service, preventative maintenance, and equipment cleaning.
• Produce detailed service reports, PM trip reports, and other required documentation.
• Establish strong relationships with customers and maintain clear communication.
• Support the production team as needed.
• Perform other duties as assigned.

Required Qualifications:

• 2+ years of hands-on experience in similar duties.
• Ability to follow instructions and retain technical information.
• Adaptability and flexibility to changing priorities.
• Strong communication skills for collaborating with coworkers, management, customers, and subcontractors.
• Proficiency with hand tools, power tools, meters, and gauges.
• Ability to read mechanical and electrical blueprints and schematics.
• Ability to work efficiently under time constraints.

Preferred Qualifications:

• Knowledge of machine design, repair, and maintenance.
• Understanding of electrical and electronic circuits and diagnostic tools.
• Basic knowledge of mechanical, pneumatic, and electrical systems.
• General PC skills, including minor troubleshooting.
• Prior ERP experience.
• Bilingual English-Spanish preferred.

Licenses/Certifications:

• Valid driver’s license with a clean record.
• Ability to obtain a passport.

Work Conditions:

• Work in indoor and outdoor environments.
• Flexible shifts with the ability to adapt to changing schedules at customer sites.
• On-call availability with possible overtime or weekend work.
• Ability to lift up to 70 lbs.

Travel:

• Travel to customer job sites is required, including weekend and multi-week trips.
• Estimated time away from the office: 30–40%.

MSS, Inc.

300 Oceanside Dr, Nashville, TN 37204

651-578-12669 |

Akkodis is seeking a Senior Mechanical Engineer for a 3+ Contract position with a client located in Waukegan, IL

Pay Range: $50/hr - $60/hr (The rate may vary based on experience, education, geographic location, and other factors.)

Position Responsibilities

We are seeking a highly skilled Senior Mechanical Engineer with strong experience designing mechanical solutions for electrical and electromechanical systems. This role focuses on sheet metal design, electrical component placement, enclosure design, and wire harness routing, with an emphasis on delivering robust, manufacturable designs that integrate seamlessly with electrical system requirements.

Key Responsibilities

• Lead mechanical design efforts for electromechanical products including enclosures, chassis, brackets, and system-level packaging.
• Create detailed 3D models and engineering drawings using CREO or SolidWorks, including GD&T, BOMs, and tolerance stack-ups.
• Develop sheet metal designs that meet structural, thermal, manufacturability, and cost requirements.
• Plan and execute electrical component placement, mechanical packaging, and integration with PCBs, power supplies, connectors, and cable assemblies.
• Design and route wire harnesses and cable assemblies to ensure proper fit, bend radius, and strain relief.
• Partner closely with Electrical Engineers to ensure design compatibility, grounding, shielding, and component accessibility.
• Work with Manufacturing Engineering to optimize designs for fabrication processes such as sheet metal forming, machining, injection molding, and assembly.
• Collaborate with Application Engineering to incorporate customer requirements and field-use conditions.
• Perform thermal, structural, and airflow considerations in mechanical layouts.
• Support prototype builds, testing, validation, and design revisions.
• Participate in design reviews, risk assessments, DFMEA, and continuous improvement initiatives.
• Maintain engineering documentation, revision control, and compliance with internal standards.

Required Skills

• Bachelor’s degree in mechanical engineering or related field.
• 6+ years of mechanical design experience in an electromechanical or electronics-packaging environment.
• Proficiency in CREO or SolidWorks (assembly modeling, surfacing, sheet metal, drawings).
• Experience with sheet metal enclosure design, component packaging, and mechanical layout for electrical systems.
• Experience with wire harness layout/design and cable management.
• Strong understanding of manufacturing processes, DFM/DFA, and design best practices.
• Experience with thermal management, airflow design, or electronics cooling.
• Familiarity with regulatory and safety standards (UL, IEC, CE, etc.).
• Knowledge of vibration and shock testing for critical infrastructure products.

If you are interested in this Senior Mechanical Engineer job, then please click APPLY NOW. For other opportunities available at Akkodis go to If you have questions about the position, please contact Sunny Kumar at

Equal Opportunity Employer/Veterans/Disabled

Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, an EAP program, commuter benefits, and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Disclaimer: These benefit offerings do not apply to client-recruited jobs and jobs that are direct hires to a client.

To read our Candidate Privacy Information Statement, which explains how we will use your information, please visit Company will consider qualified applicants with arrest and conviction records by federal, state, and local laws and/or security clearance requirements, including, as applicable:

· The California Fair Chance Act

· Los Angeles City Fair Chance Ordinance

· Los Angeles County Fair Chance Ordinance for Employers

· San Francisco Fair Chance Ordinance

• 
  
• Perform incoming, in-process, and final inspections per documented requirements
  
• Inspect PCBAs, mechanical components, and cable assemblies (visual and dimensional)
  
• Enter inspection results into the manufacturing execution system
  
• Generate nonconformance and defect reports
  
• Read and interpret specifications and part prints
  
• Monitor critical equipment and instrumentation
  
• Enforce FOE/FOD, ESD, and calibration protocols
  
• Communicate quality issues and assist in problem resolution
  
• Support Quality Assurance activities for engineering and operations
  
• Comply with all safety, quality, and workplace regulations
  

• 
  
• Maintain compliance with ISO-9001 and/or AS9100 quality systems
  
• Ensure documentation accuracy and traceability
  
• Support internal audits and quality initiatives
  
• Maintain a clean, organized, and audit-ready work area
  
• Work overtime as needed to meet production demands
  

• 
  
• High School Diploma or equivalent
  
• Minimum 2 years of incoming inspection experience in a manufacturing QC environment
  
• Knowledge of PCBA inspection
  
• IPC-A-610 certification or previous certification required
  
• Experience working in ISO-9001 and/or AS9100 environments
  
• Ability to read and interpret specifications and part prints
  
• Proficiency with Microsoft Office (Excel, Word, PowerPoint, Outlook)
  
• Ability to work under a microscope for extended periods
  
• Ability to meet U.S. export control eligibility requirements
  

• 
  
• Experience with Aegis Factory Logix
  
• Aerospace or defense industry experience
  
• Experience with wire bond or die attach inspection
  

• 
  
• Detail-oriented with a strong quality-first mindset
  
• Comfortable working in a structured, compliance-driven environment
  
• Disciplined in documentation and traceability
  
• A collaborative team player who communicates clearly
  
• Committed to safety, ESD, and FOD prevention standards
  

• 
  
• Performance-based bonus opportunities
  
• Medical, life, and disability insurance
  
• Company-paid holidays and paid time off
  
• 401(k) retirement plan
  
• Discounted employee stock purchase plan
  
• Tuition reimbursement
  
• Professional development platforms (LinkedIn Learning, Headspace, Aaptiv, Virgin Pulse)
  

• 
  
• HS diploma or equivalent
  
• Ability to apply common sense in performing job
  
• Ability to understand and follow basic instructions and guidelines
  
• Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals
  
• Ability to use basic high school math skills
  
• 2-4 years cable assembly experience
  

• 
  
• Good coordination and flexibility in both hands
  
• Move and occasionally lift up to 50lbs. or more
  
• Good vision including passing color blindness test
  

• Factory environment

• 
  
• Use of safety glasses
  
• Use of steel protective shoes or protective shoe covers
  

• 
  
• ERP and Time clock system Overview
  
• Teledyne Ethics and Harassment training
  
• Hazardous Communications
  
• Quality Systems
  

• Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule and within budget.
• Follow written work instructions.
• Work under minimal supervision on duties and tasks that are frequently non-routine, adapting procedures, techniques, tools, materials and/or equipment to meet special needs.
• May perform more detailed task that require deeper knowledge and experience in the specified processes and procedures.
• Rely on experience and judgment to plan and accomplish assigned goals.
• Able to effectively communicate with other functional departments, such as Engineering, Purchasing, Manufacturing, Engineering, Quality, and Sales departments
• Resolve most questions and problems, referring only the most complex issues to higher levels
• Serve as a resource to others in the resolution of complex problems and issues
• Be a self-starter and demonstrate good decision making ability
• Must maintain a safe work environment by adhering to all safety procedures including those which govern the handling of materials, chemicals, tools, and equipment (WHMIS)
• Proper use of required PPE
• May periodically assist in orienting and training lower level employees
• May participate in LEAN Events, \"Six S\" activities, action teams etc.
• Support, communicate, reinforce and defend the mission, values and culture of the organization
• Perform advanced-level assembly functions, which may include: prep, mechanical, harness, cable, printed circuit board sub-assemblies, spray application, and inspection, typically working from models and/or drawings, within Production
• May perform soldering and installation of components to contract specifications, using a wide range of tools and equipment
• Interpret blueprints, Process Flow Instructions and other written or verbal instructions
• Responsible and accountable for producing quality work to prescribed standards, with a focus on continuous improvement to meet customer commitments on schedule, within budget and to SPC standard practices
• Must be trained across all assembly stages, work w/Engineering to build 1st articles by interpreting print/specification with no process provided and the ability to interpret/assemble all units in dept
• If required, perform all aspects of inspection: in-process, final and source; allocate partial points - 3 points in-process - 3 points final - 4 points source
  

• High school diploma or GED with a minimum of 2 years of experience in specialty area e.g. welding, tool making
  

• Assembles small electronic components and cable assemblies using small hand tools and presses.
• Must be able to keep up with the pace set by the line.
• Work is normally done while seated and tasks are repetitive.
• Uses crimper to crimp cables to put into the connectors.
• Tests the final products to ensure wiring is correct.

• Must have a high school diploma or equivalent
• Must be able to read
• Must be able follow instructions given by team leader or supervisor
• Ability to work independently and within a team environment

• Vision acuity required
• Strong Gripping capabilities
• Gripping with both hands required, however fixtures are occasionally used to hold parts in place
• Must be able to remain in a stationary, generally seated, position for over 50% of the time
• Must be able to lift 5-6 pounds