Cable Commissioning Tests Jobs in Usa

• 
  
• Follows standard work methods on recurring assignments but receives explicit instructions on unfamiliar assignments; technical adequacy of routine work is reviewed on completion; non routine work may also be reviewed in process.
  
• Following specific instructions, assembles or constructs simple or standard equipment or parts; may service or repair simple instruments or equipment.
  
• Conducts a variety of tests using established methods.
  
• Prepares test specimens, adjusts and operates equipment, and records test data, pointing out deviations resulting from equipment malfunction or observational errors.
  
• Extracts engineering data from various prescribed but non standardized sources; processes the data following well-defined methods including elementary algebra and geometry; presents the data in prescribed form.
  
• Other duties may be assigned to include overtime work to complete production requirements.
  

• 
  
• High School diploma and 4 years prior related experience.
  
• Demonstrated ability to read and interpret cable assembly drawings.
  
• Demonstrated ability to read and execute hydrostatic pressure tank procedures.
  
• Ability to obtain L3Harris certification to operate forklifts.
  
• Must be able to lift up to 35 pounds independently.
  
• Must be able to traverse ladders.
  

A Senior Test Engineer job in Miramar, FL 33027 is currently available through Belcan at one of our key aerospace clients. This is a four‑month contract role with the potential to convert to a direct hire. To be considered for this role the candidate will need to have 3-5 years of relevant experience.

Description

The Test Design Engineer is responsible for creating and performing test automation activities consistent with the test lead and test development goals/objectives. This role requires knowledge/experience with automated test software, manufacturing test environment and the ability to interpret test requirements, implement requirement-based test methodologies and trouble shoot & debug test and product issues. Experience with FAA Part 145 in an MRO environment highly desired.

Job Duties:

Specific duties will include:

SW/HW debug, troubleshoot, upgrade and maintain product automated test equipment.

Requirements Analysis/Review for test-ability

Test procedure development, implementation, execution and failure root cause analysis.

Test planning and preparation.

Assess System performance against requirements

Develop code in Veristand, Teststand, LabVIEW to implement test GUIs, drivers and test requirements.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Perform sub-system testing from bench level CCA functional testing to system level burn in testing against an ATP/QTP.

Develop and refine system and board level test cases and procedures.

Trouble shoot subsystem and system level failures to root cause.

Design test fixtures & cables to enable testing.

Perform verification and validation testing on developed Automated Test Equipment (ATE).

Bench test CCAs and test electronic sub-assemblies and rack based test systems (instruments, cables and interfaces).

Trouble shoot subsystem and system level failures to root cause.

Gather, configure and use appropriate test equipment to perform task - Power supplies, DVM, Oscilloscope, electronic loads, custom cables, etc.

Interpret test requirements and electrical test results.

Read electrical schematics.

Test planning, preparation & execution

Required Qualifications:

3 to 5 years of experience

Strong interpersonal skills

Strong analytical skills

B.S. or M.S. in Electrical Engineering, Electrical Engineering Technology, or related discipline desired

Will consider equivalent years of relevant experience in lieu of a formal degree

Experience working with or developing Automated Test Equipment (ATE).

Experience in hardware and test equipment troubleshooting experience.

Knowledge of test automation (HIL) using National Instruments Labview, TestStand and Veristand

Can operate independently

Desired Skills:

Excellent verbal and written communication skills.

Experience working independently and in a collaborative environment

Ability to react to project adjustments and alterations promptly and efficiently

Ability to effectively prioritize and execute tasks in a high-pressure environment

Familiarity with electronic components and common electronic test equipment.

Experienced using lab test equipment, power supplies, DVM, Oscilloscope, electronic loads

Ability to interpret test requirements and electrical test results.

Ability to conduct detailed failure analysis and develop and implement root cause corrective actions.

Experience with GIT, Tortoise SVN, or equivalent software configuration management tools

Previous experience with CAN, UDS, RS232, RS422 & 1553 communication protocols.

Previous experience with programming languages such as C, C++ & C#.

Previous experience with Visual Studio.

Compensation:

This position is offering an salary rate of $52.88 - $62.50/hr, however, Belcan considers several factors when extending an offer, including but not limited to education, experience, geographic location, and discipline. Benefits offered may include health care, dental, vision, life insurance; 401(k); education assistance; paid time off including PTO, holidays, and any other paid leave required by law.

Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws.

• 
  
• The employee is regularly required to sit.
  
• The employee is occasionally required to walk and stand.
  
• The employee frequently is required to use hands to reach, handle or feel objects.
  
• The employee is regularly required to talk and hear.
  
• The employee must regularly lift and/or move up to 10 pounds, occasionally lift and/or move up to 25 pounds.
  
• Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to focus.
  

• The employee may occasionally work near moving mechanical parts. The noise level in the work environment is usually at moderate levels.

Responsibilities:

• Assist with installation, adjustments, and changes to network connections for technical systems.
• Perform work under supervision.
• Install, terminate, test and troubleshoot copper cabling mediums for data infrastructures in a large enterprise environment.
• Properly label, comb and dress cables following site standards and industry standards.
• Able to support 24x7 data center and fab operation to be determined by on call scheduling.
• Must have moderate knowledge in computer literacy skills. Proficiency in Microsoft Office products, traversing of a standard filing system, general typing skills, and familiarity of proper email etiquette.
• Have the ability to work from a request ticket system.
• Have the ability to document one's work proficiently as well aid in the development of Standard Operating Procedures (SOP).
• Occasional support to network team (rack and de-rack network devices, support during HW replacements, hotfix participation to resolve connectivity issues, etc) is expected.
• Work in a team environment.
• Follow all on-site security protocols and Standard Operating Procedures, and comply with all company policies.

Requirements/Minimum Qualifications:

• High school diploma.
• Able to speak, understand, and write English.
• Valid driver's license.
• Must have reliable transportation.
• Must pass a criminal background check.
• Construction experience and knowledge of standard construction safety practices (min. 1 Yr).
• Basic competence for utilization of hand tools.
• Familiarity with cable / construction industry standards.
• Familiarity with copper testing procedures and metrics.
• Must be able to work a Monday through Friday 8 to 5pm schedule.
• Must be willing to work a flexible schedule when needed (pass 5pm or on weekends).
• Must be able to lift 50 pounds, work in elevated areas on ladders upwards of 40 feet, in confined spaces and tight areas for long periods of time.
• Interest and willingness to learn.
• Solid work history.
• Must live within 1 driving hour maximum from Austin and Taylor, TX (North Austin to Taylor area).

Preferred qualifications: (Plus)

• Associates Degree.
• Minimum 2 years of experience in a construction atmosphere.
• Minimum 2 year of work experience in structured cabling.
• Proficient competence for utilization of testing equipment.
• Strong understanding of layer 1 networking infrastructure.

Position Summary

603 Manufacturing is seeking a detail-oriented Cable Assembly Engineer to support the development and optimization of cable and wire harness manufacturing processes. This role is responsible for creating clear, accurate, and efficient work instructions for production teams, ensuring consistent quality and manufacturability of cable assemblies. The ideal candidate has hands-on experience with cable assembly manufacturing and a strong ability to translate engineering documentation into practical, production-ready instructions.

Minimum Qualifications

Education:

• Bachelor’s degree in Mechanical, Electrical Engineering, or a related field required.

Experience:

• 3–5 years of experience creating work instructions for cable assembly manufacturing.
• Experience working in a manufacturing environment involving cable assemblies or wire harnesses.
• Experience with Lean Manufacturing, Six Sigma, and process improvement tools.
• Knowledge of IPC-620 and IPC-620-S.

Knowledge:

• Strong knowledge of manufacturing process development, process validation, and continuous improvement.

Skills:

• Ability to read and interpret electrical schematics, cable drawings, and assembly prints.
• Strong documentation and technical writing skills.
• Proficiency with Microsoft Office (Word, Excel, PowerPoint) and documentation tools.
• Experience with ERP/MRP systems and manufacturing documentation is preferred.
• Strong attention to detail and organizational skills.
• Ability to collaborate effectively with cross-functional teams.

Job Responsibilities

• Develop and maintain detailed work instructions and visual documentation for cable and wire harness assembly processes.
• Interpret customer drawings, schematics, and specifications to create accurate manufacturing documentation.
• Collaborate with production, quality, and engineering teams to ensure processes are efficient, repeatable, and compliant with customer requirements.
• Support new product introduction (NPI) by developing manufacturing processes and documentation.
• Create and maintain Bills of Materials (BOMs), process flows, and routing instructions in the company ERP/MRP system.
• Evaluate assembly processes and recommend improvements to increase efficiency, quality, and throughput.
• Assist with troubleshooting manufacturing issues related to cable assembly processes and documentation.
• Ensure documentation aligns with quality standards and internal procedures.
• Support training of production staff on new or updated work instructions.
• Participate in continuous improvement initiatives within the manufacturing environment.
• Ensure compliance with aerospace, space, and defense industry standards such as AS9100, IPC/WHMA-A-620, NASA STD-8739, and customer-specific requirements.
• Resolve production issues by collaborating with quality and engineering manager to identify root causes and implement corrective actions.

Internal and External Relationships

This position interacts with multiple departments on a regular basis, including engineering and quality. This position will also be highly interactive on the Production floor, working with the Assemblers.

About 603 Manufacturing

Located in Hudson, NH, 603 Manufacturing, a Trexon company, opened for business in 1998. We are an awarded manufacturer of cable assemblies and electro-mechanical assemblies. 603 Manufacturing is truly a diversified contract manufacturer, servicing the Defense, Aerospace, Industrial, Medical & Commercial industries. We offer a comprehensive benefit package including a 9/80 work schedule.

603 Manufacturing is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. 603 Manufacturing is an E-Verify Participant. Pre-employment drug/alcohol/background screening is required.

Fiber Optic Test & Measurement Technician

Salary: 60,000 per year

Perm with excellent benefits.

Location: Newington, NH

Hours: Will be 4 12 hour rotating shifts -Night Shift 6:00pm – 6:30am

Will be responsible for performing detailed electro-optical and electrical testing on fiber optic cables and related systems throughout the production process. This role ensures products meet internal quality standards and contractual specifications by conducting testing, analyzing results, and documenting any non-conformances.

Key Responsibilities

• Perform characterization tests on fiber optic cables, including OTDR, Chromatic Dispersion, Polarization Mode Dispersion, and electrical tests such as High Voltage, Insulation Resistance (IR), and DC Resistance (DCR).
• Analyze test data to ensure compliance with product specifications and quality standards.
• Prepare cable ends and test setups using hand and power tools.
• Document results and generate reports for any failures or non-conforming products.
• Collaborate with manufacturing, quality, and management teams to address testing outcomes and production needs.
• Follow safety protocols, including proper use of PPE and adherence to company safety practices.
• Support continuous improvement initiatives and maintain accurate testing records.
• Respond to multiple production testing assignments as required.

Qualifications

• High school diploma or equivalent required.
• Associate degree in electrical/electronics technology or at least two years of related experience preferred.
• Strong attention to detail, analytical skills, and ability to work independently.
• Basic math skills including fractions, decimals, ratios, and conversions.
• Proficiency with Microsoft Office (Excel, Word, Outlook).
• Effective verbal and written communication skills.
• Flexibility to work different shifts, overtime, and weekends based on production needs.

Job Description

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us.

Boeing Commercial Airplanes is excited to offer opportunities for an Assembler Installer Cable Controlled Systems to join our Joint and Installation team in Everett and Renton, Washington.

As an Assembler Installer for Cable Controlled Systems, you will be pivotal in ensuring the highest standards of quality and safety in the installation and assembly processes. Your expertise will be essential as you perform critical tasks such as reaming, riveting, and setting cable tensions using a tension meter, all while adhering to precise specifications. You will meticulously select and verify parts, ensuring they are free of defects and suitable for installation, while also utilizing blueprints and work orders to guide your work. Your attention to detail will be crucial as you clean surfaces, apply sealants, and conduct thorough inspections to confirm that all assemblies meet regulatory compliance and operational excellence.

You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meet regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation.

Position Responsibilities:

• Perform pickup, rework, authorized changes, and functional checks on work typically installed or assembled by lower classifications.

• Use a tension meter to set cable tension according to specifications.

• Conduct reaming and riveting as necessary to complete work assignments.

• Report job handicaps, such as errors in parts, materials, or assembly procedures, following shop procedures.

• Select appropriate parts, materials, and tools, and work with blueprints, assembly pages, and work orders to install and adjust cable-controlled systems in the aircraft.

• Review bar charts or automated timelines to determine job assignments and obtain necessary drawings.

• Locate work areas using drawings or paperwork that specify airplane and section numbers.

• Verify kitted parts against installation plans and bill of materials to ensure they are correct and free of defects.

• Obtain parts from the Parts Control Area if they are not pre-picked, ensuring they meet specifications.

• Drill, ream, and countersink holes in parts/assemblies per specifications, using appropriate tools.

• Disassemble parts and deburr holes to prepare for fastener installation.

• Use solvents to clean surfaces prior to sealing or assembly, and apply sealants, alodine, primers, adhesives, and special finishes as required.

• Install cable control pulleys and rig control cables according to drawings and specifications.

• Check and adjust actuator motors for full travel of flight control systems using power sources and hand tools.

• Clean the work area and ensure the removal of Foreign Object Debris (FOD) and submit completed jobs or in-process checks to inspectors as required.

• Physical Demands and Potential Hazards:

• Perform physical tasks that include lifting weights ranging from 10-15 lbs to 15-35 lbs.

• Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting.

• Work in environments that may involve contact with metals, solvents, and coolants.

• Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards.

• Adapt to varying noise levels and atmospheric conditions.

• Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties.

This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options.

This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee.

Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered.

Basic Qualifications:

• Experience using hand tools and/or hand-held power tools

• Experience working with safety and quality processes and procedures.

• Basic Computer experience and competency.

• Ability to walk constantly throughout the workday; stand 6-8 hours per day; climb or work from stairs/steps up to 8 hours per day; climb ladders; bend and twist frequently up to six hours per day; squat and kneel.

• Able to perform work at heights up to 50 feet above ground level with appropriate safety gear.

Preferred Qualifications:

• Experience reading and interpreting drawings, specifications,

• material processes, schematic and diagrams

• Attended a Boeing partnered manufacturing related high school or

• Preferred community and technology college academic program

Typical Education & Experience:

High school graduate or GED preferred.

Relocation:

• Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense.

Drug Free Workplace:

Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies.

Union Representation Statement:

This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement.

Shift Work Statement:  

• This position is for a variety of shifts  

Total Rewards & Pay Transparency:

At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities.

The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work.

The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Pay is based upon candidate experience and qualifications, as well as market and business considerations.

Summary pay range: $24.32 – $53.30

Applications for this position will be accepted until Sept. 04, 2026

Language Requirements

English Preferred

Relocation

Relocation assistance is not a negotiable benefit for this position.

Visa Sponsorship

Employer will not sponsor applicants for employment visa status.

Shift

This position is for variable shift

Equal Opportunity Employer:

Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Title: SDET / QA Automation Engineer

Location: Mount Laurel- NJ

Duration: Long Term

Job Description:

Job Summary:

We are seeking a highly skilled and experienced SDET / QA Automation Engineer with 8 to 10 years of expertise in Python, JavaScript, and modern automation frameworks. This position involves developing automation solutions, microservices, and test scripts while validating end‑to‑end network components and their behavior. The candidate should have strong domain knowledge in networking and cable technologies, with the ability to collaborate effectively with clients and cross‑functional teams.

Key Responsibilities:

• Develop microservices using Python, NodeJS, and Golang as part of automation and service validations.
• Develop standalone Python/NodeJS scripts to simulate network traffic and validate performance across different endpoints.
• Create Proof of Concepts (POCs) based on client needs and actively participate in client demos and technical discussions.
• Lead the creation of test strategies and manage test environments with both physical and virtual device setups.
• Create comprehensive test scenarios and automated test scripts using MochaJS, ensuring robust coverage of functional, integration, and regression test cases.
• Design reusable test components, validate API and microservice behavior, and integrate MochaJS test suites into the existing automation framework to enhance reliability and execution efficiency.
• Collaborate with cross‑functional teams to refine requirements, improve test coverage, and ensure smooth integration with CI/CD pipelines.
• Gather requirements and perform detailed analysis for new automation scenarios and test case development.
• Support manual and automation testing across applications, devices, and servers as required.
• Ensure code quality using tools like SonarQube and adhere to strict QA standards.
• Provide technical guidance, troubleshooting support, and mentorship to team members on tasks and issues raised by the client.
• Maintain version control and branching strategies using GitHub, ensuring high code integrity and traceability.
• Monitor automation execution, analyze failures, and drive root‑cause investigations to improve overall product quality.
• Document technical workflows, automation processes, and test scenarios to ensure long-term maintainability and knowledge sharing.

Required Skills & Experience:

• 8-10 years of experience in QA/SDET automation roles.
• Strong programming knowledge with Python and JavaScript.
• Good hands-on experience with Go Lang and NodeJS.
• Hands-on experience with MochaJS for scripting and automated testing.
• Excellent knowledge with web technologies like REST, SOAP, XML and JSON
• Proficiency in API testing using Bruno/ Postman.
• Familiarity with GitHub for version control and Jira for project tracking.
• Excellent domain knowledge in Network and cable domain
• Should be familiar with IMS architecture and SIP protocols.
• Good problem-solving and debugging skills.

Should have good communication and client interaction skills.

JOB DESCRIPTION

We are seeking an experienced Cable & Harness Technician II and III to support aerospace manufacturing in Gilbert, AZ. This is a hands‑on, on‑site role focused on building complex space‑flight cable and wire harness assemblies in a high‑reliability environment.

What You’ll Do

• Build and assemble complex cable and wire harnesses from schematics, wiring diagrams, and wire lists
• Perform connectorization, point‑to‑point wiring, and heavy soldering of large wire bundles
• Work in an ESD/FOD‑controlled manufacturing environment
• Lay out and build harnesses using harness boards
• Mix and apply bonding, potting, and encapsulation materials
• Use soldering irons, heat guns, tweezers, and hand tools
• Maintain clean, organized workstations and follow aerospace workmanship standards

REQUIRED SKILLS AND EXPERIENCE

• High School Diploma or GED
• 2-6 years electrical assembly and wiring experience
• Experience with the following: (will help them get cert but must have knowledge)
• IPC 620 or IPC WHMA‑A‑620
• J‑STD
• Experience reading drawings and wiring diagrams